TEcnaParHistos Class Reference

#include <TEcnaParHistos.h>

Inheritance diagram for TEcnaParHistos:

Public Member Functions
Float_t	AxisLabelOffset ()
Float_t	AxisLabelOffset (const TString &)
Float_t	AxisLabelSize ()
Float_t	AxisLabelSize (const TString &)
Float_t	AxisTickSize ()
Float_t	AxisTickSize (const TString &)
Float_t	AxisTitleOffset ()
Float_t	AxisTitleOffset (const TString &)
Float_t	AxisTitleSize ()
Float_t	AxisTitleSize (const TString &)
Double_t	BoxBottomY (const TString &)
Double_t	BoxLeftX (const TString &)
Double_t	BoxRightX (const TString &)
Double_t	BoxTopY (const TString &)
TString	BuildStandard1DHistoCodeX (const TString &, const TString &)
TString	BuildStandard1DHistoCodeXY (const TString &)
TString	BuildStandard1DHistoCodeY (const TString &, const TString &)
TString	BuildStandardBetweenWhatCode (const TString &, const TString &)
TString	BuildStandardCovOrCorCode (const TString &, const TString &)
TString	BuildStandardDetectorCode (const TString &)
TString	BuildStandardPlotOption (const TString &, const TString &)
UInt_t	CanvasFormatH (const TString &)
UInt_t	CanvasFormatW (const TString &)
Color_t	ColorDefinition (const TString &)
Color_t	ColorTab (const Int_t &)
Float_t	DeeNameOffsetX (const Int_t &)
Float_t	DeeNumberOffsetX (const TString &, const Int_t &)
Float_t	DeeOffsetX (const TString &, const Int_t &)
TString	GetCodeAllXtalsInStinPlot ()
TString	GetCodeOnlyOnePlot ()
Int_t	GetCodePlotAllXtalsInStin ()
TString	GetCodeSameOnePlot ()
TString	GetCodeSeveralPlot ()
TString	GetHistoType (const TString &)
Double_t	GetMarginAutoMinMax ()
Int_t	GetMaxNbOfColors ()
Int_t	GetNbOfRunsDisplayed ()
TString	GetQuantityName (const TString &)
TString	GetTechHistoCode (const TString &)
TString	GetTechHistoCode (const TString &, const TString &)
TString	GetXVarHisto (const TString &, const TString &, const Int_t &)
Double_t	GetYmaxDefaultValue (const TString &)
Double_t	GetYminDefaultValue (const TString &)
TString	GetYVarHisto (const TString &, const TString &, const Int_t &)
void	Init ()
void	ListOfStandardCodes (const TString &)
Int_t	MaxNbOfRunsInLists ()
UInt_t	SetCanvasHeight (const TString &, const TString &)
UInt_t	SetCanvasWidth (const TString &, const TString &)
void	SetColorPalette (const TString &)
Color_t	SetColorsForNumbers (const TString &)
void	SetEcalSubDetector (const TString &)
void	SetEcalSubDetector (const TString &, const TEcnaParEcal *, const TEcnaNumbering *)
TPaveText *	SetOptionSamePaveBorder (const TString &, const TString &)
TPaveText *	SetPaveAnalysisRun (const TString &, const Int_t &, const Int_t &, const TString &, const Int_t &, const Int_t &, const TString &)
TPaveText *	SetPaveCrystal (const Int_t &, const Int_t &, const Int_t &)
TPaveText *	SetPaveCrystal (const Int_t &, const Int_t &, const Int_t &, const Int_t &, const Int_t &)
TPaveText *	SetPaveCrystalSample (const Int_t &, const Int_t &, const Int_t &, const Int_t &)
TPaveText *	SetPaveCxyz (const Int_t &)
TPaveText *	SetPaveDee (const TString &, const Int_t &, const TString &)
TPaveText *	SetPaveEvolNbOfEvtsAna (const TString &, const Int_t &, const Int_t &, const Int_t &, const TString &)
TPaveText *	SetPaveEvolRuns (const Int_t &, const TString &, const Int_t &, const TString &, const TString &, const TString &)
TPaveText *	SetPaveGeneralComment (const TString &)
TPaveText *	SetPaveLVRB (const Int_t &, const Int_t &)
TPaveText *	SetPaveNbOfEvts (const Int_t &, const TString &, const TString &, const TString &)
TPaveText *	SetPaveSC (const Int_t &, const Int_t &)
TPaveText *	SetPaveSCsXY (const Int_t &, const Int_t &)
TPaveText *	SetPaveSM (const TString &, const Int_t &, const TString &)
TPaveText *	SetPaveStas ()
TPaveText *	SetPaveStex (const TString &, const Int_t &)
TPaveText *	SetPaveStin (const Int_t &, const Int_t &)
TPaveText *	SetPaveStinsXY (const Int_t &, const Int_t &)
TPaveText *	SetPaveTower (const Int_t &)
TPaveText *	SetPaveTowersXY (const Int_t &, const Int_t &)
void	SetViewGraphOffsets (TGraph *, const TString &)
void	SetViewHistoOffsets (TH1D *, const TString &, const TString &)
void	SetViewHistoPadMargins (const TString &, const TString &)
void	SetViewHistoStats (TH1D *, const TString &)
void	SetViewHistoStyle (const TString &)
	TEcnaParHistos ()
	TEcnaParHistos (const TString &, const TEcnaParEcal *, const TEcnaNumbering *)
	TEcnaParHistos (TEcnaObject *, const TString &)
	~TEcnaParHistos () override

Private Attributes
TString	fAllXtalsInStinPlot
Int_t	fCdelete
Int_t	fCdeleteRoot
Int_t	fCnaCommand
Int_t	fCnaError
Int_t	fCnew
Int_t	fCnewRoot
TEcnaParEcal *	fEcal
TEcnaNumbering *	fEcalNumbering
TString	fFlagSubDet
Int_t	fgMaxCar
Double_t	fMarginAutoMinMax
Int_t	fMaxColorNumber
Int_t	fMaxNbOfRunsInLists
Int_t	fNbOfRunsDisplayed
TString	fOnlyOnePlot
Int_t	fPlotAllXtalsInStin
TString	fSameOnePlot
TString	fSeveralPlot
TString	fTTBELL

Detailed Description

---

TEcnaParHistos.h Update: 05/10/2012 Author: B.Fabbro (berna.nosp@m.rd.f.nosp@m.abbro.nosp@m.@cea.nosp@m..fr) DSM/IRFU/SPP CEA-Saclay Copyright: Those valid for CEA sofware

ECNA web page: http://cms-fabbro.web.cern.ch/cms-fabbro/

cna_new/Correlated_Noise_Analysis/ECNA_main_page.htm

Values of different parameters for plots in the framework of TEcnaHistos
(see TEcnaHistos documentation)

Examples of parameters:  ymin and ymax values for histos, title sizes,
                         margins for plots, etc...

Definition at line 44 of file TEcnaParHistos.h.

Constructor & Destructor Documentation

TEcnaParHistos() [1/3]

TEcnaParHistos::TEcnaParHistos

(

)

Definition at line 32 of file TEcnaParHistos.cc.

                               {
  // Constructor without argument
 
  //std::cout << "[Info Management] CLASS: TEcnaParHistos.     CREATE OBJECT: this = " << this << std::endl;
 
  Init();
}

References Init().

TEcnaParHistos() [2/3]

TEcnaParHistos::TEcnaParHistos	(	TEcnaObject *	pObjectManager,
		const TString &	SubDet
	)

Definition at line 40 of file TEcnaParHistos.cc.

                                                                                 {
  // Constructor without argument
 
  //std::cout << "[Info Management] CLASS: TEcnaParHistos.     CREATE OBJECT: this = " << this << std::endl;
 
  Init();
  Long_t i_this = (Long_t)this;
  pObjectManager->RegisterPointer("TEcnaParHistos", i_this);
 
  //............................ fEcal  => to be changed in fParEcal
  fEcal = nullptr;
  Long_t iParEcal = pObjectManager->GetPointerValue("TEcnaParEcal");
  if (iParEcal == 0) {
    fEcal = new TEcnaParEcal(pObjectManager, SubDet.Data()); /*fCnew++*/
  } else {
    fEcal = (TEcnaParEcal*)iParEcal;
  }
 
  //............................ fEcalNumbering
  fEcalNumbering = nullptr;
  Long_t iEcalNumbering = pObjectManager->GetPointerValue("TEcnaNumbering");
  if (iEcalNumbering == 0) {
    fEcalNumbering = new TEcnaNumbering(pObjectManager, SubDet.Data()); /*fCnew++*/
  } else {
    fEcalNumbering = (TEcnaNumbering*)iEcalNumbering;
  }
 
  SetEcalSubDetector(SubDet.Data());
}

References fEcal, fEcalNumbering, TEcnaObject::GetPointerValue(), Init(), TEcnaObject::RegisterPointer(), SetEcalSubDetector(), and ntupleEnum::SubDet.

TEcnaParHistos() [3/3]

TEcnaParHistos::TEcnaParHistos	(	const TString &	SubDet,
		const TEcnaParEcal *	pEcal,
		const TEcnaNumbering *	pEcalNumbering
	)

Definition at line 70 of file TEcnaParHistos.cc.

                                                                                                                     {
  // Constructor with argument
 
  //std::cout << "[Info Management] CLASS: TEcnaParHistos.     CREATE OBJECT: this = " << this << std::endl;
 
  Init();
  SetEcalSubDetector(SubDet.Data(), pEcal, pEcalNumbering);
}

References Init(), SetEcalSubDetector(), and ntupleEnum::SubDet.

~TEcnaParHistos()

TEcnaParHistos::~TEcnaParHistos ( )

override

Definition at line 18 of file TEcnaParHistos.cc.

                                {
  //destructor
 
  //if (fEcalNumbering != 0){delete  fEcalNumbering; fCdelete++;}
  //if (fEcal          != 0){delete  fEcal;          fCdelete++;}
 
  //std::cout << "[Info Management] CLASS: TEcnaParHistos.     DESTROY OBJECT: this = " << this << std::endl;
}

Member Function Documentation

AxisLabelOffset() [1/2]

Float_t TEcnaParHistos::AxisLabelOffset

(

)

Definition at line 1282 of file TEcnaParHistos.cc.

{ return AxisLabelOffset(""); }

Referenced by TEcnaHistos::EEGridAxis(), TEcnaHistos::ViewEBGrid(), TEcnaHistos::ViewSCGrid(), TEcnaHistos::ViewSMGrid(), and TEcnaHistos::ViewTowerGrid().

AxisLabelOffset() [2/2]

Float_t TEcnaParHistos::AxisLabelOffset

(

const TString &

opt

)

Definition at line 1283 of file TEcnaParHistos.cc.

                                                          {
  Float_t lab_off = 0.02;
  if (opt == "") {
    lab_off = 0.02;
  }
 
  if (opt == "Towx") {
    lab_off = 0.01;
  }
  if (opt == "Towy") {
    lab_off = 0.03;
  }
  if (opt == "SMx") {
    lab_off = 0.01;
  }
  if (opt == "SMy") {
    lab_off = 0.015;
  }
  if (opt == "EBx") {
    lab_off = 0.03;
  }
  if (opt == "EBy") {
    lab_off = 0.015;
  }
 
  if (opt == "SCx") {
    lab_off = 0.01;
  }
  if (opt == "SCy") {
    lab_off = 0.03;
  }
  if (opt == "Deex") {
    lab_off = 0.002;
  }
  if (opt == "Deey") {
    lab_off = 0.03;
  }
  if (opt == "EEx") {
    lab_off = 0.015;
  }
  if (opt == "EEy") {
    lab_off = 0.02;
  }
 
  return lab_off;
}

References runTheMatrix::opt.

AxisLabelSize() [1/2]

Float_t TEcnaParHistos::AxisLabelSize

(

)

Definition at line 1330 of file TEcnaParHistos.cc.

{ return AxisLabelSize(""); }

Referenced by TEcnaHistos::EEGridAxis(), TEcnaHistos::ViewEBGrid(), TEcnaHistos::ViewSCGrid(), TEcnaHistos::ViewSMGrid(), and TEcnaHistos::ViewTowerGrid().

AxisLabelSize() [2/2]

Float_t TEcnaParHistos::AxisLabelSize

(

const TString &

opt

)

Definition at line 1331 of file TEcnaParHistos.cc.

                                                        {
  Float_t lab_siz = 0.035;
  if (opt == "SMx") {
    lab_siz = 0.05;
  }
  if (opt == "SMy") {
    lab_siz = 0.05;
  }
  if (opt == "EBx") {
    lab_siz = 0.04;
  }
  if (opt == "EBy") {
    lab_siz = 0.04;
  }
  return lab_siz;
}

References runTheMatrix::opt.

AxisTickSize() [1/2]

Float_t TEcnaParHistos::AxisTickSize

(

)

Definition at line 1348 of file TEcnaParHistos.cc.

{ return AxisTickSize(""); }

Referenced by TEcnaHistos::EEGridAxis(), TEcnaHistos::ViewEBGrid(), TEcnaHistos::ViewSCGrid(), TEcnaHistos::ViewSMGrid(), and TEcnaHistos::ViewTowerGrid().

AxisTickSize() [2/2]

Float_t TEcnaParHistos::AxisTickSize

(

const TString &

opt

)

Definition at line 1349 of file TEcnaParHistos.cc.

                                                       {
  //.......... works only with option "S" in TGaxis
  Float_t tic_siz = 0.;
  if (opt == "Dee") {
    tic_siz = 0.;
  }
  if (opt == "Deex") {
    tic_siz = 0.01;
  }
  if (opt == "Deey") {
    tic_siz = 0.02;
  }
  if (opt == "SMx") {
    tic_siz = 0.03;
  }
  if (opt == "SMy") {
    tic_siz = 0.0075;
  }
  if (opt == "EEx") {
    tic_siz = 0.06;
  }
  if (opt == "EEy") {
    tic_siz = 0.005;
  }
 
  return tic_siz;
}

References runTheMatrix::opt.

AxisTitleOffset() [1/2]

Float_t TEcnaParHistos::AxisTitleOffset

(

)

Definition at line 1222 of file TEcnaParHistos.cc.

{ return AxisTitleOffset(""); }

Referenced by TEcnaHistos::EEGridAxis(), TEcnaHistos::ViewEBGrid(), TEcnaHistos::ViewSCGrid(), TEcnaHistos::ViewSMGrid(), and TEcnaHistos::ViewTowerGrid().

AxisTitleOffset() [2/2]

Float_t TEcnaParHistos::AxisTitleOffset

(

const TString &

opt

)

Definition at line 1223 of file TEcnaParHistos.cc.

                                                          {
  Float_t tit_off = 1.;
 
  if (opt == "") {
    tit_off = 0.055;
  }
  if (opt == "Towx") {
    tit_off = 1.15;
  }
  if (opt == "Towy") {
    tit_off = 1.15;
  }
  if (opt == "SMx") {
    tit_off = 1.15;
  }
  if (opt == "SMy") {
    tit_off = 0.5;
  }
  if (opt == "SMyInEB") {
    tit_off = 0.7;
  }
  if (opt == "EBy") {
    tit_off = 1.;
  }
  if (opt == "EBx") {
    tit_off = 1.3;
  }
 
  if (opt == "SCx") {
    tit_off = 1.15;
  }
  if (opt == "SCy") {
    tit_off = 1.15;
  }
  if (opt == "Deex") {
    tit_off = 0.75;
  }
  if (opt == "Deey") {
    tit_off = 1.2;
  }
  if (opt == "EEx") {
    tit_off = 1.2;
  }
  if (opt == "EEy") {
    tit_off = 1.;
  }
 
  return tit_off;
}

References runTheMatrix::opt.

AxisTitleSize() [1/2]

Float_t TEcnaParHistos::AxisTitleSize

(

)

Definition at line 1273 of file TEcnaParHistos.cc.

{ return AxisTitleSize(""); }

Referenced by TEcnaHistos::EEGridAxis(), TEcnaHistos::ViewEBGrid(), TEcnaHistos::ViewSCGrid(), TEcnaHistos::ViewSMGrid(), and TEcnaHistos::ViewTowerGrid().

AxisTitleSize() [2/2]

Float_t TEcnaParHistos::AxisTitleSize

(

const TString &

opt

)

Definition at line 1274 of file TEcnaParHistos.cc.

                                                        {
  Float_t tit_siz = 0.045;
  if (opt == "") {
    tit_siz = 0.045;
  }
  return tit_siz;
}

References runTheMatrix::opt.

BoxBottomY()

Double_t TEcnaParHistos::BoxBottomY

(

const TString &

chtype

)

Definition at line 464 of file TEcnaParHistos.cc.

                                                         {
  //Set the y bottom coordinate of the box
 
  Double_t value = 0.8;
 
  if (chtype == "general_comment") {
    value = 0.960;
  }
 
  if (chtype == "top_left_box_SM") {
    value = 0.880;
  }
  if (chtype == "top_left_box_EB") {
    value = 0.880;
  }
  if (chtype == "top_mid_box_EB") {
    value = 0.880;
  }
  if (chtype == "top_right_box_EB") {
    value = 0.880;
  }
 
  if (chtype == "top_left_box_Dee") {
    value = 0.925;
  }
  if (chtype == "top_left_box_EE") {
    value = 0.880;
  }
  if (chtype == "top_mid_box_EE") {
    value = 0.880;
  }
  if (chtype == "top_right_box_EE") {
    value = 0.880;
  }
 
  if (chtype == "bottom_left_box") {
    value = 0.010;
  }
  if (chtype == "bottom_left_box_evol") {
    value = 0.010;
  }
  if (chtype == "bottom_right_box") {
    value = 0.010;
  }
  if (chtype == "bottom_right_box_evol") {
    value = 0.010;
  }
  if (chtype == "bottom_right_box_evpr") {
    value = 0.010;
  }
  if (chtype == "several_plots_box") {
    value = 0.010;
  }
  if (chtype == "several_evol_box") {
    value = 0.010;
  }
  if (chtype == "several_evpr_box") {
    value = 0.010;
  }
 
  return value;
}

References relativeConstraints::value.

Referenced by TEcnaHistos::DeeSCNumbering(), TEcnaHistos::HistimePlot(), TEcnaHistos::HistoPlot(), SetOptionSamePaveBorder(), SetPaveAnalysisRun(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveCxyz(), SetPaveDee(), SetPaveEvolNbOfEvtsAna(), SetPaveEvolRuns(), SetPaveGeneralComment(), SetPaveLVRB(), SetPaveNbOfEvts(), SetPaveSC(), SetPaveSCsXY(), SetPaveSM(), SetPaveStas(), SetPaveTower(), SetPaveTowersXY(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::ViewStas(), and TEcnaHistos::ViewStex().

BoxLeftX()

Double_t TEcnaParHistos::BoxLeftX

(

const TString &

chtype

)

Definition at line 330 of file TEcnaParHistos.cc.

                                                       {
  //Set the x left coordinate of the box
 
  Double_t value = 0.4;
 
  if (chtype == "general_comment") {
    value = 0.015;
  }
 
  if (chtype == "top_left_box_SM") {
    value = 0.015;
  }
  if (chtype == "top_left_box_EB") {
    value = 0.015;
  }
  if (chtype == "top_mid_box_EB") {
    value = 0.350;
  }
  if (chtype == "top_right_box_EB") {
    value = 0.630;
  }
 
  if (chtype == "top_left_box_Dee") {
    value = 0.015;
  }
  if (chtype == "top_left_box_EE") {
    value = 0.015;
  }
  if (chtype == "top_mid_box_EE") {
    value = 0.240;
  }
  if (chtype == "top_right_box_EE") {
    value = 0.610;
  }
 
  if (chtype == "bottom_left_box") {
    value = 0.015;
  }
  if (chtype == "bottom_left_box_evol") {
    value = 0.015;
  }
  if (chtype == "bottom_mid_box") {
    value = 0.250;
  }
  if (chtype == "bottom_right_box") {
    value = 0.455;
  }
  if (chtype == "bottom_right_box_evol") {
    value = 0.540;
  }
  if (chtype == "bottom_right_box_evpr") {
    value = 0.540;
  }
 
  if (chtype == "several_plots_box") {
    value = 0.015;
  }
  if (chtype == "several_evol_box") {
    value = 0.015;
  }
  if (chtype == "several_evpr_box") {
    value = 0.015;
  }
 
  return value;
}

References relativeConstraints::value.

Referenced by TEcnaHistos::DeeSCNumbering(), TEcnaHistos::HistimePlot(), TEcnaHistos::HistoPlot(), TEcnaHistos::SCCrystalNumbering(), SetOptionSamePaveBorder(), TEcnaHistos::SetParametersCanvas(), SetPaveAnalysisRun(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveCxyz(), SetPaveDee(), SetPaveEvolNbOfEvtsAna(), SetPaveEvolRuns(), SetPaveGeneralComment(), SetPaveLVRB(), SetPaveNbOfEvts(), SetPaveSC(), SetPaveSCsXY(), SetPaveSM(), SetPaveStas(), SetPaveTower(), SetPaveTowersXY(), TEcnaHistos::SMTowerNumbering(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::TowerCrystalNumbering(), TEcnaHistos::ViewMatrix(), TEcnaHistos::ViewStas(), TEcnaHistos::ViewStex(), and TEcnaHistos::ViewStin().

BoxRightX()

Double_t TEcnaParHistos::BoxRightX

(

const TString &

chtype

)

Definition at line 397 of file TEcnaParHistos.cc.

                                                        {
  //Set the x right coordinate of the box
 
  Double_t value = 0.6;
 
  if (chtype == "general_comment") {
    value = 0.680;
  }
 
  if (chtype == "top_left_box_SM") {
    value = 0.125;
  }
  if (chtype == "top_left_box_EB") {
    value = 0.349;
  }
  if (chtype == "top_mid_box_EB") {
    value = 0.629;
  }
  if (chtype == "top_right_box_EB") {
    value = 0.985;
  }
 
  if (chtype == "top_left_box_Dee") {
    value = 0.425;
  }
  if (chtype == "top_left_box_EE") {
    value = 0.260;
  }
  if (chtype == "top_mid_box_EE") {
    value = 0.609;
  }
  if (chtype == "top_right_box_EE") {
    value = 0.985;
  }
 
  if (chtype == "bottom_left_box") {
    value = 0.445;
  }
  if (chtype == "bottom_left_box_evol") {
    value = 0.450;
  }  // ex 370
  if (chtype == "bottom_mid_box") {
    value = 0.750;
  }
  if (chtype == "bottom_right_box") {
    value = 0.985;
  }
  if (chtype == "bottom_right_box_evol") {
    value = 0.985;
  }
  if (chtype == "bottom_right_box_evpr") {
    value = 0.985;
  }
 
  if (chtype == "several_plots_box") {
    value = 0.985;
  }
  if (chtype == "several_evol_box") {
    value = 0.635;
  }
  if (chtype == "several_evpr_box") {
    value = 0.635;
  }
 
  return value;
}

References relativeConstraints::value.

Referenced by TEcnaHistos::DeeSCNumbering(), TEcnaHistos::HistimePlot(), TEcnaHistos::HistoPlot(), SetOptionSamePaveBorder(), SetPaveAnalysisRun(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveCxyz(), SetPaveDee(), SetPaveEvolNbOfEvtsAna(), SetPaveEvolRuns(), SetPaveGeneralComment(), SetPaveLVRB(), SetPaveNbOfEvts(), SetPaveSC(), SetPaveSCsXY(), SetPaveSM(), SetPaveStas(), SetPaveTower(), SetPaveTowersXY(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::ViewStas(), and TEcnaHistos::ViewStex().

BoxTopY()

Double_t TEcnaParHistos::BoxTopY

(

const TString &

chtype

)

Definition at line 527 of file TEcnaParHistos.cc.

                                                      {
  //Set the y top coordinate of the box
 
  Double_t value = 0.9;
 
  if (chtype == "general_comment") {
    value = 0.999;
  }
 
  if (chtype == "top_left_box_SM") {
    value = 0.955;
  }
  if (chtype == "top_left_box_EB") {
    value = 0.955;
  }
  if (chtype == "top_mid_box_EB") {
    value = 0.955;
  }
  if (chtype == "top_right_box_EB") {
    value = 0.955;
  }
 
  if (chtype == "top_left_box_Dee") {
    value = 0.969;
  }
  if (chtype == "top_left_box_EE") {
    value = 0.955;
  }
  if (chtype == "top_mid_box_EE") {
    value = 0.955;
  }
  if (chtype == "top_right_box_EE") {
    value = 0.955;
  }
 
  if (chtype == "bottom_left_box") {
    value = 0.120;
  }
  if (chtype == "bottom_left_box_evol") {
    value = 0.120;
  }
  if (chtype == "bottom_right_box") {
    value = 0.120;
  }
  if (chtype == "bottom_right_box_Dee") {
    value = 0.100;
  }
 
  if (chtype == "bottom_right_box_evol") {
    value = 0.120;
  }
  if (chtype == "bottom_right_box_evpr") {
    value = 0.120;
  }
  if (chtype == "several_plots_box") {
    value = 0.200;
  }
  if (chtype == "several_evol_box") {
    value = 0.200;
  }
  if (chtype == "several_evpr_box") {
    value = 0.200;
  }
 
  return value;
}

References relativeConstraints::value.

Referenced by TEcnaHistos::DeeSCNumbering(), TEcnaHistos::HistimePlot(), TEcnaHistos::HistoPlot(), TEcnaHistos::SCCrystalNumbering(), SetOptionSamePaveBorder(), TEcnaHistos::SetParametersCanvas(), SetPaveAnalysisRun(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveCxyz(), SetPaveDee(), SetPaveEvolNbOfEvtsAna(), SetPaveEvolRuns(), SetPaveGeneralComment(), SetPaveLVRB(), SetPaveNbOfEvts(), SetPaveSC(), SetPaveSCsXY(), SetPaveSM(), SetPaveStas(), SetPaveTower(), SetPaveTowersXY(), TEcnaHistos::SMTowerNumbering(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::TowerCrystalNumbering(), TEcnaHistos::ViewMatrix(), TEcnaHistos::ViewStas(), TEcnaHistos::ViewStex(), and TEcnaHistos::ViewStin().

BuildStandard1DHistoCodeX()

TString TEcnaParHistos::BuildStandard1DHistoCodeX	(	const TString &	CallingMethod,
		const TString &	UserHistoCode
	)

Definition at line 3232 of file TEcnaParHistos.cc.

                                                                                                            {
  //........................... user code -> standard code
  TString StandardHistoCode = "?";
  if (CallingMethod == "1D" || CallingMethod == "2DS" || CallingMethod == "Time") {
    //======================================== Only X Quantity for 1D Histos
    if (UserHistoCode == "Tower" || UserHistoCode == "tower" || UserHistoCode == "tow" ||
        UserHistoCode == "Tower number" || UserHistoCode == "tower number" || UserHistoCode == "tow nb" ||
        UserHistoCode == "Tower#" || UserHistoCode == "tower#" || UserHistoCode == "tow#" || UserHistoCode == "Tow#" ||
        UserHistoCode == "Tow") {
      StandardHistoCode = "Tow";
    }
 
    if (UserHistoCode == "Super crystal" || UserHistoCode == "SuperCrystal" || UserHistoCode == "SuperXtal" ||
        UserHistoCode == "Super crystal number" || UserHistoCode == "SuperCrystalNumber" ||
        UserHistoCode == "SuperXtalNumber" || UserHistoCode == "Super crystal nb" || UserHistoCode == "SuperCrystal#" ||
        UserHistoCode == "SuperXtal#" || UserHistoCode == "SC#" || UserHistoCode == "SC") {
      StandardHistoCode = "SC";
    }
 
    if (UserHistoCode == "Crystal" || UserHistoCode == "crystal" || UserHistoCode == "Xtal" ||
        UserHistoCode == "Crystal number" || UserHistoCode == "crystal number" || UserHistoCode == "Xtal number" ||
        UserHistoCode == "Crystal#" || UserHistoCode == "crystal#" || UserHistoCode == "Xtal#" ||
        UserHistoCode == "Xtal") {
      StandardHistoCode = "Xtal";
    }
 
    if (StandardHistoCode == "Tow" || StandardHistoCode == "SC" || StandardHistoCode == "Xtal") {
      StandardHistoCode = "XtalORStin";
    }  // management by means of fFapStexNumber ( >0 => Xtal ; =0 => Tow .OR. SC )
 
    if (UserHistoCode == "Sample number" || UserHistoCode == "SampleNumber" || UserHistoCode == "Sample#" ||
        UserHistoCode == "Samp#" || UserHistoCode == "Sample" || UserHistoCode == "sample" || UserHistoCode == "Smp") {
      StandardHistoCode = "Smp";
    }
 
    if (UserHistoCode == "Event" || UserHistoCode == "event" || UserHistoCode == "Event number" ||
        UserHistoCode == "event number" || UserHistoCode == "EventNumber" || UserHistoCode == "Event#" ||
        UserHistoCode == "EvtNumber" || UserHistoCode == "Evt#" || UserHistoCode == "Evt number" ||
        UserHistoCode == "evt number" || UserHistoCode == "Evt") {
      StandardHistoCode = "Evt";
    }
 
    //======================================== X or Y Quantity for 1D Histos
    if (StandardHistoCode == "?") {
      StandardHistoCode = BuildStandard1DHistoCodeXY(UserHistoCode);
    }
  }
 
  //---------------------------------------------
  if (StandardHistoCode == "?") {
    std::cout << "*TEcnaParHistos::BuildStandard1DHistoCodeX(...)> UserHistoCode = " << UserHistoCode
              << " : code not found." << fTTBELL << std::endl;
 
    ListOfStandardCodes("1DHistoCodeX");
  }
  return StandardHistoCode;
}

References BuildStandard1DHistoCodeXY(), gather_cfg::cout, fTTBELL, and ListOfStandardCodes().

Referenced by TEcnaHistos::Plot1DHisto(), and TEcnaHistos::PlotHistory().

BuildStandard1DHistoCodeXY()

TString TEcnaParHistos::BuildStandard1DHistoCodeXY

(

const TString &

UserHistoCode

)

Definition at line 3331 of file TEcnaParHistos.cc.

                                                                               {
  //........................... user code -> standard code
  TString StandardHistoCode = "?";
 
  //======================================== X or Y Quantity for 1D Histos
  if (UserHistoCode == "Number of events" || UserHistoCode == "Nb of evts" || UserHistoCode == "NumberbOfEvents" ||
      UserHistoCode == "NbOfEvts" || UserHistoCode == "number of events" || UserHistoCode == "noe" ||
      UserHistoCode == "NOE" || UserHistoCode == " " || UserHistoCode == "")  // (default)
  {
    StandardHistoCode = "NOE";
  }
 
  if (UserHistoCode == "Pedestals" || UserHistoCode == "Pedestal" || UserHistoCode == "pedestals" ||
      UserHistoCode == "pedestal" || UserHistoCode == "ped" || UserHistoCode == "Ped") {
    StandardHistoCode = "Ped";
  }
 
  if (UserHistoCode == "Total noise" || UserHistoCode == "TotalNoise" || UserHistoCode == "total noise" ||
      UserHistoCode == "TN" || UserHistoCode == "tn" || UserHistoCode == "TNo") {
    StandardHistoCode = "TNo";
  }
 
  if (UserHistoCode == "Low frequency noise" || UserHistoCode == "LowFrequencyNoise" || UserHistoCode == "LF noise" ||
      UserHistoCode == "LFNoise" || UserHistoCode == "low frequency noise" || UserHistoCode == "lfn" ||
      UserHistoCode == "LFN") {
    StandardHistoCode = "LFN";
  }
 
  if (UserHistoCode == "High frequency noise" || UserHistoCode == "HighFrequencyNoise" || UserHistoCode == "HF noise" ||
      UserHistoCode == "HFNoise" || UserHistoCode == "high frequency noise" || UserHistoCode == "hfn" ||
      UserHistoCode == "HFN") {
    StandardHistoCode = "HFN";
  }
 
  if (UserHistoCode == "Mean correlations between samples" || UserHistoCode == "MeanCorrelationsBetweenSamples" ||
      UserHistoCode == "Correlations between samples" || UserHistoCode == "CorrelationsBetweenSamples" ||
      UserHistoCode == "Mean corss" || UserHistoCode == "MeanCorss" || UserHistoCode == "Corss" ||
      UserHistoCode == "corss" || UserHistoCode == "Css" || UserHistoCode == "css" ||
      UserHistoCode == "mean correlations between samples" || UserHistoCode == "mcs" || UserHistoCode == "MCs") {
    StandardHistoCode = "MCs";
  }
 
  if (UserHistoCode == "Sigma of correlations between samples" ||
      UserHistoCode == "SigmaOfCorrelationsBetweenSamples" || UserHistoCode == "Sigma corss" ||
      UserHistoCode == "SigmaCorss" || UserHistoCode == "SigCorss" || UserHistoCode == "sigcorss" ||
      UserHistoCode == "SCss" || UserHistoCode == "scss" || UserHistoCode == "sigma of correlations between samples" ||
      UserHistoCode == "scs" || UserHistoCode == "SCs") {
    StandardHistoCode = "SCs";
  }
 
  if (UserHistoCode == "Sample mean" || UserHistoCode == "SampleMean" || UserHistoCode == "Sample average" ||
      UserHistoCode == "SampleAverage" || UserHistoCode == "SampMean" || UserHistoCode == "SampAverage" ||
      UserHistoCode == "MSp") {
    StandardHistoCode = "MSp";
  }
 
  if (UserHistoCode == "Sample sigma" || UserHistoCode == "SampleSigma" || UserHistoCode == "Sigma of samples" ||
      UserHistoCode == "SigmaOfSamples" || UserHistoCode == "SampSigma" || UserHistoCode == "SSp") {
    StandardHistoCode = "SSp";
  }
 
  if (UserHistoCode == "date" || UserHistoCode == "Date" || UserHistoCode == "time" || UserHistoCode == "Time") {
    StandardHistoCode = "Time";
  }
 
  if (UserHistoCode == "ADC value" || UserHistoCode == "ADCValue" || UserHistoCode == "Adc value" ||
      UserHistoCode == "AdcValue" || UserHistoCode == "Sample ADC" || UserHistoCode == "SampleAdc" ||
      UserHistoCode == "ADC" || UserHistoCode == "Adc") {
    StandardHistoCode = "Adc";
  }
 
  //---------------------------------------------
  if (StandardHistoCode == "?") {
    std::cout << "*TEcnaParHistos::BuildStandard1DHistoCodeXY(...)> UserHistoCode = " << UserHistoCode
              << " : code not found." << fTTBELL << std::endl;
 
    ListOfStandardCodes("1DHistoCodeXY");
  }
  return StandardHistoCode;
}

References gather_cfg::cout, fTTBELL, and ListOfStandardCodes().

Referenced by BuildStandard1DHistoCodeX(), and BuildStandard1DHistoCodeY().

BuildStandard1DHistoCodeY()

TString TEcnaParHistos::BuildStandard1DHistoCodeY	(	const TString &	CallingMethod,
		const TString &	UserHistoCode
	)

Definition at line 3291 of file TEcnaParHistos.cc.

                                                                                                            {
  //........................... user code -> standard code
  TString StandardHistoCode = "?";
 
  if (CallingMethod == "1D" || CallingMethod == "2DS" || CallingMethod == "Time") {
    //======================================== Only Y Quantity for 1D Histos
    if (UserHistoCode == "Number of crystals" || UserHistoCode == "NumberOfCrystals" ||
        UserHistoCode == "Nb of crystals" || UserHistoCode == "NbOfCrystals" || UserHistoCode == "Number of xtals" ||
        UserHistoCode == "NumberOfXtals" || UserHistoCode == "Nb of xtals" || UserHistoCode == "NbOfXtals" ||
        UserHistoCode == "nox" || UserHistoCode == "NOX") {
      StandardHistoCode = "NOX";
    }
 
    if (UserHistoCode == "Number of samples" || UserHistoCode == "NumberOfSamples" ||
        UserHistoCode == "Nb of samples" || UserHistoCode == "NbOfSamples" || UserHistoCode == "nos" ||
        UserHistoCode == "NOS") {
      StandardHistoCode = "NOS";
    }
 
    if (UserHistoCode == "Number of runs" || UserHistoCode == "NumberOfRuns" || UserHistoCode == "Nb of runs" ||
        UserHistoCode == "NbOfRuns" || UserHistoCode == "nor" || UserHistoCode == "NOR") {
      StandardHistoCode = "NOR";
    }
 
    //======================================== X or Y Quantity for 1D Histos
    if (StandardHistoCode == "?") {
      StandardHistoCode = BuildStandard1DHistoCodeXY(UserHistoCode);
    }
  }
  //---------------------------------------------
  if (StandardHistoCode == "?") {
    std::cout << "*TEcnaParHistos::BuildStandard1DHistoCodeY(...)> UserHistoCode = " << UserHistoCode
              << " : code not found." << fTTBELL << std::endl;
 
    ListOfStandardCodes("1DHistoCodeY");
  }
  return StandardHistoCode;
}

References BuildStandard1DHistoCodeXY(), gather_cfg::cout, fTTBELL, and ListOfStandardCodes().

Referenced by TEcnaHistos::Plot1DHisto(), TEcnaHistos::PlotDetector(), TEcnaHistos::PlotHistory(), and TEcnaRead::Read1DHisto().

BuildStandardBetweenWhatCode()

TString TEcnaParHistos::BuildStandardBetweenWhatCode	(	const TString &	CallingMethod,
		const TString &	UserHistoCode
	)

Definition at line 3442 of file TEcnaParHistos.cc.

                                                                                                               {
  //........................... user code -> standard code
  TString StandardHistoCode = "?";
  if (CallingMethod == "2D") {
    //======================================== Quantity for correlations (BetweenWhat)
    if (UserHistoCode == "Samples" || UserHistoCode == "Between samples" || UserHistoCode == "samples" ||
        UserHistoCode == "between samples" || UserHistoCode == "BetweenSamples" || UserHistoCode == "Samp" ||
        UserHistoCode == "samp" || UserHistoCode == "ss" || UserHistoCode == "Mss") {
      StandardHistoCode = "Mss";
    }
 
    if (UserHistoCode == "LF channels" || UserHistoCode == "LF between channels" || UserHistoCode == "LFChannels" ||
        UserHistoCode == "LFBetweenChannels" || UserHistoCode == "LFChan" || UserHistoCode == "lfchan" ||
        UserHistoCode == "LFcc" || UserHistoCode == "lfcc" || UserHistoCode == "MccLF") {
      StandardHistoCode = "MccLF";
    }
 
    if (UserHistoCode == "HF channels" || UserHistoCode == "HF between channels" || UserHistoCode == "HFChannels" ||
        UserHistoCode == "HFBetweenChannels" || UserHistoCode == "HFChan" || UserHistoCode == "hfchan" ||
        UserHistoCode == "HFcc" || UserHistoCode == "hfcc" || UserHistoCode == "MccHF") {
      StandardHistoCode = "MccHF";
    }
 
    if (UserHistoCode == "LF towers" || UserHistoCode == "LF between towers" || UserHistoCode == "LFTowers" ||
        UserHistoCode == "LFBetweenTowers" || UserHistoCode == "LFTow" || UserHistoCode == "lftow" ||
        UserHistoCode == "LFtt" || UserHistoCode == "lftt" || UserHistoCode == "LF SCs" ||
        UserHistoCode == "LF between SCs" || UserHistoCode == "LFSCs" || UserHistoCode == "LFBetweenSCs" ||
        UserHistoCode == "LFSuperXtals" || UserHistoCode == "lfsc" || UserHistoCode == "LFSC" ||
        UserHistoCode == "lfsx" || UserHistoCode == "MttLF") {
      StandardHistoCode = "MttLF";
    }
 
    if (UserHistoCode == "HF towers" || UserHistoCode == "HF between towers" || UserHistoCode == "HFTowers" ||
        UserHistoCode == "HFBetweenTowers" || UserHistoCode == "HFTow" || UserHistoCode == "hftow" ||
        UserHistoCode == "HFtt" || UserHistoCode == "hftt" || UserHistoCode == "HF SCs" ||
        UserHistoCode == "HF between SCs" || UserHistoCode == "HFSCs" || UserHistoCode == "HFBetweenSCs" ||
        UserHistoCode == "HFSuperXtals" || UserHistoCode == "hfsc" || UserHistoCode == "HFSC" ||
        UserHistoCode == "hfsx" || UserHistoCode == "MttHF") {
      StandardHistoCode = "MttHF";
    }
  }
 
  //---------------------------------------------
  if (StandardHistoCode == "?") {
    std::cout << "*TEcnaParHistos::BuildStandardBetweenWhatCode(...)> UserHistoCode = " << UserHistoCode
              << " : code not found." << fTTBELL << std::endl;
 
    ListOfStandardCodes("BetweenWhatCode");
  }
  return StandardHistoCode;
}

References gather_cfg::cout, fTTBELL, and ListOfStandardCodes().

Referenced by TEcnaHistos::PlotMatrix(), and TEcnaRead::ReadMatrix().

BuildStandardCovOrCorCode()

TString TEcnaParHistos::BuildStandardCovOrCorCode	(	const TString &	CallingMethod,
		const TString &	UserHistoCode
	)

Definition at line 3413 of file TEcnaParHistos.cc.

                                                                                                            {
  //........................... user code -> standard code
  TString StandardHistoCode = "?";
  if (CallingMethod == "2D") {
    //======================================== Correlation or covariance (CorOrCov)
    if (UserHistoCode == "Correlation" || UserHistoCode == "Correlations" || UserHistoCode == "correlation" ||
        UserHistoCode == "correlations" || UserHistoCode == "Correl" || UserHistoCode == "correl" ||
        UserHistoCode == "cor" || UserHistoCode == "Cor" || UserHistoCode == " " || UserHistoCode == "")  // (default)
    {
      StandardHistoCode = "Cor";
    }
 
    if (UserHistoCode == "Covariance" || UserHistoCode == "Covariances" || UserHistoCode == "covariance" ||
        UserHistoCode == "covariances" || UserHistoCode == "Covar" || UserHistoCode == "covar" ||
        UserHistoCode == "cov" || UserHistoCode == "Cov") {
      StandardHistoCode = "Cov";
    }
  }
  //---------------------------------------------
  if (StandardHistoCode == "?") {
    std::cout << "*TEcnaParHistos::BuildStandardCovOrCorCode(...)> UserHistoCode = " << UserHistoCode
              << " : code not found." << fTTBELL << std::endl;
 
    ListOfStandardCodes("CovOrCorCode");
  }
  return StandardHistoCode;
}

References gather_cfg::cout, fTTBELL, and ListOfStandardCodes().

Referenced by TEcnaHistos::PlotMatrix(), and TEcnaRead::ReadMatrix().

BuildStandardDetectorCode()

TString TEcnaParHistos::BuildStandardDetectorCode

(

const TString &

UserDetector

)

Definition at line 3113 of file TEcnaParHistos.cc.

                                                                             {
  TString StandardDetectorCode = "?";
 
  if (UserDetector == "Super-module" || UserDetector == "SuperModule" || UserDetector == "super-module" ||
      UserDetector == "SM" || UserDetector == " " || UserDetector == "")  // (default)
  {
    StandardDetectorCode = "SM";
  }
 
  if (UserDetector == "DEE" || UserDetector == "Dee") {
    StandardDetectorCode = "Dee";
  }
 
  if (UserDetector == "Ecal barrel" || UserDetector == "EcalBarrel" || UserDetector == "ecal barrel" ||
      UserDetector == "Barrel" || UserDetector == "barrel" || UserDetector == "EB") {
    StandardDetectorCode = "EB";
  }
 
  if (UserDetector == "Ecal endcap" || UserDetector == "EcalEndcap" || UserDetector == "ecal endcap" ||
      UserDetector == "Endcap" || UserDetector == "endcap" || UserDetector == "EE") {
    StandardDetectorCode = "EE";
  }
 
  if (StandardDetectorCode == "?") {
    std::cout << "*TEcnaParHistos::BuildStandardDetectorCode(...)> UserDetector = " << UserDetector
              << " : code not found." << fTTBELL << std::endl;
 
    ListOfStandardCodes("DetectorCode");
  }
  return StandardDetectorCode;
}

References gather_cfg::cout, fTTBELL, and ListOfStandardCodes().

Referenced by TEcnaHistos::Plot1DHisto(), TEcnaHistos::PlotDetector(), and TEcnaRead::Read1DHisto().

BuildStandardPlotOption()

TString TEcnaParHistos::BuildStandardPlotOption	(	const TString &	CallingMethod,
		const TString &	UserPlotOption
	)

Definition at line 3146 of file TEcnaParHistos.cc.

                                                                                                           {
  TString StandardPlotOption = "?";
 
  if (CallingMethod == "1D" || CallingMethod == "2DS" || CallingMethod == "Time") {
    if (UserPlotOption == "ONLY ONE" || UserPlotOption == "only one" || UserPlotOption == "onlyone" ||
        UserPlotOption == "Only one" || UserPlotOption == "OnlyOne" || UserPlotOption == "ONLYONE" ||
        UserPlotOption == fOnlyOnePlot || UserPlotOption == " " || UserPlotOption == "")  // (default)
    {
      StandardPlotOption = fOnlyOnePlot;
    }
 
    if (UserPlotOption == "SAME" || UserPlotOption == "Same" || UserPlotOption == fSeveralPlot) {
      StandardPlotOption = fSeveralPlot;
    }
 
    if (UserPlotOption == "SAME n" || UserPlotOption == "Same n" || UserPlotOption == fSameOnePlot) {
      StandardPlotOption = fSameOnePlot;
    }
 
    if (UserPlotOption == fAllXtalsInStinPlot)  // called with 1D after call with 1DX (special case "SAME in Stin")
    {
      StandardPlotOption = fAllXtalsInStinPlot;
    }
  }
 
  if (CallingMethod == "1DX") {
    if (UserPlotOption == "ALL XTALS IN TOWER" || UserPlotOption == "ALL CHANNELS IN TOWER" ||
        UserPlotOption == "AllXtalsInTower" || UserPlotOption == "AllChannelsInTower" ||
        UserPlotOption == "ALL XTALS IN TOW" || UserPlotOption == "ALL CHANNELS IN TOW" ||
        UserPlotOption == "AllXtalsInTow" || UserPlotOption == "AllChannelsInTow" ||
        UserPlotOption == "ALL XTALS IN SC" || UserPlotOption == "ALL CHANNELS IN SC" ||
        UserPlotOption == "AllXtalsInSC" || UserPlotOption == "AllChannelsInSC" || UserPlotOption == "SAME IN TOWER" ||
        UserPlotOption == "SameInTower" || UserPlotOption == "SAME IN TOW" || UserPlotOption == "SameInTow" ||
        UserPlotOption == "SAME IN SC" || UserPlotOption == "SameInSC" || UserPlotOption == "Same in tower" ||
        UserPlotOption == "Same in tow" || UserPlotOption == "Same in SC" || UserPlotOption == "SameInSC" ||
        UserPlotOption == fAllXtalsInStinPlot || UserPlotOption == " " || UserPlotOption == "")  // (default)
    {
      StandardPlotOption = fAllXtalsInStinPlot;
    }
  }
 
  if (CallingMethod == "2D") {
    if (UserPlotOption == "COLZ" || UserPlotOption == " " || UserPlotOption == "")  // (default)
    {
      StandardPlotOption = "COLZ";
    }
    if (UserPlotOption == "BOX") {
      StandardPlotOption = "BOX";
    }
    if (UserPlotOption == "TEXT") {
      StandardPlotOption = "TEXT";
    }
    if (UserPlotOption == "CONTZ") {
      StandardPlotOption = "CONTZ";
    }
    if (UserPlotOption == "LEGO2Z") {
      StandardPlotOption = "LEGO2Z";
    }
    if (UserPlotOption == "SURF1Z") {
      StandardPlotOption = "SURF1Z";
    }
    if (UserPlotOption == "SURF2Z") {
      StandardPlotOption = "SURF2Z";
    }
    if (UserPlotOption == "SURF3Z") {
      StandardPlotOption = "SURF3Z";
    }
    if (UserPlotOption == "SURF4") {
      StandardPlotOption = "SURF4";
    }
    if (UserPlotOption == "ASCII") {
      StandardPlotOption = "ASCII";
    }
  }
 
  //...................................................
  if (StandardPlotOption == "?") {
    std::cout << "*TEcnaParHistos::BuildStandardPlotOption(...)> UserPlotOption = " << UserPlotOption
              << " : code not found." << fTTBELL << std::endl;
 
    ListOfStandardCodes("PlotOption");
  }
  return StandardPlotOption;
}

References gather_cfg::cout, fAllXtalsInStinPlot, fOnlyOnePlot, fSameOnePlot, fSeveralPlot, fTTBELL, and ListOfStandardCodes().

Referenced by TEcnaHistos::Plot1DHisto(), TEcnaHistos::PlotHistory(), and TEcnaHistos::PlotMatrix().

CanvasFormatH()

UInt_t TEcnaParHistos::CanvasFormatH

(

const TString &

chformat

)

Definition at line 294 of file TEcnaParHistos.cc.

                                                            {
  //Set Canvas height
 
  UInt_t canv_h = 530;  // default = "petit"
 
  if (chformat == "petit") {
    canv_h = 530;
  }  // 21x29.7 portrait
  if (chformat == "moyen") {
    canv_h = 636;
  }  // 21x29.7 portrait
  if (chformat == "grand") {
    canv_h = 810;
  }  // 21x29.7 portrait
 
  if (chformat == "etaphiSM") {
    canv_h = 306;
  }  // landscape etroit en hauteur pour plot SM
  if (chformat == "phietaEB") {
    canv_h = 450;
  }  // landscape pour plot EB (32 SMs)
 
  if (chformat == "IXIYDee") {
    canv_h = 720;
  }  // portrait etroit en largeur pour plot Dee
  if (chformat == "IYIXEE") {
    canv_h = 450;
  }  // landscape pour plot EE (4 dees)
  return canv_h;
}

Referenced by TEcnaHistos::DeeSCNumbering(), TEcnaHistos::SCCrystalNumbering(), SetCanvasHeight(), SetCanvasWidth(), TEcnaHistos::SMTowerNumbering(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::TowerCrystalNumbering(), TEcnaHistos::ViewMatrix(), TEcnaHistos::ViewStas(), TEcnaHistos::ViewStex(), and TEcnaHistos::ViewStin().

CanvasFormatW()

UInt_t TEcnaParHistos::CanvasFormatW

(

const TString &

chformat

)

Definition at line 263 of file TEcnaParHistos.cc.

                                                            {
  //Set Canvas width
 
  UInt_t canv_w = 375;  // default = "petit"
 
  if (chformat == "petit") {
    canv_w = 375;
  }  // 21x29.7 portrait
  if (chformat == "moyen") {
    canv_w = 450;
  }  // 21x29.7 portrait
  if (chformat == "grand") {
    canv_w = 572;
  }  // 21x29.7 portrait
 
  if (chformat == "etaphiSM") {
    canv_w = 760;
  }  // landscape etroit en hauteur pour plot SM
  if (chformat == "phietaEB") {
    canv_w = 636;
  }  // landscape pour plot EB (32 SMs)
 
  if (chformat == "IXIYDee") {
    canv_w = 320;
  }  // portrait etroit en largeur pour plot Dee
  if (chformat == "IYIXEE") {
    canv_w = 636;
  }  // landscape pour plot EE (4 dees)
  return canv_w;
}

Referenced by TEcnaHistos::DeeSCNumbering(), TEcnaHistos::SCCrystalNumbering(), SetCanvasHeight(), SetCanvasWidth(), TEcnaHistos::SMTowerNumbering(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::TowerCrystalNumbering(), TEcnaHistos::ViewMatrix(), TEcnaHistos::ViewStas(), TEcnaHistos::ViewStex(), and TEcnaHistos::ViewStin().

ColorDefinition()

Color_t TEcnaParHistos::ColorDefinition

(

const TString &

chcolor

)

Definition at line 676 of file TEcnaParHistos.cc.

                                                              {
  //Set color from color name
 
  //=========> Color definition: see ROOT User's guide p.151
 
  Color_t couleur = 1;  // default = "noir"
 
  if (chcolor == "noir") {
    couleur = 1;
  }
  if (chcolor == "rouge") {
    couleur = 2;
  }
  if (chcolor == "vert_fonce") {
    couleur = 3;
  }
  if (chcolor == "bleu_fonce") {
    couleur = 4;
  }
  if (chcolor == "jaune") {
    couleur = 5;
  }
  if (chcolor == "rose") {
    couleur = 6;
  }
  if (chcolor == "bleu_clair") {
    couleur = 7;
  }
  if (chcolor == "vert") {
    couleur = 8;
  }
  if (chcolor == "bleu") {
    couleur = 9;
  }
  if (chcolor == "blanc") {
    couleur = 10;
  }
 
  if (chcolor == "marron23") {
    couleur = 23;
  }
  if (chcolor == "marron24") {
    couleur = 24;
  }
  if (chcolor == "marron25") {
    couleur = 24;
  }
  if (chcolor == "marron27") {
    couleur = 27;
  }
  if (chcolor == "marron28") {
    couleur = 28;
  }
 
  if (chcolor == "bleu33") {
    couleur = 33;
  }
  if (chcolor == "bleu36") {
    couleur = 36;
  }
  if (chcolor == "bleu38") {
    couleur = 38;
  }
  if (chcolor == "bleu39") {
    couleur = 39;
  }
 
  if (chcolor == "orange41") {
    couleur = 41;
  }
  if (chcolor == "orange42") {
    couleur = 42;
  }
 
  if (chcolor == "rouge44") {
    couleur = 44;
  }
  if (chcolor == "rouge46") {
    couleur = 46;
  }
  if (chcolor == "rouge47") {
    couleur = 47;
  }
  if (chcolor == "rouge48") {
    couleur = 48;
  }
  if (chcolor == "rouge49") {
    couleur = 49;
  }
  if (chcolor == "rouge50") {
    couleur = 50;
  }
 
  if (chcolor == "vert31") {
    couleur = 31;
  }
  if (chcolor == "vert32") {
    couleur = 32;
  }
  if (chcolor == "vert36") {
    couleur = 36;
  }
  if (chcolor == "vert37") {
    couleur = 37;
  }
 
  if (chcolor == "violet") {
    couleur = 49;
  }
 
  if (chcolor == "turquoise29") {
    couleur = 29;
  }
 
  if (chcolor == "gris12") {
    couleur = 12;
  }
  if (chcolor == "gris13") {
    couleur = 13;
  }
  if (chcolor == "gris14") {
    couleur = 14;
  }
  if (chcolor == "gris15") {
    couleur = 15;
  }
  if (chcolor == "gris16") {
    couleur = 16;
  }
  if (chcolor == "gris17") {
    couleur = 17;
  }
  if (chcolor == "gris18") {
    couleur = 18;
  }
 
  return couleur;
}

Referenced by ColorTab(), TEcnaHistos::EEDataSectors(), TEcnaHistos::GetSCColor(), TEcnaHistos::GetViewHistoColor(), TEcnaHistos::HistimePlot(), TEcnaHistos::HistoPlot(), TEcnaHistos::SCCrystalNumbering(), TEcnaHistos::SetAllPavesViewHisto(), TEcnaHistos::SetAllPavesViewStas(), TEcnaHistos::SetAllPavesViewStex(), SetColorsForNumbers(), SetPaveLVRB(), TEcnaHistos::SetViewGraphColors(), TEcnaHistos::SetViewHistoColors(), TEcnaHistos::ViewDeeSCNumberingPad(), TEcnaHistos::ViewEBGrid(), TEcnaHistos::ViewSMGrid(), and TEcnaHistos::ViewSMTowerNumberingPad().

ColorTab()

Color_t TEcnaParHistos::ColorTab

(

const Int_t &

user_color_number

)

Definition at line 613 of file TEcnaParHistos.cc.

                                                               {
  //Set color from user color number
 
  //=========> Color definition: see ROOT User's guide p.151
 
  TColor* my_color = new TColor();
 
  Color_t couleur = ColorDefinition("noir");  // default = "noir"
 
  if (fMaxColorNumber != 6) {
    //................... Standard: 6 colors (fMaxColorNumber = 5)
    if (user_color_number == 0) {
      couleur = ColorDefinition("noir");
    }  //    noir        black    1
    if (user_color_number == 1) {
      couleur = ColorDefinition("rouge");
    }  //    rouge       red      2
    if (user_color_number == 2) {
      couleur = ColorDefinition("bleu");
    }  //    bleu        blue     9
    if (user_color_number == 3) {
      couleur = (Color_t)my_color->GetColor("#009900");
    }  //    vert        green
    if (user_color_number == 4) {
      couleur = ColorDefinition("marron28");
    }  //    marron 28   braun   28
    if (user_color_number == 5) {
      couleur = (Color_t)my_color->GetColor("#9900BB");
    }  //    violet      purple
  }
  if (fMaxColorNumber == 6) {
    //................... Rainbow:7  colors (fMaxColorNumber = 6)
    if (user_color_number == 0) {
      couleur = (Color_t)my_color->GetColor("#EE0000");
    }  //   rouge
    if (user_color_number == 1) {
      couleur = (Color_t)my_color->GetColor("#FF6611");
    }  //   orange
    if (user_color_number == 2) {
      couleur = (Color_t)my_color->GetColor("#FFCC00");
    }  //   jaune
    if (user_color_number == 3) {
      couleur = (Color_t)my_color->GetColor("#009900");
    }  //   vert
    if (user_color_number == 4) {
      couleur = (Color_t)my_color->GetColor("#0044EE");
    }  //   bleu
    if (user_color_number == 5) {
      couleur = (Color_t)my_color->GetColor("#6633BB");
    }  //   indigo
    if (user_color_number == 6) {
      couleur = (Color_t)my_color->GetColor("#9900BB");
    }  //   violet
  }
 
  if (user_color_number < 0 || user_color_number > fMaxColorNumber) {
    couleur = 0;
  }
 
  return couleur;
}

References ColorDefinition(), and fMaxColorNumber.

Referenced by TEcnaHistos::GetViewHistoColor(), TEcnaHistos::SetViewGraphColors(), and TEcnaHistos::SetViewHistoColors().

DeeNameOffsetX()

Float_t TEcnaParHistos::DeeNameOffsetX

(

const Int_t &

DeeNumber

)

Definition at line 1428 of file TEcnaParHistos.cc.

                                                             {
  Float_t offset = 0;
 
  if (DeeNumber == 1) {
    offset = 8.;
  }
  if (DeeNumber == 2) {
    offset = 0.;
  }
  if (DeeNumber == 3) {
    offset = 7.6;
  }
  if (DeeNumber == 4) {
    offset = -0.5;
  }
 
  return offset;
}

References hltrates_dqm_sourceclient-live_cfg::offset.

Referenced by TEcnaHistos::EEDataSectors().

DeeNumberOffsetX()

Float_t TEcnaParHistos::DeeNumberOffsetX	(	const TString &	opt_plot,
		const Int_t &	DeeNumber
	)

Definition at line 1447 of file TEcnaParHistos.cc.

                                                                                        {
  Float_t offset = 0;
 
  if (opt_plot == "Dee") {
    if (DeeNumber == 1) {
      offset = 2.5;
    }
    if (DeeNumber == 2) {
      offset = 41.5;
    }
    if (DeeNumber == 3) {
      offset = 2.5;
    }
    if (DeeNumber == 4) {
      offset = 41.5;
    }
  }
  if (opt_plot == "EE") {
    if (DeeNumber == 1) {
      offset = 0.42;
    }
    if (DeeNumber == 2) {
      offset = 8.15;
    }
    if (DeeNumber == 3) {
      offset = 0.42;
    }
    if (DeeNumber == 4) {
      offset = 8.15;
    }
  }
  return offset;
}

References hltrates_dqm_sourceclient-live_cfg::offset.

Referenced by TEcnaHistos::EEDataSectors().

DeeOffsetX()

Float_t TEcnaParHistos::DeeOffsetX	(	const TString &	opt_plot,
		const Int_t &	DeeNumber
	)

Definition at line 1404 of file TEcnaParHistos.cc.

                                                                                  {
  Float_t offset = 0;
  if (opt_plot == "Dee") {
    offset = 0;
  }
  if (opt_plot == "EE") {
    Double_t vertic_empty_strip_1 = 1.;
    if (DeeNumber == 1) {
      offset = vertic_empty_strip_1 + fEcal->MaxStinHocoInStex() + 2 * fEcal->MaxStinHocoInStex() + 1.;
    }
    if (DeeNumber == 2) {
      offset = vertic_empty_strip_1 + 2 * fEcal->MaxStinHocoInStex() + 1.;
    }
    if (DeeNumber == 3) {
      offset = vertic_empty_strip_1 + fEcal->MaxStinHocoInStex();
    }
    if (DeeNumber == 4) {
      offset = vertic_empty_strip_1 + 0.;
    }
  }
  return offset;
}

References fEcal, TEcnaParEcal::MaxStinHocoInStex(), and hltrates_dqm_sourceclient-live_cfg::offset.

Referenced by TEcnaHistos::EEDataSectors(), TEcnaHistos::EEGridAxis(), and TEcnaHistos::GetXStinInStas().

GetCodeAllXtalsInStinPlot()

TString TEcnaParHistos::GetCodeAllXtalsInStinPlot

(

)

Definition at line 3740 of file TEcnaParHistos.cc.

{ return fAllXtalsInStinPlot; }

References fAllXtalsInStinPlot.

Referenced by TEcnaHistos::SetEcalSubDetector().

GetCodeOnlyOnePlot()

TString TEcnaParHistos::GetCodeOnlyOnePlot

(

)

Definition at line 3737 of file TEcnaParHistos.cc.

{ return fOnlyOnePlot; }

References fOnlyOnePlot.

Referenced by TEcnaHistos::SetEcalSubDetector().

GetCodePlotAllXtalsInStin()

Int_t TEcnaParHistos::GetCodePlotAllXtalsInStin

(

)

Definition at line 3741 of file TEcnaParHistos.cc.

{ return fPlotAllXtalsInStin; }

References fPlotAllXtalsInStin.

Referenced by TEcnaHistos::SetEcalSubDetector().

GetCodeSameOnePlot()

TString TEcnaParHistos::GetCodeSameOnePlot

(

)

Definition at line 3739 of file TEcnaParHistos.cc.

{ return fSameOnePlot; }

References fSameOnePlot.

Referenced by TEcnaHistos::SetEcalSubDetector().

GetCodeSeveralPlot()

TString TEcnaParHistos::GetCodeSeveralPlot

(

)

Definition at line 3738 of file TEcnaParHistos.cc.

{ return fSeveralPlot; }

References fSeveralPlot.

Referenced by TEcnaHistos::SetEcalSubDetector().

GetHistoType()

TString TEcnaParHistos::GetHistoType

(

const TString &

HistoCode

)

Definition at line 2440 of file TEcnaParHistos.cc.

                                                             {
  // Type of the quantity as a function of the quantity code
  // Histo type <=> Variable in X coordinate
 
  TString HistoType;
  Int_t MaxCar = fgMaxCar;
  HistoType.Resize(MaxCar);
  HistoType = "(no quantity type info)";
 
  //.(1a)............................ Global
  if (HistoCode == "D_NOE_ChNb" || HistoCode == "D_Ped_ChNb" || HistoCode == "D_TNo_ChNb" ||
      HistoCode == "D_LFN_ChNb" || HistoCode == "D_HFN_ChNb" || HistoCode == "D_MCs_ChNb" ||
      HistoCode == "D_SCs_ChNb") {
    HistoType = "Global";
  }  // X coordinate = Xtals for SM or Dee
     //                Tower for EB
     //                SC    for EE
  //.(1b)............................ Proj
  if (HistoCode == "D_NOE_ChDs" || HistoCode == "D_Ped_ChDs" || HistoCode == "D_TNo_ChDs" ||
      HistoCode == "D_LFN_ChDs" || HistoCode == "D_HFN_ChDs" || HistoCode == "D_MCs_ChDs" ||
      HistoCode == "D_SCs_ChDs") {
    HistoType = "Proj";
  }  // X coordinate = bin number
 
  //.(2)............................ H1Basic
  if (HistoCode == "D_MSp_SpNb" || HistoCode == "D_SSp_SpNb") {
    HistoType = "H1Basic";
  }  // X coordinate = sample number
 
  //.(2)............................ H1BasicProj
  if (HistoCode == "D_MSp_SpDs" || HistoCode == "D_SSp_SpDs") {
    HistoType = "H1BasicProj";
  }  // X coordinate = total noise
 
  //.(3a)............................ SampGlobal
  if (HistoCode == "D_Adc_EvNb") {
    HistoType = "SampGlobal";
  }  // X coordinate = event number
  //.(3b)............................ SampProj
  if (HistoCode == "D_Adc_EvDs") {
    HistoType = "SampProj";
  }  // X coordinate = bin number
 
  //.(4a)............................ Evol
  if (HistoCode == "H_Ped_Date" || HistoCode == "H_TNo_Date" || HistoCode == "H_MCs_Date" ||
      HistoCode == "H_LFN_Date" || HistoCode == "H_HFN_Date" || HistoCode == "H_SCs_Date") {
    HistoType = "Evol";
  }  // X coordinate = date
 
  //.(4b)............................ EvolProj
  if (HistoCode == "H_Ped_RuDs" || HistoCode == "H_TNo_RuDs" || HistoCode == "H_MCs_RuDs" ||
      HistoCode == "H_LFN_RuDs" || HistoCode == "H_HFN_RuDs" || HistoCode == "H_SCs_RuDs") {
    HistoType = "EvolProj";
  }  // X coordinate = bin number
 
  return HistoType;
}  // end of GetHistoType(...)

References fgMaxCar.

Referenced by TEcnaHistos::GetHistoNumberOfBins(), TEcnaHistos::GetOkViewHisto(), GetXVarHisto(), GetYVarHisto(), TEcnaHistos::SetAllPavesViewHisto(), TEcnaHistos::SetCanvasName(), TEcnaHistos::SetViewHistoColors(), TEcnaHistos::ViewHistime(), and TEcnaHistos::ViewHisto().

GetMarginAutoMinMax()

Double_t TEcnaParHistos::GetMarginAutoMinMax

(

)

Definition at line 821 of file TEcnaParHistos.cc.

{ return fMarginAutoMinMax; }

References fMarginAutoMinMax.

Referenced by TEcnaHistos::HistimePlot(), TEcnaHistos::ViewHistime(), and TEcnaHistos::ViewHisto().

GetMaxNbOfColors()

Int_t TEcnaParHistos::GetMaxNbOfColors

(

)

Definition at line 819 of file TEcnaParHistos.cc.

{ return fMaxColorNumber; }

References fMaxColorNumber.

Referenced by TEcnaHistos::SetViewGraphColors(), and TEcnaHistos::SetViewHistoColors().

GetNbOfRunsDisplayed()

Int_t TEcnaParHistos::GetNbOfRunsDisplayed

(

)

Definition at line 820 of file TEcnaParHistos.cc.

{ return fNbOfRunsDisplayed; }

References fNbOfRunsDisplayed.

Referenced by TEcnaHistos::HistimePlot().

GetQuantityName()

TString TEcnaParHistos::GetQuantityName

(

const TString &

chqcode

)

Definition at line 2647 of file TEcnaParHistos.cc.

                                                              {
  // Name of the quantity as a function of the histo code
 
  TString chqname;
  Int_t MaxCar = fgMaxCar;
  chqname.Resize(MaxCar);
  chqname = "(no quantity name info)";
 
  if (chqcode == "D_NOE_ChNb") {
    chqname = "Number of events";
  }
  if (chqcode == "D_NOE_ChDs") {
    chqname = "Nb of events";
  }
  if (chqcode == "D_Ped_ChNb") {
    chqname = "Pedestal";
  }
  if (chqcode == "D_Ped_ChDs") {
    chqname = "Pedestal";
  }
  if (chqcode == "D_TNo_ChNb") {
    chqname = "Total Noise";
  }
  if (chqcode == "D_TNo_ChDs") {
    chqname = "Total Noise";
  }
  if (chqcode == "D_MCs_ChNb") {
    chqname = "Mean Cor(s,s')";
  }
  if (chqcode == "D_MCs_ChDs") {
    chqname = "Mean Cor(s,s')";
  }
  if (chqcode == "D_LFN_ChNb") {
    chqname = "Low Freq. Noise";
  }
  if (chqcode == "D_LFN_ChDs") {
    chqname = "Low Freq. Noise";
  }
  if (chqcode == "D_HFN_ChNb") {
    chqname = "High Freq. Noise";
  }
  if (chqcode == "D_HFN_ChDs") {
    chqname = "High Freq. Noise";
  }
  if (chqcode == "D_SCs_ChNb") {
    chqname = "Sigma Cor(s,s')";
  }
  if (chqcode == "D_SCs_ChDs") {
    chqname = "Sigma Cor(s,s')";
  }
  if (chqcode == "D_MSp_SpNb") {
    chqname = "Sample means";
  }
  if (chqcode == "D_MSp_SpDs") {
    chqname = "Sample means";
  }
  if (chqcode == "D_SSp_SpNb") {
    chqname = "Sample sigmas";
  }
  if (chqcode == "D_SSp_SpDs") {
    chqname = "Sample sigmas";
  }
  if (chqcode == "D_Adc_EvNb") {
    chqname = "Sample ADC";
  }
  if (chqcode == "D_Adc_EvDs") {
    chqname = "Sample ADC distribution";
  }
  if (chqcode == "H_Ped_Date") {
    chqname = "Pedestal";
  }
  if (chqcode == "H_TNo_Date") {
    chqname = "Total Noise";
  }
  if (chqcode == "H_MCs_Date") {
    chqname = "Mean Cor(s,s')";
  }
  if (chqcode == "H_LFN_Date") {
    chqname = "Low Freq. Noise";
  }
  if (chqcode == "H_HFN_Date") {
    chqname = "High Freq. Noise";
  }
  if (chqcode == "H_SCs_Date") {
    chqname = "Sigma Cor(s,s')";
  }
  if (chqcode == "H_Ped_RuDs") {
    chqname = "Pedestal";
  }
  if (chqcode == "H_TNo_RuDs") {
    chqname = "Total Noise";
  }
  if (chqcode == "H_MCs_RuDs") {
    chqname = "Mean Cor(s,s')";
  }
  if (chqcode == "H_LFN_RuDs") {
    chqname = "Low Freq. Noise";
  }
  if (chqcode == "H_HFN_RuDs") {
    chqname = "High Freq. Noise";
  }
  if (chqcode == "H_SCs_RuDs") {
    chqname = "Sigma Cor(s,s')";
  }
  return chqname;
}

References fgMaxCar.

Referenced by TEcnaHistos::HistimePlot(), TEcnaHistos::HistoPlot(), TEcnaHistos::ViewHistime(), and TEcnaHistos::ViewHisto().

GetTechHistoCode() [1/2]

TString TEcnaParHistos::GetTechHistoCode

(

const TString &

StandardHistoCode

)

Definition at line 3585 of file TEcnaParHistos.cc.

                                                                         {
  TString TechHistoCode = "?";
 
  //.................... standard code -> technical code for ViewMatrix, ViewStex, ViewStas
  if (StandardHistoCode == "NOE") {
    TechHistoCode = "D_NOE_ChNb";
  }
  if (StandardHistoCode == "Ped") {
    TechHistoCode = "D_Ped_ChNb";
  }
  if (StandardHistoCode == "TNo") {
    TechHistoCode = "D_TNo_ChNb";
  }
  if (StandardHistoCode == "LFN") {
    TechHistoCode = "D_LFN_ChNb";
  }
  if (StandardHistoCode == "HFN") {
    TechHistoCode = "D_HFN_ChNb";
  }
  if (StandardHistoCode == "MCs") {
    TechHistoCode = "D_MCs_ChNb";
  }
  if (StandardHistoCode == "SCs") {
    TechHistoCode = "D_SCs_ChNb";
  }
 
  if (TechHistoCode == "?") {
    std::cout << "*TEcnaParHistos::GetTechHistoCode(...)> StandardHistoCode = " << StandardHistoCode
              << " : code not found " << fTTBELL << std::endl;
  }
  return TechHistoCode;
}

References gather_cfg::cout, and fTTBELL.

Referenced by TEcnaHistos::Plot1DHisto(), TEcnaHistos::PlotDetector(), and TEcnaHistos::PlotHistory().

GetTechHistoCode() [2/2]

TString TEcnaParHistos::GetTechHistoCode	(	const TString &	X_Quantity,
		const TString &	Y_Quantity
	)

Definition at line 3618 of file TEcnaParHistos.cc.

                                                                                             {
  //........................... (X,Y) standard codes -> technical code
  TString TechHistoCode = "?";
 
  //........................... Matrix or Histo type
  if (X_Quantity == "XtalORStin" && Y_Quantity == "NOE") {
    TechHistoCode = "D_NOE_ChNb";
  }
  if (X_Quantity == "XtalORStin" && Y_Quantity == "Ped") {
    TechHistoCode = "D_Ped_ChNb";
  }
  if (X_Quantity == "XtalORStin" && Y_Quantity == "TNo") {
    TechHistoCode = "D_TNo_ChNb";
  }
  if (X_Quantity == "XtalORStin" && Y_Quantity == "LFN") {
    TechHistoCode = "D_LFN_ChNb";
  }
  if (X_Quantity == "XtalORStin" && Y_Quantity == "HFN") {
    TechHistoCode = "D_HFN_ChNb";
  }
  if (X_Quantity == "XtalORStin" && Y_Quantity == "MCs") {
    TechHistoCode = "D_MCs_ChNb";
  }
  if (X_Quantity == "XtalORStin" && Y_Quantity == "SCs") {
    TechHistoCode = "D_SCs_ChNb";
  }
 
  if (X_Quantity == "NOE" && Y_Quantity == "NOX") {
    TechHistoCode = "D_NOE_ChDs";
  }
  if (X_Quantity == "Ped" && Y_Quantity == "NOX") {
    TechHistoCode = "D_Ped_ChDs";
  }
  if (X_Quantity == "TNo" && Y_Quantity == "NOX") {
    TechHistoCode = "D_TNo_ChDs";
  }
  if (X_Quantity == "LFN" && Y_Quantity == "NOX") {
    TechHistoCode = "D_LFN_ChDs";
  }
  if (X_Quantity == "HFN" && Y_Quantity == "NOX") {
    TechHistoCode = "D_HFN_ChDs";
  }
  if (X_Quantity == "MCs" && Y_Quantity == "NOX") {
    TechHistoCode = "D_MCs_ChDs";
  }
  if (X_Quantity == "SCs" && Y_Quantity == "NOX") {
    TechHistoCode = "D_SCs_ChDs";
  }
 
  if (X_Quantity == "Smp" && Y_Quantity == "MSp") {
    TechHistoCode = "D_MSp_SpNb";
  }
  if (X_Quantity == "MSp" && Y_Quantity == "NOS") {
    TechHistoCode = "D_MSp_SpDs";
  }
  if (X_Quantity == "Smp" && Y_Quantity == "SSp") {
    TechHistoCode = "D_SSp_SpNb";
  }
  if (X_Quantity == "SSp" && Y_Quantity == "NOS") {
    TechHistoCode = "D_SSp_SpDs";
  }
 
  if (X_Quantity == "Evt" && Y_Quantity == "Adc") {
    TechHistoCode = "D_Adc_EvNb";
  }
  if (X_Quantity == "Adc" && Y_Quantity == "NOE") {
    TechHistoCode = "D_Adc_EvDs";
  }
 
  //................................ Histime type
  if (X_Quantity == "Time" && Y_Quantity == "Ped") {
    TechHistoCode = "H_Ped_Date";
  }
  if (X_Quantity == "Ped" && Y_Quantity == "NOR") {
    TechHistoCode = "H_Ped_RuDs";
  }
 
  if (X_Quantity == "Time" && Y_Quantity == "TNo") {
    TechHistoCode = "H_TNo_Date";
  }
  if (X_Quantity == "TNo" && Y_Quantity == "NOR") {
    TechHistoCode = "H_TNo_RuDs";
  }
 
  if (X_Quantity == "Time" && Y_Quantity == "LFN") {
    TechHistoCode = "H_LFN_Date";
  }
  if (X_Quantity == "LFN" && Y_Quantity == "NOR") {
    TechHistoCode = "H_LFN_RuDs";
  }
 
  if (X_Quantity == "Time" && Y_Quantity == "HFN") {
    TechHistoCode = "H_HFN_Date";
  }
  if (X_Quantity == "HFN" && Y_Quantity == "NOR") {
    TechHistoCode = "H_HFN_RuDs";
  }
 
  if (X_Quantity == "Time" && Y_Quantity == "MCs") {
    TechHistoCode = "H_MCs_Date";
  }
  if (X_Quantity == "MCs" && Y_Quantity == "NOR") {
    TechHistoCode = "H_MCs_RuDs";
  }
 
  if (X_Quantity == "Time" && Y_Quantity == "SCs") {
    TechHistoCode = "H_SCs_Date";
  }
  if (X_Quantity == "SCs" && Y_Quantity == "NOR") {
    TechHistoCode = "H_SCs_RuDs";
  }
 
  if (TechHistoCode == "?") {
    std::cout << "TEcnaParHistos::GetTechHistoCode(...)> HistoCode not found. X_Quantity = " << X_Quantity
              << ", Y_Quantity = " << Y_Quantity << std::endl;
  }
  return TechHistoCode;
}

References gather_cfg::cout.

GetXVarHisto()

TString TEcnaParHistos::GetXVarHisto	(	const TString &	HistoCode,
		const TString &	SubDet,
		const Int_t &	StexNumber
	)

Definition at line 2498 of file TEcnaParHistos.cc.

                                                                                                             {
  // Type of the quantity as a function of the quantity code
  // Histo type <=> Variable in X coordinate
 
  TString HistoType = GetHistoType(HistoCode.Data());
 
  TString XVarHisto;
  Int_t MaxCar = fgMaxCar;
  XVarHisto.Resize(MaxCar);
  XVarHisto = "(no X variable info)";
 
  if (HistoType == "Global") {
    if (StexNumber == 0 && SubDet == "EB") {
      XVarHisto = "Tower number";
    }
    if (StexNumber == 0 && SubDet == "EE") {
      XVarHisto = "SC number";
    }
    if (StexNumber != 0) {
      XVarHisto = "Xtal number";
    }
  }
  if (HistoType == "Proj") {
    XVarHisto = "Bin number";
  }
 
  if (HistoType == "H1Basic") {
    XVarHisto = "Sample number";
  }
  if (HistoType == "H1BasicProj") {
    XVarHisto = "Total noise";
  }
 
  if (HistoType == "SampGlobal") {
    XVarHisto = "Event number";
  }
 
  if (HistoType == "SampProj") {
    XVarHisto = "ADC count";
  }
 
  if (HistoType == "Evol") {
    XVarHisto = "Date";
  }
 
  if (HistoType == "EvolProj") {
    XVarHisto = "Bin number";
  }
 
  return XVarHisto;
 
}  // end of GetXVarHisto(...)

References fgMaxCar, GetHistoType(), and ntupleEnum::SubDet.

Referenced by TEcnaHistos::ViewHistime(), and TEcnaHistos::ViewHisto().

GetYmaxDefaultValue()

Double_t TEcnaParHistos::GetYmaxDefaultValue

(

const TString &

chqcode

)

Definition at line 2872 of file TEcnaParHistos.cc.

                                                                   {
  Double_t vmax = (Double_t)0.;
 
  if (fFlagSubDet == "EB") {
    if (chqcode == "H2LFccMosMatrix") {
      vmax = (Double_t)1.;
    }
    if (chqcode == "H2HFccMosMatrix") {
      vmax = (Double_t)1.;
    }
    if (chqcode == "H2CorccInStins") {
      vmax = (Double_t)1.;
    }
 
    if (chqcode == "D_NOE_ChNb") {
      vmax = (Double_t)500.;
    }
    if (chqcode == "D_Ped_ChNb") {
      vmax = (Double_t)500.;
    }
    if (chqcode == "D_TNo_ChNb") {
      vmax = (Double_t)2.5;
    }
    if (chqcode == "D_LFN_ChNb") {
      vmax = (Double_t)2.5;
    }
    if (chqcode == "D_HFN_ChNb") {
      vmax = (Double_t)2.5;
    }
    if (chqcode == "D_MCs_ChNb") {
      vmax = (Double_t)1.;
    }
    if (chqcode == "D_SCs_ChNb") {
      vmax = (Double_t)1.5;
    }
 
    if (chqcode == "D_NOE_ChDs") {
      vmax = (Double_t)5000.;
    }
    if (chqcode == "D_Ped_ChDs") {
      vmax = (Double_t)5000.;
    }
    if (chqcode == "D_TNo_ChDs") {
      vmax = (Double_t)5000.;
    }
    if (chqcode == "D_LFN_ChDs") {
      vmax = (Double_t)5000.;
    }
    if (chqcode == "D_HFN_ChDs") {
      vmax = (Double_t)5000.;
    }
    if (chqcode == "D_MCs_ChDs") {
      vmax = (Double_t)5000.;
    }
    if (chqcode == "D_SCs_ChDs") {
      vmax = (Double_t)5000.;
    }
 
    if (chqcode == "D_MSp_SpNb") {
      vmax = (Double_t)500.;
    }
    if (chqcode == "D_MSp_SpDs") {
      vmax = (Double_t)10.;
    }
    if (chqcode == "D_SSp_SpNb") {
      vmax = (Double_t)5.;
    }
    if (chqcode == "D_SSp_SpDs") {
      vmax = (Double_t)10.;
    }
 
    if (chqcode == "D_Adc_EvNb") {
      vmax = (Double_t)500.;
    }
    if (chqcode == "D_Adc_EvDs") {
      vmax = (Double_t)150.;
    }
 
    if (chqcode == "H_Ped_Date") {
      vmax = (Double_t)500.;
    }
    if (chqcode == "H_TNo_Date") {
      vmax = (Double_t)5.;
    }
    if (chqcode == "H_LFN_Date") {
      vmax = (Double_t)5.;
    }
    if (chqcode == "H_HFN_Date") {
      vmax = (Double_t)5.;
    }
    if (chqcode == "H_MCs_Date") {
      vmax = (Double_t)1.;
    }
    if (chqcode == "H_SCs_Date") {
      vmax = (Double_t)0.5;
    }
 
    if (chqcode == "H_Ped_RuDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "H_TNo_RuDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "H_LFN_RuDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "H_HFN_RuDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "H_MCs_RuDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "H_SCs_RuDs") {
      vmax = (Double_t)1000.;
    }
  }
 
  if (fFlagSubDet == "EE") {
    if (chqcode == "H2LFccMosMatrix") {
      vmax = (Double_t)1.;
    }
    if (chqcode == "H2HFccMosMatrix") {
      vmax = (Double_t)1.;
    }
    if (chqcode == "H2CorccInStins") {
      vmax = (Double_t)0.05;
    }
 
    if (chqcode == "D_NOE_ChNb") {
      vmax = (Double_t)500.;
    }
    if (chqcode == "D_Ped_ChNb") {
      vmax = (Double_t)500.;
    }
    if (chqcode == "D_TNo_ChNb") {
      vmax = (Double_t)5.;
    }
    if (chqcode == "D_LFN_ChNb") {
      vmax = (Double_t)5.;
    }
    if (chqcode == "D_HFN_ChNb") {
      vmax = (Double_t)5.;
    }
    if (chqcode == "D_MCs_ChNb") {
      vmax = (Double_t)1.;
    }
    if (chqcode == "D_SCs_ChNb") {
      vmax = (Double_t)2.5;
    }
 
    if (chqcode == "D_NOE_ChDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "D_Ped_ChDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "D_TNo_ChDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "D_LFN_ChDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "D_HFN_ChDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "D_MCs_ChDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "D_SCs_ChDs") {
      vmax = (Double_t)1000.;
    }
 
    if (chqcode == "D_MSp_SpNb") {
      vmax = (Double_t)500.;
    }
    if (chqcode == "D_MSp_SpDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "D_SSp_SpNb") {
      vmax = (Double_t)5.;
    }
    if (chqcode == "D_SSp_SpDs") {
      vmax = (Double_t)100.;
    }
 
    if (chqcode == "D_Adc_EvNb") {
      vmax = (Double_t)500.;
    }
    if (chqcode == "D_Adc_EvDs") {
      vmax = (Double_t)1000.;
    }
 
    if (chqcode == "H_Ped_Date") {
      vmax = (Double_t)500.;
    }
    if (chqcode == "H_TNo_Date") {
      vmax = (Double_t)5.;
    }
    if (chqcode == "H_LFN_Date") {
      vmax = (Double_t)5.;
    }
    if (chqcode == "H_HFN_Date") {
      vmax = (Double_t)5.;
    }
    if (chqcode == "H_MCs_Date") {
      vmax = (Double_t)1.;
    }
    if (chqcode == "H_SCs_Date") {
      vmax = (Double_t)0.5;
    }
 
    if (chqcode == "H_Ped_RuDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "H_TNo_RuDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "H_LFN_RuDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "H_HFN_RuDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "H_MCs_RuDs") {
      vmax = (Double_t)1000.;
    }
    if (chqcode == "H_SCs_RuDs") {
      vmax = (Double_t)1000.;
    }
  }
  return vmax;
}

References fFlagSubDet.

Referenced by TEcnaHistos::SetAllYminYmaxMemoFromDefaultValues(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::ViewHistime(), TEcnaHistos::ViewHisto(), TEcnaHistos::ViewMatrix(), TEcnaHistos::ViewStas(), TEcnaHistos::ViewStex(), and TEcnaHistos::ViewStin().

GetYminDefaultValue()

Double_t TEcnaParHistos::GetYminDefaultValue

(

const TString &

chqcode

)

Definition at line 2754 of file TEcnaParHistos.cc.

                                                                   {
  Double_t vmin = (Double_t)0.;
 
  if (chqcode == "H2LFccMosMatrix") {
    vmin = (Double_t)-1.;
  }
  if (chqcode == "H2HFccMosMatrix") {
    vmin = (Double_t)-1.;
  }
  if (chqcode == "H2CorccInStins") {
    vmin = (Double_t)-1.;
  }
 
  if (chqcode == "D_NOE_ChNb") {
    vmin = (Double_t)0.;
  }
  if (chqcode == "D_Ped_ChNb") {
    vmin = (Double_t)0.;
  }
  if (chqcode == "D_TNo_ChNb") {
    vmin = (Double_t)0.;
  }
  if (chqcode == "D_MCs_ChNb") {
    vmin = (Double_t)-1.;
  }
  if (chqcode == "D_LFN_ChNb") {
    vmin = (Double_t)0.;
  }
  if (chqcode == "D_HFN_ChNb") {
    vmin = (Double_t)0.;
  }
  if (chqcode == "D_SCs_ChNb") {
    vmin = (Double_t)-1.;
  }
 
  if (chqcode == "D_NOE_ChDs") {
    vmin = (Double_t)0.1;
  }
  if (chqcode == "D_Ped_ChDs") {
    vmin = (Double_t)0.1;
  }
  if (chqcode == "D_TNo_ChDs") {
    vmin = (Double_t)0.1;
  }
  if (chqcode == "D_MCs_ChDs") {
    vmin = (Double_t)0.1;
  }
  if (chqcode == "D_LFN_ChDs") {
    vmin = (Double_t)0.1;
  }
  if (chqcode == "D_HFN_ChDs") {
    vmin = (Double_t)0.1;
  }
  if (chqcode == "D_SCs_ChDs") {
    vmin = (Double_t)0.1;
  }
 
  if (chqcode == "D_MSp_SpNb") {
    vmin = (Double_t)0.;
  }
  if (chqcode == "D_MSp_SpDs") {
    vmin = (Double_t)0.1;
  }
  if (chqcode == "D_SSp_SpNb") {
    vmin = (Double_t)0.;
  }
  if (chqcode == "D_SSp_SpDs") {
    vmin = (Double_t)0.1;
  }
 
  if (chqcode == "D_Adc_EvNb") {
    vmin = (Double_t)0.;
  }
  if (chqcode == "D_Adc_EvDs") {
    vmin = (Double_t)0.1;
  }
 
  if (chqcode == "H_Ped_Date") {
    vmin = (Double_t)0.;
  }
  if (chqcode == "H_TNo_Date") {
    vmin = (Double_t)0.;
  }
  if (chqcode == "H_MCs_Date") {
    vmin = (Double_t)-1.;
  }
  if (chqcode == "H_LFN_Date") {
    vmin = (Double_t)0.;
  }
  if (chqcode == "H_HFN_Date") {
    vmin = (Double_t)0.;
  }
  if (chqcode == "H_SCs_Date") {
    vmin = (Double_t)0.;
  }
 
  if (chqcode == "H_Ped_RuDs") {
    vmin = (Double_t)0.1;
  }
  if (chqcode == "H_TNo_RuDs") {
    vmin = (Double_t)0.1;
  }
  if (chqcode == "H_MCs_RuDs") {
    vmin = (Double_t)0.1;
  }
  if (chqcode == "H_LFN_RuDs") {
    vmin = (Double_t)0.1;
  }
  if (chqcode == "H_HFN_RuDs") {
    vmin = (Double_t)0.1;
  }
  if (chqcode == "H_SCs_RuDs") {
    vmin = (Double_t)0.1;
  }
 
  return vmin;
}

Referenced by TEcnaHistos::SetAllYminYmaxMemoFromDefaultValues(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::ViewHistime(), TEcnaHistos::ViewHisto(), TEcnaHistos::ViewMatrix(), TEcnaHistos::ViewStas(), TEcnaHistos::ViewStex(), and TEcnaHistos::ViewStin().

GetYVarHisto()

TString TEcnaParHistos::GetYVarHisto	(	const TString &	HistoCode,
		const TString &	SubDet,
		const Int_t &	StexNumber
	)

Definition at line 2551 of file TEcnaParHistos.cc.

                                                                                                             {
  // Type of the quantity as a function of the quantity code
  // Histo type <=> Variable in Y coordinate
 
  TString HistoType = GetHistoType(HistoCode.Data());
 
  TString YVarHisto;
  Int_t MaxCar = fgMaxCar;
  YVarHisto.Resize(MaxCar);
  YVarHisto = "(no Y variable info)";
 
  if (HistoType == "Global") {
    if (HistoCode == "D_NOE_ChNb") {
      YVarHisto = "Nb of events";
    }
    if (HistoCode == "D_Ped_ChNb") {
      YVarHisto = "Pedestal";
    }
    if (HistoCode == "D_TNo_ChNb") {
      YVarHisto = "Total Noise";
    }
    if (HistoCode == "D_MCs_ChNb") {
      YVarHisto = "Mean Cor(s,s')";
    }
    if (HistoCode == "D_LFN_ChNb") {
      YVarHisto = "Low Freq. Noise";
    }
    if (HistoCode == "D_HFN_ChNb") {
      YVarHisto = "High Freq. Noise";
    }
    if (HistoCode == "D_SCs_ChNb") {
      YVarHisto = "Sigma Cor(s,s')";
    }
  }
 
  if (HistoType == "Proj") {
    if (StexNumber == 0 && SubDet == "EB") {
      YVarHisto = "Number of towers";
    }
    if (StexNumber == 0 && SubDet == "EE") {
      YVarHisto = "Number of SCs";
    }
    if (StexNumber != 0) {
      YVarHisto = "Number of Xtals";
    }
  }
 
  if (HistoType == "H1Basic") {
    YVarHisto = "ADC count";
  }
  if (HistoType == "H1BasicProj") {
    YVarHisto = "Number of samples";
  }
 
  if (HistoType == "SampGlobal") {
    YVarHisto = "ADC count";
  }
 
  if (HistoType == "SampProj") {
    YVarHisto = "Number of events";
  }
 
  if (HistoType == "EvolProj") {
    YVarHisto = "Number of runs";
  }
 
  if (HistoType == "Evol") {
    if (HistoCode == "H_Ped_Date") {
      YVarHisto = "Pedestal";
    }
    if (HistoCode == "H_TNo_Date") {
      YVarHisto = "Total Noise";
    }
    if (HistoCode == "H_MCs_Date") {
      YVarHisto = "Mean Cor(s,s')";
    }
    if (HistoCode == "H_LFN_Date") {
      YVarHisto = "Low Freq. Noise";
    }
    if (HistoCode == "H_HFN_Date") {
      YVarHisto = "High Freq. Noise";
    }
    if (HistoCode == "H_SCs_Date") {
      YVarHisto = "Sigma Cor(s,s')";
    }
  }
 
  //  std::cout << std::endl << "*TEcnaParHistos::GetYVarHisto(...)> HistoType = " << HistoType
  //       << ", HistoCode = " << HistoCode
  //       << ", StexNumber = " << StexNumber
  //       << ", YVarHisto = " << YVarHisto << std::endl;
 
  return YVarHisto;
 
}  // end of GetYVarHisto(...)

References fgMaxCar, GetHistoType(), and ntupleEnum::SubDet.

Referenced by TEcnaHistos::ViewHistime(), and TEcnaHistos::ViewHisto().

Init()

void TEcnaParHistos::Init

(

void

)

Definition at line 79 of file TEcnaParHistos.cc.

                          {
  fgMaxCar = (Int_t)512;  // max number of characters in TStrings
 
  fTTBELL = '\007';
 
  //................ Init CNA Command and error numbering
  fCnaCommand = 0;
  fCnaError = 0;
 
  //........................................................................................
 
  fMaxColorNumber = (Int_t)4;  // number_of_colors - 1 for histos in option SAME
 
  fMarginAutoMinMax = (Double_t)0.05;  // factor for automatic margin plots:
                                       // plot min = min - (max-min)*fMarginAutoMinMax
                                       // plot max = max + (max-min)*fMarginAutoMinMax
 
  fNbOfRunsDisplayed = (Int_t)20;  // Nb of run numbers displayed on the top of the plot
                                   // in stability/evolution plots, option ONLYONE
 
  fMaxNbOfRunsInLists = (Int_t)5000;  // Maximum number of runs in the ListOfRun files
                                      // used for the stability/evolution plots.
 
  //........................ init code plot type                      (Init)
  Int_t MaxCar = fgMaxCar;
  fOnlyOnePlot.Resize(MaxCar);
  fOnlyOnePlot = "ONLYONE";
 
  MaxCar = fgMaxCar;
  fSeveralPlot.Resize(MaxCar);
  fSeveralPlot = "SAME";
 
  MaxCar = fgMaxCar;
  fSameOnePlot.Resize(MaxCar);
  fSameOnePlot = "SAME n";
 
  MaxCar = fgMaxCar;
  fAllXtalsInStinPlot.Resize(MaxCar);
  fAllXtalsInStinPlot = "SAME in Stin";
 
  fPlotAllXtalsInStin = 0;
 
}  // end of Init()

References fAllXtalsInStinPlot, fCnaCommand, fCnaError, fgMaxCar, fMarginAutoMinMax, fMaxColorNumber, fMaxNbOfRunsInLists, fNbOfRunsDisplayed, fOnlyOnePlot, fPlotAllXtalsInStin, fSameOnePlot, fSeveralPlot, and fTTBELL.

Referenced by TEcnaParHistos().

ListOfStandardCodes()

void TEcnaParHistos::ListOfStandardCodes

(

const TString &

TypeOfCode

)

Definition at line 3496 of file TEcnaParHistos.cc.

                                                                  {
  //------ Lists of Standard codes for Plot Histos methods
 
  if (TypeOfCode == "DetectorCode") {
    std::cout << "*--------------------------------------- Standard detector codes:" << std::endl;
    std::cout << "    EB   (ECAL Barrel) " << std::endl;
    std::cout << "    EE   (ECAL Endcap) " << std::endl;
    std::cout << "    SM   (Barrel Super Module) " << std::endl;
    std::cout << "    Dee  (Encap Dee) " << std::endl;
    std::cout << " Other codes are available" << std::endl;
    std::cout << " See source file: TEcnaParHistos::BuildStandardDetectorCode(...)." << std::endl;
    std::cout << "*----------------------------------------------------------------" << std::endl;
  }
 
  if (TypeOfCode == "PlotOption") {
    std::cout << "*--------------------------------------- Standard plot options:" << std::endl;
    std::cout << "    All ROOT DRAW options and: " << std::endl;
    std::cout << "   (nothing) " << std::endl;
    std::cout << "    SAME n   " << std::endl;
    std::cout << "    ASCII    " << std::endl;
    std::cout << " Other codes are available" << std::endl;
    std::cout << " See source file: TEcnaParHistos::BuildStandardPlotOption(...)." << std::endl;
    std::cout << "*--------------------------------------------------------------" << std::endl;
  }
 
  if (TypeOfCode == "1DHistoCodeX") {
    std::cout << "*---------------------- Standard 1D histo codes for X coordinate:" << std::endl;
    std::cout << "    Tow  (SM tower) " << std::endl;
    std::cout << "    SC   (Dee super crystal) " << std::endl;
    std::cout << "    Xtal (crystal) " << std::endl;
    std::cout << "    Smp  (Adc sample) " << std::endl;
    std::cout << "    Evt  (event) " << std::endl;
    std::cout << " Other codes are available" << std::endl;
    std::cout << " See source file: TEcnaParHistos::BuildStandard1DHistoCodeX(...)." << std::endl;
    std::cout << "*----------------------------------------------------------------" << std::endl;
  }
 
  if (TypeOfCode == "1DHistoCodeY") {
    std::cout << "*---------------------- Standard 1D histo codes for Y coordinate;" << std::endl;
    std::cout << "    NOX  (number of crystals) " << std::endl;
    std::cout << "    NOS  (number of samples) " << std::endl;
    std::cout << "    NOR  (number of runs) " << std::endl;
    std::cout << " Other codes are available" << std::endl;
    std::cout << " See source file: TEcnaParHistos::BuildStandard1DHistoCodeY(...)." << std::endl;
    std::cout << "*----------------------------------------------------------------" << std::endl;
  }
 
  if (TypeOfCode == "1DHistoCodeXY") {
    std::cout << "*------------------ Standard 1D histo codes for X or Y coordinate;" << std::endl;
    std::cout << "    NOE  (number of events) " << std::endl;
    std::cout << "    Ped  (pedestal) " << std::endl;
    std::cout << "    TNo  (total noise) " << std::endl;
    std::cout << "    LFN  (low frequency noise) " << std::endl;
    std::cout << "    HFN  (high frequency noise) " << std::endl;
    std::cout << "    MCs  (mean correlation between samples) " << std::endl;
    std::cout << "    SCs  (sigma of correlations between samples) " << std::endl;
    std::cout << "    MSp  (sample mean) " << std::endl;
    std::cout << "    SSp  (sample sigma) " << std::endl;
    std::cout << "    Time (time, date) " << std::endl;
    std::cout << "    Adc  (ADC sample value) " << std::endl;
    std::cout << " Other codes are available" << std::endl;
    std::cout << " See source file: TEcnaParHistos::BuildStandard1DHistoCodeXY(...)." << std::endl;
    std::cout << "*-----------------------------------------------------------------" << std::endl;
  }
 
  if (TypeOfCode == "CovOrCorCode") {
    std::cout << "*-------- Standard codes for matrix type (correlation or covariance);" << std::endl;
    std::cout << "    Cor  (correlation) " << std::endl;
    std::cout << "    cov  (covariance) " << std::endl;
    std::cout << " Other codes are available" << std::endl;
    std::cout << " See source file: TEcnaParHistos::BuildStandardCovOrCorCode(...)." << std::endl;
    std::cout << "*--------------------------------------------------------------------" << std::endl;
  }
 
  if (TypeOfCode == "BetweenWhatCode") {
    std::cout << "*-------- Standard codes for quantities in correlation or covariance;" << std::endl;
    std::cout << "    Mss    (between samples) " << std::endl;
    std::cout << "    MccLF  (low  frequency between channels) " << std::endl;
    std::cout << "    MccHF  (high frequency between channels) " << std::endl;
    std::cout << "    MttLF  (low  frequency between towers [if EB] or SC [if EE]) " << std::endl;
    std::cout << "    MttLF  (high frequency between towers [if EB] or SC [if EE]) " << std::endl;
    std::cout << " Other codes are available" << std::endl;
    std::cout << " See source file: TEcnaParHistos::BuildStandardBetweenWhatCode(...)." << std::endl;
    std::cout << "*--------------------------------------------------------------------" << std::endl;
  }
}

References gather_cfg::cout.

Referenced by BuildStandard1DHistoCodeX(), BuildStandard1DHistoCodeXY(), BuildStandard1DHistoCodeY(), BuildStandardBetweenWhatCode(), BuildStandardCovOrCorCode(), BuildStandardDetectorCode(), and BuildStandardPlotOption().

MaxNbOfRunsInLists()

Int_t TEcnaParHistos::MaxNbOfRunsInLists

(

)

Definition at line 157 of file TEcnaParHistos.cc.

{ return fMaxNbOfRunsInLists; }

References fMaxNbOfRunsInLists.

Referenced by TEcnaHistos::GetHistoryRunListParameters().

SetCanvasHeight()

UInt_t TEcnaParHistos::SetCanvasHeight	(	const TString &	HistoCode,
		const TString &	opt_plot
	)

Definition at line 236 of file TEcnaParHistos.cc.

                                                                                        {
  //........................................ Taille/format canvas
 
  UInt_t canv_h = CanvasFormatH("petit");
 
  if (HistoCode == "D_Adc_EvNb" || HistoCode == "D_NOE_ChNb" || HistoCode == "D_Ped_ChNb" ||
      HistoCode == "D_LFN_ChNb" || HistoCode == "D_TNo_ChNb" || HistoCode == "D_HFN_ChNb" ||
      HistoCode == "D_MCs_ChNb" || HistoCode == "D_SCs_ChNb" || HistoCode == "H_Ped_Date" ||
      HistoCode == "H_TNo_Date" || HistoCode == "H_MCs_Date" || HistoCode == "H_LFN_Date" ||
      HistoCode == "H_HFN_Date" || HistoCode == "H_SCs_Date" || (HistoCode == "D_MSp_SpNb" && opt_plot != "ONLYONE") ||
      (HistoCode == "D_SSp_SpNb" && opt_plot != "ONLYONE")) {
    canv_h = CanvasFormatW("moyen");  // format 29.7*21 ( = 21*29.7 en paysage)
  }
 
  if ((HistoCode == "D_Adc_EvDs" || HistoCode == "D_NOE_ChDs" || HistoCode == "D_Ped_ChDs" ||
       HistoCode == "D_LFN_ChDs" || HistoCode == "D_TNo_ChDs" || HistoCode == "D_HFN_ChDs" ||
       HistoCode == "D_MCs_ChDs" || HistoCode == "D_SCs_ChDs" || HistoCode == "D_MSp_SpDs" ||
       HistoCode == "D_SSp_SpDs" || HistoCode == "H_Ped_RuDs" || HistoCode == "H_TNo_RuDs" ||
       HistoCode == "H_MCs_RuDs" || HistoCode == "H_LFN_RuDs" || HistoCode == "H_HFN_RuDs" ||
       HistoCode == "H_SCs_RuDs") &&
      opt_plot != "ONLYONE") {
    canv_h = CanvasFormatW("moyen");  // format 29.7*21 ( = 21*29.7 en paysage)
  }
 
  return canv_h;
}

References CanvasFormatH(), and CanvasFormatW().

Referenced by TEcnaHistos::HistimePlot(), and TEcnaHistos::HistoPlot().

SetCanvasWidth()

UInt_t TEcnaParHistos::SetCanvasWidth	(	const TString &	HistoCode,
		const TString &	opt_plot
	)

Definition at line 209 of file TEcnaParHistos.cc.

                                                                                       {
  //........................................ Taille/format canvas
 
  UInt_t canv_w = CanvasFormatW("petit");
 
  if (HistoCode == "D_Adc_EvNb" || HistoCode == "D_NOE_ChNb" || HistoCode == "D_Ped_ChNb" ||
      HistoCode == "D_LFN_ChNb" || HistoCode == "D_TNo_ChNb" || HistoCode == "D_HFN_ChNb" ||
      HistoCode == "D_MCs_ChNb" || HistoCode == "D_SCs_ChNb" || HistoCode == "H_Ped_Date" ||
      HistoCode == "H_TNo_Date" || HistoCode == "H_MCs_Date" || HistoCode == "H_LFN_Date" ||
      HistoCode == "H_HFN_Date" || HistoCode == "H_SCs_Date" || (HistoCode == "D_MSp_SpNb" && opt_plot != "ONLYONE") ||
      (HistoCode == "D_SSp_SpNb" && opt_plot != "ONLYONE")) {
    canv_w = CanvasFormatH("moyen");  // format 29.7*21 ( = 21*29.7 en paysage)
  }
 
  if ((HistoCode == "D_Adc_EvDs" || HistoCode == "D_NOE_ChDs" || HistoCode == "D_Ped_ChDs" ||
       HistoCode == "D_LFN_ChDs" || HistoCode == "D_TNo_ChDs" || HistoCode == "D_HFN_ChDs" ||
       HistoCode == "D_MCs_ChDs" || HistoCode == "D_SCs_ChDs" || HistoCode == "D_MSp_SpDs" ||
       HistoCode == "D_SSp_SpDs" || HistoCode == "H_Ped_RuDs" || HistoCode == "H_TNo_RuDs" ||
       HistoCode == "H_MCs_RuDs" || HistoCode == "H_LFN_RuDs" || HistoCode == "H_HFN_RuDs" ||
       HistoCode == "H_SCs_RuDs") &&
      opt_plot != "ONLYONE") {
    canv_w = CanvasFormatH("moyen");  // format 29.7*21 ( = 21*29.7 en paysage)
  }
 
  return canv_w;
}

References CanvasFormatH(), and CanvasFormatW().

Referenced by TEcnaHistos::HistimePlot(), and TEcnaHistos::HistoPlot().

SetColorPalette()

void TEcnaParHistos::SetColorPalette

(

const TString &

user_color_palette

)

Definition at line 600 of file TEcnaParHistos.cc.

                                                                      {
  //Set color number for palette
 
  fMaxColorNumber = 4;  // default: 4 ==> Black/Red/Blue/Green/Braun
 
  if (!(user_color_palette == "Rainbow" || user_color_palette == "rainbow")) {
    fMaxColorNumber = 5;
  }
  if (user_color_palette == "Rainbow" || user_color_palette == "rainbow") {
    fMaxColorNumber = 6;
  }
}

References fMaxColorNumber.

Referenced by TEcnaHistos::ViewHistime(), and TEcnaHistos::ViewHisto().

SetColorsForNumbers()

Color_t TEcnaParHistos::SetColorsForNumbers

(

const TString &

chtype_number

)

Definition at line 2182 of file TEcnaParHistos.cc.

                                                                        {
  //Set color of the numbers for SuperModule- or Tower-  numbering plots
 
  Color_t couleur = ColorDefinition("noir");  // default = "noir"
 
  if (chtype_number == "crystal") {
    couleur = ColorDefinition("noir");
  }
  if (chtype_number == "lvrb_top") {
    couleur = ColorDefinition("rouge");
  }
  if (chtype_number == "lvrb_bottom") {
    couleur = ColorDefinition("bleu_fonce");
  }
 
  return couleur;
}

References ColorDefinition().

Referenced by SetPaveLVRB(), TEcnaHistos::TowerCrystalNumbering(), and TEcnaHistos::ViewSMTowerNumberingPad().

SetEcalSubDetector() [1/2]

void TEcnaParHistos::SetEcalSubDetector

(

const TString &

SubDet

)

Definition at line 123 of file TEcnaParHistos.cc.

                                                             {
  // Set Subdetector (EB or EE)
 
  Int_t MaxCar = fgMaxCar;
  fFlagSubDet.Resize(MaxCar);
  fFlagSubDet = fEcal->GetEcalSubDetector();
}

References fEcal, fFlagSubDet, fgMaxCar, and TEcnaParEcal::GetEcalSubDetector().

Referenced by TEcnaParHistos().

SetEcalSubDetector() [2/2]

void TEcnaParHistos::SetEcalSubDetector	(	const TString &	SubDet,
		const TEcnaParEcal *	pEcal,
		const TEcnaNumbering *	pEcalNumbering
	)

Definition at line 131 of file TEcnaParHistos.cc.

                                                                              {
  // Set Subdetector (EB or EE)
 
  fEcal = nullptr;
  if (pEcal == nullptr) {
    fEcal = new TEcnaParEcal(SubDet.Data()); /*fCnew++*/
    ;
  } else {
    fEcal = (TEcnaParEcal*)pEcal;
  }
 
  Int_t MaxCar = fgMaxCar;
  fFlagSubDet.Resize(MaxCar);
  fFlagSubDet = fEcal->GetEcalSubDetector();
 
  fEcalNumbering = nullptr;
  if (pEcalNumbering == nullptr) {
    fEcalNumbering = new TEcnaNumbering(fFlagSubDet.Data(), fEcal); /*fCnew++*/
    ;
  } else {
    fEcalNumbering = (TEcnaNumbering*)pEcalNumbering;
  }
}

References fEcal, fEcalNumbering, fFlagSubDet, fgMaxCar, TEcnaParEcal::GetEcalSubDetector(), and ntupleEnum::SubDet.

SetOptionSamePaveBorder()

TPaveText * TEcnaParHistos::SetOptionSamePaveBorder	(	const TString &	chopt,
		const TString &	HistoType
	)

Definition at line 1781 of file TEcnaParHistos.cc.

                                                                                                 {
  // Pave for plots with option SAME and SAME n.
  // Gives just the size/border and return the pointer to the Pave. No text.
  // The Pave text is drawn in TEcnaHistos.cc
 
  //.................................. DEFAULT OPTION: "several"
 
  Double_t pav_left_xgauche = BoxLeftX("several_plots_box");
  Double_t pav_left_xdroite = BoxRightX("several_plots_box");
  Double_t pav_left_ybas = BoxBottomY("several_plots_box");
  Double_t pav_left_yhaut = BoxTopY("several_plots_box");
 
  if (chopt == "sevevol") {
    pav_left_xgauche = BoxLeftX("several_evol_box");
    pav_left_xdroite = BoxRightX("several_evol_box");
    pav_left_ybas = BoxBottomY("several_evol_box");
    pav_left_yhaut = BoxTopY("several_evol_box");
 
    if (HistoType == "EvolProj") {
      pav_left_xgauche = BoxLeftX("several_evpr_box");
      pav_left_xdroite = BoxRightX("several_evpr_box");
      pav_left_ybas = BoxBottomY("several_evpr_box");
      pav_left_yhaut = BoxTopY("several_evpr_box");
    }
  }
 
  TPaveText* com_several = new TPaveText(pav_left_xgauche, pav_left_ybas, pav_left_xdroite, pav_left_yhaut);
  fCnewRoot++;
 
  return com_several;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), and fCnewRoot.

Referenced by TEcnaHistos::SetAllPavesViewHisto().

SetPaveAnalysisRun()

TPaveText * TEcnaParHistos::SetPaveAnalysisRun	(	const TString &	ana_type,
		const Int_t &	nb_of_samples,
		const Int_t &	run_number,
		const TString &	run_type,
		const Int_t &	first_evt,
		const Int_t &	last_evt,
		const TString &	nb_col
	)

Definition at line 1551 of file TEcnaParHistos.cc.

                                                                     {
  // Analysis name + Nb of samples + run number comment
 
  char f_in[fgMaxCar];
 
  //...................... Pave Analysis name/run number (bottom_left_box)
  Double_t pav_bot_left_xgauche = BoxLeftX("bottom_left_box");
  Double_t pav_bot_left_xdroite = BoxRightX("bottom_left_box");
  Double_t pav_bot_left_ybas = BoxBottomY("bottom_left_box");
  Double_t pav_bot_left_yhaut = BoxTopY("bottom_left_box");
 
  TPaveText* com_bot_left =
      new TPaveText(pav_bot_left_xgauche, pav_bot_left_ybas, pav_bot_left_xdroite, pav_bot_left_yhaut);
  fCnewRoot++;
 
  // (1 = left adjusted, 2 = centered adjusted, 3 = left adjusted), 2 = vertically centered
  Int_t cTextPaveAlign = 12;
  com_bot_left->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New) // 10*4  = 10*(ID4  = Arial)
  Int_t cTextPaveFont = 100;
  com_bot_left->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size
  Float_t cTextPaveSize = 0.025;
  com_bot_left->SetTextSize(cTextPaveSize);
  // Int_t   cTextPaveShadCol = 0;     com_bot_left->SetShadowColor(cTextPaveShadCol);
  Int_t cTextBorderSize = 1;
  com_bot_left->SetBorderSize(cTextBorderSize);
 
  if (nb_col == "TwoCol") {
    cTextPaveSize = 0.035;
    com_bot_left->SetTextSize(cTextPaveSize);
    snprintf(f_in, fgMaxCar, "Run:  %d                  Samples:   1 - %d", run_number, nb_of_samples);
    com_bot_left->AddText(f_in);
    cTextPaveSize = 0.035;
    com_bot_left->SetTextSize(cTextPaveSize);
    snprintf(f_in, fgMaxCar, "Type: %-20s", run_type.Data());
    com_bot_left->AddText(f_in);
    snprintf(f_in, fgMaxCar, "Analysis: %-10s         Evts range: %d - %d ", ana_type.Data(), first_evt, last_evt);
    com_bot_left->AddText(f_in);
  } else {
    cTextPaveSize = 0.0225;
    com_bot_left->SetTextSize(cTextPaveSize);
    snprintf(f_in, fgMaxCar, "Run:  %d ", run_number);
    com_bot_left->AddText(f_in);
    snprintf(f_in, fgMaxCar, "Type: %-20s", run_type.Data());
    com_bot_left->AddText(f_in);
    snprintf(f_in, fgMaxCar, "Analysis: %-10s ", ana_type.Data());
    com_bot_left->AddText(f_in);
    Int_t un = 1;
    snprintf(f_in, fgMaxCar, "Samples:    %d - %d", un, nb_of_samples);
    com_bot_left->AddText(f_in);
    snprintf(f_in, fgMaxCar, "Evts range: %d - %d", first_evt, last_evt);
    com_bot_left->AddText(f_in);
  }
 
  return com_bot_left;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, fgMaxCar, and contentValuesCheck::run_number.

Referenced by TEcnaHistos::SetAllPavesViewHisto(), TEcnaHistos::SetAllPavesViewMatrix(), TEcnaHistos::SetAllPavesViewStas(), TEcnaHistos::SetAllPavesViewStex(), and TEcnaHistos::SetAllPavesViewStin().

SetPaveCrystal() [1/2]

TPaveText * TEcnaParHistos::SetPaveCrystal	(	const Int_t &	StexCrys,
		const Int_t &	StexStinA,
		const Int_t &	StinEcha
	)

Definition at line 1988 of file TEcnaParHistos.cc.

                                                                                                              {
  Int_t arg_AlreadyRead = 0;
  Int_t flag_all_samples = 0;
  return SetPaveCrystal(StexCrys, StexStinA, StinEcha, arg_AlreadyRead, flag_all_samples);
}

Referenced by TEcnaHistos::SetAllPavesViewHisto(), and TEcnaHistos::SetAllPavesViewMatrix().

SetPaveCrystal() [2/2]

TPaveText * TEcnaParHistos::SetPaveCrystal	(	const Int_t &	StexCrys,
		const Int_t &	StexStinA,
		const Int_t &	StinEcha,
		const Int_t &	arg_AlreadyRead,
		const Int_t &	flag_all_samples
	)

Definition at line 1994 of file TEcnaParHistos.cc.

                                                                         {
  // Tower + StinEcha comment. StexCrys range: [1,max]
 
  char f_in[fgMaxCar];
  //...................... Pave tower/StinEcha(channel)/sample (top_right_box)
 
  Double_t pav_top_right_xgauche = BoxLeftX("top_right_box_EB");
  Double_t pav_top_right_xdroite = BoxRightX("top_right_box_EB");
  Double_t pav_top_right_ybas = BoxBottomY("top_right_box_EB");
  Double_t pav_top_right_yhaut = BoxTopY("top_right_box_EB");
  if (fFlagSubDet == "EE") {
    pav_top_right_xgauche = BoxLeftX("top_right_box_EE");
    pav_top_right_xdroite = BoxRightX("top_right_box_EE");
    pav_top_right_ybas = BoxBottomY("top_right_box_EE");
    pav_top_right_yhaut = BoxTopY("top_right_box_EE");
  }
 
  TPaveText* com_top_right =
      new TPaveText(pav_top_right_xgauche, pav_top_right_ybas, pav_top_right_xdroite, pav_top_right_yhaut);
  fCnewRoot++;
 
  // 1 = left adjusted, 2 = vertically centered
  Int_t cTextPaveAlign = 12;
  com_top_right->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)
  Int_t cTextPaveFont = 100;
  com_top_right->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size
  Float_t cTextPaveSize = 0.03;
  com_top_right->SetTextSize(cTextPaveSize);
  Int_t cTextBorderSize = 1;
  com_top_right->SetBorderSize(cTextBorderSize);
 
  if (fFlagSubDet == "EB") {
    if (arg_AlreadyRead == 0 || (arg_AlreadyRead == 1 && flag_all_samples == 0)) {
      snprintf(f_in, fgMaxCar, "Channel: %d ", StinEcha);
    }  // EB => range = [0,24]
    if (arg_AlreadyRead == 1 && flag_all_samples == 1) {
      snprintf(f_in, fgMaxCar, "Channel: 0 to %d", fEcal->MaxCrysInStin() - 1);
    }
    com_top_right->AddText(f_in);
    if (arg_AlreadyRead == 0 || (arg_AlreadyRead == 1 && flag_all_samples == 0)) {
      snprintf(f_in, fgMaxCar, "Crystal in SM: %d ", StexCrys);
      com_top_right->AddText(f_in);
    }
  }
 
  if (fFlagSubDet == "EE") {
    Int_t StinEchap = StinEcha + 1;
    if (arg_AlreadyRead == 0 || (arg_AlreadyRead == 1 && flag_all_samples == 0)) {
      snprintf(f_in, fgMaxCar, "Xtal in SC: %d ", StinEchap);
    }  // EE => range = [1,25]
    if (arg_AlreadyRead == 1 && flag_all_samples == 1) {
      snprintf(f_in, fgMaxCar, "Xtal in SC: 1 to %d", fEcal->MaxCrysInStin());
    }
    com_top_right->AddText(f_in);
    if (arg_AlreadyRead == 0 || (arg_AlreadyRead == 1 && flag_all_samples == 0)) {
      Int_t IX_Dee_crys = StexCrys / fEcal->MaxCrysIYInDee() + 1;
      Int_t IY_Dee_crys = StexCrys % fEcal->MaxCrysIYInDee();
      if (IY_Dee_crys == 0) {
        IX_Dee_crys--;
        IY_Dee_crys = fEcal->MaxCrysIYInDee();
      }
      snprintf(f_in, fgMaxCar, "(IX,IY)[Xtal]=(%d,%d)", IX_Dee_crys, IY_Dee_crys);
      com_top_right->AddText(f_in);
    }
  }
 
  return com_top_right;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, fEcal, fFlagSubDet, fgMaxCar, TEcnaParEcal::MaxCrysInStin(), and TEcnaParEcal::MaxCrysIYInDee().

SetPaveCrystalSample()

TPaveText * TEcnaParHistos::SetPaveCrystalSample	(	const Int_t &	StexCrys,
		const Int_t &	StexStinA,
		const Int_t &	StinEcha,
		const Int_t &	iSample
	)

Definition at line 2069 of file TEcnaParHistos.cc.

                                                                      {
  // Tower + StinEcha + sample comment
 
  char f_in[fgMaxCar];
  //...................... Pave tower/StinEcha(channel)/sample (top_right_box)
  Double_t pav_top_right_xgauche = BoxLeftX("top_right_box_EB");
  Double_t pav_top_right_xdroite = BoxRightX("top_right_box_EB");
  Double_t pav_top_right_ybas = BoxBottomY("top_right_box_EB");
  Double_t pav_top_right_yhaut = BoxTopY("top_right_box_EB");
  if (fFlagSubDet == "EE") {
    pav_top_right_xgauche = BoxLeftX("top_right_box_EE");
    pav_top_right_xdroite = BoxRightX("top_right_box_EE");
    pav_top_right_ybas = BoxBottomY("top_right_box_EE");
    pav_top_right_yhaut = BoxTopY("top_right_box_EE");
  }
 
  TPaveText* com_top_right =
      new TPaveText(pav_top_right_xgauche, pav_top_right_ybas, pav_top_right_xdroite, pav_top_right_yhaut);
  fCnewRoot++;
 
  // 1 = left adjusted, 2 = vertically centered
  Int_t cTextPaveAlign = 12;
  com_top_right->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)
  Int_t cTextPaveFont = 100;
  com_top_right->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size
  Float_t cTextPaveSize = 0.03;
  com_top_right->SetTextSize(cTextPaveSize);
  Int_t cTextBorderSize = 1;
  com_top_right->SetBorderSize(cTextBorderSize);
 
  if (fFlagSubDet == "EB") {
    snprintf(f_in, fgMaxCar, " Channel: %d ", StinEcha);
    com_top_right->AddText(f_in);
    snprintf(f_in, fgMaxCar, " Crystal in SM: %d ", StexCrys);
    com_top_right->AddText(f_in);
  }
 
  if (fFlagSubDet == "EE") {
    Int_t StinEchap = StinEcha + 1;
    snprintf(f_in, fgMaxCar, " Channel: %d ", StinEchap);  // EE => range = [1,25]
    com_top_right->AddText(f_in);
    Int_t IX_Dee_crys = StexCrys / fEcal->MaxCrysIYInDee() + 1;
    Int_t IY_Dee_crys = StexCrys % fEcal->MaxCrysIYInDee();
    if (IY_Dee_crys == 0) {
      IX_Dee_crys--;
      IY_Dee_crys = fEcal->MaxCrysIYInDee();
    }
    snprintf(f_in, fgMaxCar, "(IX,IY)[Xtal]=(%d,%d)", IX_Dee_crys, IY_Dee_crys);
    com_top_right->AddText(f_in);
  }
 
  Int_t iSample_p = iSample + 1;
  snprintf(f_in, fgMaxCar, " Sample: %d ", iSample_p);
  com_top_right->AddText(f_in);
 
  return com_top_right;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, fEcal, fFlagSubDet, fgMaxCar, and TEcnaParEcal::MaxCrysIYInDee().

Referenced by TEcnaHistos::SetAllPavesViewHisto().

SetPaveCxyz()

TPaveText * TEcnaParHistos::SetPaveCxyz

(

const Int_t &

DeeNumber

)

Definition at line 2346 of file TEcnaParHistos.cc.

                                                             {
  // Cxyz at the top or at the bottom comment
 
  //....................... GRAND pave "Cxyz"
  Double_t pav_bot_xgauche = BoxRightX("bottom_mid_box");
  Double_t pav_bot_xdroite = BoxLeftX("bottom_mid_box");
  Double_t pav_bot_ybas = BoxBottomY("bottom_left_box");
  Double_t pav_bot_yhaut = BoxTopY("bottom_left_box");
  TPaveText* com_bot_mid = new TPaveText(pav_bot_xgauche, pav_bot_ybas, pav_bot_xdroite, pav_bot_yhaut);
  fCnewRoot++;
 
  //com_bot_mid->SetOption("arc");
  //com_bot_mid->SetCornerRadius((Double_t)0.5);
  //Int_t   cTextPaveFont  = 100;  com_bot_mid->SetTextFont(cTextPaveFont);
 
  com_bot_mid->SetTextSize(0.0325);
  //........................................... (SetPaveCxyz)
  if (DeeNumber == 1) {
    com_bot_mid->AddText("        y ");
    com_bot_mid->AddText("        #uparrow ");
    com_bot_mid->AddText(" (Near)    x #leftarrow #otimes z     (Far) ");
  }
  if (DeeNumber == 2) {
    com_bot_mid->AddText("        y ");
    com_bot_mid->AddText("        #uparrow ");
    com_bot_mid->AddText(" (Near)    x #leftarrow #otimes z     (Far) ");
  }
  if (DeeNumber == 3) {
    com_bot_mid->AddText(" y           ");
    com_bot_mid->AddText(" #uparrow          ");
    com_bot_mid->AddText(" (Far)      z (#bullet) #rightarrow x     (Near) ");
  }
  if (DeeNumber == 4) {
    com_bot_mid->AddText(" y           ");
    com_bot_mid->AddText(" #uparrow          ");
    com_bot_mid->AddText(" (Far)      z (#bullet) #rightarrow x     (Near) ");
  }
 
  // com_bot_mid->AddText(" (from IP) " );
  return com_bot_mid;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), and fCnewRoot.

Referenced by TEcnaHistos::SetAllPavesViewStex(), and TEcnaHistos::SetAllPavesViewStinCrysNb().

SetPaveDee()

TPaveText * TEcnaParHistos::SetPaveDee	(	const TString &	chopt,
		const Int_t &	DeeNumber,
		const TString &	DeeType
	)

Definition at line 2207 of file TEcnaParHistos.cc.

                                                                                                          {
  // Dee pav. Called only once.
 
  char f_in[fgMaxCar];
 
  //.................................. DEFAULT OPTION: "standard"
  Double_t pav_top_left_xgauche = BoxLeftX("top_left_box_EE");
  Double_t pav_top_left_xdroite = BoxRightX("top_left_box_EE");
  Double_t pav_top_left_ybas = BoxBottomY("top_left_box_EE");
  Double_t pav_top_left_yhaut = BoxTopY("top_left_box_EE");
 
  if (chopt == "standard" || chopt == "standGH") {
    pav_top_left_xgauche = BoxLeftX("top_left_box_EE");
    pav_top_left_xdroite = BoxRightX("top_left_box_EE");
    pav_top_left_ybas = BoxBottomY("top_left_box_EE");
    pav_top_left_yhaut = BoxTopY("top_left_box_EE");
  }
 
  if (chopt == "standDee" || chopt == "standStex") {
    pav_top_left_xgauche = BoxLeftX("top_left_box_Dee");
    pav_top_left_xdroite = BoxRightX("top_left_box_Dee");
    pav_top_left_ybas = BoxBottomY("top_left_box_Dee");
    pav_top_left_yhaut = BoxTopY("top_left_box_Dee");
  }
 
  if (chopt == "several") {
    pav_top_left_xgauche = BoxLeftX("several_plots_box");
    pav_top_left_xdroite = BoxRightX("several_plots_box");
    pav_top_left_ybas = BoxBottomY("several_plots_box");
    pav_top_left_yhaut = BoxTopY("several_plots_box");
  }
  if (chopt == "sevevol") {
    pav_top_left_xgauche = BoxLeftX("several_evol_box");
    pav_top_left_xdroite = BoxRightX("several_evol_box");
    pav_top_left_ybas = BoxBottomY("several_evol_box");
    pav_top_left_yhaut = BoxTopY("several_evol_box");
  }
 
  TPaveText* com_top_left =
      new TPaveText(pav_top_left_xgauche, pav_top_left_ybas, pav_top_left_xdroite, pav_top_left_yhaut);
  fCnewRoot++;
 
  // 1 = left adjusted, 2 = vertically centered
  Int_t cTextPaveAlign = 12;
  com_top_left->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)
  Int_t cTextPaveFont = 100;
  com_top_left->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size
  Float_t cTextPaveSize = 0.04;
  com_top_left->SetTextSize(cTextPaveSize);
  Int_t cTextBorderSize = 1;
  com_top_left->SetBorderSize(cTextBorderSize);
 
  if (chopt == "standard") {
    snprintf(f_in, fgMaxCar, " Dee: %d", DeeNumber);
    com_top_left->AddText(f_in);
    snprintf(f_in, fgMaxCar, " (%s)", DeeType.Data());
    com_top_left->AddText(f_in);
  }
 
  if (chopt == "standDee" || chopt == "standStex" || chopt == "standGH") {
    snprintf(f_in, fgMaxCar, " Dee: %d  (%s) ", DeeNumber, DeeType.Data());
    com_top_left->AddText(f_in);
  }
 
  return com_top_left;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, and fgMaxCar.

Referenced by SetPaveStex().

SetPaveEvolNbOfEvtsAna()

TPaveText * TEcnaParHistos::SetPaveEvolNbOfEvtsAna	(	const TString &	ana_type,
		const Int_t &	nb_of_samples,
		const Int_t &	first_req_evt,
		const Int_t &	last_req_evt,
		const TString &	HistoType
	)

Definition at line 1667 of file TEcnaParHistos.cc.

                                                                            {
  // Analysis name + run number comment
 
  char f_in[fgMaxCar];
 
  //...................... Pave Analysis name/run number (bottom_left_box)
  Double_t pav_bot_left_xgauche = BoxLeftX("bottom_left_box");
  Double_t pav_bot_left_xdroite = BoxRightX("bottom_left_box");
  Double_t pav_bot_left_ybas = BoxBottomY("bottom_left_box");
  Double_t pav_bot_left_yhaut = BoxTopY("bottom_left_box");
 
  if (HistoType == "EvolProj") {
    pav_bot_left_xgauche = BoxLeftX("bottom_left_box_evol");
    pav_bot_left_xdroite = BoxRightX("bottom_left_box_evol");
    pav_bot_left_ybas = BoxBottomY("bottom_left_box_evol");
    pav_bot_left_yhaut = BoxTopY("bottom_left_box_evol");
  }
 
  TPaveText* com_bot_left =
      new TPaveText(pav_bot_left_xgauche, pav_bot_left_ybas, pav_bot_left_xdroite, pav_bot_left_yhaut);
  fCnewRoot++;
 
  // 1 = left adjusted, 2 = vertically centered
  Int_t cTextPaveAlign = 12;
  com_bot_left->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)    // 10*4 = 10*(ID4 = Arial)
  Int_t cTextPaveFont = 100;
  com_bot_left->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size
  Float_t cTextPaveSize = 0.03;
  com_bot_left->SetTextSize(cTextPaveSize);
  Int_t cTextBorderSize = 1;
  com_bot_left->SetBorderSize(cTextBorderSize);
 
  TString analysis_name = ana_type.Data();
 
  snprintf(f_in, fgMaxCar, "Analysis:   %s", analysis_name.Data());
  com_bot_left->AddText(f_in);
  snprintf(f_in, fgMaxCar, "Samples:    1 - %d", nb_of_samples);
  com_bot_left->AddText(f_in);
  snprintf(f_in, fgMaxCar, "Evts range: %d - %d ", first_req_evt, last_req_evt);
  com_bot_left->AddText(f_in);
 
  return com_bot_left;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, and fgMaxCar.

Referenced by TEcnaHistos::SetAllPavesViewHisto().

SetPaveEvolRuns()

TPaveText * TEcnaParHistos::SetPaveEvolRuns	(	const Int_t &	start_evol_run,
		const TString &	start_evol_date,
		const Int_t &	stop_evol_run,
		const TString &	stop_evol_date,
		const TString &	opt_plot,
		const TString &	HistoType
	)

Definition at line 1717 of file TEcnaParHistos.cc.

                                                                     {
  // First and last run of the list of runs
 
  char f_in[fgMaxCar];
 
  //...................... Pave first and last runs (bottom_right_box)
  Double_t pav_border_xgauche = BoxLeftX("bottom_right_box_evol");
  Double_t pav_border_xdroite = BoxRightX("bottom_right_box_evol");
  Double_t pav_border_ybas = BoxBottomY("bottom_right_box_evol");
  Double_t pav_border_yhaut = BoxTopY("bottom_right_box_evol");
 
  if (opt_plot == "SAME n") {
    pav_border_xgauche = BoxLeftX("bottom_right_box_evpr");
    pav_border_xdroite = BoxRightX("bottom_right_box_evpr");
    pav_border_ybas = BoxBottomY("top_right_box_EB");
    pav_border_yhaut = BoxTopY("top_right_box_EB");
  }
 
  TPaveText* pav_evol_runs = new TPaveText(pav_border_xgauche, pav_border_ybas, pav_border_xdroite, pav_border_yhaut);
  fCnewRoot++;
 
  // 1 = left adjusted, 2 = vertically centered
  Int_t cTextPaveAlign = 12;
  pav_evol_runs->SetTextAlign(cTextPaveAlign);
  // 10*4 = 10*(ID4 = Courier helvetica-medium-r-normal = Arial)
  // 10*10 = 10*(ID10 = Courier bold-r-normal = Courier New)
  Int_t cTextPaveFont = 100;
  pav_evol_runs->SetTextFont(cTextPaveFont);
  // 0.03 = 3% of the pave height
  Float_t cTextPaveSize = 0.025;
  if (HistoType == "Evol" || HistoType == "EvolProj") {
    cTextPaveSize = 0.0225;
  }
 
  pav_evol_runs->SetTextSize(cTextPaveSize);
  Int_t cTextBorderSize = 1;
  pav_evol_runs->SetBorderSize(cTextBorderSize);
 
  if (!((HistoType == "Evol" && opt_plot == "SAME n") || (HistoType == "EvolProj" && opt_plot == "SAME n"))) {
    snprintf(f_in, fgMaxCar, "First run: %d", start_evol_run);
    pav_evol_runs->AddText(f_in);
    snprintf(f_in, fgMaxCar, "(%s) ", start_evol_date.Data());
    pav_evol_runs->AddText(f_in);
    snprintf(f_in, fgMaxCar, "Last run:  %d", stop_evol_run);
    pav_evol_runs->AddText(f_in);
    snprintf(f_in, fgMaxCar, "(%s) ", stop_evol_date.Data());
    pav_evol_runs->AddText(f_in);
  }
 
  if ((HistoType == "Evol" && opt_plot == "SAME n") || (HistoType == "EvolProj" && opt_plot == "SAME n")) {
    snprintf(f_in, fgMaxCar, "First run: %d (%s) ", start_evol_run, start_evol_date.Data());
    pav_evol_runs->AddText(f_in);
    snprintf(f_in, fgMaxCar, "Last run:  %d (%s)", stop_evol_run, stop_evol_date.Data());
    pav_evol_runs->AddText(f_in);
  }
 
  return pav_evol_runs;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, and fgMaxCar.

Referenced by TEcnaHistos::SetAllPavesViewHisto().

SetPaveGeneralComment()

TPaveText * TEcnaParHistos::SetPaveGeneralComment

(

const TString &

comment

)

Definition at line 1499 of file TEcnaParHistos.cc.

                                                                       {
  // General comment
 
  TPaveText* title_g1;
 
  if (comment != "") {
    fCnew++;
 
    Double_t pav_gen_xgauche = BoxLeftX("general_comment");
    Double_t pav_gen_xdroite = BoxRightX("general_comment");
    Double_t pav_gen_ybas = BoxBottomY("general_comment");
    Double_t pav_gen_yhaut = BoxTopY("general_comment");
 
    title_g1 = new TPaveText(pav_gen_xgauche, pav_gen_ybas, pav_gen_xdroite, pav_gen_yhaut);
    fCnewRoot++;
 
    Option_t* opt_pav = "arc";
    title_g1->SetOption(opt_pav);  // <= NE MARCHE PAS
 
    TString tit_gen = comment.Data();
 
    //<<<<<<< TEcnaParHistos.cc
    //sprintf( f_in, tit_gen.Data());
    //title_g1->AddText(f_in);
    //=======
    title_g1->AddText(tit_gen);
    //>>>>>>> 1.5
 
    //   1 = left adjusted, 2 = vertically centered
    Int_t cTextPaveAlign = 12;
    title_g1->SetTextAlign(cTextPaveAlign);
    // 10*10 = 10*(ID10 = Courier New) // 10*4  = 10*(ID4  = Arial)
    Int_t cTextPaveFont = 40;
    title_g1->SetTextFont(cTextPaveFont);
    // 0.95 = 95% of the pave size
    Float_t cTextPaveSize = 0.04;
    title_g1->SetTextSize(cTextPaveSize);
    Int_t cTextBorderSize = 0;
    title_g1->SetBorderSize(cTextBorderSize);
    Double_t cTextPaveRadius = 5.;
    title_g1->SetCornerRadius(cTextPaveRadius);  // <= NE MARCHE PAS
    // Int_t cTextPaveShadCol = 0; title_g1->SetShadowColor(cTextPaveShadCol);  // <= methode non reconnue
 
    fCdelete++;
  } else {
    title_g1 = new TPaveText(0, 0, 0, 0);
    title_g1 = nullptr;
    fCnewRoot++;
  }
  return title_g1;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCdelete, fCnew, and fCnewRoot.

Referenced by TEcnaHistos::SetAllPavesViewHisto(), TEcnaHistos::SetAllPavesViewMatrix(), TEcnaHistos::SetAllPavesViewStas(), TEcnaHistos::SetAllPavesViewStex(), and TEcnaHistos::SetAllPavesViewStin().

SetPaveLVRB()

TPaveText * TEcnaParHistos::SetPaveLVRB	(	const Int_t &	SMNumber,
		const Int_t &	SMtower
	)

Definition at line 2132 of file TEcnaParHistos.cc.

                                                                                  {
  // LVRB at the top or at the bottom comment
 
  //....................... GRAND pave "LVRB"
  Double_t pav_bot_xgauche = BoxLeftX("bottom_left_box");
  Double_t pav_bot_xdroite = BoxRightX("bottom_right_box");
  Double_t pav_bot_ybas = BoxBottomY("bottom_left_box");
  Double_t pav_bot_yhaut = BoxTopY("bottom_left_box");
  TPaveText* com_bot_mid = new TPaveText(pav_bot_xgauche, pav_bot_ybas, pav_bot_xdroite, pav_bot_yhaut);
  fCnewRoot++;
 
  Color_t couleur_noir = ColorDefinition("noir");
  Color_t couleur_rouge = SetColorsForNumbers("lvrb_top");
  Color_t couleur_bleu_fonce = SetColorsForNumbers("lvrb_bottom");
 
  if (fEcalNumbering->GetSMHalfBarrel(SMNumber) == "EB+") {
    TText* t1 = com_bot_mid->AddText("   <= IP (#eta = 0)       (#eta = +85) =>   ");
    t1->SetTextColor(couleur_noir);
  }
 
  if (fEcalNumbering->GetSMHalfBarrel(SMNumber) == "EB-") {
    TText* t2 = com_bot_mid->AddText("   <= (#eta = -85)       IP (#eta = 0) =>   ");
    t2->SetTextColor(couleur_noir);
  }
 
  if (fEcalNumbering->GetTowerLvrbType(SMtower) == "top") {
    TText* t3 = nullptr;
    if (fEcalNumbering->GetSMHalfBarrel(SMNumber) == "EB+") {
      t3 = com_bot_mid->AddText("       <=== LVRB       ");
    }
    if (fEcalNumbering->GetSMHalfBarrel(SMNumber) == "EB-") {
      t3 = com_bot_mid->AddText("       LVRB ===>       ");
    }
    t3->SetTextColor(couleur_rouge);
  }
 
  if (fEcalNumbering->GetTowerLvrbType(SMtower) == "bottom") {
    TText* t4 = nullptr;
    if (fEcalNumbering->GetSMHalfBarrel(SMNumber) == "EB+") {
      t4 = com_bot_mid->AddText("        LVRB ===>       ");
    }
    if (fEcalNumbering->GetSMHalfBarrel(SMNumber) == "EB-") {
      t4 = com_bot_mid->AddText("        <=== LVRB       ");
    }
    t4->SetTextColor(couleur_bleu_fonce);
  }
  return com_bot_mid;
 
}  //  end of SetPaveLVRB

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), ColorDefinition(), fCnewRoot, fEcalNumbering, TEcnaNumbering::GetSMHalfBarrel(), TEcnaNumbering::GetTowerLvrbType(), SetColorsForNumbers(), RandomServiceHelper::t1, RandomServiceHelper::t2, and RandomServiceHelper::t3.

Referenced by TEcnaHistos::SetAllPavesViewStinCrysNb().

SetPaveNbOfEvts()

TPaveText * TEcnaParHistos::SetPaveNbOfEvts	(	const Int_t &	nb_of_evts,
		const TString &	start_date,
		const TString &	stop_date,
		const TString &	nb_col
	)

Definition at line 1615 of file TEcnaParHistos.cc.

                                                                  {
  // Number of events box
 
  char f_in[fgMaxCar];
 
  //...................... Pave number of events (bottom_right_box)
 
  Double_t pav_bot_right_xgauche = BoxLeftX("bottom_right_box");
  Double_t pav_bot_right_xdroite = BoxRightX("bottom_right_box");
  Double_t pav_bot_right_ybas = BoxBottomY("bottom_right_box");
  Double_t pav_bot_right_yhaut = BoxTopY("bottom_right_box");
  TPaveText* com_bot_right =
      new TPaveText(pav_bot_right_xgauche, pav_bot_right_ybas, pav_bot_right_xdroite, pav_bot_right_yhaut);
  fCnewRoot++;
 
  // 1 = left adjusted, 2 = vertically centered
  Int_t cTextPaveAlign = 12;
  com_bot_right->SetTextAlign(cTextPaveAlign);
  // 10*4 = 10*(ID4 = Arial)   // 10*10 = 10*(ID10 = Courier New)
  Int_t cTextPaveFont = 100;
  com_bot_right->SetTextFont(cTextPaveFont);
  // 0.05 = 5% of the pave size
  Float_t cTextPaveSize = 0.025;
  com_bot_right->SetTextSize(cTextPaveSize);
  //Int_t   cTextPaveShadCol = 0;     com_bot_right->SetShadowColor(cTextPaveShadCol);
  Int_t cTextBorderSize = 1;
  com_bot_right->SetBorderSize(cTextBorderSize);
 
  if (nb_col == "TwoCol") {
    cTextPaveSize = 0.0325;
    com_bot_right->SetTextSize(cTextPaveSize);
    snprintf(f_in, fgMaxCar, "First evt: %s              %8d events ", start_date.Data(), nb_of_evts);
    com_bot_right->AddText(f_in);
    snprintf(f_in, fgMaxCar, "Last  evt: %s ", stop_date.Data());
    com_bot_right->AddText(f_in);
  } else {
    cTextPaveSize = 0.0225;
    com_bot_right->SetTextSize(cTextPaveSize);
    snprintf(f_in, fgMaxCar, "%d events", nb_of_evts);
    com_bot_right->AddText(f_in);
    snprintf(f_in, fgMaxCar, "First evt: %s ", start_date.Data());
    com_bot_right->AddText(f_in);
    snprintf(f_in, fgMaxCar, "Last  evt: %s ", stop_date.Data());
    com_bot_right->AddText(f_in);
  }
 
  return com_bot_right;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, and fgMaxCar.

Referenced by TEcnaHistos::SetAllPavesViewHisto(), TEcnaHistos::SetAllPavesViewMatrix(), TEcnaHistos::SetAllPavesViewStas(), TEcnaHistos::SetAllPavesViewStex(), and TEcnaHistos::SetAllPavesViewStin().

SetPaveSC()

TPaveText * TEcnaParHistos::SetPaveSC	(	const Int_t &	DeeSC_X,
		const Int_t &	DeeNumber
	)

Definition at line 2276 of file TEcnaParHistos.cc.

                                                                                 {
  // SC comment
 
  char f_in[fgMaxCar];
  //...................... Pave SC/crystal(channel)/sample (top_right_box)
  Double_t pav_top_mid_xgauche = BoxLeftX("top_mid_box_EE");
  Double_t pav_top_mid_xdroite = BoxRightX("top_mid_box_EE");
  Double_t pav_top_mid_ybas = BoxBottomY("top_mid_box_EE");
  Double_t pav_top_mid_yhaut = BoxTopY("top_mid_box_EE");
  TPaveText* com_top_mid = new TPaveText(pav_top_mid_xgauche, pav_top_mid_ybas, pav_top_mid_xdroite, pav_top_mid_yhaut);
  fCnewRoot++;
 
  // 1 = left adjusted, 2 = vertically centered
  Int_t cTextPaveAlign = 12;
  com_top_mid->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)
  Int_t cTextPaveFont = 100;
  com_top_mid->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size
  Float_t cTextPaveSize = 0.03;
  com_top_mid->SetTextSize(cTextPaveSize);
  Int_t cTextBorderSize = 1;
  com_top_mid->SetBorderSize(cTextBorderSize);
 
  snprintf(f_in,
           fgMaxCar,
           "Sector: S%d, SC: %d",
           fEcalNumbering->GetDSFrom1DeeSCEcna(DeeNumber, DeeSC_X),
           fEcalNumbering->GetDSSCFrom1DeeSCEcna(DeeNumber, DeeSC_X));
  com_top_mid->AddText(f_in);
  snprintf(f_in, fgMaxCar, "SC for const.: %d", fEcalNumbering->GetDeeSCConsFrom1DeeSCEcna(DeeNumber, DeeSC_X));
  com_top_mid->AddText(f_in);
  snprintf(f_in, fgMaxCar, "Quadrant: %s", fEcalNumbering->GetSCQuadFrom1DeeSCEcna(DeeSC_X).Data());
  com_top_mid->AddText(f_in);
 
  return com_top_mid;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, fEcalNumbering, fgMaxCar, TEcnaNumbering::GetDeeSCConsFrom1DeeSCEcna(), TEcnaNumbering::GetDSFrom1DeeSCEcna(), TEcnaNumbering::GetDSSCFrom1DeeSCEcna(), and TEcnaNumbering::GetSCQuadFrom1DeeSCEcna().

Referenced by SetPaveStin().

SetPaveSCsXY()

TPaveText * TEcnaParHistos::SetPaveSCsXY	(	const Int_t &	DeeSC_X,
		const Int_t &	DeeSC_Y
	)

Definition at line 2314 of file TEcnaParHistos.cc.

                                                                                  {
  // SCs X and Y for (SCEcha,SCEcha) cov or cor matrix
 
  char f_in[fgMaxCar];
  //...................... Pave SC/SCEcha(channel)/sample (top_right_box)
  Double_t pav_top_mid_xgauche = BoxLeftX("top_mid_box_EE");
  Double_t pav_top_mid_xdroite = BoxRightX("top_mid_box_EE");
  Double_t pav_top_mid_ybas = BoxBottomY("top_mid_box_EE");
  Double_t pav_top_mid_yhaut = BoxTopY("top_mid_box_EE");
  TPaveText* com_top_mid = new TPaveText(pav_top_mid_xgauche, pav_top_mid_ybas, pav_top_mid_xdroite, pav_top_mid_yhaut);
  fCnewRoot++;
 
  // 1 = left adjusted, 2 = vertically centered
  Int_t cTextPaveAlign = 12;
  com_top_mid->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)
  Int_t cTextPaveFont = 100;
  com_top_mid->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size
  Float_t cTextPaveSize = 0.03;
  com_top_mid->SetTextSize(cTextPaveSize);
  Int_t cTextBorderSize = 1;
  com_top_mid->SetBorderSize(cTextBorderSize);
 
  snprintf(f_in, fgMaxCar, "SC X: %d", DeeSC_X);
  com_top_mid->AddText(f_in);
  snprintf(f_in, fgMaxCar, "SC Y: %d", DeeSC_Y);
  com_top_mid->AddText(f_in);
 
  return com_top_mid;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, and fgMaxCar.

Referenced by SetPaveStinsXY().

SetPaveSM()

TPaveText * TEcnaParHistos::SetPaveSM	(	const TString &	chopt,
		const Int_t &	SM_number,
		const TString &	EB_type
	)

Definition at line 1856 of file TEcnaParHistos.cc.

                                                                                                         {
  // Pave for Super-module plots
 
  char f_in[fgMaxCar];
 
  //.................................. DEFAULT OPTION: "standard"
  Double_t pav_top_left_xgauche = BoxLeftX("top_left_box_SM");
  Double_t pav_top_left_xdroite = BoxRightX("top_left_box_SM");
  Double_t pav_top_left_ybas = BoxBottomY("top_left_box_SM");
  Double_t pav_top_left_yhaut = BoxTopY("top_left_box_SM");
 
  if (chopt == "standard" || (chopt == "standGH" && EB_type == "EB-")) {
    pav_top_left_xgauche = BoxLeftX("top_left_box_EB");
    pav_top_left_xdroite = BoxRightX("top_left_box_EB");
    pav_top_left_ybas = BoxBottomY("top_left_box_EB");
    pav_top_left_yhaut = BoxTopY("top_left_box_EB");
  }
 
  if (chopt == "standSM" || chopt == "standStex" || (chopt == "standGH" && EB_type == "EB+")) {
    pav_top_left_xgauche = BoxLeftX("top_left_box_SM");
    pav_top_left_xdroite = BoxRightX("top_left_box_SM");
    pav_top_left_ybas = BoxBottomY("top_left_box_SM");
    pav_top_left_yhaut = BoxTopY("top_left_box_SM");
  }
 
  if (chopt == "several") {
    pav_top_left_xgauche = BoxLeftX("several_plots_box");
    pav_top_left_xdroite = BoxRightX("several_plots_box");
    pav_top_left_ybas = BoxBottomY("several_plots_box");
    pav_top_left_yhaut = BoxTopY("several_plots_box");
  }
 
  if (chopt == "sevevol") {
    pav_top_left_xgauche = BoxLeftX("several_evol_box");
    pav_top_left_xdroite = BoxRightX("several_evol_box");
    pav_top_left_ybas = BoxBottomY("several_evol_box");
    pav_top_left_yhaut = BoxTopY("several_evol_box");
  }
 
  TPaveText* com_top_left =
      new TPaveText(pav_top_left_xgauche, pav_top_left_ybas, pav_top_left_xdroite, pav_top_left_yhaut);
  fCnewRoot++;
 
  // 1 = left adjusted, 2 = vertically centered
  Int_t cTextPaveAlign = 12;
  com_top_left->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)
  Int_t cTextPaveFont = 100;
  com_top_left->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size
  Float_t cTextPaveSize = 0.04;
  com_top_left->SetTextSize(cTextPaveSize);
  Int_t cTextBorderSize = 1;
  com_top_left->SetBorderSize(cTextBorderSize);
 
  if (chopt == "standard" || chopt == "standSM" || chopt == "standStex" || chopt == "standGH") {
    Int_t sm_nb = SM_number;
    if (EB_type == "EB+") {
      snprintf(f_in, fgMaxCar, "EB+%d", sm_nb);
    }
    if (EB_type == "EB-") {
      sm_nb = -SM_number + fEcal->MaxSMInEB() / 2;
      snprintf(f_in, fgMaxCar, "EB%d (SM%d)", sm_nb, SM_number);
    }
    com_top_left->AddText(f_in);
  }
 
  return com_top_left;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, fEcal, fgMaxCar, and TEcnaParEcal::MaxSMInEB().

Referenced by SetPaveStex().

SetPaveStas()

TPaveText * TEcnaParHistos::SetPaveStas

(

)

Definition at line 1820 of file TEcnaParHistos.cc.

                                       {
  char f_in[fgMaxCar];
  //.................................. DEFAULT OPTION: "standard"
  Double_t pav_top_left_xgauche = BoxLeftX("top_left_box_SM");
  Double_t pav_top_left_xdroite = BoxRightX("top_left_box_SM");
  Double_t pav_top_left_ybas = BoxBottomY("top_left_box_SM");
  Double_t pav_top_left_yhaut = BoxTopY("top_left_box_SM");
 
  TPaveText* com_top_left =
      new TPaveText(pav_top_left_xgauche, pav_top_left_ybas, pav_top_left_xdroite, pav_top_left_yhaut);
  fCnewRoot++;
 
  // 1 = left adjusted, 2 = vertically centered
  Int_t cTextPaveAlign = 12;
  com_top_left->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)
  Int_t cTextPaveFont = 100;
  com_top_left->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size
  Float_t cTextPaveSize = 0.04;
  com_top_left->SetTextSize(cTextPaveSize);
  Int_t cTextBorderSize = 1;
  com_top_left->SetBorderSize(cTextBorderSize);
 
  if (fFlagSubDet == "EB") {
    snprintf(f_in, fgMaxCar, "EB");
  }
  if (fFlagSubDet == "EE") {
    snprintf(f_in, fgMaxCar, "EE");
  }
 
  com_top_left->AddText(f_in);
 
  return com_top_left;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, fFlagSubDet, and fgMaxCar.

Referenced by TEcnaHistos::SetAllPavesViewStas(), and SetPaveStex().

SetPaveStex()

TPaveText * TEcnaParHistos::SetPaveStex	(	const TString &	chopt,
		const Int_t &	StexNumber
	)

Definition at line 2393 of file TEcnaParHistos.cc.

                                                                                    {
  TPaveText* pav_text = nullptr;
 
  if (StexNumber > 0) {
    if (fFlagSubDet == "EB") {
      TString EB_type = fEcalNumbering->GetSMHalfBarrel(StexNumber);
      pav_text = SetPaveSM(chopt, StexNumber, EB_type);
    }
    if (fFlagSubDet == "EE") {
      TString dee_type = fEcalNumbering->GetEEDeeType(StexNumber);
      pav_text = SetPaveDee(chopt, StexNumber, dee_type);
    }
  }
  if (StexNumber == 0) {
    pav_text = SetPaveStas();
  }
 
  return pav_text;
}

References fEcalNumbering, fFlagSubDet, TEcnaNumbering::GetEEDeeType(), TEcnaNumbering::GetSMHalfBarrel(), SetPaveDee(), SetPaveSM(), and SetPaveStas().

Referenced by TEcnaHistos::SetAllPavesViewHisto(), TEcnaHistos::SetAllPavesViewMatrix(), TEcnaHistos::SetAllPavesViewStex(), TEcnaHistos::SetAllPavesViewStin(), and TEcnaHistos::SetAllPavesViewStinCrysNb().

SetPaveStin()

TPaveText * TEcnaParHistos::SetPaveStin	(	const Int_t &	StinNumber,
		const Int_t &	StexNumber
	)

Definition at line 2413 of file TEcnaParHistos.cc.

                                                                                       {
  TPaveText* pav_text = nullptr;
  if (fFlagSubDet == "EB") {
    pav_text = SetPaveTower(StinNumber);
  }
  if (fFlagSubDet == "EE") {
    pav_text = SetPaveSC(StinNumber, StexNumber);
  }
  return pav_text;
}

References fFlagSubDet, SetPaveSC(), and SetPaveTower().

Referenced by TEcnaHistos::SetAllPavesViewHisto(), TEcnaHistos::SetAllPavesViewMatrix(), TEcnaHistos::SetAllPavesViewStin(), and TEcnaHistos::SetAllPavesViewStinCrysNb().

SetPaveStinsXY()

TPaveText * TEcnaParHistos::SetPaveStinsXY	(	const Int_t &	StexStin_X,
		const Int_t &	StexStin_Y
	)

Definition at line 2424 of file TEcnaParHistos.cc.

                                                                                          {
  TPaveText* pav_text = nullptr;
  if (fFlagSubDet == "EB") {
    pav_text = SetPaveTowersXY(StexStin_X, StexStin_Y);
  }
  if (fFlagSubDet == "EE") {
    pav_text = SetPaveSCsXY(StexStin_X, StexStin_Y);
  }
  return pav_text;
}

References fFlagSubDet, SetPaveSCsXY(), and SetPaveTowersXY().

Referenced by TEcnaHistos::SetAllPavesViewMatrix().

SetPaveTower()

TPaveText * TEcnaParHistos::SetPaveTower

(

const Int_t &

SMtower_X

)

Definition at line 1926 of file TEcnaParHistos.cc.

                                                              {
  // Tower comment
 
  char f_in[fgMaxCar];
  //...................... Pave tower/crystal(channel)/sample (top_right_box)
  Double_t pav_top_mid_xgauche = BoxLeftX("top_mid_box_EB");
  Double_t pav_top_mid_xdroite = BoxRightX("top_mid_box_EB");
  Double_t pav_top_mid_ybas = BoxBottomY("top_mid_box_EB");
  Double_t pav_top_mid_yhaut = BoxTopY("top_mid_box_EB");
  TPaveText* com_top_mid = new TPaveText(pav_top_mid_xgauche, pav_top_mid_ybas, pav_top_mid_xdroite, pav_top_mid_yhaut);
  fCnewRoot++;
 
  // 1 = left adjusted, 2 = vertically centered
  Int_t cTextPaveAlign = 12;
  com_top_mid->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)
  Int_t cTextPaveFont = 100;
  com_top_mid->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size
  Float_t cTextPaveSize = 0.03;
  com_top_mid->SetTextSize(cTextPaveSize);
  Int_t cTextBorderSize = 1;
  com_top_mid->SetBorderSize(cTextBorderSize);
 
  snprintf(f_in, fgMaxCar, " Tower: %d ", SMtower_X);
  com_top_mid->AddText(f_in);
 
  return com_top_mid;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, and fgMaxCar.

Referenced by SetPaveStin().

SetPaveTowersXY()

TPaveText * TEcnaParHistos::SetPaveTowersXY	(	const Int_t &	SMtower_X,
		const Int_t &	SMtower_Y
	)

Definition at line 1956 of file TEcnaParHistos.cc.

                                                                                         {
  // Towers X and Y for (TowEcha,TowEcha) cov or cor matrix
 
  char f_in[fgMaxCar];
  //...................... Pave tower/TowEcha(channel)/sample (top_right_box)
  Double_t pav_top_mid_xgauche = BoxLeftX("top_mid_box_EB");
  Double_t pav_top_mid_xdroite = BoxRightX("top_mid_box_EB");
  Double_t pav_top_mid_ybas = BoxBottomY("top_mid_box_EB");
  Double_t pav_top_mid_yhaut = BoxTopY("top_mid_box_EB");
  TPaveText* com_top_mid = new TPaveText(pav_top_mid_xgauche, pav_top_mid_ybas, pav_top_mid_xdroite, pav_top_mid_yhaut);
  fCnewRoot++;
 
  // 1 = left adjusted, 2 = vertically centered
  Int_t cTextPaveAlign = 12;
  com_top_mid->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)
  Int_t cTextPaveFont = 100;
  com_top_mid->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size
  Float_t cTextPaveSize = 0.03;
  com_top_mid->SetTextSize(cTextPaveSize);
  Int_t cTextBorderSize = 1;
  com_top_mid->SetBorderSize(cTextBorderSize);
 
  snprintf(f_in, fgMaxCar, " Tower X: %d ", SMtower_X);
  com_top_mid->AddText(f_in);
  snprintf(f_in, fgMaxCar, " Tower Y: %d ", SMtower_Y);
  com_top_mid->AddText(f_in);
 
  return com_top_mid;
}

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, and fgMaxCar.

Referenced by SetPaveStinsXY().

SetViewGraphOffsets()

void TEcnaParHistos::SetViewGraphOffsets	(	TGraph *	graph,
		const TString &	HistoType
	)

Definition at line 1378 of file TEcnaParHistos.cc.

                                                                                {
  // Set offsets of labels, title axis, etc... for histo view
 
  if ((HistoType == "H1Basic") || (HistoType == "Evol")) {
    //....................... x axis
    graph->GetXaxis()->SetTitleOffset((Float_t)1.10);
    graph->GetXaxis()->SetTitleSize((Float_t)0.04);
 
    graph->GetXaxis()->SetLabelOffset((Float_t)0.015);
    graph->GetXaxis()->SetLabelSize((Float_t)0.04);
 
    graph->GetXaxis()->SetTickLength((Float_t)0.02);
    graph->GetXaxis()->SetNdivisions((Int_t)510);
 
    //....................... y axis
    graph->GetYaxis()->SetTitleOffset((Float_t)1.25);
    graph->GetYaxis()->SetTitleSize((Float_t)0.04);
 
    graph->GetYaxis()->SetLabelOffset((Float_t)0.01);
    graph->GetYaxis()->SetLabelSize((Float_t)0.04);
 
    graph->GetYaxis()->SetTickLength((Float_t)0.03);
    graph->GetYaxis()->SetNdivisions((Int_t)510);
  }
}

Referenced by TEcnaHistos::SetGraphPresentation().

SetViewHistoOffsets()

void TEcnaParHistos::SetViewHistoOffsets	(	TH1D *	histo,
		const TString &	HistoType,
		const TString &	opt_plot
	)

Definition at line 1039 of file TEcnaParHistos.cc.

                                                                                                       {
  // Set offsets of labels, title axis, etc... for histo view
 
  if (HistoType == "Global") {
    //....................... x axis
    histo->GetXaxis()->SetTitleOffset((Float_t)1.05);
    histo->GetXaxis()->SetTitleSize((Float_t)0.04);
 
    histo->GetXaxis()->SetLabelOffset((Float_t)0.006);
    histo->GetXaxis()->SetLabelSize((Float_t)0.04);
 
    histo->GetXaxis()->SetTickLength((Float_t)0.03);
    histo->GetXaxis()->SetNdivisions((Int_t)510);
 
    //....................... y axis
    histo->GetYaxis()->SetTitleOffset((Float_t)1.5);
    histo->GetYaxis()->SetTitleSize((Float_t)0.04);
 
    histo->GetYaxis()->SetLabelOffset((Float_t)0.01);
    histo->GetYaxis()->SetLabelSize((Float_t)0.04);
 
    histo->GetYaxis()->SetTickLength((Float_t)0.03);
    histo->GetYaxis()->SetNdivisions((Int_t)510);
  }
 
  if (HistoType == "Proj" || HistoType == "SampGlobal" || HistoType == "SampProj") {
    //....................... x axis
    histo->GetXaxis()->SetTitleOffset((Float_t)1.05);
    histo->GetXaxis()->SetTitleSize((Float_t)0.04);
 
    histo->GetXaxis()->SetLabelOffset((Float_t)0.006);
    histo->GetXaxis()->SetLabelSize((Float_t)0.04);
 
    histo->GetXaxis()->SetTickLength((Float_t)0.03);
    histo->GetXaxis()->SetNdivisions((Int_t)510);
 
    //....................... y axis
    histo->GetYaxis()->SetTitleOffset((Float_t)1.75);
    histo->GetYaxis()->SetTitleSize((Float_t)0.04);
 
    histo->GetYaxis()->SetLabelOffset((Float_t)0.01);
    histo->GetYaxis()->SetLabelSize((Float_t)0.04);
 
    histo->GetYaxis()->SetTickLength((Float_t)0.03);
    histo->GetYaxis()->SetNdivisions((Int_t)510);
  }
 
  if (HistoType == "H1Basic" || HistoType == "Evol" ||
      (HistoType == "EvolProj" && !(opt_plot == "SAME" || opt_plot == "SAME n"))) {
    //....................... x axis
    histo->GetXaxis()->SetTitleOffset((Float_t)1.25);
    histo->GetXaxis()->SetTitleSize((Float_t)0.04);
 
    histo->GetXaxis()->SetLabelOffset((Float_t)0.005);
    histo->GetXaxis()->SetLabelSize((Float_t)0.04);
 
    histo->GetXaxis()->SetTickLength((Float_t)0.03);
    histo->GetXaxis()->SetNdivisions((Int_t)510);
 
    //....................... y axis
    histo->GetYaxis()->SetTitleOffset((Float_t)1.75);
    histo->GetYaxis()->SetTitleSize((Float_t)0.04);
 
    histo->GetYaxis()->SetLabelOffset((Float_t)0.01);
    histo->GetYaxis()->SetLabelSize((Float_t)0.04);
 
    histo->GetYaxis()->SetTickLength((Float_t)0.03);
    histo->GetYaxis()->SetNdivisions((Int_t)510);
  }
 
  if (HistoType == "EvolProj" && (opt_plot == "SAME" || opt_plot == "SAME n")) {
    //....................... x axis
    histo->GetXaxis()->SetTitleOffset((Float_t)1.25);
    histo->GetXaxis()->SetTitleSize((Float_t)0.04);
 
    histo->GetXaxis()->SetLabelOffset((Float_t)0.005);
    histo->GetXaxis()->SetLabelSize((Float_t)0.04);
 
    histo->GetXaxis()->SetTickLength((Float_t)0.03);
    histo->GetXaxis()->SetNdivisions((Int_t)510);
 
    //....................... y axis
    histo->GetYaxis()->SetTitleOffset((Float_t)1.25);
    histo->GetYaxis()->SetTitleSize((Float_t)0.04);
 
    histo->GetYaxis()->SetLabelOffset((Float_t)0.01);
    histo->GetYaxis()->SetLabelSize((Float_t)0.04);
 
    histo->GetYaxis()->SetTickLength((Float_t)0.03);
    histo->GetYaxis()->SetNdivisions((Int_t)510);
  }
 
  if (HistoType == "colz") {
    //....................... x axis
    histo->GetXaxis()->SetTitleOffset((Float_t)1.25);
    histo->GetXaxis()->SetTitleSize((Float_t)0.04);
 
    histo->GetXaxis()->SetLabelOffset((Float_t)0.005);
    histo->GetXaxis()->SetLabelSize((Float_t)0.04);
 
    histo->GetXaxis()->SetTickLength((Float_t)0.03);
    histo->GetXaxis()->SetNdivisions((Int_t)510);
 
    //....................... y axis
    histo->GetYaxis()->SetTitleOffset((Float_t)1.45);
    histo->GetYaxis()->SetTitleSize((Float_t)0.04);
 
    histo->GetYaxis()->SetLabelOffset((Float_t)0.01);
    histo->GetYaxis()->SetLabelSize((Float_t)0.04);
 
    histo->GetYaxis()->SetTickLength((Float_t)0.03);
    histo->GetYaxis()->SetNdivisions((Int_t)510);
  }
 
  if (HistoType == "lego" || HistoType == "surf") {
    //....................... x axis
    histo->GetXaxis()->SetTitleOffset((Float_t)1.7);
    histo->GetXaxis()->SetTitleSize((Float_t)0.04);
 
    histo->GetXaxis()->SetLabelOffset((Float_t)0.005);
    histo->GetXaxis()->SetLabelSize((Float_t)0.04);
 
    histo->GetXaxis()->SetTickLength((Float_t)0.03);
    histo->GetXaxis()->SetNdivisions((Int_t)510);
 
    //....................... y axis
    histo->GetYaxis()->SetTitleOffset((Float_t)1.85);
    histo->GetYaxis()->SetTitleSize((Float_t)0.04);
 
    histo->GetYaxis()->SetLabelOffset((Float_t)0.01);
    histo->GetYaxis()->SetLabelSize((Float_t)0.04);
 
    histo->GetYaxis()->SetTickLength((Float_t)0.03);
    histo->GetYaxis()->SetNdivisions((Int_t)510);
  }
 
  if (HistoType == "Stin") {
    //.......... x axis (remove labels and ticks)
    histo->GetXaxis()->SetTitleOffset((Float_t)9999.);
    histo->GetXaxis()->SetTitleSize((Float_t)0.05);
 
    histo->GetXaxis()->SetLabelOffset((Float_t)9999.);
    histo->GetXaxis()->SetLabelSize((Float_t)0.);
 
    histo->GetXaxis()->SetNdivisions((Int_t)1);
    histo->GetXaxis()->SetTickLength((Float_t)0.);
 
    //.......... y axis (remove labels and ticks)
    histo->GetYaxis()->SetTitleOffset((Float_t)9999.);
    histo->GetYaxis()->SetTitleSize((Float_t)0.05);
 
    histo->GetYaxis()->SetLabelOffset((Float_t)9999.);
    histo->GetYaxis()->SetLabelSize((Float_t)0.);
 
    histo->GetYaxis()->SetNdivisions((Int_t)1);
    histo->GetYaxis()->SetTickLength((Float_t)0.);
  }
 
  if (HistoType == "Stex2DEB" || HistoType == "Stex2DEE" || HistoType == "Stex2DEENb" || HistoType == "Stas2DEB" ||
      HistoType == "Stas2DEE") {
    //.......... x axis (remove labels and ticks)
    histo->GetXaxis()->SetTitleOffset((Float_t)9999.);
    histo->GetXaxis()->SetTitleSize((Float_t)0.075);
 
    histo->GetXaxis()->SetLabelOffset((Float_t)9999.);
    histo->GetXaxis()->SetLabelSize((Float_t)0.);
 
    histo->GetXaxis()->SetNdivisions((Int_t)1);
    histo->GetXaxis()->SetTickLength((Float_t)0.);
 
    //.......... y axis (remove labels and ticks)
    histo->GetYaxis()->SetTitleOffset((Float_t)9999.);
    histo->GetYaxis()->SetTitleSize((Float_t)0.075);
 
    histo->GetYaxis()->SetLabelOffset((Float_t)9999.);
    histo->GetYaxis()->SetLabelSize((Float_t)0.);
 
    histo->GetYaxis()->SetNdivisions((Int_t)1);
    histo->GetYaxis()->SetTickLength((Float_t)0.);
  }
}

References timingPdfMaker::histo.

Referenced by TEcnaHistos::SCCrystalNumbering(), and TEcnaHistos::SetHistoPresentation().

SetViewHistoPadMargins()

void TEcnaParHistos::SetViewHistoPadMargins	(	const TString &	HistoType,
		const TString &	opt_plot
	)

Definition at line 912 of file TEcnaParHistos.cc.

                                                                                             {
  // Set active pad margins for histo view
 
  //.......... default
  gStyle->SetPadBottomMargin(0.125);
  gStyle->SetPadTopMargin(0.125);
  gStyle->SetPadLeftMargin(0.125);
  gStyle->SetPadRightMargin(0.125);
 
  if (HistoType == "colz" || HistoType == "lego" || HistoType == "surf" || HistoType == "Stin") {
    gStyle->SetPadBottomMargin(0.125);
    gStyle->SetPadTopMargin(0.135);
    gStyle->SetPadLeftMargin(0.135);
    gStyle->SetPadRightMargin(0.135);
  }
 
  if (HistoType == "Stex2DEB") {
    gStyle->SetPadBottomMargin(0.145);
    gStyle->SetPadTopMargin(0.135);
    gStyle->SetPadLeftMargin(0.125);
    gStyle->SetPadRightMargin(0.125);
  }
 
  if (HistoType == "Stex2DEE" || HistoType == "Stex2DEENb") {
    gStyle->SetPadBottomMargin(0.120);
    gStyle->SetPadTopMargin(0.110);
    gStyle->SetPadLeftMargin(0.130);
    gStyle->SetPadRightMargin(0.130);
  }
  if (HistoType == "Stas2DEB") {
    gStyle->SetPadBottomMargin(0.145);
    gStyle->SetPadTopMargin(0.135);
    gStyle->SetPadLeftMargin(0.125);
    gStyle->SetPadRightMargin(0.125);
  }
 
  if (HistoType == "Stas2DEE") {
    gStyle->SetPadBottomMargin(0.145);
    gStyle->SetPadTopMargin(0.135);
    gStyle->SetPadLeftMargin(0.105);
    gStyle->SetPadRightMargin(0.115);
  }
  if (HistoType == "Global") {
    gStyle->SetPadBottomMargin((Float_t)0.125);
    gStyle->SetPadTopMargin((Float_t)0.175);
    gStyle->SetPadLeftMargin((Float_t)0.115);
    gStyle->SetPadRightMargin((Float_t)0.05);
  }
 
  if (HistoType == "Proj" || HistoType == "SampProj") {
    gStyle->SetPadBottomMargin(0.115);
    gStyle->SetPadTopMargin(0.155);
    gStyle->SetPadLeftMargin(0.15);
    gStyle->SetPadRightMargin(0.05);
  }
 
  if (HistoType == "H1Basic") {
    gStyle->SetPadBottomMargin(0.1275);
    gStyle->SetPadTopMargin(0.165);
    gStyle->SetPadLeftMargin(0.15);
    gStyle->SetPadRightMargin(0.05);
  }
 
  if (HistoType == "Evol" && opt_plot == "ONLYONE") {
    gStyle->SetPadBottomMargin(0.110);
    gStyle->SetPadTopMargin(0.2);
    gStyle->SetPadLeftMargin(0.115);
    gStyle->SetPadRightMargin(0.035);
  }
  if (HistoType == "Evol" && opt_plot == "SAME") {
    gStyle->SetPadBottomMargin(0.110);
    gStyle->SetPadTopMargin(0.185);
    gStyle->SetPadLeftMargin(0.115);
    gStyle->SetPadRightMargin(0.035);
  }
  if (HistoType == "Evol" && opt_plot == "SAME n") {
    gStyle->SetPadBottomMargin(0.110);
    gStyle->SetPadTopMargin(0.1);
    gStyle->SetPadLeftMargin(0.115);
    gStyle->SetPadRightMargin(0.035);
  }
 
  if (HistoType == "EvolProj" && opt_plot == "ONLYONE") {
    gStyle->SetPadBottomMargin(0.1275);
    gStyle->SetPadTopMargin(0.165);
    gStyle->SetPadLeftMargin(0.15);
    gStyle->SetPadRightMargin(0.05);
  }
  if (HistoType == "EvolProj" && opt_plot == "SAME") {
    gStyle->SetPadBottomMargin(0.110);
    gStyle->SetPadTopMargin(0.185);
    gStyle->SetPadLeftMargin(0.115);
    gStyle->SetPadRightMargin(0.035);
  }
  if (HistoType == "EvolProj" && opt_plot == "SAME n") {
    gStyle->SetPadBottomMargin(0.110);
    gStyle->SetPadTopMargin(0.1);
    gStyle->SetPadLeftMargin(0.115);
    gStyle->SetPadRightMargin(0.035);
  }
}

Referenced by TEcnaHistos::SetGraphPresentation(), and TEcnaHistos::SetHistoPresentation().

SetViewHistoStats()

void TEcnaParHistos::SetViewHistoStats	(	TH1D *	histo,
		const TString &	HistoType
	)

Definition at line 1023 of file TEcnaParHistos.cc.

                                                                            {
  // Set stats box for histo view
 
  Bool_t b_true = kTRUE;
  Bool_t b_false = kFALSE;
 
  histo->SetStats(b_false);
 
  if (HistoType == "Global") {
    histo->SetStats(b_false);
  }
  if (HistoType == "Proj" || HistoType == "SampProj") {
    histo->SetStats(b_true);
  }
}

References timingPdfMaker::histo.

Referenced by TEcnaHistos::SetHistoPresentation().

SetViewHistoStyle()

void TEcnaParHistos::SetViewHistoStyle

(

const TString &

HistoType

)

Definition at line 828 of file TEcnaParHistos.cc.

                                                               {
  // Set style parameters for histo view
 
  //......................... Palette
  gStyle->SetPalette(1, nullptr);  // default: rainbow spectrum
 
  //............................... Date
  gStyle->SetOptDate(0);
 
  //............................... Histo title size
  gStyle->SetTitleW(0.5);
  gStyle->SetTitleH(0.075);  // default
 
  if (HistoType == "colz" || HistoType == "lego" || HistoType == "surf" || HistoType == "Stin") {
    gStyle->SetTitleW(0.8);
    gStyle->SetTitleH(0.075);
  }
 
  if ((HistoType == "H1Basic") || (HistoType == "Evol")) {
    gStyle->SetTitleW(0.5);
    gStyle->SetTitleH(0.075);
  }
 
  if (HistoType == "Stex2DEB") {
    gStyle->SetTitleW(0.2);
    gStyle->SetTitleH(0.095);
  }
 
  if (HistoType == "Stex2DEE") {
    gStyle->SetTitleW(0.45);
    gStyle->SetTitleH(0.08);
  }
 
  if (HistoType == "Stex2DEENb") {
    gStyle->SetTitleW(0.85);
    gStyle->SetTitleH(0.08);
  }
 
  if (HistoType == "Stas2DEB" || HistoType == "Stas2DEE") {
    gStyle->SetTitleW(0.225);
    gStyle->SetTitleH(0.095);
  }
 
  if (HistoType == "Global" || HistoType == "Proj" || HistoType == "SampProj" || HistoType == "EvolProj") {
    gStyle->SetTitleW(0.5);
    gStyle->SetTitleH(0.08);
  }
 
  //............................. Statistics box style
  gStyle->SetOptStat(1110);
 
  //............................. Statistics box size
  if (HistoType == "colz" || HistoType == "lego" || HistoType == "surf" || HistoType == "Stin") {
    gStyle->SetStatW(0.55);
    gStyle->SetStatH(0.2);
    gStyle->SetStatY(1);
  }
 
  if (HistoType == "Global") {
    gStyle->SetStatW(0.375);
    gStyle->SetStatH(0.180);
    gStyle->SetStatY(0.9875);
  }
  if (HistoType == "Proj" || HistoType == "SampProj" || HistoType == "EvolProj") {
    gStyle->SetStatW(0.375);
    gStyle->SetStatH(0.180);
    gStyle->SetStatY(0.9875);
  }
 
  if ((HistoType == "H1Basic") || (HistoType == "Evol")) {
    gStyle->SetStatW(0.375);
    gStyle->SetStatH(0.180);
    gStyle->SetStatY(0.9875);
  }
 
  //....... Marker and line style
 
  gStyle->SetMarkerStyle(1);
  if (HistoType == "Global") {
    gStyle->SetMarkerStyle(20);
  }
}

Referenced by TEcnaHistos::SCCrystalNumbering(), TEcnaHistos::SetAllPavesViewStex(), TEcnaHistos::SetGraphPresentation(), TEcnaHistos::SetHistoPresentation(), and TEcnaHistos::TowerCrystalNumbering().

Member Data Documentation

fAllXtalsInStinPlot

TString TEcnaParHistos::fAllXtalsInStinPlot

private

Definition at line 74 of file TEcnaParHistos.h.

Referenced by BuildStandardPlotOption(), GetCodeAllXtalsInStinPlot(), and Init().

fCdelete

Int_t TEcnaParHistos::fCdelete

private

Definition at line 52 of file TEcnaParHistos.h.

Referenced by SetPaveGeneralComment().

fCdeleteRoot

Int_t TEcnaParHistos::fCdeleteRoot

private

Definition at line 53 of file TEcnaParHistos.h.

fCnaCommand

Int_t TEcnaParHistos::fCnaCommand

private

Definition at line 57 of file TEcnaParHistos.h.

Referenced by Init().

fCnaError

Int_t TEcnaParHistos::fCnaError

private

Definition at line 57 of file TEcnaParHistos.h.

Referenced by Init().

fCnew

Int_t TEcnaParHistos::fCnew

private

Definition at line 52 of file TEcnaParHistos.h.

Referenced by SetPaveGeneralComment().

fCnewRoot

Int_t TEcnaParHistos::fCnewRoot

private

Definition at line 53 of file TEcnaParHistos.h.

Referenced by SetOptionSamePaveBorder(), SetPaveAnalysisRun(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveCxyz(), SetPaveDee(), SetPaveEvolNbOfEvtsAna(), SetPaveEvolRuns(), SetPaveGeneralComment(), SetPaveLVRB(), SetPaveNbOfEvts(), SetPaveSC(), SetPaveSCsXY(), SetPaveSM(), SetPaveStas(), SetPaveTower(), and SetPaveTowersXY().

fEcal

TEcnaParEcal* TEcnaParHistos::fEcal

private

Definition at line 59 of file TEcnaParHistos.h.

Referenced by DeeOffsetX(), SetEcalSubDetector(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveSM(), and TEcnaParHistos().

fEcalNumbering

TEcnaNumbering* TEcnaParHistos::fEcalNumbering

private

Definition at line 60 of file TEcnaParHistos.h.

Referenced by SetEcalSubDetector(), SetPaveLVRB(), SetPaveSC(), SetPaveStex(), and TEcnaParHistos().

fFlagSubDet

TString TEcnaParHistos::fFlagSubDet

private

Definition at line 62 of file TEcnaParHistos.h.

Referenced by GetYmaxDefaultValue(), SetEcalSubDetector(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveStas(), SetPaveStex(), SetPaveStin(), and SetPaveStinsXY().

fgMaxCar

Int_t TEcnaParHistos::fgMaxCar

private

Definition at line 50 of file TEcnaParHistos.h.

Referenced by GetHistoType(), GetQuantityName(), GetXVarHisto(), GetYVarHisto(), Init(), SetEcalSubDetector(), SetPaveAnalysisRun(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveDee(), SetPaveEvolNbOfEvtsAna(), SetPaveEvolRuns(), SetPaveNbOfEvts(), SetPaveSC(), SetPaveSCsXY(), SetPaveSM(), SetPaveStas(), SetPaveTower(), and SetPaveTowersXY().

fMarginAutoMinMax

Double_t TEcnaParHistos::fMarginAutoMinMax

private

Definition at line 67 of file TEcnaParHistos.h.

Referenced by GetMarginAutoMinMax(), and Init().

fMaxColorNumber

Int_t TEcnaParHistos::fMaxColorNumber

private

Definition at line 66 of file TEcnaParHistos.h.

Referenced by ColorTab(), GetMaxNbOfColors(), Init(), and SetColorPalette().

fMaxNbOfRunsInLists

Int_t TEcnaParHistos::fMaxNbOfRunsInLists

private

Definition at line 69 of file TEcnaParHistos.h.

Referenced by Init(), and MaxNbOfRunsInLists().

fNbOfRunsDisplayed

Int_t TEcnaParHistos::fNbOfRunsDisplayed

private

Definition at line 68 of file TEcnaParHistos.h.

Referenced by GetNbOfRunsDisplayed(), and Init().

fOnlyOnePlot

TString TEcnaParHistos::fOnlyOnePlot

private

Definition at line 71 of file TEcnaParHistos.h.

Referenced by BuildStandardPlotOption(), GetCodeOnlyOnePlot(), and Init().

fPlotAllXtalsInStin

Int_t TEcnaParHistos::fPlotAllXtalsInStin

private

Definition at line 75 of file TEcnaParHistos.h.

Referenced by GetCodePlotAllXtalsInStin(), and Init().

fSameOnePlot

TString TEcnaParHistos::fSameOnePlot

private

Definition at line 73 of file TEcnaParHistos.h.

Referenced by BuildStandardPlotOption(), GetCodeSameOnePlot(), and Init().

fSeveralPlot

TString TEcnaParHistos::fSeveralPlot

private

Definition at line 72 of file TEcnaParHistos.h.

Referenced by BuildStandardPlotOption(), GetCodeSeveralPlot(), and Init().

fTTBELL

TString TEcnaParHistos::fTTBELL

private

Definition at line 55 of file TEcnaParHistos.h.

Referenced by BuildStandard1DHistoCodeX(), BuildStandard1DHistoCodeXY(), BuildStandard1DHistoCodeY(), BuildStandardBetweenWhatCode(), BuildStandardCovOrCorCode(), BuildStandardDetectorCode(), BuildStandardPlotOption(), GetTechHistoCode(), and Init().