CastorGeometryData.h File Reference

Go to the source code of this file.

Variables
static const double	dXEMPlate = 48.0
static const double	dXHADPlate = 48.0
static const double	dYEMPlate = 62.5
static const double	dYHADPlate = 320.0
static const double	theHadmodulesBoundaries []
static const double	theSectorBoundaries []
static const double	theXChannelBoundaries [] = {-48.0, -28.8, -9.6, 9.6, 28.8}
static const double	theZHadChannelBoundaries []
static const double	theZSectionBoundaries [] = {14385., 14488.}
static const double	tiltangle = 0.7854
static const double	X0 = 0.
static const double	Y0 = 0.
static const double	Z0 = 14385.0

Variable Documentation

const double dXEMPlate = 48.0

static

Definition at line 36 of file CastorGeometryData.h.

Referenced by CastorHardcodeGeometryLoader::init().

const double dXHADPlate = 48.0

static

Definition at line 37 of file CastorGeometryData.h.

Referenced by CastorHardcodeGeometryLoader::init().

const double dYEMPlate = 62.5

static

Definition at line 34 of file CastorGeometryData.h.

Referenced by CastorHardcodeGeometryLoader::init().

const double dYHADPlate = 320.0

static

Definition at line 35 of file CastorGeometryData.h.

Referenced by CastorHardcodeGeometryLoader::init().

const double theHadmodulesBoundaries[]

static

Initial value:

= {
    14488., 14589., 14690., 14791., 14892., 14993., 15094., 15195., 15296., 15397., 15498., 15599.}

Definition at line 48 of file CastorGeometryData.h.

const double theSectorBoundaries[]

static

Initial value:

= {0.,
                                             0.21817,
                                             0.4363,
                                             0.6545,
                                             0.87267,
                                             1.0908,
                                             1.309,
                                             1.52718,
                                             1.74535,
                                             1.9635,
                                             2.1817,
                                             2.39986,
                                             2.618,
                                             2.8362,
                                             3.05437,
                                             3.27254}

Definition at line 50 of file CastorGeometryData.h.

const double theXChannelBoundaries[] = {-48.0, -28.8, -9.6, 9.6, 28.8}

static

Definition at line 41 of file CastorGeometryData.h.

Referenced by ZdcShowerLibrary::getEnergyFromLibrary(), and ZdcShowerLibrary::getHits().

const double theZHadChannelBoundaries[]

static

Initial value:

= {
    -257.4,
    118.2,
    21.0,
    160.2,
}

Definition at line 42 of file CastorGeometryData.h.

Referenced by ZdcShowerLibrary::getHits().

const double theZSectionBoundaries[] = {14385., 14488.}

static

Definition at line 40 of file CastorGeometryData.h.

Referenced by ZdcShowerLibrary::getHits().

const double tiltangle = 0.7854

static

Definition at line 39 of file CastorGeometryData.h.

const double X0 = 0.

static

the ZSection position gives the absolute-value z limits for each section (EM, HAD) |||{ Al }///////////// ^EM part^ HAD part ^ | | | z-had z-em

the SectorBoundaries define the sector for each section 13,14 \15,16 |1,2 /3,4

• - 11,12 /9,10 |7,8 \5,6

theXChannelBoundaries positions are the x low limits for each channel (EM section) theZHadChannelBoundaries are the z low limits for each HAD channel at y = 0 position the coordinates are given with respect to the center of the enclosing volume as defined in the geometry: X0,Z0,Y0 tiltangle is the 45 deg angle of the plates dXEMPlate, dXHADPlate is the half width of EM, HAD plates dYEMPlate, dyHADPlate is half height (DY/2) of the EM, HAD sections dXAll is the half width (DX/2) of all sections all dimmensions are in mm and rads

NOTE not final

Panos Katsas, September 2007.

Definition at line 31 of file CastorGeometryData.h.

const double Y0 = 0.

static

Definition at line 33 of file CastorGeometryData.h.

Referenced by ZdcShowerLibrary::getHits().

const double Z0 = 14385.0

static

Definition at line 32 of file CastorGeometryData.h.

Referenced by ZdcShowerLibrary::getHits(), GflashTrajectory::initializeTrajectory(), and TTStubAlgorithm_official< T >::PatternHitCorrelation().