FineDelayHistosUsingDb.cc

Go to the documentation of this file.

 
#include "Geometry/TrackerGeometryBuilder/interface/TrackerGeometry.h"
#include "Geometry/Records/interface/TrackerDigiGeometryRecord.h"
#include "DQM/SiStripCommissioningDbClients/interface/FineDelayHistosUsingDb.h"
#include "DataFormats/SiStripCommon/interface/SiStripConstants.h"
#include "DataFormats/SiStripCommon/interface/SiStripFecKey.h"
#include "DataFormats/SiStripCommon/interface/SiStripFedKey.h"
#include "FWCore/Framework/interface/ESHandle.h"
#include "DataFormats/GeometryVector/interface/GlobalPoint.h"
#include "Geometry/CommonDetUnit/interface/GeomDetType.h"
#include "Geometry/CommonDetUnit/interface/GeomDet.h"
#include <Geometry/CommonTopologies/interface/Topology.h>
#include <CondFormats/DataRecord/interface/SiStripFedCablingRcd.h>
#include <CondFormats/SiStripObjects/interface/SiStripFedCabling.h>
#include <CondFormats/SiStripObjects/interface/FedChannelConnection.h>
#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include <iostream>
 
using namespace sistrip;
 
// -----------------------------------------------------------------------------
FineDelayHistosUsingDb::FineDelayHistosUsingDb(const edm::ParameterSet& pset, DQMStore* bei, SiStripConfigDb* const db)
    : CommissioningHistograms(pset.getParameter<edm::ParameterSet>("FineDelayParameters"), bei, sistrip::FINE_DELAY),
      CommissioningHistosUsingDb(db, sistrip::FINE_DELAY),
      SamplingHistograms(pset.getParameter<edm::ParameterSet>("FineDelayParameters"), bei, sistrip::FINE_DELAY),
      tracker_(nullptr) {
  LogTrace(mlDqmClient_) << "[FineDelayHistosUsingDb::" << __func__ << "]"
                         << " Constructing object...";
  delays_.clear();
}
 
// -----------------------------------------------------------------------------
FineDelayHistosUsingDb::~FineDelayHistosUsingDb() {
  LogTrace(mlDqmClient_) << "[FineDelayHistosUsingDb::" << __func__ << "]"
                         << " Destructing object...";
}
 
// -----------------------------------------------------------------------------
void FineDelayHistosUsingDb::configure(const edm::ParameterSet& pset, const edm::EventSetup& setup) {
  CommissioningHistosUsingDb::configure(pset, setup);
  // get geometry
  edm::ESHandle<TrackerGeometry> estracker;
  setup.get<TrackerDigiGeometryRecord>().get(estracker);
  tracker_ = &(*estracker);
  SamplingHistograms::configure(pset, setup);
  cosmic_ = this->pset().getParameter<bool>("cosmic");
}
 
// -----------------------------------------------------------------------------
void FineDelayHistosUsingDb::uploadConfigurations() {
  if (!db()) {
    edm::LogWarning(mlDqmClient_) << "[FineDelayHistosUsingDb::" << __func__ << "]"
                                  << " NULL pointer to SiStripConfigDb interface!"
                                  << " Aborting upload...";
    return;
  }
 
  // Retrieve and update PLL device descriptions
  db()->clearDeviceDescriptions();
  SiStripConfigDb::DeviceDescriptionsRange devices = db()->getDeviceDescriptions(PLL);
  bool upload = update(devices);
 
  // Check if new PLL settings are valid
  if (!upload) {
    edm::LogWarning(mlDqmClient_) << "[FineDelayHistosUsingDb::" << __func__ << "]"
                                  << " Found invalid PLL settings (coarse > 15)"
                                  << " Aborting update to database...";
    return;
  }
 
  // Upload PLL device descriptions
  if (doUploadConf()) {
    LogTrace(mlDqmClient_) << "[FineDelayHistosUsingDb::" << __func__ << "]"
                           << " Uploading PLL settings to DB...";
    db()->uploadDeviceDescriptions();
    LogTrace(mlDqmClient_) << "[FineDelayHistosUsingDb::" << __func__ << "]"
                           << " Upload of PLL settings to DB finished!";
  } else {
    edm::LogWarning(mlDqmClient_) << "[FineDelayHistosUsingDb::" << __func__ << "]"
                                  << " TEST only! No PLL settings will be uploaded to DB...";
  }
 
  // Update FED descriptions with new ticker thresholds
  db()->clearFedDescriptions();
  SiStripConfigDb::FedDescriptionsRange feds = db()->getFedDescriptions();
  update(feds);
 
  // Update FED descriptions with new ticker thresholds
  if (doUploadConf()) {
    LogTrace(mlDqmClient_) << "[FineDelayHistosUsingDb::" << __func__ << "]"
                           << " Uploading FED ticker thresholds to DB...";
    db()->uploadFedDescriptions();
    LogTrace(mlDqmClient_) << "[FineDelayHistosUsingDb::" << __func__ << "]"
                           << " Upload of FED ticker thresholds to DB finished!";
  } else {
    edm::LogWarning(mlDqmClient_) << "[FineDelayHistosUsingDb::" << __func__ << "]"
                                  << " TEST only! No FED ticker thresholds will be uploaded to DB...";
  }
}
 
void FineDelayHistosUsingDb::computeDelays() {
  // do nothing if delays_ map is already filled
  if (!delays_.empty())
    return;
 
  // the point from which track should originate
  float x = 0.;
  float y = 0.;
  float z = 0.;
  if (cosmic_) {
    y = 385.;
    z = 20.;
  }  // mean entry point of cosmics
  GlobalPoint referenceP_ = GlobalPoint(x, y, z);
  const double c = 30;  // cm/ns
 
  // the reference parameters (best delay in ns, initial Latency)
  float bestDelay_ = 0.;
  if (!data().empty()) {
    Analyses::const_iterator iter = data().begin();
    bestDelay_ = dynamic_cast<SamplingAnalysis*>(iter->second)->maximum();
  }
 
  // Retrieve FED ids from cabling
  auto ids = cabling()->fedIds();
 
  // loop over the FED ids
  for (auto ifed = ids.begin(); ifed != ids.end(); ++ifed) {
    auto conns = cabling()->fedConnections(*ifed);
    // loop over the connections for that FED
    for (auto iconn = conns.begin(); iconn != conns.end(); ++iconn) {
      // check that this is a tracker module
      if (DetId(iconn->detId()).det() != DetId::Tracker)
        continue;
      // retrieve the position of that module in the tracker using the geometry
      // and use it to compute the distance to the reference point set in the configuration
      if (tracker_) {
        float dist = tracker_->idToDetUnit(DetId(iconn->detId()))->toLocal(referenceP_).mag();
        float tof = dist / c;
        // compute the PLL delay shift for the module as delay + tof
        float delay = bestDelay_ + tof;
        // store that in the map
        delays_[SiStripFecKey(
                    iconn->fecCrate(), iconn->fecSlot(), iconn->fecRing(), iconn->ccuAddr(), iconn->ccuChan(), 0)
                    .key()] = delay;
        edm::LogVerbatim(mlDqmClient_) << "[FineDelayHistosUsingDb::" << __func__
                                       << "] Computed Delay to be added to PLL: " << bestDelay_ << " " << tof << " "
                                       << delay << std::endl;
      } else {
        edm::LogError(mlDqmClient_) << "[FineDelayHistosUsingDb::" << __func__ << "]"
                                    << " Tracker geometry not initialized. Impossible to compute the delays.";
      }
    }
  }
}
 
// -----------------------------------------------------------------------------
bool FineDelayHistosUsingDb::update(SiStripConfigDb::DeviceDescriptionsRange devices) {
  // do the core computation of delays per FED connection
  computeDelays();
 
  // Iterate through devices and update device descriptions
  uint16_t updated = 0;
  std::vector<SiStripFecKey> invalid;
  SiStripConfigDb::DeviceDescriptionsV::const_iterator idevice;
  for (idevice = devices.begin(); idevice != devices.end(); idevice++) {
    // Check device type
    if ((*idevice)->getDeviceType() != PLL) {
      continue;
    }
 
    // Cast to retrieve appropriate description object
    pllDescription* desc = dynamic_cast<pllDescription*>(*idevice);
    if (!desc) {
      continue;
    }
 
    // Retrieve device addresses from device description
    const SiStripConfigDb::DeviceAddress& addr = db()->deviceAddress(*desc);
 
    // Construct key from device description
    uint32_t fec_key =
        SiStripFecKey(addr.fecCrate_, addr.fecSlot_, addr.fecRing_, addr.ccuAddr_, addr.ccuChan_, 0).key();
    SiStripFecKey fec_path = SiStripFecKey(fec_key);
 
    // extract the delay from the map
    float delay = desc->getDelayCoarse() * 25 + desc->getDelayFine() * 25. / 24. + delays_[fec_key];
    int delayCoarse = int(delay / 25);
    int delayFine = int(round((delay - 25 * delayCoarse) * 24. / 25.));
    if (delayFine == 24) {
      delayFine = 0;
      ++delayCoarse;
    }
    //  maximum coarse setting
    if (delayCoarse > 15) {
      invalid.push_back(fec_key);
      delayCoarse = sistrip::invalid_;
    }
 
    // Update PLL settings
    if (delayCoarse != sistrip::invalid_ && delayFine != sistrip::invalid_) {
      std::stringstream ss;
      ss << "[FineDelayHistosUsingDb::" << __func__ << "]"
         << " Updating coarse/fine PLL settings"
         << " for Crate/FEC/slot/ring/CCU " << fec_path.fecCrate() << "/" << fec_path.fecSlot() << "/"
         << fec_path.fecRing() << "/" << fec_path.ccuAddr() << "/" << fec_path.ccuChan() << " from "
         << static_cast<uint16_t>(desc->getDelayCoarse()) << "/" << static_cast<uint16_t>(desc->getDelayFine());
      desc->setDelayCoarse(delayCoarse);
      desc->setDelayFine(delayFine);
      updated++;
      ss << " to " << static_cast<uint16_t>(desc->getDelayCoarse()) << "/"
         << static_cast<uint16_t>(desc->getDelayFine());
      LogTrace(mlDqmClient_) << ss.str();
 
    } else {
      LogTrace(mlDqmClient_) << "[FineDelayHistosUsingDb::" << __func__ << "]"
                             << " Unexpected PLL delay settings for Crate/FEC/slot/ring/CCU " << fec_path.fecCrate()
                             << "/" << fec_path.fecSlot() << "/" << fec_path.fecRing() << "/" << fec_path.ccuAddr()
                             << "/" << fec_path.ccuChan();
    }
  }
 
  // Check if invalid settings were found
  if (!invalid.empty()) {
    std::stringstream ss;
    ss << "[FineDelayHistosUsingDb::" << __func__ << "]"
       << " Found PLL coarse setting of 15"
       << " (not allowed!) for following channels"
       << " (Crate/FEC/slot/ring/CCU/LLD): ";
    std::vector<SiStripFecKey>::iterator ikey = invalid.begin();
    std::vector<SiStripFecKey>::iterator jkey = invalid.end();
    for (; ikey != jkey; ++ikey) {
      ss << ikey->fecCrate() << "/" << ikey->fecSlot() << "/" << ikey->fecRing() << "/" << ikey->ccuAddr() << "/"
         << ikey->ccuChan() << ", ";
    }
    edm::LogWarning(mlDqmClient_) << ss.str();
    return false;
  }
 
  edm::LogVerbatim(mlDqmClient_) << "[FineDelayHistosUsingDb::" << __func__ << "]"
                                 << " Updated PLL settings for " << updated << " modules";
  return true;
}
 
// -----------------------------------------------------------------------------
void FineDelayHistosUsingDb::update(SiStripConfigDb::FedDescriptionsRange feds) {
  // do the core computation of delays per FED connection
  computeDelays();
 
  // Retrieve FED ids from cabling
  auto ids = cabling()->fedIds();
 
  // loop over the FED ids
  for (SiStripConfigDb::FedDescriptionsV::const_iterator ifed = feds.begin(); ifed != feds.end(); ifed++) {
    // If FED id not found in list (from cabling), then continue
    if (find(ids.begin(), ids.end(), (*ifed)->getFedId()) == ids.end()) {
      continue;
    }
    auto conns = cabling()->fedConnections((*ifed)->getFedId());
    // loop over the connections for that FED
    for (auto iconn = conns.begin(); iconn != conns.end(); iconn++) {
      // check that this is a tracker module
      if (DetId(iconn->detId()).det() != DetId::Tracker)
        continue;
      // build the Fed9UAddress for that channel. Used to update the description.
      Fed9U::Fed9UAddress fedChannel = Fed9U::Fed9UAddress(iconn->fedCh());
      // retreive the current value for the delays
      int fedDelayCoarse = (*ifed)->getCoarseDelay(fedChannel);
      int fedDelayFine = (*ifed)->getFineDelay(fedChannel);
      int fedDelay = int(fedDelayCoarse * 25. - fedDelayFine * 24. / 25.);
      // extract the delay from the map
      int delay = int(round(
          delays_[SiStripFecKey(
                      iconn->fecCrate(), iconn->fecSlot(), iconn->fecRing(), iconn->ccuAddr(), iconn->ccuChan(), 0)
                      .key()]));
      // compute the FED delay
      // this is done by substracting the best (PLL) delay to the present value (from the db)
      fedDelay -= delay;
      fedDelayCoarse = (fedDelay / 25) + 1;
      fedDelayFine = fedDelayCoarse * 25 - fedDelay;
      if (fedDelayFine == 25) {
        fedDelayFine = 0;
        --fedDelayCoarse;
      }
      // update the FED delay
      std::stringstream ss;
      ss << "[FineDelayHistosUsingDb::" << __func__ << "]"
         << " Updating the FED delay"
         << " for loop FED id/ch " << (*ifed)->getFedId() << "/" << iconn->fedCh() << " from "
         << (*ifed)->getCoarseDelay(fedChannel) << "/" << (*ifed)->getFineDelay(fedChannel) << " to ";
      (*ifed)->setDelay(fedChannel, fedDelayCoarse, fedDelayFine);
      ss << (*ifed)->getCoarseDelay(fedChannel) << "/" << (*ifed)->getFineDelay(fedChannel) << std::endl;
      LogTrace(mlDqmClient_) << ss.str();
    }
  }
 
  edm::LogVerbatim(mlDqmClient_) << "[FineDelayHistosUsingDb::" << __func__ << "]"
                                 << " Updated FED delay for " << ids.size() << " FEDs!";
}
 
// -----------------------------------------------------------------------------
void FineDelayHistosUsingDb::create(SiStripConfigDb::AnalysisDescriptionsV& desc, Analysis analysis) {
  SamplingAnalysis* anal = dynamic_cast<SamplingAnalysis*>(analysis->second);
  if (!anal) {
    return;
  }
 
  SiStripFecKey fec_key(anal->fecKey());  //@@ analysis->first
  SiStripFedKey fed_key(anal->fedKey());
 
  FineDelayAnalysisDescription* tmp;
  tmp = new FineDelayAnalysisDescription(anal->maximum(),
                                         anal->error(),
                                         0,
                                         0,
                                         0,
                                         0,
                                         0,
                                         0,
                                         db()->dbParams().partitions().begin()->second.partitionName(),
                                         db()->dbParams().partitions().begin()->second.runNumber(),
                                         anal->isValid(),
                                         "",
                                         fed_key.fedId(),
                                         fed_key.feUnit(),
                                         fed_key.feChan(),
                                         fed_key.fedApv());
 
  // Add comments
  typedef std::vector<std::string> Strings;
  Strings errors = anal->getErrorCodes();
  Strings::const_iterator istr = errors.begin();
  Strings::const_iterator jstr = errors.end();
  for (; istr != jstr; ++istr) {
    tmp->addComments(*istr);
  }
 
  // Store description
  desc.push_back(tmp);
}