HDShower.cc

Go to the documentation of this file.

//updated by Reza Goldouzian
//FastSimulation Headers
#include "FastSimulation/ShowerDevelopment/interface/HDShower.h"
#include "FastSimulation/Utilities/interface/RandomEngineAndDistribution.h"
 
#include "FastSimulation/CaloHitMakers/interface/EcalHitMaker.h"
#include "FastSimulation/CaloHitMakers/interface/HcalHitMaker.h"
 
// CMSSW headers
#include "FWCore/MessageLogger/interface/MessageLogger.h"
 
#include <cmath>
 
// number attempts for transverse distribution if exit on a spec. condition
#define infinity 10000
// debugging flag ( 0, 1, 2, 3)
#define debug 0
 
using namespace edm;
 
HDShower::HDShower(const RandomEngineAndDistribution* engine,
                   HDShowerParametrization* myParam,
                   EcalHitMaker* myGrid,
                   HcalHitMaker* myHcalHitMaker,
                   int onECAL,
                   double epart,
                   double pmip)
    : theParam(myParam),
      theGrid(myGrid),
      theHcalHitMaker(myHcalHitMaker),
      onEcal(onECAL),
      e(epart),
      //    pmip(pmip),
      random(engine) {
  // To get an access to constants read in FASTCalorimeter
  //  FASTCalorimeter * myCalorimeter= FASTCalorimeter::instance();
 
  // Values taken from FamosGeneric/FamosCalorimeter/src/FASTCalorimeter.cc
  lossesOpt = myParam->hsParameters()->getHDlossesOpt();
  nDepthSteps = myParam->hsParameters()->getHDnDepthSteps();
  nTRsteps = myParam->hsParameters()->getHDnTRsteps();
  transParam = myParam->hsParameters()->getHDtransParam();
  eSpotSize = myParam->hsParameters()->getHDeSpotSize();
  depthStep = myParam->hsParameters()->getHDdepthStep();
  criticalEnergy = myParam->hsParameters()->getHDcriticalEnergy();
  maxTRfactor = myParam->hsParameters()->getHDmaxTRfactor();
  balanceEH = myParam->hsParameters()->getHDbalanceEH();
  hcalDepthFactor = myParam->hsParameters()->getHDhcalDepthFactor();
 
  // Special tr.size fluctuations
  transParam *= (1. + random->flatShoot());
 
  // Special long. fluctuations
  hcalDepthFactor += 0.05 * (2. * random->flatShoot() - 1.);
 
  transFactor = 1.;  // normally 1, in HF - might be smaller
                     // to take into account
                     // a narrowness of the HF shower (Cherenkov light)
 
  // simple protection ...
  if (e < 0)
    e = 0.;
 
  // Get the Famos Histos pointer
  //  myHistos = FamosHistos::instance();
  //  std::cout << " Hello FamosShower " << std::endl;
 
  theECALproperties = theParam->ecalProperties();
  theHCALproperties = theParam->hcalProperties();
 
  double emax = theParam->emax();
  double emid = theParam->emid();
  double emin = theParam->emin();
  double effective = e;
 
  if (e < emid) {
    theParam->setCase(1);
    // avoid "underflow" below Emin (for parameters calculation only)
    if (e < emin)
      effective = emin;
  } else
    theParam->setCase(2);
 
  // Avoid "overflow" beyond Emax (for parameters)
  if (effective > 0.5 * emax) {
    eSpotSize *= 2.5;
    if (effective > emax) {
      effective = emax;
      eSpotSize *= 4.;
      depthStep *= 2.;
      if (effective > 1000.)
        eSpotSize *= 2.;
    }
  }
 
  if (debug == 2)
    LogInfo("FastCalorimetry") << " HDShower : " << std::endl
                               << "       Energy   " << e << std::endl
                               << "      lossesOpt " << lossesOpt << std::endl
                               << "    nDepthSteps " << nDepthSteps << std::endl
                               << "       nTRsteps " << nTRsteps << std::endl
                               << "     transParam " << transParam << std::endl
                               << "      eSpotSize " << eSpotSize << std::endl
                               << " criticalEnergy " << criticalEnergy << std::endl
                               << "    maxTRfactor " << maxTRfactor << std::endl
                               << "      balanceEH " << balanceEH << std::endl
                               << "hcalDepthFactor " << hcalDepthFactor << std::endl;
 
  double alpEM1 = theParam->alpe1();
  double alpEM2 = theParam->alpe2();
 
  double betEM1 = theParam->bete1();
  double betEM2 = theParam->bete2();
 
  double alpHD1 = theParam->alph1();
  double alpHD2 = theParam->alph2();
 
  double betHD1 = theParam->beth1();
  double betHD2 = theParam->beth2();
 
  double part1 = theParam->part1();
  double part2 = theParam->part2();
 
  aloge = std::log(effective);
 
  double edpar = (theParam->e1() + aloge * theParam->e2()) * effective;
  double aedep = std::log(edpar);
 
  if (debug == 2)
    LogInfo("FastCalorimetry") << " HDShower : " << std::endl
                               << "     edpar " << edpar << "   aedep " << aedep << std::endl
                               << "    alpEM1 " << alpEM1 << std::endl
                               << "    alpEM2 " << alpEM2 << std::endl
                               << "    betEM1 " << betEM1 << std::endl
                               << "    betEM2 " << betEM2 << std::endl
                               << "    alpHD1 " << alpHD1 << std::endl
                               << "    alpHD2 " << alpHD2 << std::endl
                               << "    betHD1 " << betHD1 << std::endl
                               << "    betHD2 " << betHD2 << std::endl
                               << "     part1 " << part1 << std::endl
                               << "     part2 " << part2 << std::endl;
 
  // private members to set
  theR1 = theParam->r1();
  theR2 = theParam->r2();
  theR3 = theParam->r3();
 
  alpEM = alpEM1 + alpEM2 * aedep;
  tgamEM = tgamma(alpEM);
  betEM = betEM1 - betEM2 * aedep;
  alpHD = alpHD1 + alpHD2 * aedep;
  tgamHD = tgamma(alpHD);
  betHD = betHD1 - betHD2 * aedep;
  part = part1 - part2 * aedep;
  if (part > 1.)
    part = 1.;  // protection - just in case of
 
  if (debug == 2)
    LogInfo("FastCalorimetry") << " HDShower : " << std::endl
                               << "    alpEM " << alpEM << std::endl
                               << "   tgamEM " << tgamEM << std::endl
                               << "    betEM " << betEM << std::endl
                               << "    alpHD " << alpHD << std::endl
                               << "   tgamHD " << tgamHD << std::endl
                               << "    betHD " << betHD << std::endl
                               << "     part " << part << std::endl;
 
  if (onECAL) {
    lambdaEM = theParam->ecalProperties()->interactionLength();
    x0EM = theParam->ecalProperties()->radLenIncm();
  } else {
    lambdaEM = 0.;
    x0EM = 0.;
  }
  lambdaHD = theParam->hcalProperties()->interactionLength();
  x0HD = theParam->hcalProperties()->radLenIncm();
 
  if (debug == 2)
    LogInfo("FastCalorimetry") << " HDShower e " << e << std::endl
                               << "          x0EM = " << x0EM << std::endl
                               << "          x0HD = " << x0HD << std::endl
                               << "         lamEM = " << lambdaEM << std::endl
                               << "         lamHD = " << lambdaHD << std::endl;
 
  // Starting point of the shower
  // try first with ECAL lambda
 
  double sum1 = 0.;  // lambda path from the ECAL/HF entrance;
  double sum2 = 0.;  // lambda path from the interaction point;
  double sum3 = 0.;  // x0     path from the interaction point;
  int nsteps = 0;    // full number of longitudinal steps (counter);
 
  int nmoresteps;  // how many longitudinal steps in addition to
                   // one (if interaction happens there) in ECAL
 
  mip = 1;  // just to initiate particle as MIP in ECAL
 
  if (e < criticalEnergy)
    nmoresteps = 1;
  else
    nmoresteps = nDepthSteps;
 
  depthECAL = 0.;
  depthGAP = 0.;
  depthGAPx0 = 0.;
  if (onECAL) {
    depthECAL = theGrid->ecalTotalL0();  // ECAL depth segment
        //depthECAL  = theGrid->ecalTotalL0() + theGrid->ps1TotalL0() + theGrid->ps2TotalL0() + theGrid->ps2eeTotalL0(); //TEST: include preshower
    depthGAP = theGrid->ecalHcalGapTotalL0();    // GAP  depth segment
    depthGAPx0 = theGrid->ecalHcalGapTotalX0();  // GAP  depth x0
  }
 
  depthHCAL = theGrid->hcalTotalL0();  // HCAL depth segment
  depthToHCAL = depthECAL + depthGAP;
 
  //---------------------------------------------------------------------------
  // Depth simulation & various protections, among them
  // if too deep - get flat random in the allowed region
  // if no HCAL material behind - force to deposit in ECAL
  double maxDepth = depthToHCAL + depthHCAL - 1.1 * depthStep;
  double depthStart = std::log(1. / random->flatShoot());  // starting point lambda unts
  //std::cout<<"generated depth             "<<depthStart<<std::endl;
  if (pmip == 1) {
    depthStart = depthToHCAL;
  } else {
    depthStart = depthStart * 0.9 * depthECAL / std::log(1. / pmip);
  }
  // std::cout<<"modified  depth             "<<depthStart<<std::endl;
 
  if (e < emin) {
    if (debug)
      LogInfo("FastCalorimetry") << " FamosHDShower : e <emin ->  depthStart = 0" << std::endl;
    depthStart = 0.;
  }
 
  if (depthStart > maxDepth) {
    if (debug)
      LogInfo("FastCalorimetry") << " FamosHDShower : depthStart too big ...   = " << depthStart << std::endl;
    depthStart = maxDepth * random->flatShoot();
    if (depthStart < 0.)
      depthStart = 0.;
    if (debug)
      LogInfo("FastCalorimetry") << " FamosHDShower : depthStart re-calculated = " << depthStart << std::endl;
  }
 
  if (onECAL && e < emid) {
    if (depthECAL > depthStep && (depthECAL - depthStart) / depthECAL > 0.2) {
      depthStart = 0.5 * depthECAL * random->flatShoot();
      if (debug)
        LogInfo("FastCalorimetry") << " FamosHDShower : small energy, "
                                   << " depthStart reduced to = " << depthStart << std::endl;
    }
  }
 
  if (depthHCAL < depthStep) {
    if (debug)
      LogInfo("FastCalorimetry") << " FamosHDShower : depthHCAL  too small ... = " << depthHCAL
                                 << " depthStart -> forced to 0 !!!" << std::endl;
    depthStart = 0.;
    nmoresteps = 0;
 
    if (depthECAL < depthStep) {
      nsteps = -1;
      LogInfo("FastCalorimetry") << " FamosHDShower : too small ECAL and HCAL depths - "
                                 << " particle is lost !!! " << std::endl;
    }
  }
 
  if (debug)
    LogInfo("FastCalorimetry") << " FamosHDShower  depths(lam) - " << std::endl
                               << "          ECAL = " << depthECAL << std::endl
                               << "           GAP = " << depthGAP << std::endl
                               << "          HCAL = " << depthHCAL << std::endl
                               << "  starting point = " << depthStart << std::endl;
 
  if (onEcal) {
    if (debug)
      LogInfo("FastCalorimetry") << " FamosHDShower : onECAL" << std::endl;
    if (depthStart < depthECAL) {
      if (debug)
        LogInfo("FastCalorimetry") << " FamosHDShower : depthStart < depthECAL" << std::endl;
      if (depthECAL > depthStep && (depthECAL - depthStart) / depthECAL > 0.1) {
        if (debug)
          LogInfo("FastCalorimetry") << " FamosHDShower : enough space to make ECAL step" << std::endl;
 
        //  ECAL - one step
        nsteps++;
        sum1 += depthECAL;  // at the end of step
        sum2 += depthECAL - depthStart;
        sum3 += sum2 * lambdaEM / x0EM;
        lamtotal.push_back(sum1);
        lamdepth.push_back(sum2);
        lamcurr.push_back(lambdaEM);
        lamstep.push_back(depthECAL - depthStart);
        x0depth.push_back(sum3);
        x0curr.push_back(x0EM);
        detector.push_back(1);
        mip = 0;
 
        if (debug)
          LogInfo("FastCalorimetry") << " FamosHDShower : "
                                     << " in ECAL sum1, sum2 " << sum1 << " " << sum2 << std::endl;
 
        // Gap - no additional step after ECAL
        // just move further to HCAL over the gap
        sum1 += depthGAP;
        sum2 += depthGAP;
        sum3 += depthGAPx0;
      } else {  // Just shift starting point to HCAL
        //  cout << " FamosHDShower : not enough space to make ECAL step" << std::endl;
        if (debug)
          LogInfo("FastCalorimetry") << " FamosHDShower : goto HCAL" << std::endl;
 
        depthStart = depthToHCAL;
        sum1 += depthStart;
      }
    } else {  // GAP or HCAL
      if (depthStart >= depthECAL && depthStart < depthToHCAL) {
        depthStart = depthToHCAL;  // just a shift to HCAL for simplicity
      }
      sum1 += depthStart;
      if (debug)
        LogInfo("FastCalorimetry") << " FamosHDShower : goto HCAL" << std::endl;
    }
  } else {  // Forward
    if (debug)
      LogInfo("FastCalorimetry") << " FamosHDShower : forward" << std::endl;
    sum1 += depthStart;
    transFactor = 0.5;  // makes narower tresverse size of shower
  }
 
  for (int i = 0; i < nmoresteps; i++) {
    sum1 += depthStep;
    if (sum1 > (depthECAL + depthGAP + depthHCAL))
      break;
    sum2 += depthStep;
    sum3 += sum2 * lambdaHD / x0HD;
    lamtotal.push_back(sum1);
    lamdepth.push_back(sum2);
    lamcurr.push_back(lambdaHD);
    lamstep.push_back(depthStep);
    x0depth.push_back(sum3);
    x0curr.push_back(x0HD);
    detector.push_back(3);
    nsteps++;
  }
 
  // Make fractions of energy and transverse radii at each step
 
  if (nsteps > 0) {
    makeSteps(nsteps);
  }
}
 
void HDShower::makeSteps(int nsteps) {
  double sumes = 0.;
  double sum = 0.;
  std::vector<double> temp;
 
  if (debug)
    LogInfo("FastCalorimetry") << " FamosHDShower::makeSteps - "
                               << " nsteps required : " << nsteps << std::endl;
 
  int count = 0;
  for (int i = 0; i < nsteps; i++) {
    double deplam = lamdepth[i] - 0.5 * lamstep[i];
    double depx0 = x0depth[i] - 0.5 * lamstep[i] / x0curr[i];
    double x = betEM * depx0;
    double y = betHD * deplam;
 
    if (debug == 2)
      LogInfo("FastCalorimetry") << " FamosHDShower::makeSteps "
                                 << " - step " << i << "   depx0, x = " << depx0 << ", " << x
                                 << "   deplam, y = " << deplam << ", " << y << std::endl;
 
    double est = (part * betEM * gam(x, alpEM) * lamcurr[i] / (x0curr[i] * tgamEM) +
                  (1. - part) * betHD * gam(y, alpHD) / tgamHD) *
                 lamstep[i];
 
    // protection ...
    if (est < 0.) {
      LogInfo("FastCalorimetry") << "*** FamosHDShower::makeSteps "
                                 << " - negative step energy !!!" << std::endl;
      est = 0.;
      break;
    }
 
    // for estimates only
    sum += est;
    int nPest = (int)(est * e / sum / eSpotSize);
 
    if (debug == 2)
      LogInfo("FastCalorimetry") << " FamosHDShower::makeSteps - nPoints estimate = " << nPest << std::endl;
 
    if (nPest <= 1 && count != 0)
      break;
 
    // good step - to proceed
 
    temp.push_back(est);
    sumes += est;
 
    rlamStep.push_back(transParam * (theR1 + (theR2 - theR3 * aloge)) * deplam * transFactor);
    count++;
  }
 
  // fluctuations in ECAL and re-distribution of remaining energy in HCAL
  if (detector[0] == 1 && count > 1) {
    double oldECALenergy = temp[0];
    double oldHCALenergy = sumes - oldECALenergy;
    double newECALenergy = 2. * sumes;
    for (int i = 0; newECALenergy > sumes && i < infinity; i++)
      newECALenergy = 2. * balanceEH * random->flatShoot() * oldECALenergy;
 
    if (debug == 2)
      LogInfo("FastCalorimetry") << "*** FamosHDShower::makeSteps "
                                 << " ECAL fraction : old/new - " << oldECALenergy / sumes << "/"
                                 << newECALenergy / sumes << std::endl;
 
    temp[0] = newECALenergy;
    double newHCALenergy = sumes - newECALenergy;
    double newHCALreweight = newHCALenergy / oldHCALenergy;
 
    for (int i = 1; i < count; i++) {
      temp[i] *= newHCALreweight;
    }
  }
 
  // final re-normalization of the energy fractions
  for (int i = 0; i < count; i++) {
    eStep.push_back(temp[i] * e / sumes);
    nspots.push_back((int)(eStep[i] / eSpotSize) + 1);
 
    if (debug)
      LogInfo("FastCalorimetry") << " step " << i << "  det: " << detector[i]
                                 << "  xO and lamdepth at the end of step = " << x0depth[i] << " " << lamdepth[i]
                                 << "   Estep func = " << eStep[i] << "   Rstep = " << rlamStep[i]
                                 << "  Nspots = " << nspots[i] << "  espot = " << eStep[i] / (double)nspots[i]
                                 << std::endl;
  }
 
  // The only step is in ECAL - let's make the size bigger ...
  if (count == 1 and detector[0] == 1)
    rlamStep[0] *= 2.;
 
  if (debug) {
    if (eStep[0] > 0.95 * e && detector[0] == 1)
      LogInfo("FastCalorimetry") << " FamosHDShower::makeSteps - "
                                 << "ECAL energy = " << eStep[0] << " out of total = " << e << std::endl;
  }
}
 
bool HDShower::compute() {
  //  TimeMe theT("FamosHDShower::compute");
 
  bool status = false;
  int numLongit = eStep.size();
  if (debug)
    LogInfo("FastCalorimetry") << " FamosHDShower::compute - "
                               << " N_long.steps required : " << numLongit << std::endl;
 
  if (numLongit > 0) {
    status = true;
    // Prepare the trsanverse probability function
    std::vector<double> Fhist;
    std::vector<double> rhist;
    for (int j = 0; j < nTRsteps + 1; j++) {
      rhist.push_back(maxTRfactor * j / nTRsteps);
      Fhist.push_back(transProb(maxTRfactor, 1., rhist[j]));
      if (debug == 3)
        LogInfo("FastCalorimetry") << "indexFinder - i, Fhist[i] = " << j << " " << Fhist[j] << std::endl;
    }
 
    // Longitudinal steps
    for (int i = 0; i < numLongit; i++) {
      double currentDepthL0 = lamtotal[i] - 0.5 * lamstep[i];
      // vary the longitudinal profile if needed
      if (detector[i] != 1)
        currentDepthL0 *= hcalDepthFactor;
      if (debug)
        LogInfo("FastCalorimetry") << " FamosHDShower::compute - detector = " << detector[i]
                                   << "  currentDepthL0 = " << currentDepthL0 << std::endl;
 
      double maxTRsize = maxTRfactor * rlamStep[i];  // in lambda units
      double rbinsize = maxTRsize / nTRsteps;
      double espot = eStep[i] / (double)nspots[i];  // re-adjust espot
 
      if (espot > 2. || espot < 0.)
        LogInfo("FastCalorimetry") << " FamosHDShower::compute - unphysical espot = " << espot << std::endl;
 
      int ecal = 0;
      if (detector[i] != 1) {
        bool setHDdepth = theHcalHitMaker->setDepth(currentDepthL0);
 
        if (debug)
          LogInfo("FastCalorimetry") << " FamosHDShower::compute - status of "
                                     << " theHcalHitMaker->setDepth(currentDepthL0) is " << setHDdepth << std::endl;
 
        if (!setHDdepth) {
          currentDepthL0 -= lamstep[i];
          setHDdepth = theHcalHitMaker->setDepth(currentDepthL0);
        }
 
        if (!setHDdepth)
          continue;
 
        theHcalHitMaker->setSpotEnergy(espot);
 
        //fill hcal longitudinal distribution histogram
      } else {
        ecal = 1;
        bool status = theGrid->getPads(currentDepthL0);
 
        if (debug)
          LogInfo("FastCalorimetry") << " FamosHDShower::compute - status of Grid = " << status << std::endl;
 
        if (!status)
          continue;
 
        int ntry = nspots[i] * 10;
        if (ntry >= infinity) {  // use max allowed in case of too many spots
          nspots[i] = 0.5 * infinity;
          espot *= 0.1 * (double)ntry / double(nspots[i]);
        } else {
          espot *= 0.1;  // fine-grain energy spots in ECAL
                         // to avoid false ECAL clustering
          nspots[i] = ntry;
        }
 
        theGrid->setSpotEnergy(espot);
 
        //fill ecal longitudinal distribution histogram
      }
 
      // Transverse distribition
      int nok = 0;  // counter of OK
      int count = 0;
      int inf = infinity;
      if (lossesOpt)
        inf = nspots[i];  // if losses are enabled, otherwise
      // only OK points are counted ...
      if (nspots[i] > inf)
        std::cout << " FamosHDShower::compute - at long.step " << i << "  too many spots required : " << nspots[i]
                  << " !!! " << std::endl;
 
      for (int j = 0; j < inf; j++) {
        if (nok == nspots[i])
          break;
        count++;
 
        double prob = random->flatShoot();
        int index = indexFinder(prob, Fhist);
        double radius = rlamStep[i] * rhist[index] + random->flatShoot() * rbinsize;  // in-bin
        double phi = 2. * M_PI * random->flatShoot();
 
        if (debug == 2)
          LogInfo("FastCalorimetry") << std::endl
                                     << " FamosHDShower::compute "
                                     << " r = " << radius << "    phi = " << phi << std::endl;
 
        bool result;
        if (ecal) {
          result = theGrid->addHit(radius, phi, 0);
 
          if (debug == 2)
            LogInfo("FastCalorimetry") << " FamosHDShower::compute - "
                                       << " theGrid->addHit result = " << result << std::endl;
 
          //fill ecal transverse distribution histogram
        } else {
          result = theHcalHitMaker->addHit(radius, phi, 0);
 
          if (debug == 2)
            LogInfo("FastCalorimetry") << " FamosHDShower::compute - "
                                       << " theHcalHitMaker->addHit result = " << result << std::endl;
 
          //fill hcal transverse distribution histogram
        }
 
        if (result)
          nok++;
 
      }  // end of tranverse simulation
 
      if (count == infinity) {
        if (debug)
          LogInfo("FastCalorimetry") << " FamosHDShower::compute "
                                     << " maximum number of"
                                     << " transverse points " << count << " is used !!!" << std::endl;
      }
 
      if (debug)
        LogInfo("FastCalorimetry") << " FamosHDShower::compute "
                                   << " long.step No." << i << "   Ntry, Nok = " << count << " " << nok << std::endl;
    }  // end of longitudinal steps
  }    // end of no steps
 
  return status;
}
 
int HDShower::indexFinder(double x, const std::vector<double>& Fhist) {
  // binary search in the vector of doubles
  int size = Fhist.size();
 
  int curr = size / 2;
  int step = size / 4;
  int iter;
  int prevdir = 0;
  int actudir = 0;
 
  for (iter = 0; iter < size; iter++) {
    if (curr >= size || curr < 1)
      LogWarning("FastCalorimetry") << " FamosHDShower::indexFinder - wrong current index = " << curr << " !!!"
                                    << std::endl;
 
    if ((x <= Fhist[curr]) && (x > Fhist[curr - 1]))
      break;
    prevdir = actudir;
    if (x > Fhist[curr]) {
      actudir = 1;
    } else {
      actudir = -1;
    }
    if (prevdir * actudir < 0) {
      if (step > 1)
        step /= 2;
    }
    curr += actudir * step;
    if (curr > size)
      curr = size;
    else {
      if (curr < 1) {
        curr = 1;
      }
    }
 
    if (debug == 3)
      LogInfo("FastCalorimetry") << " indexFinder - end of iter." << iter << " curr, F[curr-1], F[curr] = " << curr
                                 << " " << Fhist[curr - 1] << " " << Fhist[curr] << std::endl;
  }
 
  if (debug == 3)
    LogInfo("FastCalorimetry") << " indexFinder x = " << x << "  found index = " << curr - 1 << std::endl;
 
  return curr - 1;
}