CSCGeometryBuilder Class Reference

#include <CSCGeometryBuilder.h>

Public Member Functions
void	build (CSCGeometry &theGeometry, const RecoIdealGeometry &rig, const CSCRecoDigiParameters &cscpars)
	Build the geometry. More...
	CSCGeometryBuilder ()
	Constructor. More...
virtual	~CSCGeometryBuilder ()
	Destructor. More...

Private Member Functions
void	buildChamber (CSCGeometry &theGeometry, CSCDetId chamberId, const std::vector< float > &fpar, const std::vector< float > &fupar, const std::vector< float > &gtran, const std::vector< float > &grmat, const CSCWireGroupPackage &wg)
	Build one CSC chamber, and its component layers, and add them to the geometry. More...

Private Attributes
const std::string	myName

Detailed Description

Build the CSCGeometry from the DDD description.

Author

Tim Cox

Definition at line 20 of file CSCGeometryBuilder.h.

Constructor & Destructor Documentation

CSCGeometryBuilder()

CSCGeometryBuilder::CSCGeometryBuilder

(

)

Constructor.

Definition at line 13 of file CSCGeometryBuilder.cc.

: myName("CSCGeometryBuilder") {}

~CSCGeometryBuilder()

CSCGeometryBuilder::~CSCGeometryBuilder ( )

virtual

Destructor.

Definition at line 15 of file CSCGeometryBuilder.cc.

{}

Member Function Documentation

build()

void CSCGeometryBuilder::build	(	CSCGeometry &	theGeometry,
		const RecoIdealGeometry &	rig,
		const CSCRecoDigiParameters &	cscpars
	)

Build the geometry.

Definition at line 17 of file CSCGeometryBuilder.cc.

                                                                     {
  std::vector<float> fpar;
  std::vector<float> gtran;
  std::vector<float> grmat;
  std::vector<float> fupar;
  std::vector<double>::const_iterator it, endIt;
  const std::vector<DetId>& detids(rig.detIds());
 
  for (size_t idt = 0; idt < detids.size(); ++idt) {
    CSCDetId detid = CSCDetId(detids[idt]);
    int jstation = detid.station();
    int jring = detid.ring();
 
    endIt = rig.shapeEnd(idt);
    fpar.clear();
    for (it = rig.shapeStart(idt); it != endIt; ++it) {
      fpar.emplace_back((float)(*it));
    }
 
    gtran.clear();
    endIt = rig.tranEnd(idt);
    for (it = rig.tranStart(idt); it != endIt; ++it) {
      gtran.emplace_back((float)(*it));
    }
    grmat.clear();
    endIt = rig.rotEnd(idt);
    for (it = rig.rotStart(idt); it != endIt; ++it) {
      grmat.emplace_back((float)(*it));
    }
 
    // get the chamber type from existing info
    int chamberType = CSCChamberSpecs::whatChamberType(jstation, jring);
    size_t cs = 0;
    assert(!cscpars.pChamberType.empty());
    while (cs < cscpars.pChamberType.size() && chamberType != cscpars.pChamberType[cs]) {
      ++cs;
    }
    assert(cs != cscpars.pChamberType.size());
 
    // check the existence of the specs for this type WHY? Remove it...
    size_t fu, numfuPars;
    CSCWireGroupPackage wg;
    fu = cscpars.pUserParOffset[cs];
    numfuPars = fu + 1 + size_t(cscpars.pfupars[fu]);
 
    // upars from db are now uparvals + wg info so we need to unwrap only part here first...
    LogTrace(myName) << myName << ": I think I have " << cscpars.pUserParSize[cs] << " values in pfupars (uparvals)."
                     << std::endl;
    LogTrace(myName) << myName << ": For fupar I will start at " << cscpars.pUserParOffset[cs] + 1
                     << " in pfupars and go to " << numfuPars << "." << std::endl;
    for (++fu; fu < numfuPars; ++fu) {
      LogTrace(myName) << myName << ": pfupars[" << fu << "]=" << cscpars.pfupars[fu] << std::endl;
      fupar.emplace_back(cscpars.pfupars[fu]);
    }
    // now, we need to start from "here" at fu to go on and build wg...
    wg.wireSpacing = cscpars.pfupars[fu++];
    wg.alignmentPinToFirstWire = cscpars.pfupars[fu++];
    wg.numberOfGroups = int(cscpars.pfupars[fu++]);
    wg.narrowWidthOfWirePlane = cscpars.pfupars[fu++];
    wg.wideWidthOfWirePlane = cscpars.pfupars[fu++];
    wg.lengthOfWirePlane = cscpars.pfupars[fu++];
    size_t numgrp = static_cast<size_t>(cscpars.pfupars[fu]);
    size_t maxFu = fu + 1 + numgrp;
    fu++;
    for (; fu < maxFu; ++fu) {
      wg.wiresInEachGroup.emplace_back(int(cscpars.pfupars[fu]));
    }
    maxFu = fu + numgrp;
    for (; fu < maxFu; ++fu) {
      wg.consecutiveGroups.emplace_back(int(cscpars.pfupars[fu]));
    }
 
    if (wg.numberOfGroups != 0) {
      LogTrace(myName) << myName << ": TotNumWireGroups     = " << wg.numberOfGroups;
      LogTrace(myName) << myName << ": WireSpacing          = " << wg.wireSpacing;
      LogTrace(myName) << myName << ": AlignmentPinToFirstWire = " << wg.alignmentPinToFirstWire;
      LogTrace(myName) << myName << ": Narrow width of wire plane = " << wg.narrowWidthOfWirePlane;
      LogTrace(myName) << myName << ": Wide width of wire plane = " << wg.wideWidthOfWirePlane;
      LogTrace(myName) << myName << ": Length in y of wire plane = " << wg.lengthOfWirePlane;
      LogTrace(myName) << myName << ": wg.consecutiveGroups.size() = " << wg.consecutiveGroups.size();
      LogTrace(myName) << myName << ": wg.wiresInEachGroup.size() = " << wg.wiresInEachGroup.size();
      LogTrace(myName) << myName << ": \tNumGroups\tWiresInGroup";
      for (size_t i = 0; i < wg.consecutiveGroups.size(); i++) {
        LogTrace(myName) << myName << " \t" << wg.consecutiveGroups[i] << "\t\t" << wg.wiresInEachGroup[i];
      }
    } else {
      LogTrace(myName) << myName << ": DDD is MISSING SpecPars for wire groups";
    }
    LogTrace(myName) << myName << ": end of wire group info. ";
 
    // Are we going to apply centre-to-intersection offsets, even if values exist in the specs file?
    if (!theGeometry.centreTIOffsets())
      fupar[30] = 0.;  // reset to zero if flagged 'off'
 
    buildChamber(theGeometry, detid, fpar, fupar, gtran, grmat, wg);  //, cscpars.pWGPs[cs] );
    fupar.clear();
  }
}

References CSCWireGroupPackage::alignmentPinToFirstWire, cms::cuda::assert(), buildChamber(), CSCGeometry::centreTIOffsets(), CSCWireGroupPackage::consecutiveGroups, fwrapper::cs, RecoIdealGeometry::detIds(), mps_fire::i, createfilelist::int, CSCWireGroupPackage::lengthOfWirePlane, LogTrace, myName, CSCWireGroupPackage::narrowWidthOfWirePlane, CSCWireGroupPackage::numberOfGroups, CSCRecoDigiParameters::pChamberType, CSCRecoDigiParameters::pfupars, CSCRecoDigiParameters::pUserParOffset, CSCRecoDigiParameters::pUserParSize, CSCDetId::ring(), RecoIdealGeometry::rotEnd(), RecoIdealGeometry::rotStart(), RecoIdealGeometry::shapeEnd(), RecoIdealGeometry::shapeStart(), CSCDetId::station(), RecoIdealGeometry::tranEnd(), RecoIdealGeometry::tranStart(), CSCChamberSpecs::whatChamberType(), CSCWireGroupPackage::wideWidthOfWirePlane, CSCWireGroupPackage::wiresInEachGroup, and CSCWireGroupPackage::wireSpacing.

Referenced by AlignmentMonitorAsAnalyzer::analyze(), CSCGeometryBuilderFromDDD::build(), AlignmentProducerBase::createGeometries(), MuonAlignmentInputMethod::idealCSCGeometry(), CSCGeometryESModule::initCSCGeometry_(), MisalignedMuonESProducer::produce(), and MuonAlignmentOutputXML::write().

buildChamber()

void CSCGeometryBuilder::buildChamber ( CSCGeometry &  theGeometry, CSCDetId  chamberId, const std::vector< float > &  fpar, const std::vector< float > &  fupar, const std::vector< float > &  gtran, const std::vector< float > &  grmat, const CSCWireGroupPackage &  wg  )

private

Build one CSC chamber, and its component layers, and add them to the geometry.

Definition at line 118 of file CSCGeometryBuilder.cc.

  {
  LogTrace(myName) << myName << ": entering buildChamber";
 
  int jend = chamberId.endcap();
  int jstat = chamberId.station();
  int jring = chamberId.ring();
  int jch = chamberId.chamber();
  int jlay = chamberId.layer();
 
  if (jlay != 0)
    edm::LogWarning(myName) << "Error! CSCGeometryBuilderFromDDD was fed layer id = " << jlay << "\n";
 
  const size_t kNpar = 4;
  if (fpar.size() != kNpar)
    edm::LogError(myName) << "Error, expected npar=" << kNpar << ", found npar=" << fpar.size() << std::endl;
 
  LogTrace(myName) << myName << ":  E" << jend << " S" << jstat << " R" << jring << " C" << jch << " L" << jlay;
  LogTrace(myName) << myName << ": npar=" << fpar.size() << " hB=" << fpar[0] << " hT=" << fpar[1] << " hD=" << fpar[2]
                   << " hH=" << fpar[3];
  LogTrace(myName) << myName << ": gtran[0,1,2]=" << gtran[0] << " " << gtran[1] << " " << gtran[2];
  LogTrace(myName) << myName << ": grmat[0-8]=" << grmat[0] << " " << grmat[1] << " " << grmat[2] << " " << grmat[3]
                   << " " << grmat[4] << " " << grmat[5] << " " << grmat[6] << " " << grmat[7] << " " << grmat[8];
  LogTrace(myName) << myName << ": nupar=" << fupar.size() << " upar[0]=" << fupar[0] << " upar[" << fupar.size() - 1
                   << "]=" << fupar[fupar.size() - 1];
 
  const CSCChamber* chamber = theGeometry.chamber(chamberId);
  if (chamber) {
  } else {  // this chamber not yet built/stored
 
    LogTrace(myName) << myName << ": CSCChamberSpecs::build requested for ME" << jstat << jring;
    int chamberType = CSCChamberSpecs::whatChamberType(jstat, jring);
    const CSCChamberSpecs* aSpecs = theGeometry.findSpecs(chamberType);
    if (!fupar.empty() && aSpecs == nullptr) {
      // make new one:
      aSpecs = theGeometry.buildSpecs(chamberType, fpar, fupar, wg);
    } else if (fupar.empty() && aSpecs == nullptr) {
      edm::LogError(myName)
          << "SHOULD BE THROW? Error, wg and/or fupar size are 0 BUT this Chamber Spec has not been built!";
    }
 
    // Build a Transformation out of GEANT gtran and grmat...
    // These are used to transform a point in the local reference frame
    // of a subdetector to the global frame of CMS by
    //         (grmat)^(-1)*local + (gtran)
    // The corresponding transformation from global to local is
    //         (grmat)*(global - gtran)
 
    Surface::RotationType aRot(
        grmat[0], grmat[1], grmat[2], grmat[3], grmat[4], grmat[5], grmat[6], grmat[7], grmat[8]);
 
    // This rotation from GEANT considers the detector face as the x-z plane.
    // We want this to be the local x-y plane.
    // Furthermore, the -z_global endcap has LH local coordinates, since it is built
    // in GEANT as a *reflection* of the +z_global endcap.
    // So we need to rotate, and in -z flip local x.
 
    // aRot.rotateAxes will transform aRot in place so that it becomes
    // applicable to the new local coordinates: detector face in x-y plane
    // looking out along z, in either endcap.
 
    // The interface for rotateAxes specifies 'new' X,Y,Z but the
    // implementation deals with them as the 'old'.
 
    Basic3DVector<float> oldX(1., 0., 0.);
    Basic3DVector<float> oldY(0., 0., -1.);
    Basic3DVector<float> oldZ(0., 1., 0.);
 
    if (gtran[2] < 0.)
      oldX *= -1;
 
    aRot.rotateAxes(oldX, oldY, oldZ);
 
    // Need to know z of layers w.r.t to z of centre of chamber.
 
    float frameThickness = fupar[31] / 10.;   // mm -> cm
    float gapThickness = fupar[32] / 10.;     // mm -> cm
    float panelThickness = fupar[33] / 10.;   // mm -> cm
    float zAverageAGVtoAF = fupar[34] / 10.;  // mm -> cm
 
    float layerThickness = gapThickness;                    // consider the layer to be the gas gap
    float layerSeparation = gapThickness + panelThickness;  // centre-to-centre of neighbouring layers
 
    float chamberThickness = 7. * panelThickness + 6. * gapThickness + 2. * frameThickness;  // chamber frame thickness
    float hChamberThickness = chamberThickness / 2.;  // @@ should match value returned from DDD directly
 
    // distAverageAGVtoAF is offset between centre of chamber (AF) and (L1+L6)/2 (average AGVs)
    // where AF = AluminumFrame and AGV=ActiveGasVolume (volume names in DDD).
    // It is signed based on global z values: zc - (zl1+zl6)/2
 
    // Local z values w.r.t. AF...
    //     z of wires in layer 1 = z_w1 = +/- zAverageAGVtoAF + 2.5*layerSeparation; // layer 1 is at most +ve local z
    // The sign in '+/-' depends on relative directions of local and global z.
    // It is '-' if they are the same direction, and '+' if opposite directions.
    //     z of wires in layer N   = z_wN = z_w1 - (N-1)*layerSeparation;
    //     z of strips in layer N  = z_sN = z_wN + gapThickness/2.; @@ BEWARE: need to check if it should be '-gapThickness/2' !
 
    // Set dimensions of trapezoidal chamber volume
    // N.B. apothem is 4th in fpar but 3rd in ctor
 
    // hChamberThickness and fpar[2] should be the same - but using the above value at least shows
    // how chamber structure works
 
    TrapezoidalPlaneBounds* bounds = new TrapezoidalPlaneBounds(fpar[0], fpar[1], fpar[3], hChamberThickness);
 
    // Centre of chamber in z is specified in DDD
    Surface::PositionType aVec(gtran[0], gtran[1], gtran[2]);
 
    Plane::PlanePointer plane = Plane::build(aVec, aRot, bounds);
 
    CSCChamber* chamber = new CSCChamber(plane, chamberId, aSpecs);
    theGeometry.addChamber(chamber);
 
    LogTrace(myName) << myName << ": Create chamber E" << jend << " S" << jstat << " R" << jring << " C" << jch
                     << " z=" << gtran[2] << " t/2=" << fpar[2] << " (DDD) or " << hChamberThickness
                     << " (specs) adr=" << chamber;
 
    // Create the component layers of this chamber
    // We're taking the z as the z of the wire plane within the layer (middle of gas gap)
 
    // Specify global z of layer by offsetting from centre of chamber: since layer 1
    // is nearest to IP in stations 1/2 but layer 6 is nearest in stations 3/4,
    // we need to adjust sign of offset appropriately...
    int localZwrtGlobalZ = +1;
    if ((jend == 1 && jstat < 3) || (jend == 2 && jstat > 2))
      localZwrtGlobalZ = -1;
    int globalZ = +1;
    if (jend == 2)
      globalZ = -1;
 
    LogTrace(myName) << myName << ": layerSeparation=" << layerSeparation << ", zAF-zAverageAGV=" << zAverageAGVtoAF
                     << ", localZwrtGlobalZ=" << localZwrtGlobalZ << ", gtran[2]=" << gtran[2];
 
    for (short j = 1; j <= 6; ++j) {
      CSCDetId layerId = CSCDetId(jend, jstat, jring, jch, j);
 
      // extra-careful check that we haven't already built this layer
      const CSCLayer* cLayer = dynamic_cast<const CSCLayer*>(theGeometry.idToDet(layerId));
 
      if (cLayer == nullptr) {
        // build the layer - need the chamber's specs and an appropriate layer-geometry
        const CSCChamberSpecs* aSpecs = chamber->specs();
        const CSCLayerGeometry* geom = (j % 2 != 0) ? aSpecs->oddLayerGeometry(jend) : aSpecs->evenLayerGeometry(jend);
 
        // Build appropriate BoundPlane, based on parent chamber, with gas gap as thickness
 
        // centre of chamber is at global z = gtran[2]
        float zlayer = gtran[2] - globalZ * zAverageAGVtoAF + localZwrtGlobalZ * (3.5 - j) * layerSeparation;
 
        Surface::RotationType chamberRotation = chamber->surface().rotation();
        Surface::PositionType layerPosition(gtran[0], gtran[1], zlayer);
        std::array<const float, 4> const& dims = geom->parameters();  // returns hb, ht, d, a
        // dims[2] = layerThickness/2.; // half-thickness required and note it is 3rd value in vector
        TrapezoidalPlaneBounds* bounds = new TrapezoidalPlaneBounds(dims[0], dims[1], dims[3], layerThickness / 2.);
        Plane::PlanePointer plane = Plane::build(layerPosition, chamberRotation, bounds);
 
        CSCLayer* layer = new CSCLayer(plane, layerId, chamber, geom);
 
        LogTrace(myName) << myName << ": Create layer E" << jend << " S" << jstat << " R" << jring << " C" << jch
                         << " L" << j << " z=" << zlayer << " t=" << layerThickness << " or "
                         << layer->surface().bounds().thickness() << " adr=" << layer << " layerGeom adr=" << geom;
 
        chamber->addComponent(j, layer);
        theGeometry.addLayer(layer);
      } else {
        edm::LogError(myName) << ": ERROR, layer " << j << " for chamber = " << (chamber->id())
                              << " already exists: layer address=" << cLayer << " chamber address=" << chamber << "\n";
      }
 
    }  // layer construction within chamber
  }    // chamber construction
}

References CSCGeometry::addChamber(), CSCGeometry::addLayer(), Surface::bounds(), Plane::build(), CSCGeometry::buildSpecs(), relativeConstraints::chamber, CSCDetId::chamber(), CSCGeometry::chamber(), CSCDetId::endcap(), CSCChamberSpecs::evenLayerGeometry(), CSCGeometry::findSpecs(), relativeConstraints::geom, CSCGeometry::idToDet(), dqmiolumiharvest::j, CSCDetId::layer(), LogTrace, myName, CSCChamberSpecs::oddLayerGeometry(), CSCDetId::ring(), TkRotation< T >::rotateAxes(), CSCDetId::station(), GeomDet::surface(), Bounds::thickness(), and CSCChamberSpecs::whatChamberType().

Referenced by build().

Member Data Documentation

myName

const std::string CSCGeometryBuilder::myName

private

Definition at line 42 of file CSCGeometryBuilder.h.

Referenced by build(), and buildChamber().