LaserBeamsBarrel.cc

Go to the documentation of this file.

 
#include "Alignment/LaserAlignmentSimulation/interface/LaserBeamsBarrel.h"
 
#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include "FWCore/ServiceRegistry/interface/Service.h"
#include "FWCore/Utilities/interface/RandomNumberGenerator.h"
 
#include "CLHEP/Random/RandGaussQ.h"
#include "G4ParticleDefinition.hh"
#include "G4ParticleGun.hh"
#include "G4SystemOfUnits.hh"
#include "globals.hh"  // Global Constants and typedefs
 
LaserBeamsBarrel::LaserBeamsBarrel() : theParticleGun(nullptr), theDRand48Engine(nullptr) {
  G4int nPhotonsGun = 1;
  G4int nPhotonsBeam = 1;
  G4double Energy = 1.15 * eV;
  // call constructor with options
  LaserBeamsBarrel(nPhotonsGun, nPhotonsBeam, Energy);
}
 
LaserBeamsBarrel::LaserBeamsBarrel(G4int nPhotonsInGun, G4int nPhotonsInBeam, G4double PhotonEnergy)
    : thenParticleInGun(0), thenParticle(0), thePhotonEnergy(0), theParticleGun(), theDRand48Engine() {
  /* *********************************************************************** */
  /*  initialize and configure the particle gun                              */
  /* *********************************************************************** */
 
  // the Photon energy
  thePhotonEnergy = PhotonEnergy;
 
  // number of particles in the Laser beam
  thenParticleInGun = nPhotonsInGun;
 
  // number of particles in one beam. ATTENTION: each beam contains
  // nParticleInGun with the same startpoint and direction. nParticle gives the
  // number of particles in the beam with a different startpoint. They are used
  // to simulate the gaussian beamprofile of the Laser Beams.
  thenParticle = nPhotonsInBeam;
 
  // create the particle gun
  theParticleGun = new G4ParticleGun(thenParticleInGun);
 
  // default kinematics
  G4ParticleTable *theParticleTable = G4ParticleTable::GetParticleTable();
  G4ParticleDefinition *theOpticalPhoton = theParticleTable->FindParticle("opticalphoton");
 
  theParticleGun->SetParticleDefinition(theOpticalPhoton);
  theParticleGun->SetParticleTime(0.0 * ns);
  theParticleGun->SetParticlePosition(G4ThreeVector(-500.0 * cm, 0.0 * cm, 0.0 * cm));
  theParticleGun->SetParticleMomentumDirection(G4ThreeVector(5.0, 3.0, 0.0));
  theParticleGun->SetParticleEnergy(10.0 * keV);
  setOptPhotonPolar(90.0);
 
  // initialize the random number engine
  theDRand48Engine = new CLHEP::DRand48Engine();
}
 
LaserBeamsBarrel::~LaserBeamsBarrel() {
  if (theParticleGun != nullptr) {
    delete theParticleGun;
  }
  if (theDRand48Engine != nullptr) {
    delete theDRand48Engine;
  }
}
 
void LaserBeamsBarrel::GeneratePrimaries(G4Event *myEvent) {
  // this function is called at the beginning of an Event in
  // LaserAlignment::upDate(const BeginOfEvent * myEvent)
 
  // use the random number generator service of the framework
  edm::Service<edm::RandomNumberGenerator> rng;
  unsigned int seed = rng->mySeed();
 
  // set the seed
  theDRand48Engine->setSeed(seed);
 
  // number of LaserBeams
  const G4int nLaserBeams = 8;
 
  // z position of the Laserdiodes (value from design drawings)
  G4double LaserPositionZ = 1137.0 * mm;
 
  // Radius of the Laser ring
  G4double LaserRingRadius = 564.0 * mm;
 
  // phi positions of the Laserdiodes (from CMS Note 2001/053 or from
  // http://abbaneo.home.cern.ch/abbaneo/cms/layout)
  G4double LaserPhi[nLaserBeams] = {G4double(7.0 / 112.0) * G4double(2.0 * M_PI),
                                    G4double(23.0 / 112.0) * G4double(2.0 * M_PI),
                                    G4double(33.0 / 112.0) * G4double(2.0 * M_PI),
                                    G4double(49.0 / 112.0) * G4double(2.0 * M_PI),
                                    G4double(65.0 / 112.0) * G4double(2.0 * M_PI),
                                    G4double(77.0 / 112.0) * G4double(2.0 * M_PI),
                                    G4double(93.0 / 112.0) * G4double(2.0 * M_PI),
                                    G4double(103.0 / 112.0) * G4double(2.0 * M_PI)};
 
  // width of the LaserBeams
  G4double LaserBeamSigmaX = 0.5 * mm;
  G4double LaserBeamSigmaY = 0.5 * mm;
 
  // get the definition of the optical photon
  G4ParticleTable *theParticleTable = G4ParticleTable::GetParticleTable();
  G4ParticleDefinition *theOpticalPhoton = theParticleTable->FindParticle("opticalphoton");
 
  // loop over the LaserBeams
  for (int theBeam = 0; theBeam < nLaserBeams; theBeam++) {
    // code for forward and backward beam
    // calculate x and y position of the current laser diode
    G4double LaserPositionX = cos(LaserPhi[theBeam]) * LaserRingRadius;
    G4double LaserPositionY = sin(LaserPhi[theBeam]) * LaserRingRadius;
 
    // loop over all the particles in one beam
    for (int theParticle = 0; theParticle < thenParticle; theParticle++) {
      // get randomnumbers  and calculate the position
      CLHEP::RandGaussQ aGaussObjX(*theDRand48Engine, LaserPositionX, LaserBeamSigmaX);
      CLHEP::RandGaussQ aGaussObjY(*theDRand48Engine, LaserPositionY, LaserBeamSigmaY);
 
      G4double theXPosition = aGaussObjX.fire();
      G4double theYPosition = aGaussObjY.fire();
      G4double theZPosition = LaserPositionZ;
 
      // set the properties of the newly created particle
      theParticleGun->SetParticleDefinition(theOpticalPhoton);
      theParticleGun->SetParticleTime(0.0 * ns);
      theParticleGun->SetParticlePosition(G4ThreeVector(theXPosition, theYPosition, theZPosition));
      theParticleGun->SetParticleEnergy(thePhotonEnergy);
 
      // loop over both directions of the beam
      for (int theDirection = 0; theDirection < 2; theDirection++) {
        // shoot in both beam directions ...
        if (theDirection == 0)  // shoot in forward direction (+z)
        {
          theParticleGun->SetParticleMomentumDirection(G4ThreeVector(0.0, 0.0, 1.0));
          // set the polarization
          setOptPhotonPolar(90.0);
          // generate the particle
          theParticleGun->GeneratePrimaryVertex(myEvent);
        } else if (theDirection == 1)  // shoot in backward direction (-z)
        {
          theParticleGun->SetParticleMomentumDirection(G4ThreeVector(0.0, 0.0, -1.0));
          // set the polarization
          setOptPhotonPolar(90.0);
          // generate the particle
          theParticleGun->GeneratePrimaryVertex(myEvent);
        }
      }  // end looop over both beam directions
    }    // end looop over particles in beam
  }      // end loop over beams
}
 
void LaserBeamsBarrel::setOptPhotonPolar(G4double Angle) {
  /* *********************************************************************** */
  /*   to get optical processes working properly, you have to make sure      *
   *   that the photon polarisation is defined.                              */
  /* *********************************************************************** */
 
  // first check if we have an optical photon
  if (theParticleGun->GetParticleDefinition()->GetParticleName() != "opticalphoton") {
    edm::LogWarning("SimLaserAlignment:LaserBeamsBarrel")
        << "<LaserBeamsBarrel::setOptPhotonPolar()>: WARNING! The ParticleGun "
           "is not an optical photon";
    return;
  }
 
  //   G4cout << "  AC1CMS: The ParticleGun is an " <<
  //   theParticleGun->GetParticleDefinition()->GetParticleName();
  G4ThreeVector normal(1.0, 0.0, 0.0);
  G4ThreeVector kphoton = theParticleGun->GetParticleMomentumDirection();
  G4ThreeVector product = normal.cross(kphoton);
  G4double modul2 = product * product;
 
  G4ThreeVector e_perpendicular(0.0, 0.0, 1.0);
 
  if (modul2 > 0.0) {
    e_perpendicular = (1.0 / sqrt(modul2)) * product;
  }
 
  G4ThreeVector e_parallel = e_perpendicular.cross(kphoton);
 
  G4ThreeVector polar = cos(Angle) * e_parallel + sin(Angle) * e_perpendicular;
 
  //   G4cout << ", the polarization = " << polar << G4endl;
  theParticleGun->SetParticlePolarization(polar);
}