AlignableSiStripDet.cc

Go to the documentation of this file.

/* 
 *  $Date: 2011/09/05 16:59:07 $
 *  $Revision: 1.9 $
 */
 
#include "Alignment/TrackerAlignment/interface/AlignableSiStripDet.h"
 
#include "Alignment/CommonAlignment/interface/AlignableSurface.h"
 
#include "CondFormats/Alignment/interface/AlignmentErrorsExtended.h"
#include "CondFormats/Alignment/interface/AlignTransformErrorExtended.h"
 
#include "DataFormats/GeometrySurface/interface/Bounds.h"
#include "DataFormats/TrackingRecHit/interface/AlignmentPositionError.h"
#include "DataFormats/GeometryCommonDetAlgo/interface/GlobalError.h"
#include "DataFormats/GeometrySurface/interface/BoundPlane.h"
#include "Geometry/TrackerGeometryBuilder/interface/PlaneBuilderForGluedDet.h"
#include "Geometry/CommonDetUnit/interface/GluedGeomDet.h"
#include "Geometry/TrackerGeometryBuilder/interface/StripGeomDetUnit.h"
 
#include "FWCore/Utilities/interface/Exception.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"
 
#include <cmath>
 
AlignableSiStripDet::AlignableSiStripDet(const GluedGeomDet* gluedDet)
    : AlignableDet(gluedDet, true),  // true: adding DetUnits
      theMonoBounds(gluedDet->monoDet()->surface().bounds().clone()),
      theStereoBounds(gluedDet->stereoDet()->surface().bounds().clone()),
      theMonoType(static_cast<const StripGeomDetUnit*>(gluedDet->monoDet())->specificType()),
      theStereoType(static_cast<const StripGeomDetUnit*>(gluedDet->stereoDet())->specificType()) {
  // It is not allowed to store a pointer to GeomDet within objects with a life time
  // longer than an Event:
  // GeomDet comes from TrackerGeometry that is created from GeometricDet that depends on
  // IdealGeometryRecord from EventSetup, so it could change in next event!
  //  ==> Need to store directly what I need from it.
  // Unfortunately the current way with references for the type does not solve that,
  // either. But currently no way out, see header file.
 
  // check order mono/stereo
  const Alignables units(this->components());
  if (units.size() != 2 || gluedDet->monoDet()->geographicalId() != units[0]->geomDetId() ||
      gluedDet->stereoDet()->geographicalId() != units[1]->geomDetId()) {
    throw cms::Exception("LogicError") << "[AlignableSiStripDet] "
                                       << "Either != 2 components or "
                                       << "mono/stereo in wrong order for consistifyAlignments.";
  }
}
 
//__________________________________________________________________________________________________
AlignableSiStripDet::~AlignableSiStripDet() {
  delete theMonoBounds;
  delete theStereoBounds;
}
 
//__________________________________________________________________________________________________
Alignments* AlignableSiStripDet::alignments() const {
  const_cast<AlignableSiStripDet*>(this)->consistifyAlignments();
 
  return this->AlignableDet::alignments();
}
 
//__________________________________________________________________________________________________
void AlignableSiStripDet::consistifyAlignments() {
  // make alignments consistent with daughters, calling method from geometry
 
  // The aim of all this gymnastics is to have the alignments calculated by
  // PlaneBuilderForGluedDet::plane(const std::vector<const GeomDetUnit*> &detComps);
  //
  // So we take the (new) position and orientation from the AligableDetUnits,
  // but bounds and GeomDetType from original GeomDetUnits to create new GeomDetUnits
  // that are passed to that routine.
 
  const Alignables aliUnits(this->components());  // order mono==0, stereo==1 checked in ctr.
 
  BoundPlane::BoundPlanePointer monoPlane =
      BoundPlane::build(aliUnits[0]->globalPosition(), aliUnits[0]->globalRotation(), theMonoBounds->clone());
  // Fortunately we do not seem to need a GeometricDet pointer and can use 0:
  const StripGeomDetUnit monoDet(&(*monoPlane), &theMonoType, 0);
 
  BoundPlane::BoundPlanePointer stereoPlane =
      BoundPlane::build(aliUnits[1]->globalPosition(), aliUnits[1]->globalRotation(), theStereoBounds->clone());
  // Fortunately we do not seem to need a GeometricDet pointer and can use 0:
  const StripGeomDetUnit stereoDet(&(*stereoPlane), &theStereoType, 0);
 
  std::vector<const GeomDetUnit*> detComps;
  detComps.push_back(&monoDet);    // order mono first, stereo second should be as in...
  detComps.push_back(&stereoDet);  // ...TrackerGeomBuilderFromGeometricDet::buildGeomDet
 
  // Now we have all to calculate new position and rotation via PlaneBuilderForGluedDet.
  const PositionType oldPos(theSurface.position());  // From old surface for keeping...
  const RotationType oldRot(theSurface.rotation());  // ...track of changes.
 
  PlaneBuilderForGluedDet planeBuilder;
  theSurface = AlignableSurface(*planeBuilder.plane(detComps));
 
  // But do not forget to keep track of movements/rotations:
  const GlobalVector movement(theSurface.position().basicVector() - oldPos.basicVector());
  // Seems to be correct down to delta angles 4.*1e-8:
  const RotationType rotation(oldRot.multiplyInverse(theSurface.rotation()));
  this->addDisplacement(movement);
  this->addRotation(rotation);
 
  //   this->dumpCompareEuler(oldRot, theSurface.rotation());
 
  //   if (movement.mag2()) { // > 1.e-10) {
  //     edm::LogWarning("Alignment") << "@SUB=consistifyAlignments"
  //                                  << "Delta: " << movement.x() << " " << movement.y() << " " << movement.z()
  //                                  << "\nPos: " << oldPos.perp() << " " << oldPos.phi() << " " << oldPos.z();
  //   }
}
 
// #include "CLHEP/Vector/EulerAngles.h"
// #include "CLHEP/Vector/Rotation.h"
// //__________________________________________________________________________________________________
// void AlignableSiStripDet::dumpCompareEuler(const RotationType &oldRot,
//                     const RotationType &newRot) const
// {
//   //
//   const HepRotation oldClhep(HepRep3x3(oldRot.xx(), oldRot.xy(), oldRot.xz(),
//                     oldRot.yx(), oldRot.yy(), oldRot.yz(),
//                     oldRot.zx(), oldRot.zy(), oldRot.zz()));
//
//   const HepRotation newClhep(HepRep3x3(newRot.xx(), newRot.xy(), newRot.xz(),
//                     newRot.yx(), newRot.yy(), newRot.yz(),
//                     newRot.zx(), newRot.zy(), newRot.zz()));
//
//   const RotationType rotationGlob(oldRot.multiplyInverse(newRot));
//   const RotationType rotation(theSurface.toLocal(rotationGlob)); // not 100% correct: new global...
//   const HepRotation diff(HepRep3x3(rotation.xx(), rotation.xy(), rotation.xz(),
//                     rotation.yx(), rotation.yy(), rotation.yz(),
//                     rotation.zx(), rotation.zy(), rotation.zz()));
//
//   edm::LogWarning("Alignment") << "@SUB=dumpCompareEuler"
//                     << "oldEuler " << oldClhep.eulerAngles()
//                     << "\nnewEuler " << newClhep.eulerAngles()
//                 << "\n diff_euler " << diff.eulerAngles()
//                 << "\n diff_diag (" << diff.xx() << ", " << diff.yy()
//                 <<         ", " << diff.zz() << ")";
// }