CMS 3D CMS Logo
List of all members | Public Member Functions | Public Attributes | Private Attributes
OuterTrackerMonitorTTStub Class Reference
Inheritance diagram for OuterTrackerMonitorTTStub:
DQMEDAnalyzer edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >

Public Member Functions

void analyze (const edm::Event &, const edm::EventSetup &) override
 
void bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override
 
 OuterTrackerMonitorTTStub (const edm::ParameterSet &)
 
 ~OuterTrackerMonitorTTStub () override
 
- Public Member Functions inherited from DQMEDAnalyzer
void accumulate (edm::Event const &event, edm::EventSetup const &setup) final
 
void beginLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final
 
void beginRun (edm::Run const &run, edm::EventSetup const &setup) final
 
void beginStream (edm::StreamID id) final
 
virtual void dqmBeginRun (edm::Run const &, edm::EventSetup const &)
 
 DQMEDAnalyzer ()
 
void endLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final
 
void endRun (edm::Run const &run, edm::EventSetup const &setup) final
 
virtual bool getCanSaveByLumi ()
 
- Public Member Functions inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
 EDProducer ()=default
 
bool hasAbilityToProduceInBeginLumis () const final
 
bool hasAbilityToProduceInBeginProcessBlocks () const final
 
bool hasAbilityToProduceInBeginRuns () const final
 
bool hasAbilityToProduceInEndLumis () const final
 
bool hasAbilityToProduceInEndProcessBlocks () const final
 
bool hasAbilityToProduceInEndRuns () const final
 

Public Attributes

MonitorElement * Stub_Barrel = nullptr
 
MonitorElement * Stub_Barrel_O = nullptr
 
MonitorElement * Stub_Barrel_W = nullptr
 
MonitorElement * Stub_Barrel_XY = nullptr
 
MonitorElement * Stub_bendBE = nullptr
 
MonitorElement * Stub_bendFE = nullptr
 
MonitorElement * Stub_bendOffset = nullptr
 
MonitorElement * Stub_Endcap_Bw_XY = nullptr
 
MonitorElement * Stub_Endcap_Disc = nullptr
 
MonitorElement * Stub_Endcap_Disc_Bw = nullptr
 
MonitorElement * Stub_Endcap_Disc_Fw = nullptr
 
MonitorElement * Stub_Endcap_Disc_O = nullptr
 
MonitorElement * Stub_Endcap_Disc_W = nullptr
 
MonitorElement * Stub_Endcap_Fw_XY = nullptr
 
MonitorElement * Stub_Endcap_Ring = nullptr
 
MonitorElement * Stub_Endcap_Ring_Bw [5] = {nullptr, nullptr, nullptr, nullptr, nullptr}
 
MonitorElement * Stub_Endcap_Ring_Fw [5] = {nullptr, nullptr, nullptr, nullptr, nullptr}
 
MonitorElement * Stub_Endcap_Ring_O = nullptr
 
MonitorElement * Stub_Endcap_Ring_O_Bw [5] = {nullptr, nullptr, nullptr, nullptr, nullptr}
 
MonitorElement * Stub_Endcap_Ring_O_Fw [5] = {nullptr, nullptr, nullptr, nullptr, nullptr}
 
MonitorElement * Stub_Endcap_Ring_W = nullptr
 
MonitorElement * Stub_Endcap_Ring_W_Bw [5]
 
MonitorElement * Stub_Endcap_Ring_W_Fw [5]
 
MonitorElement * Stub_Eta = nullptr
 
MonitorElement * Stub_isPS = nullptr
 
MonitorElement * Stub_Phi = nullptr
 
MonitorElement * Stub_R = nullptr
 
MonitorElement * Stub_rawBend = nullptr
 
MonitorElement * Stub_RZ = nullptr
 

Private Attributes

edm::ParameterSet conf_
 
edm::EDGetTokenT< edmNew::DetSetVector< TTStub< Ref_Phase2TrackerDigi_ > > > tagTTStubsToken_
 
std::string topFolderName_
 

Additional Inherited Members

- Public Types inherited from DQMEDAnalyzer
typedef dqm::reco::DQMStore DQMStore
 
typedef dqm::reco::MonitorElement MonitorElement
 
- Public Types inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
typedef CacheContexts< T... > CacheTypes
 
typedef CacheTypes::GlobalCache GlobalCache
 
typedef AbilityChecker< T... > HasAbility
 
typedef CacheTypes::LuminosityBlockCache LuminosityBlockCache
 
typedef LuminosityBlockContextT< LuminosityBlockCache, RunCache, GlobalCache > LuminosityBlockContext
 
typedef CacheTypes::LuminosityBlockSummaryCache LuminosityBlockSummaryCache
 
typedef CacheTypes::RunCache RunCache
 
typedef RunContextT< RunCache, GlobalCache > RunContext
 
typedef CacheTypes::RunSummaryCache RunSummaryCache
 
- Static Public Member Functions inherited from DQMEDAnalyzer
static void globalEndJob (DQMEDAnalyzerGlobalCache const *)
 
static void globalEndLuminosityBlockProduce (edm::LuminosityBlock &lumi, edm::EventSetup const &setup, LuminosityBlockContext const *context)
 
static void globalEndRunProduce (edm::Run &run, edm::EventSetup const &setup, RunContext const *context)
 
static std::unique_ptr< DQMEDAnalyzerGlobalCache > initializeGlobalCache (edm::ParameterSet const &)
 
- Protected Member Functions inherited from DQMEDAnalyzer
uint64_t meId () const
 
- Protected Attributes inherited from DQMEDAnalyzer
edm::EDPutTokenT< DQMToken > lumiToken_
 
edm::EDPutTokenT< DQMToken > runToken_
 
unsigned int streamId_
 

Detailed Description

Definition at line 49 of file OuterTrackerMonitorTTStub.cc.

Constructor & Destructor Documentation

◆ OuterTrackerMonitorTTStub()

OuterTrackerMonitorTTStub::OuterTrackerMonitorTTStub ( const edm::ParameterSet &  iConfig)
explicit

Definition at line 103 of file OuterTrackerMonitorTTStub.cc.

103  : conf_(iConfig) {
104  // now do what ever initialization is needed
105  topFolderName_ = conf_.getParameter<std::string>("TopFolderName");
106  tagTTStubsToken_ =
107  consumes<edmNew::DetSetVector<TTStub<Ref_Phase2TrackerDigi_>>>(conf_.getParameter<edm::InputTag>("TTStubs"));
108 }

References conf_, edm::ParameterSet::getParameter(), AlCaHLTBitMon_QueryRunRegistry::string, tagTTStubsToken_, and topFolderName_.

◆ ~OuterTrackerMonitorTTStub()

OuterTrackerMonitorTTStub::~OuterTrackerMonitorTTStub ( )
override

Definition at line 110 of file OuterTrackerMonitorTTStub.cc.

110  {
111  // do anything here that needs to be done at desctruction time
112  // (e.g. close files, deallocate resources etc.)
113 }

Member Function Documentation

◆ analyze()

void OuterTrackerMonitorTTStub::analyze ( const edm::Event &  iEvent,
const edm::EventSetup &  iSetup 
)
overridevirtual

Track Trigger Stubs

Geometry

Loop over input Stubs

Make reference stub

Get det ID (place of the stub)

Get trigger displacement/offset

Define position stub by position inner cluster

Reimplemented from DQMEDAnalyzer.

Definition at line 118 of file OuterTrackerMonitorTTStub.cc.

118  {
120  edm::Handle<edmNew::DetSetVector<TTStub<Ref_Phase2TrackerDigi_>>> Phase2TrackerDigiTTStubHandle;
121  iEvent.getByToken(tagTTStubsToken_, Phase2TrackerDigiTTStubHandle);
122 
124  edm::ESHandle<TrackerTopology> tTopoHandle;
125  const TrackerTopology *tTopo;
126  iSetup.get<TrackerTopologyRcd>().get(tTopoHandle);
127  tTopo = tTopoHandle.product();
128 
129  edm::ESHandle<TrackerGeometry> tGeometryHandle;
130  const TrackerGeometry *theTrackerGeometry;
131  iSetup.get<TrackerDigiGeometryRecord>().get(tGeometryHandle);
132  theTrackerGeometry = tGeometryHandle.product();
133 
135  typename edmNew::DetSetVector<TTStub<Ref_Phase2TrackerDigi_>>::const_iterator inputIter;
136  typename edmNew::DetSet<TTStub<Ref_Phase2TrackerDigi_>>::const_iterator contentIter;
137  // Adding protection
138  if (!Phase2TrackerDigiTTStubHandle.isValid())
139  return;
140 
141  for (inputIter = Phase2TrackerDigiTTStubHandle->begin(); inputIter != Phase2TrackerDigiTTStubHandle->end();
142  ++inputIter) {
143  for (contentIter = inputIter->begin(); contentIter != inputIter->end(); ++contentIter) {
145  edm::Ref<edmNew::DetSetVector<TTStub<Ref_Phase2TrackerDigi_>>, TTStub<Ref_Phase2TrackerDigi_>> tempStubRef =
146  edmNew::makeRefTo(Phase2TrackerDigiTTStubHandle, contentIter);
147 
149  // tempStubRef->getDetId() gives the stackDetId, not rawId
150  DetId detIdStub = theTrackerGeometry->idToDet((tempStubRef->clusterRef(0))->getDetId())->geographicalId();
151 
153  double rawBend = tempStubRef->rawBend();
154  double bendOffset = tempStubRef->bendOffset();
155 
157  MeasurementPoint mp = (tempStubRef->clusterRef(0))->findAverageLocalCoordinates();
158  const GeomDet *theGeomDet = theTrackerGeometry->idToDet(detIdStub);
159  Global3DPoint posStub = theGeomDet->surface().toGlobal(theGeomDet->topology().localPosition(mp));
160 
161  Stub_Eta->Fill(posStub.eta());
162  Stub_Phi->Fill(posStub.phi());
163  Stub_R->Fill(posStub.perp());
164  Stub_RZ->Fill(posStub.z(), posStub.perp());
165  Stub_bendFE->Fill(tempStubRef->bendFE());
166  Stub_bendBE->Fill(tempStubRef->bendBE());
167  Stub_rawBend->Fill(rawBend);
168  Stub_bendOffset->Fill(bendOffset);
169  Stub_isPS->Fill(tempStubRef->moduleTypePS());
170 
171  if (detIdStub.subdetId() == static_cast<int>(StripSubdetector::TOB)) { // Phase 2 Outer Tracker Barrel
172  Stub_Barrel->Fill(tTopo->layer(detIdStub));
173  Stub_Barrel_XY->Fill(posStub.x(), posStub.y());
174  Stub_Barrel_W->Fill(tTopo->layer(detIdStub), rawBend - bendOffset);
175  Stub_Barrel_O->Fill(tTopo->layer(detIdStub), bendOffset);
176  } else if (detIdStub.subdetId() == static_cast<int>(StripSubdetector::TID)) { // Phase 2 Outer Tracker Endcap
177  int disc = tTopo->layer(detIdStub); // returns wheel
178  int ring = tTopo->tidRing(detIdStub);
179  Stub_Endcap_Disc->Fill(disc);
180  Stub_Endcap_Ring->Fill(ring);
181  Stub_Endcap_Disc_W->Fill(disc, rawBend - bendOffset);
182  Stub_Endcap_Ring_W->Fill(ring, rawBend - bendOffset);
183  Stub_Endcap_Disc_O->Fill(disc, bendOffset);
184  Stub_Endcap_Ring_O->Fill(ring, bendOffset);
185 
186  if (posStub.z() > 0) {
187  Stub_Endcap_Fw_XY->Fill(posStub.x(), posStub.y());
188  Stub_Endcap_Disc_Fw->Fill(disc);
189  Stub_Endcap_Ring_Fw[disc - 1]->Fill(ring);
190  Stub_Endcap_Ring_W_Fw[disc - 1]->Fill(ring, rawBend - bendOffset);
191  Stub_Endcap_Ring_O_Fw[disc - 1]->Fill(ring, bendOffset);
192  } else {
193  Stub_Endcap_Bw_XY->Fill(posStub.x(), posStub.y());
194  Stub_Endcap_Disc_Bw->Fill(disc);
195  Stub_Endcap_Ring_Bw[disc - 1]->Fill(ring);
196  Stub_Endcap_Ring_W_Bw[disc - 1]->Fill(ring, rawBend - bendOffset);
197  Stub_Endcap_Ring_O_Bw[disc - 1]->Fill(ring, bendOffset);
198  }
199  }
200  }
201  }
202 } // end of method

References edmNew::DetSetVector< T >::begin(), TtSemiLepEvtBuilder_cfi::disc, edmNew::DetSetVector< T >::end(), PV3DBase< T, PVType, FrameType >::eta(), dqm::impl::MonitorElement::Fill(), edm::EventSetup::get(), get, TrackerGeometry::idToDet(), iEvent, edm::HandleBase::isValid(), TrackerTopology::layer(), Topology::localPosition(), edmNew::makeRefTo(), PV3DBase< T, PVType, FrameType >::perp(), PV3DBase< T, PVType, FrameType >::phi(), edm::ESHandle< T >::product(), relativeConstraints::ring, Stub_Barrel, Stub_Barrel_O, Stub_Barrel_W, Stub_Barrel_XY, Stub_bendBE, Stub_bendFE, Stub_bendOffset, Stub_Endcap_Bw_XY, Stub_Endcap_Disc, Stub_Endcap_Disc_Bw, Stub_Endcap_Disc_Fw, Stub_Endcap_Disc_O, Stub_Endcap_Disc_W, Stub_Endcap_Fw_XY, Stub_Endcap_Ring, Stub_Endcap_Ring_Bw, Stub_Endcap_Ring_Fw, Stub_Endcap_Ring_O, Stub_Endcap_Ring_O_Bw, Stub_Endcap_Ring_O_Fw, Stub_Endcap_Ring_W, Stub_Endcap_Ring_W_Bw, Stub_Endcap_Ring_W_Fw, Stub_Eta, Stub_isPS, Stub_Phi, Stub_R, Stub_rawBend, Stub_RZ, DetId::subdetId(), GeomDet::surface(), tagTTStubsToken_, StripSubdetector::TID, TrackerTopology::tidRing(), StripSubdetector::TOB, Surface::toGlobal(), GeomDet::topology(), PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

◆ bookHistograms()

void OuterTrackerMonitorTTStub::bookHistograms ( DQMStore::IBooker &  iBooker,
edm::Run const &  run,
edm::EventSetup const &  es 
)
overridevirtual

Implements DQMEDAnalyzer.

Definition at line 205 of file OuterTrackerMonitorTTStub.cc.

207  {
208  std::string HistoName;
209  const int numDiscs = 5;
210  iBooker.setCurrentFolder(topFolderName_ + "/Stubs/Position");
211 
212  edm::ParameterSet psTTStub_Barrel_XY = conf_.getParameter<edm::ParameterSet>("TH2TTStub_Position");
213  HistoName = "Stub_Barrel_XY";
214  Stub_Barrel_XY = iBooker.book2D(HistoName,
215  HistoName,
216  psTTStub_Barrel_XY.getParameter<int32_t>("Nbinsx"),
217  psTTStub_Barrel_XY.getParameter<double>("xmin"),
218  psTTStub_Barrel_XY.getParameter<double>("xmax"),
219  psTTStub_Barrel_XY.getParameter<int32_t>("Nbinsy"),
220  psTTStub_Barrel_XY.getParameter<double>("ymin"),
221  psTTStub_Barrel_XY.getParameter<double>("ymax"));
222  Stub_Barrel_XY->setAxisTitle("L1 Stub Barrel position x [cm]", 1);
223  Stub_Barrel_XY->setAxisTitle("L1 Stub Barrel position y [cm]", 2);
224 
225  edm::ParameterSet psTTStub_Endcap_Fw_XY = conf_.getParameter<edm::ParameterSet>("TH2TTStub_Position");
226  HistoName = "Stub_Endcap_Fw_XY";
227  Stub_Endcap_Fw_XY = iBooker.book2D(HistoName,
228  HistoName,
229  psTTStub_Endcap_Fw_XY.getParameter<int32_t>("Nbinsx"),
230  psTTStub_Endcap_Fw_XY.getParameter<double>("xmin"),
231  psTTStub_Endcap_Fw_XY.getParameter<double>("xmax"),
232  psTTStub_Endcap_Fw_XY.getParameter<int32_t>("Nbinsy"),
233  psTTStub_Endcap_Fw_XY.getParameter<double>("ymin"),
234  psTTStub_Endcap_Fw_XY.getParameter<double>("ymax"));
235  Stub_Endcap_Fw_XY->setAxisTitle("L1 Stub Endcap position x [cm]", 1);
236  Stub_Endcap_Fw_XY->setAxisTitle("L1 Stub Endcap position y [cm]", 2);
237 
238  edm::ParameterSet psTTStub_Endcap_Bw_XY = conf_.getParameter<edm::ParameterSet>("TH2TTStub_Position");
239  HistoName = "Stub_Endcap_Bw_XY";
240  Stub_Endcap_Bw_XY = iBooker.book2D(HistoName,
241  HistoName,
242  psTTStub_Endcap_Bw_XY.getParameter<int32_t>("Nbinsx"),
243  psTTStub_Endcap_Bw_XY.getParameter<double>("xmin"),
244  psTTStub_Endcap_Bw_XY.getParameter<double>("xmax"),
245  psTTStub_Endcap_Bw_XY.getParameter<int32_t>("Nbinsy"),
246  psTTStub_Endcap_Bw_XY.getParameter<double>("ymin"),
247  psTTStub_Endcap_Bw_XY.getParameter<double>("ymax"));
248  Stub_Endcap_Bw_XY->setAxisTitle("L1 Stub Endcap position x [cm]", 1);
249  Stub_Endcap_Bw_XY->setAxisTitle("L1 Stub Endcap position y [cm]", 2);
250 
251  // TTStub #rho vs. z
252  edm::ParameterSet psTTStub_RZ = conf_.getParameter<edm::ParameterSet>("TH2TTStub_RZ");
253  HistoName = "Stub_RZ";
254  Stub_RZ = iBooker.book2D(HistoName,
255  HistoName,
256  psTTStub_RZ.getParameter<int32_t>("Nbinsx"),
257  psTTStub_RZ.getParameter<double>("xmin"),
258  psTTStub_RZ.getParameter<double>("xmax"),
259  psTTStub_RZ.getParameter<int32_t>("Nbinsy"),
260  psTTStub_RZ.getParameter<double>("ymin"),
261  psTTStub_RZ.getParameter<double>("ymax"));
262  Stub_RZ->setAxisTitle("L1 Stub position z [cm]", 1);
263  Stub_RZ->setAxisTitle("L1 Stub position #rho [cm]", 2);
264 
265  iBooker.setCurrentFolder(topFolderName_ + "/Stubs");
266  // TTStub eta
267  edm::ParameterSet psTTStub_Eta = conf_.getParameter<edm::ParameterSet>("TH1TTStub_Eta");
268  HistoName = "Stub_Eta";
269  Stub_Eta = iBooker.book1D(HistoName,
270  HistoName,
271  psTTStub_Eta.getParameter<int32_t>("Nbinsx"),
272  psTTStub_Eta.getParameter<double>("xmin"),
273  psTTStub_Eta.getParameter<double>("xmax"));
274  Stub_Eta->setAxisTitle("#eta", 1);
275  Stub_Eta->setAxisTitle("# L1 Stubs ", 2);
276 
277  // TTStub phi
278  edm::ParameterSet psTTStub_Phi = conf_.getParameter<edm::ParameterSet>("TH1TTStub_Phi");
279  HistoName = "Stub_Phi";
280  Stub_Phi = iBooker.book1D(HistoName,
281  HistoName,
282  psTTStub_Phi.getParameter<int32_t>("Nbinsx"),
283  psTTStub_Phi.getParameter<double>("xmin"),
284  psTTStub_Phi.getParameter<double>("xmax"));
285  Stub_Phi->setAxisTitle("#phi", 1);
286  Stub_Phi->setAxisTitle("# L1 Stubs ", 2);
287 
288  // TTStub R
289  edm::ParameterSet psTTStub_R = conf_.getParameter<edm::ParameterSet>("TH1TTStub_R");
290  HistoName = "Stub_R";
291  Stub_R = iBooker.book1D(HistoName,
292  HistoName,
293  psTTStub_R.getParameter<int32_t>("Nbinsx"),
294  psTTStub_R.getParameter<double>("xmin"),
295  psTTStub_R.getParameter<double>("xmax"));
296  Stub_R->setAxisTitle("R", 1);
297  Stub_R->setAxisTitle("# L1 Stubs ", 2);
298 
299  // TTStub trigger bend
300  edm::ParameterSet psTTStub_bend = conf_.getParameter<edm::ParameterSet>("TH1TTStub_bend");
301  HistoName = "Stub_bendFE";
302  Stub_bendFE = iBooker.book1D(HistoName,
303  HistoName,
304  psTTStub_bend.getParameter<int32_t>("Nbinsx"),
305  psTTStub_bend.getParameter<double>("xmin"),
306  psTTStub_bend.getParameter<double>("xmax"));
307  Stub_bendFE->setAxisTitle("Trigger bend", 1);
308  Stub_bendFE->setAxisTitle("# L1 Stubs ", 2);
309 
310  // TTStub hardware bend
311  HistoName = "Stub_bendBE";
312  Stub_bendBE = iBooker.book1D(HistoName,
313  HistoName,
314  psTTStub_bend.getParameter<int32_t>("Nbinsx"),
315  psTTStub_bend.getParameter<double>("xmin"),
316  psTTStub_bend.getParameter<double>("xmax"));
317  Stub_bendBE->setAxisTitle("Hardware bend", 1);
318  Stub_bendBE->setAxisTitle("# L1 Stubs ", 2);
319 
320  // TTStub raw bend
321  HistoName = "Stub_rawBend";
322  Stub_rawBend = iBooker.book1D(HistoName,
323  HistoName,
324  psTTStub_bend.getParameter<int32_t>("Nbinsx"),
325  psTTStub_bend.getParameter<double>("xmin"),
326  psTTStub_bend.getParameter<double>("xmax"));
327  Stub_rawBend->setAxisTitle("Raw bend", 1);
328  Stub_rawBend->setAxisTitle("# L1 Stubs ", 2);
329 
330  // TTStub bend offset
331  HistoName = "Stub_bendOffset";
332  Stub_bendOffset = iBooker.book1D(HistoName,
333  HistoName,
334  psTTStub_bend.getParameter<int32_t>("Nbinsx"),
335  psTTStub_bend.getParameter<double>("xmin"),
336  psTTStub_bend.getParameter<double>("xmax"));
337  Stub_bendOffset->setAxisTitle("Bend offset", 1);
338  Stub_bendOffset->setAxisTitle("# L1 Stubs ", 2);
339 
340  // TTStub, is PS?
341  edm::ParameterSet psTTStub_isPS = conf_.getParameter<edm::ParameterSet>("TH1TTStub_isPS");
342  HistoName = "Stub_isPS";
343  Stub_isPS = iBooker.book1D(HistoName,
344  HistoName,
345  psTTStub_isPS.getParameter<int32_t>("Nbinsx"),
346  psTTStub_isPS.getParameter<double>("xmin"),
347  psTTStub_isPS.getParameter<double>("xmax"));
348  Stub_isPS->setAxisTitle("Is PS?", 1);
349  Stub_isPS->setAxisTitle("# L1 Stubs ", 2);
350 
351  iBooker.setCurrentFolder(topFolderName_ + "/Stubs/NStubs");
352  // TTStub barrel stack
353  edm::ParameterSet psTTStub_Barrel = conf_.getParameter<edm::ParameterSet>("TH1TTStub_Layers");
354  HistoName = "NStubs_Barrel";
355  Stub_Barrel = iBooker.book1D(HistoName,
356  HistoName,
357  psTTStub_Barrel.getParameter<int32_t>("Nbinsx"),
358  psTTStub_Barrel.getParameter<double>("xmin"),
359  psTTStub_Barrel.getParameter<double>("xmax"));
360  Stub_Barrel->setAxisTitle("Barrel Layer", 1);
361  Stub_Barrel->setAxisTitle("# L1 Stubs ", 2);
362 
363  // TTStub Endcap stack
364  edm::ParameterSet psTTStub_ECDisc = conf_.getParameter<edm::ParameterSet>("TH1TTStub_Discs");
365  HistoName = "NStubs_Endcap_Disc";
366  Stub_Endcap_Disc = iBooker.book1D(HistoName,
367  HistoName,
368  psTTStub_ECDisc.getParameter<int32_t>("Nbinsx"),
369  psTTStub_ECDisc.getParameter<double>("xmin"),
370  psTTStub_ECDisc.getParameter<double>("xmax"));
371  Stub_Endcap_Disc->setAxisTitle("Endcap Disc", 1);
372  Stub_Endcap_Disc->setAxisTitle("# L1 Stubs ", 2);
373 
374  // TTStub Endcap stack
375  HistoName = "NStubs_Endcap_Disc_Fw";
376  Stub_Endcap_Disc_Fw = iBooker.book1D(HistoName,
377  HistoName,
378  psTTStub_ECDisc.getParameter<int32_t>("Nbinsx"),
379  psTTStub_ECDisc.getParameter<double>("xmin"),
380  psTTStub_ECDisc.getParameter<double>("xmax"));
381  Stub_Endcap_Disc_Fw->setAxisTitle("Forward Endcap Disc", 1);
382  Stub_Endcap_Disc_Fw->setAxisTitle("# L1 Stubs ", 2);
383 
384  // TTStub Endcap stack
385  HistoName = "NStubs_Endcap_Disc_Bw";
386  Stub_Endcap_Disc_Bw = iBooker.book1D(HistoName,
387  HistoName,
388  psTTStub_ECDisc.getParameter<int32_t>("Nbinsx"),
389  psTTStub_ECDisc.getParameter<double>("xmin"),
390  psTTStub_ECDisc.getParameter<double>("xmax"));
391  Stub_Endcap_Disc_Bw->setAxisTitle("Backward Endcap Disc", 1);
392  Stub_Endcap_Disc_Bw->setAxisTitle("# L1 Stubs ", 2);
393 
394  edm::ParameterSet psTTStub_ECRing = conf_.getParameter<edm::ParameterSet>("TH1TTStub_Rings");
395  HistoName = "NStubs_Endcap_Ring";
396  Stub_Endcap_Ring = iBooker.book1D(HistoName,
397  HistoName,
398  psTTStub_ECRing.getParameter<int32_t>("Nbinsx"),
399  psTTStub_ECRing.getParameter<double>("xmin"),
400  psTTStub_ECRing.getParameter<double>("xmax"));
401  Stub_Endcap_Ring->setAxisTitle("Endcap Ring", 1);
402  Stub_Endcap_Ring->setAxisTitle("# L1 Stubs ", 2);
403 
404  for (int i = 0; i < numDiscs; i++) {
405  HistoName = "NStubs_Disc+" + std::to_string(i + 1);
406  // TTStub Endcap stack
407  Stub_Endcap_Ring_Fw[i] = iBooker.book1D(HistoName,
408  HistoName,
409  psTTStub_ECRing.getParameter<int32_t>("Nbinsx"),
410  psTTStub_ECRing.getParameter<double>("xmin"),
411  psTTStub_ECRing.getParameter<double>("xmax"));
412  Stub_Endcap_Ring_Fw[i]->setAxisTitle("Endcap Ring", 1);
413  Stub_Endcap_Ring_Fw[i]->setAxisTitle("# L1 Stubs ", 2);
414  }
415 
416  for (int i = 0; i < numDiscs; i++) {
417  HistoName = "NStubs_Disc-" + std::to_string(i + 1);
418  // TTStub Endcap stack
419  Stub_Endcap_Ring_Bw[i] = iBooker.book1D(HistoName,
420  HistoName,
421  psTTStub_ECRing.getParameter<int32_t>("Nbinsx"),
422  psTTStub_ECRing.getParameter<double>("xmin"),
423  psTTStub_ECRing.getParameter<double>("xmax"));
424  Stub_Endcap_Ring_Bw[i]->setAxisTitle("Endcap Ring", 1);
425  Stub_Endcap_Ring_Bw[i]->setAxisTitle("# L1 Stubs ", 2);
426  }
427 
428  // TTStub displ/offset
429  edm::ParameterSet psTTStub_Barrel_2D = conf_.getParameter<edm::ParameterSet>("TH2TTStub_DisOf_Layer");
430  edm::ParameterSet psTTStub_ECDisc_2D = conf_.getParameter<edm::ParameterSet>("TH2TTStub_DisOf_Disc");
431  edm::ParameterSet psTTStub_ECRing_2D = conf_.getParameter<edm::ParameterSet>("TH2TTStub_DisOf_Ring");
432 
433  iBooker.setCurrentFolder(topFolderName_ + "/Stubs/Width");
434  HistoName = "Stub_Width_Barrel";
435  Stub_Barrel_W = iBooker.book2D(HistoName,
436  HistoName,
437  psTTStub_Barrel_2D.getParameter<int32_t>("Nbinsx"),
438  psTTStub_Barrel_2D.getParameter<double>("xmin"),
439  psTTStub_Barrel_2D.getParameter<double>("xmax"),
440  psTTStub_Barrel_2D.getParameter<int32_t>("Nbinsy"),
441  psTTStub_Barrel_2D.getParameter<double>("ymin"),
442  psTTStub_Barrel_2D.getParameter<double>("ymax"));
443  Stub_Barrel_W->setAxisTitle("Barrel Layer", 1);
444  Stub_Barrel_W->setAxisTitle("Displacement - Offset", 2);
445 
446  HistoName = "Stub_Width_Endcap_Disc";
447  Stub_Endcap_Disc_W = iBooker.book2D(HistoName,
448  HistoName,
449  psTTStub_ECDisc_2D.getParameter<int32_t>("Nbinsx"),
450  psTTStub_ECDisc_2D.getParameter<double>("xmin"),
451  psTTStub_ECDisc_2D.getParameter<double>("xmax"),
452  psTTStub_ECDisc_2D.getParameter<int32_t>("Nbinsy"),
453  psTTStub_ECDisc_2D.getParameter<double>("ymin"),
454  psTTStub_ECDisc_2D.getParameter<double>("ymax"));
455  Stub_Endcap_Disc_W->setAxisTitle("Endcap Disc", 1);
456  Stub_Endcap_Disc_W->setAxisTitle("Displacement - Offset", 2);
457 
458  HistoName = "Stub_Width_Endcap_Ring";
459  Stub_Endcap_Ring_W = iBooker.book2D(HistoName,
460  HistoName,
461  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
462  psTTStub_ECRing_2D.getParameter<double>("xmin"),
463  psTTStub_ECRing_2D.getParameter<double>("xmax"),
464  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
465  psTTStub_ECRing_2D.getParameter<double>("ymin"),
466  psTTStub_ECRing_2D.getParameter<double>("ymax"));
467  Stub_Endcap_Ring_W->setAxisTitle("Endcap Ring", 1);
468  Stub_Endcap_Ring_W->setAxisTitle("Trigger Offset", 2);
469 
470  for (int i = 0; i < numDiscs; i++) {
471  HistoName = "Stub_Width_Disc+" + std::to_string(i + 1);
472  Stub_Endcap_Ring_W_Fw[i] = iBooker.book2D(HistoName,
473  HistoName,
474  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
475  psTTStub_ECRing_2D.getParameter<double>("xmin"),
476  psTTStub_ECRing_2D.getParameter<double>("xmax"),
477  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
478  psTTStub_ECRing_2D.getParameter<double>("ymin"),
479  psTTStub_ECRing_2D.getParameter<double>("ymax"));
480  Stub_Endcap_Ring_W_Fw[i]->setAxisTitle("Endcap Ring", 1);
481  Stub_Endcap_Ring_W_Fw[i]->setAxisTitle("Displacement - Offset", 2);
482  }
483 
484  for (int i = 0; i < numDiscs; i++) {
485  HistoName = "Stub_Width_Disc-" + std::to_string(i + 1);
486  Stub_Endcap_Ring_W_Bw[i] = iBooker.book2D(HistoName,
487  HistoName,
488  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
489  psTTStub_ECRing_2D.getParameter<double>("xmin"),
490  psTTStub_ECRing_2D.getParameter<double>("xmax"),
491  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
492  psTTStub_ECRing_2D.getParameter<double>("ymin"),
493  psTTStub_ECRing_2D.getParameter<double>("ymax"));
494  Stub_Endcap_Ring_W_Bw[i]->setAxisTitle("Endcap Ring", 1);
495  Stub_Endcap_Ring_W_Bw[i]->setAxisTitle("Displacement - Offset", 2);
496  }
497 
498  iBooker.setCurrentFolder(topFolderName_ + "/Stubs/Offset");
499  HistoName = "Stub_Offset_Barrel";
500  Stub_Barrel_O = iBooker.book2D(HistoName,
501  HistoName,
502  psTTStub_Barrel_2D.getParameter<int32_t>("Nbinsx"),
503  psTTStub_Barrel_2D.getParameter<double>("xmin"),
504  psTTStub_Barrel_2D.getParameter<double>("xmax"),
505  psTTStub_Barrel_2D.getParameter<int32_t>("Nbinsy"),
506  psTTStub_Barrel_2D.getParameter<double>("ymin"),
507  psTTStub_Barrel_2D.getParameter<double>("ymax"));
508  Stub_Barrel_O->setAxisTitle("Barrel Layer", 1);
509  Stub_Barrel_O->setAxisTitle("Trigger Offset", 2);
510 
511  HistoName = "Stub_Offset_Endcap_Disc";
512  Stub_Endcap_Disc_O = iBooker.book2D(HistoName,
513  HistoName,
514  psTTStub_ECDisc_2D.getParameter<int32_t>("Nbinsx"),
515  psTTStub_ECDisc_2D.getParameter<double>("xmin"),
516  psTTStub_ECDisc_2D.getParameter<double>("xmax"),
517  psTTStub_ECDisc_2D.getParameter<int32_t>("Nbinsy"),
518  psTTStub_ECDisc_2D.getParameter<double>("ymin"),
519  psTTStub_ECDisc_2D.getParameter<double>("ymax"));
520  Stub_Endcap_Disc_O->setAxisTitle("Endcap Disc", 1);
521  Stub_Endcap_Disc_O->setAxisTitle("Trigger Offset", 2);
522 
523  HistoName = "Stub_Offset_Endcap_Ring";
524  Stub_Endcap_Ring_O = iBooker.book2D(HistoName,
525  HistoName,
526  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
527  psTTStub_ECRing_2D.getParameter<double>("xmin"),
528  psTTStub_ECRing_2D.getParameter<double>("xmax"),
529  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
530  psTTStub_ECRing_2D.getParameter<double>("ymin"),
531  psTTStub_ECRing_2D.getParameter<double>("ymax"));
532  Stub_Endcap_Ring_O->setAxisTitle("Endcap Ring", 1);
533  Stub_Endcap_Ring_O->setAxisTitle("Trigger Offset", 2);
534 
535  for (int i = 0; i < numDiscs; i++) {
536  HistoName = "Stub_Offset_Disc+" + std::to_string(i + 1);
537  Stub_Endcap_Ring_O_Fw[i] = iBooker.book2D(HistoName,
538  HistoName,
539  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
540  psTTStub_ECRing_2D.getParameter<double>("xmin"),
541  psTTStub_ECRing_2D.getParameter<double>("xmax"),
542  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
543  psTTStub_ECRing_2D.getParameter<double>("ymin"),
544  psTTStub_ECRing_2D.getParameter<double>("ymax"));
545  Stub_Endcap_Ring_O_Fw[i]->setAxisTitle("Endcap Ring", 1);
546  Stub_Endcap_Ring_O_Fw[i]->setAxisTitle("Trigger Offset", 2);
547  }
548 
549  for (int i = 0; i < numDiscs; i++) {
550  HistoName = "Stub_Offset_Disc-" + std::to_string(i + 1);
551  Stub_Endcap_Ring_O_Bw[i] = iBooker.book2D(HistoName,
552  HistoName,
553  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
554  psTTStub_ECRing_2D.getParameter<double>("xmin"),
555  psTTStub_ECRing_2D.getParameter<double>("xmax"),
556  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
557  psTTStub_ECRing_2D.getParameter<double>("ymin"),
558  psTTStub_ECRing_2D.getParameter<double>("ymax"));
559  Stub_Endcap_Ring_O_Bw[i]->setAxisTitle("Endcap Ring", 1);
560  Stub_Endcap_Ring_O_Bw[i]->setAxisTitle("Trigger Offset", 2);
561  }
562 }

References dqm::implementation::IBooker::book1D(), dqm::implementation::IBooker::book2D(), conf_, edm::ParameterSet::getParameter(), mps_fire::i, dqm::impl::MonitorElement::setAxisTitle(), dqm::implementation::NavigatorBase::setCurrentFolder(), AlCaHLTBitMon_QueryRunRegistry::string, Stub_Barrel, Stub_Barrel_O, Stub_Barrel_W, Stub_Barrel_XY, Stub_bendBE, Stub_bendFE, Stub_bendOffset, Stub_Endcap_Bw_XY, Stub_Endcap_Disc, Stub_Endcap_Disc_Bw, Stub_Endcap_Disc_Fw, Stub_Endcap_Disc_O, Stub_Endcap_Disc_W, Stub_Endcap_Fw_XY, Stub_Endcap_Ring, Stub_Endcap_Ring_Bw, Stub_Endcap_Ring_Fw, Stub_Endcap_Ring_O, Stub_Endcap_Ring_O_Bw, Stub_Endcap_Ring_O_Fw, Stub_Endcap_Ring_W, Stub_Endcap_Ring_W_Bw, Stub_Endcap_Ring_W_Fw, Stub_Eta, Stub_isPS, Stub_Phi, Stub_R, Stub_rawBend, Stub_RZ, and topFolderName_.

Member Data Documentation

◆ conf_

edm::ParameterSet OuterTrackerMonitorTTStub::conf_
private

Definition at line 97 of file OuterTrackerMonitorTTStub.cc.

Referenced by bookHistograms(), and OuterTrackerMonitorTTStub().

◆ Stub_Barrel

MonitorElement* OuterTrackerMonitorTTStub::Stub_Barrel = nullptr

Definition at line 64 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Barrel_O

MonitorElement* OuterTrackerMonitorTTStub::Stub_Barrel_O = nullptr

Definition at line 84 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Barrel_W

MonitorElement* OuterTrackerMonitorTTStub::Stub_Barrel_W = nullptr

Definition at line 83 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Barrel_XY

MonitorElement* OuterTrackerMonitorTTStub::Stub_Barrel_XY = nullptr

Definition at line 58 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_bendBE

MonitorElement* OuterTrackerMonitorTTStub::Stub_bendBE = nullptr

Definition at line 77 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_bendFE

MonitorElement* OuterTrackerMonitorTTStub::Stub_bendFE = nullptr

Definition at line 76 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_bendOffset

MonitorElement* OuterTrackerMonitorTTStub::Stub_bendOffset = nullptr

Definition at line 79 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Bw_XY

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Bw_XY = nullptr

Definition at line 60 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Disc

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Disc = nullptr

Definition at line 65 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Disc_Bw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Disc_Bw = nullptr

Definition at line 67 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Disc_Fw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Disc_Fw = nullptr

Definition at line 66 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Disc_O

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Disc_O = nullptr

Definition at line 86 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Disc_W

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Disc_W = nullptr

Definition at line 85 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Fw_XY

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Fw_XY = nullptr

Definition at line 59 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring = nullptr

Definition at line 68 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_Bw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_Bw[5] = {nullptr, nullptr, nullptr, nullptr, nullptr}

Definition at line 70 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_Fw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_Fw[5] = {nullptr, nullptr, nullptr, nullptr, nullptr}

Definition at line 69 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_O

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_O = nullptr

Definition at line 88 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_O_Bw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_O_Bw[5] = {nullptr, nullptr, nullptr, nullptr, nullptr}

Definition at line 94 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_O_Fw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_O_Fw[5] = {nullptr, nullptr, nullptr, nullptr, nullptr}

Definition at line 91 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_W

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_W = nullptr

Definition at line 87 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_W_Bw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_W_Bw[5]
Initial value:
= {
nullptr, nullptr, nullptr, nullptr, nullptr}

Definition at line 92 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_W_Fw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_W_Fw[5]
Initial value:
= {
nullptr, nullptr, nullptr, nullptr, nullptr}

Definition at line 89 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Eta

MonitorElement* OuterTrackerMonitorTTStub::Stub_Eta = nullptr

Definition at line 73 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_isPS

MonitorElement* OuterTrackerMonitorTTStub::Stub_isPS = nullptr

Definition at line 80 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_Phi

MonitorElement* OuterTrackerMonitorTTStub::Stub_Phi = nullptr

Definition at line 74 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_R

MonitorElement* OuterTrackerMonitorTTStub::Stub_R = nullptr

Definition at line 75 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_rawBend

MonitorElement* OuterTrackerMonitorTTStub::Stub_rawBend = nullptr

Definition at line 78 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ Stub_RZ

MonitorElement* OuterTrackerMonitorTTStub::Stub_RZ = nullptr

Definition at line 61 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and bookHistograms().

◆ tagTTStubsToken_

edm::EDGetTokenT<edmNew::DetSetVector<TTStub<Ref_Phase2TrackerDigi_> > > OuterTrackerMonitorTTStub::tagTTStubsToken_
private

Definition at line 98 of file OuterTrackerMonitorTTStub.cc.

Referenced by analyze(), and OuterTrackerMonitorTTStub().

◆ topFolderName_

std::string OuterTrackerMonitorTTStub::topFolderName_
private

Definition at line 99 of file OuterTrackerMonitorTTStub.cc.

Referenced by bookHistograms(), and OuterTrackerMonitorTTStub().

OuterTrackerMonitorTTStub::Stub_Endcap_Ring_W_Bw
MonitorElement * Stub_Endcap_Ring_W_Bw[5]
Definition: OuterTrackerMonitorTTStub.cc:92
TrackerGeometry::idToDet
const TrackerGeomDet * idToDet(DetId) const override
Definition: TrackerGeometry.cc:193
edm::ESHandle::product
T const * product() const
Definition: ESHandle.h:86
Point2DBase
Definition: Point2DBase.h:9
mps_fire.i
i
Definition: mps_fire.py:428
OuterTrackerMonitorTTStub::tagTTStubsToken_
edm::EDGetTokenT< edmNew::DetSetVector< TTStub< Ref_Phase2TrackerDigi_ > > > tagTTStubsToken_
Definition: OuterTrackerMonitorTTStub.cc:98
GeomDet
Definition: GeomDet.h:27
PV3DBase::x
T x() const
Definition: PV3DBase.h:59
TrackerTopology
Definition: TrackerTopology.h:16
OuterTrackerMonitorTTStub::Stub_bendFE
MonitorElement * Stub_bendFE
Definition: OuterTrackerMonitorTTStub.cc:76
OuterTrackerMonitorTTStub::Stub_Endcap_Disc
MonitorElement * Stub_Endcap_Disc
Definition: OuterTrackerMonitorTTStub.cc:65
OuterTrackerMonitorTTStub::Stub_R
MonitorElement * Stub_R
Definition: OuterTrackerMonitorTTStub.cc:75
edmNew::makeRefTo
edm::Ref< typename HandleT::element_type, typename HandleT::element_type::value_type::value_type > makeRefTo(const HandleT &iHandle, typename HandleT::element_type::value_type::const_iterator itIter)
Definition: DetSetVectorNew.h:689
OuterTrackerMonitorTTStub::Stub_bendBE
MonitorElement * Stub_bendBE
Definition: OuterTrackerMonitorTTStub.cc:77
dqm::implementation::NavigatorBase::setCurrentFolder
virtual void setCurrentFolder(std::string const &fullpath)
Definition: DQMStore.cc:32
OuterTrackerMonitorTTStub::Stub_Barrel_O
MonitorElement * Stub_Barrel_O
Definition: OuterTrackerMonitorTTStub.cc:84
OuterTrackerMonitorTTStub::Stub_Endcap_Ring_O_Bw
MonitorElement * Stub_Endcap_Ring_O_Bw[5]
Definition: OuterTrackerMonitorTTStub.cc:94
TrackerTopology::layer
unsigned int layer(const DetId &id) const
Definition: TrackerTopology.cc:47
GeomDet::topology
virtual const Topology & topology() const
Definition: GeomDet.cc:67
edmNew::DetSetVector::begin
const_iterator begin(bool update=false) const
Definition: DetSetVectorNew.h:530
Topology::localPosition
virtual LocalPoint localPosition(const MeasurementPoint &) const =0
OuterTrackerMonitorTTStub::Stub_Barrel_XY
MonitorElement * Stub_Barrel_XY
Definition: OuterTrackerMonitorTTStub.cc:58
OuterTrackerMonitorTTStub::Stub_Endcap_Fw_XY
MonitorElement * Stub_Endcap_Fw_XY
Definition: OuterTrackerMonitorTTStub.cc:59
edm::Handle
Definition: AssociativeIterator.h:50
OuterTrackerMonitorTTStub::Stub_rawBend
MonitorElement * Stub_rawBend
Definition: OuterTrackerMonitorTTStub.cc:78
TtSemiLepEvtBuilder_cfi.disc
disc
Definition: TtSemiLepEvtBuilder_cfi.py:60
TrackerTopology::tidRing
unsigned int tidRing(const DetId &id) const
Definition: TrackerTopology.h:218
edm::Ref
Definition: AssociativeIterator.h:58
PV3DBase::z
T z() const
Definition: PV3DBase.h:61
OuterTrackerMonitorTTStub::conf_
edm::ParameterSet conf_
Definition: OuterTrackerMonitorTTStub.cc:97
DetId
Definition: DetId.h:17
GeomDet::surface
const Plane & surface() const
The nominal surface of the GeomDet.
Definition: GeomDet.h:37
edm::EventSetup::get
T get() const
Definition: EventSetup.h:80
TrackerDigiGeometryRecord
Definition: TrackerDigiGeometryRecord.h:15
dqm::impl::MonitorElement::Fill
void Fill(long long x)
Definition: MonitorElement.h:290
TTStub
Class to store the L1 Track Trigger stubs.
Definition: TTStub.h:22
Surface::toGlobal
GlobalPoint toGlobal(const Point2DBase< Scalar, LocalTag > lp) const
Definition: Surface.h:79
edm::ESHandle< TrackerTopology >
OuterTrackerMonitorTTStub::Stub_Phi
MonitorElement * Stub_Phi
Definition: OuterTrackerMonitorTTStub.cc:74
edmNew::DetSet
Definition: DetSetNew.h:22
OuterTrackerMonitorTTStub::topFolderName_
std::string topFolderName_
Definition: OuterTrackerMonitorTTStub.cc:99
Point3DBase< float, GlobalTag >
OuterTrackerMonitorTTStub::Stub_RZ
MonitorElement * Stub_RZ
Definition: OuterTrackerMonitorTTStub.cc:61
DetId::subdetId
constexpr int subdetId() const
get the contents of the subdetector field (not cast into any detector's numbering enum)
Definition: DetId.h:48
AlCaHLTBitMon_QueryRunRegistry.string
string
Definition: AlCaHLTBitMon_QueryRunRegistry.py:256
OuterTrackerMonitorTTStub::Stub_Endcap_Ring
MonitorElement * Stub_Endcap_Ring
Definition: OuterTrackerMonitorTTStub.cc:68
OuterTrackerMonitorTTStub::Stub_Endcap_Disc_Bw
MonitorElement * Stub_Endcap_Disc_Bw
Definition: OuterTrackerMonitorTTStub.cc:67
edm::ParameterSet
Definition: ParameterSet.h:47
OuterTrackerMonitorTTStub::Stub_bendOffset
MonitorElement * Stub_bendOffset
Definition: OuterTrackerMonitorTTStub.cc:79
OuterTrackerMonitorTTStub::Stub_Endcap_Disc_W
MonitorElement * Stub_Endcap_Disc_W
Definition: OuterTrackerMonitorTTStub.cc:85
PV3DBase::eta
T eta() const
Definition: PV3DBase.h:73
PV3DBase::y
T y() const
Definition: PV3DBase.h:60
OuterTrackerMonitorTTStub::Stub_Endcap_Ring_Bw
MonitorElement * Stub_Endcap_Ring_Bw[5]
Definition: OuterTrackerMonitorTTStub.cc:70
iEvent
int iEvent
Definition: GenABIO.cc:224
cscdqm::HistoName
std::string HistoName
Definition: CSCDQM_HistoDef.h:32
OuterTrackerMonitorTTStub::Stub_Endcap_Ring_W
MonitorElement * Stub_Endcap_Ring_W
Definition: OuterTrackerMonitorTTStub.cc:87
get
#define get
OuterTrackerMonitorTTStub::Stub_Eta
MonitorElement * Stub_Eta
Definition: OuterTrackerMonitorTTStub.cc:73
OuterTrackerMonitorTTStub::Stub_Endcap_Ring_O
MonitorElement * Stub_Endcap_Ring_O
Definition: OuterTrackerMonitorTTStub.cc:88
OuterTrackerMonitorTTStub::Stub_Endcap_Ring_W_Fw
MonitorElement * Stub_Endcap_Ring_W_Fw[5]
Definition: OuterTrackerMonitorTTStub.cc:89
edmNew::DetSetVector
Definition: DetSetNew.h:13
OuterTrackerMonitorTTStub::Stub_Endcap_Bw_XY
MonitorElement * Stub_Endcap_Bw_XY
Definition: OuterTrackerMonitorTTStub.cc:60
edmNew::DetSetVector::end
const_iterator end(bool update=false) const
Definition: DetSetVectorNew.h:535
OuterTrackerMonitorTTStub::Stub_Endcap_Disc_O
MonitorElement * Stub_Endcap_Disc_O
Definition: OuterTrackerMonitorTTStub.cc:86
dqm::implementation::IBooker::book2D
MonitorElement * book2D(TString const &name, TString const &title, int nchX, double lowX, double highX, int nchY, double lowY, double highY, FUNC onbooking=NOOP())
Definition: DQMStore.h:177
OuterTrackerMonitorTTStub::Stub_Endcap_Ring_Fw
MonitorElement * Stub_Endcap_Ring_Fw[5]
Definition: OuterTrackerMonitorTTStub.cc:69
relativeConstraints.ring
ring
Definition: relativeConstraints.py:68
StripSubdetector::TOB
static constexpr auto TOB
Definition: StripSubdetector.h:18
edm::ParameterSet::getParameter
T getParameter(std::string const &) const
Definition: ParameterSet.h:303
TrackerTopologyRcd
Definition: TrackerTopologyRcd.h:10
OuterTrackerMonitorTTStub::Stub_Endcap_Disc_Fw
MonitorElement * Stub_Endcap_Disc_Fw
Definition: OuterTrackerMonitorTTStub.cc:66
OuterTrackerMonitorTTStub::Stub_isPS
MonitorElement * Stub_isPS
Definition: OuterTrackerMonitorTTStub.cc:80
edm::HandleBase::isValid
bool isValid() const
Definition: HandleBase.h:70
dqm::impl::MonitorElement::setAxisTitle
virtual void setAxisTitle(const std::string &title, int axis=1)
set x-, y- or z-axis title (axis=1, 2, 3 respectively)
Definition: MonitorElement.cc:800
PV3DBase::perp
T perp() const
Definition: PV3DBase.h:69
edm::InputTag
Definition: InputTag.h:15
PV3DBase::phi
Geom::Phi< T > phi() const
Definition: PV3DBase.h:66
StripSubdetector::TID
static constexpr auto TID
Definition: StripSubdetector.h:17
dqm::implementation::IBooker::book1D
MonitorElement * book1D(TString const &name, TString const &title, int const nchX, double const lowX, double const highX, FUNC onbooking=NOOP())
Definition: DQMStore.h:98
OuterTrackerMonitorTTStub::Stub_Barrel_W
MonitorElement * Stub_Barrel_W
Definition: OuterTrackerMonitorTTStub.cc:83
TrackerGeometry
Definition: TrackerGeometry.h:14
OuterTrackerMonitorTTStub::Stub_Endcap_Ring_O_Fw
MonitorElement * Stub_Endcap_Ring_O_Fw[5]
Definition: OuterTrackerMonitorTTStub.cc:91
OuterTrackerMonitorTTStub::Stub_Barrel
MonitorElement * Stub_Barrel
Definition: OuterTrackerMonitorTTStub.cc:64
Generated for CMSSW Reference Manual by doxygen 1.8.16