heepElectronID_tools Namespace Reference

Classes
class	HEEP_WorkingPoint_V1
class	HEEP_WorkingPoint_V2

Functions
def	addHEEPProducersToSeq (process, seq, useMiniAOD, task=None)
def	addHEEPVMProducerToSeq (process, seq, useMiniAOD, task=None)
def	configureHEEPElectronID_V51 (wpEB, wpEE)
def	configureHEEPElectronID_V60 (wpEB, wpEE)
def	configureHEEPElectronID_V60_80XAOD (idName, wpEB, wpEE)
def	configureHEEPElectronID_V61 (wpEB, wpEE)
def	configureHEEPElectronID_V70 (idName, wpEB, wpEE)
def	configureHEEPElectronID_V71 (idName, wpEB, wpEE, minEt)
def	psetGsfEleDEtaInSeedCut (wpEB, wpEE)
def	psetGsfEleDPhiInCut (wpEB, wpEE)
def	psetGsfEleDxyCut (wpEB, wpEE)
def	psetGsfEleEcalDrivenCut (wpEB, wpEE)
def	psetGsfEleEmHadD1IsoRhoCut (wpEB, wpEE, energyType="EcalTrk")
def	psetGsfEleFull5x5E2x5OverE5x5Cut (wpEB, wpEE)
def	psetGsfEleFull5x5E2x5OverE5x5WithSatCut (wpEB, wpEE)
def	psetGsfEleFull5x5SigmaIEtaIEtaCut (wpEB, wpEE)
def	psetGsfEleFull5x5SigmaIEtaIEtaWithSatCut (wpEB, wpEE)
def	psetGsfEleHadronicOverEMLinearCut (wpEB, wpEE)
def	psetGsfEleMissingHitsCut (wpEB, wpEE)
def	psetGsfEleSCEtaMultiRangeCut ()
def	psetGsfEleTrkPtFall16IsoCut (wpEB, wpEE)
def	psetGsfEleTrkPtIsoCut (wpEB, wpEE, useHEEPIso=False)
def	psetGsfEleTrkPtIsoRhoCut (wpEB, wpEE)
def	psetGsfEleTrkPtNoJetCoreIsoCut (wpEB, wpEE)
def	psetMinEcalEtCut (cutValue=5.)
def	psetMinPtCut (cutValue=35.)

Variables
	ebCutOff
	ebMax
	eeMin

Function Documentation

addHEEPProducersToSeq()

def heepElectronID_tools.addHEEPProducersToSeq	(		process,
			seq,
			useMiniAOD,
			task = None
	)

currently no additional products are needed to run the HEEP ID so this 
function simply remains as a placeholder

Definition at line 576 of file heepElectronID_tools.py.

def addHEEPProducersToSeq(process,seq,useMiniAOD, task=None):
    '''currently no additional products are needed to run the HEEP ID so this 
    function simply remains as a placeholder
    '''
    return

Referenced by vid_id_tools.setupVIDElectronSelection().

addHEEPVMProducerToSeq()

def heepElectronID_tools.addHEEPVMProducerToSeq	(		process,
			seq,
			useMiniAOD,
			task = None
	)

Definition at line 548 of file heepElectronID_tools.py.

def addHEEPVMProducerToSeq(process,seq,useMiniAOD, task=None):
    newTask = cms.Task()
    seq.associate(newTask)
    if task is not None:
        task.add(newTask)
 
    process.load("RecoEgamma.ElectronIdentification.heepIdVarValueMapProducer_cfi")
    newTask.add(process.heepIDVarValueMaps)
 
    if useMiniAOD==False:
        process.load("TrackingTools.TransientTrack.TransientTrackBuilder_cfi")
        process.load("PhysicsTools.PatAlgos.slimming.primaryVertexAssociation_cfi")
        process.load("PhysicsTools.PatAlgos.slimming.offlineSlimmedPrimaryVertices_cfi")
        process.load("PhysicsTools.PatAlgos.slimming.packedPFCandidates_cfi") 
        from PhysicsTools.PatAlgos.slimming.packedPFCandidates_cfi import packedPFCandidates
        process.packedCandsForTkIso = packedPFCandidates.clone()
        process.packedCandsForTkIso.PuppiSrc=cms.InputTag("")
        process.packedCandsForTkIso.PuppiNoLepSrc=cms.InputTag("")
        
        process.load("PhysicsTools.PatAlgos.slimming.lostTracks_cfi")
        from PhysicsTools.PatAlgos.slimming.lostTracks_cfi import lostTracks
        process.lostTracksForTkIso = lostTracks.clone()
        process.lostTracksForTkIso.packedPFCandidates =cms.InputTag("packedCandsForTkIso")
        newTask.add(process.primaryVertexAssociation,
                    process.offlineSlimmedPrimaryVertices,
                    process.packedCandsForTkIso,
                    process.lostTracksForTkIso)
 

configureHEEPElectronID_V51()

def heepElectronID_tools.configureHEEPElectronID_V51	(		wpEB,
			wpEE
	)

This function configures the full cms.PSet for a VID ID and returns it.
The inputs: two objects of the type HEEP_WorkingPoint_V1, one
containing the cuts for the Barrel (EB) and the other one for the Endcap (EE).

Definition at line 396 of file heepElectronID_tools.py.

def configureHEEPElectronID_V51(wpEB, wpEE):
    """
    This function configures the full cms.PSet for a VID ID and returns it.
    The inputs: two objects of the type HEEP_WorkingPoint_V1, one
    containing the cuts for the Barrel (EB) and the other one for the Endcap (EE).
    """
    parameterSet = cms.PSet(
        idName = cms.string("heepElectronID-HEEPV51"),
        cutFlow = cms.VPSet(
            psetMinPtCut(cutValue=35.),                   #0
            psetGsfEleSCEtaMultiRangeCut(),               #1
            psetGsfEleDEtaInSeedCut(wpEB,wpEE),           #2
            psetGsfEleDPhiInCut(wpEB,wpEE),               #3
            psetGsfEleFull5x5SigmaIEtaIEtaCut(wpEB,wpEE), #4
            psetGsfEleFull5x5E2x5OverE5x5Cut(wpEB,wpEE),  #5
            psetGsfEleHadronicOverEMLinearCut(wpEB,wpEE), #6 
            psetGsfEleTrkPtIsoCut(wpEB,wpEE),             #7
            psetGsfEleEmHadD1IsoRhoCut(wpEB,wpEE),        #8
            psetGsfEleDxyCut(wpEB,wpEE),                  #9
            psetGsfEleMissingHitsCut(wpEB,wpEE),          #10,
            psetGsfEleEcalDrivenCut(wpEB,wpEE)            #11
            )
        )
    return parameterSet
 

References psetGsfEleDEtaInSeedCut(), psetGsfEleDPhiInCut(), psetGsfEleDxyCut(), psetGsfEleEcalDrivenCut(), psetGsfEleEmHadD1IsoRhoCut(), psetGsfEleFull5x5E2x5OverE5x5Cut(), psetGsfEleFull5x5SigmaIEtaIEtaCut(), psetGsfEleHadronicOverEMLinearCut(), psetGsfEleMissingHitsCut(), psetGsfEleSCEtaMultiRangeCut(), psetGsfEleTrkPtIsoCut(), and psetMinPtCut().

configureHEEPElectronID_V60()

def heepElectronID_tools.configureHEEPElectronID_V60	(		wpEB,
			wpEE
	)

This function configures the full cms.PSet for a VID ID and returns it.
The inputs: two objects of the type HEEP_WorkingPoint_V1, one
containing the cuts for the Barrel (EB) and the other one for the Endcap (EE).

Definition at line 421 of file heepElectronID_tools.py.

def configureHEEPElectronID_V60(wpEB, wpEE):
    """
    This function configures the full cms.PSet for a VID ID and returns it.
    The inputs: two objects of the type HEEP_WorkingPoint_V1, one
    containing the cuts for the Barrel (EB) and the other one for the Endcap (EE).
    """
    parameterSet = cms.PSet(
        idName = cms.string("heepElectronID-HEEPV60"),
        cutFlow = cms.VPSet(
            psetMinPtCut(cutValue=35.),                   #0
            psetGsfEleSCEtaMultiRangeCut(),               #1
            psetGsfEleDEtaInSeedCut(wpEB,wpEE),           #2
            psetGsfEleDPhiInCut(wpEB,wpEE),               #3
            psetGsfEleFull5x5SigmaIEtaIEtaCut(wpEB,wpEE), #4
            psetGsfEleFull5x5E2x5OverE5x5Cut(wpEB,wpEE),  #5
            psetGsfEleHadronicOverEMLinearCut(wpEB,wpEE), #6 
            psetGsfEleTrkPtIsoCut(wpEB,wpEE),             #7
            psetGsfEleEmHadD1IsoRhoCut(wpEB,wpEE),        #8
            psetGsfEleDxyCut(wpEB,wpEE),                  #9
            psetGsfEleMissingHitsCut(wpEB,wpEE),          #10,
            psetGsfEleEcalDrivenCut(wpEB,wpEE)            #11
            )
        )
    return parameterSet
 
 

References psetGsfEleDEtaInSeedCut(), psetGsfEleDPhiInCut(), psetGsfEleDxyCut(), psetGsfEleEcalDrivenCut(), psetGsfEleEmHadD1IsoRhoCut(), psetGsfEleFull5x5E2x5OverE5x5Cut(), psetGsfEleFull5x5SigmaIEtaIEtaCut(), psetGsfEleHadronicOverEMLinearCut(), psetGsfEleMissingHitsCut(), psetGsfEleSCEtaMultiRangeCut(), psetGsfEleTrkPtIsoCut(), and psetMinPtCut().

configureHEEPElectronID_V60_80XAOD()

def heepElectronID_tools.configureHEEPElectronID_V60_80XAOD	(		idName,
			wpEB,
			wpEE
	)

This function configures the full cms.PSet for a VID ID and returns it.
The inputs: two objects of the type HEEP_WorkingPoint_V1, one
containing the cuts for the Barrel (EB) and the other one for the Endcap (EE).

Definition at line 498 of file heepElectronID_tools.py.

def configureHEEPElectronID_V60_80XAOD(idName, wpEB, wpEE):
    """
    This function configures the full cms.PSet for a VID ID and returns it.
    The inputs: two objects of the type HEEP_WorkingPoint_V1, one
    containing the cuts for the Barrel (EB) and the other one for the Endcap (EE).
    """
    parameterSet = cms.PSet(
        idName = cms.string(idName),
        cutFlow = cms.VPSet(
            psetMinPtCut(cutValue=35.),                   #0
            psetGsfEleSCEtaMultiRangeCut(),               #1
            psetGsfEleDEtaInSeedCut(wpEB,wpEE),           #2
            psetGsfEleDPhiInCut(wpEB,wpEE),               #3
            psetGsfEleFull5x5SigmaIEtaIEtaWithSatCut(wpEB,wpEE), #4
            psetGsfEleFull5x5E2x5OverE5x5WithSatCut(wpEB,wpEE),  #5
            psetGsfEleHadronicOverEMLinearCut(wpEB,wpEE), #6 
            psetGsfEleTrkPtNoJetCoreIsoCut(wpEB,wpEE),    #7
            psetGsfEleEmHadD1IsoRhoCut(wpEB,wpEE),        #8
            psetGsfEleDxyCut(wpEB,wpEE),                  #9
            psetGsfEleMissingHitsCut(wpEB,wpEE),          #10,
            psetGsfEleEcalDrivenCut(wpEB,wpEE)            #11
            )
        )
    return parameterSet
 

References psetGsfEleDEtaInSeedCut(), psetGsfEleDPhiInCut(), psetGsfEleDxyCut(), psetGsfEleEcalDrivenCut(), psetGsfEleEmHadD1IsoRhoCut(), psetGsfEleFull5x5E2x5OverE5x5WithSatCut(), psetGsfEleFull5x5SigmaIEtaIEtaWithSatCut(), psetGsfEleHadronicOverEMLinearCut(), psetGsfEleMissingHitsCut(), psetGsfEleSCEtaMultiRangeCut(), psetGsfEleTrkPtNoJetCoreIsoCut(), and psetMinPtCut().

configureHEEPElectronID_V61()

def heepElectronID_tools.configureHEEPElectronID_V61	(		wpEB,
			wpEE
	)

This function configures the full cms.PSet for a VID ID and returns it.
The inputs: two objects of the type HEEP_WorkingPoint_V2, one
containing the cuts for the Barrel (EB) and the other one for the Endcap (EE).

Definition at line 523 of file heepElectronID_tools.py.

def configureHEEPElectronID_V61(wpEB, wpEE):
    """
    This function configures the full cms.PSet for a VID ID and returns it.
    The inputs: two objects of the type HEEP_WorkingPoint_V2, one
    containing the cuts for the Barrel (EB) and the other one for the Endcap (EE).
    """
    parameterSet = cms.PSet(
        idName = cms.string("heepElectronID-HEEPV61"),
        cutFlow = cms.VPSet(
            psetMinPtCut(cutValue=35.),                   #0
            psetGsfEleSCEtaMultiRangeCut(),               #1
            psetGsfEleDEtaInSeedCut(wpEB,wpEE),           #2
            psetGsfEleDPhiInCut(wpEB,wpEE),               #3
            psetGsfEleFull5x5SigmaIEtaIEtaCut(wpEB,wpEE), #4
            psetGsfEleFull5x5E2x5OverE5x5Cut(wpEB,wpEE),  #5
            psetGsfEleHadronicOverEMLinearCut(wpEB,wpEE), #6 
            psetGsfEleTrkPtIsoRhoCut(wpEB,wpEE),          #7
            psetGsfEleEmHadD1IsoRhoCut(wpEB,wpEE),        #8
            psetGsfEleDxyCut(wpEB,wpEE),                  #9
            psetGsfEleMissingHitsCut(wpEB,wpEE),          #10,
            psetGsfEleEcalDrivenCut(wpEB,wpEE)            #11
            )
        )
    return parameterSet
 

References psetGsfEleDEtaInSeedCut(), psetGsfEleDPhiInCut(), psetGsfEleDxyCut(), psetGsfEleEcalDrivenCut(), psetGsfEleEmHadD1IsoRhoCut(), psetGsfEleFull5x5E2x5OverE5x5Cut(), psetGsfEleFull5x5SigmaIEtaIEtaCut(), psetGsfEleHadronicOverEMLinearCut(), psetGsfEleMissingHitsCut(), psetGsfEleSCEtaMultiRangeCut(), psetGsfEleTrkPtIsoRhoCut(), and psetMinPtCut().

configureHEEPElectronID_V70()

def heepElectronID_tools.configureHEEPElectronID_V70	(		idName,
			wpEB,
			wpEE
	)

This function configures the full cms.PSet for a VID ID and returns it.
The inputs: two objects of the type HEEP_WorkingPoint_V1, one
containing the cuts for the Barrel (EB) and the other one for the Endcap (EE).

Definition at line 447 of file heepElectronID_tools.py.

def configureHEEPElectronID_V70(idName, wpEB, wpEE):
    """
    This function configures the full cms.PSet for a VID ID and returns it.
    The inputs: two objects of the type HEEP_WorkingPoint_V1, one
    containing the cuts for the Barrel (EB) and the other one for the Endcap (EE).
    """
    parameterSet = cms.PSet(
        idName = cms.string(idName),
        cutFlow = cms.VPSet(
            psetMinPtCut(cutValue=35.),                   #0
            psetGsfEleSCEtaMultiRangeCut(),               #1
            psetGsfEleDEtaInSeedCut(wpEB,wpEE),           #2
            psetGsfEleDPhiInCut(wpEB,wpEE),               #3
            psetGsfEleFull5x5SigmaIEtaIEtaWithSatCut(wpEB,wpEE), #4
            psetGsfEleFull5x5E2x5OverE5x5WithSatCut(wpEB,wpEE),  #5
            psetGsfEleHadronicOverEMLinearCut(wpEB,wpEE), #6 
            psetGsfEleTrkPtIsoCut(wpEB,wpEE,useHEEPIso=True),#7
            psetGsfEleEmHadD1IsoRhoCut(wpEB,wpEE),        #8
            psetGsfEleDxyCut(wpEB,wpEE),                  #9
            psetGsfEleMissingHitsCut(wpEB,wpEE),          #10,
            psetGsfEleEcalDrivenCut(wpEB,wpEE)            #11
            )
        )
    return parameterSet
 

References psetGsfEleDEtaInSeedCut(), psetGsfEleDPhiInCut(), psetGsfEleDxyCut(), psetGsfEleEcalDrivenCut(), psetGsfEleEmHadD1IsoRhoCut(), psetGsfEleFull5x5E2x5OverE5x5WithSatCut(), psetGsfEleFull5x5SigmaIEtaIEtaWithSatCut(), psetGsfEleHadronicOverEMLinearCut(), psetGsfEleMissingHitsCut(), psetGsfEleSCEtaMultiRangeCut(), psetGsfEleTrkPtIsoCut(), and psetMinPtCut().

configureHEEPElectronID_V71()

def heepElectronID_tools.configureHEEPElectronID_V71	(		idName,
			wpEB,
			wpEE,
			minEt
	)

This function configures the full cms.PSet for a VID ID and returns it.
The inputs: two objects of the type HEEP_WorkingPoint_V1, one
containing the cuts for the Barrel (EB) and the other one for the Endcap (EE).

Definition at line 472 of file heepElectronID_tools.py.

def configureHEEPElectronID_V71(idName, wpEB, wpEE,minEt):
    """
    This function configures the full cms.PSet for a VID ID and returns it.
    The inputs: two objects of the type HEEP_WorkingPoint_V1, one
    containing the cuts for the Barrel (EB) and the other one for the Endcap (EE).
    """
    parameterSet = cms.PSet(
        idName = cms.string(idName),
        cutFlow = cms.VPSet(
            psetMinEcalEtCut(cutValue=minEt),             #0
            psetGsfEleSCEtaMultiRangeCut(),               #1
            psetGsfEleDEtaInSeedCut(wpEB,wpEE),           #2
            psetGsfEleDPhiInCut(wpEB,wpEE),               #3
            psetGsfEleFull5x5SigmaIEtaIEtaWithSatCut(wpEB,wpEE), #4
            psetGsfEleFull5x5E2x5OverE5x5WithSatCut(wpEB,wpEE),  #5
            psetGsfEleHadronicOverEMLinearCut(wpEB,wpEE), #6 
            psetGsfEleTrkPtIsoCut(wpEB,wpEE,useHEEPIso=True),#7
            psetGsfEleEmHadD1IsoRhoCut(wpEB,wpEE,energyType="Ecal"),  #8
            psetGsfEleDxyCut(wpEB,wpEE),                  #9
            psetGsfEleMissingHitsCut(wpEB,wpEE),          #10,
            psetGsfEleEcalDrivenCut(wpEB,wpEE)            #11
            )
        )
    return parameterSet
 
 

References psetGsfEleDEtaInSeedCut(), psetGsfEleDPhiInCut(), psetGsfEleDxyCut(), psetGsfEleEcalDrivenCut(), psetGsfEleEmHadD1IsoRhoCut(), psetGsfEleFull5x5E2x5OverE5x5WithSatCut(), psetGsfEleFull5x5SigmaIEtaIEtaWithSatCut(), psetGsfEleHadronicOverEMLinearCut(), psetGsfEleMissingHitsCut(), psetGsfEleSCEtaMultiRangeCut(), psetGsfEleTrkPtIsoCut(), and psetMinEcalEtCut().

psetGsfEleDEtaInSeedCut()

def heepElectronID_tools.psetGsfEleDEtaInSeedCut	(		wpEB,
			wpEE
	)

Definition at line 172 of file heepElectronID_tools.py.

def psetGsfEleDEtaInSeedCut(wpEB, wpEE):
    return cms.PSet( 
        cutName = cms.string('GsfEleDEtaInSeedCut'),
        dEtaInSeedCutValueEB = cms.double( wpEB.dEtaInSeedCut ),
        dEtaInSeedCutValueEE = cms.double( wpEE.dEtaInSeedCut ),
        barrelCutOff = cms.double(ebCutOff),
        needsAdditionalProducts = cms.bool(False),
        isIgnored = cms.bool(False)
        )
 
# Configure the cut on the dPhiIn

Referenced by configureHEEPElectronID_V51(), configureHEEPElectronID_V60(), configureHEEPElectronID_V60_80XAOD(), configureHEEPElectronID_V61(), configureHEEPElectronID_V70(), and configureHEEPElectronID_V71().

psetGsfEleDPhiInCut()

def heepElectronID_tools.psetGsfEleDPhiInCut	(		wpEB,
			wpEE
	)

Definition at line 183 of file heepElectronID_tools.py.

def psetGsfEleDPhiInCut(wpEB, wpEE):
    return cms.PSet( 
        cutName = cms.string('GsfEleDPhiInCut'),
        dPhiInCutValueEB = cms.double( wpEB.dPhiInCut ),
        dPhiInCutValueEE = cms.double( wpEE.dPhiInCut ),
        barrelCutOff = cms.double(ebCutOff),
        needsAdditionalProducts = cms.bool(False),
        isIgnored = cms.bool(False)
        )
 
# Confugure the full 5x5 sigmaIEtaIEta cut

Referenced by configureHEEPElectronID_V51(), configureHEEPElectronID_V60(), configureHEEPElectronID_V60_80XAOD(), configureHEEPElectronID_V61(), configureHEEPElectronID_V70(), and configureHEEPElectronID_V71().

psetGsfEleDxyCut()

def heepElectronID_tools.psetGsfEleDxyCut	(		wpEB,
			wpEE
	)

Definition at line 360 of file heepElectronID_tools.py.

def psetGsfEleDxyCut(wpEB, wpEE):
    return cms.PSet(
        cutName = cms.string('GsfEleDxyCut'),
        dxyCutValueEB = cms.double( wpEB.dxyCut ),
        dxyCutValueEE = cms.double( wpEE.dxyCut ),
        vertexSrc = cms.InputTag("offlinePrimaryVertices"),
        vertexSrcMiniAOD = cms.InputTag("offlineSlimmedPrimaryVertices"),
        barrelCutOff = cms.double(ebCutOff),
        needsAdditionalProducts = cms.bool(True),
        isIgnored = cms.bool(False)
        )
 
# Configure the cut on missing hits

Referenced by configureHEEPElectronID_V51(), configureHEEPElectronID_V60(), configureHEEPElectronID_V60_80XAOD(), configureHEEPElectronID_V61(), configureHEEPElectronID_V70(), and configureHEEPElectronID_V71().

psetGsfEleEcalDrivenCut()

def heepElectronID_tools.psetGsfEleEcalDrivenCut	(		wpEB,
			wpEE
	)

Definition at line 382 of file heepElectronID_tools.py.

def psetGsfEleEcalDrivenCut(wpEB, wpEE):
    return cms.PSet(
        cutName = cms.string('GsfEleEcalDrivenCut'),
        ecalDrivenEB = cms.int32( wpEB.ecalDrivenCut ),
        ecalDrivenEE = cms.int32( wpEE.ecalDrivenCut ),
        barrelCutOff = cms.double(ebCutOff),
        needsAdditionalProducts = cms.bool(False),
        isIgnored = cms.bool(False)
        ) 
 
# ==============================================================
# Define the complete cut sets
# ==============================================================
 

Referenced by configureHEEPElectronID_V51(), configureHEEPElectronID_V60(), configureHEEPElectronID_V60_80XAOD(), configureHEEPElectronID_V61(), configureHEEPElectronID_V70(), and configureHEEPElectronID_V71().

psetGsfEleEmHadD1IsoRhoCut()

def heepElectronID_tools.psetGsfEleEmHadD1IsoRhoCut	(		wpEB,
			wpEE,
			energyType = "EcalTrk"
	)

Definition at line 343 of file heepElectronID_tools.py.

def psetGsfEleEmHadD1IsoRhoCut(wpEB, wpEE,energyType="EcalTrk"):
    return cms.PSet(
        cutName = cms.string('GsfEleEmHadD1IsoRhoCut'),
        slopeTermEB = cms.double( wpEB.ehIsoSlopeTerm ),
        slopeTermEE = cms.double( wpEE.ehIsoSlopeTerm ),
        slopeStartEB = cms.double( wpEB.ehIsoSlopeStart ),
        slopeStartEE = cms.double( wpEE.ehIsoSlopeStart ),
        constTermEB = cms.double( wpEB.ehIsoConstTerm ),
        constTermEE = cms.double( wpEE.ehIsoConstTerm ),
        energyType = cms.string( energyType ),
        rhoConstant = cms.double( wpEB.effAreaForEHIso), # expected to be the same for EB and EE
        rho = cms.InputTag("fixedGridRhoFastjetAll"),
        needsAdditionalProducts = cms.bool(True),
        isIgnored = cms.bool(False)
        )
 
# Configure the dxy cut

Referenced by configureHEEPElectronID_V51(), configureHEEPElectronID_V60(), configureHEEPElectronID_V60_80XAOD(), configureHEEPElectronID_V61(), configureHEEPElectronID_V70(), and configureHEEPElectronID_V71().

psetGsfEleFull5x5E2x5OverE5x5Cut()

def heepElectronID_tools.psetGsfEleFull5x5E2x5OverE5x5Cut	(		wpEB,
			wpEE
	)

Definition at line 216 of file heepElectronID_tools.py.

def psetGsfEleFull5x5E2x5OverE5x5Cut(wpEB, wpEE):
    return cms.PSet( 
        cutName = cms.string('GsfEleFull5x5E2x5OverE5x5Cut'),
        # E1x5 / E5x5
        minE1x5OverE5x5EB = cms.double( wpEB.minE1x5OverE5x5Cut ),
        minE1x5OverE5x5EE = cms.double( wpEE.minE1x5OverE5x5Cut ),
        # E2x5 / E5x5
        minE2x5OverE5x5EB = cms.double( wpEB.minE2x5OverE5x5Cut ),
        minE2x5OverE5x5EE = cms.double( wpEE.minE2x5OverE5x5Cut ),
        needsAdditionalProducts = cms.bool(False),
        isIgnored = cms.bool(False)
        )
# Configure XxX shower shape cuts

Referenced by configureHEEPElectronID_V51(), configureHEEPElectronID_V60(), and configureHEEPElectronID_V61().

psetGsfEleFull5x5E2x5OverE5x5WithSatCut()

def heepElectronID_tools.psetGsfEleFull5x5E2x5OverE5x5WithSatCut	(		wpEB,
			wpEE
	)

Definition at line 229 of file heepElectronID_tools.py.

def psetGsfEleFull5x5E2x5OverE5x5WithSatCut(wpEB, wpEE):
    return cms.PSet( 
        cutName = cms.string('GsfEleFull5x5E2x5OverE5x5WithSatCut'),
        # E1x5 / E5x5
        minE1x5OverE5x5EB = cms.double( wpEB.minE1x5OverE5x5Cut ),
        minE1x5OverE5x5EE = cms.double( wpEE.minE1x5OverE5x5Cut ),
        # E2x5 / E5x5
        minE2x5OverE5x5EB = cms.double( wpEB.minE2x5OverE5x5Cut ),
        minE2x5OverE5x5EE = cms.double( wpEE.minE2x5OverE5x5Cut ),
        maxNrSatCrysIn5x5EB =cms.int32( 0 ),
        maxNrSatCrysIn5x5EE =cms.int32( 0 ),
        needsAdditionalProducts = cms.bool(False),
        isIgnored = cms.bool(False)
        )
# Configure the cut of E/H

Referenced by configureHEEPElectronID_V60_80XAOD(), configureHEEPElectronID_V70(), and configureHEEPElectronID_V71().

psetGsfEleFull5x5SigmaIEtaIEtaCut()

def heepElectronID_tools.psetGsfEleFull5x5SigmaIEtaIEtaCut	(		wpEB,
			wpEE
	)

Definition at line 194 of file heepElectronID_tools.py.

def psetGsfEleFull5x5SigmaIEtaIEtaCut(wpEB, wpEE):
    return cms.PSet( 
        cutName = cms.string('GsfEleEBEECut'),
        cutString = cms.string("full5x5_sigmaIetaIeta"),
        cutValueEB = cms.double( wpEB.full5x5SigmaIEtaIEtaCut ),
        cutValueEE = cms.double( wpEE.full5x5SigmaIEtaIEtaCut ),
        needsAdditionalProducts = cms.bool(False),
        isIgnored = cms.bool(False)
        )
 

Referenced by configureHEEPElectronID_V51(), configureHEEPElectronID_V60(), and configureHEEPElectronID_V61().

psetGsfEleFull5x5SigmaIEtaIEtaWithSatCut()

def heepElectronID_tools.psetGsfEleFull5x5SigmaIEtaIEtaWithSatCut	(		wpEB,
			wpEE
	)

Definition at line 204 of file heepElectronID_tools.py.

def psetGsfEleFull5x5SigmaIEtaIEtaWithSatCut(wpEB, wpEE):
    return cms.PSet( 
        cutName = cms.string('GsfEleFull5x5SigmaIEtaIEtaWithSatCut'),
        maxSigmaIEtaIEtaEB = cms.double( wpEB.full5x5SigmaIEtaIEtaCut ),
        maxSigmaIEtaIEtaEE = cms.double( wpEE.full5x5SigmaIEtaIEtaCut ),
        maxNrSatCrysIn5x5EB =cms.int32( 0 ),
        maxNrSatCrysIn5x5EE =cms.int32( 0 ),
        needsAdditionalProducts = cms.bool(False), 
        
        isIgnored = cms.bool(False)
        )
# Configure XxX shower shape cuts

Referenced by configureHEEPElectronID_V60_80XAOD(), configureHEEPElectronID_V70(), and configureHEEPElectronID_V71().

psetGsfEleHadronicOverEMLinearCut()

def heepElectronID_tools.psetGsfEleHadronicOverEMLinearCut	(		wpEB,
			wpEE
	)

Definition at line 244 of file heepElectronID_tools.py.

def psetGsfEleHadronicOverEMLinearCut(wpEB, wpEE) :
    return cms.PSet( 
        cutName = cms.string('GsfEleHadronicOverEMLinearCut'),
        # Three constants for the GsfEleHadronicOverEMLinearCut
        #     cut = constTerm if value < slopeStart
        #     cut = slopeTerm * (value - slopeStart) + constTerm if value >= slopeStart
        slopeTermEB = cms.double( wpEB.hOverESlopeTerm ),
        slopeTermEE = cms.double( wpEE.hOverESlopeTerm ),
        slopeStartEB = cms.double( wpEB.hOverESlopeStart ),
        slopeStartEE = cms.double( wpEE.hOverESlopeStart ),
        constTermEB = cms.double( wpEB.hOverEConstTerm ),
        constTermEE = cms.double( wpEE.hOverEConstTerm ),
        needsAdditionalProducts = cms.bool(False),
        isIgnored = cms.bool(False)
        )
 
# Configure the cut on the tracker isolation

Referenced by configureHEEPElectronID_V51(), configureHEEPElectronID_V60(), configureHEEPElectronID_V60_80XAOD(), configureHEEPElectronID_V61(), configureHEEPElectronID_V70(), and configureHEEPElectronID_V71().

psetGsfEleMissingHitsCut()

def heepElectronID_tools.psetGsfEleMissingHitsCut	(		wpEB,
			wpEE
	)

Definition at line 373 of file heepElectronID_tools.py.

def psetGsfEleMissingHitsCut(wpEB, wpEE):
    return cms.PSet( 
        cutName = cms.string('GsfEleMissingHitsCut'),
        maxMissingHitsEB = cms.uint32( wpEB.maxMissingHitsCut ),
        maxMissingHitsEE = cms.uint32( wpEE.maxMissingHitsCut ),
        barrelCutOff = cms.double(ebCutOff),
        needsAdditionalProducts = cms.bool(False),
        isIgnored = cms.bool(False)
        )

Referenced by configureHEEPElectronID_V51(), configureHEEPElectronID_V60(), configureHEEPElectronID_V60_80XAOD(), configureHEEPElectronID_V61(), configureHEEPElectronID_V70(), and configureHEEPElectronID_V71().

psetGsfEleSCEtaMultiRangeCut()

def heepElectronID_tools.psetGsfEleSCEtaMultiRangeCut

(

)

Definition at line 157 of file heepElectronID_tools.py.

def psetGsfEleSCEtaMultiRangeCut():
    return cms.PSet( 
        cutName = cms.string("GsfEleSCEtaMultiRangeCut"),
        useAbsEta = cms.bool(True),
        allowedEtaRanges = cms.VPSet( 
            cms.PSet( minEta = cms.double(0.0), 
                      maxEta = cms.double(ebMax) ),
            cms.PSet( minEta = cms.double(eeMin), 
                      maxEta = cms.double(2.5) )
            ),
        needsAdditionalProducts = cms.bool(False),
        isIgnored = cms.bool(False)
        )
 
# Configure the cut on the dEtaIn for the seed

Referenced by configureHEEPElectronID_V51(), configureHEEPElectronID_V60(), configureHEEPElectronID_V60_80XAOD(), configureHEEPElectronID_V61(), configureHEEPElectronID_V70(), and configureHEEPElectronID_V71().

psetGsfEleTrkPtFall16IsoCut()

def heepElectronID_tools.psetGsfEleTrkPtFall16IsoCut	(		wpEB,
			wpEE
	)

Definition at line 320 of file heepElectronID_tools.py.

def psetGsfEleTrkPtFall16IsoCut(wpEB, wpEE):
    return cms.PSet( 
        cutName = cms.string('GsfEleValueMapIsoRhoCut'),
        # Three constants for the GsfEleTrkPtIsoCut
        #     cut = constTerm if value < slopeStart
        #     cut = slopeTerm * (value - slopeStart) + constTerm if value >= slopeStart
        slopeTermEB = cms.double( wpEB.trkIsoSlopeTerm ),
        slopeTermEE = cms.double( wpEE.trkIsoSlopeTerm ),
        slopeStartEB = cms.double( wpEB.trkIsoSlopeStart ),
        slopeStartEE = cms.double( wpEE.trkIsoSlopeStart ),
        constTermEB = cms.double( wpEB.trkIsoConstTerm ),
        constTermEE = cms.double( wpEE.trkIsoConstTerm ),
        #no rho so we zero it out, if the input tag is empty, its ignored anyways
        rhoEtStartEB = cms.double( 999999.),
        rhoEtStartEE = cms.double( 999999.),
        rhoEAEB = cms.double( 0. ),
        rhoEAEE = cms.double( 0. ),
        rho = cms.InputTag(""),
        value = cms.InputTag("heepIDVarValueMaps","eleTrkPtIso"),
        needsAdditionalProducts = cms.bool(True),
        isIgnored = cms.bool(False)
        )
# Configure the cut on the EM + Had_depth_1 isolation with rho correction

psetGsfEleTrkPtIsoCut()

def heepElectronID_tools.psetGsfEleTrkPtIsoCut	(		wpEB,
			wpEE,
			useHEEPIso = False
	)

Definition at line 261 of file heepElectronID_tools.py.

def psetGsfEleTrkPtIsoCut(wpEB, wpEE, useHEEPIso = False):
    return cms.PSet( 
        cutName = cms.string('GsfEleTrkPtIsoCut'),
        # Three constants for the GsfEleTrkPtIsoCut
        #     cut = constTerm if value < slopeStart
        #     cut = slopeTerm * (value - slopeStart) + constTerm if value >= slopeStart
        slopeTermEB = cms.double( wpEB.trkIsoSlopeTerm ),
        slopeTermEE = cms.double( wpEE.trkIsoSlopeTerm ),
        slopeStartEB = cms.double( wpEB.trkIsoSlopeStart ),
        slopeStartEE = cms.double( wpEE.trkIsoSlopeStart ),
        constTermEB = cms.double( wpEB.trkIsoConstTerm ),
        constTermEE = cms.double( wpEE.trkIsoConstTerm ),
        useHEEPIso = cms.bool(useHEEPIso),
        needsAdditionalProducts = cms.bool(False),
        isIgnored = cms.bool(False)
        )
# Configure the cut on the tracker isolation with a rho correction (hack for 76X)

Referenced by configureHEEPElectronID_V51(), configureHEEPElectronID_V60(), configureHEEPElectronID_V70(), and configureHEEPElectronID_V71().

psetGsfEleTrkPtIsoRhoCut()

def heepElectronID_tools.psetGsfEleTrkPtIsoRhoCut	(		wpEB,
			wpEE
	)

Definition at line 278 of file heepElectronID_tools.py.

def psetGsfEleTrkPtIsoRhoCut(wpEB, wpEE):
    return cms.PSet( 
        cutName = cms.string('GsfEleTrkPtIsoRhoCut'),
        # Three constants for the GsfEleTrkPtIsoCut
        #     cut = constTerm if value < slopeStart
        #     cut = slopeTerm * (value - slopeStart) + constTerm if value >= slopeStart
        slopeTermEB = cms.double( wpEB.trkIsoSlopeTerm ),
        slopeTermEE = cms.double( wpEE.trkIsoSlopeTerm ),
        slopeStartEB = cms.double( wpEB.trkIsoSlopeStart ),
        slopeStartEE = cms.double( wpEE.trkIsoSlopeStart ),
        constTermEB = cms.double( wpEB.trkIsoConstTerm ),
        constTermEE = cms.double( wpEE.trkIsoConstTerm ),
        rhoEtStartEB = cms.double( wpEB.trkIsoRhoCorrStart),
        rhoEtStartEE = cms.double( wpEE.trkIsoRhoCorrStart),
        rhoEAEB = cms.double( wpEB.trkIsoEffArea),
        rhoEAEE = cms.double( wpEE.trkIsoEffArea),
        rho = cms.InputTag("fixedGridRhoFastjetAll"),
        needsAdditionalProducts = cms.bool(True),
        isIgnored = cms.bool(False)
        )

Referenced by configureHEEPElectronID_V61().

psetGsfEleTrkPtNoJetCoreIsoCut()

def heepElectronID_tools.psetGsfEleTrkPtNoJetCoreIsoCut	(		wpEB,
			wpEE
	)

Definition at line 298 of file heepElectronID_tools.py.

def psetGsfEleTrkPtNoJetCoreIsoCut(wpEB, wpEE):
    return cms.PSet( 
        cutName = cms.string('GsfEleValueMapIsoRhoCut'),
        # Three constants for the GsfEleTrkPtIsoCut
        #     cut = constTerm if value < slopeStart
        #     cut = slopeTerm * (value - slopeStart) + constTerm if value >= slopeStart
        slopeTermEB = cms.double( wpEB.trkIsoSlopeTerm ),
        slopeTermEE = cms.double( wpEE.trkIsoSlopeTerm ),
        slopeStartEB = cms.double( wpEB.trkIsoSlopeStart ),
        slopeStartEE = cms.double( wpEE.trkIsoSlopeStart ),
        constTermEB = cms.double( wpEB.trkIsoConstTerm ),
        constTermEE = cms.double( wpEE.trkIsoConstTerm ),
        #no rho so we zero it out, if the input tag is empty, its ignored anyways
        rhoEtStartEB = cms.double( 999999.),
        rhoEtStartEE = cms.double( 999999.),
        rhoEAEB = cms.double( 0. ),
        rhoEAEE = cms.double( 0. ),
        rho = cms.InputTag(""),
        value = cms.InputTag("heepIDVarValueMaps","eleTrkPtIsoNoJetCore"),
        needsAdditionalProducts = cms.bool(True),
        isIgnored = cms.bool(False)
        )

Referenced by configureHEEPElectronID_V60_80XAOD().

psetMinEcalEtCut()

def heepElectronID_tools.psetMinEcalEtCut

(

cutValue = 5.

)

Definition at line 148 of file heepElectronID_tools.py.

def psetMinEcalEtCut(cutValue=5.):
    return cms.PSet( 
        cutName = cms.string("GsfEleMinEcalEtCut"),
        minEt = cms.double(cutValue),
        needsAdditionalProducts = cms.bool(False),
        isIgnored = cms.bool(False) 
        )
                
# Take all particles in the eta ranges 0-ebMax and eeMin-2.5

Referenced by configureHEEPElectronID_V71().

psetMinPtCut()

def heepElectronID_tools.psetMinPtCut

(

cutValue = 35.

)

Definition at line 139 of file heepElectronID_tools.py.

def psetMinPtCut(cutValue=35.):
    return cms.PSet( 
        cutName = cms.string("MinPtCut"),
        minPt = cms.double(cutValue),
        needsAdditionalProducts = cms.bool(False),
        isIgnored = cms.bool(False) 
        )
 
# The mininum pt cut is set to 5 GeV

Referenced by configureHEEPElectronID_V51(), configureHEEPElectronID_V60(), configureHEEPElectronID_V60_80XAOD(), configureHEEPElectronID_V61(), and configureHEEPElectronID_V70().

Variable Documentation

ebCutOff

heepElectronID_tools.ebCutOff

Definition at line 6 of file heepElectronID_tools.py.

ebMax

heepElectronID_tools.ebMax

Definition at line 4 of file heepElectronID_tools.py.

eeMin

heepElectronID_tools.eeMin

Definition at line 5 of file heepElectronID_tools.py.