#include <OptOSensor2D.h>

Inheritance diagram for OptOSensor2D:

Public Member Functions
void	constructSolidShape () override

ALIdouble *	convertPointToLocalCoordinates (const CLHEP::Hep3Vector &point)

void	defaultBehaviour (LightRay &lightray, Measurement &meas) override

void	detailedTraversesLightRay (LightRay &lightray) override

void	fastTraversesLightRay (LightRay &lightray) override

void	fillExtraEntry (std::vector< ALIstring > &wordlist) override

void	makeMeasurement (LightRay &lightray, Measurement &meas) override

	OptOSensor2D ()

	OptOSensor2D (OpticalObject *parent, const ALIstring &type, const ALIstring &name, const ALIbool copy_data)

	~OptOSensor2D () override

Public Member Functions inherited from OpticalObject
void	addCoordinateEntryToList (Entry *entry)

void	addExtraEntryToList (Entry *entry)

void	addExtraEntryValueOriginalOriginalToList (ALIdouble entry_value)

void	addExtraEntryValueOriginalToList (ALIdouble entry_value)

void	addExtraEntryValueToList (ALIdouble entry_value)

double	addPii (double val)

double	approxTo0 (double val)

CLHEP::HepRotation	buildRmFromEntryValuesOriginalOriginal ()

const CLHEP::Hep3Vector &	centreGlob () const

const CLHEP::Hep3Vector &	centreGlobal () const

const CLHEP::Hep3Vector &	centreGlobOriginal () const

const CLHEP::Hep3Vector &	centreGlobOriginalOriginal () const

const CLHEP::Hep3Vector	centreLocal () const

int	checkMatrixEquations (double angleX, double angleY, double angleZ, CLHEP::HepRotation *rot=nullptr)

void	construct ()

void	constructFromOptAligInfo (const OpticalAlignInfo &oaInfo)

virtual void	constructMaterial ()

const std::vector< Entry * > &	CoordinateEntryList () const

void	createComponentOptOsFromOptAlignInfo ()

virtual void	detailedDeviatesLightRay (LightRay &lightray)

double	diff2pi (double ang1, double ang2)

void	displaceCentreGlob (const XYZcoor coor, const ALIdouble disp)

void	displaceCentreGlob (const CLHEP::Hep3Vector &dispVec)

void	displaceCentreGlobOriginal (const XYZcoor coor, const ALIdouble disp)

void	displaceCentreGlobOriginal (const CLHEP::Hep3Vector &dispVec)

void	displaceCentreGlobOriginalOriginal (const XYZcoor coor, const ALIdouble disp)

void	displaceCentreGlobOriginalOriginal (const CLHEP::Hep3Vector &dispVec)

void	displaceExtraEntry (const ALIuint entryNo, const ALIdouble disp)

void	displaceExtraEntryOriginal (const ALIuint entryNo, const ALIdouble disp)

void	displaceExtraEntryOriginalOriginal (const ALIuint entryNo, const ALIdouble disp)

void	displaceRmGlobAroundGlobal (OpticalObject *opto1stRotated, const XYZcoor coor, const ALIdouble disp)

void	displaceRmGlobAroundLocal (OpticalObject *opto1stRotated, const XYZcoor coor, const ALIdouble disp)

void	displaceRmGlobOriginal (const OpticalObject *opto1stRotated, const XYZcoor coor, const ALIdouble disp)

void	displaceRmGlobOriginalOriginal (const OpticalObject *opto1stRotated, const XYZcoor coor, const ALIdouble disp)

bool	eq2ang (double ang1, double ang2)

const std::vector< Entry * > &	ExtraEntryList () const

const ALIint	extraEntryNo (const ALIstring &entry_name) const

std::vector< ALIdouble > &	ExtraEntryValueList ()

const std::vector< ALIdouble > &	ExtraEntryValueOriginalList ()

const std::vector< ALIdouble > &	ExtraEntryValueOriginalOriginalList ()

virtual void	fastDeviatesLightRay (LightRay &lightray)

virtual void	fillIguana ()

virtual void	fillVRML ()

const ALIdouble	findExtraEntryValue (const ALIstring &eename) const

const ALIbool	findExtraEntryValueIfExists (const ALIstring &eename, ALIdouble &value) const

const ALIdouble	findExtraEntryValueMustExist (const ALIstring &eename) const

const ALIuint	getCmsswID () const

std::vector< ALIstring >	getCoordinateFromOptAlignParam (const OpticalAlignParam &oaParam)

CLHEP::Hep3Vector	getDisplacementInLocalCoordinates (const XYZcoor coor, const ALIdouble disp)

const double	getEntryCentre (const XYZcoor coor) const

const double	getEntryCentre (const ALIstring &coor) const

const double	getEntryRMangle (const XYZcoor coor) const

const double	getEntryRMangle (const ALIstring &coor) const

std::vector< double >	getLocalRotationAngles (const std::vector< Entry * > &entries) const

CocoaMaterialElementary *	getMaterial () const

ALIPlane	getPlate (const ALIbool forwardPlate, const ALIbool applyWedge)

std::vector< double >	getRotationAnglesFromMatrix (CLHEP::HepRotation &rmLocal, const std::vector< Entry * > &entries) const

std::vector< double >	getRotationAnglesInOptOFrame (const OpticalObject optoAncestor, const std::vector< Entry > &entries) const

CocoaSolidShape *	getSolidShape () const

CLHEP::Hep3Vector	getZAxis ()

const ALIuint	ID () const

const ALIstring	longName () const

Measurement *	meas ()

const ALIstring &	name () const

	OpticalObject ()

	OpticalObject (OpticalObject *parent, const ALIstring &type, const ALIstring &name, const ALIbool copy_data)

const OpticalObject *	parent () const

virtual void	participateInMeasurement (LightRay &lightray, Measurement &meas, const ALIstring &behav)

void	propagateGlobalRMOriginalOriginalChangeToChildren (const CLHEP::HepRotation &rmorioriold, const CLHEP::HepRotation &rmoriorinew)

void	resetGlobalCoordinates ()

void	resetOriginalOriginalCoordinates ()

const CLHEP::HepRotation &	rmGlob () const

const CLHEP::HepRotation &	rmGlobOriginal () const

const CLHEP::HepRotation &	rmGlobOriginalOriginal () const

const CLHEP::HepRotation	rmLocal () const

void	setCmsswID (ALIuint id)

void	setExtraEntryValue (const ALIuint entryNo, const ALIdouble disp)

void	setGlobalCoordinates ()

void	setGlobalRMOriginalOriginal (const CLHEP::HepRotation &rmoriori)

void	setID (ALIuint id)

void	setMeas (Measurement *meas)
	set current measurement More...

void	setOriginalEntryValues ()

void	setRmGlobal (const CLHEP::HepRotation &rm)

void	setRmGlobalOriginal (const CLHEP::HepRotation &rm)

void	setType (const ALIstring &type)

const ALIstring	shortName () const

const ALIstring &	type () const

virtual void	userDefinedBehaviour (LightRay &lightray, Measurement &meas, const ALIstring &behav)

virtual	~OpticalObject ()

Private Attributes
DeviationsFromFileSensor2D *	deviFromFile

ALIbool	fdevi_from_file

Additional Inherited Members
Protected Attributes inherited from OpticalObject
CocoaMaterialElementary *	theMaterial

CocoaSolidShape *	theSolidShape

ALIint	verbose

Detailed Description

Definition at line 19 of file OptOSensor2D.h.

Constructor & Destructor Documentation

OptOSensor2D::OptOSensor2D ( )

inline

Definition at line 22 of file OptOSensor2D.h.

22 {};

OptOSensor2D::OptOSensor2D	(	OpticalObject *	parent,
		const ALIstring &	type,
		const ALIstring &	name,
		const ALIbool	copy_data
	)

inline

Definition at line 23 of file OptOSensor2D.h.

24 : OpticalObject(parent, type, name, copy_data), fdevi_from_file(false){};

type

Definition: HCALResponse.h:21

OpticalObject::OpticalObject

OpticalObject()

Definition: OpticalObject.h:40

OptOSensor2D::fdevi_from_file

ALIbool fdevi_from_file

Definition: OptOSensor2D.h:51

OpticalObject::name

const ALIstring & name() const

Definition: OpticalObject.h:58

OptOSensor2D::~OptOSensor2D ( )

inlineoverride

Definition at line 25 of file OptOSensor2D.h.

References constructSolidShape(), convertPointToLocalCoordinates(), defaultBehaviour(), detailedTraversesLightRay(), fastTraversesLightRay(), fillExtraEntry(), OpticalObject::fillIguana(), OpticalObject::fillVRML(), makeMeasurement(), OpticalObject::meas(), and point.

25 {};

Member Function Documentation

void OptOSensor2D::constructSolidShape ( )

overridevirtual

Reimplemented from OpticalObject.

Definition at line 452 of file OptOSensor2D.cc.

References GlobalOptionMgr::getGlobalOptionValue(), GlobalOptionMgr::getInstance(), and visualization-live-secondInstance_cfg::m.

Referenced by ~OptOSensor2D().

                                        {
   ALIdouble go;
   GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
   gomgr->getGlobalOptionValue("VisScale", go);
 
   theSolidShape = new CocoaSolidShapeBox(
       "Box", go * 4. * cm / m, go * 4. * cm / m, go * 1. * cm / m);  //COCOA internal units are meters
 }

ALIdouble * OptOSensor2D::convertPointToLocalCoordinates ( const CLHEP::Hep3Vector & point )

Definition at line 399 of file OptOSensor2D.cc.

References cuy::col, gather_cfg::cout, ALIUtils::debug, ALIUtils::dump3v(), ALIUtils::dumprm(), OpticalObject::fillIguana(), and OpticalObject::fillVRML().

Referenced by ~OptOSensor2D().

                                                                                     {
   ALIdouble* interslc = new ALIdouble[2];
 
   //----- X value
   CLHEP::HepRotation rmt = rmGlob();
   CLHEP::Hep3Vector XAxism(1., 0., 0.);
   XAxism *= rmt;
   if (ALIUtils::debug >= 5)
     ALIUtils::dump3v((this)->centreGlob(), "centre glob sensor2D");
   if (ALIUtils::debug >= 5)
     ALIUtils::dumprm(rmt, "rotation matrix sensor2D");
   //t  ALIUtils::dump3v(point - (this)->centreGlob() , "inters - (this)->centreGlob()");
   if (ALIUtils::debug >= 5)
     ALIUtils::dump3v(XAxism, "XAxism");
   interslc[0] = (point - (this)->centreGlob()) * XAxism;
 
   //----- Y value
   CLHEP::Hep3Vector YAxism(0., 1., 0.);
   YAxism *= rmt;
   if (ALIUtils::debug >= 5)
     ALIUtils::dump3v(YAxism, "YAxism");
   interslc[1] = (point - (this)->centreGlob()) * YAxism;
 
   if (ALIUtils::debug >= 5) {
     std::cout << " intersection in local coordinates: X= " << interslc[0] << "  Y= " << interslc[1] << std::endl;
     ALIUtils::dump3v(point - (this)->centreGlob(), " inters - centre ");
   }
   return interslc;
 }

void OptOSensor2D::defaultBehaviour	(	LightRay &	lightray,
		Measurement &	meas
	)

overridevirtual

Reimplemented from OpticalObject.

Definition at line 35 of file OptOSensor2D.cc.

Referenced by ~OptOSensor2D().

35 { makeMeasurement(lightray, meas); }

OptOSensor2D::makeMeasurement

void makeMeasurement(LightRay &lightray, Measurement &meas) override

Definition: OptOSensor2D.cc:40

void OptOSensor2D::detailedTraversesLightRay ( LightRay & lightray )

overridevirtual

Reimplemented from OpticalObject.

Definition at line 247 of file OptOSensor2D.cc.

References DeviationsFromFileSensor2D::apply(), beam_dqm_sourceclient-live_cfg::cerr, gather_cfg::cout, ALIUtils::debug, LightRay::dumpData(), LightRay::intersect(), Skims_PA_cff::name, LightRay::point(), LightRay::refract(), DeviationsFromFileSensor2D::setApply(), LightRay::setPoint(), and ApeEstimator_cff::width.

Referenced by ~OptOSensor2D().

                                                                {
   if (ALIUtils::debug >= 4)
     std::cout << "%%% LR: DETAILED TRAVERSES SENSOR2D  " << name() << std::endl;
   if (DeviationsFromFileSensor2D::apply() && fdevi_from_file) {
     DeviationsFromFileSensor2D::setApply(false);
     //- std::cout << "fdeviFromFile" << fdevi_from_file << std::endl;
     if (ALIUtils::debug >= 0)
       std::cerr << "!!WARNING: sensor " << name()
                 << " has read deviation from file and it will not be taken into account. Please use FAST TRAVERSES"
                 << deviFromFile << std::endl;
   }
 
   //---------- If width is 0, just keep the intersection point
   ALIdouble width = findExtraEntryValue("width");
   if (width == 0) {
     //---------- Get intersection
     CLHEP::Hep3Vector ZAxis(0., 0, 1.);
     CLHEP::HepRotation rmt = rmGlob();
     ZAxis = rmt * ZAxis;
     lightray.intersect(ALIPlane(centreGlob(), ZAxis));
     CLHEP::Hep3Vector inters = lightray.point();
     lightray.setPoint(inters);
     if (ALIUtils::debug >= 2) {
       lightray.dumpData("LightRay Sensor2D traversed: ");
     }
     return;
   }
 
   if (ALIUtils::debug >= 4)
     std::cout << std::endl << "$$$ LR: REFRACTION IN FORWARD PLATE " << std::endl;
   //---------- Get forward plate
   ALIPlane plate = getPlate(true, true);
   //---------- Refract while entering object
   ALIdouble refra_ind1 = 1.;
   ALIdouble refra_ind2 = findExtraEntryValueMustExist("refra_ind");
   lightray.refract(plate, refra_ind1, refra_ind2);
 
   if (ALIUtils::debug >= 4)
     std::cout << std::endl << "$$$ LR: REFRACTION IN BACKWARD PLATE " << std::endl;
   //---------- Get backward plate
   plate = getPlate(false, true);
   //---------- Refract while exiting splitter
   lightray.refract(plate, refra_ind2, refra_ind1);
 
   CLHEP::Hep3Vector inters = lightray.point();
   lightray.setPoint(inters);
 
   if (ALIUtils::debug >= 4) {
     lightray.dumpData("LightRay Sensor2D traversed: ");
   }
 }

void OptOSensor2D::fastTraversesLightRay ( LightRay & lightray )

overridevirtual

Reimplemented from OpticalObject.

Definition at line 119 of file OptOSensor2D.cc.

References DeviationsFromFileSensor2D::apply(), gather_cfg::cout, ALIUtils::debug, LightRay::dumpData(), Exception, cuy::ii, LightRay::intersect(), ALIUtils::LengthValueDimensionFactor(), Model::MeasurementList(), Skims_PA_cff::name, LightRay::point(), LightRay::setPoint(), LightRay::shiftAndDeviateWhileTraversing(), and Measurement::value().

Referenced by ~OptOSensor2D().

                                                            {
   verbose = ALIUtils::debug;
   if (ALIUtils::debug >= 2)
     std::cout << "LR: FAST TRAVERSES SENSOR2D  " << name() << std::endl;
 
   //---------- Shift and Deviate
 
   //---------- Get intersection
   CLHEP::Hep3Vector ZAxis(0., 0, 1.);
   CLHEP::HepRotation rmt = rmGlob();
   ZAxis = rmt * ZAxis;
   lightray.intersect(ALIPlane(centreGlob(), ZAxis));
   CLHEP::Hep3Vector inters = lightray.point();
 
   ALIdouble deviX, deviY, devi;
   // if deviationsFromFile are applied and this sensors has them get the deviations that corresponds to the intersection point.
   // Set this deviation as original one, as it will not be changed for derivatives
   if (DeviationsFromFileSensor2D::apply() && fdevi_from_file) {
     //-    std::cout << " DeviationsFromFileSensor2D::apply() " << DeviationsFromFileSensor2D::apply() << std::endl;
     if (ALIUtils::debug >= 4) {
       std::cout << "fdeviFromFile" << fdevi_from_file << std::endl;
       //-      std::cout << "deviFromFile" << deviFromFile << std::endl;
     }
     //--------- get measurement value of the current sensor
     std::vector<Measurement*>& measv = Model::MeasurementList();
     unsigned int ii;
     Measurement* omeas = nullptr;
     for (ii = 0; ii < measv.size(); ii++) {
       //-   std::cout << " sensor2d finding meas " <<  measv[ii]->sensorName() << " " << name() << std::endl;
       if (measv[ii]->sensorName() == name()) {
         omeas = measv[ii];
         break;
       }
     }
     if (omeas == nullptr) {
       throw cms::Exception("LogicError") << "@SUB=OptOSensor2D::fastTraversesLightRay\n"
                                          << "meas " << name() << " not found";
     }
 
     ALIdouble interslcx = omeas->value(0);
     ALIdouble interslcy = omeas->value(1);
     if (ALIUtils::debug >= 5)
       std::cout << " interslcx " << interslcx << " interslcy " << interslcy << std::endl;
     //----- transform in milimeters and positive
     //mum    interslcx = interslcx*1.E6 + 10000.;
     //mum    interslcy = interslcy*1.E6 + 10000.;
     ALIdouble df = ALIUtils::LengthValueDimensionFactor();
     interslcx = interslcx / df + 0.010 / df;
     interslcy = interslcy / df + 0.010 / df;
     if (ALIUtils::debug >= 5)
       std::cout << " interslcx " << interslcx << " interslcy " << interslcy << std::endl;
 
     //---------- Get deviations from file (they are in microrads)
     std::pair<ALIdouble, ALIdouble> devis = deviFromFile->getDevis(interslcx, interslcy);
     deviX = devis.second;
     deviY = -devis.first;
     // deviX = devis.first;
     //  deviY = devis.second;
 
     //o  deviX = *((deviFromFile->deviationsInX()).begin() + pointY*deviFromFile->nPoints() + pointX) * 1.E-6;;
     //o  deviY = *((deviFromFile->deviationsInY().begin()) + pointY*deviFromFile->nPoints() + pointX) * 1.E-6;
 
     //---------- Set this deviation value as original one, as it will not be changed for derivatives (change the entry and also the ExtraEntryValueOriginalList())
     ALIuint entryNo = extraEntryNo("deviX");
     if (verbose >= 3)
       std::cout << "entrynox" << entryNo << name() << verbose << std::endl;
     Entry* entryDeviX = *(ExtraEntryList().begin() + entryNo);
     entryDeviX->setValue(deviX);
     //-    std::vector< ALIdouble >::const_iterator eevolite = static_cast<std::vector< ALIdouble >::iterator>( ExtraEntryValueOriginalList().begin() );
     std::vector<ALIdouble> eevil = ExtraEntryValueOriginalList();
     //-    std::vector< ALIdouble >::const_iterator eevolite = ( ExtraEntryValueOriginalList().begin() );
     std::vector<ALIdouble>::iterator eevolite = eevil.begin();
 
     *(eevolite + entryNo) = deviX;
     if (verbose >= 3)
       std::cout << " entryDeviX name " << entryDeviX->name() << entryDeviX->value() << std::endl;
     entryNo = extraEntryNo("deviY");
     Entry* entryDeviY = *(ExtraEntryList().begin() + entryNo);
     //- std::cout << "entrynoy" << entryNo << name() << std::endl;
     entryDeviY->setValue(deviY);
     *(eevolite + entryNo) = deviY;
     //-  std::cout<< entryDeviY << " entryDeviY name " << entryDeviY->name() << entryDeviY->value() << std::endl;
 
   } else {
     deviX = findExtraEntryValue("deviX");
     deviY = findExtraEntryValue("deviY");
 
     //??? why previous does not work??
     if (fdevi_from_file) {
       if (ALIUtils::debug >= 5)
         std::cout << "fdeviFromFile" << fdevi_from_file << std::endl;
       ALIuint entryNo = extraEntryNo("deviX");
       Entry* entryDeviX = *(ExtraEntryList().begin() + entryNo);
       if (verbose >= 3)
         std::cout << entryDeviX << " entryDeviX name " << entryDeviX->name() << entryDeviX->value() << std::endl;
       deviX = entryDeviX->value();
       entryNo = extraEntryNo("deviY");
       Entry* entryDeviY = *(ExtraEntryList().begin() + entryNo);
       if (verbose >= 3)
         std::cout << entryDeviY << " entryDeviY name " << entryDeviY->name() << entryDeviY->value() << std::endl;
       deviY = entryDeviY->value();
 
     } else {
       ALIbool bb = findExtraEntryValueIfExists("devi", devi);
       if (bb) {
         deviX = devi;
         deviY = devi;
       }
       if (ALIUtils::debug >= 4) {
         std::cout << "devi " << devi << " devi x  " << deviX << " devi y  " << deviY << std::endl;
       }
     }
   }
   if (ALIUtils::debug >= 4) {
     std::cout << " devi x  " << deviX << " devi y  " << deviY << std::endl;
   }
 
   lightray.setPoint(inters);
 
   lightray.shiftAndDeviateWhileTraversing(this, 'T');
   if (ALIUtils::debug >= 2) {
     lightray.dumpData("Shifted and Deviated");
   }
 }

void OptOSensor2D::fillExtraEntry ( std::vector< ALIstring > & wordlist )

overridevirtual

Reimplemented from OpticalObject.

Definition at line 302 of file OptOSensor2D.cc.

References gather_cfg::cout, ALIUtils::debug, OpticalObject::fillExtraEntry(), ALIUtils::getFloat(), ALIFileIn::getInstance(), ALIFileIn::getWordsInLine(), and LaserClient_cfi::wl.

Referenced by ~OptOSensor2D().

                                                                 {
   if (ALIUtils::debug >= 5)
     std::cout << "OptOSensor2D fillExtraEntry wordlist[1] " << wordlist[1] << std::endl;
   //---------- check if it is deviation read from file
   fdevi_from_file = false;
   //-  std::cout << "WL " << wordlist[1]<< "WL " << wordlist[2]<< "WL " << wordlist[3] << std::endl;
   if (wordlist[1] == ALIstring("devi") && wordlist[2] == ALIstring("from_file")) {
     //---------- Open file
     ALIstring fnam;
     if (wordlist.size() >= 4) {
       fnam = wordlist[3];
     } else {
       //----- Build up file name if it does not exists
       fnam = "dat/devi-";
       fnam += shortName();
       fnam += ".dat";
     }
 
     ALIFileIn& ifdevi = ALIFileIn::getInstance(fnam);
 
     //----- Check that file exists
     if (ALIUtils::debug >= 4)
       std::cout << "Opening deviation file: " << fnam << std::endl;
     /*-    if( !ifdevi ) {
       std::cerr << " !!! Sensor2D Deviation file not found: " << fnam << " of object " << name() << std::endl;
       exit(1);
       }*/
 
     deviFromFile = new DeviationsFromFileSensor2D();
     fdevi_from_file = true;
     if (ALIUtils::debug >= 5)
       std::cout << "deviFromFile " << deviFromFile << std::endl;
     //----- Read header
     ALIstring sensor1_name, sensor2_name;
     ALIdouble sensor_dist;
     ALIdouble prec_deviX, prec_deviY;
 
     std::vector<ALIstring> wl;
     ifdevi.getWordsInLine(wl);
     sensor1_name = wl[0];
     sensor2_name = wl[1];
     sensor_dist = atof(wl[2].c_str());
     // 'c' means that light is traversing the glass
     if (sensor1_name[sensor1_name.size() - 2] == 'c') {
       sensor1_name = sensor1_name.substr(0, sensor1_name.size() - 1);
     }
     if (sensor2_name[sensor2_name.size() - 2] == 'c') {
       sensor2_name = sensor2_name.substr(0, sensor2_name.size() - 1);
     }
     if (ALIUtils::debug >= 5)
       std::cout << "sensor1_name " << sensor1_name << " sensor2_name " << sensor2_name << " sensor_dist " << sensor_dist
                 << " unknown " << wl[3] << std::endl;
 
     ifdevi.getWordsInLine(wl);
     prec_deviX = atof(wl[0].c_str());
     prec_deviY = atof(wl[1].c_str());
 
     if (ALIUtils::debug >= 5)
       std::cout << "prec_deviX " << prec_deviX << " prec_deviY " << prec_deviY << std::endl;
 
     deviFromFile = new DeviationsFromFileSensor2D();
     ALIdouble offsetX, offsetY;
     if (wl.size() == 5) {
       offsetX = ALIUtils::getFloat(wl[3]);
       offsetY = ALIUtils::getFloat(wl[4]);
       deviFromFile->setOffset(offsetX, offsetY);
     }
     deviFromFile->readFile(ifdevi);
     fdevi_from_file = true;
     if (ALIUtils::debug >= 5)
       std::cout << "deviFromFile " << deviFromFile << std::endl;
 
     //--- Fill extra entries 'deviX' & 'deviY' to compute derivatives
     std::vector<ALIstring> wlo;
     char chartmp[20];
     wlo.push_back(wordlist[0]);
     wlo.push_back("deviX");
     wlo.push_back("0");  // value is set to 0 as it is on the file and the point of intersection is not computed yet
     gcvt(prec_deviX, 10, chartmp);
     wlo.push_back(ALIstring(chartmp));
     wlo.push_back("cal");
     std::vector<ALIstring> wl2(wlo);
     OpticalObject::fillExtraEntry(wlo);
 
     wl2[1] = "deviY";
     gcvt(prec_deviY, 10, chartmp);
     wl2[3] = ALIstring(chartmp);
     OpticalObject::fillExtraEntry(wl2);
 
   } else {
     OpticalObject::fillExtraEntry(wordlist);
   }
 }

void OptOSensor2D::makeMeasurement	(	LightRay &	lightray,
		Measurement &	meas
	)

overridevirtual

Reimplemented from OpticalObject.

Definition at line 40 of file OptOSensor2D.cc.

References funct::abs(), gather_cfg::cout, ALIUtils::debug, LightRay::direction(), ALIUtils::dump3v(), MillePedeFileConverter_cfg::e, LightRay::intersect(), Skims_PA_cff::name, class-composition::parent, LightRay::point(), Measurement::setLightRayDirection(), Measurement::setLightRayPosition(), Measurement::setValueSimulated(), Measurement::value(), Measurement::valueSimulated(), and Measurement::valueType().

Referenced by ~OptOSensor2D().

                                                                         {
   //---------- check is last and not the only one
   /*    if( vocite - OptOList().begin() == 0 ||
     OptOList().end() - vocite != 1) {
     std::cerr << " last and not only one Optical Object should be 'sensor2D' (unless you specify (:T)raverse) " <<
     OptOList().end() - vocite << " size " <<OptOList().size() << std::endl;
     DumpBadOrderOptOs(); 
     }*/
 
   //---------- Get simulated value
   //---------- Get intersection
   CLHEP::Hep3Vector ZAxis(0., 0, 1.);
   CLHEP::HepRotation rmt = rmGlob();
   ZAxis = rmt * ZAxis;
   if (ALIUtils::debug >= 4) {
     ALIUtils::dump3v(centreGlob(), " sensor2D centre Glob ");
     ALIUtils::dump3v(ZAxis, " snsor2D normal ");
   }
   //-  ALIUtils::dumprm( rmt, "rot global " );
   lightray.intersect(ALIPlane(centreGlob(), ZAxis));
   CLHEP::Hep3Vector inters = lightray.point();
 
   ALIdouble* interslc;
   interslc = convertPointToLocalCoordinates(inters);
   ALIdouble interslcx = interslc[0];
   ALIdouble interslcy = interslc[1];
   meas.setValueSimulated(0, interslcx);
   meas.setValueSimulated(1, interslcy);
 
   //----- Dump info
   if (ALIUtils::debug >= 2) {
     //--- Special for range studies
     ALIstring chrg = "";
     /*t    if(Model::Ncmslinkrange >= 1 && Model::Ncmslinkrange <= 8 ) {
       chrg = "RG";
     } else {
       chrg = "";
       } t*/
     CLHEP::Hep3Vector measvv(meas.value()[0], meas.value()[1], 0.);
     measvv = rmt * measvv;
     ALIUtils::dump3v(measvv, " $$$$$$MEAS IN LOCAL FRAME");
     ALIUtils::dump3v(measvv + centreGlob(), " $$$$$$MEAS IN GLOBAL FRAME");
 
     ALIdouble detH = 1000 * meas.valueSimulated(0);
     if (std::abs(detH) <= 1.e-9)
       detH = 0.;
     ALIdouble detV = 1000 * meas.valueSimulated(1);
     if (std::abs(detV) <= 1.e-9)
       detV = 0.;
     std::cout << "REAL value: " << chrg << meas.valueType(0) << ": " << 1000 * meas.value()[0] << chrg << " "
               << meas.valueType(1) << ": " << 1000 * meas.value()[1] << " (mm)  " << (this)->name()
               << "   DIFF= " << detH - 1000 * meas.value()[0] << " " << detV - 1000 * meas.value()[1] << std::endl;
     std::cout << "SIMU value: " << chrg << " " << meas.valueType(0)
               << ": "
               // << setprecision(3) << setw(4)
               << detH << chrg << " " << meas.valueType(1) << ": " << detV << " (mm)  " << (this)->name() << std::endl;
     /*-    std::cout << "SIMU value: " << chrg << " " << meas.valueType(0) << ": "
       // << setprecision(3) << setw(4)
               << detH / 0.3125
           << chrg << " " << meas.valueType(1) << ": " << detV / 0.3125
           << " STRIPS  " << (this)->name() << std::endl; */
     //   << detH
     //   << chrg << " V: " << detV
     //   << " (mm)  " << (this)->name() << std::endl;
     ALIUtils::dump3v(1000. * (inters - parent()->centreGlob()), " $$$$$$SIMU inters - parent centre");
     ALIUtils::dump3v(1000. * (inters - centreGlob()), " $$$$$$SIMU inters - centre");
   }
   //t    delete &lightray;
 
   // store the lightray position and direction
   meas.setLightRayPosition(lightray.point());
   meas.setLightRayDirection(lightray.direction());
 
   delete[] interslc;
 }

Member Data Documentation

DeviationsFromFileSensor2D* OptOSensor2D::deviFromFile

private

Definition at line 50 of file OptOSensor2D.h.

ALIbool OptOSensor2D::fdevi_from_file

private

Definition at line 51 of file OptOSensor2D.h.

Public Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation