magneticfield::BaseVolumeHandle Class Reference

#include <BaseVolumeHandle.h>

Inheritance diagram for magneticfield::BaseVolumeHandle:

Public Types
typedef Surface::GlobalPoint	GlobalPoint
typedef Surface::LocalPoint	LocalPoint
typedef Surface::LocalVector	LocalVector
typedef SurfaceOrientation::GlobalFace	Sides

Public Member Functions
	BaseVolumeHandle (bool expand2Pi=false, bool debugVal=false)
	BaseVolumeHandle (const BaseVolumeHandle &v)=delete
const GlobalPoint &	center () const
	Return the center of the volume. More...
bool	isIron () const
	Temporary hack to pass information on material. Will eventually be replaced! More...
bool	isPlaneMatched (int which_side) const
	if the specified surface has been matched. More...
Geom::Phi< float >	maxPhi () const
	Maximum value of phi covered by the volume. More...
double	maxZ () const
Geom::Phi< float >	minPhi () const
	Minimum value of phi covered by the volume. More...
double	minR () const
	Minimum R for any point within the volume. More...
double	minZ () const
	Z limits. More...
const GloballyPositioned< float > *	placement () const
	Position and rotation. More...
int	references (int which_side) const
const double	RN () const
	Distance of (x,y) plane from origin. More...
bool	sameSurface (const Surface &s1, Sides which_side, float tolerance=0.01)
	Find out if two surfaces are the same physical surface. More...
bool	setSurface (const Surface &s1, Sides which_side)
	Assign a shared surface perorming sanity checks. More...
virtual DDSolidShape	shape () const =0
	Shape of the solid. More...
virtual std::vector< VolumeSide >	sides () const =0
	The surfaces and they orientation, as required to build a MagVolume. More...
const Surface &	surface (int which_side) const
	Get the current surface on specified side. More...
const Surface &	surface (Sides which_side) const
bool	toExpand () const
virtual	~BaseVolumeHandle ()

Public Attributes
unsigned short	copyno
	copy number More...
std::string	magFile
	Name of magnetic field table file. More...
MagVolume6Faces *	magVolume
	Pointer to the final MagVolume (must be set from outside) More...
int	masterSector
	The sector for which an interpolator for this class of volumes should be built. More...
std::string	name
	Name of the volume. More...
unsigned short	volumeno
	volume number More...

Protected Types
typedef ConstReferenceCountingPointer< Surface >	RCPS

Protected Member Functions
void	buildPhiZSurf (double startPhi, double deltaPhi, double zhalf, double rCentr)

Protected Attributes
GlobalPoint	center_
const bool	debug
bool	expand
bool	isAssigned [6]
bool	isIronFlag
GloballyPositioned< float > *	refPlane
RCPS	surfaces [6]
Geom::Phi< float >	thePhiMin
double	theRMax
double	theRMin
double	theRN

Detailed Description

Definition at line 22 of file BaseVolumeHandle.h.

Member Typedef Documentation

GlobalPoint

typedef Surface::GlobalPoint magneticfield::BaseVolumeHandle::GlobalPoint

Definition at line 24 of file BaseVolumeHandle.h.

LocalPoint

typedef Surface::LocalPoint magneticfield::BaseVolumeHandle::LocalPoint

Definition at line 25 of file BaseVolumeHandle.h.

LocalVector

typedef Surface::LocalVector magneticfield::BaseVolumeHandle::LocalVector

Definition at line 26 of file BaseVolumeHandle.h.

RCPS

typedef ConstReferenceCountingPointer<Surface> magneticfield::BaseVolumeHandle::RCPS

protected

Definition at line 117 of file BaseVolumeHandle.h.

Sides

typedef SurfaceOrientation::GlobalFace magneticfield::BaseVolumeHandle::Sides

Definition at line 27 of file BaseVolumeHandle.h.

Constructor & Destructor Documentation

BaseVolumeHandle() [1/2]

BaseVolumeHandle::BaseVolumeHandle	(	bool	expand2Pi = false,
		bool	debugVal = false
	)

Definition at line 24 of file BaseVolumeHandle.cc.

    : magVolume(nullptr),
      masterSector(1),
      theRN(0.),
      theRMin(0.),
      theRMax(0.),
      refPlane(nullptr),
      expand(expand2Pi),
      isIronFlag(false),
      debug(debugVal) {}

BaseVolumeHandle() [2/2]

magneticfield::BaseVolumeHandle::BaseVolumeHandle ( const BaseVolumeHandle &  v )

delete

~BaseVolumeHandle()

BaseVolumeHandle::~BaseVolumeHandle ( )

virtual

Definition at line 35 of file BaseVolumeHandle.cc.

                                    {
  if (refPlane != nullptr) {
    delete refPlane;
    refPlane = nullptr;
  }
}

References refPlane.

Member Function Documentation

buildPhiZSurf()

void BaseVolumeHandle::buildPhiZSurf ( double  startPhi, double  deltaPhi, double  zhalf, double  rCentr  )

protected

Definition at line 44 of file BaseVolumeHandle.cc.

                                                                                                  {
  // This is 100% equal for cons and tubs!!!
 
  GlobalVector planeXAxis = refPlane->toGlobal(LocalVector(1, 0, 0));
  GlobalVector planeYAxis = refPlane->toGlobal(LocalVector(0, 1, 0));
  GlobalVector planeZAxis = refPlane->toGlobal(LocalVector(0, 0, 1));
 
  // Local Y axis of the faces at +-phi.
  GlobalVector y_phiplus = refPlane->toGlobal(LocalVector(cos(startPhi + deltaPhi), sin(startPhi + deltaPhi), 0.));
  GlobalVector y_phiminus = refPlane->toGlobal(LocalVector(cos(startPhi), sin(startPhi), 0.));
 
  Surface::RotationType rot_Z(planeXAxis, planeYAxis);
  Surface::RotationType rot_phiplus(planeZAxis, y_phiplus);
  Surface::RotationType rot_phiminus(planeZAxis, y_phiminus);
 
  GlobalPoint pos_zplus(center_.x(), center_.y(), center_.z() + zhalf);
  GlobalPoint pos_zminus(center_.x(), center_.y(), center_.z() - zhalf);
  // BEWARE: in this case, the origin for phiplus,phiminus surfaces is
  // at radius R and not on a plane passing by center_ orthogonal to the radius.
  GlobalPoint pos_phiplus(
      refPlane->toGlobal(LocalPoint(rCentr * cos(startPhi + deltaPhi), rCentr * sin(startPhi + deltaPhi), 0.)));
  GlobalPoint pos_phiminus(refPlane->toGlobal(LocalPoint(rCentr * cos(startPhi), rCentr * sin(startPhi), 0.)));
  surfaces[zplus] = new Plane(pos_zplus, rot_Z);
  surfaces[zminus] = new Plane(pos_zminus, rot_Z);
  surfaces[phiplus] = new Plane(pos_phiplus, rot_phiplus);
  surfaces[phiminus] = new Plane(pos_phiminus, rot_phiminus);
 
  if (debug) {
    cout << "Actual Center at: " << center_ << " R " << center_.perp() << " phi " << center_.phi() << endl;
    cout << "RN            " << theRN << endl;
 
    cout << "pos_zplus    " << pos_zplus << " " << pos_zplus.perp() << " " << pos_zplus.phi() << endl
         << "pos_zminus   " << pos_zminus << " " << pos_zminus.perp() << " " << pos_zminus.phi() << endl
         << "pos_phiplus  " << pos_phiplus << " " << pos_phiplus.perp() << " " << pos_phiplus.phi() << endl
         << "pos_phiminus " << pos_phiminus << " " << pos_phiminus.perp() << " " << pos_phiminus.phi() << endl;
 
    cout << "y_phiplus  " << y_phiplus << endl;
    cout << "y_phiminus " << y_phiminus << endl;
 
    cout << "rot_Z    " << surfaces[zplus]->toGlobal(LocalVector(0., 0., 1.)) << endl
         << "rot_phi+ " << surfaces[phiplus]->toGlobal(LocalVector(0., 0., 1.)) << " phi "
         << surfaces[phiplus]->toGlobal(LocalVector(0., 0., 1.)).phi() << endl
         << "rot_phi- " << surfaces[phiminus]->toGlobal(LocalVector(0., 0., 1.)) << " phi "
         << surfaces[phiminus]->toGlobal(LocalVector(0., 0., 1.)).phi() << endl;
  }
 
  //   // Check ordering.
  if (debug) {
    if (pos_zplus.z() < pos_zminus.z()) {
      cout << "*** WARNING: pos_zplus < pos_zminus " << endl;
    }
    if (Geom::Phi<float>(pos_phiplus.phi() - pos_phiminus.phi()) < 0.) {
      cout << "*** WARNING: pos_phiplus < pos_phiminus " << endl;
    }
  }
}

References center_, funct::cos(), gather_cfg::cout, debug, SiPixelRawToDigiRegional_cfi::deltaPhi, PV3DBase< T, PVType, FrameType >::perp(), PV3DBase< T, PVType, FrameType >::phi(), SurfaceOrientation::phiminus, SurfaceOrientation::phiplus, refPlane, funct::sin(), surfaces, theRN, GloballyPositioned< T >::toGlobal(), PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), PV3DBase< T, PVType, FrameType >::z(), SurfaceOrientation::zminus, and SurfaceOrientation::zplus.

center()

const Surface::GlobalPoint & BaseVolumeHandle::center

(

)

const

Return the center of the volume.

Definition at line 42 of file BaseVolumeHandle.cc.

{ return center_; }

References center_.

Referenced by magneticfield::MagGeoBuilder::buildInterpolator(), MagGeoBuilderFromDDD::buildInterpolator(), magneticfield::LessZ::operator()(), magneticfield::volumeHandle::volumeHandle(), and MagGeoBuilderFromDDD::volumeHandle::volumeHandle().

isIron()

bool magneticfield::BaseVolumeHandle::isIron ( ) const

inline

Temporary hack to pass information on material. Will eventually be replaced!

Definition at line 108 of file BaseVolumeHandle.h.

{ return isIronFlag; }

References isIronFlag.

isPlaneMatched()

bool magneticfield::BaseVolumeHandle::isPlaneMatched ( int  which_side ) const

inline

if the specified surface has been matched.

Definition at line 55 of file BaseVolumeHandle.h.

{ return isAssigned[which_side]; }

References isAssigned.

maxPhi()

Geom::Phi<float> magneticfield::BaseVolumeHandle::maxPhi ( ) const

inline

Maximum value of phi covered by the volume.

Definition at line 85 of file BaseVolumeHandle.h.

{ return surface(SurfaceOrientation::phiplus).position().phi(); }

References PV3DBase< T, PVType, FrameType >::phi(), SurfaceOrientation::phiplus, GloballyPositioned< T >::position(), and surface().

maxZ()

double magneticfield::BaseVolumeHandle::maxZ ( ) const

inline

Definition at line 91 of file BaseVolumeHandle.h.

{ return surface(SurfaceOrientation::zplus).position().z(); }

References GloballyPositioned< T >::position(), surface(), PV3DBase< T, PVType, FrameType >::z(), and SurfaceOrientation::zplus.

minPhi()

Geom::Phi<float> magneticfield::BaseVolumeHandle::minPhi ( ) const

inline

Minimum value of phi covered by the volume.

Definition at line 80 of file BaseVolumeHandle.h.

{ return thePhiMin; }

References thePhiMin.

minR()

double magneticfield::BaseVolumeHandle::minR ( ) const

inline

Minimum R for any point within the volume.

Definition at line 94 of file BaseVolumeHandle.h.

{ return theRMin; }

References theRMin.

minZ()

double magneticfield::BaseVolumeHandle::minZ ( ) const

inline

Z limits.

Definition at line 90 of file BaseVolumeHandle.h.

{ return surface(SurfaceOrientation::zminus).position().z(); }

References GloballyPositioned< T >::position(), surface(), PV3DBase< T, PVType, FrameType >::z(), and SurfaceOrientation::zminus.

placement()

const GloballyPositioned<float>* magneticfield::BaseVolumeHandle::placement ( ) const

inline

Position and rotation.

Definition at line 97 of file BaseVolumeHandle.h.

{ return refPlane; }

References refPlane.

Referenced by magneticfield::MagGeoBuilder::buildInterpolator(), and MagGeoBuilderFromDDD::buildInterpolator().

references()

int magneticfield::BaseVolumeHandle::references ( int  which_side ) const

inline

Definition at line 57 of file BaseVolumeHandle.h.

                                         {  // FIXME!
      /*     return surfaces[which_side]->references(); */
      return 0;
    }

RN()

const double magneticfield::BaseVolumeHandle::RN ( ) const

inline

Distance of (x,y) plane from origin.

Definition at line 41 of file BaseVolumeHandle.h.

{ return theRN; }

References theRN.

sameSurface()

bool BaseVolumeHandle::sameSurface	(	const Surface &	s1,
		Sides	which_side,
		float	tolerance = 0.01
	)

Find out if two surfaces are the same physical surface.

Definition at line 101 of file BaseVolumeHandle.cc.

                                                                                       {
  //Check for null comparison
  if (&s1 == (surfaces[which_side]).get()) {
    if (debug)
      cout << "      sameSurface: OK (same ptr)" << endl;
    return true;
  }
 
  const float maxtilt = 0.999;
 
  const Surface &s2 = *(surfaces[which_side]);
  // Try with a plane.
  const Plane *p1 = dynamic_cast<const Plane *>(&s1);
  if (p1 != nullptr) {
    const Plane *p2 = dynamic_cast<const Plane *>(&s2);
    if (p2 == nullptr) {
      if (debug)
        cout << "      sameSurface: different types" << endl;
      return false;
    }
 
    if ((fabs(p1->normalVector().dot(p2->normalVector())) > maxtilt) &&
        (fabs((p1->toLocal(p2->position())).z()) < tolerance)) {
      if (debug)
        cout << "      sameSurface: OK " << fabs(p1->normalVector().dot(p2->normalVector())) << " "
             << fabs((p1->toLocal(p2->position())).z()) << endl;
      return true;
    } else {
      if (debug)
        cout << "      sameSurface: not the same: " << p1->normalVector() << p1->position() << endl
             << "                                 " << p2->normalVector() << p2->position() << endl
             << fabs(p1->normalVector().dot(p2->normalVector())) << " " << (p1->toLocal(p2->position())).z() << endl;
      return false;
    }
  }
 
  // Try with a cylinder.
  const Cylinder *cy1 = dynamic_cast<const Cylinder *>(&s1);
  if (cy1 != nullptr) {
    const Cylinder *cy2 = dynamic_cast<const Cylinder *>(&s2);
    if (cy2 == nullptr) {
      if (debug)
        cout << "      sameSurface: different types" << endl;
      return false;
    }
    // Assume axis is the same!
    if (fabs(cy1->radius() - cy2->radius()) < tolerance) {
      return true;
    } else {
      return false;
    }
  }
 
  // Try with a cone.
  const Cone *co1 = dynamic_cast<const Cone *>(&s1);
  if (co1 != nullptr) {
    const Cone *co2 = dynamic_cast<const Cone *>(&s2);
    if (co2 == nullptr) {
      if (debug)
        cout << "      sameSurface: different types" << endl;
      return false;
    }
    // FIXME
    if (fabs(co1->openingAngle() - co2->openingAngle()) < maxtilt &&
        (co1->vertex() - co2->vertex()).mag() < tolerance) {
      return true;
    } else {
      return false;
    }
  }
 
  if (debug)
    cout << "      sameSurface: unknown surfaces..." << endl;
  return false;
}

References gather_cfg::cout, debug, get, mag(), Cone::openingAngle(), p1, p2, Cylinder::radius(), surfaces, tolerance, and Cone::vertex().

Referenced by setSurface().

setSurface()

bool BaseVolumeHandle::setSurface	(	const Surface &	s1,
		Sides	which_side
	)

Assign a shared surface perorming sanity checks.

Definition at line 177 of file BaseVolumeHandle.cc.

                                                                     {
  //Check for null assignment
  if (&s1 == (surfaces[which_side]).get()) {
    isAssigned[which_side] = true;
    return true;
  }
 
  if (!sameSurface(s1, which_side)) {
    cout << "***ERROR: setSurface: trying to assign a surface that does not match destination surface. Skipping."
         << endl;
    const Surface &s2 = *(surfaces[which_side]);
    //FIXME: Just planes for the time being!!!
    const Plane *p1 = dynamic_cast<const Plane *>(&s1);
    const Plane *p2 = dynamic_cast<const Plane *>(&s2);
    if (p1 != nullptr && p2 != nullptr)
      cout << p1->normalVector() << p1->position() << endl << p2->normalVector() << p2->position() << endl;
    return false;
  }
 
  if (isAssigned[which_side]) {
    if (&s1 != (surfaces[which_side]).get()) {
      cout << "*** WARNING BaseVolumeHandle::setSurface: trying to reassign a surface to a different surface instance"
           << endl;
      return false;
    }
  } else {
    surfaces[which_side] = &s1;
    isAssigned[which_side] = true;
    if (debug)
      cout << "     Volume " << name << " # " << copyno << " Assigned: " << (int)which_side << endl;
    return true;
  }
 
  return false;  // let the compiler be happy
}

References copyno, gather_cfg::cout, debug, get, createfilelist::int, isAssigned, name, p1, p2, sameSurface(), and surfaces.

shape()

virtual DDSolidShape magneticfield::BaseVolumeHandle::shape ( ) const

pure virtual

Shape of the solid.

Implemented in magneticfield::volumeHandle, and MagGeoBuilderFromDDD::volumeHandle.

sides()

virtual std::vector<VolumeSide> magneticfield::BaseVolumeHandle::sides ( ) const

pure virtual

The surfaces and they orientation, as required to build a MagVolume.

Implemented in magneticfield::volumeHandle, and MagGeoBuilderFromDDD::volumeHandle.

surface() [1/2]

const Surface & BaseVolumeHandle::surface

(

int

which_side

)

const

Get the current surface on specified side.

Definition at line 215 of file BaseVolumeHandle.cc.

                                                             {
  assert(which_side >= 0 && which_side < 6);
  return *(surfaces[which_side]);
}

References cms::cuda::assert(), and surfaces.

Referenced by maxPhi(), maxZ(), and minZ().

surface() [2/2]

const Surface & BaseVolumeHandle::surface

(

Sides

which_side

)

const

Definition at line 213 of file BaseVolumeHandle.cc.

{ return *(surfaces[which_side]); }

References surfaces.

toExpand()

bool magneticfield::BaseVolumeHandle::toExpand ( ) const

inline

Definition at line 105 of file BaseVolumeHandle.h.

{ return expand; }

References expand.

Referenced by magneticfield::MagGeoBuilder::buildInterpolator(), and MagGeoBuilderFromDDD::buildInterpolator().

Member Data Documentation

center_

GlobalPoint magneticfield::BaseVolumeHandle::center_

protected

Definition at line 142 of file BaseVolumeHandle.h.

Referenced by buildPhiZSurf(), center(), magneticfield::volumeHandle::referencePlane(), magneticfield::volumeHandle::sides(), magneticfield::volumeHandle::volumeHandle(), and MagGeoBuilderFromDDD::volumeHandle::volumeHandle().

copyno

unsigned short magneticfield::BaseVolumeHandle::copyno

copy number

Definition at line 72 of file BaseVolumeHandle.h.

Referenced by magneticfield::MagGeoBuilder::buildInterpolator(), MagGeoBuilderFromDDD::buildInterpolator(), setSurface(), magneticfield::volumeHandle::volumeHandle(), and MagGeoBuilderFromDDD::volumeHandle::volumeHandle().

debug

const bool magneticfield::BaseVolumeHandle::debug

protected

Definition at line 151 of file BaseVolumeHandle.h.

Referenced by buildPhiZSurf(), runTauIdMVA.TauIDEmbedder::loadMVA_WPs_run2_2017(), magneticfield::volumeHandle::referencePlane(), runTauIdMVA.TauIDEmbedder::runTauID(), sameSurface(), setSurface(), magneticfield::volumeHandle::volumeHandle(), and MagGeoBuilderFromDDD::volumeHandle::volumeHandle().

expand

bool magneticfield::BaseVolumeHandle::expand

protected

Definition at line 146 of file BaseVolumeHandle.h.

Referenced by magneticfield::volumeHandle::sides(), and toExpand().

isAssigned

bool magneticfield::BaseVolumeHandle::isAssigned[6]

protected

Definition at line 122 of file BaseVolumeHandle.h.

Referenced by isPlaneMatched(), setSurface(), magneticfield::volumeHandle::volumeHandle(), and MagGeoBuilderFromDDD::volumeHandle::volumeHandle().

isIronFlag

bool magneticfield::BaseVolumeHandle::isIronFlag

protected

Definition at line 149 of file BaseVolumeHandle.h.

Referenced by isIron(), MagGeoBuilderFromDDD::volumeHandle::volumeHandle(), and magneticfield::volumeHandle::volumeHandle().

magFile

std::string magneticfield::BaseVolumeHandle::magFile

Name of magnetic field table file.

Definition at line 66 of file BaseVolumeHandle.h.

Referenced by magneticfield::MagGeoBuilder::buildInterpolator(), MagGeoBuilderFromDDD::buildInterpolator(), MagGeoBuilderFromDDD::volumeHandle::volumeHandle(), and magneticfield::volumeHandle::volumeHandle().

magVolume

MagVolume6Faces* magneticfield::BaseVolumeHandle::magVolume

Pointer to the final MagVolume (must be set from outside)

Definition at line 103 of file BaseVolumeHandle.h.

masterSector

int magneticfield::BaseVolumeHandle::masterSector

The sector for which an interpolator for this class of volumes should be built.

Definition at line 111 of file BaseVolumeHandle.h.

Referenced by magneticfield::MagGeoBuilder::buildInterpolator(), MagGeoBuilderFromDDD::buildInterpolator(), MagGeoBuilderFromDDD::volumeHandle::volumeHandle(), and magneticfield::volumeHandle::volumeHandle().

name

std::string magneticfield::BaseVolumeHandle::name

Name of the volume.

Definition at line 63 of file BaseVolumeHandle.h.

Referenced by ElectronMVAID.ElectronMVAID::__call__(), FWLite.ElectronMVAID::__call__(), dirstructure.Directory::__create_pie_image(), DisplayManager.DisplayManager::__del__(), dqm_interfaces.DirID::__eq__(), dirstructure.Directory::__get_full_path(), dirstructure.Comparison::__get_img_name(), dataset.Dataset::__getDataType(), dataset.Dataset::__getFileInfoList(), dirstructure.Comparison::__make_image(), core.autovars.NTupleVariable::__repr__(), core.autovars.NTupleObjectType::__repr__(), core.autovars.NTupleObject::__repr__(), core.autovars.NTupleCollection::__repr__(), dirstructure.Directory::__repr__(), dqm_interfaces.DirID::__repr__(), dirstructure.Comparison::__repr__(), config.Service::__setattr__(), config.CFG::__str__(), counter.Counter::__str__(), average.Average::__str__(), FWLite.WorkingPoints::_reformat_cut_definitions(), core.autovars.NTupleObjectType::addSubObjects(), core.autovars.NTupleObjectType::addVariables(), core.autovars.NTupleObjectType::allVars(), dataset.CMSDataset::buildListOfFiles(), dataset.LocalDataset::buildListOfFiles(), dataset.CMSDataset::buildListOfFilesDBS(), dirstructure.Directory::calcStats(), validation.Sample::digest(), python.rootplot.utilities.Hist::divide(), python.rootplot.utilities.Hist::divide_wilson(), DisplayManager.DisplayManager::Draw(), core.autovars.NTupleVariable::fillBranch(), core.autovars.NTupleObject::fillBranches(), core.autovars.NTupleCollection::fillBranchesScalar(), core.autovars.NTupleCollection::fillBranchesVector(), core.autovars.NTupleCollection::get_cpp_declaration(), core.autovars.NTupleCollection::get_cpp_wrapper_class(), core.autovars.NTupleCollection::get_py_wrapper_class(), utils.StatisticalTest::get_status(), production_tasks.Task::getname(), dataset.CMSDataset::getPrimaryDatasetEntries(), dataset.PrivateDataset::getPrimaryDatasetEntries(), VIDSelectorBase.VIDSelectorBase::initialize(), core.autovars.NTupleVariable::makeBranch(), core.autovars.NTupleObject::makeBranches(), core.autovars.NTupleCollection::makeBranchesScalar(), core.autovars.NTupleCollection::makeBranchesVector(), dirstructure.Directory::print_report(), dataset.BaseDataset::printInfo(), dataset.Dataset::printInfo(), production_tasks.MonitorJobs::run(), setSurface(), python.rootplot.utilities.Hist::TGraph(), python.rootplot.utilities.Hist::TH1F(), magneticfield::volumeHandle::volumeHandle(), MagGeoBuilderFromDDD::volumeHandle::volumeHandle(), counter.Counter::write(), and average.Average::write().

refPlane

GloballyPositioned<float>* magneticfield::BaseVolumeHandle::refPlane

protected

Definition at line 139 of file BaseVolumeHandle.h.

Referenced by buildPhiZSurf(), placement(), magneticfield::volumeHandle::referencePlane(), and ~BaseVolumeHandle().

surfaces

RCPS magneticfield::BaseVolumeHandle::surfaces[6]

protected

Definition at line 120 of file BaseVolumeHandle.h.

Referenced by buildPhiZSurf(), sameSurface(), setSurface(), magneticfield::volumeHandle::sides(), surface(), magneticfield::volumeHandle::volumeHandle(), and MagGeoBuilderFromDDD::volumeHandle::volumeHandle().

thePhiMin

Geom::Phi<float> magneticfield::BaseVolumeHandle::thePhiMin

protected

Definition at line 134 of file BaseVolumeHandle.h.

Referenced by minPhi().

theRMax

double magneticfield::BaseVolumeHandle::theRMax

protected

Definition at line 133 of file BaseVolumeHandle.h.

Referenced by magneticfield::volumeHandle::volumeHandle(), and MagGeoBuilderFromDDD::volumeHandle::volumeHandle().

theRMin

double magneticfield::BaseVolumeHandle::theRMin

protected

Definition at line 132 of file BaseVolumeHandle.h.

Referenced by minR(), magneticfield::volumeHandle::sides(), MagGeoBuilderFromDDD::volumeHandle::volumeHandle(), and magneticfield::volumeHandle::volumeHandle().

theRN

double magneticfield::BaseVolumeHandle::theRN

protected

Definition at line 128 of file BaseVolumeHandle.h.

Referenced by buildPhiZSurf(), RN(), magneticfield::volumeHandle::volumeHandle(), and MagGeoBuilderFromDDD::volumeHandle::volumeHandle().

volumeno

unsigned short magneticfield::BaseVolumeHandle::volumeno

volume number

Definition at line 69 of file BaseVolumeHandle.h.

Referenced by magneticfield::MagGeoBuilder::buildInterpolator(), MagGeoBuilderFromDDD::buildInterpolator(), MagGeoBuilderFromDDD::volumeHandle::volumeHandle(), and magneticfield::volumeHandle::volumeHandle().