#include <RPCConst.h>

Classes
struct	l1RpcConeCrdnts
	The coordinates of Logic Cone: m_Tower, m_LogSector, m_LogSegment. More...

Public Types
enum	{ ITOW_MIN = 0, ITOW_MAX = 16, IPT_MAX = 31, NSTRIPS = 1152, NSEG = NSTRIPS / 8, OFFSET = 5 }

typedef std::vector< short >	TQualityTab

typedef std::vector< TQualityTab >	TQualityTabsVec

Public Member Functions
std::string	intToString (int number)
	Converts inteager number to string. More...

int	stringToInt (std::string str)
	Converts string to inteager number. If string contains chars, that are not digits, throws RPCException. More...

Static Public Member Functions
static double	etaFromTowerNum (const int atower)

static int	iptFromPt (const double pt)

static double	phiFromLogSegSec (const int logSegment, const int logSector)

static double	phiFromSegmentNum (const int iseg)

static double	ptFromIpt (const int ipt)

static int	segmentNumFromPhi (const double phi)

static int	towerNumFromEta (const double eta)

static double	vxIntegMuRate (int ptCode, double etaFrom, double etaTo)

static double	vxIntegMuRate (int ptCode, int m_tower)

static double	vxMuRate (int ptCode)

Static Public Attributes
static const unsigned int	m_FINAL_OUT_MUONS_CNT
	m_Number of muon candidates return by Final GhostBuster&Sorter More...

static const int	m_FIRST_PLANE = m_LOGPLANE1
	Use ase a first index in loops. More...

static const unsigned int	m_GBETA_OUT_MUONS_CNT
	m_Number of muon candidates return by Trigger Board's eta Ghost Buster More...

static const unsigned int	m_GBPHI_OUT_MUONS_CNT
	m_Number of muon candidates return by Trigger Board's phi Ghost Buster More...

static const int	m_LAST_PLANE = m_LOGPLANE6
	Use ase a last index in loops. More...

static const int	m_LOGPLANE1
	The Logic Planes are named starting from '1', but in varoius loop indeks are from '0', that's why always use these consts. More...

static const int	m_LOGPLANE2 = 1

static const int	m_LOGPLANE3 = 2

static const int	m_LOGPLANE4 = 3

static const int	m_LOGPLANE5 = 4

static const int	m_LOGPLANE6 = 5

static const unsigned int	m_LOGPLANE_SIZE [m_TOWER_COUNT][m_LOGPLANES_COUNT]
	Definition of Logic Cone Sizes - number of Logic m_Strips in each plane. More...

static const std::string	m_LOGPLANE_STR []
	Log Planes names. More...

static const int	m_LOGPLANES_COUNT = 6
	Max Logic Planes Count in trigger towers. More...

static const int	m_NOT_CONECTED
	Denotes Logic m_Strips that is not valid (f.e. in Patterns denotes, that in given plane the pattern is not defined). More...

static const int	m_PT_CODE_MAX = 31
	Pt_code range = 0-m_PT_CODE_MAX. More...

static const int	m_REF_PLANE [m_TOWER_COUNT]
	Definition of Referenece Plane for each m_Tower. More...

static const unsigned int	m_SEGMENTS_IN_SECTOR_CNT
	m_Number of Logic Segments in one Logic Sector, defines also the number of Logic Cones for one Logic Sector of one m_Tower. More...

static const unsigned int	m_TCGB_OUT_MUONS_CNT
	m_Number of muon candidates return by Trigger Crate's Ghost Buster More...

static const int	m_TOWER_COUNT = 16 + 1
	Only half of the detector. More...

static const unsigned int	m_TOWERS_ON_TB_CNT = 4
	Max number of towers covered by one Trugger Board. More...

static const int	m_USED_PLANES_COUNT [m_TOWER_COUNT]
	m_Number of Logic Planes existing in each m_Tower. More...

static const int	m_VLPT_CUT = 7
	Max Pt code of Very Low Pt patterns. More...

static const int	m_VLPT_PLANES_COUNT [m_TOWER_COUNT] = {4, 4, 4, 4, 4, 4, 4, 4, 3, 3, 3, 3, 3, 3, 3, 3, 3}
	m_Number of Logic Planes used for Very Low Pt patterns. More...

Static Private Attributes
static const double	m_etas [RPCConst::ITOW_MAX+2]

static const double	m_pts [RPCConst::IPT_MAX+1]

Detailed Description

Class contains number of L1RpcTrigger specific constanst, and transforming methods (eg. phi <-> segment number) (Should migrate to DDD?)

Author: Marcin Konecki, Warsaw Artur Kalinowski, Warsaw

Definition at line 23 of file RPCConst.h.

Member Typedef Documentation

◆ TQualityTab

typedef std::vector<short> RPCConst::TQualityTab

Definition at line 113 of file RPCConst.h.

◆ TQualityTabsVec

typedef std::vector<TQualityTab> RPCConst::TQualityTabsVec

Definition at line 114 of file RPCConst.h.

Member Enumeration Documentation

◆ anonymous enum

anonymous enum

Enumerator
ITOW_MIN	Minimal number of abs(m_tower_number)
ITOW_MAX	Maximal number of abs(m_tower_number)
IPT_MAX	Max pt bin code.
NSTRIPS	m_Number of Rpc strips in phi direction.
NSEG	m_Number of trigger segments. One segment covers 8 RPC strips in referencial plane (hardware 2 or 6(2')
OFFSET	Offset of the first trigger phi sector [deg].

Definition at line 25 of file RPCConst.h.

        {
     ITOW_MIN = 0,   
     ITOW_MAX = 16,  
     //ITOW_MAX_LOWPT  = 7,      //!< Max m_tower number to which low_pt algorithm is used
     IPT_MAX = 31,        
     NSTRIPS = 1152,      
     NSEG = NSTRIPS / 8,  
     OFFSET = 5           
   };

Member Function Documentation

◆ etaFromTowerNum()

double RPCConst::etaFromTowerNum ( const int atower )

static

Method converts from m_tower number to eta (gives center of m_tower).

Definition at line 42 of file RPCConst.cc.

                                                  {
   int iabsitow = (atower >= 0) ? atower : -atower;
   if (0 == iabsitow)
     return 0.;
   if (iabsitow > RPCConst::ITOW_MAX) {
     //edm::LogError("RPCTrigger") << "**RPCConst::etaFromTowerNum** iabsitow>ITOW_MAX for m_tower:"
     //     << atower ;
     std::string msg = "[RPCConst::etaFromTowerNum] iabsitow>ITOW_MAX for m_tower:";
     std::ostringstream ostr;
     ostr << atower;
     msg += ostr.str();
     throw RPCException(msg);
     return 0.;
   }
   double eta = (m_etas[iabsitow] + m_etas[iabsitow + 1]) / 2.;
   return (atower >= 0) ? eta : -eta;
 }

References PVValHelper::eta, ITOW_MAX, m_etas, mps_check::msg, and AlCaHLTBitMon_QueryRunRegistry::string.

◆ intToString()

std::string RPCConst::intToString ( int number )

Converts inteager number to string.

Definition at line 264 of file RPCConst.cc.

                                           {
   std::string str;
   /* Some problems. AK
   std::ostringstream ostr;
   ostr<<number;
   str = ostr.str();
   edm::LogError("RPCTrigger")<<"std::string intToString(int number)";
   edm::LogError("RPCTrigger")<<str;
   */
   char tmp[20];
   sprintf(tmp, "%d", number);
   str.append(tmp);
   return str;
 }

References contentValuesFiles::number, str, AlCaHLTBitMon_QueryRunRegistry::string, and createJobs::tmp.

Referenced by RPCPacData::getPatternsGroupDescription(), and RPCPacData::insertPatterns().

◆ iptFromPt()

int RPCConst::iptFromPt ( const double pt )

static

Method converts pt [Gev/c] into pt bin number (0, 31).

Definition at line 10 of file RPCConst.cc.

                                        {
   if (pt == 0.)
     return 0;
   if (pt < m_pts[0]) {
     //edm::LogError("RPCTrigger")<<"** RPCConst ** iptFromPt called with illegal pt="<<pt;
     std::string msg = "[RPCConst::iptFromPt] called with illegal pt=";
     std::ostringstream ostr;
     ostr << pt;
     msg += ostr.str();
     throw RPCException(msg);
     return 0;
   }
   int ipt = RPCConst::IPT_MAX;
   while (pt < m_pts[ipt]) {
     ipt--;
   };
   return ipt;
 }

References IPT_MAX, m_pts, mps_check::msg, DiDispStaMuonMonitor_cfi::pt, and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by OMTFProcessor::fillCounts().

◆ phiFromLogSegSec()

double RPCConst::phiFromLogSegSec	(	const int	logSegment,
		const int	logSector
	)

static

Method converts from logSegment (0..11) and logSector(0...11) .

Definition at line 78 of file RPCConst.cc.

                                                                            {
   int iseg = logSegment * 12 + logSector;
   double phi = OFFSET + 2. * m_pi * (iseg) / (double)RPCConst::NSEG;
   return (phi < 2. * m_pi) ? phi : phi - 2. * m_pi;
 }

References m_pi, NSEG, OFFSET, and phi.

◆ phiFromSegmentNum()

double RPCConst::phiFromSegmentNum ( const int iseg )

static

Method converts from segment number (0, 144). obsolete

Definition at line 73 of file RPCConst.cc.

                                                  {
   double phi = OFFSET + 2. * m_pi * (iseg) / (double)RPCConst::NSEG;
   return (phi < 2. * m_pi) ? phi : phi - 2. * m_pi;
 }

References m_pi, NSEG, OFFSET, and phi.

◆ ptFromIpt()

double RPCConst::ptFromIpt ( const int ipt )

static

Method converts pt bin number (0, 31) to pt [GeV/c].

Definition at line 29 of file RPCConst.cc.

                                         {
   if (ipt < 0 || ipt > RPCConst::IPT_MAX) {
     //edm::LogError("RPCTrigger") <<"**RPCConst::ptFromIpt** problem with ipt: "<<ipt;
     std::string msg = "[RPCConst::ptFromIpt] problem with ipt: ";
     std::ostringstream ostr;
     ostr << ipt;
     msg += ostr.str();
     throw RPCException(msg);
     return 0.;
   } else
     return m_pts[ipt];
 }

References IPT_MAX, m_pts, mps_check::msg, and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by OMTFPatternMaker::endJob(), OMTFProcessor::fillCounts(), vxIntegMuRate(), and vxMuRate().

◆ segmentNumFromPhi()

int RPCConst::segmentNumFromPhi ( const double phi )

static

obsolete Method converts phi to segment number (0, 144).

Definition at line 84 of file RPCConst.cc.

                                                 {
   double iphi;
   if (phi - OFFSET < 0) {
     iphi = 2 * m_pi + phi;
   } else {
     iphi = phi - OFFSET;
   }
   int iseg = (int)(iphi * RPCConst::NSEG / (2. * m_pi));
   return iseg;
 }

References createfilelist::int, LEDCalibrationChannels::iphi, m_pi, NSEG, OFFSET, and phi.

◆ stringToInt()

int RPCConst::stringToInt ( std::string str )

Converts string to inteager number. If string contains chars, that are not digits, throws RPCException.

Definition at line 255 of file RPCConst.cc.

                                        {
   for (unsigned int i = 0; i < str.size(); i++)
     if (str[i] < '0' || str[i] > '9')
       throw RPCException("Error in stringToInt(): the string cannot be converted to a number");
   //edm::LogError("RPCTrigger")<< "Error in stringToInt(): the string cannot be converted to a number";
   return atoi(str.c_str());
 }

References mps_fire::i, and str.

Referenced by RPCPatternsParser::startElement().

◆ towerNumFromEta()

int RPCConst::towerNumFromEta ( const double eta )

static

Method converts from eta to trigger m_tower number.

Definition at line 60 of file RPCConst.cc.

                                               {
   int m_tower = 0;
   double abseta = (eta >= 0.) ? eta : -eta;
   while (m_tower <= ITOW_MAX) {
     if (m_etas[m_tower] <= abseta && abseta < m_etas[m_tower + 1])
       break;
     m_tower++;
   }
   if (m_tower > ITOW_MAX)
     m_tower = ITOW_MAX;
   return (eta >= 0) ? m_tower : -m_tower;
 }

References PVValHelper::eta, ITOW_MAX, and m_etas.

Referenced by RPCPhiEff::analyze().

◆ vxIntegMuRate() [1/2]

double RPCConst::vxIntegMuRate	(	int	ptCode,
		double	etaFrom,
		double	etaTo
	)

static

Definition at line 130 of file RPCConst.cc.

                                                                        {
   //calkowanie metoda trapezow - nie do konca dobre
   double rate =
       0.5 * (vxMuRate(ptCode) + vxMuRate(ptCode + 1)) * (RPCConst::ptFromIpt(ptCode + 1) - RPCConst::ptFromIpt(ptCode));
  
   rate = rate * (etaTo - etaFrom);
  
   //edm::LogError("RPCTrigger")<<ptCode<<" "<<rate;//<<<<<<<<<<<<<<<<<<<<<<<<
   return rate;
 }

References ptFromIpt(), RPCpg::rate(), and vxMuRate().

Referenced by vxIntegMuRate().

◆ vxIntegMuRate() [2/2]

double RPCConst::vxIntegMuRate	(	int	ptCode,
		int	m_tower
	)

static

Definition at line 143 of file RPCConst.cc.

                                                       {
   //calkowanie metoda trapezow - nie do konca dobre
   double rate = vxIntegMuRate(ptCode, RPCConst::m_etas[abs(m_tower)], RPCConst::m_etas[abs(m_tower) + 1]);
  
   //edm::LogError("RPCTrigger")<<ptCode<<" "<<rate;//<<<<<<<<<<<<<<<<<<<<<<<<
   return rate;
 }

References funct::abs(), m_etas, RPCpg::rate(), and vxIntegMuRate().

◆ vxMuRate()

double RPCConst::vxMuRate ( int ptCode )

static

Spectrum of muons originating from vertex. See CMS-TN-1995/150

Definition at line 106 of file RPCConst.cc.

                                     {
   double pt_ev = RPCConst::ptFromIpt(ptCode);
   if (pt_ev == 0)
     return 0.0;
   const double lum = 2.0e33;  //defoult is 1.0e34;
   const double dabseta = 1.0;
   const double dpt = 1.0;
   const double afactor = 1.0e-34 * lum * dabseta * dpt;
   const double a = 2 * 1.3084E6;
   const double mu = -0.725;
   const double sigma = 0.4333;
   const double s2 = 2 * sigma * sigma;
  
   double ptlog10;
   ptlog10 = log10(pt_ev);
   double ex = (ptlog10 - mu) * (ptlog10 - mu) / s2;
   double rate = (a * exp(-ex) * afactor);
  
   //edm::LogError("RPCTrigger")<<ptCode<<" "<<rate;//<<<<<<<<<<<<<<<<<<<<<<<<
   return rate;
 }

References a, JetChargeProducer_cfi::exp, amptDefaultParameters_cff::mu, ptFromIpt(), and RPCpg::rate().

Referenced by vxIntegMuRate().

Member Data Documentation

◆ m_etas

const double RPCConst::m_etas

staticprivate

Initial value:

= {

0.00, 0.07, 0.27, 0.44, 0.58, 0.72, 0.83, 0.93, 1.04, 1.14, 1.24, 1.36, 1.48, 1.61, 1.73, 1.85, 1.97, 2.10}

Matrix with approximate upper towers limits. Only positive ones are reported, for negative ones mirror symmetry assumed.

Definition at line 240 of file RPCConst.h.

Referenced by etaFromTowerNum(), towerNumFromEta(), and vxIntegMuRate().

◆ m_FINAL_OUT_MUONS_CNT

const unsigned int RPCConst::m_FINAL_OUT_MUONS_CNT

static

Initial value:

=

4

m_Number of muon candidates return by Final GhostBuster&Sorter

Definition at line 162 of file RPCConst.h.

Referenced by RPCFinalSorter::runFinalSorter(), and RPCHalfSorter::runHalf().

◆ m_FIRST_PLANE

const int RPCConst::m_FIRST_PLANE = m_LOGPLANE1

static

Use ase a first index in loops.

Definition at line 55 of file RPCConst.h.

Referenced by RPCLogCone::getCompressedCone(), RPCLogCone::getFiredPlanesCnt(), RPCLogCone::possibleTrigger(), RPCLogCone::RPCLogCone(), RPCPac::runEnergeticPatternsGroups(), RPCPac::runTrackPatternsGroup(), RPCLogCone::toString(), and TPatternsGroup::updateShape().

◆ m_GBETA_OUT_MUONS_CNT

const unsigned int RPCConst::m_GBETA_OUT_MUONS_CNT

static

Initial value:

=

4

m_Number of muon candidates return by Trigger Board's eta Ghost Buster

Definition at line 158 of file RPCConst.h.

Referenced by RPCTBGhostBuster::gBEta().

◆ m_GBPHI_OUT_MUONS_CNT

const unsigned int RPCConst::m_GBPHI_OUT_MUONS_CNT

static

Initial value:

=

4

m_Number of muon candidates return by Trigger Board's phi Ghost Buster

Definition at line 156 of file RPCConst.h.

Referenced by RPCTBGhostBuster::gBPhi().

◆ m_LAST_PLANE

const int RPCConst::m_LAST_PLANE = m_LOGPLANE6

static

Use ase a last index in loops.

Definition at line 56 of file RPCConst.h.

Referenced by RPCLogCone::toString(), and TPatternsGroup::updateShape().

◆ m_LOGPLANE1

const int RPCConst::m_LOGPLANE1

static

Initial value:

=

0

The Logic Planes are named starting from '1', but in varoius loop indeks are from '0', that's why always use these consts.

Definition at line 47 of file RPCConst.h.

◆ m_LOGPLANE2

const int RPCConst::m_LOGPLANE2 = 1

static

Definition at line 49 of file RPCConst.h.

◆ m_LOGPLANE3

const int RPCConst::m_LOGPLANE3 = 2

static

Definition at line 50 of file RPCConst.h.

◆ m_LOGPLANE4

const int RPCConst::m_LOGPLANE4 = 3

static

Definition at line 51 of file RPCConst.h.

Referenced by RPCLogCone::possibleTrigger().

◆ m_LOGPLANE5

const int RPCConst::m_LOGPLANE5 = 4

static

Definition at line 52 of file RPCConst.h.

◆ m_LOGPLANE6

const int RPCConst::m_LOGPLANE6 = 5

static

Definition at line 53 of file RPCConst.h.

◆ m_LOGPLANE_SIZE

const unsigned int RPCConst::m_LOGPLANE_SIZE

static

Initial value:

= {
    
    {72, 56, 8, 40, 40, 24},  
    {72, 56, 8, 40, 40, 24},  
    {72, 56, 8, 40, 40, 24},  
    {72, 56, 8, 40, 40, 24},  
    {72, 56, 8, 40, 40, 24},  
    {72, 56, 40, 8, 40, 24},  
    {56, 72, 40, 8, 24, 0},   
    {72, 56, 40, 8, 24, 0},   
    {72, 24, 40, 8, 0, 0},    
    {72, 8, 40, 0, 0, 0},     
    {72, 8, 40, 24, 0, 0},    
    {72, 8, 40, 24, 0, 0},    
    {72, 8, 40, 24, 0, 0},    
    {72, 8, 40, 24, 0, 0},    
    {72, 8, 40, 24, 0, 0},    
    {72, 8, 40, 24, 0, 0},    
    {72, 8, 40, 24, 0, 0}     
}

Definition of Logic Cone Sizes - number of Logic m_Strips in each plane.

Definition at line 81 of file RPCConst.h.

Referenced by RPCLogCone::getCompressedCone(), RPCLogCone::RPCLogCone(), and RPCLogCone::toString().

◆ m_LOGPLANE_STR

const std::string RPCConst::m_LOGPLANE_STR

static

Initial value:

= {

"m_LOGPLANE1", "m_LOGPLANE2", "m_LOGPLANE3", "m_LOGPLANE4", "m_LOGPLANE5", "m_LOGPLANE6"}

Log Planes names.

Definition at line 78 of file RPCConst.h.

Referenced by RPCLogCone::toString().

◆ m_LOGPLANES_COUNT

const int RPCConst::m_LOGPLANES_COUNT = 6

static

Max Logic Planes Count in trigger towers.

Definition at line 45 of file RPCConst.h.

Referenced by RPCPacData::insertQualityRecord(), and RPCLogCone::RPCLogCone().

◆ m_NOT_CONECTED

const int RPCConst::m_NOT_CONECTED

static

Initial value:

=

99

Denotes Logic m_Strips that is not valid (f.e. in Patterns denotes, that in given plane the pattern is not defined).

Definition at line 94 of file RPCConst.h.

Referenced by RPCPac::runEnergeticPatternsGroups(), RPCPac::runTrackPatternsGroup(), and TPatternsGroup::updateShape().

◆ m_PT_CODE_MAX

const int RPCConst::m_PT_CODE_MAX = 31

static

Pt_code range = 0-m_PT_CODE_MAX.

Definition at line 43 of file RPCConst.h.

◆ m_pts

const double RPCConst::m_pts

staticprivate

Initial value:

= {
0, 0.01,  
5, 2.0,  2.5, 3.0, 3.5, 4.0, 4.5, 5.,  6.,  7.,  8.,  10., 12.,  14.,  16.,
, 20.,  25., 30., 35., 40., 45., 50., 60., 70., 80., 90., 100., 120., 140.}

Matrix with pt bins upper limits.

Definition at line 236 of file RPCConst.h.

Referenced by iptFromPt(), and ptFromIpt().

◆ m_REF_PLANE

const int RPCConst::m_REF_PLANE

static

Initial value:

= {
    
    m_LOGPLANE3,
    m_LOGPLANE3,
    m_LOGPLANE3,
    m_LOGPLANE3,
    m_LOGPLANE3,
    
    m_LOGPLANE4,
    m_LOGPLANE4,
    m_LOGPLANE4,
    m_LOGPLANE4,
    
    m_LOGPLANE2,
    m_LOGPLANE2,
    m_LOGPLANE2,
    m_LOGPLANE2,
    m_LOGPLANE2,
    m_LOGPLANE2,
    m_LOGPLANE2,
    m_LOGPLANE2}

Definition of Referenece Plane for each m_Tower.

Definition at line 84 of file RPCConst.h.

◆ m_SEGMENTS_IN_SECTOR_CNT

const unsigned int RPCConst::m_SEGMENTS_IN_SECTOR_CNT

static

Initial value:

=

12

m_Number of Logic Segments in one Logic Sector, defines also the number of Logic Cones for one Logic Sector of one m_Tower.

Definition at line 154 of file RPCConst.h.

Referenced by RPCTBGhostBuster::gBPhi(), RPCHalfSorter::runHalf(), and RPCTriggerBoard::runTBGB().

◆ m_TCGB_OUT_MUONS_CNT

const unsigned int RPCConst::m_TCGB_OUT_MUONS_CNT

static

Initial value:

=

4

m_Number of muon candidates return by Trigger Crate's Ghost Buster

Definition at line 160 of file RPCConst.h.

Referenced by RPCTCGhostBusterSorter::run().

◆ m_TOWER_COUNT

const int RPCConst::m_TOWER_COUNT = 16 + 1

static

Only half of the detector.

Definition at line 41 of file RPCConst.h.

Referenced by RPCPacManager< RPCPacData >::init(), and RPCTriggerConfig::produce().

◆ m_TOWERS_ON_TB_CNT

const unsigned int RPCConst::m_TOWERS_ON_TB_CNT = 4

static

Max number of towers covered by one Trugger Board.

Definition at line 153 of file RPCConst.h.

Referenced by RPCTriggerBoard::runTBGB().

◆ m_USED_PLANES_COUNT

const int RPCConst::m_USED_PLANES_COUNT

static

Initial value:

m_Number of Logic Planes existing in each m_Tower.

Definition at line 87 of file RPCConst.h.

Referenced by RPCLogCone::getCompressedCone(), RPCLogCone::getFiredPlanesCnt(), RPCLogCone::possibleTrigger(), RPCLogCone::RPCLogCone(), RPCPac::runEnergeticPatternsGroups(), and RPCPac::runTrackPatternsGroup().

◆ m_VLPT_CUT

const int RPCConst::m_VLPT_CUT = 7

static

Max Pt code of Very Low Pt patterns.

Definition at line 92 of file RPCConst.h.

◆ m_VLPT_PLANES_COUNT

const int RPCConst::m_VLPT_PLANES_COUNT = {4, 4, 4, 4, 4, 4, 4, 4, 3, 3, 3, 3, 3, 3, 3, 3, 3}

static

m_Number of Logic Planes used for Very Low Pt patterns.

Definition at line 90 of file RPCConst.h.

Classes

Public Types

Public Member Functions

Static Public Member Functions

Static Public Attributes

Static Private Attributes

Detailed Description

Member Typedef Documentation

◆ TQualityTab

◆ TQualityTabsVec

Member Enumeration Documentation

◆ anonymous enum

Member Function Documentation

◆ etaFromTowerNum()

◆ intToString()

◆ iptFromPt()

◆ phiFromLogSegSec()

◆ phiFromSegmentNum()

◆ ptFromIpt()

◆ segmentNumFromPhi()

◆ stringToInt()

◆ towerNumFromEta()

◆ vxIntegMuRate() [1/2]

◆ vxIntegMuRate() [2/2]

◆ vxMuRate()

Member Data Documentation

◆ m_etas

◆ m_FINAL_OUT_MUONS_CNT

◆ m_FIRST_PLANE

◆ m_GBETA_OUT_MUONS_CNT

◆ m_GBPHI_OUT_MUONS_CNT

◆ m_LAST_PLANE

◆ m_LOGPLANE1

◆ m_LOGPLANE2

◆ m_LOGPLANE3

◆ m_LOGPLANE4

◆ m_LOGPLANE5

◆ m_LOGPLANE6

◆ m_LOGPLANE_SIZE

◆ m_LOGPLANE_STR

◆ m_LOGPLANES_COUNT

◆ m_NOT_CONECTED

◆ m_PT_CODE_MAX

◆ m_pts

◆ m_REF_PLANE

◆ m_SEGMENTS_IN_SECTOR_CNT

◆ m_TCGB_OUT_MUONS_CNT

◆ m_TOWER_COUNT

◆ m_TOWERS_ON_TB_CNT

◆ m_USED_PLANES_COUNT

◆ m_VLPT_CUT

◆ m_VLPT_PLANES_COUNT