Inheritance diagram for FastTimerServiceClient:

Public Member Functions
	FastTimerServiceClient (edm::ParameterSet const &)

	~FastTimerServiceClient () override

Public Member Functions inherited from DQMEDHarvester
void	accumulate (edm::Event const &ev, edm::EventSetup const &es) final

void	beginJob () override

void	beginLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &) final

void	beginRun (edm::Run const &run, edm::EventSetup const &) override

virtual void	dqmAnalyze (DQMStore::IBooker &, DQMStore::IGetter &, edm::Event const &, edm::EventSetup const &)

	DQMEDHarvester ()

	DQMEDHarvester (edm::ParameterSet const &iConfig)

virtual void	dqmEndRun (DQMStore::IBooker &, DQMStore::IGetter &, edm::Run const &, edm::EventSetup const &)

void	endJob () final

void	endLuminosityBlock (edm::LuminosityBlock const &, edm::EventSetup const &) final

void	endLuminosityBlockProduce (edm::LuminosityBlock &lumi, edm::EventSetup const &es) final

void	endRun (edm::Run const &, edm::EventSetup const &) override

void	endRunProduce (edm::Run &run, edm::EventSetup const &es) final

	~DQMEDHarvester () override=default

Public Member Functions inherited from edm::one::EDProducer< edm::EndLuminosityBlockProducer, edm::EndRunProducer, edm::one::WatchLuminosityBlocks, edm::one::WatchRuns, edm::one::SharedResources, edm::Accumulator >
	EDProducer ()=default

SerialTaskQueue *	globalLuminosityBlocksQueue () final

SerialTaskQueue *	globalRunsQueue () final

bool	hasAbilityToProduceInBeginLumis () const final

bool	hasAbilityToProduceInBeginRuns () const final

bool	hasAbilityToProduceInEndLumis () const final

bool	hasAbilityToProduceInEndRuns () const final

bool	wantsGlobalLuminosityBlocks () const final

bool	wantsGlobalRuns () const final

Public Member Functions inherited from edm::one::EDProducerBase
	EDProducerBase ()

ModuleDescription const &	moduleDescription () const

bool	wantsStreamLuminosityBlocks () const

bool	wantsStreamRuns () const

	~EDProducerBase () override

Public Member Functions inherited from edm::ProducerBase
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)

std::vector< edm::ProductResolverIndex > const &	indiciesForPutProducts (BranchType iBranchType) const

	ProducerBase ()

std::vector< edm::ProductResolverIndex > const &	putTokenIndexToProductResolverIndex () const

std::vector< bool > const &	recordProvenanceList () const

void	registerProducts (ProducerBase , ProductRegistry , ModuleDescription const &)

std::function< void(BranchDescription const &)>	registrationCallback () const
	used by the fwk to register list of products More...

void	resolvePutIndicies (BranchType iBranchType, ModuleToResolverIndicies const &iIndicies, std::string const &moduleLabel)

TypeLabelList const &	typeLabelList () const
	used by the fwk to register the list of products of this module More...

	~ProducerBase () noexcept(false) override

Public Member Functions inherited from edm::EDConsumerBase
std::vector< ConsumesInfo >	consumesInfo () const

void	convertCurrentProcessAlias (std::string const &processName)
	Convert "@currentProcess" in InputTag process names to the actual current process name. More...

	EDConsumerBase ()

	EDConsumerBase (EDConsumerBase &&)=default

	EDConsumerBase (EDConsumerBase const &)=delete

ESProxyIndex const *	esGetTokenIndices (edm::Transition iTrans) const

ProductResolverIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const

void	itemsMayGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const

void	itemsToGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const

std::vector< ProductResolverIndexAndSkipBit > const &	itemsToGetFrom (BranchType iType) const

void	labelsForToken (EDGetToken iToken, Labels &oLabels) const

void	modulesWhoseProductsAreConsumed (std::vector< ModuleDescription const * > &modules, ProductRegistry const &preg, std::map< std::string, ModuleDescription const * > const &labelsToDesc, std::string const &processName) const

EDConsumerBase &	operator= (EDConsumerBase &&)=default

EDConsumerBase const &	operator= (EDConsumerBase const &)=delete

bool	registeredToConsume (ProductResolverIndex, bool, BranchType) const

bool	registeredToConsumeMany (TypeID const &, BranchType) const

ProductResolverIndexAndSkipBit	uncheckedIndexFrom (EDGetToken) const

void	updateLookup (BranchType iBranchType, ProductResolverIndexHelper const &, bool iPrefetchMayGet)

void	updateLookup (eventsetup::ESRecordsToProxyIndices const &)

virtual	~EDConsumerBase () noexcept(false)

Static Public Member Functions
static void	fillDescriptions (edm::ConfigurationDescriptions &descriptions)

static void	fillLumiMePSetDescription (edm::ParameterSetDescription &pset)

static void	fillPUMePSetDescription (edm::ParameterSetDescription &pset)

Static Public Member Functions inherited from edm::one::EDProducerBase
static const std::string &	baseType ()

static void	fillDescriptions (ConfigurationDescriptions &descriptions)

static void	prevalidate (ConfigurationDescriptions &descriptions)

Private Member Functions
void	dqmEndJob (DQMStore::IBooker &booker, DQMStore::IGetter &getter) override

void	dqmEndLuminosityBlock (DQMStore::IBooker &booker, DQMStore::IGetter &getter, edm::LuminosityBlock const &, edm::EventSetup const &) override

void	fillPathSummaryPlots (DQMStore::IBooker &booker, DQMStore::IGetter &getter, double events, std::string const &path)

void	fillPlotsVsLumi (DQMStore::IBooker &booker, DQMStore::IGetter &getter, std::string const &current_path, std::string const &suffix, MEPSet pset)

void	fillProcessSummaryPlots (DQMStore::IBooker &booker, DQMStore::IGetter &getter, std::string const &path)

void	fillSummaryPlots (DQMStore::IBooker &booker, DQMStore::IGetter &getter)

Static Private Member Functions
static MEPSet	getHistoPSet (const edm::ParameterSet &pset)

Private Attributes
bool	doPlotsVsPixelLumi_

bool	doPlotsVsPU_

bool	doPlotsVsScalLumi_

std::string	m_dqm_path

MEPSet	pixelLumiMEPSet_

MEPSet	puMEPSet_

MEPSet	scalLumiMEPSet_

Additional Inherited Members
Public Types inherited from DQMEDHarvester
typedef dqm::harvesting::DQMStore	DQMStore

typedef dqm::harvesting::MonitorElement	MonitorElement

Public Types inherited from edm::one::EDProducerBase
typedef EDProducerBase	ModuleType

Public Types inherited from edm::ProducerBase
using	ModuleToResolverIndicies = std::unordered_multimap< std::string, std::tuple< edm::TypeID const , const char , edm::ProductResolverIndex > >

typedef ProductRegistryHelper::TypeLabelList	TypeLabelList

Public Types inherited from edm::EDConsumerBase
typedef ProductLabels	Labels

Protected Member Functions inherited from edm::ProducerBase
template<class ProductType >
BranchAliasSetterT< ProductType >	produces ()
	declare what type of product will make and with which optional label More...

template<typename ProductType , BranchType B>
BranchAliasSetterT< ProductType >	produces ()

template<typename ProductType , Transition B>
BranchAliasSetterT< ProductType >	produces ()

BranchAliasSetter	produces (const TypeID &id, std::string instanceName=std::string(), bool recordProvenance=true)

template<BranchType B>
BranchAliasSetter	produces (const TypeID &id, std::string instanceName=std::string(), bool recordProvenance=true)

template<Transition B>
BranchAliasSetter	produces (const TypeID &id, std::string instanceName=std::string(), bool recordProvenance=true)

template<typename ProductType , Transition B>
BranchAliasSetterT< ProductType >	produces (std::string instanceName)

template<class ProductType >
BranchAliasSetterT< ProductType >	produces (std::string instanceName)

template<typename ProductType , BranchType B>
BranchAliasSetterT< ProductType >	produces (std::string instanceName)

ProducesCollector	producesCollector ()

Protected Member Functions inherited from edm::EDConsumerBase
EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)

template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)

ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...

template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()

void	consumesMany (const TypeToGet &id)

template<BranchType B>
void	consumesMany (const TypeToGet &id)

template<typename ESProduct , typename ESRecord , Transition Tr = Transition::Event>
auto	esConsumes ()

template<typename ESProduct , typename ESRecord , Transition Tr = Transition::Event>
auto	esConsumes (ESInputTag const &tag)

EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)

Protected Attributes inherited from DQMEDHarvester
DQMStore *	dqmstore_

edm::GetterOfProducts< DQMToken >	lumimegetter_

edm::EDPutTokenT< DQMToken >	lumiToken_

edm::GetterOfProducts< DQMToken >	runmegetter_

edm::EDPutTokenT< DQMToken >	runToken_

Detailed Description

Definition at line 33 of file FastTimerServiceClient.cc.

Constructor & Destructor Documentation

◆ FastTimerServiceClient()

FastTimerServiceClient::FastTimerServiceClient ( edm::ParameterSet const & config )

explicit

Definition at line 74 of file FastTimerServiceClient.cc.

     : m_dqm_path(config.getUntrackedParameter<std::string>("dqmPath")),
       doPlotsVsScalLumi_(config.getParameter<bool>("doPlotsVsScalLumi")),
       doPlotsVsPixelLumi_(config.getParameter<bool>("doPlotsVsPixelLumi")),
       doPlotsVsPU_(config.getParameter<bool>("doPlotsVsPU")),
       scalLumiMEPSet_(doPlotsVsScalLumi_ ? getHistoPSet(config.getParameter<edm::ParameterSet>("scalLumiME"))
                                          : MEPSet{}),
       pixelLumiMEPSet_(doPlotsVsPixelLumi_ ? getHistoPSet(config.getParameter<edm::ParameterSet>("pixelLumiME"))
                                            : MEPSet{}),
       puMEPSet_(doPlotsVsPU_ ? getHistoPSet(config.getParameter<edm::ParameterSet>("puME")) : MEPSet{}) {}

◆ ~FastTimerServiceClient()

FastTimerServiceClient::~FastTimerServiceClient ( )

overridedefault

Member Function Documentation

◆ dqmEndJob()

void FastTimerServiceClient::dqmEndJob	(	DQMStore::IBooker &	booker,
		DQMStore::IGetter &	getter
	)

overrideprivatevirtual

Implements DQMEDHarvester.

Definition at line 87 of file FastTimerServiceClient.cc.

                                                                                        {
   fillSummaryPlots(booker, getter);
 }

References fillSummaryPlots().

◆ dqmEndLuminosityBlock()

void FastTimerServiceClient::dqmEndLuminosityBlock	(	DQMStore::IBooker &	booker,
		DQMStore::IGetter &	getter,
		edm::LuminosityBlock const &	lumi,
		edm::EventSetup const &	setup
	)

overrideprivatevirtual

Reimplemented from DQMEDHarvester.

Definition at line 91 of file FastTimerServiceClient.cc.

                                                                                {
   fillSummaryPlots(booker, getter);
 }

References fillSummaryPlots().

◆ fillDescriptions()

void FastTimerServiceClient::fillDescriptions ( edm::ConfigurationDescriptions & descriptions )

static

Definition at line 471 of file FastTimerServiceClient.cc.

                                                                                         {
   // The following says we do not know what parameters are allowed so do no validation
   // Please change this to state exactly what you do use, even if it is no parameters
   edm::ParameterSetDescription desc;
   desc.addUntracked<std::string>("dqmPath", "HLT/TimerService");
   desc.add<bool>("doPlotsVsScalLumi", true);
   desc.add<bool>("doPlotsVsPixelLumi", false);
   desc.add<bool>("doPlotsVsPU", true);
  
   edm::ParameterSetDescription scalLumiMEPSet;
   fillLumiMePSetDescription(scalLumiMEPSet);
   desc.add<edm::ParameterSetDescription>("scalLumiME", scalLumiMEPSet);
  
   edm::ParameterSetDescription pixelLumiMEPSet;
   fillLumiMePSetDescription(pixelLumiMEPSet);
   desc.add<edm::ParameterSetDescription>("pixelLumiME", pixelLumiMEPSet);
  
   edm::ParameterSetDescription puMEPSet;
   fillPUMePSetDescription(puMEPSet);
   desc.add<edm::ParameterSetDescription>("puME", puMEPSet);
  
   descriptions.add("fastTimerServiceClient", desc);
 }

References edm::ConfigurationDescriptions::add(), edm::ParameterSetDescription::add(), edm::ParameterSetDescription::addUntracked(), fillLumiMePSetDescription(), fillPUMePSetDescription(), and AlCaHLTBitMon_QueryRunRegistry::string.

◆ fillLumiMePSetDescription()

void FastTimerServiceClient::fillLumiMePSetDescription ( edm::ParameterSetDescription & pset )

static

Definition at line 445 of file FastTimerServiceClient.cc.

                                                                                        {
   pset.add<std::string>("folder", "HLT/LumiMonitoring");
   pset.add<std::string>("name", "lumiVsLS");
   pset.add<int>("nbins", 440);
   pset.add<double>("xmin", 0.);
   pset.add<double>("xmax", 22000.);
 }

References muonDTDigis_cfi::pset, and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by fillDescriptions().

◆ fillPathSummaryPlots()

void FastTimerServiceClient::fillPathSummaryPlots	(	DQMStore::IBooker &	booker,
		DQMStore::IGetter &	getter,
		double	events,
		std::string const &	path
	)

private

Definition at line 163 of file FastTimerServiceClient.cc.

                                                                                  {
   // note: the following checks need to be kept separate, as any of these histograms might be missing
  
   booker.setCurrentFolder(current_path);
   std::vector<std::string> subsubdirs = getter.getSubdirs();
   size_t npaths = subsubdirs.size();
  
   MonitorElement* paths_time =
       booker.book1D("paths_time_real", "Total (real) time spent in each path", npaths, -0.5, double(npaths) - 0.5);
   MonitorElement* paths_thread =
       booker.book1D("paths_time_thread", "Total (thread) time spent in each path", npaths, -0.5, double(npaths) - 0.5);
   MonitorElement* paths_allocated =
       booker.book1D("paths_allocated", "Total allocated memory in each path", npaths, -0.5, double(npaths) - 0.5);
   MonitorElement* paths_deallocated =
       booker.book1D("paths_deallocated", "Total deallocated in each path", npaths, -0.5, double(npaths) - 0.5);
  
   MonitorElement* me;
   double mean = -1.;
  
   // extract the list of Paths and EndPaths from the summary plots
   int ibin = 1;
   for (auto const& subsubdir : subsubdirs) {
     std::string test = "/path ";
     if (subsubdir.find(test) == std::string::npos)
       continue;
  
     static const boost::regex prefix(current_path + "/path ");
     std::string path = boost::regex_replace(subsubdir, prefix, "");
  
     paths_time->setBinLabel(ibin, path);
     paths_thread->setBinLabel(ibin, path);
     paths_allocated->setBinLabel(ibin, path);
     paths_deallocated->setBinLabel(ibin, path);
  
     if ((me = getter.get(subsubdir + "/path time_real"))) {
       mean = me->getMean();
       paths_time->setBinContent(ibin, mean);
     }
     if ((me = getter.get(subsubdir + "/path time_thread"))) {
       mean = me->getMean();
       paths_thread->setBinContent(ibin, mean);
     }
     if ((me = getter.get(subsubdir + "/path allocated"))) {
       mean = me->getMean();
       paths_allocated->setBinContent(ibin, mean);
     }
  
     if ((me = getter.get(subsubdir + "/path deallocated"))) {
       mean = me->getMean();
       paths_deallocated->setBinContent(ibin, mean);
     }
  
     ibin++;
   }
  
   for (auto const& subsubdir : subsubdirs) {
     // for each path, fill histograms with
     //  - the average time spent in each module (total time spent in that module, averaged over all events)
     //  - the running time spent in each module (total time spent in that module, averaged over the events where that module actually ran)
     //  - the "efficiency" of each module (number of time a module succeded divided by the number of times the has run)
  
     getter.setCurrentFolder(subsubdir);
     std::vector<std::string> allmenames = getter.getMEs();
     if (allmenames.empty())
       continue;
  
     MonitorElement* me_counter = getter.get(subsubdir + "/module_counter");
     MonitorElement* me_real_total = getter.get(subsubdir + "/module_time_real_total");
     MonitorElement* me_thread_total = getter.get(subsubdir + "/module_time_thread_total");
  
     if (me_counter == nullptr or me_real_total == nullptr)
       continue;
  
     TH1D* counter = me_counter->getTH1D();
     TH1D* real_total = me_real_total->getTH1D();
     TH1D* thread_total = me_thread_total->getTH1D();
     uint32_t bins = counter->GetXaxis()->GetNbins() - 1;
     double min = counter->GetXaxis()->GetXmin();
     double max = counter->GetXaxis()->GetXmax() - 1;
  
     TH1F* real_average;
     TH1F* real_running;
     TH1F* thread_average;
     TH1F* thread_running;
     TH1F* efficiency;
     MonitorElement* me;
  
     booker.setCurrentFolder(subsubdir);
     me = getter.get("module_time_real_average");
     if (me) {
       real_average = me->getTH1F();
       assert(me->getTH1F()->GetXaxis()->GetXmin() == min);
       assert(me->getTH1F()->GetXaxis()->GetXmax() == max);
       real_average->Reset();
     } else {
       real_average = booker.book1D("module_time_real_average", "module real average timing", bins, min, max)->getTH1F();
       real_average->SetYTitle("average processing (real) time [ms]");
       for (uint32_t i = 1; i <= bins; ++i) {
         const char* module = counter->GetXaxis()->GetBinLabel(i);
         real_average->GetXaxis()->SetBinLabel(i, module);
       }
     }
  
     me = getter.get("module_time_thread_average");
     if (me) {
       thread_average = me->getTH1F();
       assert(me->getTH1F()->GetXaxis()->GetXmin() == min);
       assert(me->getTH1F()->GetXaxis()->GetXmax() == max);
       thread_average->Reset();
     } else {
       thread_average =
           booker.book1D("module_time_thread_average", "module thread average timing", bins, min, max)->getTH1F();
       thread_average->SetYTitle("average processing (thread) time [ms]");
       for (uint32_t i = 1; i <= bins; ++i) {
         const char* module = counter->GetXaxis()->GetBinLabel(i);
         thread_average->GetXaxis()->SetBinLabel(i, module);
       }
     }
  
     me = getter.get("module_time_real_running");
     if (me) {
       real_running = me->getTH1F();
       assert(me->getTH1F()->GetXaxis()->GetXmin() == min);
       assert(me->getTH1F()->GetXaxis()->GetXmax() == max);
       real_running->Reset();
     } else {
       real_running = booker.book1D("module_time_real_running", "module real running timing", bins, min, max)->getTH1F();
       real_running->SetYTitle("running processing (real) time [ms]");
       for (uint32_t i = 1; i <= bins; ++i) {
         const char* module = counter->GetXaxis()->GetBinLabel(i);
         real_running->GetXaxis()->SetBinLabel(i, module);
       }
     }
  
     me = getter.get("module_time_thread_running");
     if (me) {
       thread_running = me->getTH1F();
       assert(me->getTH1F()->GetXaxis()->GetXmin() == min);
       assert(me->getTH1F()->GetXaxis()->GetXmax() == max);
       thread_running->Reset();
     } else {
       thread_running =
           booker.book1D("module_time_thread_running", "module thread running timing", bins, min, max)->getTH1F();
       thread_running->SetYTitle("running processing (thread) time [ms]");
       for (uint32_t i = 1; i <= bins; ++i) {
         const char* module = counter->GetXaxis()->GetBinLabel(i);
         thread_running->GetXaxis()->SetBinLabel(i, module);
       }
     }
  
     me = getter.get("module_efficiency");
     if (me) {
       efficiency = me->getTH1F();
       assert(me->getTH1F()->GetXaxis()->GetXmin() == min);
       assert(me->getTH1F()->GetXaxis()->GetXmax() == max);
       efficiency->Reset();
     } else {
       efficiency = booker.book1D("module_efficiency", "module efficiency", bins, min, max)->getTH1F();
       efficiency->SetYTitle("filter efficiency");
       efficiency->SetMaximum(1.05);
       for (uint32_t i = 1; i <= bins; ++i) {
         const char* module = counter->GetXaxis()->GetBinLabel(i);
         efficiency->GetXaxis()->SetBinLabel(i, module);
       }
     }
  
     for (uint32_t i = 1; i <= bins; ++i) {
       double n = counter->GetBinContent(i);
       double p = counter->GetBinContent(i + 1);
       if (n)
         efficiency->SetBinContent(i, p / n);
  
       // real timing
       double t = real_total->GetBinContent(i);
       real_average->SetBinContent(i, t / events);
       if (n)
         real_running->SetBinContent(i, t / n);
  
       // thread timing
       t = thread_total->GetBinContent(i);
       thread_average->SetBinContent(i, t / events);
       if (n)
         thread_running->SetBinContent(i, t / n);
     }
  
     // vs lumi
     if (doPlotsVsScalLumi_)
       fillPlotsVsLumi(booker, getter, subsubdir, "VsScalLumi", scalLumiMEPSet_);
     if (doPlotsVsPixelLumi_)
       fillPlotsVsLumi(booker, getter, subsubdir, "VsPixelLumi", pixelLumiMEPSet_);
     if (doPlotsVsPU_)
       fillPlotsVsLumi(booker, getter, subsubdir, "VsPU", puMEPSet_);
   }
 }

References cms::cuda::assert(), trigObjTnPSource_cfi::bins, dqm::implementation::IBooker::book1D(), doPlotsVsPixelLumi_, doPlotsVsPU_, doPlotsVsScalLumi_, L1TObjectsTimingClient_cff::efficiency, patZpeak::events, fillPlotsVsLumi(), dqm::implementation::IGetter::get(), dqm::implementation::IGetter::getMEs(), dqm::implementation::IGetter::getSubdirs(), dqm::legacy::MonitorElement::getTH1D(), dqm::legacy::MonitorElement::getTH1F(), mps_fire::i, SiStripPI::max, hlt_dqm_clientPB-live_cfg::me, SiStripPI::mean, min(), dqmiodumpmetadata::n, or, AlCaHLTBitMon_ParallelJobs::p, castor_dqm_sourceclient_file_cfg::path, pixelLumiMEPSet_, ZMuMuAnalysisNtupler_cff::prefix, puMEPSet_, scalLumiMEPSet_, dqm::impl::MonitorElement::setBinContent(), dqm::impl::MonitorElement::setBinLabel(), dqm::implementation::NavigatorBase::setCurrentFolder(), AlCaHLTBitMon_QueryRunRegistry::string, and OrderedSet::t.

Referenced by fillProcessSummaryPlots().

◆ fillPlotsVsLumi()

void FastTimerServiceClient::fillPlotsVsLumi	(	DQMStore::IBooker &	booker,
		DQMStore::IGetter &	getter,
		std::string const &	current_path,
		std::string const &	suffix,
		MEPSet	pset
	)

private

Definition at line 362 of file FastTimerServiceClient.cc.

                                                           {
   std::vector<std::string> menames;
  
   static const boost::regex byls(".*byls");
   static const boost::regex test(suffix);
   // get all MEs in the current_path
   getter.setCurrentFolder(current_path);
   std::vector<std::string> allmenames = getter.getMEs();
   for (auto const& m : allmenames) {
     // get only MEs vs LS
     if (boost::regex_match(m, byls))
       menames.push_back(m);
   }
   // if no MEs available, return
   if (menames.empty())
     return;
  
   // get info for getting the lumi VS LS histogram
   std::string folder = pset.folder;
   std::string name = pset.name;
   int nbins = pset.nbins;
   double xmin = pset.xmin;
   double xmax = pset.xmax;
  
   // get lumi/PU VS LS ME
   getter.setCurrentFolder(folder);
   MonitorElement* lumiVsLS = getter.get(folder + "/" + name);
   // if no ME available, return
   if (!lumiVsLS) {
     edm::LogWarning("FastTimerServiceClient") << "no " << name << " ME is available in " << folder << std::endl;
     return;
   }
  
   // get range and binning for new MEs x-axis
   size_t size = lumiVsLS->getTProfile()->GetXaxis()->GetNbins();
   std::string xtitle = lumiVsLS->getTProfile()->GetYaxis()->GetTitle();
  
   std::vector<double> lumi;
   std::vector<int> LS;
   for (size_t ibin = 1; ibin <= size; ++ibin) {
     // avoid to store points w/ no info
     if (lumiVsLS->getTProfile()->GetBinContent(ibin) == 0.)
       continue;
  
     lumi.push_back(lumiVsLS->getTProfile()->GetBinContent(ibin));
     LS.push_back(lumiVsLS->getTProfile()->GetXaxis()->GetBinCenter(ibin));
   }
  
   booker.setCurrentFolder(current_path);
   getter.setCurrentFolder(current_path);
   for (auto const& m : menames) {
     std::string label = m;
     label.erase(label.find("_byls"));
  
     MonitorElement* me = getter.get(current_path + "/" + m);
     float ymin = 0.;
     float ymax = std::numeric_limits<float>::max();
     std::string ytitle = me->getTProfile()->GetYaxis()->GetTitle();
  
     MonitorElement* meVsLumi = getter.get(current_path + "/" + label + "_" + suffix);
     if (meVsLumi) {
       assert(meVsLumi->getTProfile()->GetXaxis()->GetXmin() == xmin);
       assert(meVsLumi->getTProfile()->GetXaxis()->GetXmax() == xmax);
       meVsLumi->Reset();  // do I have to do it ?!?!?
     } else {
       meVsLumi = booker.bookProfile(label + "_" + suffix, label + "_" + suffix, nbins, xmin, xmax, ymin, ymax);
       //    TProfile* meVsLumi_p = meVsLumi->getTProfile();
       meVsLumi->getTProfile()->GetXaxis()->SetTitle(xtitle.c_str());
       meVsLumi->getTProfile()->GetYaxis()->SetTitle(ytitle.c_str());
     }
     for (size_t ils = 0; ils < LS.size(); ++ils) {
       int ibin = me->getTProfile()->GetXaxis()->FindBin(LS[ils]);
       double y = me->getTProfile()->GetBinContent(ibin);
  
       meVsLumi->Fill(lumi[ils], y);
     }
   }
 }

References cms::cuda::assert(), dqm::implementation::IBooker::bookProfile(), dqm::impl::MonitorElement::Fill(), printsummarytable::folder, dqm::implementation::IGetter::get(), dqm::implementation::IGetter::getMEs(), dqm::legacy::MonitorElement::getTProfile(), label, BXlumiParameters_cfi::lumi, visualization-live-secondInstance_cfg::m, SiStripPI::max, hlt_dqm_clientPB-live_cfg::me, Skims_PA_cff::name, LaserClient_cfi::nbins, muonDTDigis_cfi::pset, dqm::impl::MonitorElement::Reset(), dqm::implementation::NavigatorBase::setCurrentFolder(), findQualityFiles::size, AlCaHLTBitMon_QueryRunRegistry::string, createPayload::suffix, ctpps_dqm_sourceclient-live_cfg::test, TrackerOfflineValidation_Dqm_cff::xmax, TrackerOfflineValidation_Dqm_cff::xmin, hgcalPlots::xtitle, y, L1TOccupancyClient_cfi::ymax, L1TOccupancyClient_cfi::ymin, and hgcalPlots::ytitle.

Referenced by fillPathSummaryPlots(), and fillProcessSummaryPlots().

◆ fillProcessSummaryPlots()

void FastTimerServiceClient::fillProcessSummaryPlots	(	DQMStore::IBooker &	booker,
		DQMStore::IGetter &	getter,
		std::string const &	path
	)

private

Definition at line 124 of file FastTimerServiceClient.cc.

                                                                                     {
   MonitorElement* me = getter.get(current_path + "/event time_real");
   if (me == nullptr)
     // no FastTimerService DQM information
     return;
  
   if (doPlotsVsScalLumi_)
     fillPlotsVsLumi(booker, getter, current_path, "VsScalLumi", scalLumiMEPSet_);
   if (doPlotsVsPixelLumi_)
     fillPlotsVsLumi(booker, getter, current_path, "VsPixelLumi", pixelLumiMEPSet_);
   if (doPlotsVsPU_)
     fillPlotsVsLumi(booker, getter, current_path, "VsPU", puMEPSet_);
  
   //  getter.setCurrentFolder(current_path);
  
   double events = me->getTH1F()->GetEntries();
  
   // look for per-process directories
   static const boost::regex process_name(".*/process .*");
  
   booker.setCurrentFolder(current_path);  // ?!?!?
   std::vector<std::string> subdirs = getter.getSubdirs();
   for (auto const& subdir : subdirs) {
     if (boost::regex_match(subdir, process_name)) {
       getter.setCurrentFolder(subdir);
       // look for per-path plots inside each per-process directory
       std::vector<std::string> subsubdirs = getter.getSubdirs();
       for (auto const& subsubdir : subsubdirs) {
         if (getter.get(subsubdir + "/path time_real")) {
           fillPathSummaryPlots(booker, getter, events, subdir);
           break;
         }
       }
     }
   }  // loop on subdir
 }

References doPlotsVsPixelLumi_, doPlotsVsPU_, doPlotsVsScalLumi_, patZpeak::events, fillPathSummaryPlots(), fillPlotsVsLumi(), dqm::implementation::IGetter::get(), dqm::implementation::IGetter::getSubdirs(), hlt_dqm_clientPB-live_cfg::me, pixelLumiMEPSet_, puMEPSet_, scalLumiMEPSet_, and dqm::implementation::NavigatorBase::setCurrentFolder().

Referenced by fillSummaryPlots().

◆ fillPUMePSetDescription()

void FastTimerServiceClient::fillPUMePSetDescription ( edm::ParameterSetDescription & pset )

static

Definition at line 453 of file FastTimerServiceClient.cc.

                                                                                      {
   pset.add<std::string>("folder", "HLT/LumiMonitoring");
   pset.add<std::string>("name", "puVsLS");
   pset.add<int>("nbins", 260);
   pset.add<double>("xmin", 0.);
   pset.add<double>("xmax", 130.);
 }

References muonDTDigis_cfi::pset, and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by fillDescriptions().

◆ fillSummaryPlots()

void FastTimerServiceClient::fillSummaryPlots	(	DQMStore::IBooker &	booker,
		DQMStore::IGetter &	getter
	)

private

Definition at line 98 of file FastTimerServiceClient.cc.

                                                                                               {
   if (getter.get(m_dqm_path + "/event time_real")) {
     // the plots are directly in the configured folder
     fillProcessSummaryPlots(booker, getter, m_dqm_path);
   } else {
     static const boost::regex running_n_processes(".*/Running .*");
  
     booker.setCurrentFolder(m_dqm_path);
     std::vector<std::string> subdirs = getter.getSubdirs();
     for (auto const& subdir : subdirs) {
       // the plots are in a per-number-of-processes folder
       if (boost::regex_match(subdir, running_n_processes)) {
         booker.setCurrentFolder(subdir);
         if (getter.get(subdir + "/event time_real"))
           fillProcessSummaryPlots(booker, getter, subdir);
  
         std::vector<std::string> subsubdirs = getter.getSubdirs();
         for (auto const& subsubdir : subsubdirs) {
           if (getter.get(subsubdir + "/event time_real"))
             fillProcessSummaryPlots(booker, getter, subsubdir);
         }
       }
     }  // loop on subdirs
   }
 }

References fillProcessSummaryPlots(), dqm::implementation::IGetter::get(), dqm::implementation::IGetter::getSubdirs(), m_dqm_path, and dqm::implementation::NavigatorBase::setCurrentFolder().

Referenced by dqmEndJob(), and dqmEndLuminosityBlock().

◆ getHistoPSet()

MEPSet FastTimerServiceClient::getHistoPSet ( const edm::ParameterSet & pset )

staticprivate

Definition at line 461 of file FastTimerServiceClient.cc.

                                                                        {
   return MEPSet{
       pset.getParameter<std::string>("folder"),
       pset.getParameter<std::string>("name"),
       pset.getParameter<int>("nbins"),
       pset.getParameter<double>("xmin"),
       pset.getParameter<double>("xmax"),
   };
 }

References muonDTDigis_cfi::pset, and AlCaHLTBitMon_QueryRunRegistry::string.

Member Data Documentation

◆ doPlotsVsPixelLumi_

bool FastTimerServiceClient::doPlotsVsPixelLumi_

private

Definition at line 66 of file FastTimerServiceClient.cc.

Referenced by fillPathSummaryPlots(), and fillProcessSummaryPlots().

◆ doPlotsVsPU_

bool FastTimerServiceClient::doPlotsVsPU_

private

Definition at line 67 of file FastTimerServiceClient.cc.

Referenced by fillPathSummaryPlots(), and fillProcessSummaryPlots().

◆ doPlotsVsScalLumi_

bool FastTimerServiceClient::doPlotsVsScalLumi_

private

Definition at line 65 of file FastTimerServiceClient.cc.

Referenced by fillPathSummaryPlots(), and fillProcessSummaryPlots().

◆ m_dqm_path

std::string FastTimerServiceClient::m_dqm_path

private

Definition at line 43 of file FastTimerServiceClient.cc.

Referenced by fillSummaryPlots().

◆ pixelLumiMEPSet_

MEPSet FastTimerServiceClient::pixelLumiMEPSet_

private

Definition at line 70 of file FastTimerServiceClient.cc.

Referenced by fillPathSummaryPlots(), and fillProcessSummaryPlots().

◆ puMEPSet_

MEPSet FastTimerServiceClient::puMEPSet_

private

Definition at line 71 of file FastTimerServiceClient.cc.

Referenced by fillPathSummaryPlots(), and fillProcessSummaryPlots().

◆ scalLumiMEPSet_

MEPSet FastTimerServiceClient::scalLumiMEPSet_

private

Definition at line 69 of file FastTimerServiceClient.cc.

Referenced by fillPathSummaryPlots(), and fillProcessSummaryPlots().

Public Member Functions

Static Public Member Functions

Private Member Functions

Static Private Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ FastTimerServiceClient()

◆ ~FastTimerServiceClient()

Member Function Documentation

◆ dqmEndJob()

◆ dqmEndLuminosityBlock()

◆ fillDescriptions()

◆ fillLumiMePSetDescription()

◆ fillPathSummaryPlots()

◆ fillPlotsVsLumi()

◆ fillProcessSummaryPlots()

◆ fillPUMePSetDescription()

◆ fillSummaryPlots()

◆ getHistoPSet()

Member Data Documentation

◆ doPlotsVsPixelLumi_

◆ doPlotsVsPU_

◆ doPlotsVsScalLumi_

◆ m_dqm_path

◆ pixelLumiMEPSet_

◆ puMEPSet_

◆ scalLumiMEPSet_