Classes
class	TexTemplate
Functions
def	create (alignables, pedeDump, additionalData, outputFile, config)
Function Documentation

def pdfCreator.create	(	alignables,
		pedeDump,
		additionalData,
		outputFile,
		config
	)
Definition at line 19 of file pdfCreator.py.
References any(), ConfigBuilder.dumpPython(), and split.
 def create(alignables, pedeDump, additionalData, outputFile, config):
     logger = logging.getLogger("mpsvalidate")
 
     # load template
     with open(os.path.join(config.mpspath, "templates",
                            "mpsvalidate_tex_template.tex")) as template:
         data = template.read()
         template.close()
 
     # create object where data could be substituted
     data = TexTemplate(data)
 
     # output string
     out = ""
     
     # title page
     if (config.message):
         out += """\\begin{{titlepage}}
                     \centering
                     \\vspace*{{4cm}}
                     \Huge\\bfseries Alignment Validation\par
                     \\vspace{{2cm}} 
                     \scshape\huge Alignment Campaign\\\\ {{{0}}}\par
                     \\vfill
                     \large \\today\par
                     \\end{{titlepage}}
                     \\tableofcontents
                     \\newpage""".format(config.message)
     else:
         out += """\\begin{titlepage}
                     \centering
                     \\vspace*{4cm}
                     \Huge\\bfseries Alignment Validation\par
                     \\vfill
                     \large \\today\par
                     \\end{titlepage}
                     \\tableofcontents
                     \\newpage"""
 
     # general information
 
     out += "\section{{General information}}\n"
 
     if (config.message):
         out += "Project: {{{0}}}\\\\\n".format(config.message)
     out += "Input-Path:\n"
     out += "\\begin{verbatim}\n"
     out += config.jobDataPath+"\n"
     out += "\\end{verbatim}\n"
 
     # alignment_merge.py
     try:
         out += "\subsection{Alignment Configuration}\n"
         out += "\\textbf{{PedeSteerer method:}} {{{0}}}\\\\\n".format(
             additionalData.pede_steerer_method)
         out += "\\textbf{{PedeSteerer options:}}\\\\\n"
         for line in additionalData.pede_steerer_options:
             out += "{{{0}}}\\\\\n".format(line)
         out += "\\textbf{{PedeSteerer command:}} {0}\\\\\n".format(
             additionalData.pede_steerer_command)
 
         for i in sorted(additionalData.selectors):
             out += "\\textbf{{{0}:}}\n".format(additionalData.selectors[i]["name"])
             out += "\\begin{verbatim}\n"
             for line in additionalData.selectors[i]["selector"].dumpPython().split("\n"):
                 out += line + "\n"
             out += "\\end{verbatim}\n"
 
         if len(additionalData.iov_definition) > 0:
             out += "\\textbf{{IOV defintion:}}\n"
             out += "\\begin{verbatim}\n"
             for line in additionalData.iov_definition.dumpPython().split("\n"):
                 out += line + "\n"
             out += "\\end{verbatim}\n\n"
         out += "\n"
 
     except Exception as e:
         logger.error("data not found - {0} {1}".format(type(e), e))
 
     # table of input files with number of tracks
     if config.showmonitor:
         out += "\subsection{Datasets with tracks}\n"
         out += """\\begin{table}[h]
             \centering
             \caption{Datasets with tracks}
             \\begin{tabular}{ccc}
             \hline
             Dataset & Number of used tracks & Weight \\\\
             \hline \n"""
         for monitor in mpsv_classes.MonitorData.monitors:
             out += "{0} & {1} & {2}\\\\\n".format(monitor.name, monitor.ntracks,
                                                   monitor.weight if monitor.weight != None else "--")
         try:
             if (pedeDump.nrec):
                 out += "\hline\nNumber of records & {0}\\\\\n".format(pedeDump.nrec)
         except Exception as e:
             logger.error("data not found - {0} {1}".format(type(e), e))
         out += """\hline
                   \end{tabular}\n
                   \end{table}\n"""
         out += "The information in this table is based on the monitor root files. Note that the number of tracks which where used in the pede step can differ from this table.\n"
     try:
         # pede.dump.gz
         if config.showdump:
             out += "\subsection{{Pede monitoring information}}\n"
             if (pedeDump.sumValue != 0):
                 out += r"\begin{{align*}}Sum(Chi^2)/Sum(Ndf) &= {0}\\ &= {1}\end{{align*}}".format(
                     pedeDump.sumSteps, pedeDump.sumValue)
             else:
                 out += r"\begin{{align*}}Sum(W*Chi^2)/Sum(Ndf)/<W> &= {0}\\ &= {1}\end{{align*}}".format(
                     pedeDump.sumSteps, pedeDump.sumWValue)
             out += r"with correction for down-weighting: {0}\\".format(
                 pedeDump.correction)
             out += r"Peak dynamic memory allocation: {0} GB\\".format(
                 pedeDump.memory)
             out += r"Total time: {0} h {1} m {2} s\\".format(
                 pedeDump.time[0], pedeDump.time[1], pedeDump.time[2])
             out += r"Number of records: {0}\\".format(pedeDump.nrec)
             out += r"Total number of parameters: {0}\\".format(pedeDump.ntgb)
             out += r"Number of variable parameters: {0}\\".format(pedeDump.nvgb)
             out += r"Warning:\\"
             for line in pedeDump.warning:
 
                 # check if line empty
                 if line.replace(r" ", r""):
                     out += "\\begin{verbatim}\n"
                     out += line + "\n"
                     out += "\\end{verbatim}\n"
 
             out += "\section{{Parameter plots}}\n"
     except Exception as e:
         logger.error("data not found - {0} {1}".format(type(e), e))
 
     # high level structures
     if config.showhighlevel:
         big = [x for x in config.outputList if (x.plottype == "big")]
 
         if big:
             out += "\subsection{{High-level parameters}}\n"
             for i in big:
                 out += "\includegraphics[width=\linewidth]{{{0}/plots/pdf/{1}.pdf}}\n".format(
                     config.outputPath, i.filename)
 
     # time (IOV) dependent plots
     if config.showtime:
         time = [x for x in config.outputList if (x.plottype == "time")]
 
         if time:
             out += "\subsection{{High-level parameters versus time (IOV)}}\n"
             # get list with names of the structures
             for structure in [x.name for x in time if x.parameter == "xyz"]:
                 out += "\subsubsection{{{0}}}\n".format(structure)
                 for mode in ["xyz", "rot"]:
                     if any([x.filename for x in time if (x.parameter == mode and x.name == structure)]):
                         filename = [x.filename for x in time if (x.parameter == mode and x.name == structure)][0]
                         out += "\includegraphics[width=\linewidth]{{{0}/plots/pdf/{1}.pdf}}\n".format(
                             config.outputPath, filename)
 
     # hole modules
     if config.showmodule:
         # check if there are module plots
         if any(x for x in config.outputList if (x.plottype == "mod" and x.number == "")):
             out += "\subsection{{Module-level parameters}}\n"
 
             # loop over all structures
             for moduleName in [x.name for x in alignables.structures]:
 
                 # check if there is a plot for this module
                 if any(x for x in config.outputList if (x.plottype == "mod" and x.number == "" and x.name == moduleName)):
                     out += "\subsubsection{{{0}}}\n".format(moduleName)
                     # loop over modes
                     for mode in ["xyz", "rot", "dist"]:
 
                         # get module plot
                         module = [x for x in config.outputList if (
                             x.plottype == "mod" and x.number == "" and x.name == moduleName and x.parameter == mode)]
                         # get list of sub module plots
                         moduleSub = [x for x in config.outputList if (
                             x.plottype == "subMod" and x.number != "" and x.name == moduleName and x.parameter == mode)]
 
                         # check if plot there is a plot in this mode
                         if module:
                             out += "\includegraphics[width=\linewidth]{{{0}/plots/pdf/{1}.pdf}}\n".format(
                                 config.outputPath, module[0].filename)
                             if config.showsubmodule:
                                 # loop over submodules
                                 for plot in moduleSub:
                                     out += "\includegraphics[width=\linewidth]{{{0}/plots/pdf/{1}.pdf}}\n".format(
                                         config.outputPath, plot.filename)
 
     # plot taken from the millePedeMonitor_merge.root file
     if config.showmonitor:
         if any(x for x in config.outputList if x.plottype == "monitor"):
             out += "\section{{Monitor plots}}\n"
 
             lastdataset = ""
             for plot in [x for x in config.outputList if x.plottype == "monitor"]:
                 # all plots of a dataset together in one section
                 if (lastdataset != plot.name):
                     out += "\subsection{{{0}}}\n".format(plot.name)
                 lastdataset = plot.name
                 out += "\includegraphics[width=\linewidth]{{{0}/plots/pdf/{1}.pdf}}\n".format(
                     config.outputPath, plot.filename)
 
     data = data.substitute(out=out)
 
     with open(os.path.join(config.outputPath, outputFile), "w") as output:
         output.write(data)
         output.close()
 
     # TODO run pdflatex
     for i in range(2):
         os.system("pdflatex -output-directory={0}  {1}/{2}".format(
             config.outputPath, config.outputPath, outputFile))
Classes

Functions

Function Documentation
