#include <SiStripEventSummary.h>

Public Member Functions
const uint16_t &	apveAddress () const

void	apveAddress (uint16_t &addr)

const sistrip::ApvReadoutMode &	apvReadoutMode () const

const uint32_t &	binNumber () const

const uint32_t &	bx () const

void	bx (const uint32_t &)

const uint32_t &	calChan () const

const uint32_t &	calSel () const

void	commissioningInfo (const uint32_t &daq_register1, const uint32_t &daq_register2)

void	commissioningInfo (const uint32_t *const buffer, const uint32_t &event)

const uint32_t &	dcuId () const

const uint32_t &	deviceId () const

const uint32_t &	event () const

void	event (const uint32_t &)

const sistrip::FedReadoutMode &	fedReadoutMode () const

void	fedReadoutMode (const uint16_t &)

const uint32_t &	isha () const

bool	isSet () const

const uint32_t &	latency () const

const uint32_t &	layerScanned () const

const uint32_t &	lldBias () const

const uint32_t &	lldGain () const

const uint32_t &	nApvsErrors () const

void	nApvsErrors (uint32_t &napvs_with_errors)

const uint32_t &	nApvsInSync () const

void	nApvsInSync (uint32_t &napvs_in_sync)

const uint32_t &	nApvsOutOfSync () const

void	nApvsOutOfSync (uint32_t &napvs_out_of_sync)

bool	nullParams () const

const std::vector< uint32_t > &	params () const

const uint32_t &	pllCoarse () const

const uint32_t &	pllFine () const

const uint32_t &	processId () const

const uint32_t &	processIp () const

const sistrip::RunType &	runType () const

	SiStripEventSummary ()

uint16_t	triggerFed () const

void	triggerFed (const int16_t &)

const uint32_t &	ttcrx () const

bool	valid () const

const uint32_t &	vfs () const

const uint32_t &	vpsp () const

const uint32_t &	vpspCcuChan () const

	~SiStripEventSummary ()

Private Attributes
uint16_t	apveAddress_

sistrip::ApvReadoutMode	apvReadoutMode_

uint32_t	bx_

uint32_t	event_

sistrip::FedReadoutMode	fedReadoutMode_

uint32_t	nApvsErrors_

uint32_t	nApvsInSync_

uint32_t	nApvsOutOfSync_

uint32_t	nDataSenders_

std::vector< uint32_t >	params_

sistrip::RunType	runType_

uint32_t	spillNumber_

uint16_t	triggerFed_

bool	valid_

Detailed Description

Definition at line 22 of file SiStripEventSummary.h.

Constructor & Destructor Documentation

◆ SiStripEventSummary()

SiStripEventSummary::SiStripEventSummary ( )

Default constructor.

Definition at line 12 of file SiStripEventSummary.cc.

     : valid_(true),
       triggerFed_(0),
       runType_(sistrip::UNDEFINED_RUN_TYPE),
       event_(0),
       bx_(0),
       spillNumber_(0),
       nDataSenders_(0),
       fedReadoutMode_(sistrip::UNDEFINED_FED_READOUT_MODE),
       apvReadoutMode_(sistrip::UNDEFINED_APV_READOUT_MODE),
       apveAddress_(0),
       nApvsInSync_(0),
       nApvsOutOfSync_(0),
       nApvsErrors_(0),
       params_(5, 0) {
   ;
 }

◆ ~SiStripEventSummary()

SiStripEventSummary::~SiStripEventSummary ( )

inline

Default destructor.

Definition at line 30 of file SiStripEventSummary.h.

30 { ; }

Member Function Documentation

◆ apveAddress() [1/2]

const uint16_t & SiStripEventSummary::apveAddress ( ) const

inline

Returns APVE golden pipeline address.

Definition at line 225 of file SiStripEventSummary.h.

225 { return apveAddress_; }

References apveAddress_.

◆ apveAddress() [2/2]

void SiStripEventSummary::apveAddress ( uint16_t & addr )

inline

Definition at line 255 of file SiStripEventSummary.h.

255 { apveAddress_ = addr; }

References generateTowerEtThresholdLUT::addr, and apveAddress_.

◆ apvReadoutMode()

const sistrip::ApvReadoutMode & SiStripEventSummary::apvReadoutMode ( ) const

inline

Returns APV readout mode.

Definition at line 223 of file SiStripEventSummary.h.

223 { return apvReadoutMode_; }

References apvReadoutMode_.

◆ binNumber()

const uint32_t & SiStripEventSummary::binNumber ( ) const

inline

Returns bin number for very fast connection.

Definition at line 232 of file SiStripEventSummary.h.

232 { return params_[0]; }

References params_.

◆ bx() [1/2]

const uint32_t & SiStripEventSummary::bx ( ) const

inline

Returns bunch crossing number.

Definition at line 220 of file SiStripEventSummary.h.

220 { return bx_; }

References bx_.

Referenced by bx().

◆ bx() [2/2]

void SiStripEventSummary::bx ( const uint32_t & bx )

inline

Sets bunch crossing number.

Definition at line 253 of file SiStripEventSummary.h.

253 { bx_ = bx; }

References bx(), and bx_.

◆ calChan()

const uint32_t & SiStripEventSummary::calChan ( ) const

inline

Returns APV calibration channels (CDRV).

Definition at line 236 of file SiStripEventSummary.h.

236 { return params_[1]; }

References params_.

◆ calSel()

const uint32_t & SiStripEventSummary::calSel ( ) const

inline

Returns APV calibration timing (CSEL).

Definition at line 237 of file SiStripEventSummary.h.

237 { return params_[2]; }

References params_.

◆ commissioningInfo() [1/2]

void SiStripEventSummary::commissioningInfo	(	const uint32_t &	daq_register1,
		const uint32_t &	daq_register2
	)

Sets DAQ register information.

Definition at line 158 of file SiStripEventSummary.cc.

                                                                                       {
   // Extract if commissioning info are valid or not
   uint16_t temp = static_cast<uint16_t>((daq1 >> 8) & 0x3);
   if (temp == uint16_t(1)) {
     valid_ = true;
   } else if (temp == uint16_t(2)) {
     valid_ = false;
   } else if (temp == uint16_t(3) && daq1 == sistrip::invalid32_) {
     if (edm::isDebugEnabled()) {
       edm::LogWarning(mlDigis_) << "[SiStripEventSummary::" << __func__ << "]"
                                 << " DAQ register contents set to invalid: 0x" << std::hex << std::setw(8)
                                 << std::setfill('0') << daq1 << std::dec;
     }
     valid_ = false;
   } else {
     if (edm::isDebugEnabled()) {
       edm::LogWarning(mlDigis_) << "[SiStripEventSummary::" << __func__ << "]"
                                 << " Unexpected bit pattern set in DAQ1: 0x" << std::hex << std::setw(8)
                                 << std::setfill('0') << daq1 << std::dec;
     }
     valid_ = false;
   }
  
   // Set RunType
   uint16_t run = static_cast<uint16_t>(daq1 & 0xFF);
   runType_ = SiStripEnumsAndStrings::runType(run);
  
   // Set hardware parameters
   if (runType_ == sistrip::PHYSICS) {
   } else if (runType_ == sistrip::PHYSICS_ZS) {
   } else if (runType_ == sistrip::PEDESTALS) {
   } else if (runType_ == sistrip::DAQ_SCOPE_MODE) {
   } else if (runType_ == sistrip::CALIBRATION or runType_ == sistrip::CALIBRATION_DECO) {
     params_[0] = (daq2 >> 8) & 0xFF;  // latency
     params_[1] = (daq2 >> 4) & 0x0F;  // cal_chan
     params_[2] = (daq2 >> 0) & 0x0F;  // cal_sel
   } else if (runType_ == sistrip::CALIBRATION_SCAN or runType_ == sistrip::CALIBRATION_SCAN_DECO) {
     params_[0] = (daq2 >> 8) & 0xFF;   // latency
     params_[1] = (daq2 >> 4) & 0x0F;   // cal_chan
     params_[2] = (daq2 >> 0) & 0x0F;   // cal_sel
     params_[3] = (daq2 >> 16) & 0xFF;  // isha
     params_[4] = (daq2 >> 24);         // vfs
   } else if (runType_ == sistrip::OPTO_SCAN) {
     params_[0] = (daq2 >> 8) & 0xFF;  // opto gain
     params_[1] = (daq2 >> 0) & 0xFF;  // opto bias
   } else if (runType_ == sistrip::APV_TIMING) {
     params_[1] = (daq2 >> 0) & 0xFF;  // pll fine delay
   } else if (runType_ == sistrip::APV_LATENCY) {
     params_[0] = (daq2 >> 0) & 0xFF;  // latency
   } else if (runType_ == sistrip::FINE_DELAY_PLL) {
   } else if (runType_ == sistrip::FINE_DELAY_TTC) {
   } else if (runType_ == sistrip::FINE_DELAY) {            //@@ layer
     params_[2] = (daq2 >> 0) & 0xFFFF;                     // ttcrx delay
     params_[0] = params_[2] / 25;                          // pll coarse delay
     params_[1] = uint32_t((params_[2] % 25) * 24. / 25.);  // pll fine delay
     params_[3] = (daq2 >> 0) & 0xFFFF0000;                 // layer (private format: DDSSLLLL (det, side, layer)
   } else if (runType_ == sistrip::FED_TIMING) {
     params_[1] = (daq2 >> 0) & 0xFF;  // pll fine delay
   } else if (runType_ == sistrip::VPSP_SCAN) {
     params_[0] = (daq2 >> 8) & 0xFF;  // vpsp value
     params_[1] = (daq2 >> 0) & 0xFF;  // ccu channel
   } else if (runType_ == sistrip::FED_CABLING) {
   } else if (runType_ == sistrip::QUITE_FAST_CABLING) {
   } else if (runType_ == sistrip::FAST_CABLING) {
     params_[0] = (daq2 >> 0) & 0xFF;  // key
   } else {
     if (edm::isDebugEnabled()) {
       edm::LogWarning(mlDigis_) << "[SiStripEventSummary::" << __func__ << "]"
                                 << " Unexpected commissioning task: " << runType_;
     }
   }
 }

References sistrip::APV_LATENCY, sistrip::APV_TIMING, sistrip::CALIBRATION, sistrip::CALIBRATION_DECO, sistrip::CALIBRATION_SCAN, sistrip::CALIBRATION_SCAN_DECO, sistrip::DAQ_SCOPE_MODE, TauDecayModes::dec, sistrip::FAST_CABLING, sistrip::FED_CABLING, sistrip::FED_TIMING, sistrip::FINE_DELAY, sistrip::FINE_DELAY_PLL, sistrip::FINE_DELAY_TTC, sistrip::invalid32_, edm::isDebugEnabled(), sistrip::mlDigis_, sistrip::OPTO_SCAN, or, params_, sistrip::PEDESTALS, sistrip::PHYSICS, sistrip::PHYSICS_ZS, sistrip::QUITE_FAST_CABLING, writedatasetfile::run, SiStripEnumsAndStrings::runType(), runType_, groupFilesInBlocks::temp, valid_, and sistrip::VPSP_SCAN.

◆ commissioningInfo() [2/2]

void SiStripEventSummary::commissioningInfo	(	const uint32_t *const	buffer,
		const uint32_t &	event
	)

Sets commissioning-related information.

Definition at line 32 of file SiStripEventSummary.cc.

                                                                                                {
   // Set RunType
   uint16_t run = static_cast<uint16_t>(buffer[10] & 0xFFFF);
   runType_ = SiStripEnumsAndStrings::runType(run);
  
   // Set spill number
   spillNumber_ = buffer[0];
  
   // Set number of DataSenders
   nDataSenders_ = buffer[20];
  
   // Set FED readout mode
   if (buffer[15] == 0) {
     fedReadoutMode_ = sistrip::FED_SCOPE_MODE;
   } else if (buffer[15] == 1) {
     fedReadoutMode_ = sistrip::FED_VIRGIN_RAW;
   } else if (buffer[15] == 2) {
     fedReadoutMode_ = sistrip::FED_PROC_RAW;
   } else if (buffer[15] == 3) {
     fedReadoutMode_ = sistrip::FED_ZERO_SUPPR;
   } else if (buffer[15] == 4) {
     fedReadoutMode_ = sistrip::FED_ZERO_SUPPR_LITE;
   } else {
     fedReadoutMode_ = sistrip::UNKNOWN_FED_READOUT_MODE;
   }
  
   // Set hardware parameters
   if (runType_ == sistrip::CALIBRATION || runType_ == sistrip::CALIBRATION_DECO ||
       runType_ == sistrip::CALIBRATION_SCAN || runType_ == sistrip::CALIBRATION_SCAN_DECO ||
       runType_ == sistrip::APV_LATENCY) {
     params_[0] = buffer[11];  // latency
     params_[1] = buffer[12];  // cal_chan
     params_[2] = buffer[13];  // cal_sel
     params_[3] = buffer[15];  // isha
     params_[4] = buffer[16];  // vfs
  
   } else if (runType_ == sistrip::OPTO_SCAN) {
     params_[0] = buffer[11];  // opto gain
     params_[1] = buffer[12];  // opto bias
  
   } else if (runType_ == sistrip::APV_TIMING || runType_ == sistrip::FED_TIMING) {
     params_[0] = buffer[11];                     // pll coarse delay
     params_[1] = buffer[12];                     // pll fine delay
     params_[2] = buffer[13];                     // ttcrx delay
   } else if (runType_ == sistrip::FINE_DELAY ||  //@@ layer
              runType_ == sistrip::FINE_DELAY_PLL || runType_ == sistrip::FINE_DELAY_TTC) {
     params_[0] = buffer[11];  // pll coarse delay
     params_[1] = buffer[12];  // pll fine delay
     params_[2] = buffer[13];  // ttcrx delay
     params_[3] = buffer[14];  // layer (private format: DDSSLLLL, det, side, layer)
  
   } else if (runType_ == sistrip::FAST_CABLING) {
     params_[0] = buffer[11];  // bin number
     params_[1] = buffer[12];  // fec instance
     params_[2] = buffer[13];  // fec ip
     params_[3] = buffer[14];  // dcu hard id
  
   } else if (runType_ == sistrip::FED_CABLING || runType_ == sistrip::QUITE_FAST_CABLING) {
     if (runType_ == sistrip::QUITE_FAST_CABLING) {
       uint16_t ii = 0;
       bool found = false;
       while (!found && ii < 20) {
         uint32_t dcu = buffer[21 + 3 * ii];
         uint32_t key = buffer[21 + 3 * ii + 1];
         uint32_t evt = buffer[21 + 3 * ii + 2];
         if (evt == event) {
           params_[0] = key;  // device id
           params_[1] = 0;    // process id
           params_[2] = 0;    // process ip
           params_[3] = dcu;  // dcu hard id
           found = true;
         }
         ii++;
       }
       if (!found) {
         if (edm::isDebugEnabled()) {
           std::stringstream ss;
           ss << "[SiStripEventSummary::" << __func__ << "]"
              << " Did not find DeviceId/DCUid for event " << event << "!";
           edm::LogWarning(mlDigis_) << ss.str();
         }
         params_[0] = 0;
         params_[1] = 0;
         params_[2] = 0;
         params_[3] = 0;
       } else {
         if (edm::isDebugEnabled()) {
           std::stringstream ss;
           ss << "[SiStripEventSummary::" << __func__ << "]"
              << " Found DeviceId/DCUid for event " << event << ": 0x" << std::hex << std::setw(8) << std::setfill('0')
              << params_[0] << std::dec << "/0x" << std::hex << std::setw(8) << std::setfill('0') << params_[3]
              << std::dec;
           LogTrace(mlDigis_) << ss.str();
         }
       }
  
     } else {
       params_[0] = buffer[11];  // device id
       params_[1] = buffer[12];  // process id
       params_[2] = buffer[13];  // process ip
       params_[3] = buffer[14];  // dcu hard id
     }
  
   } else if (runType_ == sistrip::VPSP_SCAN) {
     params_[0] = buffer[11];  // vpsp value
     params_[1] = buffer[12];  // ccu channel
  
   } else if (runType_ == sistrip::DAQ_SCOPE_MODE) {
     // nothing interesting!
  
   } else if (runType_ == sistrip::PHYSICS || runType_ == sistrip::PHYSICS_ZS || runType_ == sistrip::PEDESTALS) {
     //@@ do anything?...
  
   } else {
     if (edm::isDebugEnabled()) {
       edm::LogWarning(mlDigis_) << "[SiStripEventSummary::" << __func__ << "]"
                                 << " Unexpected commissioning task: " << runType_;
     }
   }
 }

References sistrip::APV_LATENCY, sistrip::APV_TIMING, edmScanValgrind::buffer, sistrip::CALIBRATION, sistrip::CALIBRATION_DECO, sistrip::CALIBRATION_SCAN, sistrip::CALIBRATION_SCAN_DECO, sistrip::DAQ_SCOPE_MODE, TauDecayModes::dec, sistrip::FAST_CABLING, sistrip::FED_CABLING, sistrip::FED_PROC_RAW, sistrip::FED_SCOPE_MODE, sistrip::FED_TIMING, sistrip::FED_VIRGIN_RAW, sistrip::FED_ZERO_SUPPR, sistrip::FED_ZERO_SUPPR_LITE, fedReadoutMode_, sistrip::FINE_DELAY, sistrip::FINE_DELAY_PLL, sistrip::FINE_DELAY_TTC, newFWLiteAna::found, cuy::ii, edm::isDebugEnabled(), crabWrapper::key, LogTrace, sistrip::mlDigis_, nDataSenders_, sistrip::OPTO_SCAN, params_, sistrip::PEDESTALS, sistrip::PHYSICS, sistrip::PHYSICS_ZS, sistrip::QUITE_FAST_CABLING, writedatasetfile::run, SiStripEnumsAndStrings::runType(), runType_, spillNumber_, contentValuesCheck::ss, sistrip::UNKNOWN_FED_READOUT_MODE, and sistrip::VPSP_SCAN.

◆ dcuId()

const uint32_t & SiStripEventSummary::dcuId ( ) const

inline

Returns DCU id.

Definition at line 248 of file SiStripEventSummary.h.

248 { return params_[3]; }

References params_.

◆ deviceId()

const uint32_t & SiStripEventSummary::deviceId ( ) const

inline

Returns device id.

Definition at line 245 of file SiStripEventSummary.h.

245 { return params_[0]; }

References params_.

◆ event() [1/2]

const uint32_t & SiStripEventSummary::event ( ) const

inline

Returns event number.

Definition at line 219 of file SiStripEventSummary.h.

219 { return event_; }

References event_.

Referenced by Types.EventID::cppID(), and event().

◆ event() [2/2]

void SiStripEventSummary::event ( const uint32_t & event )

inline

Sets event number.

Definition at line 252 of file SiStripEventSummary.h.

252 { event_ = event; }

References event(), and event_.

Referenced by Types.EventID::cppID().

◆ fedReadoutMode() [1/2]

const sistrip::FedReadoutMode & SiStripEventSummary::fedReadoutMode ( ) const

inline

Returns FED readout mode.

Definition at line 222 of file SiStripEventSummary.h.

222 { return fedReadoutMode_; }

References fedReadoutMode_.

◆ fedReadoutMode() [2/2]

void SiStripEventSummary::fedReadoutMode ( const uint16_t & mode )

Sets FED readout mode.

Definition at line 233 of file SiStripEventSummary.cc.

                                                              {
   if (mode == 1) {
     fedReadoutMode_ = sistrip::FED_SCOPE_MODE;
   } else if (mode == 2) {
     fedReadoutMode_ = sistrip::FED_VIRGIN_RAW;
   } else if (mode == 6) {
     fedReadoutMode_ = sistrip::FED_PROC_RAW;
   } else if (mode == 10) {
     fedReadoutMode_ = sistrip::FED_ZERO_SUPPR;
   } else if (mode == 12) {
     fedReadoutMode_ = sistrip::FED_ZERO_SUPPR_LITE;
   } else {
     fedReadoutMode_ = sistrip::UNKNOWN_FED_READOUT_MODE;
   }
 }

References sistrip::FED_PROC_RAW, sistrip::FED_SCOPE_MODE, sistrip::FED_VIRGIN_RAW, sistrip::FED_ZERO_SUPPR, sistrip::FED_ZERO_SUPPR_LITE, fedReadoutMode_, ALCARECOPromptCalibProdSiPixelAli0T_cff::mode, and sistrip::UNKNOWN_FED_READOUT_MODE.

◆ isha()

const uint32_t & SiStripEventSummary::isha ( ) const

inline

Returns APV ISHA.

Definition at line 238 of file SiStripEventSummary.h.

238 { return params_[3]; }

References params_.

◆ isSet()

bool SiStripEventSummary::isSet ( ) const

inline

Flag to identify if commissioning info already set.

Definition at line 216 of file SiStripEventSummary.h.

216 { return (/* triggerFed_ > 0 && */ runType_ != sistrip::UNDEFINED_RUN_TYPE); }

References runType_, and sistrip::UNDEFINED_RUN_TYPE.

◆ latency()

const uint32_t & SiStripEventSummary::latency ( ) const

inline

Returns APV latency setting.

Definition at line 235 of file SiStripEventSummary.h.

235 { return params_[0]; }

References params_.

◆ layerScanned()

const uint32_t & SiStripEventSummary::layerScanned ( ) const

inline

Returns the layer mask for fine delay runs

Definition at line 249 of file SiStripEventSummary.h.

249 { return params_[3]; }

References params_.

◆ lldBias()

const uint32_t & SiStripEventSummary::lldBias ( ) const

inline

Returns LLD bias setting.

Definition at line 244 of file SiStripEventSummary.h.

244 { return params_[1]; }

References params_.

◆ lldGain()

const uint32_t & SiStripEventSummary::lldGain ( ) const

inline

Returns LLD gain setting.

Definition at line 243 of file SiStripEventSummary.h.

243 { return params_[0]; }

References params_.

◆ nApvsErrors() [1/2]

const uint32_t & SiStripEventSummary::nApvsErrors ( ) const

inline

Returns number of APVs with error flags set.

Definition at line 228 of file SiStripEventSummary.h.

228 { return nApvsErrors_; }

References nApvsErrors_.

◆ nApvsErrors() [2/2]

void SiStripEventSummary::nApvsErrors ( uint32_t & napvs_with_errors )

inline

Definition at line 258 of file SiStripEventSummary.h.

258 { nApvsErrors_ = napvs_with_errors; }

References nApvsErrors_.

◆ nApvsInSync() [1/2]

const uint32_t & SiStripEventSummary::nApvsInSync ( ) const

inline

Returns number of APVs that are synchronized.

Definition at line 226 of file SiStripEventSummary.h.

226 { return nApvsInSync_; }

References nApvsInSync_.

◆ nApvsInSync() [2/2]

void SiStripEventSummary::nApvsInSync ( uint32_t & napvs_in_sync )

inline

Definition at line 256 of file SiStripEventSummary.h.

256 { nApvsInSync_ = napvs_in_sync; }

References nApvsInSync_.

◆ nApvsOutOfSync() [1/2]

const uint32_t & SiStripEventSummary::nApvsOutOfSync ( ) const

inline

Returns number of APVs that are not synchronized.

Definition at line 227 of file SiStripEventSummary.h.

227 { return nApvsOutOfSync_; }

References nApvsOutOfSync_.

◆ nApvsOutOfSync() [2/2]

void SiStripEventSummary::nApvsOutOfSync ( uint32_t & napvs_out_of_sync )

inline

Definition at line 257 of file SiStripEventSummary.h.

257 { nApvsOutOfSync_ = napvs_out_of_sync; }

References nApvsOutOfSync_.

◆ nullParams()

bool SiStripEventSummary::nullParams ( ) const

inline

Indicates whether all params are null or not.

Definition at line 230 of file SiStripEventSummary.h.

230 { return (!params_[0] && !params_[1] && !params_[2] && !params_[3]); }

References params_.

◆ params()

const std::vector< uint32_t > & SiStripEventSummary::params ( ) const

inline

Returns values of all params.

Definition at line 231 of file SiStripEventSummary.h.

231 { return params_; }

References params_.

◆ pllCoarse()

const uint32_t & SiStripEventSummary::pllCoarse ( ) const

inline

Returns PLL coarse delay setting.

Definition at line 233 of file SiStripEventSummary.h.

233 { return params_[0]; }

References params_.

◆ pllFine()

const uint32_t & SiStripEventSummary::pllFine ( ) const

inline

Returns PLL fine delay setting.

Definition at line 234 of file SiStripEventSummary.h.

234 { return params_[1]; }

References params_.

◆ processId()

const uint32_t & SiStripEventSummary::processId ( ) const

inline

Returns process id.

Definition at line 246 of file SiStripEventSummary.h.

246 { return params_[1]; }

References params_.

◆ processIp()

const uint32_t & SiStripEventSummary::processIp ( ) const

inline

Returns process IP address.

Definition at line 247 of file SiStripEventSummary.h.

247 { return params_[2]; }

References params_.

◆ runType()

const sistrip::RunType & SiStripEventSummary::runType ( ) const

inline

Returns run type.

Definition at line 218 of file SiStripEventSummary.h.

218 { return runType_; }

References runType_.

Referenced by SiStripFineDelayHit::produce().

◆ triggerFed() [1/2]

uint16_t SiStripEventSummary::triggerFed ( ) const

inline

Identifier of trigger FED (null value means not found).

Definition at line 215 of file SiStripEventSummary.h.

215 { return triggerFed_; }

References triggerFed_.

◆ triggerFed() [2/2]

void SiStripEventSummary::triggerFed ( const int16_t & fed )

inline

Sets trigger FED number.

Definition at line 251 of file SiStripEventSummary.h.

251 { fed < 0 ? triggerFed_ = 0 : triggerFed_ = fed; }

References triggerFed_.

◆ ttcrx()

const uint32_t & SiStripEventSummary::ttcrx ( ) const

inline

Returns TTCrx delay setting.

Definition at line 240 of file SiStripEventSummary.h.

240 { return params_[2]; }

References params_.

◆ valid()

bool SiStripEventSummary::valid ( ) const

inline

Identifies if commissioning info is valid or not (when using global trigger to understand if HW config is being changed).

Definition at line 214 of file SiStripEventSummary.h.

214 { return valid_; }

References valid_.

◆ vfs()

const uint32_t & SiStripEventSummary::vfs ( ) const

inline

Returns APV VFS.

Definition at line 239 of file SiStripEventSummary.h.

239 { return params_[4]; }

References params_.

◆ vpsp()

const uint32_t & SiStripEventSummary::vpsp ( ) const

inline

Returns VPSP setting.

Definition at line 241 of file SiStripEventSummary.h.

241 { return params_[0]; }

References params_.

◆ vpspCcuChan()

const uint32_t & SiStripEventSummary::vpspCcuChan ( ) const

inline

Returns CCU channel of module being tuned for VPSP.

Definition at line 242 of file SiStripEventSummary.h.

242 { return params_[1]; }

References params_.

Member Data Documentation

◆ apveAddress_

uint16_t SiStripEventSummary::apveAddress_

private

APVE golden pipeline address.

Definition at line 197 of file SiStripEventSummary.h.

Referenced by apveAddress().

◆ apvReadoutMode_

sistrip::ApvReadoutMode SiStripEventSummary::apvReadoutMode_

private

APV readout mode.

Definition at line 194 of file SiStripEventSummary.h.

Referenced by apvReadoutMode().

◆ bx_

uint32_t SiStripEventSummary::bx_

private

Bunch crossing number.

Definition at line 180 of file SiStripEventSummary.h.

Referenced by bx().

◆ event_

uint32_t SiStripEventSummary::event_

private

Event number.

Definition at line 177 of file SiStripEventSummary.h.

Referenced by event().

◆ fedReadoutMode_

sistrip::FedReadoutMode SiStripEventSummary::fedReadoutMode_

private

FED readout mode.

Definition at line 191 of file SiStripEventSummary.h.

Referenced by commissioningInfo(), and fedReadoutMode().

◆ nApvsErrors_

uint32_t SiStripEventSummary::nApvsErrors_

private

Number of APVs with error flags set.

Definition at line 206 of file SiStripEventSummary.h.

Referenced by nApvsErrors().

◆ nApvsInSync_

uint32_t SiStripEventSummary::nApvsInSync_

private

Number of APVs that are synchronized.

Definition at line 200 of file SiStripEventSummary.h.

Referenced by nApvsInSync().

◆ nApvsOutOfSync_

uint32_t SiStripEventSummary::nApvsOutOfSync_

private

Number of APVs that are not synchronized.

Definition at line 203 of file SiStripEventSummary.h.

Referenced by nApvsOutOfSync().

◆ nDataSenders_

uint32_t SiStripEventSummary::nDataSenders_

private

Number of DataSenders (c.f. ReadoutUnits).

Definition at line 186 of file SiStripEventSummary.h.

Referenced by commissioningInfo().

◆ params_

std::vector<uint32_t> SiStripEventSummary::params_

private

Parameters related to commissioning analysis.

Definition at line 209 of file SiStripEventSummary.h.

Referenced by binNumber(), calChan(), calSel(), commissioningInfo(), dcuId(), deviceId(), isha(), latency(), layerScanned(), lldBias(), lldGain(), nullParams(), params(), pllCoarse(), pllFine(), processId(), processIp(), ttcrx(), vfs(), vpsp(), and vpspCcuChan().

◆ runType_

sistrip::RunType SiStripEventSummary::runType_

private

Run type.

Definition at line 174 of file SiStripEventSummary.h.

Referenced by commissioningInfo(), isSet(), and runType().

◆ spillNumber_

uint32_t SiStripEventSummary::spillNumber_

private

Spill number.

Definition at line 183 of file SiStripEventSummary.h.

Referenced by commissioningInfo().

◆ triggerFed_

uint16_t SiStripEventSummary::triggerFed_

private

Definition at line 169 of file SiStripEventSummary.h.

Referenced by triggerFed().

◆ valid_

bool SiStripEventSummary::valid_

private

Flag to signify if trigger FED information is valid.

Definition at line 166 of file SiStripEventSummary.h.

Referenced by commissioningInfo(), and valid().

Public Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ SiStripEventSummary()

◆ ~SiStripEventSummary()

Member Function Documentation

◆ apveAddress() [1/2]

◆ apveAddress() [2/2]

◆ apvReadoutMode()

◆ binNumber()

◆ bx() [1/2]

◆ bx() [2/2]

◆ calChan()

◆ calSel()

◆ commissioningInfo() [1/2]

◆ commissioningInfo() [2/2]

◆ dcuId()

◆ deviceId()

◆ event() [1/2]

◆ event() [2/2]

◆ fedReadoutMode() [1/2]

◆ fedReadoutMode() [2/2]

◆ isha()

◆ isSet()

◆ latency()

◆ layerScanned()

◆ lldBias()

◆ lldGain()

◆ nApvsErrors() [1/2]

◆ nApvsErrors() [2/2]

◆ nApvsInSync() [1/2]

◆ nApvsInSync() [2/2]

◆ nApvsOutOfSync() [1/2]

◆ nApvsOutOfSync() [2/2]

◆ nullParams()

◆ params()

◆ pllCoarse()

◆ pllFine()

◆ processId()

◆ processIp()

◆ runType()

◆ triggerFed() [1/2]

◆ triggerFed() [2/2]

◆ ttcrx()

◆ valid()

◆ vfs()

◆ vpsp()

◆ vpspCcuChan()

Member Data Documentation

◆ apveAddress_

◆ apvReadoutMode_

◆ bx_

◆ event_

◆ fedReadoutMode_

◆ nApvsErrors_

◆ nApvsInSync_

◆ nApvsOutOfSync_

◆ nDataSenders_

◆ params_

◆ runType_

◆ spillNumber_

◆ triggerFed_

◆ valid_