#include <MeasurementCOPS.h>

Inheritance diagram for MeasurementCOPS:

Public Member Functions
void	calculateSimulatedValue (ALIbool firstTime) override

void	correctValueAndSigma () override

	MeasurementCOPS ()

	MeasurementCOPS (const ALIint measdim, ALIstring &type, ALIstring &name)

void	setConversionFactor (const std::vector< ALIstring > &wordlist) override

void	setXlaserLine (unsigned int ii, int val) override

int	xlaserLine (unsigned int ii) override

	~MeasurementCOPS () override

Public Member Functions inherited from Measurement
void	addAffectingEntriesFromOptO (const OpticalObject *optoP)

void	AddOptOListItem (OpticalObject *opto)

void	AddOptONameListItem (ALIstring optos)

const std::vector< Entry * > &	affectingEntryList () const

void	buildAffectingEntryList ()

void	buildOptOList ()

virtual void	buildOptONamesList (const std::vector< ALIstring > &wl)

void	calculateOriginalSimulatedValue ()

void	construct ()

void	constructFromOA (OpticalAlignMeasurementInfo &measInfo)

void	copyMeas (Measurement *meas, const std::string &subsstr1, const std::string &subsstr2)

std::vector< ALIdouble >	DerivativeRespectEntry (Entry *entry)

const ALIuint	dim () const

void	DumpBadOrderOptOs ()

void	fillData (ALIuint coor, const std::vector< ALIstring > &wl)

void	fillData (ALIuint coor, OpticalAlignParam *oaParam)

const CLHEP::Hep3Vector &	getLightRayDirection () const

const CLHEP::Hep3Vector &	getLightRayPosition () const

ALIstring	getMeasuringBehaviour (const std::vector< OpticalObject * >::const_iterator vocite)

const OpticalObject *	getPreviousOptO (const OpticalObject *Popto) const

	Measurement ()

	Measurement (const ALIint measdim, ALIstring &type, ALIstring &name)

const ALIstring &	name () const

const std::vector< OpticalObject * > &	OptOList () const

const std::vector< ALIstring > &	OptONameList () const

void	postConstruct ()

const ALIstring &	sensorName ()

void	SetDimension (ALIuint dim)

void	setLightRayDirection (const CLHEP::Hep3Vector &lightRayDirection)

void	setLightRayPosition (const CLHEP::Hep3Vector &lightRayPosition)

void	setName ()

void	setSigma (ALIint coor, ALIdouble val)

void	setType (ALIstring type)

void	setValue (ALIint coor, ALIdouble val)

void	setValueSimulated (ALIint coor, ALIdouble value)

void	setValueSimulated_orig (ALIint coor, ALIdouble value)

const ALIdouble *	sigma () const

const ALIdouble	sigma (ALIuint ii) const

virtual const ALIdouble	sigmaDimensionFactor () const

const ALIstring &	type () const

const ALIdouble *	value () const

const ALIdouble	value (ALIuint ii) const

virtual const ALIdouble	valueDimensionFactor () const

bool	valueIsSimulated (ALIint coor)

const ALIdouble	valueSimulated (ALIuint ii) const

const ALIdouble	valueSimulated_orig (ALIuint ii) const

const ALIstring	valueType (ALIuint ii) const

virtual	~Measurement ()

Private Attributes
ALIdouble	theDisplace [4]

ALIint	theXlaserLine [4]

Additional Inherited Members
Static Public Member Functions inherited from Measurement
static ALIstring	getCurrentDate ()

static ALIstring	getCurrentTime ()

static ALIstring &	measurementsFileName ()

static void	setCurrentDate (const std::vector< ALIstring > &wl)
	set the date of the current measurement More...

static void	setMeasurementsFileName (const ALIstring &filename)

Static Public Attributes inherited from Measurement
static ALIdouble	cameraScaleFactor = 1.

static ALIbool	only1 = false

static ALIstring	only1Date = ""

static ALIstring	only1Time = ""

Protected Member Functions inherited from Measurement
void	printStartCalculateSimulatedValue (const Measurement *meas)

void	Substitute2p (ALIstring &ref, const ALIstring &firstref, int NtwoPoints)

Detailed Description

Definition at line 18 of file MeasurementCOPS.h.

Constructor & Destructor Documentation

◆ MeasurementCOPS() [1/2]

MeasurementCOPS::MeasurementCOPS	(	const ALIint	measdim,
		ALIstring &	type,
		ALIstring &	name
	)

inline

Definition at line 20 of file MeasurementCOPS.h.

                                                                           : Measurement(measdim, type, name) {
     for (unsigned int ii = 0; ii < 4; ii++)
       theXlaserLine[ii] = -1;
   };

References cuy::ii, and theXlaserLine.

◆ MeasurementCOPS() [2/2]

MeasurementCOPS::MeasurementCOPS ( )

inline

Definition at line 24 of file MeasurementCOPS.h.

24 {};

◆ ~MeasurementCOPS()

MeasurementCOPS::~MeasurementCOPS ( )

inlineoverride

Definition at line 25 of file MeasurementCOPS.h.

25 {};

Member Function Documentation

◆ calculateSimulatedValue()

void MeasurementCOPS::calculateSimulatedValue ( ALIbool firstTime )

overridevirtual

Reimplemented from Measurement.

Definition at line 25 of file MeasurementCOPS.cc.

                                                                {
   if (ALIUtils::debug >= 2)
     printStartCalculateSimulatedValue(this);  // important for Examples/FakeMeas
  
   //---------- Create light ray
   LightRay* lightray = new LightRay;
  
   //---------- Define types of OptO that may take part in the Measurement
   ALIuint isec = 0;  //security variable to check OptOList().size()
  
   //---------- Loop list of OptO that take part in measurement
   std::vector<OpticalObject*>::const_iterator vocite = OptOList().begin();
   if (ALIUtils::debug >= 5)
     std::cout << "OptOList size" << OptOList().size() << std::endl;
  
   //----- Check that first object is 'Xlaser'
   if ((*vocite)->type() != "Xlaser") {
     std::cerr << "!!ERROR MeasurementCOPS: first Optical object should be 'Xlaser'" << std::endl;
     DumpBadOrderOptOs();
     exit(1);
   }
  
   //---------- Check that last object is a COPS Sensor (that makes measuremnt and kill the lightray)
   if ((*(OptOList().end() - 1))->type() != "COPS") {
     std::cerr << "!!ERROR MeasurementCOPS: last Optical object should be 'COPS'" << std::endl;
     DumpBadOrderOptOs();
     exit(1);
   }
  
 #ifdef COCOA_VIS
   ALIVisLightPath* vispath = 0;
   if (ALIUtils::getFirstTime()) {
     GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
     if (gomgr->GlobalOptions()["VisWriteIguana"] > 1) {
       vispath = IgCocoaFileMgr::getInstance().newLightPath(name());
     }
   }
 #endif
   std::cout << (vocite == OptOList().end()) << " vocite " << (*vocite)->name() << std::endl;
   while (vocite != OptOList().end()) {
     if (ALIUtils::debug >= -2)
       std::cout << std::endl << "@@@@ LR:OBJECT " << (*vocite)->name() << std::endl;
     isec++;
  
     //---------- Get the behaviour of the object w.r.t the measurement (if it reflects the light, let it traverse it, ...)
     ALIstring behav = getMeasuringBehaviour(vocite);
  
     if (lightray) {
       (*vocite)->participateInMeasurement(*lightray, *this, behav);
 #ifdef COCOA_VIS
       if (ALIUtils::getFirstTime()) {
         GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
         if (gomgr->GlobalOptions()["VisWriteVRML"] > 1) {
           ALIVRMLMgr::getInstance().addLightPoint(lightray->point());
           //      std::cout << "ALIVRMLMg  addLightPoint " << lightray->point() << (*vocite)->name() << std::endl;
         }
         if (gomgr->GlobalOptions()["VisWriteIguana"] > 1) {
           vispath->addLightPoint(lightray->point(), *vocite);
         }
       }
 #endif
     } else {
       std::cerr << "!! Last object is not Sensor 2D in measurement " << name() << std::endl;
       DumpBadOrderOptOs();
       exit(1);
     }
  
     ++vocite;
     if (isec > OptOList().size()) {
       std::cerr << "ERROR DE PROGRAMACION EN GetSimulatedValue" << std::endl;
       exit(5);
     }
   }
  
   if (ALIUtils::debug >= 9)
     std::cout << "end calculateSimulatedValue" << std::endl;
  
   delete lightray;
 }

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, gather_cfg::cout, ALIUtils::debug, Measurement::DumpBadOrderOptOs(), mps_fire::end, beamvalidation::exit(), ALIUtils::getFirstTime(), GlobalOptionMgr::getInstance(), Measurement::getMeasuringBehaviour(), GlobalOptionMgr::GlobalOptions(), Measurement::name(), Measurement::OptOList(), LightRay::point(), Measurement::printStartCalculateSimulatedValue(), findQualityFiles::size, and Measurement::type().

◆ correctValueAndSigma()

void MeasurementCOPS::correctValueAndSigma ( )

overridevirtual

Reimplemented from Measurement.

Definition at line 134 of file MeasurementCOPS.cc.

                                            {
   //---------- Make  displacement
   ALIuint ii;
   for (ii = 0; ii < dim(); ii++) {
     ALIdouble val = value()[ii];
     val += theDisplace[ii];
     if (ALIUtils::debug >= 9)
       std::cout << "MeasurementCOPS::correctValueAndSigma: old value X " << value()[ii] << " new " << val << " +- "
                 << std::endl;
     setValue(ii, val);
   }
 }

References gather_cfg::cout, ALIUtils::debug, Measurement::dim(), cuy::ii, Measurement::setValue(), theDisplace, heppy_batch::val, and Measurement::value().

◆ setConversionFactor()

void MeasurementCOPS::setConversionFactor ( const std::vector< ALIstring > & wordlist )

overridevirtual

Reimplemented from Measurement.

Definition at line 110 of file MeasurementCOPS.cc.

                                                                               {
   //--------- Set it to 0
   ALIuint ii;
   for (ii = 0; ii < dim(); ii++) {
     theDisplace[ii] = 0.;
   }
  
   //--------- Check that the format is OK
   if (wordlist.size() == 1)
     return;
   if (wordlist.size() != 3 || !ALIUtils::IsNumber(wordlist[1]) || !ALIUtils::IsNumber(wordlist[2]) ||
       !ALIUtils::IsNumber(wordlist[3]) || !ALIUtils::IsNumber(wordlist[4])) {
     std::cerr << "!! SensorCOPS Measurement setConversionFactor: WRONG FORMAT " << std::endl
               << "It should be: SENSOR2D displace_U displace_D displace_L displace_R " << std::endl
               << "It is: ";
     ALIUtils::dumpVS(wordlist, " ", std::cerr);
     exit(1);
   }
  
   for (ii = 0; ii < dim(); ii++) {
     theDisplace[ii] = atof(wordlist[ii + 1].c_str()) * valueDimensionFactor();
   }
 }

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, Measurement::dim(), ALIUtils::dumpVS(), beamvalidation::exit(), cuy::ii, ALIUtils::IsNumber(), theDisplace, and Measurement::valueDimensionFactor().

◆ setXlaserLine()

void MeasurementCOPS::setXlaserLine	(	unsigned int	ii,
		int	val
	)

inlineoverridevirtual

Reimplemented from Measurement.

Definition at line 36 of file MeasurementCOPS.h.

36 { theXlaserLine[ii] = val; };

◆ xlaserLine()

int MeasurementCOPS::xlaserLine ( unsigned int ii )

inlineoverridevirtual

Reimplemented from Measurement.

Definition at line 35 of file MeasurementCOPS.h.

35 { return theXlaserLine[ii]; }

References cuy::ii, and theXlaserLine.

Member Data Documentation

◆ theDisplace

ALIdouble MeasurementCOPS::theDisplace[4]

private

Definition at line 36 of file MeasurementCOPS.h.

Referenced by correctValueAndSigma(), and setConversionFactor().

◆ theXlaserLine

ALIint MeasurementCOPS::theXlaserLine[4]

private

Definition at line 41 of file MeasurementCOPS.h.

Referenced by MeasurementCOPS(), and xlaserLine().

Public Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ MeasurementCOPS() [1/2]

◆ MeasurementCOPS() [2/2]

◆ ~MeasurementCOPS()

Member Function Documentation

◆ calculateSimulatedValue()

◆ correctValueAndSigma()

◆ setConversionFactor()

◆ setXlaserLine()

◆ xlaserLine()

Member Data Documentation

◆ theDisplace

◆ theXlaserLine