CMS 3D CMS Logo
List of all members | Public Member Functions | Public Attributes | Private Attributes
OuterTrackerMonitorTTStub Class Reference

#include <OuterTrackerMonitorTTStub.h>

Inheritance diagram for OuterTrackerMonitorTTStub:
DQMEDAnalyzer edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >

Public Member Functions

void analyze (const edm::Event &, const edm::EventSetup &) override
 
void bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override
 
 OuterTrackerMonitorTTStub (const edm::ParameterSet &)
 
 ~OuterTrackerMonitorTTStub () override
 
- Public Member Functions inherited from DQMEDAnalyzer
void accumulate (edm::Event const &event, edm::EventSetup const &setup) final
 
void beginLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final
 
void beginRun (edm::Run const &run, edm::EventSetup const &setup) final
 
void beginStream (edm::StreamID id) final
 
virtual void dqmBeginRun (edm::Run const &, edm::EventSetup const &)
 
 DQMEDAnalyzer ()
 
void endLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final
 
void endRun (edm::Run const &run, edm::EventSetup const &setup) final
 
virtual bool getCanSaveByLumi ()
 
- Public Member Functions inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
 EDProducer ()=default
 
bool hasAbilityToProduceInBeginLumis () const final
 
bool hasAbilityToProduceInBeginRuns () const final
 
bool hasAbilityToProduceInEndLumis () const final
 
bool hasAbilityToProduceInEndRuns () const final
 

Public Attributes

MonitorElement * Stub_Barrel = nullptr
 
MonitorElement * Stub_Barrel_O = nullptr
 
MonitorElement * Stub_Barrel_W = nullptr
 
MonitorElement * Stub_Barrel_XY = nullptr
 
MonitorElement * Stub_Endcap_Bw_XY = nullptr
 
MonitorElement * Stub_Endcap_Disc = nullptr
 
MonitorElement * Stub_Endcap_Disc_Bw = nullptr
 
MonitorElement * Stub_Endcap_Disc_Fw = nullptr
 
MonitorElement * Stub_Endcap_Disc_O = nullptr
 
MonitorElement * Stub_Endcap_Disc_W = nullptr
 
MonitorElement * Stub_Endcap_Fw_XY = nullptr
 
MonitorElement * Stub_Endcap_Ring = nullptr
 
MonitorElement * Stub_Endcap_Ring_Bw [5] = {nullptr, nullptr, nullptr, nullptr, nullptr}
 
MonitorElement * Stub_Endcap_Ring_Fw [5] = {nullptr, nullptr, nullptr, nullptr, nullptr}
 
MonitorElement * Stub_Endcap_Ring_O = nullptr
 
MonitorElement * Stub_Endcap_Ring_O_Bw [5] = {nullptr, nullptr, nullptr, nullptr, nullptr}
 
MonitorElement * Stub_Endcap_Ring_O_Fw [5] = {nullptr, nullptr, nullptr, nullptr, nullptr}
 
MonitorElement * Stub_Endcap_Ring_W = nullptr
 
MonitorElement * Stub_Endcap_Ring_W_Bw [5]
 
MonitorElement * Stub_Endcap_Ring_W_Fw [5]
 
MonitorElement * Stub_Eta = nullptr
 
MonitorElement * Stub_Phi = nullptr
 
MonitorElement * Stub_R = nullptr
 
MonitorElement * Stub_RZ = nullptr
 

Private Attributes

edm::ParameterSet conf_
 
edm::EDGetTokenT< edmNew::DetSetVector< TTStub< Ref_Phase2TrackerDigi_ > > > tagTTStubsToken_
 
std::string topFolderName_
 

Additional Inherited Members

- Public Types inherited from DQMEDAnalyzer
typedef dqm::reco::DQMStore DQMStore
 
typedef dqm::reco::MonitorElement MonitorElement
 
- Public Types inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
typedef CacheContexts< T... > CacheTypes
 
typedef CacheTypes::GlobalCache GlobalCache
 
typedef AbilityChecker< T... > HasAbility
 
typedef CacheTypes::LuminosityBlockCache LuminosityBlockCache
 
typedef LuminosityBlockContextT< LuminosityBlockCache, RunCache, GlobalCache > LuminosityBlockContext
 
typedef CacheTypes::LuminosityBlockSummaryCache LuminosityBlockSummaryCache
 
typedef CacheTypes::RunCache RunCache
 
typedef RunContextT< RunCache, GlobalCache > RunContext
 
typedef CacheTypes::RunSummaryCache RunSummaryCache
 
- Static Public Member Functions inherited from DQMEDAnalyzer
static void globalEndJob (DQMEDAnalyzerGlobalCache const *)
 
static void globalEndLuminosityBlockProduce (edm::LuminosityBlock &lumi, edm::EventSetup const &setup, LuminosityBlockContext const *context)
 
static void globalEndRunProduce (edm::Run &run, edm::EventSetup const &setup, RunContext const *context)
 
static std::unique_ptr< DQMEDAnalyzerGlobalCache > initializeGlobalCache (edm::ParameterSet const &)
 
- Protected Member Functions inherited from DQMEDAnalyzer
uint64_t meId () const
 
- Protected Attributes inherited from DQMEDAnalyzer
edm::EDPutTokenT< DQMToken > lumiToken_
 
edm::EDPutTokenT< DQMToken > runToken_
 
unsigned int streamId_
 

Detailed Description

Definition at line 18 of file OuterTrackerMonitorTTStub.h.

Constructor & Destructor Documentation

◆ OuterTrackerMonitorTTStub()

OuterTrackerMonitorTTStub::OuterTrackerMonitorTTStub ( const edm::ParameterSet &  iConfig)
explicit

Definition at line 40 of file OuterTrackerMonitorTTStub.cc.

40  : conf_(iConfig) {
41  // now do what ever initialization is needed
42  topFolderName_ = conf_.getParameter<std::string>("TopFolderName");
43  tagTTStubsToken_ =
44  consumes<edmNew::DetSetVector<TTStub<Ref_Phase2TrackerDigi_>>>(conf_.getParameter<edm::InputTag>("TTStubs"));
45 }

References conf_, edm::ParameterSet::getParameter(), AlCaHLTBitMon_QueryRunRegistry::string, tagTTStubsToken_, and topFolderName_.

◆ ~OuterTrackerMonitorTTStub()

OuterTrackerMonitorTTStub::~OuterTrackerMonitorTTStub ( )
override

Definition at line 47 of file OuterTrackerMonitorTTStub.cc.

47  {
48  // do anything here that needs to be done at desctruction time
49  // (e.g. close files, deallocate resources etc.)
50 }

Member Function Documentation

◆ analyze()

void OuterTrackerMonitorTTStub::analyze ( const edm::Event &  iEvent,
const edm::EventSetup &  iSetup 
)
overridevirtual

Track Trigger Stubs

Geometry

Loop over input Stubs

Make reference stub

Get det ID (place of the stub)

Get trigger displacement/offset

Define position stub by position inner cluster

Reimplemented from DQMEDAnalyzer.

Definition at line 55 of file OuterTrackerMonitorTTStub.cc.

55  {
57  edm::Handle<edmNew::DetSetVector<TTStub<Ref_Phase2TrackerDigi_>>> Phase2TrackerDigiTTStubHandle;
58  iEvent.getByToken(tagTTStubsToken_, Phase2TrackerDigiTTStubHandle);
59 
61  edm::ESHandle<TrackerTopology> tTopoHandle;
62  const TrackerTopology *tTopo;
63  iSetup.get<TrackerTopologyRcd>().get(tTopoHandle);
64  tTopo = tTopoHandle.product();
65 
66  edm::ESHandle<TrackerGeometry> tGeometryHandle;
67  const TrackerGeometry *theTrackerGeometry;
68  iSetup.get<TrackerDigiGeometryRecord>().get(tGeometryHandle);
69  theTrackerGeometry = tGeometryHandle.product();
70 
72  typename edmNew::DetSetVector<TTStub<Ref_Phase2TrackerDigi_>>::const_iterator inputIter;
73  typename edmNew::DetSet<TTStub<Ref_Phase2TrackerDigi_>>::const_iterator contentIter;
74  // Adding protection
75  if (!Phase2TrackerDigiTTStubHandle.isValid())
76  return;
77 
78  for (inputIter = Phase2TrackerDigiTTStubHandle->begin(); inputIter != Phase2TrackerDigiTTStubHandle->end();
79  ++inputIter) {
80  for (contentIter = inputIter->begin(); contentIter != inputIter->end(); ++contentIter) {
82  edm::Ref<edmNew::DetSetVector<TTStub<Ref_Phase2TrackerDigi_>>, TTStub<Ref_Phase2TrackerDigi_>> tempStubRef =
83  edmNew::makeRefTo(Phase2TrackerDigiTTStubHandle, contentIter);
84 
86  // tempStubRef->getDetId() gives the stackDetId, not rawId
87  DetId detIdStub = theTrackerGeometry->idToDet((tempStubRef->clusterRef(0))->getDetId())->geographicalId();
88 
90  double displStub = tempStubRef->rawBend();
91  double offsetStub = tempStubRef->bendOffset();
92 
94  MeasurementPoint mp = (tempStubRef->clusterRef(0))->findAverageLocalCoordinates();
95  const GeomDet *theGeomDet = theTrackerGeometry->idToDet(detIdStub);
96  Global3DPoint posStub = theGeomDet->surface().toGlobal(theGeomDet->topology().localPosition(mp));
97 
98  Stub_Eta->Fill(posStub.eta());
99  Stub_Phi->Fill(posStub.phi());
100  Stub_R->Fill(posStub.perp());
101  Stub_RZ->Fill(posStub.z(), posStub.perp());
102 
103  if (detIdStub.subdetId() == static_cast<int>(StripSubdetector::TOB)) { // Phase 2 Outer Tracker Barrel
104  Stub_Barrel->Fill(tTopo->layer(detIdStub));
105  Stub_Barrel_XY->Fill(posStub.x(), posStub.y());
106  Stub_Barrel_W->Fill(tTopo->layer(detIdStub), displStub - offsetStub);
107  Stub_Barrel_O->Fill(tTopo->layer(detIdStub), offsetStub);
108  } else if (detIdStub.subdetId() == static_cast<int>(StripSubdetector::TID)) { // Phase 2 Outer Tracker Endcap
109  int disc = tTopo->layer(detIdStub); // returns wheel
110  int ring = tTopo->tidRing(detIdStub);
111  Stub_Endcap_Disc->Fill(disc);
112  Stub_Endcap_Ring->Fill(ring);
113  Stub_Endcap_Disc_W->Fill(disc, displStub - offsetStub);
114  Stub_Endcap_Ring_W->Fill(ring, displStub - offsetStub);
115  Stub_Endcap_Disc_O->Fill(disc, offsetStub);
116  Stub_Endcap_Ring_O->Fill(ring, offsetStub);
117 
118  if (posStub.z() > 0) {
119  Stub_Endcap_Fw_XY->Fill(posStub.x(), posStub.y());
120  Stub_Endcap_Disc_Fw->Fill(disc);
121  Stub_Endcap_Ring_Fw[disc - 1]->Fill(ring);
122  Stub_Endcap_Ring_W_Fw[disc - 1]->Fill(ring, displStub - offsetStub);
123  Stub_Endcap_Ring_O_Fw[disc - 1]->Fill(ring, offsetStub);
124  } else {
125  Stub_Endcap_Bw_XY->Fill(posStub.x(), posStub.y());
126  Stub_Endcap_Disc_Bw->Fill(disc);
127  Stub_Endcap_Ring_Bw[disc - 1]->Fill(ring);
128  Stub_Endcap_Ring_W_Bw[disc - 1]->Fill(ring, displStub - offsetStub);
129  Stub_Endcap_Ring_O_Bw[disc - 1]->Fill(ring, offsetStub);
130  }
131  }
132  }
133  }
134 } // end of method

References edmNew::DetSetVector< T >::begin(), TtSemiLepEvtBuilder_cfi::disc, edmNew::DetSetVector< T >::end(), PV3DBase< T, PVType, FrameType >::eta(), dqm::impl::MonitorElement::Fill(), edm::EventSetup::get(), get, TrackerGeometry::idToDet(), iEvent, edm::HandleBase::isValid(), TrackerTopology::layer(), Topology::localPosition(), edmNew::makeRefTo(), PV3DBase< T, PVType, FrameType >::perp(), PV3DBase< T, PVType, FrameType >::phi(), edm::ESHandle< T >::product(), relativeConstraints::ring, Stub_Barrel, Stub_Barrel_O, Stub_Barrel_W, Stub_Barrel_XY, Stub_Endcap_Bw_XY, Stub_Endcap_Disc, Stub_Endcap_Disc_Bw, Stub_Endcap_Disc_Fw, Stub_Endcap_Disc_O, Stub_Endcap_Disc_W, Stub_Endcap_Fw_XY, Stub_Endcap_Ring, Stub_Endcap_Ring_Bw, Stub_Endcap_Ring_Fw, Stub_Endcap_Ring_O, Stub_Endcap_Ring_O_Bw, Stub_Endcap_Ring_O_Fw, Stub_Endcap_Ring_W, Stub_Endcap_Ring_W_Bw, Stub_Endcap_Ring_W_Fw, Stub_Eta, Stub_Phi, Stub_R, Stub_RZ, DetId::subdetId(), GeomDet::surface(), tagTTStubsToken_, StripSubdetector::TID, TrackerTopology::tidRing(), StripSubdetector::TOB, Surface::toGlobal(), GeomDet::topology(), PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

◆ bookHistograms()

void OuterTrackerMonitorTTStub::bookHistograms ( DQMStore::IBooker &  iBooker,
edm::Run const &  run,
edm::EventSetup const &  es 
)
overridevirtual

Implements DQMEDAnalyzer.

Definition at line 137 of file OuterTrackerMonitorTTStub.cc.

139  {
140  std::string HistoName;
141  const int numDiscs = 5;
142  iBooker.setCurrentFolder(topFolderName_ + "/Stubs/Position");
143 
144  edm::ParameterSet psTTStub_Barrel_XY = conf_.getParameter<edm::ParameterSet>("TH2TTStub_Position");
145  HistoName = "Stub_Barrel_XY";
146  Stub_Barrel_XY = iBooker.book2D(HistoName,
147  HistoName,
148  psTTStub_Barrel_XY.getParameter<int32_t>("Nbinsx"),
149  psTTStub_Barrel_XY.getParameter<double>("xmin"),
150  psTTStub_Barrel_XY.getParameter<double>("xmax"),
151  psTTStub_Barrel_XY.getParameter<int32_t>("Nbinsy"),
152  psTTStub_Barrel_XY.getParameter<double>("ymin"),
153  psTTStub_Barrel_XY.getParameter<double>("ymax"));
154  Stub_Barrel_XY->setAxisTitle("L1 Stub Barrel position x [cm]", 1);
155  Stub_Barrel_XY->setAxisTitle("L1 Stub Barrel position y [cm]", 2);
156 
157  edm::ParameterSet psTTStub_Endcap_Fw_XY = conf_.getParameter<edm::ParameterSet>("TH2TTStub_Position");
158  HistoName = "Stub_Endcap_Fw_XY";
159  Stub_Endcap_Fw_XY = iBooker.book2D(HistoName,
160  HistoName,
161  psTTStub_Endcap_Fw_XY.getParameter<int32_t>("Nbinsx"),
162  psTTStub_Endcap_Fw_XY.getParameter<double>("xmin"),
163  psTTStub_Endcap_Fw_XY.getParameter<double>("xmax"),
164  psTTStub_Endcap_Fw_XY.getParameter<int32_t>("Nbinsy"),
165  psTTStub_Endcap_Fw_XY.getParameter<double>("ymin"),
166  psTTStub_Endcap_Fw_XY.getParameter<double>("ymax"));
167  Stub_Endcap_Fw_XY->setAxisTitle("L1 Stub Endcap position x [cm]", 1);
168  Stub_Endcap_Fw_XY->setAxisTitle("L1 Stub Endcap position y [cm]", 2);
169 
170  edm::ParameterSet psTTStub_Endcap_Bw_XY = conf_.getParameter<edm::ParameterSet>("TH2TTStub_Position");
171  HistoName = "Stub_Endcap_Bw_XY";
172  Stub_Endcap_Bw_XY = iBooker.book2D(HistoName,
173  HistoName,
174  psTTStub_Endcap_Bw_XY.getParameter<int32_t>("Nbinsx"),
175  psTTStub_Endcap_Bw_XY.getParameter<double>("xmin"),
176  psTTStub_Endcap_Bw_XY.getParameter<double>("xmax"),
177  psTTStub_Endcap_Bw_XY.getParameter<int32_t>("Nbinsy"),
178  psTTStub_Endcap_Bw_XY.getParameter<double>("ymin"),
179  psTTStub_Endcap_Bw_XY.getParameter<double>("ymax"));
180  Stub_Endcap_Bw_XY->setAxisTitle("L1 Stub Endcap position x [cm]", 1);
181  Stub_Endcap_Bw_XY->setAxisTitle("L1 Stub Endcap position y [cm]", 2);
182 
183  // TTStub #rho vs. z
184  edm::ParameterSet psTTStub_RZ = conf_.getParameter<edm::ParameterSet>("TH2TTStub_RZ");
185  HistoName = "Stub_RZ";
186  Stub_RZ = iBooker.book2D(HistoName,
187  HistoName,
188  psTTStub_RZ.getParameter<int32_t>("Nbinsx"),
189  psTTStub_RZ.getParameter<double>("xmin"),
190  psTTStub_RZ.getParameter<double>("xmax"),
191  psTTStub_RZ.getParameter<int32_t>("Nbinsy"),
192  psTTStub_RZ.getParameter<double>("ymin"),
193  psTTStub_RZ.getParameter<double>("ymax"));
194  Stub_RZ->setAxisTitle("L1 Stub position z [cm]", 1);
195  Stub_RZ->setAxisTitle("L1 Stub position #rho [cm]", 2);
196 
197  iBooker.setCurrentFolder(topFolderName_ + "/Stubs");
198  // TTStub eta
199  edm::ParameterSet psTTStub_Eta = conf_.getParameter<edm::ParameterSet>("TH1TTStub_Eta");
200  HistoName = "Stub_Eta";
201  Stub_Eta = iBooker.book1D(HistoName,
202  HistoName,
203  psTTStub_Eta.getParameter<int32_t>("Nbinsx"),
204  psTTStub_Eta.getParameter<double>("xmin"),
205  psTTStub_Eta.getParameter<double>("xmax"));
206  Stub_Eta->setAxisTitle("#eta", 1);
207  Stub_Eta->setAxisTitle("# L1 Stubs ", 2);
208 
209  // TTStub phi
210  edm::ParameterSet psTTStub_Phi = conf_.getParameter<edm::ParameterSet>("TH1TTStub_Phi");
211  HistoName = "Stub_Phi";
212  Stub_Phi = iBooker.book1D(HistoName,
213  HistoName,
214  psTTStub_Phi.getParameter<int32_t>("Nbinsx"),
215  psTTStub_Phi.getParameter<double>("xmin"),
216  psTTStub_Phi.getParameter<double>("xmax"));
217  Stub_Phi->setAxisTitle("#phi", 1);
218  Stub_Phi->setAxisTitle("# L1 Stubs ", 2);
219 
220  // TTStub R
221  edm::ParameterSet psTTStub_R = conf_.getParameter<edm::ParameterSet>("TH1TTStub_R");
222  HistoName = "Stub_R";
223  Stub_R = iBooker.book1D(HistoName,
224  HistoName,
225  psTTStub_R.getParameter<int32_t>("Nbinsx"),
226  psTTStub_R.getParameter<double>("xmin"),
227  psTTStub_R.getParameter<double>("xmax"));
228  Stub_R->setAxisTitle("R", 1);
229  Stub_R->setAxisTitle("# L1 Stubs ", 2);
230 
231  iBooker.setCurrentFolder(topFolderName_ + "/Stubs/NStubs");
232  // TTStub barrel stack
233  edm::ParameterSet psTTStub_Barrel = conf_.getParameter<edm::ParameterSet>("TH1TTStub_Layers");
234  HistoName = "NStubs_Barrel";
235  Stub_Barrel = iBooker.book1D(HistoName,
236  HistoName,
237  psTTStub_Barrel.getParameter<int32_t>("Nbinsx"),
238  psTTStub_Barrel.getParameter<double>("xmin"),
239  psTTStub_Barrel.getParameter<double>("xmax"));
240  Stub_Barrel->setAxisTitle("Barrel Layer", 1);
241  Stub_Barrel->setAxisTitle("# L1 Stubs ", 2);
242 
243  // TTStub Endcap stack
244  edm::ParameterSet psTTStub_ECDisc = conf_.getParameter<edm::ParameterSet>("TH1TTStub_Discs");
245  HistoName = "NStubs_Endcap_Disc";
246  Stub_Endcap_Disc = iBooker.book1D(HistoName,
247  HistoName,
248  psTTStub_ECDisc.getParameter<int32_t>("Nbinsx"),
249  psTTStub_ECDisc.getParameter<double>("xmin"),
250  psTTStub_ECDisc.getParameter<double>("xmax"));
251  Stub_Endcap_Disc->setAxisTitle("Endcap Disc", 1);
252  Stub_Endcap_Disc->setAxisTitle("# L1 Stubs ", 2);
253 
254  // TTStub Endcap stack
255  HistoName = "NStubs_Endcap_Disc_Fw";
256  Stub_Endcap_Disc_Fw = iBooker.book1D(HistoName,
257  HistoName,
258  psTTStub_ECDisc.getParameter<int32_t>("Nbinsx"),
259  psTTStub_ECDisc.getParameter<double>("xmin"),
260  psTTStub_ECDisc.getParameter<double>("xmax"));
261  Stub_Endcap_Disc_Fw->setAxisTitle("Forward Endcap Disc", 1);
262  Stub_Endcap_Disc_Fw->setAxisTitle("# L1 Stubs ", 2);
263 
264  // TTStub Endcap stack
265  HistoName = "NStubs_Endcap_Disc_Bw";
266  Stub_Endcap_Disc_Bw = iBooker.book1D(HistoName,
267  HistoName,
268  psTTStub_ECDisc.getParameter<int32_t>("Nbinsx"),
269  psTTStub_ECDisc.getParameter<double>("xmin"),
270  psTTStub_ECDisc.getParameter<double>("xmax"));
271  Stub_Endcap_Disc_Bw->setAxisTitle("Backward Endcap Disc", 1);
272  Stub_Endcap_Disc_Bw->setAxisTitle("# L1 Stubs ", 2);
273 
274  edm::ParameterSet psTTStub_ECRing = conf_.getParameter<edm::ParameterSet>("TH1TTStub_Rings");
275  HistoName = "NStubs_Endcap_Ring";
276  Stub_Endcap_Ring = iBooker.book1D(HistoName,
277  HistoName,
278  psTTStub_ECRing.getParameter<int32_t>("Nbinsx"),
279  psTTStub_ECRing.getParameter<double>("xmin"),
280  psTTStub_ECRing.getParameter<double>("xmax"));
281  Stub_Endcap_Ring->setAxisTitle("Endcap Ring", 1);
282  Stub_Endcap_Ring->setAxisTitle("# L1 Stubs ", 2);
283 
284  for (int i = 0; i < numDiscs; i++) {
285  HistoName = "NStubs_Disc+" + std::to_string(i + 1);
286  // TTStub Endcap stack
287  Stub_Endcap_Ring_Fw[i] = iBooker.book1D(HistoName,
288  HistoName,
289  psTTStub_ECRing.getParameter<int32_t>("Nbinsx"),
290  psTTStub_ECRing.getParameter<double>("xmin"),
291  psTTStub_ECRing.getParameter<double>("xmax"));
292  Stub_Endcap_Ring_Fw[i]->setAxisTitle("Endcap Ring", 1);
293  Stub_Endcap_Ring_Fw[i]->setAxisTitle("# L1 Stubs ", 2);
294  }
295 
296  for (int i = 0; i < numDiscs; i++) {
297  HistoName = "NStubs_Disc-" + std::to_string(i + 1);
298  // TTStub Endcap stack
299  Stub_Endcap_Ring_Bw[i] = iBooker.book1D(HistoName,
300  HistoName,
301  psTTStub_ECRing.getParameter<int32_t>("Nbinsx"),
302  psTTStub_ECRing.getParameter<double>("xmin"),
303  psTTStub_ECRing.getParameter<double>("xmax"));
304  Stub_Endcap_Ring_Bw[i]->setAxisTitle("Endcap Ring", 1);
305  Stub_Endcap_Ring_Bw[i]->setAxisTitle("# L1 Stubs ", 2);
306  }
307 
308  // TTStub displ/offset
309  edm::ParameterSet psTTStub_Barrel_2D = conf_.getParameter<edm::ParameterSet>("TH2TTStub_DisOf_Layer");
310  edm::ParameterSet psTTStub_ECDisc_2D = conf_.getParameter<edm::ParameterSet>("TH2TTStub_DisOf_Disc");
311  edm::ParameterSet psTTStub_ECRing_2D = conf_.getParameter<edm::ParameterSet>("TH2TTStub_DisOf_Ring");
312 
313  iBooker.setCurrentFolder(topFolderName_ + "/Stubs/Width");
314  HistoName = "Stub_Width_Barrel";
315  Stub_Barrel_W = iBooker.book2D(HistoName,
316  HistoName,
317  psTTStub_Barrel_2D.getParameter<int32_t>("Nbinsx"),
318  psTTStub_Barrel_2D.getParameter<double>("xmin"),
319  psTTStub_Barrel_2D.getParameter<double>("xmax"),
320  psTTStub_Barrel_2D.getParameter<int32_t>("Nbinsy"),
321  psTTStub_Barrel_2D.getParameter<double>("ymin"),
322  psTTStub_Barrel_2D.getParameter<double>("ymax"));
323  Stub_Barrel_W->setAxisTitle("Barrel Layer", 1);
324  Stub_Barrel_W->setAxisTitle("Displacement - Offset", 2);
325 
326  HistoName = "Stub_Width_Endcap_Disc";
327  Stub_Endcap_Disc_W = iBooker.book2D(HistoName,
328  HistoName,
329  psTTStub_ECDisc_2D.getParameter<int32_t>("Nbinsx"),
330  psTTStub_ECDisc_2D.getParameter<double>("xmin"),
331  psTTStub_ECDisc_2D.getParameter<double>("xmax"),
332  psTTStub_ECDisc_2D.getParameter<int32_t>("Nbinsy"),
333  psTTStub_ECDisc_2D.getParameter<double>("ymin"),
334  psTTStub_ECDisc_2D.getParameter<double>("ymax"));
335  Stub_Endcap_Disc_W->setAxisTitle("Endcap Disc", 1);
336  Stub_Endcap_Disc_W->setAxisTitle("Displacement - Offset", 2);
337 
338  HistoName = "Stub_Width_Endcap_Ring";
339  Stub_Endcap_Ring_W = iBooker.book2D(HistoName,
340  HistoName,
341  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
342  psTTStub_ECRing_2D.getParameter<double>("xmin"),
343  psTTStub_ECRing_2D.getParameter<double>("xmax"),
344  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
345  psTTStub_ECRing_2D.getParameter<double>("ymin"),
346  psTTStub_ECRing_2D.getParameter<double>("ymax"));
347  Stub_Endcap_Ring_W->setAxisTitle("Endcap Ring", 1);
348  Stub_Endcap_Ring_W->setAxisTitle("Trigger Offset", 2);
349 
350  for (int i = 0; i < numDiscs; i++) {
351  HistoName = "Stub_Width_Disc+" + std::to_string(i + 1);
352  Stub_Endcap_Ring_W_Fw[i] = iBooker.book2D(HistoName,
353  HistoName,
354  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
355  psTTStub_ECRing_2D.getParameter<double>("xmin"),
356  psTTStub_ECRing_2D.getParameter<double>("xmax"),
357  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
358  psTTStub_ECRing_2D.getParameter<double>("ymin"),
359  psTTStub_ECRing_2D.getParameter<double>("ymax"));
360  Stub_Endcap_Ring_W_Fw[i]->setAxisTitle("Endcap Ring", 1);
361  Stub_Endcap_Ring_W_Fw[i]->setAxisTitle("Displacement - Offset", 2);
362  }
363 
364  for (int i = 0; i < numDiscs; i++) {
365  HistoName = "Stub_Width_Disc-" + std::to_string(i + 1);
366  Stub_Endcap_Ring_W_Bw[i] = iBooker.book2D(HistoName,
367  HistoName,
368  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
369  psTTStub_ECRing_2D.getParameter<double>("xmin"),
370  psTTStub_ECRing_2D.getParameter<double>("xmax"),
371  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
372  psTTStub_ECRing_2D.getParameter<double>("ymin"),
373  psTTStub_ECRing_2D.getParameter<double>("ymax"));
374  Stub_Endcap_Ring_W_Bw[i]->setAxisTitle("Endcap Ring", 1);
375  Stub_Endcap_Ring_W_Bw[i]->setAxisTitle("Displacement - Offset", 2);
376  }
377 
378  iBooker.setCurrentFolder(topFolderName_ + "/Stubs/Offset");
379  HistoName = "Stub_Offset_Barrel";
380  Stub_Barrel_O = iBooker.book2D(HistoName,
381  HistoName,
382  psTTStub_Barrel_2D.getParameter<int32_t>("Nbinsx"),
383  psTTStub_Barrel_2D.getParameter<double>("xmin"),
384  psTTStub_Barrel_2D.getParameter<double>("xmax"),
385  psTTStub_Barrel_2D.getParameter<int32_t>("Nbinsy"),
386  psTTStub_Barrel_2D.getParameter<double>("ymin"),
387  psTTStub_Barrel_2D.getParameter<double>("ymax"));
388  Stub_Barrel_O->setAxisTitle("Barrel Layer", 1);
389  Stub_Barrel_O->setAxisTitle("Trigger Offset", 2);
390 
391  HistoName = "Stub_Offset_Endcap_Disc";
392  Stub_Endcap_Disc_O = iBooker.book2D(HistoName,
393  HistoName,
394  psTTStub_ECDisc_2D.getParameter<int32_t>("Nbinsx"),
395  psTTStub_ECDisc_2D.getParameter<double>("xmin"),
396  psTTStub_ECDisc_2D.getParameter<double>("xmax"),
397  psTTStub_ECDisc_2D.getParameter<int32_t>("Nbinsy"),
398  psTTStub_ECDisc_2D.getParameter<double>("ymin"),
399  psTTStub_ECDisc_2D.getParameter<double>("ymax"));
400  Stub_Endcap_Disc_O->setAxisTitle("Endcap Disc", 1);
401  Stub_Endcap_Disc_O->setAxisTitle("Trigger Offset", 2);
402 
403  HistoName = "Stub_Offset_Endcap_Ring";
404  Stub_Endcap_Ring_O = iBooker.book2D(HistoName,
405  HistoName,
406  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
407  psTTStub_ECRing_2D.getParameter<double>("xmin"),
408  psTTStub_ECRing_2D.getParameter<double>("xmax"),
409  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
410  psTTStub_ECRing_2D.getParameter<double>("ymin"),
411  psTTStub_ECRing_2D.getParameter<double>("ymax"));
412  Stub_Endcap_Ring_O->setAxisTitle("Endcap Ring", 1);
413  Stub_Endcap_Ring_O->setAxisTitle("Trigger Offset", 2);
414 
415  for (int i = 0; i < numDiscs; i++) {
416  HistoName = "Stub_Offset_Disc+" + std::to_string(i + 1);
417  Stub_Endcap_Ring_O_Fw[i] = iBooker.book2D(HistoName,
418  HistoName,
419  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
420  psTTStub_ECRing_2D.getParameter<double>("xmin"),
421  psTTStub_ECRing_2D.getParameter<double>("xmax"),
422  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
423  psTTStub_ECRing_2D.getParameter<double>("ymin"),
424  psTTStub_ECRing_2D.getParameter<double>("ymax"));
425  Stub_Endcap_Ring_O_Fw[i]->setAxisTitle("Endcap Ring", 1);
426  Stub_Endcap_Ring_O_Fw[i]->setAxisTitle("Trigger Offset", 2);
427  }
428 
429  for (int i = 0; i < numDiscs; i++) {
430  HistoName = "Stub_Offset_Disc-" + std::to_string(i + 1);
431  Stub_Endcap_Ring_O_Bw[i] = iBooker.book2D(HistoName,
432  HistoName,
433  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
434  psTTStub_ECRing_2D.getParameter<double>("xmin"),
435  psTTStub_ECRing_2D.getParameter<double>("xmax"),
436  psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
437  psTTStub_ECRing_2D.getParameter<double>("ymin"),
438  psTTStub_ECRing_2D.getParameter<double>("ymax"));
439  Stub_Endcap_Ring_O_Bw[i]->setAxisTitle("Endcap Ring", 1);
440  Stub_Endcap_Ring_O_Bw[i]->setAxisTitle("Trigger Offset", 2);
441  }
442 }

References dqm::implementation::IBooker::book1D(), dqm::implementation::IBooker::book2D(), conf_, edm::ParameterSet::getParameter(), mps_fire::i, dqm::impl::MonitorElement::setAxisTitle(), dqm::implementation::NavigatorBase::setCurrentFolder(), AlCaHLTBitMon_QueryRunRegistry::string, Stub_Barrel, Stub_Barrel_O, Stub_Barrel_W, Stub_Barrel_XY, Stub_Endcap_Bw_XY, Stub_Endcap_Disc, Stub_Endcap_Disc_Bw, Stub_Endcap_Disc_Fw, Stub_Endcap_Disc_O, Stub_Endcap_Disc_W, Stub_Endcap_Fw_XY, Stub_Endcap_Ring, Stub_Endcap_Ring_Bw, Stub_Endcap_Ring_Fw, Stub_Endcap_Ring_O, Stub_Endcap_Ring_O_Bw, Stub_Endcap_Ring_O_Fw, Stub_Endcap_Ring_W, Stub_Endcap_Ring_W_Bw, Stub_Endcap_Ring_W_Fw, Stub_Eta, Stub_Phi, Stub_R, Stub_RZ, and topFolderName_.

Member Data Documentation

◆ conf_

edm::ParameterSet OuterTrackerMonitorTTStub::conf_
private

Definition at line 61 of file OuterTrackerMonitorTTStub.h.

Referenced by bookHistograms(), and OuterTrackerMonitorTTStub().

◆ Stub_Barrel

MonitorElement* OuterTrackerMonitorTTStub::Stub_Barrel = nullptr

Definition at line 33 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Barrel_O

MonitorElement* OuterTrackerMonitorTTStub::Stub_Barrel_O = nullptr

Definition at line 48 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Barrel_W

MonitorElement* OuterTrackerMonitorTTStub::Stub_Barrel_W = nullptr

Definition at line 47 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Barrel_XY

MonitorElement* OuterTrackerMonitorTTStub::Stub_Barrel_XY = nullptr

Definition at line 27 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Bw_XY

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Bw_XY = nullptr

Definition at line 29 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Disc

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Disc = nullptr

Definition at line 34 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Disc_Bw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Disc_Bw = nullptr

Definition at line 36 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Disc_Fw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Disc_Fw = nullptr

Definition at line 35 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Disc_O

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Disc_O = nullptr

Definition at line 50 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Disc_W

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Disc_W = nullptr

Definition at line 49 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Fw_XY

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Fw_XY = nullptr

Definition at line 28 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring = nullptr

Definition at line 37 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_Bw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_Bw[5] = {nullptr, nullptr, nullptr, nullptr, nullptr}

Definition at line 39 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_Fw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_Fw[5] = {nullptr, nullptr, nullptr, nullptr, nullptr}

Definition at line 38 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_O

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_O = nullptr

Definition at line 52 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_O_Bw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_O_Bw[5] = {nullptr, nullptr, nullptr, nullptr, nullptr}

Definition at line 58 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_O_Fw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_O_Fw[5] = {nullptr, nullptr, nullptr, nullptr, nullptr}

Definition at line 55 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_W

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_W = nullptr

Definition at line 51 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_W_Bw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_W_Bw[5]
Initial value:
= {
nullptr, nullptr, nullptr, nullptr, nullptr}

Definition at line 56 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Endcap_Ring_W_Fw

MonitorElement* OuterTrackerMonitorTTStub::Stub_Endcap_Ring_W_Fw[5]
Initial value:
= {
nullptr, nullptr, nullptr, nullptr, nullptr}

Definition at line 53 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Eta

MonitorElement* OuterTrackerMonitorTTStub::Stub_Eta = nullptr

Definition at line 42 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_Phi

MonitorElement* OuterTrackerMonitorTTStub::Stub_Phi = nullptr

Definition at line 43 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_R

MonitorElement* OuterTrackerMonitorTTStub::Stub_R = nullptr

Definition at line 44 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ Stub_RZ

MonitorElement* OuterTrackerMonitorTTStub::Stub_RZ = nullptr

Definition at line 30 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and bookHistograms().

◆ tagTTStubsToken_

edm::EDGetTokenT<edmNew::DetSetVector<TTStub<Ref_Phase2TrackerDigi_> > > OuterTrackerMonitorTTStub::tagTTStubsToken_
private

Definition at line 62 of file OuterTrackerMonitorTTStub.h.

Referenced by analyze(), and OuterTrackerMonitorTTStub().

◆ topFolderName_

std::string OuterTrackerMonitorTTStub::topFolderName_
private

Definition at line 63 of file OuterTrackerMonitorTTStub.h.

Referenced by bookHistograms(), and OuterTrackerMonitorTTStub().

OuterTrackerMonitorTTStub::Stub_Endcap_Ring_W_Bw
MonitorElement * Stub_Endcap_Ring_W_Bw[5]
Definition: OuterTrackerMonitorTTStub.h:56
TrackerGeometry::idToDet
const TrackerGeomDet * idToDet(DetId) const override
Definition: TrackerGeometry.cc:193
edm::ESHandle::product
T const * product() const
Definition: ESHandle.h:86
Point2DBase
Definition: Point2DBase.h:9
mps_fire.i
i
Definition: mps_fire.py:355
OuterTrackerMonitorTTStub::tagTTStubsToken_
edm::EDGetTokenT< edmNew::DetSetVector< TTStub< Ref_Phase2TrackerDigi_ > > > tagTTStubsToken_
Definition: OuterTrackerMonitorTTStub.h:62
GeomDet
Definition: GeomDet.h:27
PV3DBase::x
T x() const
Definition: PV3DBase.h:59
TrackerTopology
Definition: TrackerTopology.h:16
OuterTrackerMonitorTTStub::Stub_Endcap_Disc
MonitorElement * Stub_Endcap_Disc
Definition: OuterTrackerMonitorTTStub.h:34
OuterTrackerMonitorTTStub::Stub_R
MonitorElement * Stub_R
Definition: OuterTrackerMonitorTTStub.h:44
edmNew::makeRefTo
edm::Ref< typename HandleT::element_type, typename HandleT::element_type::value_type::value_type > makeRefTo(const HandleT &iHandle, typename HandleT::element_type::value_type::const_iterator itIter)
Definition: DetSetVectorNew.h:735
OuterTrackerMonitorTTStub::Stub_Barrel_O
MonitorElement * Stub_Barrel_O
Definition: OuterTrackerMonitorTTStub.h:48
OuterTrackerMonitorTTStub::Stub_Endcap_Ring_O_Bw
MonitorElement * Stub_Endcap_Ring_O_Bw[5]
Definition: OuterTrackerMonitorTTStub.h:58
TrackerTopology::layer
unsigned int layer(const DetId &id) const
Definition: TrackerTopology.cc:47
GeomDet::topology
virtual const Topology & topology() const
Definition: GeomDet.cc:67
edmNew::DetSetVector::begin
const_iterator begin(bool update=false) const
Definition: DetSetVectorNew.h:572
Topology::localPosition
virtual LocalPoint localPosition(const MeasurementPoint &) const =0
OuterTrackerMonitorTTStub::Stub_Barrel_XY
MonitorElement * Stub_Barrel_XY
Definition: OuterTrackerMonitorTTStub.h:27
OuterTrackerMonitorTTStub::Stub_Endcap_Fw_XY
MonitorElement * Stub_Endcap_Fw_XY
Definition: OuterTrackerMonitorTTStub.h:28
edm::Handle
Definition: AssociativeIterator.h:50
TtSemiLepEvtBuilder_cfi.disc
disc
Definition: TtSemiLepEvtBuilder_cfi.py:60
TrackerTopology::tidRing
unsigned int tidRing(const DetId &id) const
Definition: TrackerTopology.h:218
edm::Ref
Definition: AssociativeIterator.h:58
PV3DBase::z
T z() const
Definition: PV3DBase.h:61
OuterTrackerMonitorTTStub::conf_
edm::ParameterSet conf_
Definition: OuterTrackerMonitorTTStub.h:61
DetId
Definition: DetId.h:17
GeomDet::surface
const Plane & surface() const
The nominal surface of the GeomDet.
Definition: GeomDet.h:37
edm::EventSetup::get
T get() const
Definition: EventSetup.h:73
TrackerDigiGeometryRecord
Definition: TrackerDigiGeometryRecord.h:15
dqm::impl::MonitorElement::Fill
void Fill(long long x)
Definition: MonitorElement.h:290
TTStub
Class to store the L1 Track Trigger stubs.
Definition: TTStub.h:22
Surface::toGlobal
GlobalPoint toGlobal(const Point2DBase< Scalar, LocalTag > lp) const
Definition: Surface.h:79
edm::ESHandle< TrackerTopology >
OuterTrackerMonitorTTStub::Stub_Phi
MonitorElement * Stub_Phi
Definition: OuterTrackerMonitorTTStub.h:43
edmNew::DetSet
Definition: DetSetNew.h:22
OuterTrackerMonitorTTStub::topFolderName_
std::string topFolderName_
Definition: OuterTrackerMonitorTTStub.h:63
Point3DBase< float, GlobalTag >
OuterTrackerMonitorTTStub::Stub_RZ
MonitorElement * Stub_RZ
Definition: OuterTrackerMonitorTTStub.h:30
DetId::subdetId
constexpr int subdetId() const
get the contents of the subdetector field (not cast into any detector's numbering enum)
Definition: DetId.h:48
AlCaHLTBitMon_QueryRunRegistry.string
string
Definition: AlCaHLTBitMon_QueryRunRegistry.py:256
OuterTrackerMonitorTTStub::Stub_Endcap_Ring
MonitorElement * Stub_Endcap_Ring
Definition: OuterTrackerMonitorTTStub.h:37
OuterTrackerMonitorTTStub::Stub_Endcap_Disc_Bw
MonitorElement * Stub_Endcap_Disc_Bw
Definition: OuterTrackerMonitorTTStub.h:36
edm::ParameterSet
Definition: ParameterSet.h:36
OuterTrackerMonitorTTStub::Stub_Endcap_Disc_W
MonitorElement * Stub_Endcap_Disc_W
Definition: OuterTrackerMonitorTTStub.h:49
PV3DBase::eta
T eta() const
Definition: PV3DBase.h:73
PV3DBase::y
T y() const
Definition: PV3DBase.h:60
OuterTrackerMonitorTTStub::Stub_Endcap_Ring_Bw
MonitorElement * Stub_Endcap_Ring_Bw[5]
Definition: OuterTrackerMonitorTTStub.h:39
iEvent
int iEvent
Definition: GenABIO.cc:224
cscdqm::HistoName
std::string HistoName
Definition: CSCDQM_HistoDef.h:32
OuterTrackerMonitorTTStub::Stub_Endcap_Ring_W
MonitorElement * Stub_Endcap_Ring_W
Definition: OuterTrackerMonitorTTStub.h:51
get
#define get
OuterTrackerMonitorTTStub::Stub_Eta
MonitorElement * Stub_Eta
Definition: OuterTrackerMonitorTTStub.h:42
OuterTrackerMonitorTTStub::Stub_Endcap_Ring_O
MonitorElement * Stub_Endcap_Ring_O
Definition: OuterTrackerMonitorTTStub.h:52
OuterTrackerMonitorTTStub::Stub_Endcap_Ring_W_Fw
MonitorElement * Stub_Endcap_Ring_W_Fw[5]
Definition: OuterTrackerMonitorTTStub.h:53
edm::ParameterSet::getParameter
T getParameter(std::string const &) const
edmNew::DetSetVector
Definition: DetSetNew.h:13
OuterTrackerMonitorTTStub::Stub_Endcap_Bw_XY
MonitorElement * Stub_Endcap_Bw_XY
Definition: OuterTrackerMonitorTTStub.h:29
edmNew::DetSetVector::end
const_iterator end(bool update=false) const
Definition: DetSetVectorNew.h:577
OuterTrackerMonitorTTStub::Stub_Endcap_Disc_O
MonitorElement * Stub_Endcap_Disc_O
Definition: OuterTrackerMonitorTTStub.h:50
OuterTrackerMonitorTTStub::Stub_Endcap_Ring_Fw
MonitorElement * Stub_Endcap_Ring_Fw[5]
Definition: OuterTrackerMonitorTTStub.h:38
relativeConstraints.ring
ring
Definition: relativeConstraints.py:68
StripSubdetector::TOB
static constexpr auto TOB
Definition: StripSubdetector.h:18
TrackerTopologyRcd
Definition: TrackerTopologyRcd.h:10
OuterTrackerMonitorTTStub::Stub_Endcap_Disc_Fw
MonitorElement * Stub_Endcap_Disc_Fw
Definition: OuterTrackerMonitorTTStub.h:35
edm::HandleBase::isValid
bool isValid() const
Definition: HandleBase.h:70
dqm::impl::MonitorElement::setAxisTitle
virtual void setAxisTitle(const std::string &title, int axis=1)
set x-, y- or z-axis title (axis=1, 2, 3 respectively)
Definition: MonitorElement.cc:800
PV3DBase::perp
T perp() const
Definition: PV3DBase.h:69
edm::InputTag
Definition: InputTag.h:15
PV3DBase::phi
Geom::Phi< T > phi() const
Definition: PV3DBase.h:66
StripSubdetector::TID
static constexpr auto TID
Definition: StripSubdetector.h:17
OuterTrackerMonitorTTStub::Stub_Barrel_W
MonitorElement * Stub_Barrel_W
Definition: OuterTrackerMonitorTTStub.h:47
TrackerGeometry
Definition: TrackerGeometry.h:14
OuterTrackerMonitorTTStub::Stub_Endcap_Ring_O_Fw
MonitorElement * Stub_Endcap_Ring_O_Fw[5]
Definition: OuterTrackerMonitorTTStub.h:55
OuterTrackerMonitorTTStub::Stub_Barrel
MonitorElement * Stub_Barrel
Definition: OuterTrackerMonitorTTStub.h:33
Generated for CMSSW Reference Manual by doxygen 1.8.16