DTResolutionAnalysisTask.cc

Go to the documentation of this file.

/*
 *  See header file for a description of this class.
 *
 *  \author G. Cerminara - INFN Torino
 */

#include "DTResolutionAnalysisTask.h"

// Framework
#include "FWCore/Framework/interface/Event.h"
#include "FWCore/Framework/interface/EventSetup.h"
#include "FWCore/ServiceRegistry/interface/Service.h"
#include "FWCore/Framework/interface/LuminosityBlock.h"
#include "FWCore/ParameterSet/interface/ParameterSet.h"

#include "FWCore/MessageLogger/interface/MessageLogger.h"

#include "DQMServices/Core/interface/DQMStore.h"

//Geometry
#include "Geometry/DTGeometry/interface/DTGeometry.h"
#include "Geometry/Records/interface/MuonGeometryRecord.h"

//RecHit
#include "DataFormats/DTRecHit/interface/DTRecHitCollection.h"

#include <iterator>

using namespace edm;
using namespace std;

DTResolutionAnalysisTask::DTResolutionAnalysisTask(const ParameterSet& pset) {
  edm::LogVerbatim("DTDQM|DTMonitorModule|DTResolutionAnalysisTask")
      << "[DTResolutionAnalysisTask] Constructor called!" << endl;

  // the name of the 4D rec hits collection
  recHits4DToken_ = consumes<DTRecSegment4DCollection>(edm::InputTag(pset.getParameter<string>("recHits4DLabel")));

  prescaleFactor = pset.getUntrackedParameter<int>("diagnosticPrescale", 1);
  resetCycle = pset.getUntrackedParameter<int>("ResetCycle", -1);
  // top folder for the histograms in DQMStore
  topHistoFolder = pset.getUntrackedParameter<string>("topHistoFolder", "DT/02-Segments");

  thePhiHitsCut = pset.getUntrackedParameter<u_int32_t>("phiHitsCut", 8);
  theZHitsCut = pset.getUntrackedParameter<u_int32_t>("zHitsCut", 4);
}

DTResolutionAnalysisTask::~DTResolutionAnalysisTask() {
  edm::LogVerbatim("DTDQM|DTMonitorModule|DTResolutionAnalysisTask")
      << "[DTResolutionAnalysisTask] Destructor called!" << endl;
}

void DTResolutionAnalysisTask::dqmBeginRun(const Run& run, const EventSetup& setup) {
  // Get the DT Geometry
  setup.get<MuonGeometryRecord>().get(dtGeom);
}

void DTResolutionAnalysisTask::bookHistograms(DQMStore::IBooker& ibooker,
                                              edm::Run const& iRun,
                                              edm::EventSetup const& /* iSetup */) {
  // Book the histograms
  vector<const DTChamber*> chambers = dtGeom->chambers();
  for (vector<const DTChamber*>::const_iterator chamber = chambers.begin(); chamber != chambers.end();
       ++chamber) {  // Loop over all chambers
    DTChamberId dtChId = (*chamber)->id();
    for (int sl = 1; sl <= 3; ++sl) {  // Loop over SLs
      if (dtChId.station() == 4 && sl == 2)
        continue;
      const DTSuperLayerId dtSLId(dtChId, sl);
      bookHistos(ibooker, dtSLId);
    }
  }
}

void DTResolutionAnalysisTask::beginLuminosityBlock(const LuminosityBlock& lumiSeg, const EventSetup& context) {
  edm::LogVerbatim("DTDQM|DTMonitorModule|DTResolutionAnalysisTask")
      << "[DTResolutionTask]: Begin of LS transition" << endl;

  if (resetCycle != -1 && lumiSeg.id().luminosityBlock() % resetCycle == 0) {
    for (map<DTSuperLayerId, vector<MonitorElement*> >::const_iterator histo = histosPerSL.begin();
         histo != histosPerSL.end();
         histo++) {
      int size = (*histo).second.size();
      for (int i = 0; i < size; i++) {
        (*histo).second[i]->Reset();
      }
    }
  }
}

void DTResolutionAnalysisTask::analyze(const edm::Event& event, const edm::EventSetup& setup) {
  edm::LogVerbatim("DTDQM|DTMonitorModule|DTResolutionAnalysisTask")
      << "[DTResolutionAnalysisTask] Analyze #Run: " << event.id().run() << " #Event: " << event.id().event() << endl;

  // Get the 4D segment collection from the event
  edm::Handle<DTRecSegment4DCollection> all4DSegments;
  event.getByToken(recHits4DToken_, all4DSegments);

  // check the validity of the collection
  if (!all4DSegments.isValid())
    return;

  // Loop over all chambers containing a segment
  DTRecSegment4DCollection::id_iterator chamberId;
  for (chamberId = all4DSegments->id_begin(); chamberId != all4DSegments->id_end(); ++chamberId) {
    // Get the range for the corresponding ChamerId
    DTRecSegment4DCollection::range range = all4DSegments->get(*chamberId);

    // Get the chamber
    const DTChamber* chamber = dtGeom->chamber(*chamberId);

    // Loop over the rechits of this ChamerId
    for (DTRecSegment4DCollection::const_iterator segment4D = range.first; segment4D != range.second; ++segment4D) {
      // If Statio != 4 skip RecHits with dimension != 4
      // For the Station 4 consider 2D RecHits
      if ((*chamberId).station() != 4 && (*segment4D).dimension() != 4) {
        edm::LogVerbatim("DTDQM|DTMonitorModule|DTResolutionAnalysisTask")
            << "[DTResolutionAnalysisTask]***Warning: RecSegment dimension is not 4 but " << (*segment4D).dimension()
            << "!" << endl;
        continue;
      } else if ((*chamberId).station() == 4 && (*segment4D).dimension() != 2) {
        edm::LogVerbatim("DTDQM|DTMonitorModule|DTResolutionAnalysisTask")
            << "[DTResolutionAnalysisTask]***Warning: RecSegment dimension is not 2 but " << (*segment4D).dimension()
            << "!" << endl;
        continue;
      }

      // Get all 1D RecHits at step 3 within the 4D segment
      vector<DTRecHit1D> recHits1D_S3;

      // Get 1D RecHits at Step 3 and select only events with
      // 8 hits in phi and 4 hits in theta (if any)

      if ((*segment4D).hasPhi()) {  // has phi component
        const DTChamberRecSegment2D* phiSeg = (*segment4D).phiSegment();
        vector<DTRecHit1D> phiRecHits = phiSeg->specificRecHits();

        if (phiRecHits.size() < thePhiHitsCut) {
          continue;
        }
        copy(phiRecHits.begin(), phiRecHits.end(), back_inserter(recHits1D_S3));
      } else {
      }

      if ((*segment4D).hasZed()) {
        const DTSLRecSegment2D* zSeg = (*segment4D).zSegment();
        vector<DTRecHit1D> zRecHits = zSeg->specificRecHits();
        if (zRecHits.size() < theZHitsCut) {
          continue;
        }
        copy(zRecHits.begin(), zRecHits.end(), back_inserter(recHits1D_S3));
      }

      // Loop over 1D RecHit inside 4D segment
      for (vector<DTRecHit1D>::const_iterator recHit1D = recHits1D_S3.begin(); recHit1D != recHits1D_S3.end();
           recHit1D++) {
        const DTWireId wireId = (*recHit1D).wireId();

        // Get the layer and the wire position
        const DTLayer* layer = chamber->superLayer(wireId.superlayerId())->layer(wireId.layerId());
        float wireX = layer->specificTopology().wirePosition(wireId.wire());

        // Distance of the 1D rechit from the wire
        float distRecHitToWire = fabs(wireX - (*recHit1D).localPosition().x());

        // Extrapolate the segment to the z of the wire

        // Get wire position in chamber RF
        LocalPoint wirePosInLay(wireX, (*recHit1D).localPosition().y(), (*recHit1D).localPosition().z());
        GlobalPoint wirePosGlob = layer->toGlobal(wirePosInLay);
        LocalPoint wirePosInChamber = chamber->toLocal(wirePosGlob);

        // Segment position at Wire z in chamber local frame
        LocalPoint segPosAtZWire = (*segment4D).localPosition() + (*segment4D).localDirection() * wirePosInChamber.z() /
                                                                      cos((*segment4D).localDirection().theta());

        // Compute the distance of the segment from the wire
        int sl = wireId.superlayer();

        double distSegmToWire = -1;
        if (sl == 1 || sl == 3) {
          // RPhi SL
          distSegmToWire = fabs(wirePosInChamber.x() - segPosAtZWire.x());
        } else if (sl == 2) {
          // RZ SL
          distSegmToWire = fabs(wirePosInChamber.y() - segPosAtZWire.y());
        }

        if (distSegmToWire > 2.1)
          edm::LogVerbatim("DTDQM|DTMonitorModule|DTResolutionAnalysisTask")
              << "  Warning: dist segment-wire: " << distSegmToWire << endl;

        double residual = distRecHitToWire - distSegmToWire;
        // FIXME: Fill the histos
        fillHistos(wireId.superlayerId(), distSegmToWire, residual);

      }  // End of loop over 1D RecHit inside 4D segment
    }    // End of loop over the rechits of this ChamerId
  }
  // -----------------------------------------------------------------------------
}

// Book a set of histograms for a given SL
void DTResolutionAnalysisTask::bookHistos(DQMStore::IBooker& ibooker, DTSuperLayerId slId) {
  edm::LogVerbatim("DTDQM|DTMonitorModule|DTResolutionAnalysisTask") << "   Booking histos for SL: " << slId << endl;

  // Compose the chamber name
  stringstream wheel;
  wheel << slId.wheel();
  stringstream station;
  station << slId.station();
  stringstream sector;
  sector << slId.sector();
  stringstream superLayer;
  superLayer << slId.superlayer();

  string slHistoName = "_W" + wheel.str() + "_St" + station.str() + "_Sec" + sector.str() + "_SL" + superLayer.str();

  ibooker.setCurrentFolder(topHistoFolder + "/Wheel" + wheel.str() + "/Sector" + sector.str() + "/Station" +
                           station.str());
  // Create the monitor elements
  vector<MonitorElement*> histos;
  // Note the order matters
  histos.push_back(ibooker.book1D(
      "hResDist" + slHistoName, "Residuals on the distance from wire (rec_hit - segm_extr) (cm)", 200, -0.4, 0.4));
  histosPerSL[slId] = histos;
}

// Fill a set of histograms for a given SL
void DTResolutionAnalysisTask::fillHistos(DTSuperLayerId slId, float distExtr, float residual) {
  vector<MonitorElement*> histos = histosPerSL[slId];
  histos[0]->Fill(residual);
}

// Local Variables:
// show-trailing-whitespace: t
// truncate-lines: t
// End: