TrajectoryAtInvalidHit.cc

Go to the documentation of this file.

#include "CalibTracker/SiStripHitEfficiency/interface/TrajectoryAtInvalidHit.h"
#include "TrackingTools/TrackFitters/interface/TrajectoryStateCombiner.h"
#include "TrackingTools/TrajectoryState/interface/TrajectoryStateOnSurface.h"
#include "TrackingTools/TrajectoryState/interface/TrajectoryStateTransform.h"
#include "Geometry/CommonDetUnit/interface/GeomDet.h"
#include "Geometry/CommonTopologies/interface/StripTopology.h"
#include "Geometry/CommonTopologies/interface/PixelTopology.h"
#include "DataFormats/GeometryCommonDetAlgo/interface/MeasurementError.h"
#include "DataFormats/GeometryCommonDetAlgo/interface/MeasurementVector.h"
#include "DataFormats/SiStripDetId/interface/StripSubdetector.h"
#include "DataFormats/TrackerCommon/interface/TrackerTopology.h"
#include "Geometry/CommonDetUnit/interface/GluedGeomDet.h"
// #include "RecoTracker/MeasurementDet/interface/RecHitPropagator.h"
#include "TrackingTools/TransientTrackingRecHit/interface/TrackingRecHitProjector.h"
#include "RecoTracker/TransientTrackingRecHit/interface/ProjectedRecHit2D.h"
 
using namespace std;
TrajectoryAtInvalidHit::TrajectoryAtInvalidHit(const TrajectoryMeasurement& tm,
                                               const TrackerTopology* tTopo,
                                               const TrackerGeometry* tracker,
                                               const Propagator& propagator,
                                               const unsigned int mono) {
  if (tm.backwardPredictedState().isValid())
    theCombinedPredictedState =
        TrajectoryStateCombiner().combine(tm.forwardPredictedState(), tm.backwardPredictedState());
  else
    theCombinedPredictedState = tm.forwardPredictedState();
 
  if (!theCombinedPredictedState.isValid()) {
    return;
  }
  theHit = tm.recHit();
  iidd = theHit->geographicalId().rawId();
  StripSubdetector strip = StripSubdetector(iidd);
  unsigned int subid = strip.subdetId();
  // xB and yB are for absolute borders on the trajectories included in the study, sigmaX sigmaY are
  // significance cuts on the distance from the detector surface
  float xB = 0.;
  float sigmaX = 5.0;
  float yB = 0.;
  float sigmaY = 5.0;
  float sigmaYBond = 0.;
  //set bounds for point to be within to be counted in the study
  if (subid == StripSubdetector::TOB) {
    sigmaYBond = 5.0;
  }
  const GeomDetUnit* monodet;
 
  // if module is from a double sided layer, write out info for either the
  // rphi surface (mono = 1) or the stereo surface (mono = 2)--not the matched hit surface
  if ((mono > 0) && isDoubleSided(iidd, tTopo)) {
    // find matched det id, that is the matched hit surface between the two sensors
    unsigned int matched_iidd = iidd - (iidd & 0x3);
    DetId matched_id(matched_iidd);
 
    const GluedGeomDet* gdet = static_cast<const GluedGeomDet*>(tracker->idToDet(matched_id));
 
    // get the sensor det indicated by mono
    if (mono == 1)
      monodet = gdet->stereoDet();
    else
      monodet = gdet->monoDet();  // this should only be mono == 2
 
    // set theCombinedPredictedState to be on the sensor surface, not the matched surface
    DetId mono_id = monodet->geographicalId();
    const Surface& surface = tracker->idToDet(mono_id)->surface();
    theCombinedPredictedState = propagator.propagate(theCombinedPredictedState, surface);
 
    if (!theCombinedPredictedState.isValid()) {
      cout << "found invalid combinedpredictedstate after propagation" << endl;
      return;
    }
 
    //check if hit on trajectory is valid for this sensor
    if ((iidd & 0x3) == 0) {
      // passed id is on matched surface (ie neither rphi, nor stereo surface)
      // so the rechits on both sensors should be invalid
      hasValidHit = theHit->isValid();
      //cout << "should always be invalid = " << theHit->isValid() << endl;
    } else {
      if (iidd == mono_id) {
        //mono sensor for this TrajAtInvalidHit is same as originally passed in from trajectory
        //normally should only happen for valid hits, but sometimes is invalid
        hasValidHit = theHit->isValid();
        //cout << "check always true = " << theHit->isValid() << endl;
      } else {
        // mono sensor for this TrajAtInvalidHit is not as originally passed in from trajectory
        // so this is a partner missing from the trajectory and is thus invalid
        hasValidHit = false;
        //cout << "setting invalid by fiat" << endl;
      }
    }
 
    //set module id to be mono det
    iidd = monodet->geographicalId().rawId();
  } else {
    monodet = theHit->det();
    hasValidHit = theHit->isValid();
  }
 
  locX = theCombinedPredictedState.localPosition().x();
  locY = theCombinedPredictedState.localPosition().y();
  locZ = theCombinedPredictedState.localPosition().z();
  locXError = sqrt(theCombinedPredictedState.localError().positionError().xx());
  locYError = sqrt(theCombinedPredictedState.localError().positionError().yy());
  locDxDz = theCombinedPredictedState.localParameters().vector()[1];
  locDyDz = theCombinedPredictedState.localParameters().vector()[2];
  globX = theCombinedPredictedState.globalPosition().x();
  globY = theCombinedPredictedState.globalPosition().y();
  globZ = theCombinedPredictedState.globalPosition().z();
 
  // this should never be a glued det, only rphi or stero
  //cout << "From TrajAtValidHit module " << iidd << "   matched/stereo/rphi = " << ((iidd & 0x3)==0) << "/" << ((iidd & 0x3)==1) << "/" << ((iidd & 0x3)==2) << endl;
 
  // Restrict the bound regions for better understanding of the modul assignment.
 
  LocalPoint BoundedPoint;
  float xx, yy, zz;
 
  // Insert the bounded values
  if (locX < 0.)
    xx = min(locX - xB, locX - sigmaX * locXError);
  else
    xx = max(locX + xB, locX + sigmaX * locXError);
 
  if (locY < 0.)
    yy = min(locY - yB, locY - sigmaY * locYError);
  else
    yy = max(locY + yB, locY + sigmaY * locYError);
 
  zz = theCombinedPredictedState.localPosition().z();
 
  BoundedPoint = LocalPoint(xx, yy, zz);
 
  if (monodet->surface().bounds().inside(BoundedPoint) && abs(locY) > sigmaYBond * locYError) {
    acceptance = true;
  } else {
    // hit is within xB, yB from the edge of the detector, so throw it out
    acceptance = false;
  }
}
 
double TrajectoryAtInvalidHit::localX() const { return locX; }
double TrajectoryAtInvalidHit::localY() const { return locY; }
double TrajectoryAtInvalidHit::localZ() const { return locZ; }
double TrajectoryAtInvalidHit::localErrorX() const { return locXError; }
double TrajectoryAtInvalidHit::localErrorY() const { return locYError; }
double TrajectoryAtInvalidHit::localDxDz() const { return locDxDz; }
double TrajectoryAtInvalidHit::localDyDz() const { return locDyDz; }
double TrajectoryAtInvalidHit::globalX() const { return globX; }
double TrajectoryAtInvalidHit::globalY() const { return globY; }
double TrajectoryAtInvalidHit::globalZ() const { return globZ; }
 
unsigned int TrajectoryAtInvalidHit::monodet_id() const { return iidd; }
 
bool TrajectoryAtInvalidHit::withinAcceptance() const { return acceptance; }
 
bool TrajectoryAtInvalidHit::validHit() const { return hasValidHit; }
 
bool TrajectoryAtInvalidHit::isDoubleSided(unsigned int iidd, const TrackerTopology* tTopo) const {
  StripSubdetector strip = StripSubdetector(iidd);
  unsigned int subid = strip.subdetId();
  unsigned int layer = 0;
  if (subid == StripSubdetector::TIB) {
    layer = tTopo->tibLayer(iidd);
    if (layer == 1 || layer == 2)
      return true;
    else
      return false;
  } else if (subid == StripSubdetector::TOB) {
    layer = tTopo->tobLayer(iidd) + 4;
    if (layer == 5 || layer == 6)
      return true;
    else
      return false;
  } else if (subid == StripSubdetector::TID) {
    layer = tTopo->tidRing(iidd) + 10;
    if (layer == 11 || layer == 12)
      return true;
    else
      return false;
  } else if (subid == StripSubdetector::TEC) {
    layer = tTopo->tecRing(iidd) + 13;
    if (layer == 14 || layer == 15 || layer == 18)
      return true;
    else
      return false;
  } else
    return false;
}
 
TrajectoryStateOnSurface TrajectoryAtInvalidHit::tsos() const { return theCombinedPredictedState; }