Inheritance diagram for DDHCalBarrelAlgo:

Public Member Functions
	DDHCalBarrelAlgo ()

void	execute (DDCompactView &cpv) override

double	getAbsorbD (unsigned int i) const

int	getAbsorberN () const

const std::string &	getAbsorbMat (unsigned int i) const

const std::string &	getAbsorbName (unsigned int i) const

double	getAbsorbT (unsigned int i) const

double	getDetdP1 (unsigned int i) const

double	getDetdP2 (unsigned int i) const

const std::string &	getDetMat () const

const std::string &	getDetMatPl () const

const std::string &	getDetMatSc () const

int	getDetPosY (unsigned int i) const

double	getDetT11 (unsigned int i) const

double	getDetT12 (unsigned int i) const

double	getDetT21 (unsigned int i) const

double	getDetT22 (unsigned int i) const

double	getDetTsc (unsigned int i) const

int	getDetType (unsigned int i) const

double	getDetWidth1 (unsigned int i) const

double	getDetWidth2 (unsigned int i) const

const std::string &	getGenMaterial () const

int	getLayerAbsorb (unsigned int i) const

double	getLayerAlpha (unsigned i) const

double	getLayerD1 (unsigned i) const

double	getLayerD2 (unsigned i) const

double	getLayerGap (unsigned int i) const

int	getLayerId (unsigned i) const

const std::string &	getLayerLabel (unsigned i) const

const std::string &	getLayerMaterial (unsigned i) const

double	getLayerT1 (unsigned i) const

double	getLayerT2 (unsigned i) const

double	getLayerWidth (unsigned i) const

const std::string &	getMidAbsMat (unsigned int i) const

const std::string &	getMidAbsName (unsigned int i) const

int	getMidAbsorber () const

double	getMidAbsT (unsigned int i) const

double	getMidAbsW (unsigned int i) const

double	getMiddleD () const

const std::string &	getMiddleMat () const

double	getMiddleW () const

int	getNhalf () const

int	getNLayers () const

int	getNsectors () const

int	getNsectortot () const

double	getRin () const

double	getRmax (unsigned int i) const

double	getRout () const

int	getRzones () const

const std::string &	getSideAbsMat (unsigned int i) const

const std::string &	getSideAbsName (unsigned int i) const

int	getSideAbsorber () const

double	getSideAbsW (unsigned int i) const

double	getSideD (unsigned int i) const

const std::string &	getSideMat (unsigned int i) const

double	getSideT (unsigned int i) const

double	getTanTheta (unsigned int i) const

double	getTheta (unsigned int i) const

double	getZoff (unsigned int i) const

void	initialize (const DDNumericArguments &nArgs, const DDVectorArguments &vArgs, const DDMapArguments &mArgs, const DDStringArguments &sArgs, const DDStringVectorArguments &vsArgs) override

	~DDHCalBarrelAlgo () override

Private Member Functions
void	constructGeneralVolume (DDCompactView &cpv)

void	constructInsideDetectors (const DDLogicalPart &detector, const std::string &name, int id, double dx, double dy, double dz, int type, DDCompactView &cpv)

void	constructInsideLayers (const DDLogicalPart &laylog, const std::string &name, int id, int nAbs, double rin, double d1, double alpha1, double d2, double alpha2, double t1, double t2, DDCompactView &cpv)

void	constructInsideSector (const DDLogicalPart &sector, DDCompactView &cpv)

DDLogicalPart	constructMidLayer (const DDLogicalPart &laylog, const std::string &nm, double rin, double alpha, DDCompactView &cpv)

DDLogicalPart	constructSideLayer (const DDLogicalPart &laylog, const std::string &nm, int nAbs, double rin, double alpha, DDCompactView &cpv)

Private Attributes
std::vector< double >	absorbD

std::vector< std::string >	absorbMat

std::vector< std::string >	absorbName

std::vector< double >	absorbT

std::vector< double >	detdP1

std::vector< double >	detdP2

std::string	detMat

std::string	detMatPl

std::string	detMatSc

std::vector< int >	detPosY

std::string	detRot

std::vector< double >	detT11

std::vector< double >	detT12

std::vector< double >	detT21

std::vector< double >	detT22

std::vector< double >	detTsc

std::vector< int >	detType

std::vector< double >	detWidth1

std::vector< double >	detWidth2

std::string	genMaterial

std::string	idName

std::string	idNameSpace

int	idOffset

std::vector< int >	layerAbsorb

std::vector< double >	layerAlpha

std::vector< double >	layerD1

std::vector< double >	layerD2

std::vector< double >	layerGap

std::vector< int >	layerId

std::vector< std::string >	layerLabel

std::vector< std::string >	layerMat

std::vector< double >	layerT1

std::vector< double >	layerT2

std::vector< double >	layerWidth

double	middleD

std::string	middleMat

double	middleW

std::vector< std::string >	midMat

std::vector< std::string >	midName

std::vector< double >	midT

std::vector< double >	midW

int	nAbsorber

int	nhalf

int	nLayers

int	nMidAbs

int	nsectors

int	nsectortot

int	nSideAbs

double	rin

std::vector< double >	rmax

std::string	rotHalf

std::string	rotns

double	rout

int	rzones

std::vector< std::string >	sideAbsMat

std::vector< std::string >	sideAbsName

std::vector< double >	sideAbsW

std::vector< double >	sideD

std::vector< std::string >	sideMat

std::vector< double >	sideT

std::vector< double >	theta

std::vector< double >	ttheta

std::vector< double >	zoff

Detailed Description

Definition at line 29 of file DDHCalBarrelAlgo.cc.

Constructor & Destructor Documentation

◆ DDHCalBarrelAlgo()

DDHCalBarrelAlgo::DDHCalBarrelAlgo ( )

Definition at line 252 of file DDHCalBarrelAlgo.cc.

     : theta(0),
       rmax(0),
       zoff(0),
       ttheta(0),
       layerId(0),
       layerLabel(0),
       layerMat(0),
       layerWidth(0),
       layerD1(0),
       layerD2(0),
       layerAlpha(0),
       layerT1(0),
       layerT2(0),
       layerAbsorb(0),
       layerGap(0),
       absorbName(0),
       absorbMat(0),
       absorbD(0),
       absorbT(0),
       midName(0),
       midMat(0),
       midW(0),
       midT(0),
       sideMat(0),
       sideD(0),
       sideT(0),
       sideAbsName(0),
       sideAbsMat(0),
       sideAbsW(0),
       detType(0),
       detdP1(0),
       detdP2(0),
       detT11(0),
       detT12(0),
       detTsc(0),
       detT21(0),
       detT22(0),
       detWidth1(0),
       detWidth2(0),
       detPosY(0) {
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: Creating an instance";
 #endif
 }

◆ ~DDHCalBarrelAlgo()

DDHCalBarrelAlgo::~DDHCalBarrelAlgo ( )

override

Definition at line 298 of file DDHCalBarrelAlgo.cc.

298 {}

Member Function Documentation

◆ constructGeneralVolume()

void DDHCalBarrelAlgo::constructGeneralVolume ( DDCompactView & cpv )

private

Definition at line 460 of file DDHCalBarrelAlgo.cc.

                                                                 {
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: General volume...";
 #endif
  
   DDRotation rot = DDRotation();
  
   double alpha = (1._pi) / getNsectors();
   double dphi = getNsectortot() * (2._pi) / getNsectors();
   int nsec, ntot = 15;
   if (getNhalf() == 1)
     nsec = 8;
   else
     nsec = 15;
   int nf = ntot - nsec;
  
   //Calculate zmin... see HCalBarrel.hh picture. For polyhedra
   //Rmin and Rmax are distances to vertex
   double zmax = getZoff(3);
   double zstep5 = getZoff(4);
   double zstep4 = (getZoff(1) + getRmax(1) * getTanTheta(1));
   if ((getZoff(2) + getRmax(1) * getTanTheta(2)) > zstep4)
     zstep4 = (getZoff(2) + getRmax(1) * getTanTheta(2));
   double zstep3 = (getZoff(1) + getRmax(0) * getTanTheta(1));
   double zstep2 = (getZoff(0) + getRmax(0) * getTanTheta(0));
   double zstep1 = (getZoff(0) + getRin() * getTanTheta(0));
   double rout = getRout();
   double rout1 = getRmax(3);
   double rin = getRin();
   double rmid1 = getRmax(0);
   double rmid2 = getRmax(1);
   double rmid3 = (getZoff(4) - getZoff(2)) / getTanTheta(2);
   double rmid4 = getRmax(2);
  
   std::vector<double> pgonZ = {-zmax,
                                -zstep5,
                                -zstep5,
                                -zstep4,
                                -zstep3,
                                -zstep2,
                                -zstep1,
                                0,
                                zstep1,
                                zstep2,
                                zstep3,
                                zstep4,
                                zstep5,
                                zstep5,
                                zmax};
  
   std::vector<double> pgonRmin = {
       rmid4, rmid3, rmid3, rmid2, rmid1, rmid1, rin, rin, rin, rmid1, rmid1, rmid2, rmid3, rmid3, rmid4};
  
   std::vector<double> pgonRmax = {
       rout1, rout1, rout, rout, rout, rout, rout, rout, rout, rout, rout, rout, rout, rout1, rout1};
  
   std::vector<double> pgonZHalf = {0, zstep1, zstep2, zstep3, zstep4, zstep5, zstep5, zmax};
  
   std::vector<double> pgonRminHalf = {rin, rin, rmid1, rmid1, rmid2, rmid3, rmid3, rmid4};
  
   std::vector<double> pgonRmaxHalf = {rout, rout, rout, rout, rout, rout, rout1, rout1};
  
   std::string name("Null");
   DDSolid solid;
   if (nf == 0) {
     solid = DDSolidFactory::polyhedra(
         DDName(idName, idNameSpace), getNsectortot(), -alpha, dphi, pgonZ, pgonRmin, pgonRmax);
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << DDName(idName, idNameSpace) << " Polyhedra made of "
                                  << getGenMaterial() << " with " << getNsectortot() << " sectors from "
                                  << convertRadToDeg(-alpha) << " to " << convertRadToDeg(-alpha + dphi) << " and with "
                                  << nsec << " sections ";
     for (unsigned int i = 0; i < pgonZ.size(); i++)
       edm::LogVerbatim("HCalGeom") << "\t"
                                    << "\tZ = " << pgonZ[i] << "\tRmin = " << pgonRmin[i] << "\tRmax = " << pgonRmax[i];
 #endif
   } else {
     solid = DDSolidFactory::polyhedra(
         DDName(idName, idNameSpace), getNsectortot(), -alpha, dphi, pgonZHalf, pgonRminHalf, pgonRmaxHalf);
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << DDName(idName, idNameSpace) << " Polyhedra made of "
                                  << getGenMaterial() << " with " << getNsectortot() << " sectors from "
                                  << convertRadToDeg(-alpha) << " to " << convertRadToDeg(-alpha + dphi) << " and with "
                                  << nsec << " sections ";
     for (unsigned int i = 0; i < pgonZHalf.size(); i++)
       edm::LogVerbatim("HCalGeom") << "\t"
                                    << "\tZ = " << pgonZHalf[i] << "\tRmin = " << pgonRminHalf[i]
                                    << "\tRmax = " << pgonRmaxHalf[i];
 #endif
   }
  
   DDName matname(DDSplit(getGenMaterial()).first, DDSplit(getGenMaterial()).second);
   DDMaterial matter(matname);
   DDLogicalPart genlogic(DDName(idName, idNameSpace), matter, solid);
  
   DDName parentName = parent().name();
   DDTranslation r0(0, 0, 0);
   cpv.position(DDName(idName, idNameSpace), parentName, 1, r0, rot);
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << DDName(idName, idNameSpace) << " number 1 positioned in "
                                << parentName << " at (0, 0, 0) with no rotation";
 #endif
   //Forward and backwards halfs
   name = idName + "Half";
   nf = (ntot + 1) / 2;
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << DDName(name, idNameSpace) << " Polyhedra made of "
                                << getGenMaterial() << " with " << getNsectortot() << " sectors from "
                                << convertRadToDeg(-alpha) << " to " << convertRadToDeg(-alpha + dphi) << " and with "
                                << nf << " sections ";
   for (unsigned int i = 0; i < pgonZHalf.size(); i++)
     edm::LogVerbatim("HCalGeom") << "\t"
                                  << "\tZ = " << pgonZHalf[i] << "\tRmin = " << pgonRminHalf[i]
                                  << "\tRmax = " << pgonRmaxHalf[i];
 #endif
  
   solid = DDSolidFactory::polyhedra(
       DDName(name, idNameSpace), getNsectortot(), -alpha, dphi, pgonZHalf, pgonRminHalf, pgonRmaxHalf);
   DDLogicalPart genlogich(DDName(name, idNameSpace), matter, solid);
  
   cpv.position(genlogich, genlogic, 1, r0, rot);
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << genlogich.name() << " number 1 positioned in "
                                << genlogic.name() << " at (0, 0, 0) with no rotation";
 #endif
   if (getNhalf() != 1) {
     rot = DDRotation(DDName(rotHalf, rotns));
     cpv.position(genlogich, genlogic, 2, r0, rot);
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << genlogich.name() << " number 2 positioned in "
                                  << genlogic.name() << " at " << r0 << " with " << rot;
 #endif
   }  //end if (getNhalf...
  
   //Construct sector (from -alpha to +alpha)
   name = idName + "Module";
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << DDName(name, idNameSpace) << " Polyhedra made of "
                                << getGenMaterial() << " with 1 sector from " << convertRadToDeg(-alpha) << " to "
                                << convertRadToDeg(alpha) << " and with " << nf << " sections";
   for (unsigned int i = 0; i < pgonZHalf.size(); i++)
     edm::LogVerbatim("HCalGeom") << "\t"
                                  << "\tZ = " << pgonZHalf[i] << "\tRmin = " << pgonRminHalf[i]
                                  << "\tRmax = " << pgonRmaxHalf[i];
 #endif
  
   solid =
       DDSolidFactory::polyhedra(DDName(name, idNameSpace), 1, -alpha, 2 * alpha, pgonZHalf, pgonRminHalf, pgonRmaxHalf);
   DDLogicalPart seclogic(DDName(name, idNameSpace), matter, solid);
  
   double theta = 90._deg;
   for (int ii = 0; ii < getNsectortot(); ii++) {
     double phi = ii * 2 * alpha;
     double phiy = phi + 90._deg;
  
     DDRotation rotation;
     std::string rotstr("NULL");
     if (phi != 0) {
       rotstr = "R" + formatAsDegreesInInteger(phi);
       rotation = DDRotation(DDName(rotstr, rotns));
       if (!rotation) {
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: Creating a new "
                                      << "rotation " << rotstr << "\t 90," << convertRadToDeg(phi) << ",90,"
                                      << (90 + convertRadToDeg(phi)) << ", 0, 0";
 #endif
         rotation = DDrot(DDName(rotstr, rotns), theta, phi, theta, phiy, 0, 0);
       }  //if !rotation
     }    //if phideg!=0
  
     cpv.position(seclogic, genlogich, ii + 1, r0, rotation);
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << seclogic.name() << " number " << ii + 1 << " positioned in "
                                  << genlogich.name() << " at " << r0 << " with " << rotation;
 #endif
   }
  
   //Construct the things inside the sector
   constructInsideSector(seclogic, cpv);
 }

References alpha, constructInsideSector(), angle_units::operators::convertRadToDeg(), DDrot(), DDSplit(), first, formatAsDegreesInInteger(), getGenMaterial(), getNhalf(), getNsectors(), getNsectortot(), getRin(), getRmax(), getRout(), getTanTheta(), getZoff(), mps_fire::i, idName, idNameSpace, cuy::ii, Skims_PA_cff::name, DDBase< N, C >::name(), gpuPixelDoublets::ntot, class-composition::parent, phi, DDSolidFactory::polyhedra(), DDCompactView::position(), rin, makeMuonMisalignmentScenario::rot, idealTransformation::rotation, rotHalf, rotns, rout, edm::second(), AlCaHLTBitMon_QueryRunRegistry::string, theta, and SiStripMonitorCluster_cfi::zmax.

Referenced by execute().

◆ constructInsideDetectors()

void DDHCalBarrelAlgo::constructInsideDetectors	(	const DDLogicalPart &	detector,
		const std::string &	name,
		int	id,
		double	dx,
		double	dy,
		double	dz,
		int	type,
		DDCompactView &	cpv
	)

private

Definition at line 1092 of file DDHCalBarrelAlgo.cc.

                                                                     {
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: \t\tInside detector " << id << "...";
 #endif
  
   DDName plmatname(DDSplit(getDetMatPl()).first, DDSplit(getDetMatPl()).second);
   DDMaterial plmatter(plmatname);
   DDName scmatname(DDSplit(getDetMatSc()).first, DDSplit(getDetMatSc()).second);
   DDMaterial scmatter(scmatname);
  
   std::string plname = detector.name().name() + "Plastic_";
   std::string scname = idName + "Scintillator" + name;
  
   id--;
   DDSolid solid;
   DDLogicalPart glog;
   double wid, y = 0;
   double dx1, dx2, shiftX;
  
   if (type == 1) {
     wid = 0.5 * getDetWidth1(id);
     if (getDetPosY(id) > 0)
       y = -dy + wid;
     dx1 = 0.5 * getDetT11(id);
     dx2 = 0.5 * getDetT21(id);
     shiftX = getDetdP1(id);
   } else {
     wid = 0.5 * getDetWidth2(id);
     dx1 = 0.5 * getDetT12(id);
     dx2 = 0.5 * getDetT22(id);
     shiftX = getDetdP2(id);
   }
  
   solid = DDSolidFactory::box(DDName(plname + "1", idNameSpace), dx1, wid, dz);
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << solid.name() << " Box made of " << getDetMatPl()
                                << " of dimensions " << dx1 << ", " << wid << ", " << dz;
 #endif
   glog = DDLogicalPart(solid.ddname(), plmatter, solid);
  
   double x = shiftX + dx1 - dx;
   cpv.position(glog, detector, 1, DDTranslation(x, y, 0), DDRotation());
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << glog.name() << " Number 1 positioned in " << detector.name()
                                << " at (" << x << "," << y << ",0) with no rotation";
 #endif
   solid = DDSolidFactory::box(DDName(scname, idNameSpace), 0.5 * getDetTsc(id), wid, dz);
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << solid.name() << " Box made of " << getDetMatSc()
                                << " of dimensions " << 0.5 * getDetTsc(id) << ", " << wid << ", " << dz;
 #endif
   glog = DDLogicalPart(solid.ddname(), scmatter, solid);
  
   x += dx1 + 0.5 * getDetTsc(id);
   int copyNo = id * 10 + getDetType(id);
   cpv.position(glog, detector, copyNo, DDTranslation(x, y, 0), DDRotation());
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << glog.name() << " Number " << copyNo << " positioned in "
                                << detector.name() << " at (" << x << "," << y << ",0) with no rotation";
 #endif
   solid = DDSolidFactory::box(DDName(plname + "2", idNameSpace), dx2, wid, dz);
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << solid.name() << " Box made of " << getDetMatPl()
                                << " of dimensions " << dx2 << ", " << wid << ", " << dz;
 #endif
   glog = DDLogicalPart(solid.ddname(), plmatter, solid);
  
   x += 0.5 * getDetTsc(id) + dx2;
   cpv.position(glog, detector, 1, DDTranslation(x, y, 0), DDRotation());
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << glog.name() << " Number 1 positioned in " << detector.name()
                                << " at (" << x << "," << y << ",0) with no rotation";
 #endif
 }

References DDSolidFactory::box(), DDBase< N, C >::ddname(), DDSplit(), hgcalTestNeighbor_cfi::detector, PVValHelper::dx, PVValHelper::dy, PVValHelper::dz, first, getDetdP1(), getDetdP2(), getDetMatPl(), getDetMatSc(), getDetPosY(), getDetT11(), getDetT12(), getDetT21(), getDetT22(), getDetTsc(), getDetType(), getDetWidth1(), getDetWidth2(), idName, idNameSpace, Skims_PA_cff::name, DDBase< N, C >::name(), DDCompactView::position(), edm::second(), AlCaHLTBitMon_QueryRunRegistry::string, x, and y.

Referenced by constructInsideLayers().

◆ constructInsideLayers()

void DDHCalBarrelAlgo::constructInsideLayers	(	const DDLogicalPart &	laylog,
		const std::string &	name,
		int	id,
		int	nAbs,
		double	rin,
		double	d1,
		double	alpha1,
		double	d2,
		double	alpha2,
		double	t1,
		double	t2,
		DDCompactView &	cpv
	)

private

Definition at line 763 of file DDHCalBarrelAlgo.cc.

                                                                  {
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: \t\tInside layer " << id << "...";
 #endif
   //Pointers to the Rotation Matrices and to the Materials
   DDRotation rot(DDName(detRot, rotns));
  
   std::string nam0 = nm + "In";
   std::string name = idName + nam0;
   DDName matName(DDSplit(getDetMat()).first, DDSplit(getDetMat()).second);
   DDMaterial matter(matName);
  
   DDSolid solid;
   DDLogicalPart glog, mother;
   double rsi, dx, dy, dz, x, y;
   int i, in;
   //Two lower volumes
   if (alpha1 > 0) {
     rsi = rin + d1;
     in = 0;
     for (i = 0; i < getRzones() - 1; i++) {
       if (rsi >= getRmax(i))
         in = i + 1;
     }
     dx = 0.5 * t1;
     dy = 0.5 * rsi * (tan(alpha1) - tan(alpha2));
     dz = 0.5 * (getZoff(in) + rsi * getTanTheta(in));
     x = rsi + dx;
     y = 0.5 * rsi * (tan(alpha1) + tan(alpha2));
     DDTranslation r11(x, y, dz);
     DDTranslation r12(x, -y, dz);
  
     solid = DDSolidFactory::box(DDName(name + "1", idNameSpace), dx, dy, dz);
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << solid.name() << " Box made of " << getDetMat()
                                  << " of dimensions " << dx << ", " << dy << ", " << dz;
 #endif
     glog = DDLogicalPart(solid.ddname(), matter, solid);
  
     if (nAbs != 0) {
       mother = constructSideLayer(laylog, name, nAbs, rin, alpha1, cpv);
     } else {
       mother = laylog;
     }
     cpv.position(glog, mother, idOffset + 1, r11, DDRotation());
     cpv.position(glog, mother, idOffset + 2, r12, rot);
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << glog.name() << " Number " << idOffset + 1
                                  << " positioned in " << mother.name() << " at " << r11 << " with no rotation\n"
                                  << "DDHCalBarrelAlgo: " << glog.name() << " Number " << idOffset + 2
                                  << " positioned in " << mother.name() << " at " << r12 << " with " << rot;
 #endif
     //Constructin the plastics and scintillators inside
     constructInsideDetectors(glog, nam0 + "1", id, dx, dy, dz, 1, cpv);
   }
  
   //Upper volume
   rsi = rin + d2;
   in = 0;
   for (i = 0; i < getRzones() - 1; i++) {
     if (rsi >= getRmax(i))
       in = i + 1;
   }
   dx = 0.5 * t2;
   dy = 0.5 * rsi * tan(alpha2);
   dz = 0.5 * (getZoff(in) + rsi * getTanTheta(in));
   x = rsi + dx;
   DDTranslation r21(x, dy, dz);
   DDTranslation r22(x, -dy, dz);
  
   solid = DDSolidFactory::box(DDName(name + "2", idNameSpace), dx, dy, dz);
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << solid.name() << " Box made of " << getDetMat()
                                << " of dimensions " << dx << ", " << dy << ", " << dz;
 #endif
   glog = DDLogicalPart(solid.ddname(), matter, solid);
  
   if (nAbs < 0) {
     mother = constructMidLayer(laylog, name, rin, alpha1, cpv);
   } else {
     mother = laylog;
   }
   cpv.position(glog, mother, idOffset + 3, r21, DDRotation());
   cpv.position(glog, mother, idOffset + 4, r22, rot);
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << glog.name() << " Number " << idOffset + 3 << " positioned in "
                                << mother.name() << " at " << r21
                                << " with no rotation\nDDHCalBarrelAlgo: " << glog.name() << " Number " << idOffset + 4
                                << " positioned in " << mother.name() << " at " << r22 << " with " << rot;
 #endif
   //Constructin the plastics and scintillators inside
   constructInsideDetectors(glog, nam0 + "2", id, dx, dy, dz, 2, cpv);
 }

References DDSolidFactory::box(), constructInsideDetectors(), constructMidLayer(), constructSideLayer(), d1, DDBase< N, C >::ddname(), DDSplit(), detRot, PVValHelper::dx, PVValHelper::dy, PVValHelper::dz, first, getDetMat(), getRmax(), getRzones(), getTanTheta(), getZoff(), mps_fire::i, idName, idNameSpace, idOffset, recoMuon::in, Skims_PA_cff::name, DDBase< N, C >::name(), DDCompactView::position(), rin, makeMuonMisalignmentScenario::rot, rotns, edm::second(), AlCaHLTBitMon_QueryRunRegistry::string, RandomServiceHelper::t1, RandomServiceHelper::t2, funct::tan(), x, and y.

Referenced by constructInsideSector().

◆ constructInsideSector()

void DDHCalBarrelAlgo::constructInsideSector	(	const DDLogicalPart &	sector,
		DDCompactView &	cpv
	)

private

!!!!!!!!!!!!!!!!Should be zero. And removed as soon as

Definition at line 641 of file DDHCalBarrelAlgo.cc.

                                                                                             {
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: Layers (" << getNLayers() << ") ...";
 #endif
   double alpha = (1._pi) / getNsectors();
   double rin = getRin();
   for (int i = 0; i < getNLayers(); i++) {
     std::string name = idName + getLayerLabel(i);
     DDName matname(DDSplit(getLayerMaterial(i)).first,
                    DDSplit(getLayerMaterial(i)).second);  //idNameSpace);
     DDMaterial matter(matname);
  
     double width = getLayerWidth(i);
     double rout = rin + width;
  
     int in = 0, out = 0;
     for (int j = 0; j < getRzones() - 1; j++) {
       if (rin >= getRmax(j))
         in = j + 1;
       if (rout > getRmax(j))
         out = j + 1;
     }
     double zout = getZoff(in) + rin * getTanTheta(in);
  
     //vertical walls are allowed in SolidPolyhedra
     double deltaz = 0;
     int nsec = 2;
     std::vector<double> pgonZ, pgonRmin, pgonRmax;
     // index 0
     pgonZ.emplace_back(0);
     pgonRmin.emplace_back(rin);
     pgonRmax.emplace_back(rout);
     // index 1
     pgonZ.emplace_back(zout);
     pgonRmin.emplace_back(rin);
     pgonRmax.emplace_back(rout);
     if (in == out) {
       if (in <= 3) {
         //index 2
         pgonZ.emplace_back(getZoff(in) + rout * getTanTheta(in));
         pgonRmin.emplace_back(pgonRmax[1]);
         pgonRmax.emplace_back(pgonRmax[1]);
         nsec++;
       }
     } else {
       if (in == 3) {
         //redo index 1, add index 2
         pgonZ[1] = (getZoff(out) + getRmax(out) * getTanTheta(out));
         pgonZ.emplace_back(pgonZ[1] + deltaz);
         pgonRmin.emplace_back(pgonRmin[1]);
         pgonRmax.emplace_back(getRmax(in));
         //index 3
         pgonZ.emplace_back(getZoff(in) + getRmax(in) * getTanTheta(in));
         pgonRmin.emplace_back(pgonRmin[2]);
         pgonRmax.emplace_back(pgonRmax[2]);
         nsec += 2;
       } else {
         //index 2
         pgonZ.emplace_back(getZoff(in) + getRmax(in) * getTanTheta(in));
         pgonRmin.emplace_back(getRmax(in));
         pgonRmax.emplace_back(pgonRmax[1]);
         nsec++;
         if (in == 0) {
           pgonZ.emplace_back(getZoff(out) + getRmax(in) * getTanTheta(out));
           pgonRmin.emplace_back(pgonRmin[2]);
           pgonRmax.emplace_back(pgonRmax[2]);
           nsec++;
         }
         if (in <= 1) {
           pgonZ.emplace_back(getZoff(out) + rout * getTanTheta(out));
           pgonRmin.emplace_back(rout);
           pgonRmax.emplace_back(rout);
           nsec++;
         }
       }
     }
     //Solid & volume
     DDSolid solid;
     double alpha1 = alpha;
     if (getLayerGap(i) > 1.e-6) {
       double rmid = 0.5 * (rin + rout);
       double width = rmid * tan(alpha) - getLayerGap(i);
       alpha1 = atan(width / rmid);
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("HCalGeom") << "\t"
                                    << "Alpha_1 modified from " << convertRadToDeg(alpha) << " to "
                                    << convertRadToDeg(alpha1) << " Rmid " << rmid << " Reduced width " << width;
 #endif
     }
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << name << " (Layer " << i << ") Polyhedra made of "
                                  << getLayerMaterial(i) << " with 1 sector from " << convertRadToDeg(-alpha1) << " to "
                                  << convertRadToDeg(alpha1) << " and with " << nsec << " sections";
     for (unsigned int k = 0; k < pgonZ.size(); k++)
       edm::LogVerbatim("HCalGeom") << "\t"
                                    << "\t" << pgonZ[k] << "\t" << pgonRmin[k] << "\t" << pgonRmax[k];
 #endif
     solid = DDSolidFactory::polyhedra(DDName(name, idNameSpace), 1, -alpha1, 2 * alpha1, pgonZ, pgonRmin, pgonRmax);
     DDLogicalPart glog(DDName(name, idNameSpace), matter, solid);
  
     cpv.position(glog, sector, getLayerId(i), DDTranslation(0.0, 0.0, 0.0), DDRotation());
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << glog.name() << " number " << getLayerId(i)
                                  << " positioned in " << sector.name() << " at (0,0,0) with no rotation";
 #endif
     constructInsideLayers(glog,
                           getLayerLabel(i),
                           getLayerId(i),
                           getLayerAbsorb(i),
                           rin,
                           getLayerD1(i),
                           alpha1,
                           getLayerD2(i),
                           getLayerAlpha(i),
                           getLayerT1(i),
                           getLayerT2(i),
                           cpv);
     rin = rout;
   }
 }

References alpha, constructInsideLayers(), angle_units::operators::convertRadToDeg(), DDSplit(), MillePedeFileConverter_cfg::e, first, getLayerAbsorb(), getLayerAlpha(), getLayerD1(), getLayerD2(), getLayerGap(), getLayerId(), getLayerLabel(), getLayerMaterial(), getLayerT1(), getLayerT2(), getLayerWidth(), getNLayers(), getNsectors(), getRin(), getRmax(), getRzones(), getTanTheta(), getZoff(), mps_fire::i, idName, idNameSpace, recoMuon::in, dqmiolumiharvest::j, dqmdumpme::k, Skims_PA_cff::name, DDBase< N, C >::name(), MillePedeFileConverter_cfg::out, DDSolidFactory::polyhedra(), DDCompactView::position(), rin, rout, edm::second(), AlCaHLTBitMon_QueryRunRegistry::string, funct::tan(), and ApeEstimator_cff::width.

Referenced by constructGeneralVolume().

◆ constructMidLayer()

DDLogicalPart DDHCalBarrelAlgo::constructMidLayer	(	const DDLogicalPart &	laylog,
		const std::string &	nm,
		double	rin,
		double	alpha,
		DDCompactView &	cpv
	)

private

Definition at line 946 of file DDHCalBarrelAlgo.cc.

                                                                                                     {
   DDSolid solid;
   DDLogicalPart log, glog;
   std::string name = nm + "Mid";
   for (int k = 0; k < getAbsorberN(); k++) {
     std::string namek = name + getAbsorbName(k);
     double rsi = rin + getAbsorbD(k);
     int in = 0;
     for (int i = 0; i < getRzones() - 1; i++) {
       if (rsi >= getRmax(i))
         in = i + 1;
     }
     std::vector<double> pgonZ, pgonRmin, pgonRmax;
     // index 0
     pgonZ.emplace_back(0.0);
     pgonRmin.emplace_back(rsi);
     pgonRmax.emplace_back(rsi + getAbsorbT(k));
     // index 1
     pgonZ.emplace_back(getZoff(in) + rsi * getTanTheta(in));
     pgonRmin.emplace_back(rsi);
     pgonRmax.emplace_back(pgonRmax[0]);
     // index 2
     pgonZ.emplace_back(getZoff(in) + pgonRmax[0] * getTanTheta(in));
     pgonRmin.emplace_back(pgonRmax[1]);
     pgonRmax.emplace_back(pgonRmax[1]);
     solid = DDSolidFactory::polyhedra(DDName(namek, idNameSpace), 1, -alpha, 2 * alpha, pgonZ, pgonRmin, pgonRmax);
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << solid.name() << " Polyhedra made of " << getAbsorbMat(k)
                                  << " with 1 sector from " << convertRadToDeg(-alpha) << " to "
                                  << convertRadToDeg(alpha) << " and with " << pgonZ.size() << " sections";
     for (unsigned int ii = 0; ii < pgonZ.size(); ii++)
       edm::LogVerbatim("HCalGeom") << "\t\tZ = " << pgonZ[ii] << "\tRmin = " << pgonRmin[ii]
                                    << "\tRmax = " << pgonRmax[ii];
 #endif
  
     DDName matName(DDSplit(getAbsorbMat(k)).first, DDSplit(getAbsorbMat(k)).second);
     DDMaterial matter(matName);
     log = DDLogicalPart(solid.ddname(), matter, solid);
  
     cpv.position(log, laylog, 1, DDTranslation(), DDRotation());
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << log.name() << " Number 1 positioned in " << laylog.name()
                                  << " at (0,0,0) with no rotation";
 #endif
     if (k == 0) {
       double rmin = pgonRmin[0];
       double rmax = pgonRmax[0];
       DDLogicalPart mother = log;
       for (int i = 0; i < 1; i++) {
         double alpha1 = atan(getMidAbsW(i) / rmin);
         std::string namek = name + getMidAbsName(i);
         solid =
             DDSolidFactory::polyhedra(DDName(namek, idNameSpace), 1, -alpha1, 2 * alpha1, pgonZ, pgonRmin, pgonRmax);
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << solid.name() << " Polyhedra made of " << getMidAbsMat(i)
                                      << " with 1 sector from " << convertRadToDeg(-alpha1) << " to "
                                      << convertRadToDeg(alpha1) << " and with " << pgonZ.size() << " sections";
         for (unsigned int ii = 0; ii < pgonZ.size(); ii++)
           edm::LogVerbatim("HCalGeom") << "\t\tZ = " << pgonZ[ii] << "\tRmin = " << pgonRmin[ii]
                                        << "\tRmax = " << pgonRmax[ii];
 #endif
  
         DDName matNam1(DDSplit(getMidAbsMat(i)).first, DDSplit(getMidAbsMat(i)).second);
         DDMaterial matter1(matNam1);
         log = DDLogicalPart(solid.ddname(), matter1, solid);
  
         cpv.position(log, mother, 1, DDTranslation(), DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << log.name() << " Number 1 positioned in "
                                      << mother.name() << " at (0,0,0) with no rotation";
 #endif
         mother = log;
       }
  
       // Now the layer with detectors
       double rmid = rmin + getMiddleD();
       pgonRmin[0] = rmid;
       pgonRmax[0] = rmax;
       pgonRmin[1] = rmid;
       pgonRmax[1] = rmax;
       pgonZ[1] = getZoff(in) + rmid * getTanTheta(in);
       pgonRmin[2] = rmax;
       pgonRmax[2] = rmax;
       pgonZ[2] = getZoff(in) + rmax * getTanTheta(in);
       double alpha1 = atan(getMiddleW() / rmin);
       solid = DDSolidFactory::polyhedra(DDName(name, idNameSpace), 1, -alpha1, 2 * alpha1, pgonZ, pgonRmin, pgonRmax);
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << solid.name() << " Polyhedra made of " << getMiddleMat()
                                    << " with 1 sector from " << convertRadToDeg(-alpha1) << " to "
                                    << convertRadToDeg(alpha1) << " and with " << pgonZ.size() << " sections";
       for (unsigned int ii = 0; ii < pgonZ.size(); ii++)
         edm::LogVerbatim("HCalGeom") << "\t\tZ = " << pgonZ[ii] << "\tRmin = " << pgonRmin[ii]
                                      << "\tRmax = " << pgonRmax[ii];
 #endif
  
       DDName matNam1(DDSplit(getMiddleMat()).first, DDSplit(getMiddleMat()).second);
       DDMaterial matter1(matNam1);
       glog = DDLogicalPart(solid.ddname(), matter1, solid);
  
       cpv.position(glog, mother, 1, DDTranslation(), DDRotation());
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << glog.name() << " Number 1 positioned in " << mother.name()
                                    << " at (0,0,0) with no rotation";
 #endif
       // Now the remaining absorber layers
       for (int i = 1; i < getMidAbsorber(); i++) {
         namek = name + getMidAbsName(i);
         rmid = rmin + getMidAbsT(i);
         pgonRmin[0] = rmin;
         pgonRmax[0] = rmid;
         pgonRmin[1] = rmin;
         pgonRmax[1] = rmid;
         pgonZ[1] = getZoff(in) + rmin * getTanTheta(in);
         pgonRmin[2] = rmid;
         pgonRmax[2] = rmid;
         pgonZ[2] = getZoff(in) + rmid * getTanTheta(in);
         alpha1 = atan(getMidAbsW(i) / rmin);
         solid =
             DDSolidFactory::polyhedra(DDName(namek, idNameSpace), 1, -alpha1, 2 * alpha1, pgonZ, pgonRmin, pgonRmax);
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << solid.name() << " Polyhedra made of " << getMidAbsMat(i)
                                      << " with 1 sector from " << convertRadToDeg(-alpha1) << " to "
                                      << convertRadToDeg(alpha1) << " and with " << pgonZ.size() << " sections";
         for (unsigned int ii = 0; ii < pgonZ.size(); ii++)
           edm::LogVerbatim("HCalGeom") << "\t\tZ = " << pgonZ[ii] << "\tRmin = " << pgonRmin[ii]
                                        << "\tRmax = " << pgonRmax[ii];
 #endif
  
         DDName matName2(DDSplit(getMidAbsMat(i)).first, DDSplit(getMidAbsMat(i)).second);
         DDMaterial matter2(matName2);
         log = DDLogicalPart(solid.ddname(), matter2, solid);
  
         cpv.position(log, mother, i, DDTranslation(), DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << log.name() << " Number " << i << " positioned in "
                                      << mother.name() << " at (0,0,0) with no "
                                      << "rotation";
 #endif
         mother = log;
       }
     }
   }
   return glog;
 }

References alpha, angle_units::operators::convertRadToDeg(), DDBase< N, C >::ddname(), DDSplit(), first, getAbsorbD(), getAbsorberN(), getAbsorbMat(), getAbsorbName(), getAbsorbT(), getMidAbsMat(), getMidAbsName(), getMidAbsorber(), getMidAbsT(), getMidAbsW(), getMiddleD(), getMiddleMat(), getMiddleW(), getRmax(), getRzones(), getTanTheta(), getZoff(), mps_fire::i, idNameSpace, cuy::ii, recoMuon::in, dqmdumpme::k, dqm-mbProfile::log, Skims_PA_cff::name, DDBase< N, C >::name(), DDSolidFactory::polyhedra(), DDCompactView::position(), rin, rmax, edm::second(), and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by constructInsideLayers().

◆ constructSideLayer()

DDLogicalPart DDHCalBarrelAlgo::constructSideLayer	(	const DDLogicalPart &	laylog,
		const std::string &	nm,
		int	nAbs,
		double	rin,
		double	alpha,
		DDCompactView &	cpv
	)

private

Definition at line 869 of file DDHCalBarrelAlgo.cc.

                                                                                                               {
   //Extra absorber layer
   int k = abs(nAbs) - 1;
   std::string namek = nm + "Side";
   double rsi = rin + getSideD(k);
   int in = 0;
   for (int i = 0; i < getRzones() - 1; i++) {
     if (rsi >= getRmax(i))
       in = i + 1;
   }
   std::vector<double> pgonZ, pgonRmin, pgonRmax;
   // index 0
   pgonZ.emplace_back(0.0);
   pgonRmin.emplace_back(rsi);
   pgonRmax.emplace_back(rsi + getSideT(k));
   // index 1
   pgonZ.emplace_back(getZoff(in) + rsi * getTanTheta(in));
   pgonRmin.emplace_back(rsi);
   pgonRmax.emplace_back(pgonRmax[0]);
   // index 2
   pgonZ.emplace_back(getZoff(in) + pgonRmax[0] * getTanTheta(in));
   pgonRmin.emplace_back(pgonRmax[1]);
   pgonRmax.emplace_back(pgonRmax[1]);
   DDSolid solid =
       DDSolidFactory::polyhedra(DDName(namek, idNameSpace), 1, -alpha, 2 * alpha, pgonZ, pgonRmin, pgonRmax);
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << solid.name() << " Polyhedra made of " << getSideMat(k)
                                << " with 1 sector from " << convertRadToDeg(-alpha) << " to " << convertRadToDeg(alpha)
                                << " and with " << pgonZ.size() << " sections";
   for (unsigned int ii = 0; ii < pgonZ.size(); ii++)
     edm::LogVerbatim("HCalGeom") << "\t\tZ = " << pgonZ[ii] << "\tRmin = " << pgonRmin[ii]
                                  << "\tRmax = " << pgonRmax[ii];
 #endif
  
   DDName matName(DDSplit(getSideMat(k)).first, DDSplit(getSideMat(k)).second);
   DDMaterial matter(matName);
   DDLogicalPart glog = DDLogicalPart(solid.ddname(), matter, solid);
  
   cpv.position(glog, laylog, 1, DDTranslation(), DDRotation());
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << glog.name() << " Number 1 positioned in " << laylog.name()
                                << " at (0,0,0) with no rotation";
 #endif
   if (nAbs < 0) {
     DDLogicalPart mother = glog;
     double rmid = pgonRmax[0];
     for (int i = 0; i < getSideAbsorber(); i++) {
       double alpha1 = atan(getSideAbsW(i) / rmid);
       if (alpha1 > 0) {
         std::string name = namek + getSideAbsName(i);
         solid = DDSolidFactory::polyhedra(DDName(name, idNameSpace), 1, -alpha1, 2 * alpha1, pgonZ, pgonRmin, pgonRmax);
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << solid.name() << " Polyhedra made of "
                                      << getSideAbsMat(i) << " with 1 sector from " << convertRadToDeg(-alpha1) << " to "
                                      << convertRadToDeg(alpha1) << " and with " << pgonZ.size() << " sections";
         for (unsigned int ii = 0; ii < pgonZ.size(); ii++)
           edm::LogVerbatim("HCalGeom") << "\t\tZ = " << pgonZ[ii] << "\tRmin = " << pgonRmin[ii]
                                        << "\tRmax = " << pgonRmax[ii];
 #endif
  
         DDName matName(DDSplit(getSideAbsMat(i)).first, DDSplit(getSideAbsMat(i)).second);
         DDMaterial matter(matName);
         DDLogicalPart log = DDLogicalPart(solid.ddname(), matter, solid);
  
         cpv.position(log, mother, 1, DDTranslation(), DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << log.name() << " Number 1 positioned in "
                                      << mother.name() << " at (0,0,0) with no rotation";
 #endif
         mother = log;
       }
     }
   }
   return glog;
 }

References funct::abs(), alpha, angle_units::operators::convertRadToDeg(), DDBase< N, C >::ddname(), DDSplit(), first, getRmax(), getRzones(), getSideAbsMat(), getSideAbsName(), getSideAbsorber(), getSideAbsW(), getSideD(), getSideMat(), getSideT(), getTanTheta(), getZoff(), mps_fire::i, idNameSpace, cuy::ii, recoMuon::in, dqmdumpme::k, dqm-mbProfile::log, Skims_PA_cff::name, DDBase< N, C >::name(), DDSolidFactory::polyhedra(), DDCompactView::position(), rin, edm::second(), and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by constructInsideLayers().

◆ execute()

void DDHCalBarrelAlgo::execute ( DDCompactView & cpv )

override

Definition at line 448 of file DDHCalBarrelAlgo.cc.

                                                  {
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "==>> Constructing DDHCalBarrelAlgo...";
 #endif
   constructGeneralVolume(cpv);
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "<<== End of DDHCalBarrelAlgo construction";
 #endif
 }

References constructGeneralVolume().

◆ getAbsorbD()

double DDHCalBarrelAlgo::getAbsorbD ( unsigned int i ) const

inline

Definition at line 72 of file DDHCalBarrelAlgo.cc.

72 { return absorbD[i]; }

References mps_fire::i.

Referenced by constructMidLayer().

◆ getAbsorberN()

int DDHCalBarrelAlgo::getAbsorberN ( ) const

inline

Definition at line 69 of file DDHCalBarrelAlgo.cc.

69 { return nAbsorber; }

Referenced by constructMidLayer().

◆ getAbsorbMat()

const std::string& DDHCalBarrelAlgo::getAbsorbMat ( unsigned int i ) const

inline

Definition at line 71 of file DDHCalBarrelAlgo.cc.

71 { return absorbMat[i]; }

References mps_fire::i.

Referenced by constructMidLayer().

◆ getAbsorbName()

const std::string& DDHCalBarrelAlgo::getAbsorbName ( unsigned int i ) const

inline

Definition at line 70 of file DDHCalBarrelAlgo.cc.

70 { return absorbName[i]; }

References mps_fire::i.

Referenced by constructMidLayer().

◆ getAbsorbT()

double DDHCalBarrelAlgo::getAbsorbT ( unsigned int i ) const

inline

Definition at line 73 of file DDHCalBarrelAlgo.cc.

73 { return absorbT[i]; }

References mps_fire::i.

Referenced by constructMidLayer().

◆ getDetdP1()

double DDHCalBarrelAlgo::getDetdP1 ( unsigned int i ) const

inline

Definition at line 87 of file DDHCalBarrelAlgo.cc.

87 { return detdP1[i]; }

References mps_fire::i.

Referenced by constructInsideDetectors().

◆ getDetdP2()

double DDHCalBarrelAlgo::getDetdP2 ( unsigned int i ) const

inline

Definition at line 88 of file DDHCalBarrelAlgo.cc.

88 { return detdP2[i]; }

References mps_fire::i.

Referenced by constructInsideDetectors().

◆ getDetMat()

const std::string& DDHCalBarrelAlgo::getDetMat ( ) const

inline

Definition at line 83 of file DDHCalBarrelAlgo.cc.

83 { return detMat; }

Referenced by constructInsideLayers().

◆ getDetMatPl()

const std::string& DDHCalBarrelAlgo::getDetMatPl ( ) const

inline

Definition at line 84 of file DDHCalBarrelAlgo.cc.

84 { return detMatPl; }

Referenced by constructInsideDetectors().

◆ getDetMatSc()

const std::string& DDHCalBarrelAlgo::getDetMatSc ( ) const

inline

Definition at line 85 of file DDHCalBarrelAlgo.cc.

85 { return detMatSc; }

Referenced by constructInsideDetectors().

◆ getDetPosY()

int DDHCalBarrelAlgo::getDetPosY ( unsigned int i ) const

inline

Definition at line 96 of file DDHCalBarrelAlgo.cc.

96 { return detPosY[i]; }

References mps_fire::i.

Referenced by constructInsideDetectors().

◆ getDetT11()

double DDHCalBarrelAlgo::getDetT11 ( unsigned int i ) const

inline

Definition at line 89 of file DDHCalBarrelAlgo.cc.

89 { return detT11[i]; }

References mps_fire::i.

Referenced by constructInsideDetectors().

◆ getDetT12()

double DDHCalBarrelAlgo::getDetT12 ( unsigned int i ) const

inline

Definition at line 90 of file DDHCalBarrelAlgo.cc.

90 { return detT12[i]; }

References mps_fire::i.

Referenced by constructInsideDetectors().

◆ getDetT21()

double DDHCalBarrelAlgo::getDetT21 ( unsigned int i ) const

inline

Definition at line 92 of file DDHCalBarrelAlgo.cc.

92 { return detT21[i]; }

References mps_fire::i.

Referenced by constructInsideDetectors().

◆ getDetT22()

double DDHCalBarrelAlgo::getDetT22 ( unsigned int i ) const

inline

Definition at line 93 of file DDHCalBarrelAlgo.cc.

93 { return detT22[i]; }

References mps_fire::i.

Referenced by constructInsideDetectors().

◆ getDetTsc()

double DDHCalBarrelAlgo::getDetTsc ( unsigned int i ) const

inline

Definition at line 91 of file DDHCalBarrelAlgo.cc.

91 { return detTsc[i]; }

References mps_fire::i.

Referenced by constructInsideDetectors().

◆ getDetType()

int DDHCalBarrelAlgo::getDetType ( unsigned int i ) const

inline

Definition at line 86 of file DDHCalBarrelAlgo.cc.

86 { return detType[i]; }

References mps_fire::i.

Referenced by constructInsideDetectors().

◆ getDetWidth1()

double DDHCalBarrelAlgo::getDetWidth1 ( unsigned int i ) const

inline

Definition at line 94 of file DDHCalBarrelAlgo.cc.

94 { return detWidth1[i]; }

References mps_fire::i.

Referenced by constructInsideDetectors().

◆ getDetWidth2()

double DDHCalBarrelAlgo::getDetWidth2 ( unsigned int i ) const

inline

Definition at line 95 of file DDHCalBarrelAlgo.cc.

95 { return detWidth2[i]; }

References mps_fire::i.

Referenced by constructInsideDetectors().

◆ getGenMaterial()

const std::string& DDHCalBarrelAlgo::getGenMaterial ( ) const

inline

Definition at line 36 of file DDHCalBarrelAlgo.cc.

36 { return genMaterial; }

Referenced by constructGeneralVolume().

◆ getLayerAbsorb()

int DDHCalBarrelAlgo::getLayerAbsorb ( unsigned int i ) const

inline

Definition at line 58 of file DDHCalBarrelAlgo.cc.

58 { return layerAbsorb[i]; }

References mps_fire::i.

Referenced by constructInsideSector().

◆ getLayerAlpha()

double DDHCalBarrelAlgo::getLayerAlpha ( unsigned i ) const

inline

Definition at line 55 of file DDHCalBarrelAlgo.cc.

55 { return layerAlpha[i]; }

References mps_fire::i.

Referenced by constructInsideSector().

◆ getLayerD1()

double DDHCalBarrelAlgo::getLayerD1 ( unsigned i ) const

inline

Definition at line 53 of file DDHCalBarrelAlgo.cc.

53 { return layerD1[i]; }

References mps_fire::i.

Referenced by constructInsideSector().

◆ getLayerD2()

double DDHCalBarrelAlgo::getLayerD2 ( unsigned i ) const

inline

Definition at line 54 of file DDHCalBarrelAlgo.cc.

54 { return layerD2[i]; }

References mps_fire::i.

Referenced by constructInsideSector().

◆ getLayerGap()

double DDHCalBarrelAlgo::getLayerGap ( unsigned int i ) const

inline

Definition at line 59 of file DDHCalBarrelAlgo.cc.

59 { return layerGap[i]; }

References mps_fire::i.

Referenced by constructInsideSector().

◆ getLayerId()

int DDHCalBarrelAlgo::getLayerId ( unsigned i ) const

inline

Definition at line 49 of file DDHCalBarrelAlgo.cc.

49 { return layerId[i]; }

References mps_fire::i.

Referenced by constructInsideSector().

◆ getLayerLabel()

const std::string& DDHCalBarrelAlgo::getLayerLabel ( unsigned i ) const

inline

Definition at line 50 of file DDHCalBarrelAlgo.cc.

50 { return layerLabel[i]; }

References mps_fire::i.

Referenced by constructInsideSector().

◆ getLayerMaterial()

const std::string& DDHCalBarrelAlgo::getLayerMaterial ( unsigned i ) const

inline

Definition at line 51 of file DDHCalBarrelAlgo.cc.

51 { return layerMat[i]; }

References mps_fire::i.

Referenced by constructInsideSector().

◆ getLayerT1()

double DDHCalBarrelAlgo::getLayerT1 ( unsigned i ) const

inline

Definition at line 56 of file DDHCalBarrelAlgo.cc.

56 { return layerT1[i]; }

References mps_fire::i.

Referenced by constructInsideSector().

◆ getLayerT2()

double DDHCalBarrelAlgo::getLayerT2 ( unsigned i ) const

inline

Definition at line 57 of file DDHCalBarrelAlgo.cc.

57 { return layerT2[i]; }

References mps_fire::i.

Referenced by constructInsideSector().

◆ getLayerWidth()

double DDHCalBarrelAlgo::getLayerWidth ( unsigned i ) const

inline

Definition at line 52 of file DDHCalBarrelAlgo.cc.

52 { return layerWidth[i]; }

References mps_fire::i.

Referenced by constructInsideSector().

◆ getMidAbsMat()

const std::string& DDHCalBarrelAlgo::getMidAbsMat ( unsigned int i ) const

inline

Definition at line 79 of file DDHCalBarrelAlgo.cc.

79 { return midMat[i]; }

References mps_fire::i.

Referenced by constructMidLayer().

◆ getMidAbsName()

const std::string& DDHCalBarrelAlgo::getMidAbsName ( unsigned int i ) const

inline

Definition at line 78 of file DDHCalBarrelAlgo.cc.

78 { return midName[i]; }

References mps_fire::i.

Referenced by constructMidLayer().

◆ getMidAbsorber()

int DDHCalBarrelAlgo::getMidAbsorber ( ) const

inline

Definition at line 77 of file DDHCalBarrelAlgo.cc.

77 { return nMidAbs; }

Referenced by constructMidLayer().

◆ getMidAbsT()

double DDHCalBarrelAlgo::getMidAbsT ( unsigned int i ) const

inline

Definition at line 81 of file DDHCalBarrelAlgo.cc.

81 { return midT[i]; }

References mps_fire::i.

Referenced by constructMidLayer().

◆ getMidAbsW()

double DDHCalBarrelAlgo::getMidAbsW ( unsigned int i ) const

inline

Definition at line 80 of file DDHCalBarrelAlgo.cc.

80 { return midW[i]; }

References mps_fire::i.

Referenced by constructMidLayer().

◆ getMiddleD()

double DDHCalBarrelAlgo::getMiddleD ( ) const

inline

Definition at line 75 of file DDHCalBarrelAlgo.cc.

75 { return middleD; }

Referenced by constructMidLayer().

◆ getMiddleMat()

const std::string& DDHCalBarrelAlgo::getMiddleMat ( ) const

inline

Definition at line 74 of file DDHCalBarrelAlgo.cc.

74 { return middleMat; }

Referenced by constructMidLayer().

◆ getMiddleW()

double DDHCalBarrelAlgo::getMiddleW ( ) const

inline

Definition at line 76 of file DDHCalBarrelAlgo.cc.

76 { return middleW; }

Referenced by constructMidLayer().

◆ getNhalf()

int DDHCalBarrelAlgo::getNhalf ( ) const

inline

Definition at line 39 of file DDHCalBarrelAlgo.cc.

39 { return nhalf; }

Referenced by constructGeneralVolume().

◆ getNLayers()

int DDHCalBarrelAlgo::getNLayers ( ) const

inline

Definition at line 48 of file DDHCalBarrelAlgo.cc.

48 { return nLayers; }

References MuonTCMETValueMapProducer_cff::nLayers.

Referenced by constructInsideSector().

◆ getNsectors()

int DDHCalBarrelAlgo::getNsectors ( ) const

inline

Definition at line 37 of file DDHCalBarrelAlgo.cc.

37 { return nsectors; }

Referenced by constructGeneralVolume(), and constructInsideSector().

◆ getNsectortot()

int DDHCalBarrelAlgo::getNsectortot ( ) const

inline

Definition at line 38 of file DDHCalBarrelAlgo.cc.

38 { return nsectortot; }

Referenced by constructGeneralVolume().

◆ getRin()

double DDHCalBarrelAlgo::getRin ( ) const

inline

Definition at line 40 of file DDHCalBarrelAlgo.cc.

40 { return rin; }

Referenced by constructGeneralVolume(), and constructInsideSector().

◆ getRmax()

double DDHCalBarrelAlgo::getRmax ( unsigned int i ) const

inline

Definition at line 45 of file DDHCalBarrelAlgo.cc.

45 { return rmax[i]; }

References mps_fire::i.

Referenced by constructGeneralVolume(), constructInsideLayers(), constructInsideSector(), constructMidLayer(), and constructSideLayer().

◆ getRout()

double DDHCalBarrelAlgo::getRout ( ) const

inline

Definition at line 41 of file DDHCalBarrelAlgo.cc.

41 { return rout; }

Referenced by constructGeneralVolume().

◆ getRzones()

int DDHCalBarrelAlgo::getRzones ( ) const

inline

Definition at line 42 of file DDHCalBarrelAlgo.cc.

42 { return rzones; }

Referenced by constructInsideLayers(), constructInsideSector(), constructMidLayer(), and constructSideLayer().

◆ getSideAbsMat()

const std::string& DDHCalBarrelAlgo::getSideAbsMat ( unsigned int i ) const

inline

Definition at line 66 of file DDHCalBarrelAlgo.cc.

66 { return sideAbsMat[i]; }

References mps_fire::i.

Referenced by constructSideLayer().

◆ getSideAbsName()

const std::string& DDHCalBarrelAlgo::getSideAbsName ( unsigned int i ) const

inline

Definition at line 65 of file DDHCalBarrelAlgo.cc.

65 { return sideAbsName[i]; }

References mps_fire::i.

Referenced by constructSideLayer().

◆ getSideAbsorber()

int DDHCalBarrelAlgo::getSideAbsorber ( ) const

inline

Definition at line 64 of file DDHCalBarrelAlgo.cc.

64 { return nSideAbs; }

Referenced by constructSideLayer().

◆ getSideAbsW()

double DDHCalBarrelAlgo::getSideAbsW ( unsigned int i ) const

inline

Definition at line 67 of file DDHCalBarrelAlgo.cc.

67 { return sideAbsW[i]; }

References mps_fire::i.

Referenced by constructSideLayer().

◆ getSideD()

double DDHCalBarrelAlgo::getSideD ( unsigned int i ) const

inline

Definition at line 62 of file DDHCalBarrelAlgo.cc.

62 { return sideD[i]; }

References mps_fire::i.

Referenced by constructSideLayer().

◆ getSideMat()

const std::string& DDHCalBarrelAlgo::getSideMat ( unsigned int i ) const

inline

Definition at line 61 of file DDHCalBarrelAlgo.cc.

61 { return sideMat[i]; }

References mps_fire::i.

Referenced by constructSideLayer().

◆ getSideT()

double DDHCalBarrelAlgo::getSideT ( unsigned int i ) const

inline

Definition at line 63 of file DDHCalBarrelAlgo.cc.

63 { return sideT[i]; }

References mps_fire::i.

Referenced by constructSideLayer().

◆ getTanTheta()

double DDHCalBarrelAlgo::getTanTheta ( unsigned int i ) const

inline

Definition at line 43 of file DDHCalBarrelAlgo.cc.

43 { return ttheta[i]; }

References mps_fire::i.

Referenced by constructGeneralVolume(), constructInsideLayers(), constructInsideSector(), constructMidLayer(), and constructSideLayer().

◆ getTheta()

double DDHCalBarrelAlgo::getTheta ( unsigned int i ) const

inline

Definition at line 44 of file DDHCalBarrelAlgo.cc.

44 { return theta[i]; }

References mps_fire::i, and theta().

◆ getZoff()

double DDHCalBarrelAlgo::getZoff ( unsigned int i ) const

inline

Definition at line 46 of file DDHCalBarrelAlgo.cc.

46 { return zoff[i]; }

References mps_fire::i.

Referenced by constructGeneralVolume(), constructInsideLayers(), constructInsideSector(), constructMidLayer(), and constructSideLayer().

◆ initialize()

void DDHCalBarrelAlgo::initialize	(	const DDNumericArguments &	nArgs,
		const DDVectorArguments &	vArgs,
		const DDMapArguments &	mArgs,
		const DDStringArguments &	sArgs,
		const DDStringVectorArguments &	vsArgs
	)

override

Definition at line 300 of file DDHCalBarrelAlgo.cc.

                                                                          {
   genMaterial = sArgs["MaterialName"];
   nsectors = int(nArgs["NSector"]);
   nsectortot = int(nArgs["NSectorTot"]);
   nhalf = int(nArgs["NHalf"]);
   rin = nArgs["RIn"];
   rout = nArgs["ROut"];
   rzones = int(nArgs["RZones"]);
   rotHalf = sArgs["RotHalf"];
   rotns = sArgs["RotNameSpace"];
  
   theta = vArgs["Theta"];
   rmax = vArgs["RMax"];
   zoff = vArgs["ZOff"];
   for (int i = 0; i < rzones; i++) {
     ttheta.emplace_back(tan(theta[i]));  //*deg already done in XML
   }
   if (rzones > 3)
     rmax[2] = (zoff[3] - zoff[2]) / ttheta[2];
  
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: General material " << genMaterial << "\tSectors " << nsectors
                                << ", " << nsectortot << "\tHalves " << nhalf << "\tRotation matrix " << rotns << ":"
                                << rotHalf << "\n\t\t" << rin << "\t" << rout << "\t" << rzones;
   for (int i = 0; i < rzones; i++)
     edm::LogVerbatim("HCalGeom") << "\tTheta[" << i << "] = " << theta[i] << "\trmax[" << i << "] = " << rmax[i]
                                  << "\tzoff[" << i << "] = " << zoff[i];
 #endif
   //Layers
   nLayers = int(nArgs["NLayers"]);
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: Layer\t" << nLayers;
 #endif
   layerId = dbl_to_int(vArgs["Id"]);
   layerLabel = vsArgs["LayerLabel"];
   layerMat = vsArgs["LayerMat"];
   layerWidth = vArgs["LayerWidth"];
   layerD1 = vArgs["D1"];
   layerD2 = vArgs["D2"];
   layerAlpha = vArgs["Alpha2"];
   layerT1 = vArgs["T1"];
   layerT2 = vArgs["T2"];
   layerAbsorb = dbl_to_int(vArgs["AbsL"]);
   layerGap = vArgs["Gap"];
 #ifdef EDM_ML_DEBUG
   for (int i = 0; i < nLayers; i++)
     edm::LogVerbatim("HCalGeom") << layerLabel[i] << "\t" << layerId[i] << "\t" << layerMat[i] << "\t" << layerWidth[i]
                                  << "\t" << layerD1[i] << "\t" << layerD2[i] << "\t" << layerAlpha[i] << "\t"
                                  << layerT1[i] << "\t" << layerT2[i] << "\t" << layerAbsorb[i] << "\t" << layerGap[i];
 #endif
  
   //Absorber Layers and middle part
   absorbName = vsArgs["AbsorbName"];
   absorbMat = vsArgs["AbsorbMat"];
   absorbD = vArgs["AbsorbD"];
   absorbT = vArgs["AbsorbT"];
   nAbsorber = absorbName.size();
 #ifdef EDM_ML_DEBUG
   for (int i = 0; i < nAbsorber; i++)
     edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << absorbName[i] << " Material " << absorbMat[i] << " d "
                                  << absorbD[i] << " t " << absorbT[i];
 #endif
   middleMat = sArgs["MiddleMat"];
   middleD = nArgs["MiddleD"];
   middleW = nArgs["MiddleW"];
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: Middle material " << middleMat << " d " << middleD << " w "
                                << middleW;
 #endif
   midName = vsArgs["MidAbsName"];
   midMat = vsArgs["MidAbsMat"];
   midW = vArgs["MidAbsW"];
   midT = vArgs["MidAbsT"];
   nMidAbs = midName.size();
 #ifdef EDM_ML_DEBUG
   for (int i = 0; i < nMidAbs; i++)
     edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << midName[i] << " Material " << midMat[i] << " W " << midW[i]
                                  << " T " << midT[i];
 #endif
  
   //Absorber layers in the side part
   sideMat = vsArgs["SideMat"];
   sideD = vArgs["SideD"];
   sideT = vArgs["SideT"];
 #ifdef EDM_ML_DEBUG
   for (unsigned int i = 0; i < sideMat.size(); i++)
     edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: Side material " << sideMat[i] << " d " << sideD[i] << " t "
                                  << sideT[i];
 #endif
   sideAbsName = vsArgs["SideAbsName"];
   sideAbsMat = vsArgs["SideAbsMat"];
   sideAbsW = vArgs["SideAbsW"];
   nSideAbs = sideAbsName.size();
 #ifdef EDM_ML_DEBUG
   for (int i = 0; i < nSideAbs; i++)
     edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: " << sideAbsName[i] << " Material " << sideAbsMat[i] << " W "
                                  << sideAbsW[i];
 #endif
  
   // Detectors
  
   detMat = sArgs["DetMat"];
   detRot = sArgs["DetRot"];
   detMatPl = sArgs["DetMatPl"];
   detMatSc = sArgs["DetMatSc"];
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: Detector (" << nLayers << ") Rotation matrix " << rotns << ":"
                                << detRot << "\n\t\t" << detMat << "\t" << detMatPl << "\t" << detMatSc;
 #endif
   detType = dbl_to_int(vArgs["DetType"]);
   detdP1 = vArgs["DetdP1"];
   detdP2 = vArgs["DetdP2"];
   detT11 = vArgs["DetT11"];
   detT12 = vArgs["DetT12"];
   detTsc = vArgs["DetTsc"];
   detT21 = vArgs["DetT21"];
   detT22 = vArgs["DetT22"];
   detWidth1 = vArgs["DetWidth1"];
   detWidth2 = vArgs["DetWidth2"];
   detPosY = dbl_to_int(vArgs["DetPosY"]);
 #ifdef EDM_ML_DEBUG
   for (int i = 0; i < nLayers; i++)
     edm::LogVerbatim("HCalGeom") << i + 1 << "\t" << detType[i] << "\t" << detdP1[i] << ", " << detdP2[i] << "\t"
                                  << detT11[i] << ", " << detT12[i] << "\t" << detTsc[i] << "\t" << detT21[i] << ", "
                                  << detT22[i] << "\t" << detWidth1[i] << "\t" << detWidth2[i] << "\t" << detPosY[i];
 #endif
  
   //  idName = parentName.name();
   idName = sArgs["MotherName"];
   idNameSpace = DDCurrentNamespace::ns();
   idOffset = int(nArgs["IdOffset"]);
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("HCalGeom") << "DDHCalBarrelAlgo: Parent " << parent().name() << " idName " << idName
                                << " NameSpace " << idNameSpace << " Offset " << idOffset;
 #endif
 }

References absorbD, absorbMat, absorbName, absorbT, dbl_to_int(), detdP1, detdP2, detMat, detMatPl, detMatSc, detPosY, detRot, detT11, detT12, detT21, detT22, detTsc, detType, detWidth1, detWidth2, genMaterial, mps_fire::i, idName, idNameSpace, idOffset, createfilelist::int, layerAbsorb, layerAlpha, layerD1, layerD2, layerGap, layerId, layerLabel, layerMat, layerT1, layerT2, layerWidth, middleD, middleMat, middleW, midMat, midName, midT, midW, nAbsorber, nhalf, nLayers, nMidAbs, DDCurrentNamespace::ns(), nsectors, nsectortot, nSideAbs, class-composition::parent, rin, rmax, rotHalf, rotns, rout, rzones, sideAbsMat, sideAbsName, sideAbsW, sideD, sideMat, sideT, funct::tan(), theta, ttheta, and zoff.

Member Data Documentation

◆ absorbD

std::vector<double> DDHCalBarrelAlgo::absorbD

private

Definition at line 200 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ absorbMat

std::vector<std::string> DDHCalBarrelAlgo::absorbMat

private

Definition at line 199 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ absorbName

std::vector<std::string> DDHCalBarrelAlgo::absorbName

private

Definition at line 198 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ absorbT

std::vector<double> DDHCalBarrelAlgo::absorbT

private

Definition at line 201 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ detdP1

std::vector<double> DDHCalBarrelAlgo::detdP1

private

Definition at line 236 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ detdP2

std::vector<double> DDHCalBarrelAlgo::detdP2

private

Definition at line 237 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ detMat

std::string DDHCalBarrelAlgo::detMat

private

Definition at line 231 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ detMatPl

std::string DDHCalBarrelAlgo::detMatPl

private

Definition at line 233 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ detMatSc

std::string DDHCalBarrelAlgo::detMatSc

private

Definition at line 234 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ detPosY

std::vector<int> DDHCalBarrelAlgo::detPosY

private

Definition at line 245 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ detRot

std::string DDHCalBarrelAlgo::detRot

private

Definition at line 232 of file DDHCalBarrelAlgo.cc.

Referenced by constructInsideLayers(), and initialize().

◆ detT11

std::vector<double> DDHCalBarrelAlgo::detT11

private

Definition at line 238 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ detT12

std::vector<double> DDHCalBarrelAlgo::detT12

private

Definition at line 239 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ detT21

std::vector<double> DDHCalBarrelAlgo::detT21

private

Definition at line 241 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ detT22

std::vector<double> DDHCalBarrelAlgo::detT22

private

Definition at line 242 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ detTsc

std::vector<double> DDHCalBarrelAlgo::detTsc

private

Definition at line 240 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ detType

std::vector<int> DDHCalBarrelAlgo::detType

private

Definition at line 235 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ detWidth1

std::vector<double> DDHCalBarrelAlgo::detWidth1

private

Definition at line 243 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ detWidth2

std::vector<double> DDHCalBarrelAlgo::detWidth2

private

Definition at line 244 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ genMaterial

std::string DDHCalBarrelAlgo::genMaterial

private

Definition at line 145 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ idName

std::string DDHCalBarrelAlgo::idName

private

Definition at line 247 of file DDHCalBarrelAlgo.cc.

Referenced by constructGeneralVolume(), constructInsideDetectors(), constructInsideLayers(), constructInsideSector(), and initialize().

◆ idNameSpace

std::string DDHCalBarrelAlgo::idNameSpace

private

Definition at line 248 of file DDHCalBarrelAlgo.cc.

Referenced by constructGeneralVolume(), constructInsideDetectors(), constructInsideLayers(), constructInsideSector(), constructMidLayer(), constructSideLayer(), and initialize().

◆ idOffset

int DDHCalBarrelAlgo::idOffset

private

Definition at line 249 of file DDHCalBarrelAlgo.cc.

Referenced by constructInsideLayers(), and initialize().

◆ layerAbsorb

std::vector<int> DDHCalBarrelAlgo::layerAbsorb

private

Definition at line 194 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ layerAlpha

std::vector<double> DDHCalBarrelAlgo::layerAlpha

private

Definition at line 191 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ layerD1

std::vector<double> DDHCalBarrelAlgo::layerD1

private

Definition at line 189 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ layerD2

std::vector<double> DDHCalBarrelAlgo::layerD2

private

Definition at line 190 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ layerGap

std::vector<double> DDHCalBarrelAlgo::layerGap

private

Definition at line 195 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ layerId

std::vector<int> DDHCalBarrelAlgo::layerId

private

Definition at line 185 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ layerLabel

std::vector<std::string> DDHCalBarrelAlgo::layerLabel

private

Definition at line 186 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ layerMat

std::vector<std::string> DDHCalBarrelAlgo::layerMat

private

Definition at line 187 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ layerT1

std::vector<double> DDHCalBarrelAlgo::layerT1

private

Definition at line 192 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ layerT2

std::vector<double> DDHCalBarrelAlgo::layerT2

private

Definition at line 193 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ layerWidth

std::vector<double> DDHCalBarrelAlgo::layerWidth

private

Definition at line 188 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ middleD

double DDHCalBarrelAlgo::middleD

private

Definition at line 203 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ middleMat

std::string DDHCalBarrelAlgo::middleMat

private

Definition at line 202 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ middleW

double DDHCalBarrelAlgo::middleW

private

Definition at line 204 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ midMat

std::vector<std::string> DDHCalBarrelAlgo::midMat

private

Definition at line 207 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ midName

std::vector<std::string> DDHCalBarrelAlgo::midName

private

Definition at line 206 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ midT

std::vector<double> DDHCalBarrelAlgo::midT

private

Definition at line 209 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ midW

std::vector<double> DDHCalBarrelAlgo::midW

private

Definition at line 208 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ nAbsorber

int DDHCalBarrelAlgo::nAbsorber

private

Definition at line 197 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ nhalf

int DDHCalBarrelAlgo::nhalf

private

Definition at line 148 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ nLayers

int DDHCalBarrelAlgo::nLayers

private

Definition at line 184 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ nMidAbs

int DDHCalBarrelAlgo::nMidAbs

private

Definition at line 205 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ nsectors

int DDHCalBarrelAlgo::nsectors

private

Definition at line 146 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ nsectortot

int DDHCalBarrelAlgo::nsectortot

private

Definition at line 147 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ nSideAbs

int DDHCalBarrelAlgo::nSideAbs

private

Definition at line 214 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ rin

double DDHCalBarrelAlgo::rin

private

Definition at line 149 of file DDHCalBarrelAlgo.cc.

Referenced by constructGeneralVolume(), constructInsideLayers(), constructInsideSector(), constructMidLayer(), constructSideLayer(), and initialize().

◆ rmax

std::vector<double> DDHCalBarrelAlgo::rmax

private

Definition at line 152 of file DDHCalBarrelAlgo.cc.

Referenced by constructMidLayer(), and initialize().

◆ rotHalf

std::string DDHCalBarrelAlgo::rotHalf

private

Definition at line 155 of file DDHCalBarrelAlgo.cc.

Referenced by constructGeneralVolume(), and initialize().

◆ rotns

std::string DDHCalBarrelAlgo::rotns

private

Definition at line 156 of file DDHCalBarrelAlgo.cc.

Referenced by constructGeneralVolume(), constructInsideLayers(), and initialize().

◆ rout

double DDHCalBarrelAlgo::rout

private

Definition at line 149 of file DDHCalBarrelAlgo.cc.

Referenced by constructGeneralVolume(), constructInsideSector(), and initialize().

◆ rzones

int DDHCalBarrelAlgo::rzones

private

Definition at line 150 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ sideAbsMat

std::vector<std::string> DDHCalBarrelAlgo::sideAbsMat

private

Definition at line 216 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ sideAbsName

std::vector<std::string> DDHCalBarrelAlgo::sideAbsName

private

Definition at line 215 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ sideAbsW

std::vector<double> DDHCalBarrelAlgo::sideAbsW

private

Definition at line 217 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ sideD

std::vector<double> DDHCalBarrelAlgo::sideD

private

Definition at line 212 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ sideMat

std::vector<std::string> DDHCalBarrelAlgo::sideMat

private

Definition at line 211 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ sideT

std::vector<double> DDHCalBarrelAlgo::sideT

private

Definition at line 213 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ theta

std::vector<double> DDHCalBarrelAlgo::theta

private

Definition at line 151 of file DDHCalBarrelAlgo.cc.

Referenced by constructGeneralVolume(), initialize(), and Tau.Tau::zImpact().

◆ ttheta

std::vector<double> DDHCalBarrelAlgo::ttheta

private

Definition at line 154 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

◆ zoff

std::vector<double> DDHCalBarrelAlgo::zoff

private

Definition at line 153 of file DDHCalBarrelAlgo.cc.

Referenced by initialize().

Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ DDHCalBarrelAlgo()

◆ ~DDHCalBarrelAlgo()

Member Function Documentation

◆ constructGeneralVolume()

◆ constructInsideDetectors()

◆ constructInsideLayers()

◆ constructInsideSector()

◆ constructMidLayer()

◆ constructSideLayer()

◆ execute()

◆ getAbsorbD()

◆ getAbsorberN()

◆ getAbsorbMat()

◆ getAbsorbName()

◆ getAbsorbT()

◆ getDetdP1()

◆ getDetdP2()

◆ getDetMat()

◆ getDetMatPl()

◆ getDetMatSc()

◆ getDetPosY()

◆ getDetT11()

◆ getDetT12()

◆ getDetT21()

◆ getDetT22()

◆ getDetTsc()

◆ getDetType()

◆ getDetWidth1()

◆ getDetWidth2()

◆ getGenMaterial()

◆ getLayerAbsorb()

◆ getLayerAlpha()

◆ getLayerD1()

◆ getLayerD2()

◆ getLayerGap()

◆ getLayerId()

◆ getLayerLabel()

◆ getLayerMaterial()

◆ getLayerT1()

◆ getLayerT2()

◆ getLayerWidth()

◆ getMidAbsMat()

◆ getMidAbsName()

◆ getMidAbsorber()

◆ getMidAbsT()

◆ getMidAbsW()

◆ getMiddleD()

◆ getMiddleMat()

◆ getMiddleW()

◆ getNhalf()

◆ getNLayers()

◆ getNsectors()

◆ getNsectortot()

◆ getRin()

◆ getRmax()

◆ getRout()

◆ getRzones()

◆ getSideAbsMat()

◆ getSideAbsName()

◆ getSideAbsorber()

◆ getSideAbsW()

◆ getSideD()

◆ getSideMat()

◆ getSideT()

◆ getTanTheta()

◆ getTheta()

◆ getZoff()

◆ initialize()

Member Data Documentation

◆ absorbD

◆ absorbMat

◆ absorbName

◆ absorbT

◆ detdP1

◆ detdP2