SurveyResidual.cc

Go to the documentation of this file.

#include "Alignment/CommonAlignment/interface/Alignable.h"
#include "Alignment/CommonAlignment/interface/AlignmentParameters.h"
#include "Alignment/CommonAlignment/interface/SurveyDet.h"
#include "DataFormats/Math/interface/Matrix.h"
#include "FWCore/Utilities/interface/Exception.h"
 
#include "Alignment/CommonAlignment/interface/SurveyResidual.h"
 
using namespace align;
 
SurveyResidual::SurveyResidual(const Alignable& ali, StructureType type, bool bias)
    : theMother(nullptr), theSurface(ali.surface()), theSelector(ali.alignmentParameters()->selector()) {
  // Find mother matching given type
 
  theMother = &ali;  // start finding from this alignable
 
  while (theMother->alignableObjectId() != type) {
    theMother = theMother->mother();  // move up a level
 
    if (!theMother)
      return;
    //     {
    //       throw cms::Exception("ConfigError")
    //  << "Alignable (id = " << ali.geomDetId().rawId()
    //  << ") does not belong to a composite of type " << type;
    //     }
  }
 
  if (!theMother->mother()) {
    throw cms::Exception("ConfigError") << "The type " << type << " does not have a survey residual defined!\n"
                                        << "You have probably set the highest hierarchy. Choose a lower level.";
  }
 
  findSisters(theMother, bias);
 
  if (theSisters.empty()) {
    throw cms::Exception("ConfigError") << "You are finding an unbiased residual of an alignable "
                                        << " (id = " << ali.geomDetId().rawId() << ") which has no sister. Abort!";
  }
 
  calculate(ali);
}
 
AlgebraicVector SurveyResidual::sensorResidual() const {
  std::vector<Scalar> pars;  // selected parameters
 
  pars.reserve(AlignParams::kSize);
 
  // Find linear displacements.
 
  align::LocalVector deltaR = theSurface.toLocal(theCurrentVs[0] - theNominalVs[0]);
 
  if (theSelector[0])
    pars.push_back(deltaR.x());
  if (theSelector[1])
    pars.push_back(deltaR.y());
  if (theSelector[2])
    pars.push_back(deltaR.z());
 
  // Match the centers of current and nominal surfaces to find the angular
  // displacements about the center. Only do this if angular dof are selected.
 
  if (theSelector[3] || theSelector[4] || theSelector[5]) {
    GlobalVectors nominalVs = theNominalVs;
    GlobalVectors currentVs = theCurrentVs;
 
    for (unsigned int j = 0; j < nominalVs.size(); ++j) {
      nominalVs[j] -= theNominalVs[0];  // move to nominal pos
      currentVs[j] -= theCurrentVs[0];  // move to current pos
    }
 
    RotationType rot = diffRot(nominalVs, currentVs);  // frame rotation
 
    EulerAngles deltaW = toAngles(theSurface.toLocal(rot));
 
    if (theSelector[3])
      pars.push_back(deltaW(1));
    if (theSelector[4])
      pars.push_back(deltaW(2));
    if (theSelector[5])
      pars.push_back(deltaW(3));
  }
 
  AlgebraicVector deltaRW(pars.size());  // (deltaR, deltaW)
 
  for (unsigned int j = 0; j < pars.size(); ++j)
    deltaRW(j + 1) = pars[j];
 
  return deltaRW;
}
 
LocalVectors SurveyResidual::pointsResidual() const {
  LocalVectors residuals;
 
  unsigned int nPoint = theNominalVs.size();
 
  residuals.reserve(nPoint);
 
  for (unsigned int j = 0; j < nPoint; ++j) {
    residuals.push_back(theSurface.toLocal(theCurrentVs[j] - theNominalVs[j]));
  }
 
  return residuals;
}
 
AlgebraicSymMatrix SurveyResidual::inverseCovariance() const {
  if (theSelector.size() != ErrorMatrix::kRows) {
    throw cms::Exception("LogicError") << "Mismatched number of dof between ErrorMatrix and Selector.";
  }
 
  std::vector<unsigned int> indices;  // selected indices
 
  indices.reserve(ErrorMatrix::kRows);
 
  for (unsigned int i = 0; i < ErrorMatrix::kRows; ++i)
    if (theSelector[i])
      indices.push_back(i);
 
  AlgebraicSymMatrix invCov(indices.size());
 
  for (unsigned int i = 0; i < indices.size(); ++i)
    for (unsigned int j = 0; j <= i; ++j)
      invCov.fast(i + 1, j + 1) = theCovariance(indices[i], indices[j]);
 
  int fail(0);
  invCov.invert(fail);
 
  if (fail) {
    throw cms::Exception("ConfigError") << "Cannot invert survey error " << invCov;
  }
 
  return invCov;
}
 
void SurveyResidual::findSisters(const Alignable* ali, bool bias) {
  theSisters.clear();
  theSisters.reserve(1000);
 
  const auto& comp = ali->mother()->components();
 
  unsigned int nComp = comp.size();
 
  for (unsigned int i = 0; i < nComp; ++i) {
    const Alignable* dau = comp[i];
 
    if (dau != ali || bias)
      theSisters.insert(theSisters.end(), dau->deepComponents().begin(), dau->deepComponents().end());
    //     if (dau != ali || bias) theSisters.push_back(dau);
  }
}
 
void SurveyResidual::calculate(const Alignable& ali) {
  unsigned int nSister = theSisters.size();
 
  // First get sisters' positions
 
  std::vector<const PositionType*> nominalSisPos;  // nominal sisters' pos
  std::vector<const PositionType*> currentSisPos;  // current sisters' pos
 
  nominalSisPos.reserve(nSister);
  currentSisPos.reserve(nSister);
 
  for (unsigned int i = 0; i < nSister; ++i) {
    const Alignable* sis = theSisters[i];
    const SurveyDet* survey = sis->survey();
 
    if (!survey) {
      throw cms::Exception("ConfigError") << "No survey info is found for Alignable "
                                          << " (id = " << sis->geomDetId().rawId() << "). Abort!";
    }
 
    nominalSisPos.push_back(&survey->position());
    currentSisPos.push_back(&sis->globalPosition());
  }
 
  // Then find mother's position using sisters' positions
 
  PositionType nominalMomPos = motherPosition(nominalSisPos);
  PositionType currentMomPos = motherPosition(currentSisPos);
 
  // Now find rotation from nominal mother to current mother
 
  GlobalVectors nominalSisVs;  // nominal sisters' pos from mother's pos
  GlobalVectors currentSisVs;  // current sisters' pos from mother's pos
 
  for (unsigned int i = 0; i < nSister; ++i) {
    const Alignable* sis = theSisters[i];
 
    const GlobalPoints& nominalSisPoints = sis->survey()->globalPoints();
    const GlobalPoints& currentSisPoints = sis->surface().toGlobal(sis->survey()->localPoints());
 
    for (unsigned int j = 0; j < nominalSisPoints.size(); ++j) {
      nominalSisVs.push_back(nominalSisPoints[j] - *nominalSisPos[i]);
      currentSisVs.push_back(currentSisPoints[j] - *currentSisPos[i]);
      //       nominalSisVs.push_back(nominalSisPoints[j] - nominalMomPos);
      //       currentSisVs.push_back(currentSisPoints[j] - currentMomPos);
    }
  }
 
  RotationType toCurrent = diffRot(currentSisVs, nominalSisVs);
 
  // Finally shift and rotate nominal sensor to current sensor
 
  const SurveyDet* survey = ali.survey();
 
  if (!survey) {
    throw cms::Exception("ConfigError") << "No survey info is found for Alignable "
                                        << " (id = " << ali.geomDetId().rawId() << "). Abort!";
  }
 
  const GlobalPoints& nominalPoints = survey->globalPoints();
  const GlobalPoints& currentPoints = theSurface.toGlobal(survey->localPoints());
 
  for (unsigned int j = 0; j < nominalPoints.size(); ++j) {
    align::GlobalVector nv = nominalPoints[j] - nominalMomPos;
 
    theNominalVs.push_back(align::GlobalVector(toCurrent * nv.basicVector()));
    theCurrentVs.push_back(currentPoints[j] - currentMomPos);
  }
 
  // Find the covariance
 
  const RotationType& currentFrame = ali.globalRotation();
 
  for (const Alignable* a = &ali; a != theMother->mother(); a = a->mother()) {
    RotationType deltaR = currentFrame * a->survey()->rotation().transposed();
 
    math::Matrix<6, 6>::type jac;  // 6 by 6 Jacobian init to 0
 
    jac(0, 0) = deltaR.xx();
    jac(0, 1) = deltaR.xy();
    jac(0, 2) = deltaR.xz();
    jac(1, 0) = deltaR.yx();
    jac(1, 1) = deltaR.yy();
    jac(1, 2) = deltaR.yz();
    jac(2, 0) = deltaR.zx();
    jac(2, 1) = deltaR.zy();
    jac(2, 2) = deltaR.zz();
    jac(3, 3) = deltaR.xx();
    jac(3, 4) = deltaR.xy();
    jac(3, 5) = deltaR.xz();
    jac(4, 3) = deltaR.yx();
    jac(4, 4) = deltaR.yy();
    jac(4, 5) = deltaR.yz();
    jac(5, 3) = deltaR.zx();
    jac(5, 4) = deltaR.zy();
    jac(5, 5) = deltaR.zz();
 
    theCovariance += ROOT::Math::Similarity(jac, a->survey()->errors());
  }
}
 
// AlgebraicMatrix SurveyResidual::errorTransform(const RotationType& initialFrame,
//                         const RotationType& currentFrame) const
// {
// //   align::EulerAngles angles = align::toAngles(r);
 
// //   align::Scalar s1 = std::sin(angles[0]), c1 = std::cos(angles[0]);
// //   align::Scalar s2 = std::sin(angles[1]), c2 = std::cos(angles[1]);
// //   align::Scalar s3 = std::sin(angles[2]), c3 = std::cos(angles[2]);
 
//   AlgebraicMatrix drdw(9, 3, 0); // 9 by 3 Jacobian init to 0
 
// //   drdw(1, 1) =  0;
// //   drdw(1, 2) =  -s2 * c3;
// //   drdw(1, 3) =  c2 * -s3;
// //   drdw(2, 1) =  -s1 * s3 + c1 * s2 * c3;
// //   drdw(2, 2) =  s1 * c2 * c3;
// //   drdw(2, 3) =  c1 * c3 - s1 * s2 * s3;
// //   drdw(3, 1) =  c1 * s3 + s1 * s2 * c3;
// //   drdw(3, 2) =  -c1 * c2 * c3;
// //   drdw(3, 3) =  s1 * c3 + c1 * s2 * s3;
// //   drdw(4, 1) =  0;
// //   drdw(4, 2) =  s2 * s3;
// //   drdw(4, 3) =  -c2 * c3;
// //   drdw(5, 1) =  -s1 * c3 - c1 * s2 * s3;
// //   drdw(5, 2) =  -s1 * c2 * s3;
// //   drdw(5, 3) =  c1 * -s3 - s1 * s2 * c3;
// //   drdw(6, 1) =  c1 * c3 - s1 * s2 * s3;
// //   drdw(6, 2) =  c1 * c2 * s3;
// //   drdw(6, 3) =  s1 * -s3 + c1 * s2 * c3;
// //   drdw(7, 1) =  0;
// //   drdw(7, 2) =  c2;
// //   drdw(7, 3) =  0;
// //   drdw(8, 1) =  -c1 * c2;
// //   drdw(8, 2) =  s1 * s2;
// //   drdw(8, 3) =  0;
// //   drdw(9, 1) =  -s1 * c2;
// //   drdw(9, 2) =  c1 * -s2;
// //   drdw(9, 3) =  0;
//   drdw(2, 3) = drdw(6, 1) = drdw(7, 2) =  1;
//   drdw(3, 2) = drdw(4, 3) = drdw(8, 1) = -1;
 
//   align::RotationType deltaR = initialFrame * currentFrame.transposed();
 
//   AlgebraicMatrix dRdr(9, 9, 0); // 9 by 9 Jacobian init to 0
 
//   dRdr(1, 1) = deltaR.xx(); dRdr(1, 2) = deltaR.yx(); dRdr(1, 3) = deltaR.zx();
//   dRdr(2, 1) = deltaR.xy(); dRdr(2, 2) = deltaR.yy(); dRdr(2, 3) = deltaR.zy();
//   dRdr(3, 1) = deltaR.xz(); dRdr(3, 2) = deltaR.yz(); dRdr(3, 3) = deltaR.zz();
//   dRdr(4, 4) = deltaR.xx(); dRdr(4, 5) = deltaR.yx(); dRdr(4, 6) = deltaR.zx();
//   dRdr(5, 4) = deltaR.xy(); dRdr(5, 5) = deltaR.yy(); dRdr(5, 6) = deltaR.zy();
//   dRdr(6, 4) = deltaR.xz(); dRdr(6, 5) = deltaR.yz(); dRdr(6, 6) = deltaR.zz();
//   dRdr(7, 7) = deltaR.xx(); dRdr(7, 8) = deltaR.yx(); dRdr(7, 9) = deltaR.zx();
//   dRdr(8, 7) = deltaR.xy(); dRdr(8, 8) = deltaR.yy(); dRdr(8, 9) = deltaR.zy();
//   dRdr(9, 7) = deltaR.xz(); dRdr(9, 8) = deltaR.yz(); dRdr(9, 9) = deltaR.zz();
 
// //   align::RotationType R = r * deltaR;
 
//   AlgebraicMatrix dWdR(3, 9, 0); // 3 by 9 Jacobian init to 0
 
//   align::Scalar R11 = deltaR.xx(), R21 = deltaR.yx();
//   align::Scalar R31 = deltaR.zx(), R32 = deltaR.zy(), R33 = deltaR.zz();
 
//   align::Scalar den1 = R32 * R32 + R33 * R33;
//   align::Scalar den3 = R11 * R11 + R21 * R21;
 
//   dWdR(1, 8) = -R33 / den1; dWdR(1, 9) = R32 / den1;
//   dWdR(2, 7) = 1 / std::sqrt(1 - R31 * R31);
//   dWdR(3, 1) = R21 / den3; dWdR(3, 4) = -R11 / den3;
 
//   AlgebraicMatrix dPdp(6, 6, 0);
 
//   dPdp(1, 1) = deltaR.xx(); dPdp(1, 2) = deltaR.xy(); dPdp(1, 3) = deltaR.xz();
//   dPdp(2, 1) = deltaR.yx(); dPdp(2, 2) = deltaR.yy(); dPdp(2, 3) = deltaR.yz();
//   dPdp(3, 1) = deltaR.zx(); dPdp(3, 2) = deltaR.zy(); dPdp(3, 3) = deltaR.zz();
 
//   dPdp.sub(4, 4, dWdR * dRdr * drdw);
 
//   return dPdp;
// }