PFMETAlgorithmMVA.cc

Go to the documentation of this file.

#include "RecoMET/METPUSubtraction/interface/PFMETAlgorithmMVA.h"
 
#include "FWCore/ParameterSet/interface/FileInPath.h"
#include "FWCore/Utilities/interface/Exception.h"
 
#include "FWCore/ServiceRegistry/interface/Service.h"
#include "FWCore/Framework/interface/ESHandle.h"
#include "CondFormats/DataRecord/interface/GBRWrapperRcd.h"
 
#include "DataFormats/METReco/interface/CommonMETData.h"
 
#include <TFile.h>
 
#include <iomanip>
 
enum MVAType { kBaseline = 0 };
 
const double Pi = std::cos(-1);
 
const std::string PFMETAlgorithmMVA::updateVariableNames(std::string input) {
  if (input == "sumet")
    return "particleFlow_SumET";
  if (input == "npv")
    return "nPV";
  if (input == "pfu")
    return "particleFlow_U";
  if (input == "pfuphi")
    return "particleFlow_UPhi";
  if (input == "tksumet")
    return "track_SumET";
  if (input == "tku")
    return "track_U";
  if (input == "tkuphi")
    return "track_UPhi";
  if (input == "nopusumet")
    return "noPileUp_SumET";
  if (input == "nopuu")
    return "noPileUp_U";
  if (input == "nopuuphi")
    return "noPileUp_UPhi";
  if (input == "pusumet")
    return "pileUp_SumET";
  if (input == "pumet")
    return "pileUp_MET";
  if (input == "pumetphi")
    return "pileUp_METPhi";
  if (input == "pucsumet")
    return "pileUpCorrected_SumET";
  if (input == "pucu")
    return "pileUpCorrected_U";
  if (input == "pucuphi")
    return "pileUpCorrected_UPhi";
  if (input == "jetpt1")
    return "jet1_pT";
  if (input == "jeteta1")
    return "jet1_eta";
  if (input == "jetphi1")
    return "jet1_Phi";
  if (input == "jetpt2")
    return "jet2_pT";
  if (input == "jeteta2")
    return "jet2_eta";
  if (input == "jetphi2")
    return "jet2_Phi";
  if (input == "nalljet")
    return "nJets";
  if (input == "njet")
    return "numJetsPtGt30";
  if (input == "uphi_mva")
    return "PhiCor_UPhi";
  if (input == "uphix_mva")
    return "PhiCor_UPhi";
  if (input == "ux_mva")
    return "RecoilCor_U";
  return input;
}
 
const GBRForest* PFMETAlgorithmMVA::loadMVAfromFile(const edm::FileInPath& inputFileName, const std::string& mvaName) {
  if (inputFileName.location() == edm::FileInPath::Unknown)
    throw cms::Exception("PFMETAlgorithmMVA::loadMVA") << " Failed to find File = " << inputFileName << " !!\n";
  std::unique_ptr<TFile> inputFile(new TFile(inputFileName.fullPath().data()));
 
  std::vector<std::string>* lVec = (std::vector<std::string>*)inputFile->Get("varlist");
 
  if (lVec == nullptr) {
    throw cms::Exception("PFMETAlgorithmMVA::loadMVA")
        << " Failed to load mva file : " << inputFileName.fullPath().data() << " is not a proper file !!\n";
  }
 
  std::vector<std::string> variableNames;
  for (unsigned int i = 0; i < lVec->size(); ++i) {
    variableNames.push_back(updateVariableNames(lVec->at(i)));
  }
 
  if (mvaName.find(mvaNameU_) != std::string::npos)
    varForU_ = variableNames;
  else if (mvaName.find(mvaNameDPhi_) != std::string::npos)
    varForDPhi_ = variableNames;
  else if (mvaName.find(mvaNameCovU1_) != std::string::npos)
    varForCovU1_ = variableNames;
  else if (mvaName.find(mvaNameCovU2_) != std::string::npos)
    varForCovU2_ = variableNames;
  else
    throw cms::Exception("PFMETAlgorithmMVA::loadMVA")
        << "MVA MET weight file tree names do not match specified inputs" << std::endl;
 
  const GBRForest* mva = (GBRForest*)inputFile->Get(mvaName.data());
  if (!mva)
    throw cms::Exception("PFMETAlgorithmMVA::loadMVA")
        << " Failed to load MVA = " << mvaName.data() << " from file = " << inputFileName.fullPath().data() << " !!\n";
 
  return mva;
}
 
const GBRForest* PFMETAlgorithmMVA::loadMVAfromDB(const edm::EventSetup& es, const std::string& mvaName) {
  edm::ESHandle<GBRForest> mva;
  es.get<GBRWrapperRcd>().get(mvaName, mva);
  return mva.product();
}
 
PFMETAlgorithmMVA::PFMETAlgorithmMVA(const edm::ParameterSet& cfg)
    : utils_(cfg),
      mvaReaderU_(nullptr),
      mvaReaderDPhi_(nullptr),
      mvaReaderCovU1_(nullptr),
      mvaReaderCovU2_(nullptr),
      cfg_(cfg) {
  mvaType_ = kBaseline;
 
  loadMVAfromDB_ = cfg.getParameter<bool>("loadMVAfromDB");
}
 
PFMETAlgorithmMVA::~PFMETAlgorithmMVA() {
  if (!loadMVAfromDB_) {
    delete mvaReaderU_;
    delete mvaReaderDPhi_;
    delete mvaReaderCovU1_;
    delete mvaReaderCovU2_;
  }
}
 
//-------------------------------------------------------------------------------
void PFMETAlgorithmMVA::initialize(const edm::EventSetup& es) {
  edm::ParameterSet cfgInputRecords = cfg_.getParameter<edm::ParameterSet>("inputRecords");
  mvaNameU_ = cfgInputRecords.getParameter<std::string>("U");
  mvaNameDPhi_ = cfgInputRecords.getParameter<std::string>("DPhi");
  mvaNameCovU1_ = cfgInputRecords.getParameter<std::string>("CovU1");
  mvaNameCovU2_ = cfgInputRecords.getParameter<std::string>("CovU2");
 
  if (loadMVAfromDB_) {
    mvaReaderU_ = loadMVAfromDB(es, mvaNameU_);
    mvaReaderDPhi_ = loadMVAfromDB(es, mvaNameDPhi_);
    mvaReaderCovU1_ = loadMVAfromDB(es, mvaNameCovU1_);
    mvaReaderCovU2_ = loadMVAfromDB(es, mvaNameCovU2_);
  } else {
    edm::ParameterSet cfgInputFileNames = cfg_.getParameter<edm::ParameterSet>("inputFileNames");
 
    edm::FileInPath inputFileNameU = cfgInputFileNames.getParameter<edm::FileInPath>("U");
    mvaReaderU_ = loadMVAfromFile(inputFileNameU, mvaNameU_);
    edm::FileInPath inputFileNameDPhi = cfgInputFileNames.getParameter<edm::FileInPath>("DPhi");
    mvaReaderDPhi_ = loadMVAfromFile(inputFileNameDPhi, mvaNameDPhi_);
    edm::FileInPath inputFileNameCovU1 = cfgInputFileNames.getParameter<edm::FileInPath>("CovU1");
    mvaReaderCovU1_ = loadMVAfromFile(inputFileNameCovU1, mvaNameCovU1_);
    edm::FileInPath inputFileNameCovU2 = cfgInputFileNames.getParameter<edm::FileInPath>("CovU2");
    mvaReaderCovU2_ = loadMVAfromFile(inputFileNameCovU2, mvaNameCovU2_);
  }
}
 
//-------------------------------------------------------------------------------
void PFMETAlgorithmMVA::setInput(const std::vector<reco::PUSubMETCandInfo>& leptons,
                                 const std::vector<reco::PUSubMETCandInfo>& jets,
                                 const std::vector<reco::PUSubMETCandInfo>& pfCandidates,
                                 const std::vector<reco::Vertex::Point>& vertices) {
  utils_.computeAllSums(jets, leptons, pfCandidates);
 
  sumLeptonPx_ = utils_.getLeptonsSumMEX();
  sumLeptonPy_ = utils_.getLeptonsSumMEY();
 
  chargedSumLeptonPx_ = utils_.getLeptonsChSumMEX();
  chargedSumLeptonPy_ = utils_.getLeptonsChSumMEY();
 
  const std::vector<reco::PUSubMETCandInfo> jets_cleaned = utils_.getCleanedJets();
 
  CommonMETData pfRecoil_data = utils_.computeRecoil(MvaMEtUtilities::kPF);
  CommonMETData chHSRecoil_data = utils_.computeRecoil(MvaMEtUtilities::kChHS);
  CommonMETData hsRecoil_data = utils_.computeRecoil(MvaMEtUtilities::kHS);
  CommonMETData puRecoil_data = utils_.computeRecoil(MvaMEtUtilities::kPU);
  CommonMETData hsMinusNeutralPUMEt_data = utils_.computeRecoil(MvaMEtUtilities::kHSMinusNeutralPU);
 
  reco::Candidate::LorentzVector jet1P4 = utils_.leadJetP4(jets_cleaned);
  reco::Candidate::LorentzVector jet2P4 = utils_.subleadJetP4(jets_cleaned);
 
  var_["particleFlow_U"] = pfRecoil_data.met;
  var_["particleFlow_SumET"] = pfRecoil_data.sumet;
  var_["particleFlow_UPhi"] = pfRecoil_data.phi;
 
  var_["track_SumET"] = chHSRecoil_data.sumet / var_["particleFlow_SumET"];
  var_["track_U"] = chHSRecoil_data.met;
  var_["track_UPhi"] = chHSRecoil_data.phi;
 
  var_["noPileUp_SumET"] = hsRecoil_data.sumet / var_["particleFlow_SumET"];
  var_["noPileUp_U"] = hsRecoil_data.met;
  var_["noPileUp_UPhi"] = hsRecoil_data.phi;
 
  var_["pileUp_SumET"] = puRecoil_data.sumet / var_["particleFlow_SumET"];
  var_["pileUp_MET"] = puRecoil_data.met;
  var_["pileUp_METPhi"] = puRecoil_data.phi;
 
  var_["pileUpCorrected_SumET"] = hsMinusNeutralPUMEt_data.sumet / var_["particleFlow_SumET"];
  var_["pileUpCorrected_U"] = hsMinusNeutralPUMEt_data.met;
  var_["pileUpCorrected_UPhi"] = hsMinusNeutralPUMEt_data.phi;
 
  var_["jet1_pT"] = jet1P4.pt();
  var_["jet1_eta"] = jet1P4.eta();
  var_["jet1_Phi"] = jet1P4.phi();
  var_["jet2_pT"] = jet2P4.pt();
  var_["jet2_eta"] = jet2P4.eta();
  var_["jet2_Phi"] = jet2P4.phi();
 
  var_["numJetsPtGt30"] = utils_.numJetsAboveThreshold(jets_cleaned, 30.);
  var_["nJets"] = jets_cleaned.size();
  var_["nPV"] = vertices.size();
}
 
//-------------------------------------------------------------------------------
std::unique_ptr<float[]> PFMETAlgorithmMVA::createFloatVector(std::vector<std::string> variableNames) {
  std::unique_ptr<float[]> floatVector(new float[variableNames.size()]);
  int i = 0;
  for (const auto& variableName : variableNames) {
    floatVector[i++] = var_[variableName];
  }
  return floatVector;
}
 
//-------------------------------------------------------------------------------
void PFMETAlgorithmMVA::evaluateMVA() {
  // CV: MVAs needs to be evaluated in order { DPhi, U1, CovU1, CovU2 }
  //     as MVA for U1 (CovU1, CovU2) uses output of DPhi (DPhi and U1) MVA
  mvaOutputDPhi_ = GetResponse(mvaReaderDPhi_, varForDPhi_);
  var_["PhiCor_UPhi"] = var_["particleFlow_UPhi"] + mvaOutputDPhi_;
  mvaOutputU_ = GetResponse(mvaReaderU_, varForU_);
  var_["RecoilCor_U"] = var_["particleFlow_U"] * mvaOutputU_;
  var_["RecoilCor_UPhi"] = var_["PhiCor_UPhi"];
  mvaOutputCovU1_ = std::pow(GetResponse(mvaReaderCovU1_, varForCovU1_) * mvaOutputU_ * var_["particleFlow_U"], 2);
  mvaOutputCovU2_ = std::pow(GetResponse(mvaReaderCovU2_, varForCovU2_) * mvaOutputU_ * var_["particleFlow_U"], 2);
 
  // compute MET(Photon check)
  if (hasPhotons_) {
    //Fix events with unphysical properties
    double sumLeptonPt = std::max(sqrt(sumLeptonPx_ * sumLeptonPx_ + sumLeptonPy_ * sumLeptonPy_), 1.);
    if (var_["track_U"] / sumLeptonPt < 0.1 || var_["noPileUp_U"] / sumLeptonPt < 0.1) {
      mvaOutputU_ = 1.;
      mvaOutputDPhi_ = 0.;
    }
  }
  computeMET();
}
//-------------------------------------------------------------------------------
 
void PFMETAlgorithmMVA::computeMET() {
  double U = var_["RecoilCor_U"];
  double Phi = var_["PhiCor_UPhi"];
  if (U < 0.)
    Phi += Pi;  //RF: No sign flip for U necessary in that case?
  double cosPhi = std::cos(Phi);
  double sinPhi = std::sin(Phi);
  double metPx = U * cosPhi - sumLeptonPx_;
  double metPy = U * sinPhi - sumLeptonPy_;
  double metPt = sqrt(metPx * metPx + metPy * metPy);
  mvaMEt_.SetCoordinates(metPx, metPy, 0., metPt);
  // compute MET uncertainties in dirrections parallel and perpendicular to hadronic recoil
  // (neglecting uncertainties on lepton momenta)
  mvaMEtCov_(0, 0) = mvaOutputCovU1_ * cosPhi * cosPhi + mvaOutputCovU2_ * sinPhi * sinPhi;
  mvaMEtCov_(0, 1) = -mvaOutputCovU1_ * sinPhi * cosPhi + mvaOutputCovU2_ * sinPhi * cosPhi;
  mvaMEtCov_(1, 0) = mvaMEtCov_(0, 1);
  mvaMEtCov_(1, 1) = mvaOutputCovU1_ * sinPhi * sinPhi + mvaOutputCovU2_ * cosPhi * cosPhi;
}
 
//-------------------------------------------------------------------------------
const float PFMETAlgorithmMVA::GetResponse(const GBRForest* Reader, std::vector<std::string>& variableNames) {
  std::unique_ptr<float[]> mvaInputVector = createFloatVector(variableNames);
  double result = Reader->GetResponse(mvaInputVector.get());
  return result;
}
 
//-------------------------------------------------------------------------------
void PFMETAlgorithmMVA::print(std::ostream& stream) const {
  stream << "<PFMETAlgorithmMVA::print>:" << std::endl;
  for (const auto& entry : var_)
    stream << entry.first << " = " << entry.second << std::endl;
  stream << " covU1 = " << mvaOutputCovU1_ << ", covU2 = " << mvaOutputCovU2_ << std::endl;
  stream << " sum(leptons): Pt = " << sqrt(sumLeptonPx_ * sumLeptonPx_ + sumLeptonPy_ * sumLeptonPy_) << ","
         << " phi = " << atan2(sumLeptonPy_, sumLeptonPx_) << " "
         << "(Px = " << sumLeptonPx_ << ", Py = " << sumLeptonPy_ << ")";
  stream << " MVA output: U = " << mvaOutputU_ << ", dPhi = " << mvaOutputDPhi_ << ","
         << " covU1 = " << mvaOutputCovU1_ << ", covU2 = " << mvaOutputCovU2_ << std::endl;
  stream << std::endl;
}