DTtTrigDBValidation.cc

Go to the documentation of this file.

#include "DQMOffline/CalibMuon/interface/DTtTrigDBValidation.h"
 
// Framework
#include "FWCore/Framework/interface/ESHandle.h"
#include "FWCore/Framework/interface/Event.h"
#include "FWCore/Framework/interface/EventSetup.h"
#include "FWCore/ServiceRegistry/interface/Service.h"
 
#include "DQMServices/Core/interface/DQMStore.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"
 
// Geometry
#include "Geometry/DTGeometry/interface/DTTopology.h"
 
// DataFormats
#include "DataFormats/MuonDetId/interface/DTSuperLayerId.h"
 
#include "TFile.h"
#include <cmath>
#include <cstdio>
#include <sstream>
 
using namespace edm;
using namespace std;
 
DTtTrigDBValidation::DTtTrigDBValidation(const ParameterSet &pset)
    : metname_("TTrigDBValidation"),
      labelDBRef_(esConsumes(edm::ESInputTag("", pset.getParameter<string>("labelDBRef")))),
      labelDB_(esConsumes(edm::ESInputTag("", pset.getParameter<string>("labelDB")))),
      lowerLimit_(pset.getUntrackedParameter<int>("lowerLimit", 1)),
      higherLimit_(pset.getUntrackedParameter<int>("higherLimit", 3)),
      muonGeomToken_(esConsumes()) {
  LogVerbatim(metname_) << "[DTtTrigDBValidation] Constructor called!";
}
 
DTtTrigDBValidation::~DTtTrigDBValidation() {}
 
void DTtTrigDBValidation::bookHistograms(DQMStore::IBooker &iBooker, edm::Run const &, edm::EventSetup const &setup) {
  LogVerbatim(metname_) << "[DTtTrigDBValidation] Parameters initialization";
  iBooker.setCurrentFolder("DT/DtCalib/TTrigDBValidation");
 
  DTTtrigRefMap = &setup.getData(labelDBRef_);
  LogVerbatim(metname_) << "[DTtTrigDBValidation] reference Ttrig version: " << DTTtrigRefMap->version();
 
  DTTtrigMap = &setup.getData(labelDB_);
  LogVerbatim(metname_) << "[DTtTrigDBValidation] Ttrig to validate version: " << DTTtrigMap->version();
 
  // book&reset the summary histos
  for (int wheel = -2; wheel <= 2; wheel++) {
    bookHistos(iBooker, wheel);
    tTrigDiffWheel_[wheel]->Reset();
  }
 
  // Get the geometry
  dtGeom = &setup.getData(muonGeomToken_);
 
  // Loop over Ref DB entries
  for (DTTtrig::const_iterator it = DTTtrigRefMap->begin(); it != DTTtrigRefMap->end(); ++it) {
    DTSuperLayerId slId((*it).first.wheelId, (*it).first.stationId, (*it).first.sectorId, (*it).first.slId);
    float tTrigMean;
    float tTrigRms;
    float kFactor;
    DTTtrigRefMap->get(slId, tTrigMean, tTrigRms, kFactor, DTTimeUnits::ns);
    float tTrigCorr = tTrigMean + kFactor * tTrigRms;
    LogTrace(metname_) << "Ref Superlayer: " << slId << "\n"
                       << " Ttrig mean (ns): " << tTrigMean << " Ttrig rms (ns): " << tTrigRms
                       << " Ttrig k-Factor: " << kFactor << " Ttrig value (ns): " << tTrigCorr;
 
    // tTrigRefMap[slId] = std::pair<float,float>(tTrigmean,tTrigrms);
    tTrigRefMap_[slId] = pair<float, float>(tTrigCorr, tTrigRms);
  }
 
  // Loop over Ref DB entries
  for (DTTtrig::const_iterator it = DTTtrigMap->begin(); it != DTTtrigMap->end(); ++it) {
    DTSuperLayerId slId((*it).first.wheelId, (*it).first.stationId, (*it).first.sectorId, (*it).first.slId);
    float tTrigMean;
    float tTrigRms;
    float kFactor;
    DTTtrigMap->get(slId, tTrigMean, tTrigRms, kFactor, DTTimeUnits::ns);
    float tTrigCorr = tTrigMean + kFactor * tTrigRms;
    LogTrace(metname_) << "Superlayer: " << slId << "\n"
                       << " Ttrig mean (ns): " << tTrigMean << " Ttrig rms (ns): " << tTrigRms
                       << " Ttrig k-Factor: " << kFactor << " Ttrig value (ns): " << tTrigCorr;
 
    // tTrigMap[slId] = std::pair<float,float>(tTrigmean,tTrigrms);
    tTrigMap_[slId] = pair<float, float>(tTrigCorr, tTrigRms);
  }
 
  for (map<DTSuperLayerId, pair<float, float>>::const_iterator it = tTrigRefMap_.begin(); it != tTrigRefMap_.end();
       ++it) {
    if (tTrigMap_.find((*it).first) == tTrigMap_.end())
      continue;
 
    // compute the difference
    float difference = tTrigMap_[(*it).first].first - (*it).second.first;
 
    // book histo
    int wheel = (*it).first.chamberId().wheel();
    int sector = (*it).first.chamberId().sector();
    if (tTrigDiffHistos_.find(make_pair(wheel, sector)) == tTrigDiffHistos_.end())
      bookHistos(iBooker, wheel, sector);
 
    LogTrace(metname_) << "Filling histos for super-layer: " << (*it).first << "  difference: " << difference;
 
    // Fill the test histos
    int entry = -1;
    int station = (*it).first.chamberId().station();
    if (station == 1)
      entry = 0;
    if (station == 2)
      entry = 3;
    if (station == 3)
      entry = 6;
    if (station == 4)
      entry = 9;
 
    int slBin = entry + (*it).first.superLayer();
    if (slBin == 12)
      slBin = 11;
 
    tTrigDiffHistos_[make_pair(wheel, sector)]->setBinContent(slBin, difference);
    if (abs(difference) < lowerLimit_) {
      tTrigDiffWheel_[wheel]->setBinContent(slBin, sector, 1);
    } else if (abs(difference) < higherLimit_) {
      tTrigDiffWheel_[wheel]->setBinContent(slBin, sector, 2);
    } else {
      tTrigDiffWheel_[wheel]->setBinContent(slBin, sector, 3);
    }
 
  }  // Loop over the tTrig map reference
}
 
void DTtTrigDBValidation::bookHistos(DQMStore::IBooker &iBooker, int wheel, int sector) {
  LogTrace(metname_) << "   Booking histos for Wheel, Sector: " << wheel << ", " << sector;
 
  // Compose the chamber name
  stringstream str_wheel;
  str_wheel << wheel;
  stringstream str_sector;
  str_sector << sector;
 
  string lHistoName = "_W" + str_wheel.str() + "_Sec" + str_sector.str();
 
  iBooker.setCurrentFolder("DT/DtCalib/TTrigDBValidation/Wheel" + str_wheel.str());
 
  // Create the monitor elements
  MonitorElement *hDifference;
  hDifference = iBooker.book1D("TTrigDifference" + lHistoName, "difference between the two tTrig values", 11, 0, 11);
 
  pair<int, int> mypair(wheel, sector);
  tTrigDiffHistos_[mypair] = hDifference;
 
  (tTrigDiffHistos_[mypair])->setBinLabel(1, "MB1_SL1", 1);
  (tTrigDiffHistos_[mypair])->setBinLabel(2, "MB1_SL2", 1);
  (tTrigDiffHistos_[mypair])->setBinLabel(3, "MB1_SL3", 1);
  (tTrigDiffHistos_[mypair])->setBinLabel(4, "MB2_SL1", 1);
  (tTrigDiffHistos_[mypair])->setBinLabel(5, "MB2_SL2", 1);
  (tTrigDiffHistos_[mypair])->setBinLabel(6, "MB2_SL3", 1);
  (tTrigDiffHistos_[mypair])->setBinLabel(7, "MB3_SL1", 1);
  (tTrigDiffHistos_[mypair])->setBinLabel(8, "MB3_SL2", 1);
  (tTrigDiffHistos_[mypair])->setBinLabel(9, "MB3_SL3", 1);
  (tTrigDiffHistos_[mypair])->setBinLabel(10, "MB4_SL1", 1);
  (tTrigDiffHistos_[mypair])->setBinLabel(11, "MB4_SL3", 1);
}
 
// Book the summary histos
void DTtTrigDBValidation::bookHistos(DQMStore::IBooker &iBooker, int wheel) {
  stringstream wh;
  wh << wheel;
 
  iBooker.setCurrentFolder("DT/DtCalib/TTrigDBValidation");
  tTrigDiffWheel_[wheel] = iBooker.book2D(
      "TTrigDifference_W" + wh.str(), "W" + wh.str() + ": summary of tTrig differences", 11, 1, 12, 14, 1, 15);
  tTrigDiffWheel_[wheel]->setBinLabel(1, "MB1_SL1", 1);
  tTrigDiffWheel_[wheel]->setBinLabel(2, "MB1_SL2", 1);
  tTrigDiffWheel_[wheel]->setBinLabel(3, "MB1_SL3", 1);
  tTrigDiffWheel_[wheel]->setBinLabel(4, "MB2_SL1", 1);
  tTrigDiffWheel_[wheel]->setBinLabel(5, "MB2_SL2", 1);
  tTrigDiffWheel_[wheel]->setBinLabel(6, "MB2_SL3", 1);
  tTrigDiffWheel_[wheel]->setBinLabel(7, "MB3_SL1", 1);
  tTrigDiffWheel_[wheel]->setBinLabel(8, "MB3_SL2", 1);
  tTrigDiffWheel_[wheel]->setBinLabel(9, "MB3_SL3", 1);
  tTrigDiffWheel_[wheel]->setBinLabel(10, "MB4_SL1", 1);
  tTrigDiffWheel_[wheel]->setBinLabel(11, "MB4_SL3", 1);
}
 
int DTtTrigDBValidation::stationFromBin(int bin) const { return (int)(bin / 3.1) + 1; }
 
int DTtTrigDBValidation::slFromBin(int bin) const {
  int ret = bin % 3;
  if (ret == 0 || bin == 11)
    ret = 3;
 
  return ret;
}
 
void DTtTrigDBValidation::analyze(const edm::Event &, const edm::EventSetup &) {}