define MonitorEnsembple to be used More...

#include <TopDiLeptonOfflineDQM.h>

Inheritance diagram for TopDiLeptonOfflineDQM:

Public Member Functions
void	analyze (const edm::Event &event, const edm::EventSetup &setup) override
	do this during the event loop More...

	TopDiLeptonOfflineDQM (const edm::ParameterSet &cfg)
	default constructor More...

	~TopDiLeptonOfflineDQM () override
	default destructor More...

Public Member Functions inherited from DQMOneEDAnalyzer<>
void	accumulate (edm::Event const &event, edm::EventSetup const &setup) override

void	beginRun (edm::Run const &run, edm::EventSetup const &setup) final

	DQMOneEDAnalyzer ()

void	endRun (edm::Run const &, edm::EventSetup const &) final

void	endRunProduce (edm::Run &run, edm::EventSetup const &setup) final

virtual bool	getCanSaveByLumi ()

Public Member Functions inherited from edm::one::EDProducer< edm::EndRunProducer, edm::one::WatchRuns, edm::Accumulator, Args... >
	EDProducer ()=default

SerialTaskQueue *	globalLuminosityBlocksQueue () final

SerialTaskQueue *	globalRunsQueue () final

bool	hasAbilityToProduceInBeginLumis () const final

bool	hasAbilityToProduceInBeginRuns () const final

bool	hasAbilityToProduceInEndLumis () const final

bool	hasAbilityToProduceInEndRuns () const final

bool	wantsGlobalLuminosityBlocks () const final

bool	wantsGlobalRuns () const final

Public Member Functions inherited from edm::one::EDProducerBase
	EDProducerBase ()

ModuleDescription const &	moduleDescription () const

bool	wantsStreamLuminosityBlocks () const

bool	wantsStreamRuns () const

	~EDProducerBase () override

Public Member Functions inherited from edm::ProducerBase
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)

std::vector< edm::ProductResolverIndex > const &	indiciesForPutProducts (BranchType iBranchType) const

	ProducerBase ()

std::vector< edm::ProductResolverIndex > const &	putTokenIndexToProductResolverIndex () const

std::vector< bool > const &	recordProvenanceList () const

void	registerProducts (ProducerBase , ProductRegistry , ModuleDescription const &)

std::function< void(BranchDescription const &)>	registrationCallback () const
	used by the fwk to register list of products More...

void	resolvePutIndicies (BranchType iBranchType, ModuleToResolverIndicies const &iIndicies, std::string const &moduleLabel)

TypeLabelList const &	typeLabelList () const
	used by the fwk to register the list of products of this module More...

	~ProducerBase () noexcept(false) override

Public Member Functions inherited from edm::EDConsumerBase
std::vector< ConsumesInfo >	consumesInfo () const

void	convertCurrentProcessAlias (std::string const &processName)
	Convert "@currentProcess" in InputTag process names to the actual current process name. More...

	EDConsumerBase ()

	EDConsumerBase (EDConsumerBase &&)=default

	EDConsumerBase (EDConsumerBase const &)=delete

ESProxyIndex const *	esGetTokenIndices (edm::Transition iTrans) const

ProductResolverIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const

void	itemsMayGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const

void	itemsToGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const

std::vector< ProductResolverIndexAndSkipBit > const &	itemsToGetFrom (BranchType iType) const

void	labelsForToken (EDGetToken iToken, Labels &oLabels) const

void	modulesWhoseProductsAreConsumed (std::vector< ModuleDescription const * > &modules, ProductRegistry const &preg, std::map< std::string, ModuleDescription const * > const &labelsToDesc, std::string const &processName) const

EDConsumerBase &	operator= (EDConsumerBase &&)=default

EDConsumerBase const &	operator= (EDConsumerBase const &)=delete

bool	registeredToConsume (ProductResolverIndex, bool, BranchType) const

bool	registeredToConsumeMany (TypeID const &, BranchType) const

ProductResolverIndexAndSkipBit	uncheckedIndexFrom (EDGetToken) const

void	updateLookup (BranchType iBranchType, ProductResolverIndexHelper const &, bool iPrefetchMayGet)

void	updateLookup (eventsetup::ESRecordsToProxyIndices const &)

virtual	~EDConsumerBase () noexcept(false)

Protected Member Functions
void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override

Protected Member Functions inherited from DQMOneEDAnalyzer<>
virtual void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &)=0

virtual void	dqmBeginRun (edm::Run const &, edm::EventSetup const &)

virtual void	dqmEndRun (edm::Run const &, edm::EventSetup const &)

Protected Member Functions inherited from edm::ProducerBase
template<class ProductType >
BranchAliasSetterT< ProductType >	produces ()
	declare what type of product will make and with which optional label More...

template<typename ProductType , BranchType B>
BranchAliasSetterT< ProductType >	produces ()

template<typename ProductType , Transition B>
BranchAliasSetterT< ProductType >	produces ()

BranchAliasSetter	produces (const TypeID &id, std::string instanceName=std::string(), bool recordProvenance=true)

template<BranchType B>
BranchAliasSetter	produces (const TypeID &id, std::string instanceName=std::string(), bool recordProvenance=true)

template<Transition B>
BranchAliasSetter	produces (const TypeID &id, std::string instanceName=std::string(), bool recordProvenance=true)

template<typename ProductType , Transition B>
BranchAliasSetterT< ProductType >	produces (std::string instanceName)

template<class ProductType >
BranchAliasSetterT< ProductType >	produces (std::string instanceName)

template<typename ProductType , BranchType B>
BranchAliasSetterT< ProductType >	produces (std::string instanceName)

ProducesCollector	producesCollector ()

Protected Member Functions inherited from edm::EDConsumerBase
EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)

template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)

ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...

template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()

void	consumesMany (const TypeToGet &id)

template<BranchType B>
void	consumesMany (const TypeToGet &id)

template<typename ESProduct , typename ESRecord , Transition Tr = Transition::Event>
auto	esConsumes ()

template<typename ESProduct , typename ESRecord , Transition Tr = Transition::Event>
auto	esConsumes (ESInputTag const &tag)

EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)

Private Member Functions
std::string	objectType (const std::string &label)

std::string	selectionStep (const std::string &label)

Private Attributes
edm::EDGetTokenT< reco::BeamSpot >	beamspot_
	beamspot More...

std::unique_ptr< StringCutObjectSelector< reco::BeamSpot > >	beamspotSelect_
	string cut selector More...

std::vector< std::unique_ptr< SelectionStep< reco::CaloJet > > >	CaloJetSteps

std::unique_ptr< SelectionStep< reco::PFCandidate > >	ElectronStep

std::vector< std::unique_ptr< SelectionStep< reco::Jet > > >	JetSteps

std::unique_ptr< SelectionStep< reco::MET > >	METStep

std::unique_ptr< SelectionStep< reco::PFCandidate > >	MuonStep

std::vector< std::unique_ptr< SelectionStep< reco::PFJet > > >	PFJetSteps

std::unique_ptr< SelectionStep< reco::Vertex > >	PvStep

std::vector< edm::ParameterSet >	sel_

std::map< std::string, std::pair< edm::ParameterSet, std::unique_ptr< TopDiLeptonOffline::MonitorEnsemble > > >	selection_

std::vector< std::string >	selectionOrder_

edm::ParameterSet	setup_

std::vector< std::string >	triggerPaths_
	trigger paths More...

edm::EDGetTokenT< edm::TriggerResults >	triggerTable_
	trigger table More...

edm::EDGetTokenT< std::vector< reco::Vertex > >	vertex_
	primary vertex More...

std::unique_ptr< StringCutObjectSelector< reco::Vertex > >	vertexSelect_
	string cut selector More...

Additional Inherited Members
Public Types inherited from DQMOneEDAnalyzer<>
typedef dqm::reco::DQMStore	DQMStore

typedef dqm::reco::MonitorElement	MonitorElement

Public Types inherited from edm::one::EDProducerBase
typedef EDProducerBase	ModuleType

Public Types inherited from edm::ProducerBase
using	ModuleToResolverIndicies = std::unordered_multimap< std::string, std::tuple< edm::TypeID const , const char , edm::ProductResolverIndex > >

typedef ProductRegistryHelper::TypeLabelList	TypeLabelList

Public Types inherited from edm::EDConsumerBase
typedef ProductLabels	Labels

Static Public Member Functions inherited from edm::one::EDProducerBase
static const std::string &	baseType ()

static void	fillDescriptions (ConfigurationDescriptions &descriptions)

static void	prevalidate (ConfigurationDescriptions &descriptions)

Protected Attributes inherited from DQMOneEDAnalyzer<>
edm::EDPutTokenT< DQMToken >	runToken_

Detailed Description

define MonitorEnsembple to be used

Module to apply a monitored selection of top like events in the di-leptonic channel.

"DQM/Physics/plugins/TopDiLeptonOfflineDQM.h"

Plugin to apply a monitored selection of top like events with some minimal flexibility in the number and definition of the selection steps. To achieve this flexibility it employes the SelectionStep class. The MonitorEnsemble class is used to provide a well defined set of histograms to be monitored after each selection step. The SelectionStep class provides a flexible and intuitive selection via the StringCutParser. SelectionStep and MonitorEnsemble classes are interleaved. The monitoring starts after a preselection step (which is not monitored in the context of this module) with an instance of the MonitorEnsemble class. The following objects are supported for selection:

jets : of type reco::Jet
elecs : of type reco::PFCandidate
muons : of type reco::PFCandidate
met : of type reco::MET

These types have to be present as prefix of the selection step paramter label separated from the rest of the label by a ':' (e.g. in the form "jets:step0"). The class expects selection labels of this type. They will be disentangled by the private helper functions objectType and seletionStep as declared below.

Definition at line 296 of file TopDiLeptonOfflineDQM.h.

Constructor & Destructor Documentation

◆ TopDiLeptonOfflineDQM()

TopDiLeptonOfflineDQM::TopDiLeptonOfflineDQM ( const edm::ParameterSet & cfg )

default constructor

Definition at line 692 of file TopDiLeptonOfflineDQM.cc.

     : vertexSelect_(nullptr),
       beamspotSelect_(nullptr),
       MuonStep(nullptr),
       ElectronStep(nullptr),
       PvStep(nullptr),
       METStep(nullptr) {
   JetSteps.clear();
   CaloJetSteps.clear();
   PFJetSteps.clear();
   // configure the preselection
   edm::ParameterSet presel = cfg.getParameter<edm::ParameterSet>("preselection");
   if (presel.existsAs<edm::ParameterSet>("trigger")) {
     edm::ParameterSet trigger = presel.getParameter<edm::ParameterSet>("trigger");
     //    triggerTable_=trigger.getParameter<edm::InputTag>("src");
     triggerTable_ = consumes<edm::TriggerResults>(trigger.getParameter<edm::InputTag>("src"));
     triggerPaths_ = trigger.getParameter<std::vector<std::string>>("select");
   }
   if (presel.existsAs<edm::ParameterSet>("vertex")) {
     edm::ParameterSet vertex = presel.getParameter<edm::ParameterSet>("vertex");
     vertex_ = consumes<std::vector<reco::Vertex>>(vertex.getParameter<edm::InputTag>("src"));
     vertexSelect_.reset(new StringCutObjectSelector<reco::Vertex>(vertex.getParameter<std::string>("select")));
   }
   if (presel.existsAs<edm::ParameterSet>("beamspot")) {
     edm::ParameterSet beamspot = presel.getParameter<edm::ParameterSet>("beamspot");
     beamspot_ = consumes<reco::BeamSpot>(beamspot.getParameter<edm::InputTag>("src"));
     beamspotSelect_.reset(new StringCutObjectSelector<reco::BeamSpot>(beamspot.getParameter<std::string>("select")));
   }
  
   // conifgure the selection
   sel_ = cfg.getParameter<std::vector<edm::ParameterSet>>("selection");
   setup_ = cfg.getParameter<edm::ParameterSet>("setup");
   for (unsigned int i = 0; i < sel_.size(); ++i) {
     selectionOrder_.push_back(sel_.at(i).getParameter<std::string>("label"));
     selection_[selectionStep(selectionOrder_.back())] =
         std::make_pair(sel_.at(i),
                        std::unique_ptr<TopDiLeptonOffline::MonitorEnsemble>(new TopDiLeptonOffline::MonitorEnsemble(
                            selectionStep(selectionOrder_.back()).c_str(), setup_, consumesCollector())));
   }
   for (std::vector<std::string>::const_iterator selIt = selectionOrder_.begin(); selIt != selectionOrder_.end();
        ++selIt) {
     std::string key = selectionStep(*selIt), type = objectType(*selIt);
     if (selection_.find(key) != selection_.end()) {
       if (type == "muons") {
         MuonStep.reset(new SelectionStep<reco::PFCandidate>(selection_[key].first, consumesCollector()));
       }
       if (type == "elecs") {
         ElectronStep.reset(new SelectionStep<reco::PFCandidate>(selection_[key].first, consumesCollector()));
       }
       if (type == "pvs") {
         PvStep.reset(new SelectionStep<reco::Vertex>(selection_[key].first, consumesCollector()));
       }
       if (type == "jets") {
         JetSteps.push_back(std::unique_ptr<SelectionStep<reco::Jet>>(
             new SelectionStep<reco::Jet>(selection_[key].first, consumesCollector())));
       }
       if (type == "jets/pf") {
         PFJetSteps.push_back(std::unique_ptr<SelectionStep<reco::PFJet>>(
             new SelectionStep<reco::PFJet>(selection_[key].first, consumesCollector())));
       }
       if (type == "jets/calo") {
         CaloJetSteps.push_back(std::unique_ptr<SelectionStep<reco::CaloJet>>(
             new SelectionStep<reco::CaloJet>(selection_[key].first, consumesCollector())));
       }
       if (type == "met") {
         METStep.reset(new SelectionStep<reco::MET>(selection_[key].first, consumesCollector()));
       }
     }
   }
 }

References beamspot_, beamspotSelect_, CaloJetSteps, looper::cfg, edm::EDConsumerBase::consumesCollector(), ElectronStep, edm::ParameterSet::existsAs(), dqmdumpme::first, edm::ParameterSet::getParameter(), mps_fire::i, JetSteps, crabWrapper::key, METStep, MuonStep, objectType(), PFJetSteps, PvStep, sel_, selection_, selectionOrder_, selectionStep(), setup_, AlCaHLTBitMon_QueryRunRegistry::string, triggerPaths_, triggerTable_, bphysicsOniaDQM_cfi::vertex, vertex_, and vertexSelect_.

◆ ~TopDiLeptonOfflineDQM()

TopDiLeptonOfflineDQM::~TopDiLeptonOfflineDQM ( )

inlineoverride

default destructor

Definition at line 301 of file TopDiLeptonOfflineDQM.h.

301 {}

Member Function Documentation

◆ analyze()

void TopDiLeptonOfflineDQM::analyze	(	const edm::Event &	event,
		const edm::EventSetup &	setup
	)

overridevirtual

do this during the event loop

Reimplemented from DQMOneEDAnalyzer<>.

Definition at line 768 of file TopDiLeptonOfflineDQM.cc.

                                                                                      {
   if (!triggerTable_.isUninitialized()) {
     edm::Handle<edm::TriggerResults> triggerTable;
     if (!event.getByToken(triggerTable_, triggerTable))
       return;
     if (!accept(event, *triggerTable, triggerPaths_))
       return;
   }
   if (!vertex_.isUninitialized()) {
     edm::Handle<std::vector<reco::Vertex>> vertex;
     if (!event.getByToken(vertex_, vertex))
       return;
     if (vertex->empty() || !(*vertexSelect_)(vertex->front()))
       return;
   }
   if (!beamspot_.isUninitialized()) {
     edm::Handle<reco::BeamSpot> beamspot;
     if (!event.getByToken(beamspot_, beamspot))
       return;
     if (!(*beamspotSelect_)(*beamspot))
       return;
   }
   unsigned int passed = 0;
  
   unsigned int nJetSteps = -1;
  
   unsigned int nPFJetSteps = -1;
  
   unsigned int nCaloJetSteps = -1;
   // apply selection steps
   for (std::vector<std::string>::const_iterator selIt = selectionOrder_.begin(); selIt != selectionOrder_.end();
        ++selIt) {
     std::string key = selectionStep(*selIt), type = objectType(*selIt);
     if (selection_.find(key) != selection_.end()) {
       if (type == "empty") {
         selection_[key].second->fill(event, setup);
       }
       if (type == "muons" && MuonStep != nullptr) {
         if (MuonStep->select(event)) {
           ++passed;
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
       if (type == "elecs" && ElectronStep != nullptr) {
         if (ElectronStep->select(event, "electron")) {
           ++passed;
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
       if (type == "jets" && !JetSteps.empty()) {
         nJetSteps++;
         if (JetSteps[nJetSteps] != nullptr) {
           if (JetSteps[nJetSteps]->select(event, setup)) {
             ++passed;
             selection_[key].second->fill(event, setup);
           } else
             break;
         }
       }
  
       if (type == "jets/pf" && !PFJetSteps.empty()) {
         nPFJetSteps++;
         if (PFJetSteps[nPFJetSteps] != nullptr) {
           if (PFJetSteps[nPFJetSteps]->select(event, setup)) {
             ++passed;
             selection_[key].second->fill(event, setup);
           } else
             break;
         }
       }
  
       if (type == "jets/calo" && !CaloJetSteps.empty()) {
         nCaloJetSteps++;
         if (CaloJetSteps[nCaloJetSteps] != nullptr) {
           if (CaloJetSteps[nCaloJetSteps]->select(event, setup)) {
             ++passed;
             selection_[key].second->fill(event, setup);
           } else
             break;
         }
       }
  
       if (type == "met" && METStep != nullptr) {
         ++passed;
         if (METStep->select(event)) {
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
     }
   }
 }

References accept(), HLTObjectsMonitor_cfi::beamspot, beamspot_, beamspotSelect_, CaloJetSteps, ElectronStep, edm::EDGetTokenT< T >::isUninitialized(), JetSteps, crabWrapper::key, METStep, MuonStep, objectType(), TriggerAnalyzer::passed, PFJetSteps, singleTopDQM_cfi::select, selection_, selectionOrder_, selectionStep(), singleTopDQM_cfi::setup, AlCaHLTBitMon_QueryRunRegistry::string, triggerPaths_, triggerTable_, bphysicsOniaDQM_cfi::vertex, and vertex_.

◆ bookHistograms()

void TopDiLeptonOfflineDQM::bookHistograms	(	DQMStore::IBooker &	ibooker,
		edm::Run const &	,
		edm::EventSetup const &
	)

overrideprotected

Definition at line 763 of file TopDiLeptonOfflineDQM.cc.

                                                                                                         {
   for (auto selIt = selection_.begin(); selIt != selection_.end(); ++selIt) {
     selIt->second.second->book(ibooker);
   }
 }

References selection_.

◆ objectType()

std::string TopDiLeptonOfflineDQM::objectType ( const std::string & label )

inlineprivate

deduce object type from ParameterSet label, the label is expected to be of type 'objectType:selectionStep'

Definition at line 313 of file TopDiLeptonOfflineDQM.h.

313 { return label.substr(0, label.find(':')); };

References label.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

◆ selectionStep()

std::string TopDiLeptonOfflineDQM::selectionStep ( const std::string & label )

inlineprivate

deduce selection step from ParameterSet label, the label is expected to be of type 'objectType:selectionStep'

Definition at line 316 of file TopDiLeptonOfflineDQM.h.

316 { return label.substr(label.find(':') + 1); };

Referenced by analyze(), and TopDiLeptonOfflineDQM().

Member Data Documentation

◆ beamspot_

edm::EDGetTokenT<reco::BeamSpot> TopDiLeptonOfflineDQM::beamspot_

private

beamspot

Definition at line 328 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

◆ beamspotSelect_

std::unique_ptr<StringCutObjectSelector<reco::BeamSpot> > TopDiLeptonOfflineDQM::beamspotSelect_

private

string cut selector

Definition at line 330 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

◆ CaloJetSteps

std::vector<std::unique_ptr<SelectionStep<reco::CaloJet> > > TopDiLeptonOfflineDQM::CaloJetSteps

private

Definition at line 346 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

◆ ElectronStep

std::unique_ptr<SelectionStep<reco::PFCandidate> > TopDiLeptonOfflineDQM::ElectronStep

private

Definition at line 342 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

◆ JetSteps

std::vector<std::unique_ptr<SelectionStep<reco::Jet> > > TopDiLeptonOfflineDQM::JetSteps

private

Definition at line 345 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

◆ METStep

std::unique_ptr<SelectionStep<reco::MET> > TopDiLeptonOfflineDQM::METStep

private

Definition at line 344 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

◆ MuonStep

std::unique_ptr<SelectionStep<reco::PFCandidate> > TopDiLeptonOfflineDQM::MuonStep

private

Definition at line 341 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

◆ PFJetSteps

std::vector<std::unique_ptr<SelectionStep<reco::PFJet> > > TopDiLeptonOfflineDQM::PFJetSteps

private

Definition at line 347 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

◆ PvStep

std::unique_ptr<SelectionStep<reco::Vertex> > TopDiLeptonOfflineDQM::PvStep

private

Definition at line 343 of file TopDiLeptonOfflineDQM.h.

Referenced by TopDiLeptonOfflineDQM().

◆ sel_

std::vector<edm::ParameterSet> TopDiLeptonOfflineDQM::sel_

private

Definition at line 349 of file TopDiLeptonOfflineDQM.h.

Referenced by TopDiLeptonOfflineDQM().

◆ selection_

std::map<std::string, std::pair<edm::ParameterSet, std::unique_ptr<TopDiLeptonOffline::MonitorEnsemble> > > TopDiLeptonOfflineDQM::selection_

private

this is the heart component of the plugin; std::string keeps a label the selection step for later identification, edm::ParameterSet keeps the configuration of the selection for the SelectionStep class, MonitoringEnsemble keeps an instance of the MonitorEnsemble class to be filled after each selection step

Definition at line 340 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), bookHistograms(), and TopDiLeptonOfflineDQM().

◆ selectionOrder_

std::vector<std::string> TopDiLeptonOfflineDQM::selectionOrder_

private

needed to guarantee the selection order as defined by the order of ParameterSets in the selection vector as defined in the config

Definition at line 334 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

◆ setup_

edm::ParameterSet TopDiLeptonOfflineDQM::setup_

private

Definition at line 350 of file TopDiLeptonOfflineDQM.h.

Referenced by upgradeWorkflowComponents.UpgradeWorkflow::setup(), and TopDiLeptonOfflineDQM().

◆ triggerPaths_

std::vector<std::string> TopDiLeptonOfflineDQM::triggerPaths_

private

trigger paths

Definition at line 322 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

◆ triggerTable_

edm::EDGetTokenT<edm::TriggerResults> TopDiLeptonOfflineDQM::triggerTable_

private

trigger table

Definition at line 316 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

◆ vertex_

edm::EDGetTokenT<std::vector<reco::Vertex> > TopDiLeptonOfflineDQM::vertex_

private

primary vertex

Definition at line 324 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

◆ vertexSelect_

std::unique_ptr<StringCutObjectSelector<reco::Vertex> > TopDiLeptonOfflineDQM::vertexSelect_

private

string cut selector

Definition at line 326 of file TopDiLeptonOfflineDQM.h.

Referenced by TopDiLeptonOfflineDQM().

Public Member Functions

Protected Member Functions

Private Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ TopDiLeptonOfflineDQM()

◆ ~TopDiLeptonOfflineDQM()

Member Function Documentation

◆ analyze()

◆ bookHistograms()

◆ objectType()

◆ selectionStep()

Member Data Documentation

◆ beamspot_

◆ beamspotSelect_

◆ CaloJetSteps

◆ ElectronStep

◆ JetSteps

◆ METStep

◆ MuonStep

◆ PFJetSteps

◆ PvStep

◆ sel_

◆ selection_

◆ selectionOrder_

◆ setup_

◆ triggerPaths_

◆ triggerTable_

◆ vertex_

◆ vertexSelect_