#include <MeasurementDistancemeter.h>

Inheritance diagram for MeasurementDistancemeter:

Public Member Functions
void	calculateSimulatedValue (ALIbool firstTime) override

void	correctValueAndSigma () override

	MeasurementDistancemeter ()

	MeasurementDistancemeter (const ALIint measdim, ALIstring &type, ALIstring &name)

void	setConversionFactor (const std::vector< ALIstring > &wordlist) override

	~MeasurementDistancemeter () override

Public Member Functions inherited from Measurement
void	addAffectingEntriesFromOptO (const OpticalObject *optoP)

void	AddOptOListItem (OpticalObject *opto)

void	AddOptONameListItem (ALIstring optos)

const std::vector< Entry * > &	affectingEntryList () const

void	buildAffectingEntryList ()

void	buildOptOList ()

virtual void	buildOptONamesList (const std::vector< ALIstring > &wl)

void	calculateOriginalSimulatedValue ()

void	construct ()

void	constructFromOA (OpticalAlignMeasurementInfo &measInfo)

void	copyMeas (Measurement *meas, const std::string &subsstr1, const std::string &subsstr2)

std::vector< ALIdouble >	DerivativeRespectEntry (Entry *entry)

const ALIuint	dim () const

void	DumpBadOrderOptOs ()

void	fillData (ALIuint coor, const std::vector< ALIstring > &wl)

void	fillData (ALIuint coor, OpticalAlignParam *oaParam)

const CLHEP::Hep3Vector &	getLightRayDirection () const

const CLHEP::Hep3Vector &	getLightRayPosition () const

ALIstring	getMeasuringBehaviour (const std::vector< OpticalObject * >::const_iterator vocite)

const OpticalObject *	getPreviousOptO (const OpticalObject *Popto) const

	Measurement ()

	Measurement (const ALIint measdim, ALIstring &type, ALIstring &name)

const ALIstring &	name () const

const std::vector< OpticalObject * > &	OptOList () const

const std::vector< ALIstring > &	OptONameList () const

void	postConstruct ()

const ALIstring &	sensorName ()

void	SetDimension (ALIuint dim)

void	setLightRayDirection (const CLHEP::Hep3Vector &lightRayDirection)

void	setLightRayPosition (const CLHEP::Hep3Vector &lightRayPosition)

void	setName ()

void	setSigma (ALIint coor, ALIdouble val)

void	setType (ALIstring type)

void	setValue (ALIint coor, ALIdouble val)

void	setValueSimulated (ALIint coor, ALIdouble value)

void	setValueSimulated_orig (ALIint coor, ALIdouble value)

virtual void	setXlaserLine (ALIuint ii, int val)

const ALIdouble *	sigma () const

const ALIdouble	sigma (ALIuint ii) const

virtual const ALIdouble	sigmaDimensionFactor () const

const ALIstring &	type () const

const ALIdouble *	value () const

const ALIdouble	value (ALIuint ii) const

virtual const ALIdouble	valueDimensionFactor () const

bool	valueIsSimulated (ALIint coor)

const ALIdouble	valueSimulated (ALIuint ii) const

const ALIdouble	valueSimulated_orig (ALIuint ii) const

const ALIstring	valueType (ALIuint ii) const

virtual int	xlaserLine (ALIuint ii)

virtual	~Measurement ()

Private Attributes
ALIdouble	theFactor

ALIdouble	theFactorSigma

Additional Inherited Members
Static Public Member Functions inherited from Measurement
static ALIstring	getCurrentDate ()

static ALIstring	getCurrentTime ()

static ALIstring &	measurementsFileName ()

static void	setCurrentDate (const std::vector< ALIstring > &wl)
	set the date of the current measurement More...

static void	setMeasurementsFileName (const ALIstring &filename)

Static Public Attributes inherited from Measurement
static ALIdouble	cameraScaleFactor = 1.

static ALIbool	only1 = false

static ALIstring	only1Date = ""

static ALIstring	only1Time = ""

Protected Member Functions inherited from Measurement
void	printStartCalculateSimulatedValue (const Measurement *meas)

void	Substitute2p (ALIstring &ref, const ALIstring &firstref, int NtwoPoints)

Detailed Description

Definition at line 18 of file MeasurementDistancemeter.h.

Constructor & Destructor Documentation

◆ MeasurementDistancemeter() [1/2]

MeasurementDistancemeter::MeasurementDistancemeter	(	const ALIint	measdim,
		ALIstring &	type,
		ALIstring &	name
	)

inline

Definition at line 20 of file MeasurementDistancemeter.h.

21 : Measurement(measdim, type, name), theFactor(1.), theFactorSigma(0.){};

◆ MeasurementDistancemeter() [2/2]

MeasurementDistancemeter::MeasurementDistancemeter ( )

inline

Definition at line 22 of file MeasurementDistancemeter.h.

22 {};

◆ ~MeasurementDistancemeter()

MeasurementDistancemeter::~MeasurementDistancemeter ( )

inlineoverride

Definition at line 23 of file MeasurementDistancemeter.h.

23 {};

Member Function Documentation

◆ calculateSimulatedValue()

void MeasurementDistancemeter::calculateSimulatedValue ( ALIbool firstTime )

overridevirtual

Reimplemented from Measurement.

Definition at line 25 of file MeasurementDistancemeter.cc.

                                                                         {
   if (ALIUtils::debug >= 2)
     printStartCalculateSimulatedValue(this);  // important for Examples/FakeMeas
  
   //---------- Loop list of OptO that take part in measurement
   std::vector<OpticalObject*>::const_iterator vocite = OptOList().begin();
   if (ALIUtils::debug >= 5)
     std::cout << "OptOList size= " << OptOList().size() << std::endl;
  
   //----- Check that there are only two measurements that are 'distance_target' and 'distancemeter'
   ALIbool right_objects = false;
   if (OptOList().size() == 2) {
     if ((*vocite)->type() == "distance_target" &&
         ((*(vocite + 1))->type() == "distancemeter" || (*(vocite + 1))->type() == "distancemeter1dim")) {
       right_objects = true;
     }
   }
   if (!right_objects) {
     std::cerr << "!!! ERROR in MeasurementDistancemeter: " << name()
               << " There should only be two objects of type 'distance_target' and 'distancemeter' " << std::endl;
     std::cerr << " 1st: " << (*vocite)->name() << " 2nd: " << (*vocite + 1)->name() << std::endl;
     std::cerr << " 1st " << (*vocite)->type() << " 2nd " << (*vocite + 1)->type() << std::endl;
  
     DumpBadOrderOptOs();
     std::exception();
   }
  
 #ifdef COCOA_VIS
   ALIVisLightPath* vispath = 0;
   if (ALIUtils::getFirstTime()) {
     GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
     if (gomgr->GlobalOptions()["VisWriteIguana"] > 1) {
       vispath = IgCocoaFileMgr::getInstance().newLightPath(name());
     }
   }
 #endif
  
   ALIuint isec = 0;  //security variable to check OptOList().size()
   for (vocite = OptOList().begin(); vocite != OptOList().end(); ++vocite) {
     if (ALIUtils::debug >= 2)
       std::cout << std::endl << "@@@@ LR:OBJECT " << (*vocite)->name() << std::endl;
     isec++;
  
     //---------- Get the behaviour of the object w.r.t the measurement (if it reflects the light, let it traverse it, ...)
     ALIstring behav = getMeasuringBehaviour(vocite);
  
     //---------- participate in measurement
     LightRay lightray;  //it is not used in this measurement type
     (*vocite)->participateInMeasurement(lightray, *this, behav);
  
 #ifdef COCOA_VIS
     if (ALIUtils::getFirstTime()) {
       GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
       if (gomgr->GlobalOptions()["VisWriteVRML"] > 1) {
         ALIVRMLMgr::getInstance().addLightPoint(lightray.point());
         if (ALIUtils::debug >= 5)
           std::cout << "ALIVRMLMg  addLightPoint " << lightray.point() << (*vocite)->name() << std::endl;
       }
       if (gomgr->GlobalOptions()["VisWriteIguana"] > 1) {
         vispath->addLightPoint(lightray.point(), *vocite);
       }
     }
 #endif
  
     if (isec > OptOList().size()) {
       std::cerr << "ERROR DE PROGRAMACION EN GetSimulatedValue" << std::endl;
       std::exception();
     }
   }
  
   if (ALIUtils::debug >= 5)
     std::cout << "end calculateSimulatedValue" << std::endl;
 }

References begin, beam_dqm_sourceclient-live_cfg::cerr, gather_cfg::cout, ALIUtils::debug, Measurement::DumpBadOrderOptOs(), cppFunctionSkipper::exception, ALIUtils::getFirstTime(), GlobalOptionMgr::getInstance(), Measurement::getMeasuringBehaviour(), GlobalOptionMgr::GlobalOptions(), Measurement::name(), Measurement::OptOList(), LightRay::point(), Measurement::printStartCalculateSimulatedValue(), findQualityFiles::size, and Measurement::type().

◆ correctValueAndSigma()

void MeasurementDistancemeter::correctValueAndSigma ( )

overridevirtual

Reimplemented from Measurement.

Definition at line 138 of file MeasurementDistancemeter.cc.

                                                     {
   ALIdouble val = value()[0];
   ALIdouble sig = sigma()[0];
   if (ALIUtils::debug >= 4)
     std::cout << "MeasurementDistancemeter::correctValueAndSigma: old value" << val << " +- " << sig << std::endl;
  
   //- std::cout << "FACTOR " << theFactor << "correct " << val << " "  << thePedestal << std::endl;
   val *= theFactor;
   //-------- Do not correct the sigma!!!!
   //-  sig *= theFactor;
   if (ALIUtils::debug >= 4)
     std::cout << "MeasuremenDistancemeter::correctValueAndSigma: new value " << val << " +- " << sig << std::endl;
   setValue(0, val);
   setSigma(0, sig);
 }

References gather_cfg::cout, ALIUtils::debug, Measurement::setSigma(), Measurement::setValue(), Measurement::sigma(), theFactor, heppy_batch::val, and Measurement::value().

◆ setConversionFactor()

void MeasurementDistancemeter::setConversionFactor ( const std::vector< ALIstring > & wordlist )

overridevirtual

Reimplemented from Measurement.

Definition at line 104 of file MeasurementDistancemeter.cc.

                                                                                        {
   //--------- Check that the format is OK
   if (wordlist.size() == 1)
     return;
   if (wordlist.size() != 4 || !ALIUtils::IsNumber(wordlist[1]) || !ALIUtils::IsNumber(wordlist[3]) ||
       wordlist[2] != ALIstring("+-")) {
     std::cerr << "!! Distancemeter Measurement setConversionFactor: WRONG FORMAT " << std::endl
               << "It should be: DISTANCEMETER factor +- error " << std::endl
               << "It is: ";
     ALIUtils::dumpVS(wordlist, " ", std::cerr);
     std::exception();
   }
   theFactor = atof(wordlist[1].c_str());
   //------ correct by dimension of value of tiltmeter
   GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
   ALIint dimfac = ALIint(gomgr->GlobalOptions()[ALIstring("distancemeter_meas_value_dimension")]);
   if (dimfac == 0) {
     theFactor *= 1.;
   } else if (dimfac == 1) {
     theFactor *= 1.E-3;
   } else if (dimfac == 2) {
     theFactor *= 1.E-6;
   } else {
     std::cerr
         << " !!!EXITING: error in global option distancemeter_meas_value_dimension, it can only take values 0,1,2, not "
         << dimfac;
     std::exception();
   }
   theFactorSigma = atof(wordlist[3].c_str());
 }

References beam_dqm_sourceclient-live_cfg::cerr, ALIUtils::dumpVS(), cppFunctionSkipper::exception, GlobalOptionMgr::getInstance(), GlobalOptionMgr::GlobalOptions(), ALIUtils::IsNumber(), theFactor, and theFactorSigma.

Member Data Documentation

◆ theFactor

ALIdouble MeasurementDistancemeter::theFactor

private

Definition at line 35 of file MeasurementDistancemeter.h.

Referenced by correctValueAndSigma(), and setConversionFactor().

◆ theFactorSigma

ALIdouble MeasurementDistancemeter::theFactorSigma

private

Definition at line 36 of file MeasurementDistancemeter.h.

Referenced by setConversionFactor().

Public Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ MeasurementDistancemeter() [1/2]

◆ MeasurementDistancemeter() [2/2]

◆ ~MeasurementDistancemeter()

Member Function Documentation

◆ calculateSimulatedValue()

◆ correctValueAndSigma()

◆ setConversionFactor()

Member Data Documentation

◆ theFactor

◆ theFactorSigma