ME0SegmentAlgorithm.cc

Go to the documentation of this file.

 
#include "ME0SegmentAlgorithm.h"
#include "MuonSegFit.h"
 
#include "FWCore/ParameterSet/interface/ParameterSet.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include "DataFormats/GeometryVector/interface/GlobalPoint.h"
#include "DataFormats/Math/interface/deltaPhi.h"
#include "CommonTools/Statistics/interface/ChiSquaredProbability.h"
 
#include <algorithm>
#include <cmath>
#include <iostream>
#include <string>
 
/* Constructor
 *
 */
ME0SegmentAlgorithm::ME0SegmentAlgorithm(const edm::ParameterSet& ps)
    : ME0SegmentAlgorithmBase(ps), myName("ME0SegmentAlgorithm") {
  debug = ps.getUntrackedParameter<bool>("ME0Debug");
  minHitsPerSegment = ps.getParameter<unsigned int>("minHitsPerSegment");
  preClustering = ps.getParameter<bool>("preClustering");
  dXclusBoxMax = ps.getParameter<double>("dXclusBoxMax");
  dYclusBoxMax = ps.getParameter<double>("dYclusBoxMax");
  preClustering_useChaining = ps.getParameter<bool>("preClusteringUseChaining");
  dPhiChainBoxMax = ps.getParameter<double>("dPhiChainBoxMax");
  dEtaChainBoxMax = ps.getParameter<double>("dEtaChainBoxMax");
  dTimeChainBoxMax = ps.getParameter<double>("dTimeChainBoxMax");
  maxRecHitsInCluster = ps.getParameter<int>("maxRecHitsInCluster");
 
  edm::LogVerbatim("ME0SegmentAlgorithm")
      << "[ME0SegmentAlgorithm::ctor] Parameters to build segments :: "
      << "preClustering = " << preClustering << " preClustering_useChaining = " << preClustering_useChaining
      << " dPhiChainBoxMax = " << dPhiChainBoxMax << " dEtaChainBoxMax = " << dEtaChainBoxMax
      << " dTimeChainBoxMax = " << dTimeChainBoxMax << " minHitsPerSegment = " << minHitsPerSegment
      << " maxRecHitsInCluster = " << maxRecHitsInCluster;
}
 
/* Destructor
 *
 */
ME0SegmentAlgorithm::~ME0SegmentAlgorithm() {}
 
std::vector<ME0Segment> ME0SegmentAlgorithm::run(const ME0Chamber* chamber, const HitAndPositionContainer& rechits) {
#ifdef EDM_ML_DEBUG  // have lines below only compiled when in debug mode
  ME0DetId chId(chamber->id());
  edm::LogVerbatim("ME0SegAlgoMM") << "[ME0SegmentAlgorithm::run] build segments in chamber " << chId
                                   << " which contains " << rechits.size() << " rechits";
  for (auto rh = rechits.begin(); rh != rechits.end(); ++rh) {
    auto me0id = rh->rh->me0Id();
    auto rhLP = rh->lp;
    edm::LogVerbatim("ME0SegmentAlgorithm")
        << "[RecHit :: Loc x = " << std::showpos << std::setw(9) << rhLP.x() << " Loc y = " << std::showpos
        << std::setw(9) << rhLP.y() << " Time = " << std::showpos << rh->rh->tof() << " -- " << me0id.rawId() << " = "
        << me0id << " ]";
  }
#endif
 
  // pre-cluster rechits and loop over all sub clusters separately
  std::vector<ME0Segment> segments_temp;
  std::vector<ME0Segment> segments;
  ProtoSegments rechits_clusters;  // this is a collection of groups of rechits
 
  if (preClustering) {
    // run a pre-clusterer on the given rechits to split obviously separated segment seeds:
    if (preClustering_useChaining) {
      // it uses X,Y,Z information; there are no configurable parameters used;
      // the X, Y, Z "cuts" are just (much) wider than reasonable high pt segments
      rechits_clusters = this->chainHits(chamber, rechits);
    } else {
      // it uses X,Y information + configurable parameters
      rechits_clusters = this->clusterHits(rechits);
    }
    // loop over the found clusters:
    for (auto sub_rechits = rechits_clusters.begin(); sub_rechits != rechits_clusters.end(); ++sub_rechits) {
      // clear the buffer for the subset of segments:
      segments_temp.clear();
      // build the subset of segments:
      this->buildSegments(chamber, (*sub_rechits), segments_temp);
      // add the found subset of segments to the collection of all segments in this chamber:
      segments.insert(segments.end(), segments_temp.begin(), segments_temp.end());
    }
    return segments;
  } else {
    HitAndPositionPtrContainer ptrRH;
    ptrRH.reserve(rechits.size());
    for (const auto& rh : rechits)
      ptrRH.push_back(&rh);
    this->buildSegments(chamber, ptrRH, segments);
    return segments;
  }
}
 
// ********************************************************************;
ME0SegmentAlgorithm::ProtoSegments ME0SegmentAlgorithm::clusterHits(const HitAndPositionContainer& rechits) {
  ProtoSegments rechits_clusters;  // this is a collection of groups of rechits
 
  float dXclus_box = 0.0;
  float dYclus_box = 0.0;
 
  ProtoSegments seeds;
  seeds.reserve(rechits.size());
 
  std::vector<float> running_meanX;
  running_meanX.reserve(rechits.size());
  std::vector<float> running_meanY;
  running_meanY.reserve(rechits.size());
 
  std::vector<float> seed_minX;
  seed_minX.reserve(rechits.size());
  std::vector<float> seed_maxX;
  seed_maxX.reserve(rechits.size());
  std::vector<float> seed_minY;
  seed_minY.reserve(rechits.size());
  std::vector<float> seed_maxY;
  seed_maxY.reserve(rechits.size());
 
  // split rechits into subvectors and return vector of vectors:
  // Loop over rechits
  // Create one seed per hit
  for (unsigned int i = 0; i < rechits.size(); ++i) {
    seeds.push_back(HitAndPositionPtrContainer(1, &rechits[i]));
 
    // First added hit in seed defines the mean to which the next hit is compared
    // for this seed.
 
    running_meanX.push_back(rechits[i].lp.x());
    running_meanY.push_back(rechits[i].lp.y());
 
    // set min/max X and Y for box containing the hits in the precluster:
    seed_minX.push_back(rechits[i].lp.x());
    seed_maxX.push_back(rechits[i].lp.x());
    seed_minY.push_back(rechits[i].lp.y());
    seed_maxY.push_back(rechits[i].lp.y());
  }
 
  // merge clusters that are too close
  // measure distance between final "running mean"
  for (size_t NNN = 0; NNN < seeds.size(); ++NNN) {
    for (size_t MMM = NNN + 1; MMM < seeds.size(); ++MMM) {
      if (running_meanX[MMM] == running_max || running_meanX[NNN] == running_max) {
        LogDebug("ME0SegmentAlgorithm") << "[ME0SegmentAlgorithm::clusterHits]: ALARM! Skipping used seeds, this "
                                           "should not happen - inform developers!";
        continue;  //skip seeds that have been used
      }
 
      // calculate cut criteria for simple running mean distance cut:
      //dXclus = fabs(running_meanX[NNN] - running_meanX[MMM]);
      //dYclus = fabs(running_meanY[NNN] - running_meanY[MMM]);
      // calculate minmal distance between precluster boxes containing the hits:
      if (running_meanX[NNN] > running_meanX[MMM])
        dXclus_box = seed_minX[NNN] - seed_maxX[MMM];
      else
        dXclus_box = seed_minX[MMM] - seed_maxX[NNN];
      if (running_meanY[NNN] > running_meanY[MMM])
        dYclus_box = seed_minY[NNN] - seed_maxY[MMM];
      else
        dYclus_box = seed_minY[MMM] - seed_maxY[NNN];
 
      if (dXclus_box < dXclusBoxMax && dYclus_box < dYclusBoxMax) {
        // merge clusters!
        // merge by adding seed NNN to seed MMM and erasing seed NNN
 
        // calculate running mean for the merged seed:
        if (seeds[NNN].size() + seeds[MMM].size() != 0) {
          running_meanX[MMM] = (running_meanX[NNN] * seeds[NNN].size() + running_meanX[MMM] * seeds[MMM].size()) /
                               (seeds[NNN].size() + seeds[MMM].size());
          running_meanY[MMM] = (running_meanY[NNN] * seeds[NNN].size() + running_meanY[MMM] * seeds[MMM].size()) /
                               (seeds[NNN].size() + seeds[MMM].size());
        }
 
        // update min/max X and Y for box containing the hits in the merged cluster:
        if (seed_minX[NNN] < seed_minX[MMM])
          seed_minX[MMM] = seed_minX[NNN];
        if (seed_maxX[NNN] > seed_maxX[MMM])
          seed_maxX[MMM] = seed_maxX[NNN];
        if (seed_minY[NNN] < seed_minY[MMM])
          seed_minY[MMM] = seed_minY[NNN];
        if (seed_maxY[NNN] > seed_maxY[MMM])
          seed_maxY[MMM] = seed_maxY[NNN];
 
        // add seed NNN to MMM (lower to larger number)
        seeds[MMM].insert(seeds[MMM].end(), seeds[NNN].begin(), seeds[NNN].end());
 
        // mark seed NNN as used (at the moment just set running mean to 999999.)
        running_meanX[NNN] = running_max;
        running_meanY[NNN] = running_max;
        // we have merged a seed (NNN) to the highter seed (MMM) - need to contimue to
        // next seed (NNN+1)
        break;
      }
    }
  }
 
  // hand over the final seeds to the output
  // would be more elegant if we could do the above step with
  // erasing the merged ones, rather than the
  for (size_t NNN = 0; NNN < seeds.size(); ++NNN) {
    if (running_meanX[NNN] == running_max)
      continue;  //skip seeds that have been marked as used up in merging
    rechits_clusters.push_back(seeds[NNN]);
  }
 
  return rechits_clusters;
}
 
ME0SegmentAlgorithm::ProtoSegments ME0SegmentAlgorithm::chainHits(const ME0Chamber* chamber,
                                                                  const HitAndPositionContainer& rechits) {
  ProtoSegments rechits_chains;
  ProtoSegments seeds;
  seeds.reserve(rechits.size());
  std::vector<bool> usedCluster(rechits.size(), false);
 
  // split rechits into subvectors and return vector of vectors:
  // Loop over rechits
  // Create one seed per hit
  for (unsigned int i = 0; i < rechits.size(); ++i) {
    if (std::abs(rechits[i].rh->tof()) > dTimeChainBoxMax)
      continue;
    seeds.push_back(HitAndPositionPtrContainer(1, &rechits[i]));
  }
 
  // merge chains that are too close ("touch" each other)
  for (size_t NNN = 0; NNN < seeds.size(); ++NNN) {
    for (size_t MMM = NNN + 1; MMM < seeds.size(); ++MMM) {
      if (usedCluster[MMM] || usedCluster[NNN]) {
        continue;
      }
      // all is in the way we define "good";
      // try not to "cluster" the hits but to "chain" them;
      // it does the clustering but also does a better job
      // for inclined tracks (not clustering them together;
      // crossed tracks would be still clustered together)
      // 22.12.09: In fact it is not much more different
      // than the "clustering", we just introduce another
      // variable in the game - Z. And it makes sense
      // to re-introduce Y (or actually wire group mumber)
      // in a similar way as for the strip number - see
      // the code below.
      bool goodToMerge = isGoodToMerge(chamber, seeds[NNN], seeds[MMM]);
      if (goodToMerge) {
        // merge chains!
        // merge by adding seed NNN to seed MMM and erasing seed NNN
 
        // add seed NNN to MMM (lower to larger number)
        seeds[MMM].insert(seeds[MMM].end(), seeds[NNN].begin(), seeds[NNN].end());
 
        // mark seed NNN as used
        usedCluster[NNN] = true;
        // we have merged a seed (NNN) to the highter seed (MMM) - need to contimue to
        // next seed (NNN+1)
        break;
      }
    }
  }
 
  // hand over the final seeds to the output
  // would be more elegant if we could do the above step with
  // erasing the merged ones, rather than the
 
  for (size_t NNN = 0; NNN < seeds.size(); ++NNN) {
    if (usedCluster[NNN])
      continue;  //skip seeds that have been marked as used up in merging
    rechits_chains.push_back(seeds[NNN]);
  }
 
  //***************************************************************
 
  return rechits_chains;
}
 
bool ME0SegmentAlgorithm::isGoodToMerge(const ME0Chamber* chamber,
                                        const HitAndPositionPtrContainer& newChain,
                                        const HitAndPositionPtrContainer& oldChain) {
  for (size_t iRH_new = 0; iRH_new < newChain.size(); ++iRH_new) {
    GlobalPoint pos_new = newChain[iRH_new]->gp;
 
    for (size_t iRH_old = 0; iRH_old < oldChain.size(); ++iRH_old) {
      GlobalPoint pos_old = oldChain[iRH_old]->gp;
      // to be chained, two hits need to be in neighbouring layers...
      // or better allow few missing layers (upto 3 to avoid inefficiencies);
      // however we'll not make an angle correction because it
      // worsen the situation in some of the "regular" cases
      // (not making the correction means that the conditions for
      // forming a cluster are different if we have missing layers -
      // this could affect events at the boundaries )
 
      // to be chained, two hits need also to be "close" in phi and eta
      if (std::abs(reco::deltaPhi(float(pos_new.phi()), float(pos_old.phi()))) >= dPhiChainBoxMax)
        continue;
      if (std::abs(pos_new.eta() - pos_old.eta()) >= dEtaChainBoxMax)
        continue;
      // and the difference in layer index should be < (nlayers-1)
      if (std::abs(int(newChain[iRH_new]->layer) - int(oldChain[iRH_old]->layer)) >= (chamber->id().nlayers() - 1))
        continue;
      // and they should have a time difference compatible with the hypothesis
      // that the rechits originate from the same particle, but were detected in different layers
      if (std::abs(newChain[iRH_new]->rh->tof() - oldChain[iRH_old]->rh->tof()) >= dTimeChainBoxMax)
        continue;
 
      return true;
    }
  }
  return false;
}
 
void ME0SegmentAlgorithm::buildSegments(const ME0Chamber* chamber,
                                        const HitAndPositionPtrContainer& rechits,
                                        std::vector<ME0Segment>& me0segs) {
  if (rechits.size() < minHitsPerSegment)
    return;
 
#ifdef EDM_ML_DEBUG  // have lines below only compiled when in debug mode
  edm::LogVerbatim("ME0SegmentAlgorithm")
      << "[ME0SegmentAlgorithm::buildSegments] will now try to fit a ME0Segment from collection of " << rechits.size()
      << " ME0 RecHits";
  for (auto rh = rechits.begin(); rh != rechits.end(); ++rh) {
    auto me0id = (*rh)->rh->me0Id();
    auto rhLP = (*rh)->lp;
    edm::LogVerbatim("ME0SegmentAlgorithm")
        << "[RecHit :: Loc x = " << std::showpos << std::setw(9) << rhLP.x() << " Loc y = " << std::showpos
        << std::setw(9) << rhLP.y() << " Time = " << std::showpos << (*rh)->rh->tof() << " -- " << me0id.rawId()
        << " = " << me0id << " ]";
  }
#endif
 
  MuonSegFit::MuonRecHitContainer muonRecHits;
  std::vector<const ME0RecHit*> bareRHs;
 
  // select hits from the ensemble and sort it
  for (auto rh = rechits.begin(); rh != rechits.end(); rh++) {
    bareRHs.push_back((*rh)->rh);
    // for segFit - using local point in chamber frame
    ME0RecHit* newRH = (*rh)->rh->clone();
    newRH->setPosition((*rh)->lp);
 
    MuonSegFit::MuonRecHitPtr trkRecHit(newRH);
    muonRecHits.push_back(trkRecHit);
  }
 
  // The actual fit on all hits of the vector of the selected Tracking RecHits:
  sfit_ = std::make_unique<MuonSegFit>(muonRecHits);
  bool goodfit = sfit_->fit();
  edm::LogVerbatim("ME0SegmentAlgorithm") << "[ME0SegmentAlgorithm::buildSegments] ME0Segment fit done";
 
  // quit function if fit was not OK
  if (!goodfit) {
    for (auto rh : muonRecHits)
      rh.reset();
    return;
  }
 
  // obtain all information necessary to make the segment:
  LocalPoint protoIntercept = sfit_->intercept();
  LocalVector protoDirection = sfit_->localdir();
  AlgebraicSymMatrix protoErrors = sfit_->covarianceMatrix();
  double protoChi2 = sfit_->chi2();
  // Calculate the central value and uncertainty of the segment time
  float averageTime = 0.;
  for (auto rh = rechits.begin(); rh != rechits.end(); ++rh) {
    averageTime += (*rh)->rh->tof();
  }
  if (!rechits.empty())
    averageTime = averageTime / (rechits.size());
  float timeUncrt = 0.;
  for (auto rh = rechits.begin(); rh != rechits.end(); ++rh) {
    timeUncrt += pow((*rh)->rh->tof() - averageTime, 2);
  }
 
  if (rechits.size() > 1)
    timeUncrt = timeUncrt / (rechits.size() - 1);
  timeUncrt = sqrt(timeUncrt);
 
  const float dPhi = chamber->computeDeltaPhi(protoIntercept, protoDirection);
 
  // save all information inside GEMCSCSegment
  edm::LogVerbatim("ME0SegmentAlgorithm")
      << "[ME0SegmentAlgorithm::buildSegments] will now try to make ME0Segment from collection of " << rechits.size()
      << " ME0 RecHits";
  ME0Segment tmp(bareRHs, protoIntercept, protoDirection, protoErrors, protoChi2, averageTime, timeUncrt, dPhi);
 
  edm::LogVerbatim("ME0SegmentAlgorithm") << "[ME0SegmentAlgorithm::buildSegments] ME0Segment made";
  edm::LogVerbatim("ME0SegmentAlgorithm") << "[ME0SegmentAlgorithm::buildSegments] " << tmp;
 
  for (auto rh : muonRecHits)
    rh.reset();
  me0segs.push_back(tmp);
  return;
}