DDCutTubsFromPoints.cc

Go to the documentation of this file.

#include "DD4hep/DetFactoryHelper.h"
#include "DetectorDescription/DDCMS/interface/DDPlugins.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"
 
#include "DataFormats/Math/interface/CMSUnits.h"
 
using namespace cms_units::operators;  // _deg and convertRadToDeg
 
static long algorithm(dd4hep::Detector& /* description */, cms::DDParsingContext& ctxt, xml_h e) {
  cms::DDNamespace ns(ctxt, e, true);
  cms::DDAlgoArguments args(ctxt, e);
 
  dd4hep::Volume mother = ns.volume(args.parentName());
 
  struct Section {
    float phi;  // phi position of this edge
    float z_l;  // -Z end (cuttubs l plane)
    float z_t;  // +Z end (cuttubs t plane)
    // radius is implicitly r_min
  };
 
  std::vector<Section> sections;
 
  float r_min = args.value<float>("rMin");
  float r_max = args.value<float>("rMax");
  float z_pos = args.value<float>("zPos");
 
  std::string solidOutput = args.value<std::string>("SolidName");
  const std::string material = args.value<std::string>("Material");
 
  auto phis = ns.vecFloat(args.str("Phi"));
  auto z_ls = ns.vecFloat(args.str("z_l"));
  auto z_ts = ns.vecFloat(args.str("z_t"));
 
  assert(phis.size() == z_ls.size());
  assert(phis.size() == z_ts.size());
 
  for (unsigned i = 0; i < phis.size(); i++) {
    Section s = {phis[i], z_ls[i], z_ts[i]};
 
    edm::LogVerbatim("TrackerGeom") << "DDCutTubsFromPoints: Sections :" << phis[i] << " , " << z_ls[i] << " , "
                                    << z_ts[i];
    sections.emplace_back(s);
  }
 
  assert(!sections.empty());
 
  // a segment is produced between each two consecutive sections that have a
  // non-zero phi distance. Sections with zero phi distance can be used to
  // create sharp jumps.
 
  solidOutput = ns.prepend(solidOutput);
  edm::LogVerbatim("TrackerGeom") << "DDCutTubsFromPoints debug: Parent " << args.parentName() << "\tSolid "
                                  << solidOutput << " NameSpace " << ns.name() << "\tnumber of sections "
                                  << sections.size();
 
  // radius for plane calculations
  // We use r_max here, since P3 later has a Z that is always more inside
  // than the extreme points. This means the cutting planes have outwards
  // slopes in r-Z, and the corner at r_max could stick out of the bounding
  // volume otherwise.
  float r = r_max;
 
  // min and max z for the placement in the end
  float min_z = 1e9;
  float max_z = -1e9;
 
  // counter of actually produced segments (excluding skipped ones)
  int segment = 0;
 
  // the segments and their corresponding offset (absolute, as in the input)
  std::vector<dd4hep::Solid> segments;
  std::vector<float> offsets;
 
  Section s1 = sections[0];
 
  for (Section s2 : sections) {
    if (s1.phi != s2.phi) {
      segment++;
      // produce segment s1-s2.
      float phi1 = s1.phi;
      float phi2 = s2.phi;
 
      // track the min/max to properly place&align later
      if (s2.z_l < min_z)
        min_z = s2.z_l;
      if (s2.z_t > max_z)
        max_z = s2.z_t;
 
      float P1_z_l = s1.z_l;
      float P1_z_t = s1.z_t;
      float P2_z_l = s2.z_l;
      float P2_z_t = s2.z_t;
 
      float P1_x_t = cos(phi1) * r;
      float P1_x_l = cos(phi1) * r;
      float P1_y_t = sin(phi1) * r;
      float P1_y_l = sin(phi1) * r;
 
      float P2_x_t = cos(phi2) * r;
      float P2_x_l = cos(phi2) * r;
      float P2_y_t = sin(phi2) * r;
      float P2_y_l = sin(phi2) * r;
 
      // each cutting plane is defined by P1-3. P1-2 are corners of the
      // segment, P3 is at r=0 with the "average" z to get a nice cut.
      float P3_z_l = (P1_z_l + P2_z_l) / 2;
      float P3_z_t = (P1_z_t + P2_z_t) / 2;
 
      std::string segname(solidOutput + "_seg_" + std::to_string(segment));
      edm::LogVerbatim("TrackerGeom").log([&](auto& log) {
        log << "DDCutTubsFromPoints: P1 l: " << segname << P1_x_l << " , " << P1_y_l << " , " << P1_z_l;
        log << "DDCutTubsFromPoints: P1 t: " << segname << P1_x_t << " , " << P1_y_t << " , " << P1_z_t;
        log << "DDCutTubsFromPoints: P2 l: " << segname << P2_x_l << " , " << P2_y_l << " , " << P2_z_l;
        log << "DDCutTubsFromPoints: P2 t: " << segname << P2_x_t << " , " << P2_y_t << " , " << P2_z_t;
      });
 
      // we only have one dz to position both planes. The anchor is implicitly
      // between the P3's, we have to use an offset later to make the segments
      // line up correctly.
      float dz = 0.5 * (P3_z_t - P3_z_l);
      float offset = 0.5 * (P3_z_t + P3_z_l);
 
      // the plane is defined by P1-P3 and P2-P3; since P3 is at r=0 we
      // only need the z.
      float D1_z_l = P1_z_l - P3_z_l;
      float D2_z_l = P2_z_l - P3_z_l;
 
      // the normal is then the cross product...
      float n_x_l = (P1_y_l * D2_z_l) - (D1_z_l * P2_y_l);
      float n_y_l = (D1_z_l * P2_x_l) - (P1_x_l * D2_z_l);
      float n_z_l = (P1_x_l * P2_y_l) - (P1_y_l * P2_x_l);
 
      edm::LogVerbatim("TrackerGeom") << "DDCutTubsFromPoints: l_Pos (" << n_x_l << "," << n_y_l << "," << n_z_l << ")";
 
      // ... normalized.
      // flip the sign here (but not for t) since root wants it like that.
      float norm = -sqrt(n_x_l * n_x_l + n_y_l * n_y_l + n_z_l * n_z_l);
      n_x_l /= norm;
      n_y_l /= norm;
      n_z_l /= norm;
 
      edm::LogVerbatim("TrackerGeom") << "DDCutTubsFromPoints: l_norm " << norm;
 
      // same game for the t side.
      float D1_z_t = P1_z_t - P3_z_t;
      float D2_z_t = P2_z_t - P3_z_t;
 
      float n_x_t = (P1_y_t * D2_z_t) - (D1_z_t * P2_y_t);
      float n_y_t = (D1_z_t * P2_x_t) - (P1_x_t * D2_z_t);
      float n_z_t = (P1_x_t * P2_y_t) - (P1_y_t * P2_x_t);
 
      edm::LogVerbatim("TrackerGeom") << "DDCutTubsFromPoints: t_Pos (" << n_x_t << "," << n_y_t << "," << n_z_t << ")";
 
      norm = sqrt(n_x_t * n_x_t + n_y_t * n_y_t + n_z_t * n_z_t);
 
      edm::LogVerbatim("TrackerGeom") << "DDCutTubsFromPoints: t_norm " << norm;
 
      n_x_t /= norm;
      n_y_t /= norm;
      n_z_t /= norm;
 
      auto seg = dd4hep::CutTube(segname, r_min, r_max, dz, phi1, phi2, n_x_l, n_y_l, n_z_l, n_x_t, n_y_t, n_z_t);
 
      edm::LogVerbatim("TrackerGeom") << "DDCutTubsFromPoints: CutTube(" << r_min << "," << r_max << "," << dz << ","
                                      << phi1 << "," << phi2 << "," << n_x_l << "," << n_y_l << "," << n_z_l << ","
                                      << n_x_t << "," << n_y_t << "," << n_z_t << ")";
 
      segments.emplace_back(seg);
      offsets.emplace_back(offset);
    }
 
    s1 = s2;
  }
 
  assert(segments.size() >= 2);  // less would be special cases
 
  dd4hep::Solid solid = segments[0];
 
  // placement happens relative to the first member of the union
  float shift = offsets[0];
 
  for (unsigned i = 1; i < segments.size() - 1; i++) {
    solid = dd4hep::UnionSolid(solidOutput + "_uni_" + std::to_string(i + 1),
                               solid,
                               segments[i],
                               dd4hep::Position(0., 0., offsets[i] - shift));
  }
 
  solid = dd4hep::UnionSolid(solidOutput,
                             solid,
                             segments[segments.size() - 1],
                             dd4hep::Position(0., 0., offsets[segments.size() - 1] - shift));
 
  edm::LogVerbatim("TrackerGeom") << "DDCutTubsFromPoints: " << solid.name() << " Union solid with " << segments.size()
                                  << " segments";
 
  // remove the common offset from the input, to get sth. aligned at z=0.
  float offset = -shift + (min_z + 0.5 * (max_z - min_z));
 
  auto logical = dd4hep::Volume(solidOutput, solid, ns.material(material));
 
  int nCopy = 1;
  auto pos = dd4hep::Position(0., 0., z_pos - offset);
  mother.placeVolume(logical, nCopy, dd4hep::Transform3D(dd4hep::Rotation3D(), pos));
 
  mother.placeVolume(logical, nCopy + 1, dd4hep::Transform3D(ns.rotation("pixfwdCommon:Z180"), pos));
 
  return cms::s_executed;
}
 
// first argument is the type from the xml file
DECLARE_DDCMS_DETELEMENT(DDCMS_track_DDCutTubsFromPoints, algorithm)