Inheritance diagram for DDEcalBarrelAlgo:

Public Types
typedef HepGeom::Point3D< double >	Pt3D

typedef HepGeom::ReflectZ3D	RfZ3D

typedef HepGeom::Rotate3D	Ro3D

typedef CLHEP::HepRotation	Rota

typedef HepGeom::RotateX3D	RoX3D

typedef HepGeom::RotateY3D	RoY3D

typedef HepGeom::RotateZ3D	RoZ3D

typedef HepGeom::Transform3D	Tf3D

typedef HepGeom::Translate3D	Tl3D

typedef EcalTrapezoidParameters	Trap

typedef CLHEP::Hep3Vector	Vec3

Public Member Functions
double	apdHere () const

DDMaterial	apdMat () const

DDName	apdName () const

double	apdSide () const

double	apdThick () const

double	apdX1 () const

double	apdX2 () const

double	apdZ () const

double	backBracketHeight () const

DDMaterial	backBracketMat () const

const std::string &	backBracketName () const

double	backCBStdSep () const

double	backCoolBarHeight () const

double	backCoolBarHere () const

DDMaterial	backCoolBarMat () const

DDName	backCoolBarName () const

DDMaterial	backCoolBarSSMat () const

DDName	backCoolBarSSName () const

double	backCoolBarSSThick () const

double	backCoolBarThick () const

DDMaterial	backCoolBarWaMat () const

DDName	backCoolBarWaName () const

double	backCoolBarWaThick () const

double	backCoolBarWidth () const

double	backCoolHere () const

DDMaterial	backCoolMat () const

double	backCoolTankHere () const

DDMaterial	backCoolTankMat () const

const std::string &	backCoolTankName () const

double	backCoolTankThick () const

DDMaterial	backCoolTankWaMat () const

const std::string &	backCoolTankWaName () const

double	backCoolTankWaWidth () const

double	backCoolTankWidth () const

double	backCoolVFEHere () const

DDMaterial	backCoolVFEMat () const

DDName	backCoolVFEName () const

double	backHere () const

double	backMiscHere () const

double	backPipeHere () const

DDMaterial	backPipeMat () const

const std::string &	backPipeName () const

DDMaterial	backPipeWaterMat () const

DDMaterial	backPlate2Mat () const

DDName	backPlate2Name () const

double	backPlate2Thick () const

double	backPlateHere () const

double	backPlateLength () const

DDMaterial	backPlateMat () const

DDName	backPlateName () const

double	backPlateThick () const

double	backPlateWidth () const

double	backSideAngle () const

double	backSideHeight () const

double	backSideHere () const

double	backSideLength () const

DDMaterial	backSideMat () const

DDName	backSideName () const

double	backSideWidth () const

double	backSideYOff1 () const

double	backSideYOff2 () const

DDMaterial	backVFEMat () const

DDName	backVFEName () const

double	backXOff () const

double	backYOff () const

double	barHere () const

DDMaterial	barMat () const

DDName	barName () const

double	barPhiHi () const

double	barPhiLo () const

double	clrFrAlv () const

DDMaterial	clrMat () const

const std::string &	clrName () const

double	clrReAlv () const

double	clrThAlv () const

DDMaterial	cryMat () const

const std::string &	cryName () const

	DDEcalBarrelAlgo ()

DDMaterial	ddmat (const std::string &s) const

DDName	ddname (const std::string &s) const

double	dryAirTubeHere () const

double	dryAirTubeInnDiam () const

DDMaterial	dryAirTubeMat () const

const std::string &	dryAirTubeName () const

double	dryAirTubeOutDiam () const

void	execute (DDCompactView &cpv) override

double	fawDelPhi () const

double	fawHere () const

DDName	fawName () const

double	fawPhiOff () const

double	fawPhiRot () const

double	fawRadOff () const

double	grEdgeSlotHeight () const

double	grEdgeSlotHere () const

DDMaterial	grEdgeSlotMat () const

DDName	grEdgeSlotName () const

double	grEdgeSlotWidth () const

double	gridHere () const

DDMaterial	gridMat () const

DDName	gridName () const

double	gridThick () const

double	grilleHere () const

DDMaterial	grilleMat () const

const std::string &	grilleName () const

double	grilleThick () const

double	grilleWidth () const

double	grilleZSpace () const

double	grMidSlotHere () const

DDMaterial	grMidSlotMat () const

const std::string &	grMidSlotName () const

double	grMidSlotWidth () const

double	grMidSlotXOff () const

double	hawRCutDelY () const

double	hawRCutY () const

double	hawRCutZ () const

double	hawRHBIG () const

double	hawRhsml () const

DDName	hawRName () const

double	hawYOffCry () const

const std::string &	idNameSpace () const

double	ilyBndlLength () const

DDMaterial	ilyBndlMat () const

DDName	ilyBndlName () const

double	ilyBndlOff () const

double	ilyDelPhi () const

double	ilyDiffLength () const

DDMaterial	ilyDiffMat () const

DDName	ilyDiffName () const

double	ilyDiffOff () const

double	ilyFanOutHeight () const

double	ilyFanOutHere () const

double	ilyFanOutLength () const

DDMaterial	ilyFanOutMat () const

DDName	ilyFanOutName () const

double	ilyFanOutWidth () const

double	ilyFEMHeight () const

double	ilyFEMLength () const

DDMaterial	ilyFEMMat () const

DDName	ilyFEMName () const

double	ilyFEMWidth () const

double	ilyHere () const

const std::string &	ilyName () const

double	ilyPhiLow () const

double	ilyPipeHere () const

double	ilyPipeID () const

DDMaterial	ilyPipeMat () const

const std::string &	ilyPipeName () const

double	ilyPipeOD () const

double	ilyPTMHeight () const

double	ilyPTMHere () const

double	ilyPTMLength () const

DDMaterial	ilyPTMMat () const

DDName	ilyPTMName () const

double	ilyPTMWidth () const

void	initialize (const DDNumericArguments &nArgs, const DDVectorArguments &vArgs, const DDMapArguments &mArgs, const DDStringArguments &sArgs, const DDStringVectorArguments &vsArgs) override

double	mBCoolTubeHere () const

double	mBCoolTubeInnDiam () const

DDMaterial	mBCoolTubeMat () const

const std::string &	mBCoolTubeName () const

double	mBCoolTubeNum () const

double	mBCoolTubeOutDiam () const

double	mBLyrHere () const

double	mBManifHere () const

double	mBManifInnDiam () const

DDMaterial	mBManifMat () const

DDName	mBManifName () const

double	mBManifOutDiam () const

DDRotation	myrot (const std::string &s, const CLHEP::HepRotation &r) const
	Create a DDRotation from a string converted to DDName and CLHEP::HepRotation converted to DDRotationMatrix. – Michael Case. More...

DDSolid	mytrap (const std::string &s, const Trap &t) const

unsigned int	nCryPerAlvEta () const

unsigned int	nCryTypes () const

unsigned int	nFawPerSupm () const

double	nomCryDimAF () const

double	nomCryDimLZ () const

double	patchPanelHere () const

DDName	patchPanelName () const

double	pincerBlkLength () const

DDMaterial	pincerBlkMat () const

DDName	pincerBlkName () const

double	pincerCutHeight () const

DDMaterial	pincerCutMat () const

DDName	pincerCutName () const

double	pincerCutWidth () const

double	pincerEnvHeight () const

double	pincerEnvLength () const

DDMaterial	pincerEnvMat () const

DDName	pincerEnvName () const

double	pincerEnvWidth () const

double	pincerRodHere () const

DDMaterial	pincerRodMat () const

DDName	pincerRodName () const

DDName	pincerShim1Name () const

double	pincerShim1Width () const

DDName	pincerShim2Name () const

double	pincerShim2Width () const

double	pincerShimHeight () const

DDMaterial	pincerShimMat () const

DDName	spmCutName () const

double	spmCutRM () const

double	spmCutRP () const

int	spmCutShow () const

double	spmCutThick () const

double	spmDelPhi () const

double	spmExpThick () const

double	spmExpWide () const

double	spmExpYOff () const

double	spmLowPhi () const

DDMaterial	spmMat () const

DDName	spmName () const

unsigned int	spmNPerHalf () const

double	spmPhiOff () const

double	spmSideHigh () const

DDMaterial	spmSideMat () const

DDName	spmSideName () const

double	spmSideThick () const

double	spmSideYOffM () const

double	spmSideYOffP () const

double	underAF () const

double	underAR () const

double	underBF () const

double	underBR () const

double	underCF () const

double	underCR () const

double	underLZ () const

const std::vector< std::string > &	vecBackCoolName () const

const std::vector< double > &	vecBackCoolNPerSec () const

const std::vector< double > &	vecBackCoolNSec () const

const std::vector< double > &	vecBackCoolSecSep () const

const std::vector< std::string > &	vecBackMiscMat () const

const std::vector< std::string > &	vecBackMiscName () const

const std::vector< double > &	vecBackMiscThick () const

const std::vector< double > &	vecBackPipeDiam () const

const std::vector< double > &	vecBackPipeThick () const

const std::vector< std::string > &	vecBackVFELyrMat () const

const std::vector< std::string > &	vecBackVFELyrName () const

const std::vector< double > &	vecBackVFELyrThick () const

const std::vector< double > &	vecBarRMax () const

const std::vector< double > &	vecBarRMin () const

const std::vector< double > &	vecBarRota () const

const std::vector< double > &	vecBarRota2 () const

const std::vector< double > &	vecBarRota3 () const

const std::vector< double > &	vecBarTran () const

const std::vector< double > &	vecBarZPts () const

const std::vector< double > &	vecGapAlvEta () const

const std::vector< double > &	vecGrilleHeight () const

const std::vector< double > &	vecGrilleZOff () const

const std::vector< double > &	vecGrMidSlotHeight () const

const std::vector< double > &	vecIlyFanOutPhi () const

const std::vector< double > &	vecIlyFanOutZ () const

const std::vector< double > &	vecIlyFEMPhi () const

const std::vector< double > &	vecIlyFEMZ () const

const std::vector< std::string > &	vecIlyMat () const

const std::vector< double > &	vecIlyPipeLength () const

const std::vector< double > &	vecIlyPipePhi () const

const std::vector< double > &	vecIlyPipeType () const

const std::vector< double > &	vecIlyPipeZ () const

const std::vector< double > &	vecIlyPTMPhi () const

const std::vector< double > &	vecIlyPTMZ () const

const std::vector< double > &	vecIlyThick () const

const std::vector< std::string > &	vecMBLyrMat () const

const std::vector< std::string > &	vecMBLyrName () const

const std::vector< double > &	vecMBLyrThick () const

const std::vector< double > &	vecNomCryDimAR () const

const std::vector< double > &	vecNomCryDimBF () const

const std::vector< double > &	vecNomCryDimBR () const

const std::vector< double > &	vecNomCryDimCF () const

const std::vector< double > &	vecNomCryDimCR () const

const std::vector< std::string > &	vecPatchPanelMat () const

const std::vector< std::string > &	vecPatchPanelNames () const

const std::vector< double > &	vecPatchPanelThick () const

std::vector< double >	vecPincerEnvZOff () const

std::vector< double >	vecPincerRodAzimuth () const

const std::vector< double > &	vecSpmBRota () const

const std::vector< double > &	vecSpmBTran () const

const std::vector< double > &	vecSpmCutTM () const

const std::vector< double > &	vecSpmCutTP () const

const std::vector< double > &	vecSpmHere () const

const std::vector< double > &	vecSpmRMax () const

const std::vector< double > &	vecSpmRMin () const

const std::vector< double > &	vecSpmRota () const

const std::vector< double > &	vecSpmTran () const

const std::vector< double > &	vecSpmZPts () const

const std::vector< double > &	vecWebClrTh () const

const std::vector< double > &	vecWebLength () const

const std::vector< double > &	vecWebPlTh () const

double	wallFrAlv () const

DDMaterial	wallMat () const

const std::string &	wallName () const

double	wallReAlv () const

double	wallThAlv () const

DDMaterial	webClrMat () const

const std::string &	webClrName () const

double	webHere () const

DDMaterial	webPlMat () const

const std::string &	webPlName () const

double	wrapFrAlv () const

DDMaterial	wrapMat () const

const std::string &	wrapName () const

double	wrapReAlv () const

double	wrapThAlv () const

	~DDEcalBarrelAlgo () override

Private Member Functions
void	web (unsigned int iWeb, double bWeb, double BWeb, double LWeb, double theta, const Pt3D &corner, const DDLogicalPart &logPar, double &zee, double side, double front, double delta, DDCompactView &cpv)

Private Attributes
double	m_APDHere

std::string	m_APDMat

std::string	m_APDName

double	m_APDSide

double	m_APDThick

double	m_APDX1

double	m_APDX2

double	m_APDZ

double	m_BackBracketHeight

std::string	m_BackBracketMat

std::string	m_BackBracketName

double	m_BackCBStdSep

double	m_BackCoolBarHeight

double	m_BackCoolBarHere

std::string	m_BackCoolBarMat

std::string	m_BackCoolBarName

std::string	m_BackCoolBarSSMat

std::string	m_BackCoolBarSSName

double	m_BackCoolBarSSThick

double	m_BackCoolBarThick

std::string	m_BackCoolBarWaMat

std::string	m_BackCoolBarWaName

double	m_BackCoolBarWaThick

double	m_BackCoolBarWidth

double	m_BackCoolHere

std::string	m_BackCoolMat

double	m_BackCoolTankHere

std::string	m_BackCoolTankMat

std::string	m_BackCoolTankName

double	m_BackCoolTankThick

std::string	m_BackCoolTankWaMat

std::string	m_BackCoolTankWaName

double	m_BackCoolTankWaWidth

double	m_BackCoolTankWidth

double	m_BackCoolVFEHere

std::string	m_BackCoolVFEMat

std::string	m_BackCoolVFEName

double	m_BackHere

double	m_BackMiscHere

double	m_BackPipeHere

std::string	m_BackPipeMat

std::string	m_BackPipeName

std::string	m_BackPipeWaterMat

std::string	m_BackPlate2Mat

std::string	m_BackPlate2Name

double	m_BackPlate2Thick

double	m_BackPlateHere

double	m_BackPlateLength

std::string	m_BackPlateMat

std::string	m_BackPlateName

double	m_BackPlateThick

double	m_BackPlateWidth

double	m_BackSideAngle

double	m_BackSideHeight

double	m_BackSideHere

double	m_BackSideLength

std::string	m_BackSideMat

std::string	m_BackSideName

double	m_BackSideWidth

double	m_BackSideYOff1

double	m_BackSideYOff2

std::string	m_BackVFEMat

std::string	m_BackVFEName

double	m_BackXOff

double	m_BackYOff

double	m_BarHere

std::string	m_BarMat

std::string	m_BarName

double	m_BarPhiHi

double	m_BarPhiLo

double	m_ClrFrAlv

std::string	m_ClrMat

std::string	m_ClrName

double	m_ClrReAlv

double	m_ClrThAlv

std::string	m_CryMat

std::string	m_CryName

double	m_DryAirTubeHere

double	m_DryAirTubeInnDiam

std::string	m_DryAirTubeMat

std::string	m_DryAirTubeName

double	m_DryAirTubeOutDiam

double	m_FawDelPhi

double	m_FawHere

std::string	m_FawName

double	m_FawPhiOff

double	m_FawPhiRot

double	m_FawRadOff

double	m_GrEdgeSlotHeight

double	m_GrEdgeSlotHere

std::string	m_GrEdgeSlotMat

std::string	m_GrEdgeSlotName

double	m_GrEdgeSlotWidth

double	m_GridHere

std::string	m_GridMat

std::string	m_GridName

double	m_GridThick

double	m_GrilleHere

std::string	m_GrilleMat

std::string	m_GrilleName

double	m_GrilleThick

double	m_GrilleWidth

double	m_GrilleZSpace

double	m_GrMidSlotHere

std::string	m_GrMidSlotMat

std::string	m_GrMidSlotName

double	m_GrMidSlotWidth

double	m_GrMidSlotXOff

double	m_HawRCutDelY

double	m_HawRCutY

double	m_HawRCutZ

double	m_HawRHBIG

double	m_HawRhsml

std::string	m_HawRName

double	m_HawYOffCry

std::string	m_idNameSpace

double	m_IlyBndlLength

std::string	m_IlyBndlMat

std::string	m_IlyBndlName

double	m_IlyBndlOff

double	m_IlyDelPhi

double	m_IlyDiffLength

std::string	m_IlyDiffMat

std::string	m_IlyDiffName

double	m_IlyDiffOff

double	m_IlyFanOutHeight

double	m_IlyFanOutHere

double	m_IlyFanOutLength

std::string	m_IlyFanOutMat

std::string	m_IlyFanOutName

double	m_IlyFanOutWidth

double	m_IlyFEMHeight

double	m_IlyFEMLength

std::string	m_IlyFEMMat

std::string	m_IlyFEMName

double	m_IlyFEMWidth

double	m_IlyHere

std::string	m_IlyName

double	m_IlyPhiLow

double	m_IlyPipeHere

double	m_IlyPipeID

std::string	m_IlyPipeMat

std::string	m_IlyPipeName

double	m_IlyPipeOD

double	m_IlyPTMHeight

double	m_IlyPTMHere

double	m_IlyPTMLength

std::string	m_IlyPTMMat

std::string	m_IlyPTMName

double	m_IlyPTMWidth

double	m_MBCoolTubeHere

double	m_MBCoolTubeInnDiam

std::string	m_MBCoolTubeMat

std::string	m_MBCoolTubeName

unsigned int	m_MBCoolTubeNum

double	m_MBCoolTubeOutDiam

double	m_MBLyrHere

double	m_MBManifHere

double	m_MBManifInnDiam

std::string	m_MBManifMat

std::string	m_MBManifName

double	m_MBManifOutDiam

unsigned int	m_NCryPerAlvEta

unsigned int	m_NCryTypes

unsigned int	m_NFawPerSupm

double	m_NomCryDimAF

double	m_NomCryDimLZ

double	m_PatchPanelHere

std::string	m_PatchPanelName

double	m_PincerBlkLength

std::string	m_PincerBlkMat

std::string	m_PincerBlkName

double	m_PincerCutHeight

std::string	m_PincerCutMat

std::string	m_PincerCutName

double	m_PincerCutWidth

double	m_PincerEnvHeight

double	m_PincerEnvLength

std::string	m_PincerEnvMat

std::string	m_PincerEnvName

double	m_PincerEnvWidth

double	m_PincerRodHere

std::string	m_PincerRodMat

std::string	m_PincerRodName

std::string	m_PincerShim1Name

double	m_PincerShim1Width

std::string	m_PincerShim2Name

double	m_PincerShim2Width

double	m_PincerShimHeight

std::string	m_PincerShimMat

std::string	m_SpmCutName

double	m_SpmCutRM

double	m_SpmCutRP

int	m_SpmCutShow

double	m_SpmCutThick

double	m_SpmDelPhi

double	m_SpmExpThick

double	m_SpmExpWide

double	m_SpmExpYOff

double	m_SpmLowPhi

std::string	m_SpmMat

std::string	m_SpmName

unsigned int	m_SpmNPerHalf

double	m_SpmPhiOff

double	m_SpmSideHigh

std::string	m_SpmSideMat

std::string	m_SpmSideName

double	m_SpmSideThick

double	m_SpmSideYOffM

double	m_SpmSideYOffP

double	m_UnderAF

double	m_UnderAR

double	m_UnderBF

double	m_UnderBR

double	m_UnderCF

double	m_UnderCR

double	m_UnderLZ

std::vector< std::string >	m_vecBackCoolName

std::vector< double >	m_vecBackCoolNPerSec

std::vector< double >	m_vecBackCoolNSec

std::vector< double >	m_vecBackCoolSecSep

std::vector< std::string >	m_vecBackMiscMat

std::vector< std::string >	m_vecBackMiscName

std::vector< double >	m_vecBackMiscThick

std::vector< double >	m_vecBackPipeDiam

std::vector< double >	m_vecBackPipeThick

std::vector< std::string >	m_vecBackVFELyrMat

std::vector< std::string >	m_vecBackVFELyrName

std::vector< double >	m_vecBackVFELyrThick

std::vector< double >	m_vecBarRMax

std::vector< double >	m_vecBarRMin

std::vector< double >	m_vecBarRota

std::vector< double >	m_vecBarRota2

std::vector< double >	m_vecBarRota3

std::vector< double >	m_vecBarTran

std::vector< double >	m_vecBarZPts

std::vector< double >	m_vecGapAlvEta

std::vector< double >	m_vecGrilleHeight

std::vector< double >	m_vecGrilleZOff

std::vector< double >	m_vecGrMidSlotHeight

std::vector< double >	m_vecIlyFanOutPhi

std::vector< double >	m_vecIlyFanOutZ

std::vector< double >	m_vecIlyFEMPhi

std::vector< double >	m_vecIlyFEMZ

std::vector< std::string >	m_vecIlyMat

std::vector< double >	m_vecIlyPipeLength

std::vector< double >	m_vecIlyPipePhi

std::vector< double >	m_vecIlyPipeType

std::vector< double >	m_vecIlyPipeZ

std::vector< double >	m_vecIlyPTMPhi

std::vector< double >	m_vecIlyPTMZ

std::vector< double >	m_vecIlyThick

std::vector< std::string >	m_vecMBLyrMat

std::vector< std::string >	m_vecMBLyrName

std::vector< double >	m_vecMBLyrThick

std::vector< double >	m_vecNomCryDimAR

std::vector< double >	m_vecNomCryDimBF

std::vector< double >	m_vecNomCryDimBR

std::vector< double >	m_vecNomCryDimCF

std::vector< double >	m_vecNomCryDimCR

std::vector< std::string >	m_vecPatchPanelMat

std::vector< std::string >	m_vecPatchPanelNames

std::vector< double >	m_vecPatchPanelThick

std::vector< double >	m_vecPincerEnvZOff

std::vector< double >	m_vecPincerRodAzimuth

std::vector< double >	m_vecSpmBRota

std::vector< double >	m_vecSpmBTran

std::vector< double >	m_vecSpmCutTM

std::vector< double >	m_vecSpmCutTP

std::vector< double >	m_vecSpmHere

std::vector< double >	m_vecSpmRMax

std::vector< double >	m_vecSpmRMin

std::vector< double >	m_vecSpmRota

std::vector< double >	m_vecSpmTran

std::vector< double >	m_vecSpmZPts

std::vector< double >	m_vecWebClrTh

std::vector< double >	m_vecWebLength

std::vector< double >	m_vecWebPlTh

double	m_WallFrAlv

std::string	m_WallMat

std::string	m_WallName

double	m_WallReAlv

double	m_WallThAlv

std::string	m_WebClrMat

std::string	m_WebClrName

double	m_WebHere

std::string	m_WebPlMat

std::string	m_WebPlName

double	m_WrapFrAlv

std::string	m_WrapMat

std::string	m_WrapName

double	m_WrapReAlv

double	m_WrapThAlv

Detailed Description

Definition at line 32 of file DDEcalBarrelAlgo.cc.

Member Typedef Documentation

◆ Pt3D

typedef HepGeom::Point3D<double> DDEcalBarrelAlgo::Pt3D

Definition at line 35 of file DDEcalBarrelAlgo.cc.

◆ RfZ3D

typedef HepGeom::ReflectZ3D DDEcalBarrelAlgo::RfZ3D

Definition at line 37 of file DDEcalBarrelAlgo.cc.

◆ Ro3D

typedef HepGeom::Rotate3D DDEcalBarrelAlgo::Ro3D

Definition at line 39 of file DDEcalBarrelAlgo.cc.

◆ Rota

typedef CLHEP::HepRotation DDEcalBarrelAlgo::Rota

Definition at line 45 of file DDEcalBarrelAlgo.cc.

◆ RoX3D

typedef HepGeom::RotateX3D DDEcalBarrelAlgo::RoX3D

Definition at line 42 of file DDEcalBarrelAlgo.cc.

◆ RoY3D

typedef HepGeom::RotateY3D DDEcalBarrelAlgo::RoY3D

Definition at line 41 of file DDEcalBarrelAlgo.cc.

◆ RoZ3D

typedef HepGeom::RotateZ3D DDEcalBarrelAlgo::RoZ3D

Definition at line 40 of file DDEcalBarrelAlgo.cc.

◆ Tf3D

typedef HepGeom::Transform3D DDEcalBarrelAlgo::Tf3D

Definition at line 36 of file DDEcalBarrelAlgo.cc.

◆ Tl3D

typedef HepGeom::Translate3D DDEcalBarrelAlgo::Tl3D

Definition at line 38 of file DDEcalBarrelAlgo.cc.

◆ Trap

typedef EcalTrapezoidParameters DDEcalBarrelAlgo::Trap

Definition at line 34 of file DDEcalBarrelAlgo.cc.

◆ Vec3

typedef CLHEP::Hep3Vector DDEcalBarrelAlgo::Vec3

Definition at line 44 of file DDEcalBarrelAlgo.cc.

Constructor & Destructor Documentation

◆ DDEcalBarrelAlgo()

DDEcalBarrelAlgo::DDEcalBarrelAlgo ( )

Definition at line 738 of file DDEcalBarrelAlgo.cc.

     : m_idNameSpace(""),
       m_BarName(""),
       m_BarMat(""),
       m_vecBarZPts(),
       m_vecBarRMin(),
       m_vecBarRMax(),
       m_vecBarTran(),
       m_vecBarRota(),
       m_vecBarRota2(),
       m_vecBarRota3(),
       m_BarPhiLo(0),
       m_BarPhiHi(0),
       m_BarHere(0),
       m_SpmName(""),
       m_SpmMat(""),
       m_vecSpmZPts(),
       m_vecSpmRMin(),
       m_vecSpmRMax(),
       m_vecSpmTran(),
       m_vecSpmRota(),
       m_vecSpmBTran(),
       m_vecSpmBRota(),
       m_SpmNPerHalf(0),
       m_SpmLowPhi(0),
       m_SpmDelPhi(0),
       m_SpmPhiOff(0),
       m_vecSpmHere(),
       m_SpmCutName(""),
       m_SpmCutThick(0),
       m_SpmCutShow(0),
       m_vecSpmCutTM(),
       m_vecSpmCutTP(),
       m_SpmCutRM(0),
       m_SpmCutRP(0),
       m_SpmExpThick(0),
       m_SpmExpWide(0),
       m_SpmExpYOff(0),
       m_SpmSideName(""),
       m_SpmSideMat(""),
       m_SpmSideHigh(0),
       m_SpmSideThick(0),
       m_SpmSideYOffM(0),
       m_SpmSideYOffP(0),
       m_NomCryDimAF(0),
       m_NomCryDimLZ(0),
       m_vecNomCryDimBF(),
       m_vecNomCryDimCF(),
       m_vecNomCryDimAR(),
       m_vecNomCryDimBR(),
       m_vecNomCryDimCR(),
       m_UnderAF(0),
       m_UnderLZ(0),
       m_UnderBF(0),
       m_UnderCF(0),
       m_UnderAR(0),
       m_UnderBR(0),
       m_UnderCR(0),
       m_WallThAlv(0),
       m_WrapThAlv(0),
       m_ClrThAlv(0),
       m_vecGapAlvEta(),
       m_WallFrAlv(0),
       m_WrapFrAlv(0),
       m_ClrFrAlv(0),
       m_WallReAlv(0),
       m_WrapReAlv(0),
       m_ClrReAlv(0),
       m_NCryTypes(0),
       m_NCryPerAlvEta(0),
       m_CryName(""),
       m_ClrName(""),
       m_WrapName(""),
       m_WallName(""),
       m_CryMat(""),
       m_ClrMat(""),
       m_WrapMat(""),
       m_WallMat(""),
  
       m_APDName(""),
       m_APDHere(0),
       m_APDMat(""),
       m_APDSide(0),
       m_APDThick(0),
       m_APDZ(0),
       m_APDX1(0),
       m_APDX2(0),
  
       m_WebHere(0),
       m_WebPlName(""),
       m_WebClrName(""),
       m_WebPlMat(""),
       m_WebClrMat(""),
       m_vecWebPlTh(),
       m_vecWebClrTh(),
       m_vecWebLength(),
       m_IlyHere(0),
       m_IlyName(),
       m_IlyPhiLow(0),
       m_IlyDelPhi(0),
       m_vecIlyMat(),
       m_vecIlyThick(),
       m_IlyPipeName(""),
       m_IlyPipeHere(0),
       m_IlyPipeMat(""),
       m_IlyPipeOD(0),
       m_IlyPipeID(0),
       m_vecIlyPipeLength(),
       m_vecIlyPipeType(),
       m_vecIlyPipePhi(),
       m_vecIlyPipeZ(),
       m_IlyPTMName(""),
       m_IlyPTMHere(0),
       m_IlyPTMMat(""),
       m_IlyPTMWidth(0),
       m_IlyPTMLength(0),
       m_IlyPTMHeight(0),
       m_vecIlyPTMZ(),
       m_vecIlyPTMPhi(),
       m_IlyFanOutName(""),
       m_IlyFanOutHere(0),
       m_IlyFanOutMat(""),
       m_IlyFanOutWidth(0),
       m_IlyFanOutLength(0),
       m_IlyFanOutHeight(0),
       m_vecIlyFanOutZ(),
       m_vecIlyFanOutPhi(),
       m_IlyDiffName(""),
       m_IlyDiffMat(""),
       m_IlyDiffOff(0),
       m_IlyDiffLength(0),
       m_IlyBndlName(""),
       m_IlyBndlMat(""),
       m_IlyBndlOff(0),
       m_IlyBndlLength(0),
       m_IlyFEMName(""),
       m_IlyFEMMat(""),
       m_IlyFEMWidth(0),
       m_IlyFEMLength(0),
       m_IlyFEMHeight(0),
       m_vecIlyFEMZ(),
       m_vecIlyFEMPhi(),
       m_HawRName(""),
       m_FawName(""),
       m_FawHere(0),
       m_HawRHBIG(0),
       m_HawRhsml(0),
       m_HawRCutY(0),
       m_HawRCutZ(0),
       m_HawRCutDelY(0),
       m_HawYOffCry(0),
       m_NFawPerSupm(0),
       m_FawPhiOff(0),
       m_FawDelPhi(0),
       m_FawPhiRot(0),
       m_FawRadOff(0),
       m_GridHere(0),
       m_GridName(""),
       m_GridMat(""),
       m_GridThick(0),
       m_BackXOff(0),
       m_BackYOff(0),
       m_BackHere(0),
       m_BackSideName(""),
       m_BackSideHere(0),
       m_BackSideLength(0),
       m_BackSideHeight(0),
       m_BackSideWidth(0),
       m_BackSideYOff1(0),
       m_BackSideYOff2(0),
       m_BackSideAngle(0),
       m_BackSideMat(""),
       m_BackPlateName(""),
       m_BackPlateHere(0),
       m_BackPlateLength(0),
       m_BackPlateThick(0),
       m_BackPlateWidth(0),
       m_BackPlateMat(""),
       m_BackPlate2Name(""),
       m_BackPlate2Thick(0),
       m_BackPlate2Mat(""),
       m_GrilleName(""),
       m_GrilleHere(0),
       m_GrilleThick(0),
       m_GrilleWidth(0),
       m_GrilleZSpace(0),
       m_GrilleMat(""),
       m_vecGrilleHeight(),
       m_vecGrilleZOff(),
       m_GrEdgeSlotName(""),
       m_GrEdgeSlotMat(""),
       m_GrEdgeSlotHere(0),
       m_GrEdgeSlotHeight(0),
       m_GrEdgeSlotWidth(0),
       m_GrMidSlotName(""),
       m_GrMidSlotMat(""),
       m_GrMidSlotHere(0),
       m_GrMidSlotWidth(0),
       m_GrMidSlotXOff(0),
       m_vecGrMidSlotHeight(),
       m_BackPipeHere(0),
       m_BackPipeName(""),
       m_vecBackPipeDiam(),
       m_vecBackPipeThick(),
       m_BackPipeMat(""),
       m_BackPipeWaterMat(""),
  
       m_vecBackCoolName(),
       m_BackCoolHere(0),
       m_BackCoolBarHere(0),
       m_BackCoolBarWidth(0),
       m_BackCoolBarHeight(0),
       m_BackCoolMat(""),
       m_BackCoolBarName(""),
       m_BackCoolBarThick(0),
       m_BackCoolBarMat(""),
       m_BackCoolBarSSName(""),
       m_BackCoolBarSSThick(0),
       m_BackCoolBarSSMat(""),
       m_BackCoolBarWaName(""),
       m_BackCoolBarWaThick(0),
       m_BackCoolBarWaMat(""),
       m_BackCoolVFEHere(0),
       m_BackCoolVFEName(""),
       m_BackCoolVFEMat(""),
       m_BackVFEName(""),
       m_BackVFEMat(""),
       m_vecBackVFELyrThick(),
       m_vecBackVFELyrName(),
       m_vecBackVFELyrMat(),
       m_vecBackCoolNSec(),
       m_vecBackCoolSecSep(),
       m_vecBackCoolNPerSec(),
  
       m_BackMiscHere(0),
       m_vecBackMiscThick(),
       m_vecBackMiscName(),
       m_vecBackMiscMat(),
       m_BackCBStdSep(0),
       m_PatchPanelHere(0),
       m_PatchPanelName(""),
       m_vecPatchPanelThick(),
       m_vecPatchPanelNames(),
       m_vecPatchPanelMat(),
       m_BackCoolTankHere(0),
       m_BackCoolTankName(""),
       m_BackCoolTankWidth(0),
       m_BackCoolTankThick(0),
       m_BackCoolTankMat(""),
       m_BackCoolTankWaName(""),
       m_BackCoolTankWaWidth(0),
       m_BackCoolTankWaMat(""),
       m_BackBracketName(""),
       m_BackBracketHeight(0),
       m_BackBracketMat(""),
  
       m_DryAirTubeHere(0),
       m_DryAirTubeName(""),
       m_MBCoolTubeNum(0),
       m_DryAirTubeInnDiam(0),
       m_DryAirTubeOutDiam(0),
       m_DryAirTubeMat(""),
       m_MBCoolTubeHere(0),
       m_MBCoolTubeName(""),
       m_MBCoolTubeInnDiam(0),
       m_MBCoolTubeOutDiam(0),
       m_MBCoolTubeMat(""),
       m_MBManifHere(0),
       m_MBManifName(""),
       m_MBManifInnDiam(0),
       m_MBManifOutDiam(0),
       m_MBManifMat(""),
       m_MBLyrHere(0),
       m_vecMBLyrThick(0),
       m_vecMBLyrName(),
       m_vecMBLyrMat(),
  
       m_PincerRodHere(0),
       m_PincerRodName(""),
       m_PincerRodMat(""),
       m_vecPincerRodAzimuth(),
       m_PincerEnvName(""),
       m_PincerEnvMat(""),
       m_PincerEnvWidth(0),
       m_PincerEnvHeight(0),
       m_PincerEnvLength(0),
       m_vecPincerEnvZOff(),
       m_PincerBlkName(""),
       m_PincerBlkMat(""),
       m_PincerBlkLength(0),
       m_PincerShim1Name(""),
       m_PincerShimHeight(0),
       m_PincerShim2Name(""),
       m_PincerShimMat(""),
       m_PincerShim1Width(0),
       m_PincerShim2Width(0),
       m_PincerCutName(""),
       m_PincerCutMat(""),
       m_PincerCutWidth(0),
       m_PincerCutHeight(0)
  
 {
   LogDebug("EcalGeom") << "DDEcalBarrelAlgo info: Creating an instance";
 }

References LogDebug.

◆ ~DDEcalBarrelAlgo()

2910 { return DDMaterial(ddname(s)); }

References ddname(), and alignCSCRings::s.

Referenced by apdMat(), backBracketMat(), backCoolBarMat(), backCoolBarSSMat(), backCoolBarWaMat(), backCoolMat(), backCoolTankMat(), backCoolTankWaMat(), backCoolVFEMat(), backPipeMat(), backPipeWaterMat(), backPlate2Mat(), backPlateMat(), backSideMat(), backVFEMat(), barMat(), clrMat(), cryMat(), dryAirTubeMat(), execute(), grEdgeSlotMat(), gridMat(), grilleMat(), grMidSlotMat(), ilyBndlMat(), ilyDiffMat(), ilyFanOutMat(), ilyFEMMat(), ilyPipeMat(), ilyPTMMat(), mBCoolTubeMat(), mBManifMat(), pincerBlkMat(), pincerCutMat(), pincerEnvMat(), pincerRodMat(), pincerShimMat(), spmMat(), spmSideMat(), wallMat(), webClrMat(), webPlMat(), and wrapMat().

◆ ddname()

DDName DDEcalBarrelAlgo::ddname ( const std::string & s ) const

Definition at line 2912 of file DDEcalBarrelAlgo.cc.

                                                         {
   const pair<std::string, std::string> temp(DDSplit(s));
   if (temp.second.empty()) {
     return DDName(temp.first, m_idNameSpace);
   } else {
     return DDName(temp.first, temp.second);
   }
 }

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Back Side Plates !!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Back Side Plates !!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Mother Board Cooling Manifold Setup !!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Mother Board Cooling Manifold Setup !!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Loop over Grilles & MB Cooling Manifold !!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Loop over Grilles & MB Cooling Manifold !!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Cooling Bar Setup !!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Cooling Bar Setup !!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin VFE Card Setup !!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End VFE Card Setup !!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Cooling Bar + VFE Setup !!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Cooling Bar + VFE Setup !!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Placement of Readout & Cooling by Module !!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Back Water Pipes !!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Back Water Pipes !!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Placement of Cooling + VFE Cards !!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Placement of Cooling + VFE Cards !!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Placement of Readout & Cooling by Module !!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Patch Panel !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Patch Panel !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Pincers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Pincers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Definition at line 1381 of file DDEcalBarrelAlgo.cc.

                                                  {
   LogDebug("EcalGeom") << "******** DDEcalBarrelAlgo execute!" << std::endl;
  
   if (barHere() != 0) {
     const unsigned int copyOne(1);
     const unsigned int copyTwo(2);
     // Barrel parent volume----------------------------------------------------------
     cpv.position(
         DDLogicalPart(barName(),
                       barMat(),
                       DDSolidFactory::polycone(
                           barName(), barPhiLo(), (barPhiHi() - barPhiLo()), vecBarZPts(), vecBarRMin(), vecBarRMax())),
         parent().name(),
         copyOne,
         DDTranslation(vecBarTran()[0], vecBarTran()[1], vecBarTran()[2]),
         myrot(barName().name() + "Rot",
               Rota(Vec3(vecBarRota3()[0], vecBarRota3()[1], vecBarRota3()[2]), vecBarRota3()[3]) *
                   Rota(Vec3(vecBarRota2()[0], vecBarRota2()[1], vecBarRota2()[2]), vecBarRota2()[3]) *
                   Rota(Vec3(vecBarRota()[0], vecBarRota()[1], vecBarRota()[2]), vecBarRota()[3])));
     // End Barrel parent volume----------------------------------------------------------
  
     // Supermodule parent------------------------------------------------------------
  
     const DDName spmcut1ddname((0 != spmCutShow()) ? spmName() : ddname(m_SpmName + "CUT1"));
     const DDSolid ddspm(
         DDSolidFactory::polycone(spmcut1ddname, spmLowPhi(), spmDelPhi(), vecSpmZPts(), vecSpmRMin(), vecSpmRMax()));
  
     const unsigned int indx(vecSpmRMax().size() / 2);
  
     // Deal with the cut boxes first
     const DDSolid spmCutBox(DDSolidFactory::box(spmCutName(),
                                                 1.05 * (vecSpmRMax()[indx] - vecSpmRMin()[indx]) / 2.,
                                                 spmCutThick() / 2.,
                                                 fabs(vecSpmZPts().back() - vecSpmZPts().front()) / 2. + 1 * mm));
     const std::vector<double>& cutBoxParms(spmCutBox.parameters());
     const DDLogicalPart spmCutLog(spmCutName(), spmMat(), spmCutBox);
  
     // Now the expansion box
     const double xExp(spmExpThick() / 2.);
     const double yExp(spmExpWide() / 2.);
     const double zExp(fabs(vecSpmZPts().back() - vecSpmZPts().front()) / 2.);
     const DDName expName(m_SpmName + "EXP");
     const DDSolid spmExpBox(DDSolidFactory::box(expName, xExp, yExp, zExp));
     const DDTranslation expTra(vecSpmRMax().back() - xExp, spmExpYOff(), vecSpmZPts().front() + zExp);
     const DDLogicalPart expLog(expName, spmMat(), spmExpBox);
  
     // Supermodule side platess
     const DDSolid sideSolid(DDSolidFactory::box(
         spmSideName(), spmSideHigh() / 2., spmSideThick() / 2., fabs(vecSpmZPts()[1] - vecSpmZPts()[0]) / 2.));
     const std::vector<double>& sideParms(sideSolid.parameters());
     const DDLogicalPart sideLog(spmSideName(), spmSideMat(), sideSolid);
  
     DDSolid temp1;
     DDSolid temp2;
     for (unsigned int icopy(1); icopy <= 2; ++icopy) {
       const std::vector<double>& tvec(1 == icopy ? vecSpmCutTM() : vecSpmCutTP());
       const double rang(1 == icopy ? spmCutRM() : spmCutRP());
  
       const Tl3D tr(tvec[0], tvec[1], tvec[2]);
       const RoZ3D ro(rang);
       const Tf3D alltrot(
           RoZ3D(1 == icopy ? spmLowPhi() : spmLowPhi() + spmDelPhi()) *
           Tl3D((vecSpmRMax()[indx] + vecSpmRMin()[indx]) / 2., 0, (vecSpmZPts().front() + vecSpmZPts().back()) / 2.) *
           tr * ro);
  
       const DDRotation ddrot(myrot(spmCutName().name() + std::to_string(icopy), alltrot.getRotation()));
       const DDTranslation ddtra(alltrot.getTranslation());
  
       const Tl3D trSide(tvec[0],
                         tvec[1] + (1 == icopy ? 1. : -1.) * (cutBoxParms[1] + sideParms[1]) +
                             (1 == icopy ? spmSideYOffM() : spmSideYOffP()),
                         tvec[2]);
       const RoZ3D roSide(rang);
       const Tf3D sideRot(RoZ3D(1 == icopy ? spmLowPhi() : spmLowPhi() + spmDelPhi()) *
                          Tl3D(vecSpmRMin().front() + sideParms[0], 0, vecSpmZPts().front() + sideParms[2]) * trSide *
                          roSide);
  
       const DDRotation sideddrot(myrot(spmSideName().name() + std::to_string(icopy), sideRot.getRotation()));
       const DDTranslation sideddtra(sideRot.getTranslation());
  
       cpv.position(sideLog, spmName(), icopy, sideddtra, sideddrot);
  
       if (0 != spmCutShow())  // do this if we are "showing" the boxes
       {
         cpv.position(spmCutLog, spmName(), icopy, ddtra, ddrot);
       } else  // do this if we are subtracting the boxes
       {
         if (1 == icopy) {
           temp1 = DDSolidFactory::subtraction(DDName(m_SpmName + "_T1"), spmcut1ddname, spmCutBox, ddtra, ddrot);
         } else {
           temp2 = DDSolidFactory::subtraction(spmName(), temp1, spmCutBox, ddtra, ddrot);
         }
       }
     }
  
     const DDLogicalPart spmLog(spmName(), spmMat(), ((0 != spmCutShow()) ? ddspm : temp2));
  
     const double dphi(360. * deg / (1. * spmNPerHalf()));
     for (unsigned int iphi(0); iphi < 2 * spmNPerHalf(); ++iphi) {
       const double phi(iphi * dphi + spmPhiOff());  //- 0.000130/deg ) ;
  
       // this base rotation includes the base translation & rotation
       // plus flipping for the negative z hemisphere, plus
       // the phi rotation for this module
       const Tf3D rotaBase(RoZ3D(phi) * (iphi < spmNPerHalf() ? Ro3D() : RoX3D(180. * deg)) *
                           Ro3D(vecSpmBRota()[3], Vec3(vecSpmBRota()[0], vecSpmBRota()[1], vecSpmBRota()[2])) *
                           Tl3D(Vec3(vecSpmBTran()[0], vecSpmBTran()[1], vecSpmBTran()[2])));
  
       // here the individual rotations & translations of the supermodule
       // are implemented on top of the overall "base" rotation & translation
  
       const unsigned int offr(4 * iphi);
       const unsigned int offt(3 * iphi);
  
       const Ro3D r1(vecSpmRota()[offr + 3],
                     Vec3(vecSpmRota()[offr + 0], vecSpmRota()[offr + 1], vecSpmRota()[offr + 2]));
  
       const Tf3D rotaExtra(r1 * Tl3D(Vec3(vecSpmTran()[offt + 0], vecSpmTran()[offt + 1], vecSpmTran()[offt + 2])));
  
       const Tf3D both(rotaExtra * rotaBase);
  
       const DDRotation rota(myrot(spmName().name() + std::to_string(phi / deg), both.getRotation()));
  
       if (vecSpmHere()[iphi] != 0) {
         // convert from CLHEP to DDTranslation & etc. -- Michael Case
         DDTranslation myTran(both.getTranslation().x(), both.getTranslation().y(), both.getTranslation().z());
         cpv.position(spmLog, barName(), iphi + 1, myTran, rota);
       }
     }
     // End Supermodule parent------------------------------------------------------------
  
     // Begin Inner Layer volumes---------------------------------------------------------
     const double ilyLength(vecSpmZPts()[1] - vecSpmZPts()[0]);
     double ilyRMin(vecSpmRMin()[0]);
     double ilyThick(0);
     for (unsigned int ilyx(0); ilyx != vecIlyThick().size(); ++ilyx) {
       ilyThick += vecIlyThick()[ilyx];
     }
     const DDName ilyDDName(ddname(ilyName()));
     const DDSolid ilySolid(
         DDSolidFactory::tubs(ilyDDName, ilyLength / 2, ilyRMin, ilyRMin + ilyThick, ilyPhiLow(), ilyDelPhi()));
     const DDLogicalPart ilyLog(ilyDDName, spmMat(), ilySolid);
     cpv.position(ilyLog, spmLog, copyOne, DDTranslation(0, 0, ilyLength / 2), DDRotation());
  
     DDLogicalPart ilyPipeLog[200];
  
     if (0 != ilyPipeHere()) {
       for (unsigned int iPipeType(0); iPipeType != vecIlyPipeLength().size(); ++iPipeType) {
         const DDName pName(ddname(ilyPipeName() + "_" + std::to_string(iPipeType + 1)));
  
         DDSolid ilyPipeSolid(
             DDSolidFactory::tubs(pName, vecIlyPipeLength()[iPipeType] / 2., 0, ilyPipeOD() / 2, 0 * deg, 360 * deg));
         ilyPipeLog[iPipeType] = DDLogicalPart(pName, ilyPipeMat(), ilyPipeSolid);
  
         const DDName pWaName(ddname(ilyPipeName() + "Wa_" + std::to_string(iPipeType + 1)));
         DDSolid ilyPipeWaSolid(
             DDSolidFactory::tubs(pWaName, vecIlyPipeLength()[iPipeType] / 2., 0, ilyPipeID() / 2, 0 * deg, 360 * deg));
         const DDLogicalPart ilyPipeWaLog(pWaName, backPipeWaterMat(), ilyPipeWaSolid);
  
         cpv.position(ilyPipeWaLog, pName, copyOne, DDTranslation(0, 0, 0), DDRotation());
       }
     }
  
     DDSolid ilyPTMSolid(
         DDSolidFactory::box(ilyPTMName(), ilyPTMHeight() / 2., ilyPTMWidth() / 2., ilyPTMLength() / 2.));
     const DDLogicalPart ilyPTMLog(ilyPTMName(), ilyPTMMat(), ilyPTMSolid);
  
     DDSolid ilyFanOutSolid(
         DDSolidFactory::box(ilyFanOutName(), ilyFanOutHeight() / 2., ilyFanOutWidth() / 2., ilyFanOutLength() / 2.));
     const DDLogicalPart ilyFanOutLog(ilyFanOutName(), ilyFanOutMat(), ilyFanOutSolid);
  
     DDSolid ilyFEMSolid(
         DDSolidFactory::box(ilyFEMName(), ilyFEMHeight() / 2., ilyFEMWidth() / 2., ilyFEMLength() / 2.));
     const DDLogicalPart ilyFEMLog(ilyFEMName(), ilyFEMMat(), ilyFEMSolid);
  
     DDSolid ilyDiffSolid(
         DDSolidFactory::box(ilyDiffName(), ilyFanOutHeight() / 2., ilyFanOutWidth() / 2., ilyDiffLength() / 2.));
     const DDLogicalPart ilyDiffLog(ilyDiffName(), ilyDiffMat(), ilyDiffSolid);
  
     DDSolid ilyBndlSolid(
         DDSolidFactory::box(ilyBndlName(), ilyFanOutHeight() / 2., ilyFanOutWidth() / 2., ilyBndlLength() / 2.));
     const DDLogicalPart ilyBndlLog(ilyBndlName(), ilyBndlMat(), ilyBndlSolid);
     cpv.position(ilyDiffLog,
                  ilyFanOutName(),
                  copyOne,
                  DDTranslation(0, 0, -ilyFanOutLength() / 2 + ilyDiffLength() / 2 + ilyDiffOff()),
                  DDRotation());
     cpv.position(ilyBndlLog,
                  ilyFanOutName(),
                  copyOne,
                  DDTranslation(0, 0, -ilyFanOutLength() / 2 + ilyBndlLength() / 2 + ilyBndlOff()),
                  DDRotation());
  
     for (unsigned int ily(0); ily != vecIlyThick().size(); ++ily) {
       const double ilyRMax(ilyRMin + vecIlyThick()[ily]);
       const DDName xilyName(ddname(ilyName() + std::to_string(ily)));
       const DDSolid xilySolid(
           DDSolidFactory::tubs(xilyName, ilyLength / 2, ilyRMin, ilyRMax, ilyPhiLow(), ilyDelPhi()));
  
       const DDLogicalPart xilyLog(xilyName, ddmat(vecIlyMat()[ily]), xilySolid);
  
       if (0 != ilyHere()) {
         cpv.position(xilyLog, ilyLog, copyOne, DDTranslation(0, 0, 0), DDRotation());
  
         unsigned int copyNum[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
  
         if (10 * mm < vecIlyThick()[ily] && vecIlyThick().size() != (ily + 1) && 0 != ilyPipeHere()) {
           if (0 != ilyPTMHere()) {
             unsigned int ptmCopy(0);
             for (unsigned int ilyPTM(0); ilyPTM != vecIlyPTMZ().size(); ++ilyPTM) {
               const double radius(ilyRMax - 1 * mm - ilyPTMHeight() / 2.);
               const double phi(vecIlyPTMPhi()[ilyPTM]);
               const double yy(radius * sin(phi));
               const double xx(radius * cos(phi));
               ++ptmCopy;
               cpv.position(ilyPTMLog,
                            xilyLog,
                            ptmCopy,
                            DDTranslation(xx, yy, vecIlyPTMZ()[ilyPTM] - ilyLength / 2),
                            myrot(ilyPTMLog.name().name() + "_rot" + std::to_string(ptmCopy), CLHEP::HepRotationZ(phi)));
             }
           }
           if (0 != ilyFanOutHere()) {
             unsigned int fanOutCopy(0);
             for (unsigned int ilyFO(0); ilyFO != vecIlyFanOutZ().size(); ++ilyFO) {
               const double radius(ilyRMax - 1 * mm - ilyFanOutHeight() / 2.);
               const double phi(vecIlyFanOutPhi()[ilyFO]);
               const double yy(radius * sin(phi));
               const double xx(radius * cos(phi));
               ++fanOutCopy;
               cpv.position(ilyFanOutLog,
                            xilyLog,
                            fanOutCopy,
                            DDTranslation(xx, yy, vecIlyFanOutZ()[ilyFO] - ilyLength / 2),
                            myrot(ilyFanOutLog.name().name() + "_rot" + std::to_string(fanOutCopy),
                                  CLHEP::HepRotationZ(phi) * CLHEP::HepRotationY(180 * deg)));
             }
             unsigned int femCopy(0);
             for (unsigned int ilyFEM(0); ilyFEM != vecIlyFEMZ().size(); ++ilyFEM) {
               const double radius(ilyRMax - 1 * mm - ilyFEMHeight() / 2.);
               const double phi(vecIlyFEMPhi()[ilyFEM]);
               const double yy(radius * sin(phi));
               const double xx(radius * cos(phi));
               ++femCopy;
               cpv.position(ilyFEMLog,
                            xilyLog,
                            femCopy,
                            DDTranslation(xx, yy, vecIlyFEMZ()[ilyFEM] - ilyLength / 2),
                            myrot(ilyFEMLog.name().name() + "_rot" + std::to_string(femCopy), CLHEP::HepRotationZ(phi)));
             }
           }
           for (unsigned int iPipe(0); iPipe != vecIlyPipePhi().size(); ++iPipe) {
             const unsigned int type(static_cast<unsigned int>(round(vecIlyPipeType()[iPipe])));
             //        std::cout<<" iPipe, type= " << iPipe << ", " << type << std::endl ;
             const double zz(-ilyLength / 2 + vecIlyPipeZ()[iPipe] + (9 > type ? vecIlyPipeLength()[type] / 2. : 0));
  
             for (unsigned int ly(0); ly != 2; ++ly) {
               const double radius(0 == ly ? ilyRMin + ilyPipeOD() / 2. + 1 * mm : ilyRMax - ilyPipeOD() / 2. - 1 * mm);
               const double phi(vecIlyPipePhi()[iPipe]);
               const double yy(radius * sin(phi));
               const double xx(radius * cos(phi));
               ++copyNum[type],
                   cpv.position(
                       ilyPipeLog[type],
                       xilyLog,
                       copyNum[type],
                       DDTranslation(xx, yy, zz),
                       (9 > type ? DDRotation()
                                 : myrot(ilyPipeLog[type].name().name() + "_rot" + std::to_string(copyNum[type]),
                                         Rota(Vec3(xx, yy, 0), 90 * deg))));
             }
           }
         }
       }
       ilyRMin = ilyRMax;
     }
     // End Inner Layer volumes---------------------------------------------------------
  
     const DDName clyrName(DDName("ECLYR"));
     std::vector<double> cri;
     std::vector<double> cro;
     std::vector<double> czz;
     czz.emplace_back(vecSpmZPts()[1]);
     cri.emplace_back(vecSpmRMin()[0]);
     cro.emplace_back(vecSpmRMin()[0] + 25 * mm);
     czz.emplace_back(vecSpmZPts()[2]);
     cri.emplace_back(vecSpmRMin()[2]);
     cro.emplace_back(vecSpmRMin()[2] + 10 * mm);
     const DDSolid clyrSolid(DDSolidFactory::polycone(clyrName, -9.5 * deg, 19 * deg, czz, cri, cro));
     const DDLogicalPart clyrLog(clyrName, ddmat(vecIlyMat()[4]), clyrSolid);
     cpv.position(clyrLog, spmLog, copyOne, DDTranslation(0, 0, 0), DDRotation());
  
     // Begin Alveolar Wedge parent ------------------------------------------------------
     //----------------
  
     // the next few lines accumulate dimensions appropriate to crystal type 1
     // which we use to set some of the features of the half-alveolar wedge (hawR).
  
     //      const double ANom1 ( vecNomCryDimAR()[0] ) ;
     const double BNom1(vecNomCryDimCR()[0]);
     const double bNom1(vecNomCryDimCF()[0]);
     //      const double HNom1 ( vecNomCryDimBR()[0] ) ;
     //      const double hNom1 ( vecNomCryDimBF()[0] ) ;
     const double sWall1(wallThAlv());
     const double fWall1(wallFrAlv());
     //      const double rWall1( wallReAlv() ) ;
     const double sWrap1(wrapThAlv());
     const double fWrap1(wrapFrAlv());
     //      const double rWrap1( wrapReAlv() ) ;
     const double sClr1(clrThAlv());
     const double fClr1(clrFrAlv());
     //      const double rClr1 ( clrReAlv() ) ;
     const double LNom1(nomCryDimLZ());
     const double beta1(atan((BNom1 - bNom1) / LNom1));
     //      const double cosbeta1   ( cos( beta1 ) ) ;
     const double sinbeta1(sin(beta1));
  
     const double tana_hawR((BNom1 - bNom1) / LNom1);
  
     const double H_hawR(hawRHBIG());
     const double h_hawR(hawRhsml());
     const double a_hawR(bNom1 + sClr1 + 2 * sWrap1 + 2 * sWall1 - sinbeta1 * (fClr1 + fWrap1 + fWall1));
     const double B_hawR(a_hawR + H_hawR * tana_hawR);
     const double b_hawR(a_hawR + h_hawR * tana_hawR);
     const double L_hawR(vecSpmZPts()[2]);
  
     const Trap trapHAWR(a_hawR / 2.,  //double aHalfLengthXNegZLoY , // bl1, A/2
                         a_hawR / 2.,  //double aHalfLengthXPosZLoY , // bl2, a/2
                         b_hawR / 2.,  //double aHalfLengthXPosZHiY , // tl2, b/2
                         H_hawR / 2.,  //double aHalfLengthYNegZ    , // h1, H/2
                         h_hawR / 2.,  //double aHalfLengthYPosZ    , // h2, h/2
                         L_hawR / 2.,  //double aHalfLengthZ        , // dz,  L/2
                         90 * deg,     //double aAngleAD            , // alfa1
                         0,            //double aCoord15X           , // x15
                         0             //double aCoord15Y             // y15
     );
  
     const DDName hawRName1(ddname(hawRName().name() + "1"));
     const DDSolid hawRSolid1(mytrap(hawRName1.name(), trapHAWR));
     const DDLogicalPart hawRLog1(hawRName1, spmMat(), hawRSolid1);
  
     const double al1_fawR(atan((B_hawR - a_hawR) / H_hawR) + M_PI_2);
  
     // here is trap for Full Alveolar Wedge
     const Trap trapFAW(a_hawR,       //double aHalfLengthXNegZLoY , // bl1, A/2
                        a_hawR,       //double aHalfLengthXPosZLoY , // bl2, a/2
                        b_hawR,       //double aHalfLengthXPosZHiY , // tl2, b/2
                        H_hawR / 2.,  //double aHalfLengthYNegZ    , // h1, H/2
                        h_hawR / 2.,  //double aHalfLengthYPosZ    , // h2, h/2
                        L_hawR / 2.,  //double aHalfLengthZ        , // dz,  L/2
                        al1_fawR,     //double aAngleAD            , // alfa1
                        0,            //double aCoord15X           , // x15
                        0             //double aCoord15Y             // y15
     );
  
     const DDName fawName1(ddname(fawName().name() + "1"));
     const DDSolid fawSolid1(mytrap(fawName1.name(), trapFAW));
     const DDLogicalPart fawLog1(fawName1, spmMat(), fawSolid1);
  
     const Trap::VertexList vHAW(trapHAWR.vertexList());
     const Trap::VertexList vFAW(trapFAW.vertexList());
  
     const double hawBoxClr(1 * mm);
  
     // HAW cut box to cut off back end of wedge
     const DDName hawCutName(ddname(hawRName().name() + "CUTBOX"));
     const DDSolid hawCutBox(DDSolidFactory::box(hawCutName, b_hawR / 2 + hawBoxClr, hawRCutY() / 2, hawRCutZ() / 2));
     const std::vector<double>& hawBoxParms(hawCutBox.parameters());
     const DDLogicalPart hawCutLog(hawCutName, spmMat(), hawCutBox);
  
     const Pt3D b1(hawBoxParms[0], hawBoxParms[1], hawBoxParms[2]);
     const Pt3D b2(-hawBoxParms[0], hawBoxParms[1], hawBoxParms[2]);
     const Pt3D b3(-hawBoxParms[0], hawBoxParms[1], -hawBoxParms[2]);
  
     const double zDel(sqrt(4 * hawBoxParms[2] * hawBoxParms[2] - (h_hawR - hawRCutDelY()) * (h_hawR - hawRCutDelY())));
  
     const Tf3D hawCutForm(b1,
                           b2,
                           b3,
                           vHAW[2] + Pt3D(hawBoxClr, -hawRCutDelY(), 0),
                           vHAW[1] + Pt3D(-hawBoxClr, -hawRCutDelY(), 0),
                           Pt3D(vHAW[0].x() - hawBoxClr, vHAW[0].y(), vHAW[0].z() - zDel));
  
     const DDSolid hawRSolid(DDSolidFactory::subtraction(
         hawRName(),
         hawRSolid1,
         hawCutBox,
         DDTranslation(
             hawCutForm.getTranslation().x(), hawCutForm.getTranslation().y(), hawCutForm.getTranslation().z()),
         myrot(hawCutName.name() + "R", hawCutForm.getRotation())));
     const DDLogicalPart hawRLog(hawRName(), spmMat(), hawRSolid);
  
     // FAW cut box to cut off back end of wedge
     const DDName fawCutName(ddname(fawName().name() + "CUTBOX"));
     const DDSolid fawCutBox(DDSolidFactory::box(fawCutName, 2 * hawBoxParms[0], hawBoxParms[1], hawBoxParms[2]));
  
     const std::vector<double>& fawBoxParms(fawCutBox.parameters());
     const DDLogicalPart fawCutLog(fawCutName, spmMat(), fawCutBox);
  
     const Pt3D bb1(fawBoxParms[0], fawBoxParms[1], fawBoxParms[2]);
     const Pt3D bb2(-fawBoxParms[0], fawBoxParms[1], fawBoxParms[2]);
     const Pt3D bb3(-fawBoxParms[0], fawBoxParms[1], -fawBoxParms[2]);
  
     const Tf3D fawCutForm(bb1,
                           bb2,
                           bb3,
                           vFAW[2] + Pt3D(2 * hawBoxClr, -5 * mm, 0),
                           vFAW[1] + Pt3D(-2 * hawBoxClr, -5 * mm, 0),
                           Pt3D(vFAW[1].x() - 2 * hawBoxClr, vFAW[1].y() - trapFAW.h(), vFAW[1].z() - zDel));
  
     const DDSolid fawSolid(DDSolidFactory::subtraction(
         fawName(),
         fawSolid1,
         fawCutBox,
         DDTranslation(
             fawCutForm.getTranslation().x(), fawCutForm.getTranslation().y(), fawCutForm.getTranslation().z()),
         myrot(fawCutName.name() + "R", fawCutForm.getRotation())));
     const DDLogicalPart fawLog(fawName(), spmMat(), fawSolid);
  
     const Tf3D hawRform(vHAW[3],
                         vHAW[0],
                         vHAW[1],  // HAW inside FAW
                         vFAW[3],
                         0.5 * (vFAW[0] + vFAW[3]),
                         0.5 * (vFAW[1] + vFAW[2]));
     cpv.position(
         hawRLog,
         fawLog,
         copyOne,
         DDTranslation(hawRform.getTranslation().x(), hawRform.getTranslation().y(), hawRform.getTranslation().z()),
         myrot(hawRName().name() + "R", hawRform.getRotation()));
  
     cpv.position(
         hawRLog,
         fawLog,
         copyTwo,
         DDTranslation(-hawRform.getTranslation().x(), -hawRform.getTranslation().y(), -hawRform.getTranslation().z()),
         myrot(hawRName().name() + "RotRefl",
               CLHEP::HepRotationY(180 * deg) *  // rotate about Y after refl thru Z
                   CLHEP::HepRep3x3(1, 0, 0, 0, 1, 0, 0, 0, -1)));
  
     /* this for display of haw cut box instead of subtraction
       cpv.position( hawCutLog,
          hawRName, 
          copyOne, 
          hawCutForm.getTranslation(),
          myrot( hawCutName.name()+"R", 
             hawCutForm.getRotation() )   ) ;
 */
  
     for (unsigned int iPhi(1); iPhi <= nFawPerSupm(); ++iPhi) {
       const double rPhi(fawPhiOff() + (iPhi - 0.5) * fawDelPhi());
  
       const Tf3D fawform(RoZ3D(rPhi) * Tl3D(fawRadOff() + (trapFAW.H() + trapFAW.h()) / 4, 0, trapFAW.L() / 2) *
                          RoZ3D(-90 * deg + fawPhiRot()));
       if (fawHere())
         cpv.position(
             fawLog,
             spmLog,
             iPhi,
             DDTranslation(fawform.getTranslation().x(), fawform.getTranslation().y(), fawform.getTranslation().z()),
             myrot(fawName().name() + "_Rot" + std::to_string(iPhi), fawform.getRotation()));
     }
  
     // End Alveolar Wedge parent ------------------------------------------------------
  
     // Begin Grid + Tablet insertion
  
     const double h_Grid(gridThick());
  
     const Trap trapGrid((B_hawR - h_Grid * (B_hawR - a_hawR) / H_hawR) / 2,  // bl1, A/2
                         (b_hawR - h_Grid * (B_hawR - a_hawR) / H_hawR) / 2,  // bl2, a/2
                         b_hawR / 2.,                                         // tl2, b/2
                         h_Grid / 2.,                                         // h1, H/2
                         h_Grid / 2.,                                         // h2, h/2
                         (L_hawR - 8 * cm) / 2.,                              // dz,  L/2
                         90 * deg,                                            // alfa1
                         0,                                                   // x15
                         H_hawR - h_hawR                                      // y15
     );
  
     const DDSolid gridSolid(mytrap(gridName().name(), trapGrid));
     const DDLogicalPart gridLog(gridName(), gridMat(), gridSolid);
  
     const Trap::VertexList vGrid(trapGrid.vertexList());
  
     const Tf3D gridForm(vGrid[4],
                         vGrid[5],
                         vGrid[6],  // Grid inside HAW
                         vHAW[5] - Pt3D(0, h_Grid, 0),
                         vHAW[5],
                         vHAW[6]);
  
     if (0 != gridHere())
       cpv.position(
           gridLog,
           hawRLog,
           copyOne,
           DDTranslation(gridForm.getTranslation().x(), gridForm.getTranslation().y(), gridForm.getTranslation().z()),
           myrot(gridName().name() + "R", gridForm.getRotation()));
  
     // End Grid + Tablet insertion
  
     // begin filling Wedge with crystal plus supports --------------------------
  
     const double aNom(nomCryDimAF());
     const double LNom(nomCryDimLZ());
  
     const double AUnd(underAR());
     const double aUnd(underAF());
     //      const double BUnd ( underCR() ) ;
     const double bUnd(underCF());
     const double HUnd(underBR());
     const double hUnd(underBF());
     const double LUnd(underLZ());
  
     const double sWall(wallThAlv());
     const double sWrap(wrapThAlv());
     const double sClr(clrThAlv());
  
     const double fWall(wallFrAlv());
     const double fWrap(wrapFrAlv());
     const double fClr(clrFrAlv());
  
     const double rWall(wallReAlv());
     const double rWrap(wrapReAlv());
     const double rClr(clrReAlv());
  
     // theta is angle in yz plane between z axis & leading edge of crystal
     double theta(90 * deg);
     double zee(0 * mm);
     double side(0 * mm);
     double zeta(0 * deg);  // increment in theta for last crystal
  
     for (unsigned int cryType(1); cryType <= nCryTypes(); ++cryType) {
       const std::string sType("_" + std::string(10 > cryType ? "0" : "") + std::to_string(cryType));
  
       LogDebug("EcalGeom") << "Crytype=" << cryType;
       const double ANom(vecNomCryDimAR()[cryType - 1]);
       const double BNom(vecNomCryDimCR()[cryType - 1]);
       const double bNom(vecNomCryDimCF()[cryType - 1]);
       const double HNom(vecNomCryDimBR()[cryType - 1]);
       const double hNom(vecNomCryDimBF()[cryType - 1]);
  
       const double alfCry(90 * deg + atan((bNom - bUnd - aNom + aUnd) / (hNom - hUnd)));
  
       const Trap trapCry((ANom - AUnd) / 2.,         //double aHalfLengthXNegZLoY , // bl1, A/2
                          (aNom - aUnd) / 2.,         //double aHalfLengthXPosZLoY , // bl2, a/2
                          (bNom - bUnd) / 2.,         //double aHalfLengthXPosZHiY , // tl2, b/2
                          (HNom - HUnd) / 2.,         //double aHalfLengthYNegZ    , // h1, H/2
                          (hNom - hUnd) / 2.,         //double aHalfLengthYPosZ    , // h2, h/2
                          (LNom - LUnd) / 2.,         //double aHalfLengthZ        , // dz,  L/2
                          alfCry,                     //double aAngleAD            , // alfa1
                          aNom - aUnd - ANom + AUnd,  //double aCoord15X           , // x15
                          hNom - hUnd - HNom + HUnd   //double aCoord15Y             // y15
       );
  
       const DDName cryDDName(cryName() + sType);
       const DDSolid crySolid(mytrap(cryDDName.name(), trapCry));
       const DDLogicalPart cryLog(cryDDName, cryMat(), crySolid);
  
       //++++++++++++++++++++++++++++++++++  APD ++++++++++++++++++++++++++++++++++
  
       const DDName apdDDName(apdName().name() + sType);
  
       const Trap trapAPD(apdSide() / 2.,   //double aHalfLengthXNegZLoY , // bl1, A/2
                          apdSide() / 2.,   //double aHalfLengthXPosZLoY , // bl2, a/2
                          apdSide() / 2.,   //double aHalfLengthXPosZHiY , // tl2, b/2
                          apdSide() / 2.,   //double aHalfLengthYNegZ    , // h1,  H/2
                          apdSide() / 2.,   //double aHalfLengthYPosZ    , // h2,  h/2
                          apdThick() / 2.,  // dz,  L/2
                          90 * deg,         //double aAngleAD            , // alfa1
                          0,                //double aCoord15X           , // x15
                          0                 //double aCoord15Y             // y15
       );
  
       //     DDSolid apdSolid ( DDSolidFactory::box( apdDDName,
       //                         apdSide()/2.,
       //                         apdSide()/2.,
       //                         apdThick()/2.   ) ) ;
       const DDSolid apdSolid(mytrap(apdDDName.name(), trapAPD));
       const DDLogicalPart apdLog(apdDDName, apdMat(), apdSolid);
  
       unsigned int copyAPD(0);
       //++++++++++++++++++++++++++++++++++ END APD ++++++++++++++++++++++++++++++++++
  
       const double delta(atan((HNom - hNom) / LNom));
       //unused   const double cosdelta  ( cos( delta ) ) ;
       const double sindelta(sin(delta));
  
       const double gamma(atan((ANom - aNom) / LNom));
       //unused   const double cosgamma  ( cos( gamma ) ) ;
       const double singamma(sin(gamma));
  
       const double beta(atan((BNom - bNom) / LNom));
       //unused   const double cosbeta   ( cos( beta ) ) ;
       const double sinbeta(sin(beta));
  
       // Now clearance trap
       const double alfClr(90 * deg + atan((bNom - aNom) / (hNom + sClr)));
  
       const Trap trapClr((ANom + sClr + rClr * singamma) / 2.,  //double aHalfLengthXNegZLoY , // bl1, A/2
                          (aNom + sClr - fClr * singamma) / 2.,  //double aHalfLengthXPosZLoY , // bl2, a/2
                          (bNom + sClr - fClr * sinbeta) / 2.,   //double aHalfLengthXPosZHiY , // tl2, b/2
                          (HNom + sClr + rClr * sindelta) / 2.,  //double aHalfLengthYNegZ    , // h1,  H/2
                          (hNom + sClr - fClr * sindelta) / 2.,  //double aHalfLengthYPosZ    , // h2,  h/2
                          (LNom + fClr + rClr) / 2.,             // dz,  L/2
                          alfClr,                                //double aAngleAD            , // alfa1
                          aNom - ANom,                           //double aCoord15X           , // x15
                          hNom - HNom                            //double aCoord15Y             // y15
       );
  
       const DDName clrDDName(clrName() + sType);
       const DDSolid clrSolid(mytrap(clrDDName.name(), trapClr));
       const DDLogicalPart clrLog(clrDDName, clrMat(), clrSolid);
  
       // Now wrap trap
  
       const double alfWrap(90 * deg + atan((bNom - aNom) / (hNom + sClr + 2 * sWrap)));
  
       const Trap trapWrap((trapClr.A() + 2 * sWrap + rWrap * singamma) / 2,  // bl1, A/2
                           (trapClr.a() + 2 * sWrap - fWrap * singamma) / 2,  // bl2, a/2
                           (trapClr.b() + 2 * sWrap - fWrap * sinbeta) / 2,   // tl2, b/2
                           (trapClr.H() + 2 * sWrap + rWrap * sindelta) / 2,  // h1,  H/2
                           (trapClr.h() + 2 * sWrap - fWrap * sindelta) / 2,  // h2,  h/2
                           (trapClr.L() + fWrap + rWrap) / 2.,                // dz,  L/2
                           alfWrap,                                           //double aAngleAD            , // alfa1
                           aNom - ANom - (cryType > 9 ? 0 : 0.020 * mm),
                           hNom - HNom  //double aCoord15Y             // y15
       );
  
       const DDName wrapDDName(wrapName() + sType);
       const DDSolid wrapSolid(mytrap(wrapDDName.name(), trapWrap));
       const DDLogicalPart wrapLog(wrapDDName, wrapMat(), wrapSolid);
  
       // Now wall trap
  
       const double alfWall(90 * deg + atan((bNom - aNom) / (hNom + sClr + 2 * sWrap + 2 * sWall)));
  
       const Trap trapWall((trapWrap.A() + 2 * sWall + rWall * singamma) / 2,  // A/2
                           (trapWrap.a() + 2 * sWall - fWall * singamma) / 2,  // a/2
                           (trapWrap.b() + 2 * sWall - fWall * sinbeta) / 2,   // b/2
                           (trapWrap.H() + 2 * sWall + rWall * sindelta) / 2,  // H/2
                           (trapWrap.h() + 2 * sWall - fWall * sindelta) / 2,  // h/2
                           (trapWrap.L() + fWall + rWall) / 2.,                // L/2
                           alfWall,                                            // alfa1
                           aNom - ANom - (cryType < 10 ? 0.150 * mm : 0.100 * mm),
                           hNom - HNom  // y15
       );
  
       const DDName wallDDName(wallName() + sType);
       const DDSolid wallSolid(mytrap(wallDDName.name(), trapWall));
       const DDLogicalPart wallLog(wallDDName, wallMat(), wallSolid);
  
       /*     std::cout << "Traps:\n a: " 
         << trapCry.a() << ", " 
         << trapClr.a() << ", " 
         << trapWrap.a() << ", " 
         << trapWall.a() << "\n b: " 
         << trapCry.b() << ", " 
         << trapClr.b() << ", " 
         << trapWrap.b() << ", " 
         << trapWall.b() << "\n A: " 
         << trapCry.A() << ", " 
         << trapClr.A() << ", " 
         << trapWrap.A() << ", " 
         << trapWall.A() << "\n B: " 
         << trapCry.B() << ", " 
         << trapClr.B() << ", " 
         << trapWrap.B() << ", " 
         << trapWall.B() << "\n h: " 
         << trapCry.h() << ", " 
         << trapClr.h() << ", " 
         << trapWrap.h() << ", " 
         << trapWall.h() << "\n H: " 
         << trapCry.H() << ", " 
         << trapClr.H() << ", " 
         << trapWrap.H() << ", " 
         << trapWall.H() << "\n a1: " 
         << trapCry.a1()/deg << ", " 
         << trapClr.a1()/deg << ", " 
         << trapWrap.a1()/deg << ", " 
         << trapWall.a1()/deg << "\n a4: " 
         << trapCry.a4()/deg << ", " 
         << trapClr.a4()/deg << ", " 
         << trapWrap.a4()/deg << ", " 
         << trapWall.a4()/deg << "\n x15: " 
         << trapCry.x15() << ", " 
         << trapClr.x15() << ", " 
         << trapWrap.x15() << ", " 
         << trapWall.x15() << "\n y15: " 
         << trapCry.y15() << ", " 
         << trapClr.y15() << ", " 
         << trapWrap.y15() << ", " 
         << trapWall.y15()
         << std::endl ;
 */
       // Now for placement of cry within clr
       const Vec3 cryToClr(0, 0, (rClr - fClr) / 2);
  
       cpv.position(cryLog,
                    clrLog,
                    copyOne,
                    DDTranslation(0, 0, (rClr - fClr) / 2),  //SAME as cryToClr above.
                    DDRotation());
  
       if (0 != apdHere()) {
         cpv.position(
             apdLog,
             clrLog,
             ++copyAPD,
             DDTranslation(
                 +trapCry.bl1() - apdX1(), +trapCry.h1() - apdZ(), -trapCry.dz() - apdThick() / 2. + (rClr - fClr) / 2.),
             DDRotation());
         cpv.position(
             apdLog,
             clrLog,
             ++copyAPD,
             DDTranslation(
                 +trapCry.bl1() - apdX2(), +trapCry.h1() - apdZ(), -trapCry.dz() - apdThick() / 2. + (rClr - fClr) / 2.),
             DDRotation());
       }
  
       const Vec3 clrToWrap(0, 0, (rWrap - fWrap) / 2);
  
       cpv.position(clrLog,
                    wrapLog,
                    copyOne,
                    DDTranslation(0, 0, (rWrap - fWrap) / 2),  //SAME as cryToWrap
                    DDRotation());
  
       // Now for placement of clr within wall
       const Vec3 wrapToWall1(0, 0, (rWall - fWall) / 2);
       const Vec3 wrapToWall(Vec3((cryType > 9 ? 0 : 0.005 * mm), 0, 0) + wrapToWall1);
  
       cpv.position(wrapLog,
                    wallLog,
                    copyOne,
                    DDTranslation(Vec3((cryType > 9 ? 0 : 0.005 * mm), 0, 0) + wrapToWall1),  //SAME as wrapToWall
                    DDRotation());
  
       const Trap::VertexList vWall(trapWall.vertexList());
       const Trap::VertexList vCry(trapCry.vertexList());
  
       const double sidePrime((trapWall.a() - trapCry.a()) / 2);
       const double frontPrime(fWall + fWrap + fClr + LUnd / 2);
  
       // define web plates with clearance ===========================================
  
       if (1 == cryType)  // first web plate: inside clearance volume
       {
         web(0,
             trapWall.b(),
             trapWall.B(),
             trapWall.L(),
             theta,
             vHAW[4] + Pt3D(0, hawYOffCry(), 0),
             hawRLog,
             zee,
             sidePrime,
             frontPrime,
             delta,
             cpv);
         zee += vecGapAlvEta()[0];
       }
  
       for (unsigned int etaAlv(1); etaAlv <= nCryPerAlvEta(); ++etaAlv) {
         LogDebug("EcalGeom") << "theta=" << theta / deg << ", sidePrime=" << sidePrime << ", frontPrime=" << frontPrime
                              << ",  zeta=" << zeta << ", delta=" << delta << ",  zee=" << zee;
  
         zee += 0.075 * mm + (side * cos(zeta) + trapWall.h() - sidePrime) / sin(theta);
  
         LogDebug("EcalGeom") << "New zee=" << zee;
  
         // make transform for placing enclosed crystal
  
         const Pt3D trap2(vCry[2] + cryToClr + clrToWrap + wrapToWall);
  
         const Pt3D trap3(trap2 + Pt3D(0, -trapCry.h(), 0));
         const Pt3D trap1(trap3 + Pt3D(-trapCry.a(), 0, 0));
  
         const Pt3D wedge3(vHAW[4] + Pt3D(sidePrime, hawYOffCry(), zee));
         const Pt3D wedge2(wedge3 + Pt3D(0, trapCry.h() * cos(theta), -trapCry.h() * sin(theta)));
         const Pt3D wedge1(wedge3 + Pt3D(trapCry.a(), 0, 0));
  
         const Tf3D tForm1(trap1, trap2, trap3, wedge1, wedge2, wedge3);
  
         const double xx(0.050 * mm);
  
         const Tf3D tForm(HepGeom::Translate3D(xx, 0, 0) * tForm1);
  
         cpv.position(wallLog,
                      hawRLog,
                      etaAlv,
                      DDTranslation(tForm.getTranslation().x(), tForm.getTranslation().y(), tForm.getTranslation().z()),
                      myrot(wallLog.name().name() + "_" + std::to_string(etaAlv), tForm.getRotation()));
  
         theta -= delta;
         side = sidePrime;
         zeta = delta;
       }
       if (5 == cryType || 9 == cryType || 13 == cryType || 17 == cryType)  // web plates
       {
         const unsigned int webIndex(cryType / 4);
         zee += 0.5 * vecGapAlvEta()[cryType] / sin(theta);
         web(webIndex,
             trapWall.a(),
             trapWall.A(),
             trapWall.L(),
             theta,
             vHAW[4] + Pt3D(0, hawYOffCry(), 0),
             hawRLog,
             zee,
             sidePrime,
             frontPrime,
             delta,
             cpv);
         zee += 0.5 * vecGapAlvEta()[cryType] / sin(theta);
       } else {
         if (17 != cryType)
           zee += vecGapAlvEta()[cryType] / sin(theta);
       }
     }
     // END   filling Wedge with crystal plus supports --------------------------
  
     //------------------------------------------------------------------------
     //------------------------------------------------------------------------
     //------------------------------------------------------------------------
     //------------------------------------------------------------------------
     //**************** Material at outer radius of supermodule ***************
     //------------------------------------------------------------------------
     //------------------------------------------------------------------------
     //------------------------------------------------------------------------
     //------------------------------------------------------------------------
  
     if (0 != backHere()) {
  
       const DDTranslation outtra(backXOff() + backSideHeight() / 2, backYOff(), backSideLength() / 2);
  
       const double realBPthick(backPlateThick() + backPlate2Thick());
  
       DDSolid backPlateSolid(
           DDSolidFactory::box(backPlateName(), backPlateWidth() / 2., realBPthick / 2., backPlateLength() / 2.));
       const std::vector<double>& backPlateParms(backPlateSolid.parameters());
       const DDLogicalPart backPlateLog(backPlateName(), backPlateMat(), backPlateSolid);
  
       const DDTranslation backPlateTra(
           backSideHeight() / 2 + backPlateParms[1], 0 * mm, backPlateParms[2] - backSideLength() / 2);
  
       DDSolid backPlate2Solid(
           DDSolidFactory::box(backPlate2Name(), backPlateWidth() / 2., backPlate2Thick() / 2., backPlateLength() / 2.));
  
       const DDLogicalPart backPlate2Log(backPlate2Name(), backPlate2Mat(), backPlate2Solid);
  
       const DDTranslation backPlate2Tra(0, -backPlateParms[1] + backPlate2Thick() / 2., 0);
       if (0 != backPlateHere()) {
         cpv.position(backPlate2Log, backPlateName(), copyOne, backPlate2Tra, DDRotation());
  
         cpv.position(backPlateLog,
                      spmName(),
                      copyOne,
                      outtra + backPlateTra,
                      myrot(backPlateName().name() + "Rot5", CLHEP::HepRotationZ(270 * deg)));
       }
  
  
       const Trap trapBS(backSideWidth() / 2.,   //double aHalfLengthXNegZLoY , // bl1, A/2
                         backSideWidth() / 2.,   //double aHalfLengthXPosZLoY , // bl2, a/2
                         backSideWidth() / 4.,   //double aHalfLengthXPosZHiY , // tl2, b/2
                         backSideHeight() / 2.,  //double aHalfLengthYNegZ    , // h1, H/2
                         backSideHeight() / 2.,  //double aHalfLengthYPosZ    , // h2, h/2
                         backSideLength() / 2.,  //double aHalfLengthZ        , // dz,  L/2
                         backSideAngle(),        //double aAngleAD            , // alfa1
                         0,                      //double aCoord15X           , // x15
                         0                       //double aCoord15Y             // y15
       );
  
       const DDSolid backSideSolid(mytrap(backSideName().name(), trapBS));
       const DDLogicalPart backSideLog(backSideName(), backSideMat(), backSideSolid);
  
       const DDTranslation backSideTra1(0 * mm, backPlateWidth() / 2 + backSideYOff1(), 1 * mm);
       if (0 != backSideHere()) {
         cpv.position(
             backSideLog,
             spmName(),
             copyOne,
             outtra + backSideTra1,
             myrot(backSideName().name() + "Rot8", CLHEP::HepRotationX(180 * deg) * CLHEP::HepRotationZ(90 * deg)));
  
         const DDTranslation backSideTra2(0 * mm, -backPlateWidth() / 2 + backSideYOff2(), 1 * mm);
         cpv.position(backSideLog,
                      spmName(),
                      copyTwo,
                      outtra + backSideTra2,
                      myrot(backSideName().name() + "Rot9", CLHEP::HepRotationZ(90 * deg)));
       }
  
       //=====================
       const double backCoolWidth(backCoolBarWidth() + 2. * backCoolTankWidth());
  
  
       const double manifCut(2 * mm);
  
       DDSolid mBManifSolid(DDSolidFactory::tubs(
           mBManifName(), backCoolWidth / 2. - manifCut, 0, mBManifOutDiam() / 2, 0 * deg, 360 * deg));
       const DDLogicalPart mBManifLog(mBManifName(), mBManifMat(), mBManifSolid);
  
       const DDName mBManifWaName(ddname(mBManifName().name() + "Wa"));
       DDSolid mBManifWaSolid(DDSolidFactory::tubs(
           mBManifWaName, backCoolWidth / 2. - manifCut, 0, mBManifInnDiam() / 2, 0 * deg, 360 * deg));
       const DDLogicalPart mBManifWaLog(mBManifWaName, backPipeWaterMat(), mBManifWaSolid);
       cpv.position(mBManifWaLog, mBManifName(), copyOne, DDTranslation(0, 0, 0), DDRotation());
  
       //=====================
  
       const double deltaY(-5 * mm);
  
       DDSolid grEdgeSlotSolid(
           DDSolidFactory::box(grEdgeSlotName(), grEdgeSlotHeight() / 2., grEdgeSlotWidth() / 2., grilleThick() / 2.));
       const DDLogicalPart grEdgeSlotLog(grEdgeSlotName(), grEdgeSlotMat(), grEdgeSlotSolid);
  
       unsigned int edgeSlotCopy(0);
       unsigned int midSlotCopy(0);
  
       DDLogicalPart grMidSlotLog[4];
  
       for (unsigned int iGr(0); iGr != vecGrilleHeight().size(); ++iGr) {
         DDName gName(ddname(grilleName() + std::to_string(iGr)));
         DDSolid grilleSolid(
             DDSolidFactory::box(gName, vecGrilleHeight()[iGr] / 2., backCoolWidth / 2., grilleThick() / 2.));
         const DDLogicalPart grilleLog(gName, grilleMat(), grilleSolid);
  
         const DDTranslation grilleTra(-realBPthick / 2 - vecGrilleHeight()[iGr] / 2,
                                       deltaY,
                                       vecGrilleZOff()[iGr] + grilleThick() / 2 - backSideLength() / 2);
         const DDTranslation gTra(outtra + backPlateTra + grilleTra);
  
         if (0 != grMidSlotHere() && 0 != iGr) {
           if (0 == (iGr - 1) % 2) {
             DDName mName(ddname(grMidSlotName() + std::to_string(iGr / 2)));
             DDSolid grMidSlotSolid(DDSolidFactory::box(
                 mName, vecGrMidSlotHeight()[(iGr - 1) / 2] / 2., grMidSlotWidth() / 2., grilleThick() / 2.));
             grMidSlotLog[(iGr - 1) / 2] = DDLogicalPart(mName, grMidSlotMat(), grMidSlotSolid);
           }
           cpv.position(grMidSlotLog[(iGr - 1) / 2],
                        gName,
                        ++midSlotCopy,
                        DDTranslation(
                            vecGrilleHeight()[iGr] / 2. - vecGrMidSlotHeight()[(iGr - 1) / 2] / 2., +grMidSlotXOff(), 0),
                        DDRotation());
           cpv.position(grMidSlotLog[(iGr - 1) / 2],
                        gName,
                        ++midSlotCopy,
                        DDTranslation(
                            vecGrilleHeight()[iGr] / 2. - vecGrMidSlotHeight()[(iGr - 1) / 2] / 2., -grMidSlotXOff(), 0),
                        DDRotation());
         }
  
         if (0 != grEdgeSlotHere() && 0 != iGr) {
           cpv.position(
               grEdgeSlotLog,
               gName,
               ++edgeSlotCopy,
               DDTranslation(
                   vecGrilleHeight()[iGr] / 2. - grEdgeSlotHeight() / 2., backCoolWidth / 2 - grEdgeSlotWidth() / 2., 0),
               DDRotation());
           cpv.position(grEdgeSlotLog,
                        gName,
                        ++edgeSlotCopy,
                        DDTranslation(vecGrilleHeight()[iGr] / 2. - grEdgeSlotHeight() / 2.,
                                      -backCoolWidth / 2 + grEdgeSlotWidth() / 2.,
                                      0),
                        DDRotation());
         }
         if (0 != grilleHere())
           cpv.position(grilleLog, spmName(), iGr, gTra, DDRotation());
  
         if ((0 != iGr % 2) && (0 != mBManifHere())) {
           cpv.position(mBManifLog,
                        spmName(),
                        iGr,
                        gTra - DDTranslation(-mBManifOutDiam() / 2. + vecGrilleHeight()[iGr] / 2.,
                                             manifCut,
                                             grilleThick() / 2. + 3 * mBManifOutDiam() / 2.),
                        myrot(mBManifName().name() + "R1", CLHEP::HepRotationX(90 * deg)));
           cpv.position(mBManifLog,
                        spmName(),
                        iGr - 1,
                        gTra - DDTranslation(-3 * mBManifOutDiam() / 2. + vecGrilleHeight()[iGr] / 2.,
                                             manifCut,
                                             grilleThick() / 2 + 3 * mBManifOutDiam() / 2.),
                        myrot(mBManifName().name() + "R2", CLHEP::HepRotationX(90 * deg)));
         }
       }
  
  
  
       DDSolid backCoolBarSolid(DDSolidFactory::box(
           backCoolBarName(), backCoolBarHeight() / 2., backCoolBarWidth() / 2., backCoolBarThick() / 2.));
       const DDLogicalPart backCoolBarLog(backCoolBarName(), backCoolBarMat(), backCoolBarSolid);
  
       DDSolid backCoolBarSSSolid(DDSolidFactory::box(
           backCoolBarSSName(), backCoolBarHeight() / 2., backCoolBarWidth() / 2., backCoolBarSSThick() / 2.));
       const DDLogicalPart backCoolBarSSLog(backCoolBarSSName(), backCoolBarSSMat(), backCoolBarSSSolid);
       const DDTranslation backCoolBarSSTra(0, 0, 0);
       cpv.position(backCoolBarSSLog, backCoolBarName(), copyOne, backCoolBarSSTra, DDRotation());
  
       DDSolid backCoolBarWaSolid(DDSolidFactory::box(
           backCoolBarWaName(), backCoolBarHeight() / 2., backCoolBarWidth() / 2., backCoolBarWaThick() / 2.));
       const DDLogicalPart backCoolBarWaLog(backCoolBarWaName(), backCoolBarWaMat(), backCoolBarWaSolid);
       const DDTranslation backCoolBarWaTra(0, 0, 0);
       cpv.position(backCoolBarWaLog, backCoolBarSSName(), copyOne, backCoolBarWaTra, DDRotation());
  
  
  
       double thickVFE(0);
       for (unsigned int iLyr(0); iLyr != vecBackVFELyrThick().size(); ++iLyr) {
         thickVFE += vecBackVFELyrThick()[iLyr];
       }
       DDSolid backVFESolid(
           DDSolidFactory::box(backVFEName(), backCoolBarHeight() / 2., backCoolBarWidth() / 2., thickVFE / 2.));
       const DDLogicalPart backVFELog(backVFEName(), backVFEMat(), backVFESolid);
       DDTranslation offTra(0, 0, -thickVFE / 2);
       for (unsigned int iLyr(0); iLyr != vecBackVFELyrThick().size(); ++iLyr) {
         DDSolid backVFELyrSolid(DDSolidFactory::box(ddname(vecBackVFELyrName()[iLyr]),
                                                     backCoolBarHeight() / 2.,
                                                     backCoolBarWidth() / 2.,
                                                     vecBackVFELyrThick()[iLyr] / 2.));
         const DDLogicalPart backVFELyrLog(
             ddname(vecBackVFELyrName()[iLyr]), ddmat(vecBackVFELyrMat()[iLyr]), backVFELyrSolid);
         const DDTranslation backVFELyrTra(0, 0, vecBackVFELyrThick()[iLyr] / 2);
         cpv.position(backVFELyrLog, backVFEName(), copyOne, backVFELyrTra + offTra, DDRotation());
         offTra += 2 * backVFELyrTra;
       }
  
  
  
       const double halfZCoolVFE(thickVFE + backCoolBarThick() / 2.);
       DDSolid backCoolVFESolid(
           DDSolidFactory::box(backCoolVFEName(), backCoolBarHeight() / 2., backCoolBarWidth() / 2., halfZCoolVFE));
       const DDLogicalPart backCoolVFELog(backCoolVFEName(), backCoolVFEMat(), backCoolVFESolid);
       if (0 != backCoolBarHere())
         cpv.position(backCoolBarLog, backCoolVFEName(), copyOne, DDTranslation(), DDRotation());
       if (0 != backCoolVFEHere())
         cpv.position(backVFELog,
                      backCoolVFEName(),
                      copyOne,
                      DDTranslation(0, 0, backCoolBarThick() / 2. + thickVFE / 2.),
                      DDRotation());
       cpv.position(backVFELog,
                    backCoolVFEName(),
                    copyTwo,
                    DDTranslation(0, 0, -backCoolBarThick() / 2. - thickVFE / 2.),
                    myrot(backVFEName().name() + "Flip", CLHEP::HepRotationX(180 * deg)));
  
  
       unsigned int iCVFECopy(1);
       unsigned int iSep(0);
       unsigned int iNSec(0);
       const unsigned int nMisc(vecBackMiscThick().size() / 4);
       for (unsigned int iMod(0); iMod != 4; ++iMod) {
         const double pipeLength(vecGrilleZOff()[2 * iMod + 1] - vecGrilleZOff()[2 * iMod] - grilleThick() - 3 * mm);
  
         const double pipeZPos(vecGrilleZOff()[2 * iMod + 1] - pipeLength / 2 - 1.5 * mm);
  
         // accumulate total height of parent volume
  
         double backCoolHeight(backCoolBarHeight() + mBCoolTubeOutDiam());
         for (unsigned int iMisc(0); iMisc != nMisc; ++iMisc) {
           backCoolHeight += vecBackMiscThick()[iMod * nMisc + iMisc];
         }
         double bottomThick(mBCoolTubeOutDiam());
         for (unsigned int iMB(0); iMB != vecMBLyrThick().size(); ++iMB) {
           backCoolHeight += vecMBLyrThick()[iMB];
           bottomThick += vecMBLyrThick()[iMB];
         }
  
         DDName backCName(ddname(vecBackCoolName()[iMod]));
         const double halfZBCool((pipeLength - 2 * mBManifOutDiam() - grilleZSpace()) / 2);
         DDSolid backCoolSolid(DDSolidFactory::box(backCName, backCoolHeight / 2., backCoolWidth / 2., halfZBCool));
         const DDLogicalPart backCoolLog(backCName, spmMat(), backCoolSolid);
  
         const DDTranslation bCoolTra(
             -realBPthick / 2 + backCoolHeight / 2 - vecGrilleHeight()[2 * iMod],
             deltaY,
             vecGrilleZOff()[2 * iMod] + grilleThick() + grilleZSpace() + halfZBCool - backSideLength() / 2);
         if (0 != backCoolHere())
           cpv.position(backCoolLog, spmName(), iMod + 1, outtra + backPlateTra + bCoolTra, DDRotation());
  
         //===
         const double backCoolTankHeight(backCoolBarHeight());  // - backBracketHeight() ) ;
  
         const double halfZTank(halfZBCool - 5 * cm);
  
         DDName bTankName(ddname(backCoolTankName() + std::to_string(iMod + 1)));
         DDSolid backCoolTankSolid(
             DDSolidFactory::box(bTankName, backCoolTankHeight / 2., backCoolTankWidth() / 2., halfZTank));
         const DDLogicalPart backCoolTankLog(bTankName, backCoolTankMat(), backCoolTankSolid);
         if (0 != backCoolTankHere())
           cpv.position(backCoolTankLog,
                        backCName,
                        copyOne,
                        DDTranslation(-backCoolHeight / 2 + backCoolTankHeight / 2. + bottomThick,
                                      backCoolBarWidth() / 2. + backCoolTankWidth() / 2.,
                                      0),
                        DDRotation());
  
         DDName bTankWaName(ddname(backCoolTankWaName() + std::to_string(iMod + 1)));
         DDSolid backCoolTankWaSolid(DDSolidFactory::box(bTankWaName,
                                                         backCoolTankHeight / 2. - backCoolTankThick() / 2.,
                                                         backCoolTankWaWidth() / 2.,
                                                         halfZTank - backCoolTankThick() / 2.));
         const DDLogicalPart backCoolTankWaLog(bTankWaName, backCoolTankWaMat(), backCoolTankWaSolid);
         cpv.position(backCoolTankWaLog, bTankName, copyOne, DDTranslation(0, 0, 0), DDRotation());
  
         DDName bBracketName(ddname(backBracketName() + std::to_string(iMod + 1)));
         DDSolid backBracketSolid(
             DDSolidFactory::box(bBracketName, backBracketHeight() / 2., backCoolTankWidth() / 2., halfZTank));
         const DDLogicalPart backBracketLog(bBracketName, backBracketMat(), backBracketSolid);
         if (0 != backCoolTankHere())
           cpv.position(backBracketLog,
                        backCName,
                        copyOne,
                        DDTranslation(backCoolBarHeight() - backCoolHeight / 2. - backBracketHeight() / 2. + bottomThick,
                                      -backCoolBarWidth() / 2. - backCoolTankWidth() / 2.,
                                      0),
                        DDRotation());
  
         /*   cpv.position( backBracketLog,
         backCName, 
         copyTwo, 
         DDTranslation( backCoolBarHeight() - backCoolHeight/2. - backBracketHeight()/2.,
                    backCoolBarWidth()/2. + backCoolTankWidth()/2., 0),
                    DDRotation() ) ;*/
  
         //===
  
         DDTranslation bSumTra(backCoolBarHeight() - backCoolHeight / 2. + bottomThick, 0, 0);
         for (unsigned int j(0); j != nMisc; ++j)  // loop over miscellaneous layers
         {
           const DDName bName(ddname(vecBackMiscName()[iMod * nMisc + j]));
  
           DDSolid bSolid(DDSolidFactory::box(bName,
                                              vecBackMiscThick()[iMod * nMisc + j] / 2,
                                              backCoolBarWidth() / 2. + backCoolTankWidth(),
                                              halfZBCool));
  
           const DDLogicalPart bLog(bName, ddmat(vecBackMiscMat()[iMod * nMisc + j]), bSolid);
  
           const DDTranslation bTra(vecBackMiscThick()[iMod * nMisc + j] / 2, 0 * mm, 0 * mm);
  
           if (0 != backMiscHere())
             cpv.position(bLog, backCName, copyOne, bSumTra + bTra, DDRotation());
  
           bSumTra += 2 * bTra;
         }
  
         const double bHalfWidth(backCoolBarWidth() / 2. + backCoolTankWidth());
  
         if (0 != mBLyrHere()) {
           DDTranslation mTra(-backCoolHeight / 2. + mBCoolTubeOutDiam(), 0, 0);
           for (unsigned int j(0); j != vecMBLyrThick().size(); ++j)  // loop over MB layers
           {
             const DDName mName(ddname(vecMBLyrName()[j] + "_" + std::to_string(iMod + 1)));
  
             DDSolid mSolid(DDSolidFactory::box(mName, vecMBLyrThick()[j] / 2, bHalfWidth, halfZBCool));
  
             const DDLogicalPart mLog(mName, ddmat(vecMBLyrMat()[j]), mSolid);
  
             mTra += DDTranslation(vecMBLyrThick()[j] / 2.0, 0 * mm, 0 * mm);
             cpv.position(mLog, backCName, copyOne, mTra, DDRotation());
             mTra += DDTranslation(vecMBLyrThick()[j] / 2.0, 0 * mm, 0 * mm);
           }
         }
  
         if (0 != mBCoolTubeHere()) {
           const DDName mBName(ddname(mBCoolTubeName() + "_" + std::to_string(iMod + 1)));
  
           DDSolid mBCoolTubeSolid(
               DDSolidFactory::tubs(mBName, halfZBCool, 0, mBCoolTubeOutDiam() / 2, 0 * deg, 360 * deg));
           const DDLogicalPart mBLog(mBName, mBCoolTubeMat(), mBCoolTubeSolid);
  
           const DDName mBWaName(ddname(mBCoolTubeName() + "Wa_" + std::to_string(iMod + 1)));
           DDSolid mBCoolTubeWaSolid(
               DDSolidFactory::tubs(mBWaName, halfZBCool, 0, mBCoolTubeInnDiam() / 2, 0 * deg, 360 * deg));
           const DDLogicalPart mBWaLog(mBWaName, backPipeWaterMat(), mBCoolTubeWaSolid);
           cpv.position(mBWaLog, mBName, copyOne, DDTranslation(0, 0, 0), DDRotation());
  
           for (unsigned int j(0); j != mBCoolTubeNum(); ++j)  // loop over all MB cooling circuits
           {
             cpv.position(
                 mBLog,
                 backCName,
                 2 * j + 1,
                 DDTranslation(
                     -backCoolHeight / 2.0 + mBCoolTubeOutDiam() / 2., -bHalfWidth + (j + 1) * bHalfWidth / 5, 0),
                 DDRotation());
           }
         }
  
         if (0 != backPipeHere() && 0 != iMod) {
           DDName bPipeName(ddname(backPipeName() + "_" + std::to_string(iMod + 1)));
           DDName bInnerName(ddname(backPipeName() + "_H2O_" + std::to_string(iMod + 1)));
  
           DDSolid backPipeSolid(
               DDSolidFactory::tubs(bPipeName, pipeLength / 2, 0 * mm, vecBackPipeDiam()[iMod] / 2, 0 * deg, 360 * deg));
  
           DDSolid backInnerSolid(DDSolidFactory::tubs(bInnerName,
                                                       pipeLength / 2,
                                                       0 * mm,
                                                       vecBackPipeDiam()[iMod] / 2 - vecBackPipeThick()[iMod],
                                                       0 * deg,
                                                       360 * deg));
  
           const DDLogicalPart backPipeLog(bPipeName, backPipeMat(), backPipeSolid);
  
           const DDLogicalPart backInnerLog(bInnerName, backPipeWaterMat(), backInnerSolid);
  
           const DDTranslation bPipeTra1(
               backXOff() + backSideHeight() - 0.7 * vecBackPipeDiam()[iMod],
               backYOff() + backPlateWidth() / 2 - backSideWidth() - 0.7 * vecBackPipeDiam()[iMod],
               pipeZPos);
  
           cpv.position(backPipeLog, spmName(), copyOne, bPipeTra1, DDRotation());
  
           const DDTranslation bPipeTra2(bPipeTra1.x(),
                                         backYOff() - backPlateWidth() / 2 + backSideWidth() + vecBackPipeDiam()[iMod],
                                         bPipeTra1.z());
  
           cpv.position(backPipeLog, spmName(), copyTwo, bPipeTra2, DDRotation());
  
           cpv.position(backInnerLog, bPipeName, copyOne, DDTranslation(), DDRotation());
         }
  
         //=================================================
  
         if (0 != dryAirTubeHere()) {
           DDName dryAirTubName(ddname(dryAirTubeName() + std::to_string(iMod + 1)));
  
           DDSolid dryAirTubeSolid(DDSolidFactory::tubs(
               dryAirTubName, pipeLength / 2, dryAirTubeInnDiam() / 2, dryAirTubeOutDiam() / 2, 0 * deg, 360 * deg));
  
           const DDLogicalPart dryAirTubeLog(dryAirTubName, dryAirTubeMat(), dryAirTubeSolid);
  
           const DDTranslation dryAirTubeTra1(
               backXOff() + backSideHeight() - 0.7 * dryAirTubeOutDiam() - vecBackPipeDiam()[iMod],
               backYOff() + backPlateWidth() / 2 - backSideWidth() - 1.2 * dryAirTubeOutDiam(),
               pipeZPos);
  
           cpv.position(dryAirTubeLog, spmName(), copyOne, dryAirTubeTra1, DDRotation());
  
           const DDTranslation dryAirTubeTra2(
               dryAirTubeTra1.x(),
               backYOff() - backPlateWidth() / 2 + backSideWidth() + 0.7 * dryAirTubeOutDiam(),
               dryAirTubeTra1.z());
  
           cpv.position(dryAirTubeLog, spmName(), copyTwo, dryAirTubeTra2, DDRotation());
         }
         //++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  
  
         DDTranslation cTra(backCoolBarHeight() / 2. - backCoolHeight / 2. + bottomThick, 0, -halfZTank + halfZCoolVFE);
         const unsigned int numSec(static_cast<unsigned int>(vecBackCoolNSec()[iMod]));
         for (unsigned int jSec(0); jSec != numSec; ++jSec) {
           const unsigned int nMax(static_cast<unsigned int>(vecBackCoolNPerSec()[iNSec++]));
           for (unsigned int iBar(0); iBar != nMax; ++iBar) {
             cpv.position(backCoolVFELog, backCName, iCVFECopy++, cTra, DDRotation());
             cTra += DDTranslation(0, 0, backCBStdSep());
           }
           cTra -= DDTranslation(0, 0, backCBStdSep());  // backspace to previous
           if (jSec != numSec - 1)
             cTra += DDTranslation(0, 0, vecBackCoolSecSep()[iSep++]);  // now take atypical step
         }
       }
  
  
  
       double patchHeight(0);
       for (unsigned int iPatch(0); iPatch != vecPatchPanelThick().size(); ++iPatch) {
         patchHeight += vecPatchPanelThick()[iPatch];
       }
  
       DDSolid patchSolid(DDSolidFactory::box(patchPanelName(),
                                              patchHeight / 2.,
                                              backCoolBarWidth() / 2.,
                                              (vecSpmZPts().back() - vecGrilleZOff().back() - grilleThick()) / 2));
  
       const std::vector<double>& patchParms(patchSolid.parameters());
  
       const DDLogicalPart patchLog(patchPanelName(), spmMat(), patchSolid);
  
       const DDTranslation patchTra(backXOff() + 4 * mm, 0 * mm, vecGrilleZOff().back() + grilleThick() + patchParms[2]);
       if (0 != patchPanelHere())
         cpv.position(patchLog, spmName(), copyOne, patchTra, DDRotation());
  
       DDTranslation pTra(-patchParms[0], 0, 0);
  
       for (unsigned int j(0); j != vecPatchPanelNames().size(); ++j) {
         const DDName pName(ddname(vecPatchPanelNames()[j]));
  
         DDSolid pSolid(DDSolidFactory::box(pName, vecPatchPanelThick()[j] / 2., patchParms[1], patchParms[2]));
  
         const DDLogicalPart pLog(pName, ddmat(vecPatchPanelMat()[j]), pSolid);
  
         pTra += DDTranslation(vecPatchPanelThick()[j] / 2, 0 * mm, 0 * mm);
  
         cpv.position(pLog, patchPanelName(), copyOne, pTra, DDRotation());
  
         pTra += DDTranslation(vecPatchPanelThick()[j] / 2, 0 * mm, 0 * mm);
       }
  
  
       if (0 != pincerRodHere()) {
         // Make hierarchy of rods, envelopes, blocks, shims, and cutouts
  
         DDSolid rodSolid(
             DDSolidFactory::box(pincerRodName(), pincerEnvWidth() / 2., pincerEnvHeight() / 2., ilyLength / 2));
         const DDLogicalPart rodLog(pincerRodName(), pincerRodMat(), rodSolid);
  
         DDSolid envSolid(
             DDSolidFactory::box(pincerEnvName(), pincerEnvWidth() / 2., pincerEnvHeight() / 2., pincerEnvLength() / 2));
         const DDLogicalPart envLog(pincerEnvName(), pincerEnvMat(), envSolid);
         const std::vector<double>& envParms(envSolid.parameters());
  
         DDSolid blkSolid(
             DDSolidFactory::box(pincerBlkName(), pincerEnvWidth() / 2., pincerEnvHeight() / 2., pincerBlkLength() / 2));
         const DDLogicalPart blkLog(pincerBlkName(), pincerBlkMat(), blkSolid);
         const std::vector<double>& blkParms(blkSolid.parameters());
         cpv.position(blkLog,
                      pincerEnvName(),
                      copyOne,
                      DDTranslation(0, 0, pincerEnvLength() / 2 - pincerBlkLength() / 2),
                      DDRotation());
  
         DDSolid cutSolid(
             DDSolidFactory::box(pincerCutName(), pincerCutWidth() / 2., pincerCutHeight() / 2., pincerBlkLength() / 2));
         const DDLogicalPart cutLog(pincerCutName(), pincerCutMat(), cutSolid);
         const std::vector<double>& cutParms(cutSolid.parameters());
         cpv.position(
             cutLog,
             pincerBlkName(),
             copyOne,
             DDTranslation(
                 +blkParms[0] - cutParms[0] - pincerShim1Width() + pincerShim2Width(), -blkParms[1] + cutParms[1], 0),
             DDRotation());
  
         DDSolid shim2Solid(DDSolidFactory::box(
             pincerShim2Name(), pincerShim2Width() / 2., pincerShimHeight() / 2., pincerBlkLength() / 2));
         const DDLogicalPart shim2Log(pincerShim2Name(), pincerShimMat(), shim2Solid);
         const std::vector<double>& shim2Parms(shim2Solid.parameters());
         cpv.position(shim2Log,
                      pincerCutName(),
                      copyOne,
                      DDTranslation(+cutParms[0] - shim2Parms[0], -cutParms[1] + shim2Parms[1], 0),
                      DDRotation());
  
         DDSolid shim1Solid(DDSolidFactory::box(pincerShim1Name(),
                                                pincerShim1Width() / 2.,
                                                pincerShimHeight() / 2.,
                                                (pincerEnvLength() - pincerBlkLength()) / 2));
  
         const DDLogicalPart shim1Log(pincerShim1Name(), pincerShimMat(), shim1Solid);
         const std::vector<double>& shim1Parms(shim1Solid.parameters());
         cpv.position(
             shim1Log,
             pincerEnvName(),
             copyOne,
             DDTranslation(+envParms[0] - shim1Parms[0], -envParms[1] + shim1Parms[1], -envParms[2] + shim1Parms[2]),
             DDRotation());
  
         for (unsigned int iEnv(0); iEnv != vecPincerEnvZOff().size(); ++iEnv) {
           cpv.position(envLog,
                        pincerRodName(),
                        1 + iEnv,
                        DDTranslation(0, 0, -ilyLength / 2. + vecPincerEnvZOff()[iEnv] - pincerEnvLength() / 2.),
                        DDRotation());
         }
  
         // Place the rods
         //   const double radius ( fawRadOff() - pincerEnvHeight()/2 -1*mm ) ;
         const double radius(ilyRMin - pincerEnvHeight() / 2 - 1 * mm);
  
         const DDName xilyName(ddname(ilyName() + std::to_string(vecIlyMat().size() - 1)));
  
         for (unsigned int iRod(0); iRod != vecPincerRodAzimuth().size(); ++iRod) {
           const DDTranslation rodTra(
               radius * cos(vecPincerRodAzimuth()[iRod]), radius * sin(vecPincerRodAzimuth()[iRod]), 0);
  
           cpv.position(rodLog,
                        xilyName,
                        1 + iRod,
                        rodTra,
                        myrot(pincerRodName().name() + std::to_string(iRod),
                              CLHEP::HepRotationZ(90 * deg + vecPincerRodAzimuth()[iRod])));
         }
       }
     }
   }
  
   LogDebug("EcalGeom") << "******** DDEcalBarrelAlgo test: end it...";
 }

double DDEcalBarrelAlgo::ilyPTMWidth ( ) const

inline

Definition at line 190 of file DDEcalBarrelAlgo.cc.

190 { return m_IlyPTMWidth; }

References m_IlyPTMWidth.

Referenced by execute().

◆ initialize()

void DDEcalBarrelAlgo::initialize	(	const DDNumericArguments &	nArgs,
		const DDVectorArguments &	vArgs,
		const DDMapArguments &	mArgs,
		const DDStringArguments &	sArgs,
		const DDStringVectorArguments &	vsArgs
	)

override

Definition at line 1045 of file DDEcalBarrelAlgo.cc.

                                                                          {
   LogDebug("EcalGeom") << "DDEcalBarrelAlgo info: Initialize";
   m_idNameSpace = DDCurrentNamespace::ns();
   // TRICK!
   m_idNameSpace = parent().name().ns();
   // barrel parent volume
   m_BarName = sArgs["BarName"];
   m_BarMat = sArgs["BarMat"];
   m_vecBarZPts = vArgs["BarZPts"];
   m_vecBarRMin = vArgs["BarRMin"];
   m_vecBarRMax = vArgs["BarRMax"];
   m_vecBarTran = vArgs["BarTran"];
   m_vecBarRota = vArgs["BarRota"];
   m_vecBarRota2 = vArgs["BarRota2"];
   m_vecBarRota3 = vArgs["BarRota3"];
   m_BarPhiLo = nArgs["BarPhiLo"];
   m_BarPhiHi = nArgs["BarPhiHi"];
   m_BarHere = nArgs["BarHere"];
  
   m_SpmName = sArgs["SpmName"];
   m_SpmMat = sArgs["SpmMat"];
   m_vecSpmZPts = vArgs["SpmZPts"];
   m_vecSpmRMin = vArgs["SpmRMin"];
   m_vecSpmRMax = vArgs["SpmRMax"];
   m_vecSpmTran = vArgs["SpmTran"];
   m_vecSpmRota = vArgs["SpmRota"];
   m_vecSpmBTran = vArgs["SpmBTran"];
   m_vecSpmBRota = vArgs["SpmBRota"];
   m_SpmNPerHalf = static_cast<unsigned int>(nArgs["SpmNPerHalf"]);
   m_SpmLowPhi = nArgs["SpmLowPhi"];
   m_SpmDelPhi = nArgs["SpmDelPhi"];
   m_SpmPhiOff = nArgs["SpmPhiOff"];
   m_vecSpmHere = vArgs["SpmHere"];
   m_SpmCutName = sArgs["SpmCutName"];
   m_SpmCutThick = nArgs["SpmCutThick"];
   m_SpmCutShow = int(nArgs["SpmCutShow"]);
   m_vecSpmCutTM = vArgs["SpmCutTM"];
   m_vecSpmCutTP = vArgs["SpmCutTP"];
   m_SpmCutRM = nArgs["SpmCutRM"];
   m_SpmCutRP = nArgs["SpmCutRP"];
   m_SpmExpThick = nArgs["SpmExpThick"];
   m_SpmExpWide = nArgs["SpmExpWide"];
   m_SpmExpYOff = nArgs["SpmExpYOff"];
   m_SpmSideName = sArgs["SpmSideName"];
   m_SpmSideMat = sArgs["SpmSideMat"];
   m_SpmSideHigh = nArgs["SpmSideHigh"];
   m_SpmSideThick = nArgs["SpmSideThick"];
   m_SpmSideYOffM = nArgs["SpmSideYOffM"];
   m_SpmSideYOffP = nArgs["SpmSideYOffP"];
  
   m_NomCryDimAF = nArgs["NomCryDimAF"];
   m_NomCryDimLZ = nArgs["NomCryDimLZ"];
   m_vecNomCryDimBF = vArgs["NomCryDimBF"];
   m_vecNomCryDimCF = vArgs["NomCryDimCF"];
   m_vecNomCryDimAR = vArgs["NomCryDimAR"];
   m_vecNomCryDimBR = vArgs["NomCryDimBR"];
   m_vecNomCryDimCR = vArgs["NomCryDimCR"];
  
   m_UnderAF = nArgs["UnderAF"];
   m_UnderLZ = nArgs["UnderLZ"];
   m_UnderBF = nArgs["UnderBF"];
   m_UnderCF = nArgs["UnderCF"];
   m_UnderAR = nArgs["UnderAR"];
   m_UnderBR = nArgs["UnderBR"];
   m_UnderCR = nArgs["UnderCR"];
  
   m_WallThAlv = nArgs["WallThAlv"];
   m_WrapThAlv = nArgs["WrapThAlv"];
   m_ClrThAlv = nArgs["ClrThAlv"];
   m_vecGapAlvEta = vArgs["GapAlvEta"];
  
   m_WallFrAlv = nArgs["WallFrAlv"];
   m_WrapFrAlv = nArgs["WrapFrAlv"];
   m_ClrFrAlv = nArgs["ClrFrAlv"];
  
   m_WallReAlv = nArgs["WallReAlv"];
   m_WrapReAlv = nArgs["WrapReAlv"];
   m_ClrReAlv = nArgs["ClrReAlv"];
  
   m_NCryTypes = static_cast<unsigned int>(nArgs["NCryTypes"]);
   m_NCryPerAlvEta = static_cast<unsigned int>(nArgs["NCryPerAlvEta"]);
  
   m_CryName = sArgs["CryName"];
   m_ClrName = sArgs["ClrName"];
   m_WrapName = sArgs["WrapName"];
   m_WallName = sArgs["WallName"];
  
   m_CryMat = sArgs["CryMat"];
   m_ClrMat = sArgs["ClrMat"];
   m_WrapMat = sArgs["WrapMat"];
   m_WallMat = sArgs["WallMat"];
  
   m_APDName = sArgs["APDName"];
   m_APDHere = nArgs["APDHere"];
   m_APDMat = sArgs["APDMat"];
   m_APDSide = nArgs["APDSide"];
   m_APDThick = nArgs["APDThick"];
   m_APDZ = nArgs["APDZ"];
   m_APDX1 = nArgs["APDX1"];
   m_APDX2 = nArgs["APDX2"];
  
   m_WebHere = nArgs["WebHere"];
   m_WebPlName = sArgs["WebPlName"];
   m_WebClrName = sArgs["WebClrName"];
   m_WebPlMat = sArgs["WebPlMat"];
   m_WebClrMat = sArgs["WebClrMat"];
   m_vecWebPlTh = vArgs["WebPlTh"];
   m_vecWebClrTh = vArgs["WebClrTh"];
   m_vecWebLength = vArgs["WebLength"];
  
   m_IlyHere = nArgs["IlyHere"];
   m_IlyName = sArgs["IlyName"];
   m_IlyPhiLow = nArgs["IlyPhiLow"];
   m_IlyDelPhi = nArgs["IlyDelPhi"];
   m_vecIlyMat = vsArgs["IlyMat"];
   m_vecIlyThick = vArgs["IlyThick"];
  
   m_IlyPipeName = sArgs["IlyPipeName"];
   m_IlyPipeHere = nArgs["IlyPipeHere"];
   m_IlyPipeMat = sArgs["IlyPipeMat"];
   m_IlyPipeOD = nArgs["IlyPipeOD"];
   m_IlyPipeID = nArgs["IlyPipeID"];
   m_vecIlyPipeLength = vArgs["IlyPipeLength"];
   m_vecIlyPipeType = vArgs["IlyPipeType"];
   m_vecIlyPipePhi = vArgs["IlyPipePhi"];
   m_vecIlyPipeZ = vArgs["IlyPipeZ"];
  
   m_IlyPTMName = sArgs["IlyPTMName"];
   m_IlyPTMHere = nArgs["IlyPTMHere"];
   m_IlyPTMMat = sArgs["IlyPTMMat"];
   m_IlyPTMWidth = nArgs["IlyPTMWidth"];
   m_IlyPTMLength = nArgs["IlyPTMLength"];
   m_IlyPTMHeight = nArgs["IlyPTMHeight"];
   m_vecIlyPTMZ = vArgs["IlyPTMZ"];
   m_vecIlyPTMPhi = vArgs["IlyPTMPhi"];
  
   m_IlyFanOutName = sArgs["IlyFanOutName"];
   m_IlyFanOutHere = nArgs["IlyFanOutHere"];
   m_IlyFanOutMat = sArgs["IlyFanOutMat"];
   m_IlyFanOutWidth = nArgs["IlyFanOutWidth"];
   m_IlyFanOutLength = nArgs["IlyFanOutLength"];
   m_IlyFanOutHeight = nArgs["IlyFanOutHeight"];
   m_vecIlyFanOutZ = vArgs["IlyFanOutZ"];
   m_vecIlyFanOutPhi = vArgs["IlyFanOutPhi"];
   m_IlyDiffName = sArgs["IlyDiffName"];
   m_IlyDiffMat = sArgs["IlyDiffMat"];
   m_IlyDiffOff = nArgs["IlyDiffOff"];
   m_IlyDiffLength = nArgs["IlyDiffLength"];
   m_IlyBndlName = sArgs["IlyBndlName"];
   m_IlyBndlMat = sArgs["IlyBndlMat"];
   m_IlyBndlOff = nArgs["IlyBndlOff"];
   m_IlyBndlLength = nArgs["IlyBndlLength"];
   m_IlyFEMName = sArgs["IlyFEMName"];
   m_IlyFEMMat = sArgs["IlyFEMMat"];
   m_IlyFEMWidth = nArgs["IlyFEMWidth"];
   m_IlyFEMLength = nArgs["IlyFEMLength"];
   m_IlyFEMHeight = nArgs["IlyFEMHeight"];
   m_vecIlyFEMZ = vArgs["IlyFEMZ"];
   m_vecIlyFEMPhi = vArgs["IlyFEMPhi"];
  
   m_HawRName = sArgs["HawRName"];
   m_FawName = sArgs["FawName"];
   m_FawHere = nArgs["FawHere"];
   m_HawRHBIG = nArgs["HawRHBIG"];
   m_HawRhsml = nArgs["HawRhsml"];
   m_HawRCutY = nArgs["HawRCutY"];
   m_HawRCutZ = nArgs["HawRCutZ"];
   m_HawRCutDelY = nArgs["HawRCutDelY"];
   m_HawYOffCry = nArgs["HawYOffCry"];
  
   m_NFawPerSupm = static_cast<unsigned int>(nArgs["NFawPerSupm"]);
   m_FawPhiOff = nArgs["FawPhiOff"];
   m_FawDelPhi = nArgs["FawDelPhi"];
   m_FawPhiRot = nArgs["FawPhiRot"];
   m_FawRadOff = nArgs["FawRadOff"];
  
   m_GridHere = nArgs["GridHere"];
   m_GridName = sArgs["GridName"];
   m_GridMat = sArgs["GridMat"];
   m_GridThick = nArgs["GridThick"];
  
   m_BackHere = nArgs["BackHere"];
   m_BackXOff = nArgs["BackXOff"];
   m_BackYOff = nArgs["BackYOff"];
   m_BackSideName = sArgs["BackSideName"];
   m_BackSideHere = nArgs["BackSideHere"];
   m_BackSideLength = nArgs["BackSideLength"];
   m_BackSideHeight = nArgs["BackSideHeight"];
   m_BackSideWidth = nArgs["BackSideWidth"];
   m_BackSideYOff1 = nArgs["BackSideYOff1"];
   m_BackSideYOff2 = nArgs["BackSideYOff2"];
   m_BackSideAngle = nArgs["BackSideAngle"];
   m_BackSideMat = sArgs["BackSideMat"];
   m_BackPlateName = sArgs["BackPlateName"];
   m_BackPlateHere = nArgs["BackPlateHere"];
   m_BackPlateLength = nArgs["BackPlateLength"];
   m_BackPlateThick = nArgs["BackPlateThick"];
   m_BackPlateWidth = nArgs["BackPlateWidth"];
   m_BackPlateMat = sArgs["BackPlateMat"];
   m_BackPlate2Name = sArgs["BackPlate2Name"];
   m_BackPlate2Thick = nArgs["BackPlate2Thick"];
   m_BackPlate2Mat = sArgs["BackPlate2Mat"];
   m_GrilleName = sArgs["GrilleName"];
   m_GrilleHere = nArgs["GrilleHere"];
   m_GrilleThick = nArgs["GrilleThick"];
   m_GrilleWidth = nArgs["GrilleWidth"];
   m_GrilleZSpace = nArgs["GrilleZSpace"];
   m_GrilleMat = sArgs["GrilleMat"];
   m_vecGrilleHeight = vArgs["GrilleHeight"];
   m_vecGrilleZOff = vArgs["GrilleZOff"];
  
   m_GrEdgeSlotName = sArgs["GrEdgeSlotName"];
   m_GrEdgeSlotMat = sArgs["GrEdgeSlotMat"];
   m_GrEdgeSlotHere = nArgs["GrEdgeSlotHere"];
   m_GrEdgeSlotHeight = nArgs["GrEdgeSlotHeight"];
   m_GrEdgeSlotWidth = nArgs["GrEdgeSlotWidth"];
   m_GrMidSlotName = sArgs["GrMidSlotName"];
   m_GrMidSlotMat = sArgs["GrMidSlotMat"];
   m_GrMidSlotHere = nArgs["GrMidSlotHere"];
   m_GrMidSlotWidth = nArgs["GrMidSlotWidth"];
   m_GrMidSlotXOff = nArgs["GrMidSlotXOff"];
   m_vecGrMidSlotHeight = vArgs["GrMidSlotHeight"];
  
   m_BackPipeHere = nArgs["BackPipeHere"];
   m_BackPipeName = sArgs["BackPipeName"];
   m_vecBackPipeDiam = vArgs["BackPipeDiam"];
   m_vecBackPipeThick = vArgs["BackPipeThick"];
   m_BackPipeMat = sArgs["BackPipeMat"];
   m_BackPipeWaterMat = sArgs["BackPipeWaterMat"];
  
   m_BackCoolHere = nArgs["BackCoolHere"];
   m_vecBackCoolName = vsArgs["BackCoolName"];
   m_BackCoolBarHere = nArgs["BackCoolBarHere"];
   m_BackCoolBarWidth = nArgs["BackCoolBarWidth"];
   m_BackCoolBarHeight = nArgs["BackCoolBarHeight"];
   m_BackCoolMat = sArgs["BackCoolMat"];
   m_BackCoolBarName = sArgs["BackCoolBarName"];
   m_BackCoolBarThick = nArgs["BackCoolBarThick"];
   m_BackCoolBarMat = sArgs["BackCoolBarMat"];
   m_BackCoolBarSSName = sArgs["BackCoolBarSSName"];
   m_BackCoolBarSSThick = nArgs["BackCoolBarSSThick"];
   m_BackCoolBarSSMat = sArgs["BackCoolBarSSMat"];
   m_BackCoolBarWaName = sArgs["BackCoolBarWaName"];
   m_BackCoolBarWaThick = nArgs["BackCoolBarWaThick"];
   m_BackCoolBarWaMat = sArgs["BackCoolBarWaMat"];
   m_BackCoolVFEHere = nArgs["BackCoolVFEHere"];
   m_BackCoolVFEName = sArgs["BackCoolVFEName"];
   m_BackCoolVFEMat = sArgs["BackCoolVFEMat"];
   m_BackVFEName = sArgs["BackVFEName"];
   m_BackVFEMat = sArgs["BackVFEMat"];
   m_vecBackVFELyrThick = vArgs["BackVFELyrThick"];
   m_vecBackVFELyrName = vsArgs["BackVFELyrName"];
   m_vecBackVFELyrMat = vsArgs["BackVFELyrMat"];
   m_vecBackCoolNSec = vArgs["BackCoolNSec"];
   m_vecBackCoolSecSep = vArgs["BackCoolSecSep"];
   m_vecBackCoolNPerSec = vArgs["BackCoolNPerSec"];
   m_BackCBStdSep = nArgs["BackCBStdSep"];
  
   m_BackMiscHere = nArgs["BackMiscHere"];
   m_vecBackMiscThick = vArgs["BackMiscThick"];
   m_vecBackMiscName = vsArgs["BackMiscName"];
   m_vecBackMiscMat = vsArgs["BackMiscMat"];
   m_PatchPanelHere = nArgs["PatchPanelHere"];
   m_vecPatchPanelThick = vArgs["PatchPanelThick"];
   m_vecPatchPanelNames = vsArgs["PatchPanelNames"];
   m_vecPatchPanelMat = vsArgs["PatchPanelMat"];
   m_PatchPanelName = sArgs["PatchPanelName"];
  
   m_BackCoolTankHere = nArgs["BackCoolTankHere"];
   m_BackCoolTankName = sArgs["BackCoolTankName"];
   m_BackCoolTankWidth = nArgs["BackCoolTankWidth"];
   m_BackCoolTankThick = nArgs["BackCoolTankThick"];
   m_BackCoolTankMat = sArgs["BackCoolTankMat"];
   m_BackCoolTankWaName = sArgs["BackCoolTankWaName"];
   m_BackCoolTankWaWidth = nArgs["BackCoolTankWaWidth"];
   m_BackCoolTankWaMat = sArgs["BackCoolTankWaMat"];
   m_BackBracketName = sArgs["BackBracketName"];
   m_BackBracketHeight = nArgs["BackBracketHeight"];
   m_BackBracketMat = sArgs["BackBracketMat"];
  
   m_DryAirTubeHere = nArgs["DryAirTubeHere"];
   m_DryAirTubeName = sArgs["DryAirTubeName"];
   m_MBCoolTubeNum = static_cast<unsigned int>(nArgs["MBCoolTubeNum"]);
   m_DryAirTubeInnDiam = nArgs["DryAirTubeInnDiam"];
   m_DryAirTubeOutDiam = nArgs["DryAirTubeOutDiam"];
   m_DryAirTubeMat = sArgs["DryAirTubeMat"];
   m_MBCoolTubeHere = nArgs["MBCoolTubeHere"];
   m_MBCoolTubeName = sArgs["MBCoolTubeName"];
   m_MBCoolTubeInnDiam = nArgs["MBCoolTubeInnDiam"];
   m_MBCoolTubeOutDiam = nArgs["MBCoolTubeOutDiam"];
   m_MBCoolTubeMat = sArgs["MBCoolTubeMat"];
   m_MBManifHere = nArgs["MBManifHere"];
   m_MBManifName = sArgs["MBManifName"];
   m_MBManifInnDiam = nArgs["MBManifInnDiam"];
   m_MBManifOutDiam = nArgs["MBManifOutDiam"];
   m_MBManifMat = sArgs["MBManifMat"];
   m_MBLyrHere = nArgs["MBLyrHere"];
   m_vecMBLyrThick = vArgs["MBLyrThick"];
   m_vecMBLyrName = vsArgs["MBLyrName"];
   m_vecMBLyrMat = vsArgs["MBLyrMat"];
  
   m_PincerRodHere = nArgs["PincerRodHere"];
   m_PincerRodName = sArgs["PincerRodName"];
   m_PincerRodMat = sArgs["PincerRodMat"];
   m_vecPincerRodAzimuth = vArgs["PincerRodAzimuth"];
   m_PincerEnvName = sArgs["PincerEnvName"];
   m_PincerEnvMat = sArgs["PincerEnvMat"];
   m_PincerEnvWidth = nArgs["PincerEnvWidth"];
   m_PincerEnvHeight = nArgs["PincerEnvHeight"];
   m_PincerEnvLength = nArgs["PincerEnvLength"];
   m_vecPincerEnvZOff = vArgs["PincerEnvZOff"];
   m_PincerBlkName = sArgs["PincerBlkName"];
   m_PincerBlkMat = sArgs["PincerBlkMat"];
   m_PincerBlkLength = nArgs["PincerBlkLength"];
   m_PincerShim1Name = sArgs["PincerShim1Name"];
   m_PincerShimHeight = nArgs["PincerShimHeight"];
   m_PincerShim2Name = sArgs["PincerShim2Name"];
   m_PincerShimMat = sArgs["PincerShimMat"];
   m_PincerShim1Width = nArgs["PincerShim1Width"];
   m_PincerShim2Width = nArgs["PincerShim2Width"];
   m_PincerCutName = sArgs["PincerCutName"];
   m_PincerCutMat = sArgs["PincerCutMat"];
   m_PincerCutWidth = nArgs["PincerCutWidth"];
   m_PincerCutHeight = nArgs["PincerCutHeight"];
  
   LogDebug("EcalGeom") << "DDEcalBarrelAlgo info: end initialize";
 }

Referenced by execute().

◆ myrot()

DDRotation DDEcalBarrelAlgo::myrot	(	const std::string &	s,
		const CLHEP::HepRotation &	r
	)		const

Create a DDRotation from a string converted to DDName and CLHEP::HepRotation converted to DDRotationMatrix. – Michael Case.

Definition at line 2904 of file DDEcalBarrelAlgo.cc.

                                                                                       {
   return DDrot(
       ddname(m_idNameSpace + ":" + s),
       std::make_unique<DDRotationMatrix>(r.xx(), r.xy(), r.xz(), r.yx(), r.yy(), r.yz(), r.zx(), r.zy(), r.zz()));
 }

References ddname(), DDrot(), m_idNameSpace, alignCSCRings::r, and alignCSCRings::s.

Referenced by execute(), and web().

◆ mytrap()

DDSolid DDEcalBarrelAlgo::mytrap	(	const std::string &	s,
		const Trap &	t
	)		const

Definition at line 2921 of file DDEcalBarrelAlgo.cc.

                                                                                            {
   return DDSolidFactory::trap(
       ddname(s), t.dz(), t.theta(), t.phi(), t.h1(), t.bl1(), t.tl1(), t.alp1(), t.h2(), t.bl2(), t.tl2(), t.alp2());
 }

Referenced by execute().

◆ wallThAlv()

double DDEcalBarrelAlgo::wallThAlv ( ) const

inline

Definition at line 126 of file DDEcalBarrelAlgo.cc.

126 { return m_WallThAlv; }

References m_WallThAlv.

Referenced by execute().

◆ web()

void DDEcalBarrelAlgo::web	(	unsigned int	iWeb,
		double	bWeb,
		double	BWeb,
		double	LWeb,
		double	theta,
		const Pt3D &	corner,
		const DDLogicalPart &	logPar,
		double &	zee,
		double	side,
		double	front,
		double	delta,
		DDCompactView &	cpv
	)

private

Definition at line 2926 of file DDEcalBarrelAlgo.cc.

                                                {
   const unsigned int copyOne(1);
  
   const double LWebx(vecWebLength()[iWeb]);
  
   const double BWebx(bWeb + (BWeb - bWeb) * LWebx / LWeb);
  
   const double thick(vecWebPlTh()[iWeb] + vecWebClrTh()[iWeb]);
   const Trap trapWebClr(BWebx / 2,     // A/2
                         bWeb / 2,      // a/2
                         bWeb / 2,      // b/2
                         thick / 2,     // H/2
                         thick / 2,     // h/2
                         LWebx / 2,     // L/2
                         90 * deg,      // alfa1
                         bWeb - BWebx,  // x15
                         0              // y15
   );
   const DDName webClrDDName(webClrName() + std::to_string(iWeb));
   const DDSolid webClrSolid(mytrap(webClrDDName.name(), trapWebClr));
   const DDLogicalPart webClrLog(webClrDDName, webClrMat(), webClrSolid);
  
   const Trap trapWebPl(trapWebClr.A() / 2,               // A/2
                        trapWebClr.a() / 2,               // a/2
                        trapWebClr.b() / 2,               // b/2
                        vecWebPlTh()[iWeb] / 2,           // H/2
                        vecWebPlTh()[iWeb] / 2,           // h/2
                        trapWebClr.L() / 2.,              // L/2
                        90 * deg,                         // alfa1
                        trapWebClr.b() - trapWebClr.B(),  // x15
                        0                                 // y15
   );
   const DDName webPlDDName(webPlName() + std::to_string(iWeb));
   const DDSolid webPlSolid(mytrap(webPlDDName.fullname(), trapWebPl));
   const DDLogicalPart webPlLog(webPlDDName, webPlMat(), webPlSolid);
  
   cpv.position(webPlLog,  // place plate inside clearance volume
                webClrDDName,
                copyOne,
                DDTranslation(0, 0, 0),
                DDRotation());
  
   const Trap::VertexList vWeb(trapWebClr.vertexList());
  
   zee += trapWebClr.h() / sin(theta);
  
   const double beta(theta + delta);
  
   const double zWeb(zee - front * cos(beta) + side * sin(beta));
   const double yWeb(front * sin(beta) + side * cos(beta));
  
   const Pt3D wedge3(corner + Pt3D(0, -yWeb, zWeb));
   const Pt3D wedge2(wedge3 + Pt3D(0, trapWebClr.h() * cos(theta), -trapWebClr.h() * sin(theta)));
   const Pt3D wedge1(wedge3 + Pt3D(trapWebClr.a(), 0, 0));
  
   LogDebug("EcalGeom") << "trap1=" << vWeb[0] << ", trap2=" << vWeb[2] << ", trap3=" << vWeb[3];
  
   LogDebug("EcalGeom") << "wedge1=" << wedge1 << ", wedge2=" << wedge2 << ", wedge3=" << wedge3;
  
   const Tf3D tForm(vWeb[0], vWeb[2], vWeb[3], wedge1, wedge2, wedge3);
  
   if (0 != webHere())
     cpv.position(webClrLog,
                  logPar,
                  copyOne,
                  DDTranslation(tForm.getTranslation().x(), tForm.getTranslation().y(), tForm.getTranslation().z()),
                  myrot(webClrLog.name().name() + std::to_string(iWeb), tForm.getRotation()));
 }

private

Definition at line 478 of file DDEcalBarrelAlgo.cc.

Referenced by initialize(), and wrapReAlv().

◆ m_WrapThAlv

double DDEcalBarrelAlgo::m_WrapThAlv

private

Definition at line 469 of file DDEcalBarrelAlgo.cc.

Referenced by initialize(), and wrapThAlv().

Public Types

Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Member Typedef Documentation

◆ Pt3D

◆ RfZ3D

◆ Ro3D

◆ Rota

◆ RoX3D

◆ RoY3D

◆ RoZ3D

◆ Tf3D

◆ Tl3D

◆ Trap

◆ Vec3

Constructor & Destructor Documentation

◆ DDEcalBarrelAlgo()

◆ ~DDEcalBarrelAlgo()

Member Function Documentation

◆ apdHere()

◆ apdMat()

◆ apdName()

◆ apdSide()

◆ apdThick()

◆ apdX1()

◆ apdX2()

◆ apdZ()

◆ backBracketHeight()

◆ backBracketMat()

◆ backBracketName()

◆ backCBStdSep()

◆ backCoolBarHeight()

◆ backCoolBarHere()

◆ backCoolBarMat()

◆ backCoolBarName()

◆ backCoolBarSSMat()

◆ backCoolBarSSName()

◆ backCoolBarSSThick()

◆ backCoolBarThick()

◆ backCoolBarWaMat()

◆ backCoolBarWaName()

◆ backCoolBarWaThick()

◆ backCoolBarWidth()

◆ backCoolHere()

◆ backCoolMat()

◆ backCoolTankHere()

◆ backCoolTankMat()

◆ backCoolTankName()

◆ backCoolTankThick()

◆ backCoolTankWaMat()

◆ backCoolTankWaName()

◆ backCoolTankWaWidth()

◆ backCoolTankWidth()

◆ backCoolVFEHere()

◆ backCoolVFEMat()

◆ backCoolVFEName()

◆ backHere()

◆ backMiscHere()

◆ backPipeHere()

◆ backPipeMat()

◆ backPipeName()

◆ backPipeWaterMat()

◆ backPlate2Mat()

◆ backPlate2Name()

◆ backPlate2Thick()

◆ backPlateHere()

◆ backPlateLength()

◆ backPlateMat()

◆ backPlateName()

◆ backPlateThick()

◆ backPlateWidth()

◆ backSideAngle()

◆ backSideHeight()

◆ backSideHere()

◆ backSideLength()

◆ backSideMat()

◆ backSideName()

◆ backSideWidth()