#include <CSCRadialStripTopology.h>

Inheritance diagram for CSCRadialStripTopology:

Public Member Functions
float	angularWidth () const override

float	centreToIntersection () const override

int	channel (const LocalPoint &) const override

	CSCRadialStripTopology (int ns, float aw, float dh, float r, float yAx=1.f, float yMid=0.)

float	detHeight () const override

LocalError	localError (const MeasurementPoint &, const MeasurementError &) const override

LocalError	localError (float strip, float stripErr2) const override

float	localPitch (const LocalPoint &) const override

LocalPoint	localPosition (const MeasurementPoint &) const override

LocalPoint	localPosition (float strip) const override

float	localStripLength (const LocalPoint &) const override

MeasurementError	measurementError (const LocalPoint &, const LocalError &) const override

MeasurementPoint	measurementPosition (const LocalPoint &) const override

int	nearestStrip (const LocalPoint &) const override

int	nstrips () const override

float	originToIntersection () const override

float	phiOfOneEdge () const override

float	phiPitch (void) const override

float	strip (const LocalPoint &) const override

float	stripAngle (float strip) const override

float	stripLength () const override

float	xOfStrip (int strip, float y) const override

float	yAxisOrientation () const override

float	yCentreOfStripPlane () const override

float	yDistanceToIntersection (float y) const override

float	yExtentOfStripPlane () const override

	~CSCRadialStripTopology () override

Public Member Functions inherited from RadialStripTopology
virtual LocalError	localError (float strip, float stripErr2) const=0

virtual LocalError	localError (float strip, float stripErr2, const Topology::LocalTrackPred &) const
	conversion taking also the angle from the predicted track state More...

virtual LocalPoint	localPosition (float strip) const=0

virtual LocalPoint	localPosition (float strip, const Topology::LocalTrackPred &) const
	conversion taking also the predicted track state More...

float	pitch () const final

	~RadialStripTopology () override

Public Member Functions inherited from StripTopology
virtual float	coveredStrips (const LocalPoint &lp1, const LocalPoint &lp2) const

virtual LocalError	localError (const MeasurementPoint &, const MeasurementError &) const=0

virtual LocalError	localError (const MeasurementPoint &mp, const MeasurementError &me, const LocalTrackPred &) const
	conversion taking also the angle from the predicted track state More...

virtual LocalError	localError (float strip, float stripErr2, const Topology::LocalTrackPred &) const
	conversion taking also the angle from the predicted track state More...

virtual float	localPitch (const LocalPoint &lp, const Topology::LocalTrackAngles &) const
	conversion taking also the angle from the track state (LocalTrajectoryParameters) More...

virtual LocalPoint	localPosition (const MeasurementPoint &) const=0

virtual LocalPoint	localPosition (const MeasurementPoint &mp, const LocalTrackPred &) const
	conversion taking also the angle from the predicted track state More...

virtual LocalPoint	localPosition (float strip, const Topology::LocalTrackPred &) const
	conversion taking also the predicted track state More...

virtual float	localStripLength (const LocalPoint &lp, const Topology::LocalTrackAngles &) const
	conversion taking also the angle from the track state (LocalTrajectoryParameters) More...

virtual float	strip (const LocalPoint &lp, const Topology::LocalTrackAngles &) const
	conversion taking also the angle from the track state (LocalTrajectoryParameters) More...

	~StripTopology () override

Public Member Functions inherited from Topology
virtual int	channel (const LocalPoint &lp, const LocalTrackAngles &) const
	conversion taking also the angle from the track state More...

virtual LocalError	localError (const MeasurementPoint &mp, const MeasurementError &me, const LocalTrackPred &) const
	conversion taking also the angle from the predicted track state More...

virtual LocalPoint	localPosition (const MeasurementPoint &mp, const LocalTrackPred &) const
	conversion taking also the angle from the predicted track state More...

virtual MeasurementError	measurementError (const LocalPoint &lp, const LocalError &le, const LocalTrackAngles &) const
	conversion taking also the angle from the track state More...

virtual MeasurementPoint	measurementPosition (const LocalPoint &lp, const LocalTrackAngles &) const
	conversion taking also the angle from the track state More...

virtual	~Topology ()

Private Attributes
float	theAngularWidth

float	theCentreToIntersection

float	theDetHeight

int	theNumberOfStrips

float	thePhiOfOneEdge

float	theYAxisOrientation

float	yCentre

Friends
std::ostream &	operator<< (std::ostream &, const RadialStripTopology &)

Additional Inherited Members
Public Types inherited from Topology
typedef Point2DBase< double, LocalTag >	Local2DPoint

typedef Vector2D::MathVector	MathVector2D

typedef Basic2DVector< double >	Vector2D

Detailed Description

Definition at line 28 of file CSCRadialStripTopology.h.

Constructor & Destructor Documentation

◆ CSCRadialStripTopology()

CSCRadialStripTopology::CSCRadialStripTopology	(	int	ns,
		float	aw,
		float	dh,
		float	r,
		float	yAx = `1.f`,
		float	yMid = `0.`
	)

Constructor from:

Parameters

ns	number of strips
aw	angular width of a strip
dh	detector height (usually 2 x apothem of TrapezoidalPlaneBounds)
r	radial distance from symmetry centre of detector to the point at which the outer edges of the two extreme strips (projected) intersect.
yAx	orientation of local y axis: 1 means pointing from the smaller side of the module to the larger side (along apothem), and -1 means in the opposite direction, i.e. from the larger side along the apothem to the smaller side. Default value is 1.
yMid	local y offset if mid-point of detector (strip plane) does not coincide with local origin. This decouples the extent of strip plane from the boundary of the detector in which the RST is embedded.

Definition at line 7 of file CSCRadialStripTopology.cc.

     : theNumberOfStrips(ns),
       theAngularWidth(aw),
       theDetHeight(dh),
       theCentreToIntersection(r),
       theYAxisOrientation(yAx),
       yCentre(yMid) {
   // Angular offset of extreme edge of detector, so that angle is
   // zero for a strip lying along local y axis = long symmetry axis of plane of strips
   thePhiOfOneEdge = -(0.5 * theNumberOfStrips) * theAngularWidth * yAx;
  
   LogTrace("CSCRadialStripTopology") << "CSCRadialStripTopology: constructed with"
                                      << " strips = " << ns << " width = " << aw << " rad "
                                      << " det_height = " << dh << " ctoi = " << r << " phi_edge = " << thePhiOfOneEdge
                                      << " rad "
                                      << " y_ax_ori = " << theYAxisOrientation << " y_det_centre = " << yCentre << "\n";
 }

References cuy::dh, LogTrace, alignCSCRings::r, theAngularWidth, theNumberOfStrips, thePhiOfOneEdge, theYAxisOrientation, and yCentre.

◆ ~CSCRadialStripTopology()

CSCRadialStripTopology::~CSCRadialStripTopology ( )

inlineoverride

Destructor

Definition at line 49 of file CSCRadialStripTopology.h.

49 {}

Member Function Documentation

◆ angularWidth()

float CSCRadialStripTopology::angularWidth ( ) const

inlineoverridevirtual

Angular width of a each strip

Implements RadialStripTopology.

Definition at line 159 of file CSCRadialStripTopology.h.

159 { return theAngularWidth; }

References theAngularWidth.

Referenced by FWRecoGeometryESProducer::addCSCGeometry(), localError(), localPitch(), OffsetRadialStripTopology::localPosition(), measurementError(), measurementPosition(), OffsetRadialStripTopology::OffsetRadialStripTopology(), phiPitch(), OffsetRadialStripTopology::strip(), strip(), OffsetRadialStripTopology::stripAngle(), stripAngle(), CSCGeometryValidate::validateCSCLayerGeometry(), and ValidateGeometry::validateCSCLayerGeometry().

◆ centreToIntersection()

float CSCRadialStripTopology::centreToIntersection ( ) const

inlineoverridevirtual

Distance from the intersection of the projections of the extreme edges of the two extreme strips to the symmetry centre of the plane of strips.

Implements RadialStripTopology.

Definition at line 181 of file CSCRadialStripTopology.h.

181 { return theCentreToIntersection; }

References theCentreToIntersection.

Referenced by FWRecoGeometryESProducer::addCSCGeometry(), localError(), CSCGeometryValidate::validateCSCLayerGeometry(), and ValidateGeometry::validateCSCLayerGeometry().

◆ channel()

int CSCRadialStripTopology::channel ( const LocalPoint & lp ) const

overridevirtual

Channel number corresponding to a given LocalPoint.
This is effectively an integer version of strip(), with range 0 to nstrips-1.
LocalPoints outside the detector strip plane will be considered as contributing to the edge channels 0 or nstrips-1.

Implements RadialStripTopology.

Reimplemented in OffsetRadialStripTopology, CSCUngangedStripTopology, and CSCGangedStripTopology.

Definition at line 25 of file CSCRadialStripTopology.cc.

                                                               {
   return std::min(int(strip(lp)), theNumberOfStrips - 1);
 }

References min(), strip(), and theNumberOfStrips.

Referenced by CSCUngangedStripTopology::channel().

◆ detHeight()

float CSCRadialStripTopology::detHeight ( ) const

inlineoverridevirtual

Length of long symmetry axis of plane of strips

Implements RadialStripTopology.

Definition at line 169 of file CSCRadialStripTopology.h.

169 { return theDetHeight; }

References theDetHeight.

Referenced by localError(), OffsetRadialStripTopology::localPosition(), localPosition(), localStripLength(), measurementError(), and measurementPosition().

◆ localError() [1/2]

LocalError CSCRadialStripTopology::localError	(	const MeasurementPoint &	mp,
		const MeasurementError &	me
	)		const

overridevirtual

LocalError for a given MeasurementPoint with known MeasurementError. This may be used in Kalman filtering and hence must allow possible correlations between the components.

Implements RadialStripTopology.

Definition at line 87 of file CSCRadialStripTopology.cc.

                                                                                                           {
   const double phi(stripAngle(mp.x())), s1(std::sin(phi)), c1(std::cos(phi)), cs(s1 * c1), s2(s1 * s1),
       c2(1 - s2),  // rotation matrix
  
       T(angularWidth() * (centreToIntersection() + yAxisOrientation() * mp.y() * detHeight()) /
         c1),                // tangential measurement unit (local pitch)
       R(detHeight() / c1),  // radial measurement unit (strip length)
       tt(me.uu() * T * T),  // tangential sigma^2
       rr(me.vv() * R * R),  // radial sigma^2
       tr(me.uv() * T * R),
  
       xx(c2 * tt + 2 * cs * tr + s2 * rr), yy(s2 * tt - 2 * cs * tr + c2 * rr), xy(cs * (rr - tt) + tr * (c2 - s2));
  
   return LocalError(xx, xy, yy);
 }

References angularWidth(), alignmentValidation::c1, centreToIntersection(), funct::cos(), fwrapper::cs, detHeight(), hlt_dqm_clientPB-live_cfg::me, phi, dttmaxenums::R, findQualityFiles::rr, indexGen::s2, funct::sin(), stripAngle(), groupFilesInBlocks::tt, PV2DBase< T, PVType, FrameType >::x(), geometryCSVtoXML::xx, geometryCSVtoXML::xy, PV2DBase< T, PVType, FrameType >::y(), yAxisOrientation(), and geometryCSVtoXML::yy.

◆ localError() [2/2]

LocalError CSCRadialStripTopology::localError	(	float	strip,
		float	stripErr2
	)		const

overridevirtual

LocalError for a pure strip measurement, where 'strip' is the (float) position (a 'phi' angle wrt y axis) and stripErr2 is the sigma-squared. Both quantities are expressed in units of theAngularWidth of a strip.

Implements RadialStripTopology.

Definition at line 74 of file CSCRadialStripTopology.cc.

                                                                                 {
   const double phi(stripAngle(strip)), t1(std::tan(phi)), t2(t1 * t1),
       // s1(std::sin(phi)), c1(std::cos(phi)),
       // cs(s1*c1), s2(s1*s1), c2(1-s2), // rotation matrix
  
       tt(stripErr2 * std::pow(centreToIntersection() * angularWidth(), 2.f)),  // tangential sigma^2   *c2
       rr(std::pow(detHeight(), 2.f) * (1.f / 12.f)),  // radial sigma^2( uniform prob density along strip)  *c2
  
       xx(tt + t2 * rr), yy(t2 * tt + rr), xy(t1 * (rr - tt));
  
   return LocalError(xx, xy, yy);
 }

References angularWidth(), centreToIntersection(), detHeight(), f, phi, funct::pow(), findQualityFiles::rr, strip(), stripAngle(), RandomServiceHelper::t1, RandomServiceHelper::t2, funct::tan(), groupFilesInBlocks::tt, geometryCSVtoXML::xx, geometryCSVtoXML::xy, and geometryCSVtoXML::yy.

◆ localPitch()

float CSCRadialStripTopology::localPitch ( const LocalPoint & lp ) const

overridevirtual

Pitch (strip width) at a given LocalPoint.
BEWARE: are you sure you really want to call this for a RadialStripTopology?

Implements RadialStripTopology.

Definition at line 118 of file CSCRadialStripTopology.cc.

                                                                    {
   // The local pitch is the local x width of the strip at the local (x,y)
   const int istrip = std::min(nstrips(), static_cast<int>(strip(lp)) + 1);  // which strip number
   const float fangle = stripAngle(static_cast<float>(istrip) - 0.5);        // angle of strip centre
   return yDistanceToIntersection(lp.y()) * std::sin(angularWidth()) /
          std::pow(std::cos(fangle - 0.5f * angularWidth()), 2.f);
 }

References angularWidth(), funct::cos(), f, min(), nstrips(), funct::pow(), funct::sin(), strip(), stripAngle(), PV3DBase< T, PVType, FrameType >::y(), and yDistanceToIntersection().

Referenced by CSCLayerGeometry::stripPitch().

◆ localPosition() [1/2]

LocalPoint CSCRadialStripTopology::localPosition ( const MeasurementPoint & mp ) const

overridevirtual

LocalPoint for a given MeasurementPoint
What's a MeasurementPoint?
In analogy with that used with TrapezoidalStripTopology objects, a MeasurementPoint is a 2-dim object.
The first dimension measures the angular position wrt central line of symmetry of detector, in units of strip (angular) widths (range 0 to total angle subtended by a detector).
The second dimension measures the fractional position along the strip (range -0.5 to +0.5).
BEWARE! The components are not Cartesian.

Implements RadialStripTopology.

Reimplemented in OffsetRadialStripTopology.

Definition at line 60 of file CSCRadialStripTopology.cc.

                                                                                  {
   const float  // y = (L/cos(phi))*mp.y()*cos(phi)
       y(mp.y() * detHeight() + yCentreOfStripPlane()),
       x(yAxisOrientation() * yDistanceToIntersection(y) * std::tan(stripAngle(mp.x())));
   return LocalPoint(x, y);
 }

References detHeight(), stripAngle(), funct::tan(), x, PV2DBase< T, PVType, FrameType >::x(), y, PV2DBase< T, PVType, FrameType >::y(), yAxisOrientation(), yCentreOfStripPlane(), and yDistanceToIntersection().

◆ localPosition() [2/2]

LocalPoint CSCRadialStripTopology::localPosition ( float strip ) const

overridevirtual

LocalPoint on x axis for given 'strip' 'strip' is a float in units of the strip (angular) width

Implements RadialStripTopology.

Reimplemented in OffsetRadialStripTopology.

Definition at line 56 of file CSCRadialStripTopology.cc.

                                                                   {
   return LocalPoint(yAxisOrientation() * originToIntersection() * tan(stripAngle(strip)), 0);
 }

References originToIntersection(), strip(), stripAngle(), funct::tan(), and yAxisOrientation().

Referenced by OffsetRadialStripTopology::localPosition().

◆ localStripLength()

float CSCRadialStripTopology::localStripLength ( const LocalPoint & lp ) const

overridevirtual

Length of a strip passing through a given LocalPpoint

Implements RadialStripTopology.

Definition at line 41 of file CSCRadialStripTopology.cc.

                                                                          {
   return detHeight() * std::sqrt(1.f + std::pow(lp.x() / yDistanceToIntersection(lp.y()), 2.f));
 }

References detHeight(), f, funct::pow(), mathSSE::sqrt(), PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), and yDistanceToIntersection().

◆ measurementError()

MeasurementError CSCRadialStripTopology::measurementError	(	const LocalPoint &	p,
		const LocalError &	e
	)		const

overridevirtual

Implements RadialStripTopology.

Definition at line 103 of file CSCRadialStripTopology.cc.

                                                                                                         {
   const double yHitToInter(yDistanceToIntersection(p.y())),
       t(yAxisOrientation() * p.x() / yHitToInter),  // tan(strip angle)
       cs(t / (1 + t * t)), s2(t * cs), c2(1 - s2),  // rotation matrix
  
       T2(1. / (std::pow(angularWidth(), 2.f) *
                (std::pow(p.x(), 2.f) + std::pow(yHitToInter, 2)))),  // 1./tangential measurement unit (local pitch) ^2
       R2(c2 / std::pow(detHeight(), 2.f)),                           // 1./ radial measurement unit (strip length) ^2
  
       uu((c2 * e.xx() - 2 * cs * e.xy() + s2 * e.yy()) * T2), vv((s2 * e.xx() + 2 * cs * e.xy() + c2 * e.yy()) * R2),
       uv((cs * (e.xx() - e.yy()) + e.xy() * (c2 - s2)) * std::sqrt(T2 * R2));
  
   return MeasurementError(uu, uv, vv);
 }

References angularWidth(), fwrapper::cs, detHeight(), MillePedeFileConverter_cfg::e, f, AlCaHLTBitMon_ParallelJobs::p, funct::pow(), indexGen::s2, mathSSE::sqrt(), OrderedSet::t, yAxisOrientation(), and yDistanceToIntersection().

◆ measurementPosition()

MeasurementPoint CSCRadialStripTopology::measurementPosition ( const LocalPoint & lp ) const

overridevirtual

Implements RadialStripTopology.

Reimplemented in OffsetRadialStripTopology.

Definition at line 67 of file CSCRadialStripTopology.cc.

                                                                                        {
   const float  // phi is [pi/2 - conventional local phi], use atan2(x,y) rather than atan2(y,x)
       phi(yAxisOrientation() * std::atan2(lp.x(), yDistanceToIntersection(lp.y())));
   return MeasurementPoint(yAxisOrientation() * (phi - phiOfOneEdge()) / angularWidth(),
                           (lp.y() - yCentreOfStripPlane()) / detHeight());
 }

References angularWidth(), detHeight(), phi, phiOfOneEdge(), PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), yAxisOrientation(), yCentreOfStripPlane(), and yDistanceToIntersection().

Referenced by OffsetRadialStripTopology::measurementPosition().

◆ nearestStrip()

int CSCRadialStripTopology::nearestStrip ( const LocalPoint & lp ) const

overridevirtual

Nearest strip to given LocalPoint

Implements RadialStripTopology.

Definition at line 29 of file CSCRadialStripTopology.cc.

                                                                    {
   return std::min(nstrips(), static_cast<int>(std::max(float(0), strip(lp))) + 1);
 }

References SiStripPI::max, min(), nstrips(), and strip().

Referenced by CSCLayerGeometry::nearestStrip().

◆ nstrips()

int CSCRadialStripTopology::nstrips ( ) const

inlineoverridevirtual

Total number of strips

Implements RadialStripTopology.

Definition at line 122 of file CSCRadialStripTopology.h.

122 { return theNumberOfStrips; }

References theNumberOfStrips.

Referenced by localPitch(), nearestStrip(), CSCLayerGeometry::numberOfStrips(), OffsetRadialStripTopology::strip(), and strip().

◆ originToIntersection()

float CSCRadialStripTopology::originToIntersection ( ) const

inlineoverridevirtual

(y) distance from intersection of the projections of the strips to the local coordinate origin. Same as centreToIntersection() if symmetry centre of strip plane coincides with local origin.

Implements RadialStripTopology.

Definition at line 188 of file CSCRadialStripTopology.h.

188 { return (theCentreToIntersection - yCentre); }

References theCentreToIntersection, and yCentre.

Referenced by CSCStripTopology::equationOfStrip(), localPosition(), OffsetRadialStripTopology::localPosition(), OffsetRadialStripTopology::strip(), OffsetRadialStripTopology::toLocal(), OffsetRadialStripTopology::toPrime(), and yDistanceToIntersection().

◆ phiOfOneEdge()

float CSCRadialStripTopology::phiOfOneEdge ( ) const

inlineoverridevirtual

Convenience function to access azimuthal angle of extreme edge of first strip measured relative to long symmetry axis of the plane of strips.

WARNING! This angle is measured clockwise from the local y axis which means it is in the conventional azimuthal phi plane, but azimuth is of course measured from local x axis not y. The range of this angle is -(full angle)/2 to +(full angle)/2.
where (full angle) = nstrips() * angularWidth().

Implements RadialStripTopology.

Definition at line 202 of file CSCRadialStripTopology.h.

202 { return thePhiOfOneEdge; }

References thePhiOfOneEdge.

Referenced by FWRecoGeometryESProducer::addCSCGeometry(), OffsetRadialStripTopology::localPosition(), measurementPosition(), OffsetRadialStripTopology::strip(), strip(), OffsetRadialStripTopology::stripAngle(), stripAngle(), CSCGeometryValidate::validateCSCLayerGeometry(), and ValidateGeometry::validateCSCLayerGeometry().

◆ phiPitch()

float CSCRadialStripTopology::phiPitch ( void ) const

inlineoverridevirtual

Phi pitch of each strip (= angular width!)

Implements RadialStripTopology.

Definition at line 164 of file CSCRadialStripTopology.h.

164 { return angularWidth(); }

References angularWidth().

Referenced by CSCLayerGeometry::stripPhiPitch().

◆ strip()

float CSCRadialStripTopology::strip ( const LocalPoint & lp ) const

overridevirtual

Strip in which a given LocalPoint lies. This is a float which represents the fractional strip position within the detector.
Returns zero if the LocalPoint falls at the extreme low edge of the detector or BELOW, and float(nstrips) if it falls at the extreme high edge or ABOVE.

Implements RadialStripTopology.

Reimplemented in OffsetRadialStripTopology.

Definition at line 49 of file CSCRadialStripTopology.cc.

                                                               {
   const float  // phi is measured from y axis --> sign of angle is sign of x * yAxisOrientation --> use atan2(x,y), not atan2(y,x)
       phi(std::atan2(lp.x(), yDistanceToIntersection(lp.y()))),
       aStrip((phi - yAxisOrientation() * phiOfOneEdge()) / angularWidth());
   return std::max(float(0), std::min((float)nstrips(), aStrip));
 }

References angularWidth(), SiStripPI::max, min(), nstrips(), phi, phiOfOneEdge(), PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), yAxisOrientation(), and yDistanceToIntersection().

Referenced by CSCGangedStripTopology::channel(), channel(), localError(), localPitch(), localPosition(), nearestStrip(), stripAngle(), and xOfStrip().

◆ stripAngle()

float CSCRadialStripTopology::stripAngle ( float strip ) const

overridevirtual

Angle between strip and symmetry axis (=local y axis) for given strip.
This is like a phi angle but measured clockwise from y axis rather than counter clockwise from x axis. Note that 'strip' is a float with a continuous range from 0 to float(nstrips) to cover the whole detector, and the centres of strips correspond to half-integer values 0.5, 1.5, ..., nstrips-0.5 whereas values 1, 2, ... nstrips correspond to the upper phi edges of the strips.

Implements RadialStripTopology.

Reimplemented in OffsetRadialStripTopology.

Definition at line 33 of file CSCRadialStripTopology.cc.

                                                           {
   return phiOfOneEdge() + yAxisOrientation() * strip * angularWidth();
 }

References angularWidth(), phiOfOneEdge(), strip(), and yAxisOrientation().

Referenced by localError(), localPitch(), localPosition(), and xOfStrip().

◆ stripLength()

float CSCRadialStripTopology::stripLength ( ) const

inlineoverridevirtual

Height of detector (= length of long symmetry axis of the plane of strips).

Implements RadialStripTopology.

Definition at line 127 of file CSCRadialStripTopology.h.

127 { return theDetHeight; }

References theDetHeight.

◆ xOfStrip()

float CSCRadialStripTopology::xOfStrip	(	int	strip,
		float	y
	)		const

overridevirtual

Local x where centre of strip intersects input local y
'strip' should be in range 1 to nstrips()

Implements RadialStripTopology.

Definition at line 45 of file CSCRadialStripTopology.cc.

                                                                {
   return yAxisOrientation() * yDistanceToIntersection(y) * std::tan(stripAngle(static_cast<float>(strip) - 0.5));
 }

References strip(), stripAngle(), funct::tan(), y, yAxisOrientation(), and yDistanceToIntersection().

Referenced by CSCLayerGeometry::xOfStrip().

◆ yAxisOrientation()

float CSCRadialStripTopology::yAxisOrientation ( ) const

inlineoverridevirtual

y axis orientation, 1 means detector width increases with local y

Implements RadialStripTopology.

Definition at line 218 of file CSCRadialStripTopology.h.

218 { return theYAxisOrientation; }

References theYAxisOrientation.

Referenced by FWRecoGeometryESProducer::addCSCGeometry(), localError(), localPosition(), measurementError(), measurementPosition(), strip(), stripAngle(), CSCGeometryValidate::validateCSCLayerGeometry(), ValidateGeometry::validateCSCLayerGeometry(), xOfStrip(), and yDistanceToIntersection().

◆ yCentreOfStripPlane()

float CSCRadialStripTopology::yCentreOfStripPlane ( ) const

inlineoverridevirtual

Offset in local y between midpoint of detector (strip plane) extent and local origin

Implements RadialStripTopology.

Definition at line 223 of file CSCRadialStripTopology.h.

223 { return yCentre; }

References yCentre.

Referenced by FWRecoGeometryESProducer::addCSCGeometry(), OffsetRadialStripTopology::localPosition(), localPosition(), measurementPosition(), CSCGeometryValidate::validateCSCLayerGeometry(), ValidateGeometry::validateCSCLayerGeometry(), and CSCStripTopology::yLimitsOfStripPlane().

◆ yDistanceToIntersection()

float CSCRadialStripTopology::yDistanceToIntersection ( float y ) const

overridevirtual

Distance in local y from a hit to the point of intersection of projected strips

Implements RadialStripTopology.

Definition at line 37 of file CSCRadialStripTopology.cc.

                                                                    {
   return yAxisOrientation() * y + originToIntersection();
 }

References originToIntersection(), y, and yAxisOrientation().

Referenced by localPitch(), localPosition(), localStripLength(), measurementError(), measurementPosition(), strip(), and xOfStrip().

◆ yExtentOfStripPlane()

float CSCRadialStripTopology::yExtentOfStripPlane ( ) const

inlineoverridevirtual

y extent of strip plane

Implements RadialStripTopology.

Definition at line 174 of file CSCRadialStripTopology.h.

174 { return theDetHeight; } // same as detHeight()

References theDetHeight.

Referenced by CSCStripTopology::yLimitsOfStripPlane().

Friends And Related Function Documentation

◆ operator<<

std::ostream& operator<<	(	std::ostream &	os,
		const RadialStripTopology &	rst
	)

friend

Definition at line 9 of file RadialStripTopology.cc.

                                                                        {
   os << "RadialStripTopology " << std::endl
      << " " << std::endl
      << "number of strips          " << rst.nstrips() << std::endl
      << "centre to whereStripsMeet " << rst.centreToIntersection() << std::endl
      << "detector height in y      " << rst.detHeight() << std::endl
      << "angular width of strips   " << rst.phiPitch() << std::endl
      << "phi of one edge           " << rst.phiOfOneEdge() << std::endl
      << "y axis orientation        " << rst.yAxisOrientation() << std::endl
      << "y of centre of strip plane " << rst.yCentreOfStripPlane() << std::endl;
   return os;
 }

Member Data Documentation

◆ theAngularWidth

float CSCRadialStripTopology::theAngularWidth

private

Definition at line 234 of file CSCRadialStripTopology.h.

Referenced by angularWidth(), and CSCRadialStripTopology().

◆ theCentreToIntersection

float CSCRadialStripTopology::theCentreToIntersection

private

Definition at line 236 of file CSCRadialStripTopology.h.

Referenced by centreToIntersection(), and originToIntersection().

◆ theDetHeight

float CSCRadialStripTopology::theDetHeight

private

Definition at line 235 of file CSCRadialStripTopology.h.

Referenced by detHeight(), stripLength(), and yExtentOfStripPlane().

◆ theNumberOfStrips

int CSCRadialStripTopology::theNumberOfStrips

private

Definition at line 233 of file CSCRadialStripTopology.h.

Referenced by channel(), CSCRadialStripTopology(), and nstrips().

◆ thePhiOfOneEdge

float CSCRadialStripTopology::thePhiOfOneEdge

private

Definition at line 237 of file CSCRadialStripTopology.h.

Referenced by CSCRadialStripTopology(), and phiOfOneEdge().

◆ theYAxisOrientation

float CSCRadialStripTopology::theYAxisOrientation

private

Definition at line 238 of file CSCRadialStripTopology.h.

Referenced by CSCRadialStripTopology(), and yAxisOrientation().

◆ yCentre

float CSCRadialStripTopology::yCentre

private

Definition at line 239 of file CSCRadialStripTopology.h.

Referenced by CSCRadialStripTopology(), originToIntersection(), and yCentreOfStripPlane().

Public Member Functions

Private Attributes

Friends

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ CSCRadialStripTopology()

◆ ~CSCRadialStripTopology()

Member Function Documentation

◆ angularWidth()

◆ centreToIntersection()

◆ channel()

◆ detHeight()

◆ localError() [1/2]

◆ localError() [2/2]

◆ localPitch()

◆ localPosition() [1/2]

◆ localPosition() [2/2]

◆ localStripLength()

◆ measurementError()

◆ measurementPosition()

◆ nearestStrip()

◆ nstrips()

◆ originToIntersection()

◆ phiOfOneEdge()

◆ phiPitch()

◆ strip()

◆ stripAngle()

◆ stripLength()

◆ xOfStrip()

◆ yAxisOrientation()

◆ yCentreOfStripPlane()

◆ yDistanceToIntersection()

◆ yExtentOfStripPlane()

Friends And Related Function Documentation

◆ operator<<

Member Data Documentation

◆ theAngularWidth

◆ theCentreToIntersection

◆ theDetHeight

◆ theNumberOfStrips

◆ thePhiOfOneEdge

◆ theYAxisOrientation

◆ yCentre