CMSDAS11DijetAnalyzer.cc

Go to the documentation of this file.

// CMSDAS11DijetAnalyzer.cc
// Description: A basic dijet analyzer for the CMSDAS 2011
// Author: John Paul Chou
// Date: January 12, 2011
 
#include "RecoJets/JetAnalyzers/interface/CMSDAS11DijetAnalyzer.h"
 
#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include "FWCore/Framework/interface/MakerMacros.h"
#include "FWCore/ServiceRegistry/interface/Service.h"
#include "CommonTools/UtilAlgos/interface/TFileService.h"
 
#include "DataFormats/VertexReco/interface/Vertex.h"
#include "JetMETCorrections/Objects/interface/JetCorrector.h"
#include "SimDataFormats/GeneratorProducts/interface/GenEventInfoProduct.h"
#include "SimDataFormats/GeneratorProducts/interface/GenRunInfoProduct.h"
 
#include <TH1D.h>
 
CMSDAS11DijetAnalyzer::CMSDAS11DijetAnalyzer(edm::ParameterSet const& params)
    : edm::EDAnalyzer(),
      jetSrc(params.getParameter<edm::InputTag>("jetSrc")),
      vertexSrc(params.getParameter<edm::InputTag>("vertexSrc")),
      jetCorrections(params.getParameter<std::string>("jetCorrections")),
      innerDeltaEta(params.getParameter<double>("innerDeltaEta")),
      outerDeltaEta(params.getParameter<double>("outerDeltaEta")),
      JESbias(params.getParameter<double>("JESbias")) {
  // setup file service
  edm::Service<TFileService> fs;
 
  const int NBINS = 36;
  Double_t BOUNDARIES[NBINS] = {220,  244,  270,  296,  325,  354,  386,  419,  453,  489,  526,  565,
                                606,  649,  693,  740,  788,  838,  890,  944,  1000, 1058, 1118, 1181,
                                1246, 1313, 1383, 1455, 1530, 1607, 1687, 1770, 1856, 1945, 2037, 2132};
 
  // setup histograms
  hVertexZ = fs->make<TH1D>("hVertexZ", "Z position of the Vertex", 50, -20, 20);
  hJetRawPt = fs->make<TH1D>("hJetRawPt", "Raw Jet Pt", 50, 0, 1000);
  hJetCorrPt = fs->make<TH1D>("hJetCorrPt", "Corrected Jet Pt", 50, 0, 1000);
  hJet1Pt = fs->make<TH1D>("hJet1Pt", "Corrected Jet1 Pt", 50, 0, 1000);
  hJet2Pt = fs->make<TH1D>("hJet2Pt", "Corrected Jet2 Pt", 50, 0, 1000);
 
  hJetEta = fs->make<TH1D>("hJetEta", "Corrected Jet Eta", 10, -5, 5);
  hJet1Eta = fs->make<TH1D>("hJet1Eta", "Corrected Jet1 Eta", 10, -5, 5);
  hJet2Eta = fs->make<TH1D>("hJet2Eta", "Corrected Jet2 Eta", 10, -5, 5);
 
  hJetPhi = fs->make<TH1D>("hJetPhi", "Corrected Jet Phi", 10, -3.1415, 3.1415);
  hJet1Phi = fs->make<TH1D>("hJet1Phi", "Corrected Jet1 Phi", 10, -3.1415, 3.1415);
  hJet2Phi = fs->make<TH1D>("hJet2Phi", "Corrected Jet2 Phi", 10, -3.1415, 3.1415);
 
  hJetEMF = fs->make<TH1D>("hJetEMF", "EM Fraction of Jets", 50, 0, 1);
  hJet1EMF = fs->make<TH1D>("hJet1EMF", "EM Fraction of Jet1", 50, 0, 1);
  hJet2EMF = fs->make<TH1D>("hJet2EMF", "EM Fraction of Jet2", 50, 0, 1);
 
  hCorDijetMass = fs->make<TH1D>("hCorDijetMass", "Corrected Dijet Mass", NBINS - 1, BOUNDARIES);
  hDijetDeltaPhi = fs->make<TH1D>("hDijetDeltaPhi", "Dijet |#Delta #phi|", 50, 0, 3.1415);
  hDijetDeltaEta = fs->make<TH1D>("hDijetDeltaEta", "Dijet |#Delta #eta|", 50, 0, 6);
 
  hInnerDijetMass = fs->make<TH1D>("hInnerDijetMass", "Corrected Inner Dijet Mass", NBINS - 1, BOUNDARIES);
  hOuterDijetMass = fs->make<TH1D>("hOuterDijetMass", "Corrected Outer Dijet Mass", NBINS - 1, BOUNDARIES);
}
 
void CMSDAS11DijetAnalyzer::endJob(void) {}
 
void CMSDAS11DijetAnalyzer::analyze(const edm::Event& iEvent, const edm::EventSetup& iSetup) {
  double mWeight;
  edm::Handle<GenEventInfoProduct> hEventInfo;
  iEvent.getByLabel("generator", hEventInfo);
  if (hEventInfo.isValid())
    mWeight = hEventInfo->weight();
  else
    mWeight = 1.;
 
  // Get event ID information
  //int nrun=iEvent.id().run();
  //int nlumi=iEvent.luminosityBlock();
  //int nevent=iEvent.id().event();
 
  // Get Primary Vertex Information
 
  // magic to get the vertices from EDM
  edm::Handle<std::vector<reco::Vertex> > vertices_h;
  iEvent.getByLabel(vertexSrc, vertices_h);
  if (!vertices_h.isValid()) {
    std::cout << "Didja hear the one about the empty vertex collection?\n";
    return;
  }
 
  // require in the event that there is at least one reconstructed vertex
  if (vertices_h->empty())
    return;
 
  // pick the first (i.e. highest sum pt) verte
  const reco::Vertex* theVertex = &(vertices_h->front());
 
  // require that the vertex meets certain criteria
  if (theVertex->ndof() < 5)
    return;
  if (fabs(theVertex->z()) > 24.0)
    return;
  if (fabs(theVertex->position().rho()) > 2.0)
    return;
 
  // Get Jet Information
 
  // magic to get the jets from EDM
  edm::Handle<reco::CaloJetCollection> jets_h;
  iEvent.getByLabel(jetSrc, jets_h);
  if (!jets_h.isValid()) {
    std::cout << "Didja hear the one about the empty jet collection?\n";
    return;
  }
 
  // magic to get the jet energy corrections
  const JetCorrector* corrector = JetCorrector::getJetCorrector(jetCorrections, iSetup);
 
  // collection of selected jets
  std::vector<reco::CaloJet> selectedJets;
 
  // loop over the jet collection
  for (reco::CaloJetCollection::const_iterator j_it = jets_h->begin(); j_it != jets_h->end(); j_it++) {
    reco::CaloJet jet = *j_it;
 
    // calculate and apply the correction
    double scale = corrector->correction(jet.p4());
 
    // Introduce a purposeful bias to the correction, to show what happens
    scale *= JESbias;
 
    // fill the histograms
    hJetRawPt->Fill(jet.pt(), mWeight);
    hJetEta->Fill(jet.eta(), mWeight);
    hJetPhi->Fill(jet.phi(), mWeight);
    hJetEMF->Fill(jet.emEnergyFraction(), mWeight);
 
    // correct the jet energy
    jet.scaleEnergy(scale);
 
    // now fill the correct jet pt after the correction
    hJetCorrPt->Fill(jet.pt(), mWeight);
 
    // put the selected jets into a collection
    selectedJets.push_back(jet);
  }
 
  // require at least two jets to continue
  if (selectedJets.size() < 2)
    return;
 
  //sort by corrected pt (not the same order as raw pt, sometimes)
  sort(selectedJets.begin(), selectedJets.end(), compare_JetPt);
 
  // select high pt, central, non-noise-like jets
  if (selectedJets[0].pt() < 50.0)
    return;
  if (fabs(selectedJets[0].eta()) > 2.5)
    return;
  if (selectedJets[0].emEnergyFraction() < 0.01)
    return;
  if (selectedJets[1].pt() < 50.0)
    return;
  if (fabs(selectedJets[1].eta()) > 2.5)
    return;
  if (selectedJets[1].emEnergyFraction() < 0.01)
    return;
 
  // fill histograms for the jets in our dijets, only
  hJet1Pt->Fill(selectedJets[0].pt(), mWeight);
  hJet1Eta->Fill(selectedJets[0].eta(), mWeight);
  hJet1Phi->Fill(selectedJets[0].phi(), mWeight);
  hJet1EMF->Fill(selectedJets[0].emEnergyFraction(), mWeight);
  hJet2Pt->Fill(selectedJets[1].pt(), mWeight);
  hJet2Eta->Fill(selectedJets[1].eta(), mWeight);
  hJet2Phi->Fill(selectedJets[1].phi(), mWeight);
  hJet2EMF->Fill(selectedJets[1].emEnergyFraction(), mWeight);
 
  //Get the mass of the two leading jets.  Needs their 4-vectors...
  double corMass = (selectedJets[0].p4() + selectedJets[1].p4()).M();
  double deltaEta = fabs(selectedJets[0].eta() - selectedJets[1].eta());
  if (corMass < 489)
    return;
  if (deltaEta > 1.3)
    return;
  hCorDijetMass->Fill(corMass, mWeight);
  hDijetDeltaPhi->Fill(fabs(selectedJets[0].phi() - selectedJets[1].phi()), mWeight);
  hDijetDeltaEta->Fill(deltaEta, mWeight);
 
  //Fill the inner and outer dijet mass spectra, to make the ratio from
  if (deltaEta < innerDeltaEta)
    hInnerDijetMass->Fill(corMass, mWeight);
  else if (deltaEta < outerDeltaEta)
    hOuterDijetMass->Fill(corMass, mWeight);
 
  hVertexZ->Fill(theVertex->z(), mWeight);
  return;
}
 
DEFINE_FWK_MODULE(CMSDAS11DijetAnalyzer);