#include <DTEfficiencyTask.h>

Inheritance diagram for DTEfficiencyTask:

Public Member Functions
void	analyze (const edm::Event &event, const edm::EventSetup &setup) override

void	beginLuminosityBlock (edm::LuminosityBlock const &lumiSeg, edm::EventSetup const &context) override
	To reset the MEs. More...

	DTEfficiencyTask (const edm::ParameterSet &pset)
	Constructor. More...

void	endLuminosityBlock (edm::LuminosityBlock const &lumiSeg, edm::EventSetup const &context) final

	~DTEfficiencyTask () override
	Destructor. More...

Public Member Functions inherited from DQMOneEDAnalyzer< edm::one::WatchLuminosityBlocks >
void	accumulate (edm::Event const &event, edm::EventSetup const &setup) override

void	beginRun (edm::Run const &run, edm::EventSetup const &setup) final

	DQMOneEDAnalyzer ()

void	endRun (edm::Run const &, edm::EventSetup const &) final

void	endRunProduce (edm::Run &run, edm::EventSetup const &setup) final

virtual bool	getCanSaveByLumi ()

Public Member Functions inherited from edm::one::EDProducer< edm::EndRunProducer, edm::one::WatchRuns, edm::Accumulator, Args... >
	EDProducer ()=default

SerialTaskQueue *	globalLuminosityBlocksQueue () final

SerialTaskQueue *	globalRunsQueue () final

bool	hasAbilityToProduceInBeginLumis () const final

bool	hasAbilityToProduceInBeginProcessBlocks () const final

bool	hasAbilityToProduceInBeginRuns () const final

bool	hasAbilityToProduceInEndLumis () const final

bool	hasAbilityToProduceInEndProcessBlocks () const final

bool	hasAbilityToProduceInEndRuns () const final

bool	wantsGlobalLuminosityBlocks () const final

bool	wantsGlobalRuns () const final

bool	wantsInputProcessBlocks () const final

bool	wantsProcessBlocks () const final

Public Member Functions inherited from edm::one::EDProducerBase
	EDProducerBase ()

ModuleDescription const &	moduleDescription () const

bool	wantsStreamLuminosityBlocks () const

bool	wantsStreamRuns () const

	~EDProducerBase () override

Public Member Functions inherited from edm::ProducerBase
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)

std::vector< edm::ProductResolverIndex > const &	indiciesForPutProducts (BranchType iBranchType) const

	ProducerBase ()

std::vector< edm::ProductResolverIndex > const &	putTokenIndexToProductResolverIndex () const

std::vector< bool > const &	recordProvenanceList () const

void	registerProducts (ProducerBase , ProductRegistry , ModuleDescription const &)

std::function< void(BranchDescription const &)>	registrationCallback () const
	used by the fwk to register list of products More...

void	resolvePutIndicies (BranchType iBranchType, ModuleToResolverIndicies const &iIndicies, std::string const &moduleLabel)

TypeLabelList const &	typeLabelList () const
	used by the fwk to register the list of products of this module More...

	~ProducerBase () noexcept(false) override

Public Member Functions inherited from edm::EDConsumerBase
std::vector< ConsumesInfo >	consumesInfo () const

void	convertCurrentProcessAlias (std::string const &processName)
	Convert "@currentProcess" in InputTag process names to the actual current process name. More...

	EDConsumerBase ()

	EDConsumerBase (EDConsumerBase &&)=default

	EDConsumerBase (EDConsumerBase const &)=delete

ESProxyIndex const *	esGetTokenIndices (edm::Transition iTrans) const

std::vector< ESProxyIndex > const &	esGetTokenIndicesVector (edm::Transition iTrans) const

std::vector< ESRecordIndex > const &	esGetTokenRecordIndicesVector (edm::Transition iTrans) const

ProductResolverIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const

void	itemsMayGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const

void	itemsToGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const

std::vector< ProductResolverIndexAndSkipBit > const &	itemsToGetFrom (BranchType iType) const

void	labelsForToken (EDGetToken iToken, Labels &oLabels) const

void	modulesWhoseProductsAreConsumed (std::vector< ModuleDescription const * > &modules, ProductRegistry const &preg, std::map< std::string, ModuleDescription const * > const &labelsToDesc, std::string const &processName) const

EDConsumerBase &	operator= (EDConsumerBase &&)=default

EDConsumerBase const &	operator= (EDConsumerBase const &)=delete

bool	registeredToConsume (ProductResolverIndex, bool, BranchType) const

bool	registeredToConsumeMany (TypeID const &, BranchType) const

ProductResolverIndexAndSkipBit	uncheckedIndexFrom (EDGetToken) const

void	updateLookup (BranchType iBranchType, ProductResolverIndexHelper const &, bool iPrefetchMayGet)

void	updateLookup (eventsetup::ESRecordsToProxyIndices const &)

virtual	~EDConsumerBase () noexcept(false)

Protected Member Functions
void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override

void	dqmBeginRun (const edm::Run &, const edm::EventSetup &) override
	BeginRun. More...

Protected Member Functions inherited from DQMOneEDAnalyzer< edm::one::WatchLuminosityBlocks >
virtual void	dqmEndRun (edm::Run const &, edm::EventSetup const &)

Protected Member Functions inherited from edm::ProducerBase
template<class ProductType >
BranchAliasSetterT< ProductType >	produces ()
	declare what type of product will make and with which optional label More...

template<typename ProductType , BranchType B>
BranchAliasSetterT< ProductType >	produces ()

template<typename ProductType , Transition B>
BranchAliasSetterT< ProductType >	produces ()

BranchAliasSetter	produces (const TypeID &id, std::string instanceName=std::string(), bool recordProvenance=true)

template<BranchType B>
BranchAliasSetter	produces (const TypeID &id, std::string instanceName=std::string(), bool recordProvenance=true)

template<Transition B>
BranchAliasSetter	produces (const TypeID &id, std::string instanceName=std::string(), bool recordProvenance=true)

template<typename ProductType , Transition B>
BranchAliasSetterT< ProductType >	produces (std::string instanceName)

template<class ProductType >
BranchAliasSetterT< ProductType >	produces (std::string instanceName)

template<typename ProductType , BranchType B>
BranchAliasSetterT< ProductType >	produces (std::string instanceName)

ProducesCollector	producesCollector ()

Protected Member Functions inherited from edm::EDConsumerBase
EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)

template<BranchType B = InEvent>
EDConsumerBaseAdaptor< B >	consumes (edm::InputTag tag) noexcept

template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)

ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...

template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()

void	consumesMany (const TypeToGet &id)

template<BranchType B>
void	consumesMany (const TypeToGet &id)

template<typename ESProduct , typename ESRecord , Transition Tr = Transition::Event>
auto	esConsumes ()

template<Transition Tr = Transition::Event>
constexpr auto	esConsumes () noexcept

template<typename ESProduct , typename ESRecord , Transition Tr = Transition::Event>
auto	esConsumes (ESInputTag const &tag)

template<Transition Tr = Transition::Event>
auto	esConsumes (ESInputTag tag) noexcept

template<Transition Tr = Transition::Event>
ESGetTokenGeneric	esConsumes (eventsetup::EventSetupRecordKey const &iRecord, eventsetup::DataKey const &iKey)
	Used with EventSetupRecord::doGet. More...

EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)

Private Member Functions
void	fillHistos (DTLayerId lId, int firstWire, int lastWire, int missingWire, bool UnassHit)

void	fillHistos (DTLayerId lId, int firstWire, int lastWire, int numWire)

Private Attributes
bool	debug

std::map< DTLayerId, std::vector< MonitorElement * > >	histosPerL

edm::ESHandle< DTGeometry >	muonGeom

edm::ParameterSet	parameters

edm::EDGetTokenT< DTRecSegment4DCollection >	recHits4DToken_

edm::EDGetTokenT< DTRecHitCollection >	recHitToken_

Additional Inherited Members
Public Types inherited from DQMOneEDAnalyzer< edm::one::WatchLuminosityBlocks >
typedef dqm::reco::DQMStore	DQMStore

typedef dqm::reco::MonitorElement	MonitorElement

Public Types inherited from edm::one::EDProducerBase
typedef EDProducerBase	ModuleType

Public Types inherited from edm::ProducerBase
using	ModuleToResolverIndicies = std::unordered_multimap< std::string, std::tuple< edm::TypeID const , const char , edm::ProductResolverIndex > >

typedef ProductRegistryHelper::TypeLabelList	TypeLabelList

Public Types inherited from edm::EDConsumerBase
typedef ProductLabels	Labels

Static Public Member Functions inherited from edm::one::EDProducerBase
static const std::string &	baseType ()

static void	fillDescriptions (ConfigurationDescriptions &descriptions)

static void	prevalidate (ConfigurationDescriptions &descriptions)

Protected Attributes inherited from DQMOneEDAnalyzer< edm::one::WatchLuminosityBlocks >
edm::EDPutTokenT< DQMToken >	runToken_

Detailed Description

DQM Analysis of 4D DT segments, it produces plots about:

single cell efficiency All histos are produced per Layer

Author: G. Mila - INFN Torino

Definition at line 33 of file DTEfficiencyTask.h.

Constructor & Destructor Documentation

◆ DTEfficiencyTask()

DTEfficiencyTask::DTEfficiencyTask ( const edm::ParameterSet & pset )

Constructor.

Definition at line 33 of file DTEfficiencyTask.cc.

                                                            {
   debug = pset.getUntrackedParameter<bool>("debug", false);
   // the name of the 4D rec hits collection
   recHits4DToken_ = consumes<DTRecSegment4DCollection>(edm::InputTag(pset.getParameter<string>("recHits4DLabel")));
   // the name of the rechits collection
   recHitToken_ = consumes<DTRecHitCollection>(edm::InputTag(pset.getParameter<string>("recHitLabel")));
  
   parameters = pset;
 }

References debug, and muonDTDigis_cfi::pset.

◆ ~DTEfficiencyTask()

DTEfficiencyTask::~DTEfficiencyTask ( )

override

Destructor.

Definition at line 43 of file DTEfficiencyTask.cc.

43 {}

Member Function Documentation

◆ analyze()

void DTEfficiencyTask::analyze	(	const edm::Event &	event,
		const edm::EventSetup &	setup
	)

overridevirtual

Reimplemented from DQMOneEDAnalyzer< edm::one::WatchLuminosityBlocks >.

Definition at line 143 of file DTEfficiencyTask.cc.

                                                                                 {
   if (debug)
     cout << "[DTEfficiencyTask] Analyze #Run: " << event.id().run() << " #Event: " << event.id().event() << endl;
  
   // Get the 4D segment collection from the event
   edm::Handle<DTRecSegment4DCollection> all4DSegments;
   event.getByToken(recHits4DToken_, all4DSegments);
  
   // Get the rechit collection from the event
   Handle<DTRecHitCollection> dtRecHits;
   event.getByToken(recHitToken_, dtRecHits);
  
   // Get the DT Geometry
   ESHandle<DTGeometry> dtGeom;
   setup.get<MuonGeometryRecord>().get(dtGeom);
  
   // Loop over all chambers containing a segment
   DTRecSegment4DCollection::id_iterator chamberId;
   for (chamberId = all4DSegments->id_begin(); chamberId != all4DSegments->id_end(); ++chamberId) {
     // Get the chamber
     const DTChamber* chamber = dtGeom->chamber(*chamberId);
  
     // Get all 1D RecHits to be used for searches of hits not associated to segments and map them by wire
     const vector<const DTSuperLayer*>& SLayers = chamber->superLayers();
     map<DTWireId, int> wireAnd1DRecHits;
     for (vector<const DTSuperLayer*>::const_iterator superlayer = SLayers.begin(); superlayer != SLayers.end();
          superlayer++) {
       DTRecHitCollection::range range = dtRecHits->get(DTRangeMapAccessor::layersBySuperLayer((*superlayer)->id()));
       // Loop over the rechits of this ChamberId
       for (DTRecHitCollection::const_iterator rechit = range.first; rechit != range.second; ++rechit) {
         wireAnd1DRecHits[(*rechit).wireId()] = (*rechit).wireId().wire();
       }
     }
  
     // Get the 4D segment range for the corresponding ChamerId
     DTRecSegment4DCollection::range range = all4DSegments->get(*chamberId);
     int nsegm = distance(range.first, range.second);
     if (debug)
       cout << "   Chamber: " << *chamberId << " has " << nsegm << " 4D segments" << endl;
  
     // Loop over the rechits of this ChamerId
     for (DTRecSegment4DCollection::const_iterator segment4D = range.first; segment4D != range.second; ++segment4D) {
       if (debug)
         cout << "   == RecSegment dimension: " << (*segment4D).dimension() << endl;
  
       // If Station != 4 skip RecHits with dimension != 4
       // For the Station 4 consider 2D RecHits
       if ((*chamberId).station() != 4 && (*segment4D).dimension() != 4) {
         if (debug)
           cout << "[DTEfficiencyTask]***Warning: RecSegment dimension is not 4 but " << (*segment4D).dimension()
                << ", skipping!" << endl;
         continue;
       } else if ((*chamberId).station() == 4 && (*segment4D).dimension() != 2) {
         if (debug)
           cout << "[DTEfficiencyTask]***Warning: RecSegment dimension is not 2 but " << (*segment4D).dimension()
                << ", skipping!" << endl;
         continue;
       }
  
       vector<DTRecHit1D> recHits1D;
       bool rPhi = false;
       bool rZ = false;
  
       // Get 1D RecHits and select only events with 7 or 8 hits in phi and 3 or 4 hits in theta (if any)
       const DTChamberRecSegment2D* phiSeg = (*segment4D).phiSegment();
       vector<DTRecHit1D> phiRecHits = phiSeg->specificRecHits();
       rPhi = true;
       if (phiRecHits.size() < 7 || phiRecHits.size() > 8) {
         if (debug)
           cout << "[DTEfficiencyTask] Phi segments has: " << phiRecHits.size() << " hits, skipping"
                << endl;  // FIXME: info output
         continue;
       }
       copy(phiRecHits.begin(), phiRecHits.end(), back_inserter(recHits1D));
       const DTSLRecSegment2D* zSeg = nullptr;
       if ((*segment4D).dimension() == 4) {
         rZ = true;
         zSeg = (*segment4D).zSegment();
         vector<DTRecHit1D> zRecHits = zSeg->specificRecHits();
         if (zRecHits.size() < 3 || zRecHits.size() > 4) {
           if (debug)
             cout << "[DTEfficiencyTask] Theta segments has: " << zRecHits.size() << " hits, skipping"
                  << endl;  // FIXME: info output
           continue;
         }
         copy(zRecHits.begin(), zRecHits.end(), back_inserter(recHits1D));
       }
  
       // Skip the segment if it has more than 1 hit on the same layer
       vector<DTWireId> wireMap;
       for (vector<DTRecHit1D>::const_iterator recHit1D = recHits1D.begin(); recHit1D != recHits1D.end(); recHit1D++) {
         wireMap.push_back((*recHit1D).wireId());
       }
  
       bool hitsOnSameLayer = false;
       for (vector<DTWireId>::const_iterator channelId = wireMap.begin(); channelId != wireMap.end(); channelId++) {
         vector<DTWireId>::const_iterator next = channelId;
         next++;
         for (vector<DTWireId>::const_iterator ite = next; ite != wireMap.end(); ite++) {
           if ((*channelId).layerId() == (*ite).layerId()) {
             hitsOnSameLayer = true;
           }
         }
       }
       if (hitsOnSameLayer) {
         if (debug)
           cout << "[DTEfficiencyTask] This RecHit has 2 hits on the same layer, skipping!" << endl;
         continue;
       }
  
       // Select 2D segments with angle smaller than 45 deg
       LocalVector phiDirectionInChamber = (*phiSeg).localDirection();
       if (rPhi && fabs(phiDirectionInChamber.x() / phiDirectionInChamber.z()) > 1) {
         if (debug) {
           cout << "         RPhi segment has angle > 45 deg, skipping! " << endl;
           cout << "              Theta = " << phiDirectionInChamber.theta() << endl;
         }
         continue;
       }
       if (rZ) {
         LocalVector zDirectionInChamber = (*zSeg).localDirection();
         if (fabs(zDirectionInChamber.y() / zDirectionInChamber.z()) > 1) {
           if (debug) {
             cout << "         RZ segment has angle > 45 deg, skipping! " << endl;
             cout << "              Theta = " << zDirectionInChamber.theta() << endl;
           }
           continue;
         }
       }
  
       // Skip if the 4D segment has only 10 hits
       if (recHits1D.size() == 10) {
         if (debug)
           cout << "[DTEfficiencyTask] 4D Segment with only 10 hits, skipping!" << endl;
         continue;
       }
  
       // Analyse the case of 11 recHits for MB1,MB2,MB3 and of 7 recHits for MB4
       if ((rPhi && recHits1D.size() == 7) || (rZ && recHits1D.size() == 11)) {
         if (debug) {
           if (rPhi && recHits1D.size() == 7)
             cout << "[DTEfficiencyTask] MB4 Segment with only 7 hits!" << endl;
           if (rZ && recHits1D.size() == 11)
             cout << "[DTEfficiencyTask] 4D Segment with only 11 hits!" << endl;
         }
  
         // Find the layer without RecHits ----------------------------------------
         const vector<const DTSuperLayer*>& SupLayers = chamber->superLayers();
         map<DTLayerId, bool> layerMap;
         map<DTWireId, float> wireAndPosInChamberAtLayerZ;
         // Loop over layers and wires to fill a map
         for (vector<const DTSuperLayer*>::const_iterator superlayer = SupLayers.begin(); superlayer != SupLayers.end();
              superlayer++) {
           const vector<const DTLayer*> Layers = (*superlayer)->layers();
           for (vector<const DTLayer*>::const_iterator layer = Layers.begin(); layer != Layers.end(); layer++) {
             layerMap.insert(make_pair((*layer)->id(), false));
             const int firstWire = dtGeom->layer((*layer)->id())->specificTopology().firstChannel();
             const int lastWire = dtGeom->layer((*layer)->id())->specificTopology().lastChannel();
             for (int i = firstWire; i - lastWire <= 0; i++) {
               DTWireId wireId((*layer)->id(), i);
               float wireX = (*layer)->specificTopology().wirePosition(wireId.wire());
               LocalPoint wirePosInLay(wireX, 0, 0);
               GlobalPoint wirePosGlob = (*layer)->toGlobal(wirePosInLay);
               LocalPoint wirePosInChamber = chamber->toLocal(wirePosGlob);
               if ((*superlayer)->id().superlayer() == 1 || (*superlayer)->id().superlayer() == 3) {
                 wireAndPosInChamberAtLayerZ.insert(make_pair(wireId, wirePosInChamber.x()));
               } else {
                 wireAndPosInChamberAtLayerZ.insert(make_pair(wireId, wirePosInChamber.y()));
               }
             }
           }
         }
  
         // Loop over segment 1D RecHit
         map<DTLayerId, int> NumWireMap;
         for (vector<DTRecHit1D>::const_iterator recHit = recHits1D.begin(); recHit != recHits1D.end(); recHit++) {
           layerMap[(*recHit).wireId().layerId()] = true;
           NumWireMap[(*recHit).wireId().layerId()] = (*recHit).wireId().wire();
         }
  
         DTLayerId missLayerId;
         //Loop over the map and find the layer without hits
         for (map<DTLayerId, bool>::const_iterator iter = layerMap.begin(); iter != layerMap.end(); iter++) {
           if (!(*iter).second)
             missLayerId = (*iter).first;
         }
         if (debug)
           cout << "[DTEfficiencyTask] Layer without recHits is: " << missLayerId << endl;
         // -------------------------------------------------------
  
         const DTLayer* missLayer = chamber->layer(missLayerId);
  
         LocalPoint missLayerPosInChamber = chamber->toLocal(missLayer->toGlobal(LocalPoint(0, 0, 0)));
  
         // Segment position at Wire z in chamber local frame
         LocalPoint segPosAtZLayer = (*segment4D).localPosition() + (*segment4D).localDirection() *
                                                                        missLayerPosInChamber.z() /
                                                                        cos((*segment4D).localDirection().theta());
  
         DTWireId missWireId;
  
         // Find the id of the cell without hit ---------------------------------------------------
         for (map<DTWireId, float>::const_iterator wireAndPos = wireAndPosInChamberAtLayerZ.begin();
              wireAndPos != wireAndPosInChamberAtLayerZ.end();
              wireAndPos++) {
           DTWireId wireId = (*wireAndPos).first;
           if (wireId.layerId() == missLayerId) {
             if (missLayerId.superlayerId().superlayer() == 1 || missLayerId.superlayerId().superlayer() == 3) {
               if (fabs(segPosAtZLayer.x() - (*wireAndPos).second) < 2.1)
                 missWireId = wireId;
             } else {
               if (fabs(segPosAtZLayer.y() - (*wireAndPos).second) < 2.1)
                 missWireId = wireId;
             }
           }
         }
         if (debug)
           cout << "[DTEfficiencyTask] Cell without hit is: " << missWireId << endl;
         // ----------------------------------------------------------
  
         bool foundUnAssRechit = false;
  
         // Look for unassociated hits in this cell
         if (wireAnd1DRecHits.find(missWireId) != wireAnd1DRecHits.end()) {
           if (debug)
             cout << "[DTEfficiencyTask] Unassociated Hit found!" << endl;
           foundUnAssRechit = true;
         }
  
         for (map<DTLayerId, bool>::const_iterator iter = layerMap.begin(); iter != layerMap.end(); iter++) {
           if ((*iter).second)
             fillHistos((*iter).first,
                        dtGeom->layer((*iter).first)->specificTopology().firstChannel(),
                        dtGeom->layer((*iter).first)->specificTopology().lastChannel(),
                        NumWireMap[(*iter).first]);
           else
             fillHistos((*iter).first,
                        dtGeom->layer((*iter).first)->specificTopology().firstChannel(),
                        dtGeom->layer((*iter).first)->specificTopology().lastChannel(),
                        missWireId.wire(),
                        foundUnAssRechit);
         }
  
       }  // End of the loop for segment with 7 or 11 recHits
  
       if ((rPhi && recHits1D.size() == 8) || (rZ && recHits1D.size() == 12)) {
         map<DTLayerId, int> NumWireMap;
         DTLayerId LayerID;
         for (vector<DTRecHit1D>::const_iterator recHit = recHits1D.begin(); recHit != recHits1D.end(); recHit++) {
           LayerID = (*recHit).wireId().layerId();
           NumWireMap[LayerID] = (*recHit).wireId().wire();
         }
         for (map<DTLayerId, int>::const_iterator iter = NumWireMap.begin(); iter != NumWireMap.end(); iter++) {
           fillHistos((*iter).first,
                      dtGeom->layer((*iter).first)->specificTopology().firstChannel(),
                      dtGeom->layer((*iter).first)->specificTopology().lastChannel(),
                      NumWireMap[(*iter).first]);
         }
       }
  
     }  // End of loop over the 4D segments inside a sigle chamber
   }    // End of loop over all tha chamber with at least a 4D segment in the event
 }

References relativeConstraints::chamber, DTGeometry::chamber(), filterCSVwithJSON::copy, funct::cos(), gather_cfg::cout, debug, HLT_FULL_cff::distance, DTTopology::firstChannel(), edm::get(), mps_fire::i, DTTopology::lastChannel(), DTGeometry::layer(), DTWireId::layerId(), DTRangeMapAccessor::layersBySuperLayer(), GetRecoTauVFromDQM_MC_cff::next, FastTimerService_cff::range, rpcPointValidation_cfi::recHit, singleTopDQM_cfi::setup, DTRecSegment2D::specificRecHits(), DTLayer::specificTopology(), DTSuperLayerId::superlayer(), DTLayerId::superlayerId(), PV3DBase< T, PVType, FrameType >::theta(), GeomDet::toGlobal(), PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

◆ beginLuminosityBlock()

void DTEfficiencyTask::beginLuminosityBlock	(	edm::LuminosityBlock const &	lumiSeg,
		edm::EventSetup const &	context
	)

override

To reset the MEs.

Definition at line 131 of file DTEfficiencyTask.cc.

                                                                                                      {
   if (lumiSeg.id().luminosityBlock() % parameters.getUntrackedParameter<int>("ResetCycle", 3) == 0) {
     for (map<DTLayerId, vector<MonitorElement*> >::const_iterator histo = histosPerL.begin(); histo != histosPerL.end();
          histo++) {
       int size = (*histo).second.size();
       for (int i = 0; i < size; i++) {
         (*histo).second[i]->Reset();
       }
     }
   }
 }

References timingPdfMaker::histo, mps_fire::i, edm::LuminosityBlockBase::id(), edm::LuminosityBlockID::luminosityBlock(), genParticles_cff::map, and findQualityFiles::size.

◆ bookHistograms()

void DTEfficiencyTask::bookHistograms	(	DQMStore::IBooker &	ibooker,
		edm::Run const &	iRun,
		edm::EventSetup const &	context
	)

overrideprotectedvirtual

Implements DQMOneEDAnalyzer< edm::one::WatchLuminosityBlocks >.

Definition at line 50 of file DTEfficiencyTask.cc.

                                                                     {
   ibooker.setCurrentFolder("DT/DTEfficiencyTask");
  
   cout << "[DTTestPulseTask]: booking" << endl;
  
   //here put the static booking loop
  
   // Loop over all the chambers
   vector<const DTChamber*>::const_iterator ch_it = muonGeom->chambers().begin();
   vector<const DTChamber*>::const_iterator ch_end = muonGeom->chambers().end();
  
   for (; ch_it != ch_end; ++ch_it) {
     // Loop over the SLs
     vector<const DTSuperLayer*>::const_iterator sl_it = (*ch_it)->superLayers().begin();
     vector<const DTSuperLayer*>::const_iterator sl_end = (*ch_it)->superLayers().end();
  
     for (; sl_it != sl_end; ++sl_it) {
       DTSuperLayerId sl = (*sl_it)->id();
       stringstream superLayer;
       superLayer << sl.superlayer();
  
       // Loop over the Ls
       vector<const DTLayer*>::const_iterator l_it = (*sl_it)->layers().begin();
       vector<const DTLayer*>::const_iterator l_end = (*sl_it)->layers().end();
  
       for (; l_it != l_end; ++l_it) {
         DTLayerId layerId = (*l_it)->id();
         if (debug)
           cout << "   Booking histos for L: " << layerId << endl;
  
         // Compose the chamber name
         stringstream layer;
         layer << layerId.layer();
         stringstream superLayer;
         superLayer << layerId.superlayer();
         stringstream station;
         station << layerId.superlayerId().chamberId().station();
         stringstream sector;
         sector << layerId.superlayerId().chamberId().sector();
         stringstream wheel;
         wheel << layerId.superlayerId().chamberId().wheel();
  
         const int firstWire = (*l_it)->specificTopology().firstChannel();
         const int lastWire = (*l_it)->specificTopology().lastChannel();
  
         string lHistoName = "_W" + wheel.str() + "_St" + station.str() + "_Sec" + sector.str() + "_SL" +
                             superLayer.str() + "_L" + layer.str();
  
         ibooker.setCurrentFolder("DT/DTEfficiencyTask/Wheel" + wheel.str() + "/Station" + station.str() + "/Sector" +
                                  sector.str() + "/SuperLayer" + superLayer.str());
  
         // Create the monitor elements
         vector<MonitorElement*> histos;
         // histo for hits associated to the 4D reconstructed segment
         histos.push_back(ibooker.book1D("hEffOccupancy" + lHistoName,
                                         "4D segments recHits occupancy",
                                         lastWire - firstWire + 1,
                                         firstWire - 0.5,
                                         lastWire + 0.5));
         // histo for hits not associated to the segment
         histos.push_back(ibooker.book1D("hEffUnassOccupancy" + lHistoName,
                                         "4D segments recHits and Hits not associated occupancy",
                                         lastWire - firstWire + 1,
                                         firstWire - 0.5,
                                         lastWire + 0.5));
         // histo for cells associated to the 4D reconstructed segment
         histos.push_back(ibooker.book1D("hRecSegmOccupancy" + lHistoName,
                                         "4D segments cells occupancy",
                                         lastWire - firstWire + 1,
                                         firstWire - 0.5,
                                         lastWire + 0.5));
  
         histosPerL[layerId] = histos;
  
       }  // layer
     }    // superlayer
   }      // chambers
 }

References dqm::implementation::IBooker::book1D(), DTSuperLayerId::chamberId(), gather_cfg::cout, debug, combine::histos, DTLayerId::layer(), DTChamberId::sector(), dqm::implementation::NavigatorBase::setCurrentFolder(), DTChamberId::station(), relativeConstraints::station, DTSuperLayerId::superlayer(), DTLayerId::superlayerId(), DTChamberId::wheel(), and makeMuonMisalignmentScenario::wheel.

◆ dqmBeginRun()

void DTEfficiencyTask::dqmBeginRun	(	const edm::Run &	run,
		const edm::EventSetup &	context
	)

overrideprotectedvirtual

BeginRun.

Reimplemented from DQMOneEDAnalyzer< edm::one::WatchLuminosityBlocks >.

Definition at line 45 of file DTEfficiencyTask.cc.

                                                                                   {
   // Get the geometry
   context.get<MuonGeometryRecord>().get(muonGeom);
 }

References edm::EventSetup::get(), and edm::get().

◆ endLuminosityBlock()

void DTEfficiencyTask::endLuminosityBlock	(	edm::LuminosityBlock const &	lumiSeg,
		edm::EventSetup const &	context
	)

inlinefinal

Definition at line 43 of file DTEfficiencyTask.h.

43 {}

◆ fillHistos() [1/2]

void DTEfficiencyTask::fillHistos	(	DTLayerId	lId,
		int	firstWire,
		int	lastWire,
		int	missingWire,
		bool	UnassHit
	)

private

Definition at line 416 of file DTEfficiencyTask.cc.

                                                                                                             {
   vector<MonitorElement*> histos = histosPerL[lId];
   if (unassHit)
     histos[1]->Fill(missingWire);
   histos[2]->Fill(missingWire);
 }

References combine::histos.

◆ fillHistos() [2/2]

void DTEfficiencyTask::fillHistos	(	DTLayerId	lId,
		int	firstWire,
		int	lastWire,
		int	numWire
	)

private

Definition at line 408 of file DTEfficiencyTask.cc.

                                                                                          {
   vector<MonitorElement*> histos = histosPerL[lId];
   histos[0]->Fill(numWire);
   histos[1]->Fill(numWire);
   histos[2]->Fill(numWire);
 }

References combine::histos.

Member Data Documentation

◆ debug

bool DTEfficiencyTask::debug

private

Definition at line 59 of file DTEfficiencyTask.h.

Referenced by util.rrapi.RRApi::dprint(), rrapi.RRApi::dprint(), pkg.AbstractPkg::generate(), util.rrapi.RRApi::get(), rrapi.RRApi::get(), pkg.AbstractPkg::get_kwds(), runTauIdMVA.TauIDEmbedder::loadMVA_WPs_run2_2017(), runTauIdMVA.TauIDEmbedder::runTauID(), and pkg.AbstractPkg::write().

◆ histosPerL

std::map<DTLayerId, std::vector<MonitorElement*> > DTEfficiencyTask::histosPerL

private

Definition at line 73 of file DTEfficiencyTask.h.

◆ muonGeom

edm::ESHandle<DTGeometry> DTEfficiencyTask::muonGeom

private

Definition at line 56 of file DTEfficiencyTask.h.

◆ parameters

edm::ParameterSet DTEfficiencyTask::parameters

private

Definition at line 67 of file DTEfficiencyTask.h.

◆ recHits4DToken_

edm::EDGetTokenT<DTRecSegment4DCollection> DTEfficiencyTask::recHits4DToken_

private

Definition at line 62 of file DTEfficiencyTask.h.

◆ recHitToken_

edm::EDGetTokenT<DTRecHitCollection> DTEfficiencyTask::recHitToken_

private

Definition at line 65 of file DTEfficiencyTask.h.

Public Member Functions

Protected Member Functions

Private Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ DTEfficiencyTask()

◆ ~DTEfficiencyTask()

Member Function Documentation

◆ analyze()

◆ beginLuminosityBlock()

◆ bookHistograms()

◆ dqmBeginRun()

◆ endLuminosityBlock()

◆ fillHistos() [1/2]

◆ fillHistos() [2/2]

Member Data Documentation

◆ debug

◆ histosPerL

◆ muonGeom

◆ parameters

◆ recHits4DToken_

◆ recHitToken_