Inheritance diagram for SiStripLorentzAngleCalibration:

Public Member Functions
void	beginOfJob (AlignableTracker tracker, AlignableMuon muon, AlignableExtras *extras) override

void	beginRun (const edm::Run &, const edm::EventSetup &) override
	Call at beginning of run: More...

unsigned int	derivatives (std::vector< ValuesIndexPair > &outDerivInds, const TransientTrackingRecHit &hit, const TrajectoryStateOnSurface &tsos, const edm::EventSetup &setup, const EventInfo &eventInfo) const override

void	endOfJob () override

double	getParameter (unsigned int index) const override

double	getParameterError (unsigned int index) const override

unsigned int	numParameters () const override
	How many parameters does this calibration define? More...

bool	setParameter (unsigned int index, double value) override

bool	setParameterError (unsigned int index, double error) override

	SiStripLorentzAngleCalibration (const edm::ParameterSet &cfg)
	Constructor. More...

	~SiStripLorentzAngleCalibration () override=default
	Destructor. More...

Public Member Functions inherited from IntegratedCalibrationBase
virtual std::vector< Values >	derivatives (const TrackingRecHit &hit, const TrajectoryStateOnSurface &tsos, const edm::EventSetup &setup, const EventInfo &eventInfo) const

virtual unsigned int	derivatives (std::vector< ValuesIndexPair > &outDerivInds, const TrackingRecHit &hit, const TrajectoryStateOnSurface &tsos, const edm::EventSetup &setup, const EventInfo &eventInfo) const =0

virtual void	endOfLoop ()

	IntegratedCalibrationBase (const edm::ParameterSet &cfg)
	Values and their parameter index. More...

const std::string &	name () const
	name of this calibration More...

virtual void	startNewLoop ()

virtual	~IntegratedCalibrationBase ()
	Destructor. More...

Private Member Functions
SiStripLorentzAngle	createFromTree (const char fileName, const char treeName) const

double	effectiveThickness (const GeomDet *det, int16_t mode, const edm::EventSetup &setup) const
	in non-peak mode the effective thickness is reduced... More...

const SiStripLorentzAngle *	getLorentzAnglesInput (const align::RunNumber &=0)

double	getParameterForDetId (unsigned int detId, edm::RunNumber_t run) const

void	writeTree (const SiStripLorentzAngle lorentzAngle, const std::map< unsigned int, TreeStruct > &treeInfo, const char treeName) const

Private Attributes
std::map< align::RunNumber, SiStripLorentzAngle >	cachedLorentzAngleInputs_

align::RunNumber	currentIOV_ {0}

const std::vector< std::string >	mergeFileNames_

const edm::ParameterSet	moduleGroupSelCfg_

std::unique_ptr< TkModuleGroupSelector >	moduleGroupSelector_

const std::string	outFileName_

std::vector< double >	parameters_

std::vector< double >	paramUncertainties_

int16_t	readoutMode_

const std::string	readoutModeName_

const std::string	recordNameDBwrite_

const bool	saveToDB_

SiStripLorentzAngle *	siStripLorentzAngleInput_ { 0 }

edm::ESWatcher< SiStripLorentzAngleRcd >	watchLorentzAngleRcd_

Additional Inherited Members
Public Types inherited from IntegratedCalibrationBase
typedef AlignmentAlgorithmBase::EventInfo	EventInfo

typedef std::pair< double, double >	Values

typedef std::pair< Values, unsigned int >	ValuesIndexPair
	x- and y-values More...

Detailed Description

Calibration of Lorentz angle for the strip tracker, integrated in the alignment algorithms. Note that not all algorithms support this...

Use one instance for peak and/or one instance for deco mode data.

Author: : Gero Flucke date : August 2012

Revision: 1.6.2.14

Date: 2013/05/31 08:37:12

(last update by

Author: flucke

)

Definition at line 53 of file SiStripLorentzAngleCalibration.cc.

Constructor & Destructor Documentation

SiStripLorentzAngleCalibration::SiStripLorentzAngleCalibration ( const edm::ParameterSet & cfg )

explicit

Constructor.

Definition at line 139 of file SiStripLorentzAngleCalibration.cc.

References Exception, kDeconvolutionMode, kPeakMode, readoutMode_, and readoutModeName_.

     : IntegratedCalibrationBase(cfg),
       readoutModeName_(cfg.getParameter<std::string>("readoutMode")),
       saveToDB_(cfg.getParameter<bool>("saveToDB")),
       recordNameDBwrite_(cfg.getParameter<std::string>("recordNameDBwrite")),
       outFileName_(cfg.getParameter<std::string>("treeFile")),
       mergeFileNames_(cfg.getParameter<std::vector<std::string> >("mergeTreeFiles")),
       moduleGroupSelCfg_(cfg.getParameter<edm::ParameterSet>("LorentzAngleModuleGroups")) {
   // SiStripLatency::singleReadOutMode() returns
   // 1: all in peak, 0: all in deco, -1: mixed state
   // (in principle one could treat even mixed state APV by APV...)
   if (readoutModeName_ == "peak") {
     readoutMode_ = kPeakMode;
   } else if (readoutModeName_ == "deconvolution") {
     readoutMode_ = kDeconvolutionMode;
   } else {
     throw cms::Exception("BadConfig") << "SiStripLorentzAngleCalibration:\n"
                                       << "Unknown mode '" << readoutModeName_
                                       << "', should be 'peak' or 'deconvolution' .\n";
   }
 }

SiStripLorentzAngleCalibration::~SiStripLorentzAngleCalibration ( )

overridedefault

Destructor.

Member Function Documentation

void SiStripLorentzAngleCalibration::beginOfJob	(	AlignableTracker *	tracker,
		AlignableMuon *	muon,
		AlignableExtras *	extras
	)

overridevirtual

Call at beginning of job: default implementation is dummy, to be overwritten in derived class if useful.

Reimplemented from IntegratedCalibrationBase.

Definition at line 291 of file SiStripLorentzAngleCalibration.cc.

References mergeFileNames_, moduleGroupSelCfg_, moduleGroupSelector_, IntegratedCalibrationBase::name(), numParameters(), outFileName_, parameters_, paramUncertainties_, readoutModeName_, saveToDB_, SiStripDetId::TEC, SiStripDetId::TIB, SiStripDetId::TID, and SiStripDetId::TOB.

                                                                      {
   //specify the sub-detectors for which the LA is determined
   const std::vector<int> sdets = {SiStripDetId::TIB, SiStripDetId::TOB, SiStripDetId::TID, SiStripDetId::TEC};
   moduleGroupSelector_ = std::make_unique<TkModuleGroupSelector>(aliTracker, moduleGroupSelCfg_, sdets);
 
   parameters_.resize(moduleGroupSelector_->getNumberOfParameters(), 0.);
   paramUncertainties_.resize(moduleGroupSelector_->getNumberOfParameters(), 0.);
 
   edm::LogInfo("Alignment") << "@SUB=SiStripLorentzAngleCalibration"
                             << "Created with name " << this->name() << " for readout mode '" << readoutModeName_
                             << "',\n"
                             << this->numParameters() << " parameters to be determined."
                             << "\nsaveToDB = " << saveToDB_ << "\n outFileName = " << outFileName_
                             << "\n N(merge files) = " << mergeFileNames_.size()
                             << "\n number of IOVs = " << moduleGroupSelector_->numIovs();
 
   if (!mergeFileNames_.empty()) {
     edm::LogInfo("Alignment") << "@SUB=SiStripLorentzAngleCalibration"
                               << "First file to merge: " << mergeFileNames_[0];
   }
 }

void SiStripLorentzAngleCalibration::beginRun	(	const edm::Run &	run,
		const edm::EventSetup &	setup
	)

overridevirtual

Call at beginning of run:

Reimplemented from IntegratedCalibrationBase.

Definition at line 165 of file SiStripLorentzAngleCalibration.cc.

References cond::TimeTypeSpecs::beginValue, cachedLorentzAngleInputs_, edm::ESWatcher< T >::check(), currentIOV_, Exception, dataset::firstRun, edm::EventSetup::get(), edm::eventsetup::DependentRecordImplementation< RecordT, ListT >::get(), SiStripLorentzAngle::getLorentzAngles(), mps_fire::i, moduleGroupSelector_, readoutModeName_, edm::RunBase::run(), cond::runnumber, convertSQLiteXML::runNumber, siStripLorentzAngleInput_, cond::timeTypeSpecs, and watchLorentzAngleRcd_.

                                                                                            {
   // no action needed if the LA record didn't change
   if (!(watchLorentzAngleRcd_.check(setup)))
     return;
 
   const auto runNumber = run.run();
   auto firstRun = cond::timeTypeSpecs[cond::runnumber].beginValue;
 
   // avoid infinite loop due to wrap-around of unsigned variable 'i' including
   // arrow from i to zero and a nice smiley ;)
   for (unsigned int i = moduleGroupSelector_->numIovs(); i-- > 0;) {
     const auto firstRunOfIOV = moduleGroupSelector_->firstRunOfIOV(i);
     if (runNumber >= firstRunOfIOV) {
       firstRun = firstRunOfIOV;
       break;
     }
   }
 
   edm::ESHandle<SiStripLorentzAngle> lorentzAngleHandle;
   const auto &lorentzAngleRcd = setup.get<SiStripLorentzAngleRcd>();
   lorentzAngleRcd.get(readoutModeName_, lorentzAngleHandle);
   if (cachedLorentzAngleInputs_.find(firstRun) == cachedLorentzAngleInputs_.end()) {
     cachedLorentzAngleInputs_.emplace(firstRun, SiStripLorentzAngle(*lorentzAngleHandle));
   } else {
     if (lorentzAngleRcd.validityInterval().first().eventID().run() > firstRun &&
         lorentzAngleHandle->getLorentzAngles()                            // only bad if non-identical values
             != cachedLorentzAngleInputs_[firstRun].getLorentzAngles()) {  // (comparing maps)
       // Maps are containers sorted by key, but comparison problems may arise from
       // 'floating point comparison' problems (FIXME?)
       throw cms::Exception("BadInput") << "Trying to cache SiStripLorentzAngle payload for a run (" << runNumber
                                        << ") in an IOV (" << firstRun << ") that was already cached.\n"
                                        << "The following record in your input database tag has an IOV "
                                        << "boundary that does not match your IOV definition:\n"
                                        << " - SiStripLorentzAngleRcd '" << lorentzAngleRcd.key().name() << "' (since "
                                        << lorentzAngleRcd.validityInterval().first().eventID().run() << ")\n";
     }
   }
 
   siStripLorentzAngleInput_ = &(cachedLorentzAngleInputs_[firstRun]);
   currentIOV_ = firstRun;
 }

SiStripLorentzAngle SiStripLorentzAngleCalibration::createFromTree	(	const char *	fileName,
		const char *	treeName
	)		const

private

Definition at line 500 of file SiStripLorentzAngleCalibration.cc.

References DEFINE_EDM_PLUGIN, FrontierConditions_GlobalTag_cff::file, and mps_fire::result.

Referenced by getLorentzAnglesInput().

                                                                                                                    {
   // Check for file existence on your own to work around
   // https://hypernews.cern.ch/HyperNews/CMS/get/swDevelopment/2715.html:
   TFile *file = nullptr;
   FILE *testFile = fopen(fileName, "r");
   if (testFile) {
     fclose(testFile);
     file = TFile::Open(fileName, "READ");
   }  // else not existing, see error below
 
   TTree *tree = nullptr;
   if (file)
     file->GetObject(treeName, tree);
 
   SiStripLorentzAngle result{};
   if (tree) {
     unsigned int id = 0;
     float value = 0.;
     tree->SetBranchAddress("detId", &id);
     tree->SetBranchAddress("value", &value);
 
     const Long64_t nEntries = tree->GetEntries();
     for (Long64_t iEntry = 0; iEntry < nEntries; ++iEntry) {
       tree->GetEntry(iEntry);
       result.putLorentzAngle(id, value);
     }
   } else {  // Warning only since could be parallel job on no events.
     edm::LogWarning("Alignment") << "@SUB=SiStripLorentzAngleCalibration::createFromTree"
                                  << "Could not get TTree '" << treeName << "' from file '" << fileName
                                  << (file ? "'." : "' (file does not exist).");
   }
 
   delete file;  // tree will vanish with file
   return result;
 }

unsigned int SiStripLorentzAngleCalibration::derivatives	(	std::vector< ValuesIndexPair > &	outDerivInds,
		const TransientTrackingRecHit &	hit,
		const TrajectoryStateOnSurface &	tsos,
		const edm::EventSetup &	setup,
		const EventInfo &	eventInfo
	)		const

override

Return non-zero derivatives for x- and y-measurements with their indices by reference. Return value is their number.

Definition at line 208 of file SiStripLorentzAngleCalibration.cc.

References ecalTB2006H4_GenSimDigiReco_cfg::bField, TrackingRecHit::det(), effectiveThickness(), AlignmentAlgorithmBase::EventInfo::eventId(), GeomDet::geographicalId(), edm::EventSetup::get(), MagneticField::inTesla(), kDeconvolutionMode, kPeakMode, hcaltpdigi_cfi::latency, seedCreatorFromRegionConsecutiveHitsEDProducer_cff::magneticField, ALCARECOPromptCalibProdSiPixelAli0T_cff::mode, moduleGroupSelector_, GloballyPositioned< T >::position(), readoutMode_, readoutModeName_, edm::EventID::run(), GeneralSetup::setup(), SiStripLatency::singleReadOutMode(), GeomDet::surface(), and GloballyPositioned< T >::toLocal().

                                                                                            {
   outDerivInds.clear();
 
   edm::ESHandle<SiStripLatency> latency;
   setup.get<SiStripLatencyRcd>().get(latency);
   const int16_t mode = latency->singleReadOutMode();
   if (mode == readoutMode_) {
     if (hit.det()) {  // otherwise 'constraint hit' or whatever
 
       const int index =
           moduleGroupSelector_->getParameterIndexFromDetId(hit.det()->geographicalId(), eventInfo.eventId().run());
       if (index >= 0) {  // otherwise not treated
         edm::ESHandle<MagneticField> magneticField;
         setup.get<IdealMagneticFieldRecord>().get(magneticField);
         const GlobalVector bField(magneticField->inTesla(hit.det()->surface().position()));
         const LocalVector bFieldLocal(hit.det()->surface().toLocal(bField));
         const double dZ = this->effectiveThickness(hit.det(), mode, setup);
         // shift due to LA: dx = tan(LA) * dz/2 = mobility * B_y * dz/2,
         // '-' since we have derivative of the residual r = hit - trk and mu is part of trk model
         //   (see GF's presentation in alignment meeting 25.10.2012,
         //    https://indico.cern.ch/conferenceDisplay.py?confId=174266#2012-10-25)
         // Hmm! StripCPE::fillParams() defines, together with
         //      StripCPE::driftDirection(...):
         //      drift.x = -mobility * by * thickness (full drift from backside)
         //      So '-' already comes from that, not from mobility being part of
         //      track model...
         // GM: sign convention is the same as for pixel LA, i.e. adopt it here, too
         const double xDerivative = bFieldLocal.y() * dZ * -0.5;  // parameter is mobility!
         const double yDerivative = bFieldLocal.x() * dZ * 0.5;   // parameter is mobility!
         if (xDerivative || yDerivative) {                        // If field is zero, this is zero: do not return it
           const Values derivs{xDerivative, yDerivative};
           outDerivInds.push_back(ValuesIndexPair(derivs, index));
         }
       }
     } else {
       edm::LogWarning("Alignment") << "@SUB=SiStripLorentzAngleCalibration::derivatives1"
                                    << "Hit without GeomDet, skip!";
     }
   } else if (mode != kDeconvolutionMode && mode != kPeakMode) {
     // warn only if unknown/mixed mode
     edm::LogWarning("Alignment") << "@SUB=SiStripLorentzAngleCalibration::derivatives2"
                                  << "Readout mode is " << mode << ", but looking for " << readoutMode_ << " ("
                                  << readoutModeName_ << ").";
   }
 
   return outDerivInds.size();
 }

double SiStripLorentzAngleCalibration::effectiveThickness	(	const GeomDet *	det,
		int16_t	mode,
		const edm::EventSetup &	setup
	)		const

private

in non-peak mode the effective thickness is reduced...

Definition at line 390 of file SiStripLorentzAngleCalibration.cc.

References Surface::bounds(), GeomDet::geographicalId(), edm::EventSetup::get(), triggerObjects_cff::id, readoutModeName_, GeomDet::surface(), and Bounds::thickness().

Referenced by derivatives().

                                                                                             {
   if (!det)
     return 0.;
   double dZ = det->surface().bounds().thickness();  // it is a float only...
   const SiStripDetId id(det->geographicalId());
   edm::ESHandle<SiStripBackPlaneCorrection> backPlaneHandle;
   // FIXME: which one? DepRcd->get(handle) or Rcd->get(readoutModeName_, handle)??
   // setup.get<SiStripBackPlaneCorrectionDepRcd>().get(backPlaneHandle); // get correct mode
   setup.get<SiStripBackPlaneCorrectionRcd>().get(readoutModeName_, backPlaneHandle);
   const double bpCor = backPlaneHandle->getBackPlaneCorrection(id);  // it's a float...
   //  std::cout << "bpCor " << bpCor << " in subdet " << id.subdetId() << std::endl;
   dZ *= (1. - bpCor);
 
   return dZ;
 }

void SiStripLorentzAngleCalibration::endOfJob ( )

overridevirtual

Called at end of a the job of the AlignmentProducer. Write out determined parameters.

Implements IntegratedCalibrationBase.

Definition at line 316 of file SiStripLorentzAngleCalibration.cc.

References EnergyCorrector::c, getLorentzAnglesInput(), getParameterError(), getParameterForDetId(), haddnano::inputs, edm::Service< T >::isAvailable(), moduleGroupSelector_, IntegratedCalibrationBase::name(), MillePedeFileConverter_cfg::out, convertSQLitetoXML_cfg::output, parameters_, paramUncertainties_, readoutModeName_, recordNameDBwrite_, saveToDB_, AlCaHLTBitMon_QueryRunRegistry::string, cond::service::PoolDBOutputService::writeOne(), and writeTree().

                                               {
   // loginfo output
   std::ostringstream out;
   out << "Parameter results for readout mode '" << readoutModeName_ << "'\n";
   for (unsigned int iPar = 0; iPar < parameters_.size(); ++iPar) {
     out << iPar << ": " << parameters_[iPar] << " +- " << paramUncertainties_[iPar] << "\n";
   }
   edm::LogInfo("Alignment") << "@SUB=SiStripLorentzAngleCalibration::endOfJob" << out.str();
 
   std::map<unsigned int, TreeStruct> treeInfo;  // map of TreeStruct for each detId
 
   // now write 'input' tree
   const std::string treeName{this->name() + '_' + readoutModeName_ + '_'};
   std::vector<const SiStripLorentzAngle *> inputs{};
   inputs.reserve(moduleGroupSelector_->numIovs());
   for (unsigned int iIOV = 0; iIOV < moduleGroupSelector_->numIovs(); ++iIOV) {
     const auto firstRunOfIOV = moduleGroupSelector_->firstRunOfIOV(iIOV);
     inputs.push_back(this->getLorentzAnglesInput(firstRunOfIOV));  // never NULL
     this->writeTree(inputs.back(),
                     treeInfo,
                     (treeName + "input_" + std::to_string(firstRunOfIOV)).c_str());  // empty treeInfo for input...
 
     if (inputs.back()->getLorentzAngles().empty()) {
       edm::LogError("Alignment") << "@SUB=SiStripLorentzAngleCalibration::endOfJob"
                                  << "Input Lorentz angle map is empty ('" << readoutModeName_
                                  << "' mode), skip writing output!";
       return;
     }
   }
 
   const unsigned int nonZeroParamsOrErrors =  // Any determined value?
       count_if(parameters_.begin(), parameters_.end(), [](auto c) { return c != 0.; }) +
       count_if(paramUncertainties_.begin(), paramUncertainties_.end(), [](auto c) { return c != 0.; });
 
   for (unsigned int iIOV = 0; iIOV < moduleGroupSelector_->numIovs(); ++iIOV) {
     auto firstRunOfIOV = static_cast<cond::Time_t>(moduleGroupSelector_->firstRunOfIOV(iIOV));
     SiStripLorentzAngle output{};
     // Loop on map of values from input and add (possible) parameter results
     for (const auto &iterIdValue : inputs[iIOV]->getLorentzAngles()) {
       // type of 'iterIdValue' is pair<unsigned int, float>
       const auto detId = iterIdValue.first;  // key of map is DetId
       // Some code one could use to miscalibrate wrt input:
       // double param = 0.;
       // const DetId id(detId);
       // if (id.subdetId() == 3) { // TIB
       //   param = (readoutMode_ == kPeakMode ? -0.003 : -0.002);
       // } else if (id.subdetId() == 5) { // TOB
       //   param = (readoutMode_ == kPeakMode ? 0.005 : 0.004);
       // }
       const double param = this->getParameterForDetId(detId, firstRunOfIOV);
       // put result in output, i.e. sum of input and determined parameter:
       auto value = iterIdValue.second + static_cast<float>(param);
       output.putLorentzAngle(detId, value);
       const int paramIndex = moduleGroupSelector_->getParameterIndexFromDetId(detId, firstRunOfIOV);
       treeInfo[detId] = TreeStruct(param, this->getParameterError(paramIndex), paramIndex);
     }
 
     if (saveToDB_ || nonZeroParamsOrErrors != 0) {  // Skip writing mille jobs...
       this->writeTree(&output, treeInfo, (treeName + Form("result_%lld", firstRunOfIOV)).c_str());
     }
 
     if (saveToDB_) {  // If requested, write out to DB
       edm::Service<cond::service::PoolDBOutputService> dbService;
       if (dbService.isAvailable()) {
         dbService->writeOne(&output, firstRunOfIOV, recordNameDBwrite_);
       } else {
         edm::LogError("BadConfig") << "@SUB=SiStripLorentzAngleCalibration::endOfJob"
                                    << "No PoolDBOutputService available, but saveToDB true!";
       }
     }
   }  // end loop on IOVs
 }

const SiStripLorentzAngle * SiStripLorentzAngleCalibration::getLorentzAnglesInput ( const align::RunNumber & run = 0 )

private

Input LorentzAngle values:

either from EventSetup of first call to derivatives(..)
or created from files of passed by configuration (i.e. from parallel processing)

Definition at line 409 of file SiStripLorentzAngleCalibration.cc.

References cachedLorentzAngleInputs_, createFromTree(), currentIOV_, SiStripLorentzAngle::getLorentzAngles(), mergeFileNames_, IntegratedCalibrationBase::name(), readoutModeName_, siStripLorentzAngleInput_, and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by endOfJob().

                                                                                                           {
   const auto &resolvedRun = run > 0 ? run : currentIOV_;
   // For parallel processing in Millepede II, create SiStripLorentzAngle
   // from info stored in files of parallel jobs and check that they are identical.
   // If this job has run on events, still check that LA is identical to the ones
   // from mergeFileNames_.
   const std::string treeName{this->name() + "_" + readoutModeName_ + "_input_" + std::to_string(resolvedRun)};
   for (const auto &iFile : mergeFileNames_) {
     auto la = this->createFromTree(iFile.c_str(), treeName.c_str());
     // siStripLorentzAngleInput_ could be non-null from previous file of this loop
     // or from checkLorentzAngleInput(..) when running on data in this job as well
     if (!siStripLorentzAngleInput_ || siStripLorentzAngleInput_->getLorentzAngles().empty()) {
       cachedLorentzAngleInputs_[resolvedRun] = la;
       siStripLorentzAngleInput_ = &(cachedLorentzAngleInputs_[resolvedRun]);
       currentIOV_ = resolvedRun;
     } else {
       // FIXME: about comparison of maps see comments in checkLorentzAngleInput
       if (!la.getLorentzAngles().empty() &&  // single job might not have got events
           la.getLorentzAngles() != siStripLorentzAngleInput_->getLorentzAngles()) {
         // Throw exception instead of error?
         edm::LogError("NoInput") << "@SUB=SiStripLorentzAngleCalibration::getLorentzAnglesInput"
                                  << "Different input values from tree " << treeName << " in file " << iFile << ".";
       }
     }
   }
 
   if (!siStripLorentzAngleInput_) {  // no files nor ran on events
     // [] operator default-constructs an empty SiStripLorentzAngle object in place:
     siStripLorentzAngleInput_ = &(cachedLorentzAngleInputs_[resolvedRun]);
     currentIOV_ = resolvedRun;
     edm::LogError("NoInput") << "@SUB=SiStripLorentzAngleCalibration::getLorentzAnglesInput"
                              << "No input, create an empty one ('" << readoutModeName_ << "' mode)!";
   } else if (siStripLorentzAngleInput_->getLorentzAngles().empty()) {
     edm::LogError("NoInput") << "@SUB=SiStripLorentzAngleCalibration::getLorentzAnglesInput"
                              << "Empty result ('" << readoutModeName_ << "' mode)!";
   }
 
   return siStripLorentzAngleInput_;
 }

double SiStripLorentzAngleCalibration::getParameter ( unsigned int index ) const

overridevirtual

Return current value of parameter identified by index. Returns 0. if index out-of-bounds.

Implements IntegratedCalibrationBase.

Definition at line 281 of file SiStripLorentzAngleCalibration.cc.

References parameters_.

Referenced by Mixins._Parameterizable::hasParameter().

                                                                             {
   return (index >= parameters_.size() ? 0. : parameters_[index]);
 }

double SiStripLorentzAngleCalibration::getParameterError ( unsigned int index ) const

overridevirtual

Return current value of parameter identified by index. Returns 0. if index out-of-bounds or if errors undetermined.

Implements IntegratedCalibrationBase.

Definition at line 286 of file SiStripLorentzAngleCalibration.cc.

References paramUncertainties_.

Referenced by endOfJob().

                                                                                  {
   return (index >= paramUncertainties_.size() ? 0. : paramUncertainties_[index]);
 }

double SiStripLorentzAngleCalibration::getParameterForDetId	(	unsigned int	detId,
		edm::RunNumber_t	run
	)		const

private

Determined parameter value for this detId (detId not treated => 0.) and the given run.

Definition at line 450 of file SiStripLorentzAngleCalibration.cc.

References moduleGroupSelector_, and parameters_.

Referenced by endOfJob().

                                                                                                         {
   const int index = moduleGroupSelector_->getParameterIndexFromDetId(detId, run);
 
   return (index < 0 ? 0. : parameters_[index]);
 }

unsigned int SiStripLorentzAngleCalibration::numParameters ( ) const

overridevirtual

How many parameters does this calibration define?

Implements IntegratedCalibrationBase.

Definition at line 162 of file SiStripLorentzAngleCalibration.cc.

References parameters_.

Referenced by beginOfJob().

162 { return parameters_.size(); }

SiStripLorentzAngleCalibration::parameters_

std::vector< double > parameters_

Definition: SiStripLorentzAngleCalibration.cc:128

bool SiStripLorentzAngleCalibration::setParameter	(	unsigned int	index,
		double	value
	)

overridevirtual

Setting the determined parameter identified by index, returns false if out-of-bounds, true otherwise.

Implements IntegratedCalibrationBase.

Definition at line 261 of file SiStripLorentzAngleCalibration.cc.

References parameters_, and relativeConstraints::value.

Referenced by editorTools.UserCodeTool::__call__(), HiCoreTools.RestrictInputToAOD::__call__(), coreTools.RunOnData::__call__(), trackTools.MakeAODTrackCandidates::__call__(), runJetUncertainties.RunJetUncertainties::__call__(), metTools.AddMETCollection::__call__(), editorTools.ChangeSource::__call__(), HiCoreTools.RemoveMCMatching::__call__(), cmsswVersionTools.PickRelValInputFiles::__call__(), coreTools.RemoveMCMatching::__call__(), trackTools.MakePATTrackCandidates::__call__(), trigTools.SwitchOnTrigger::__call__(), runMETCorrectionsAndUncertainties.RunMETCorrectionsAndUncertainties::__call__(), HiCoreTools.RemoveAllPATObjectsBut::__call__(), HiCoreTools.RemoveSpecificPATObjects::__call__(), trigTools.SwitchOnTriggerStandAlone::__call__(), trackTools.MakeTrackCandidates::__call__(), tauTools.AddTauCollection::__call__(), trigTools.SwitchOnTriggerMatching::__call__(), HiCoreTools.RemoveCleaning::__call__(), HiCoreTools.AddCleaning::__call__(), trigTools.SwitchOnTriggerMatchingStandAlone::__call__(), trigTools.SwitchOnTriggerMatchEmbedding::__call__(), jetTools.AddJetCollection::__call__(), jetTools.SwitchJetCollection::__call__(), jetTools.UpdateJetCollection::__call__(), jetTools.AddJetID::__call__(), jetTools.SetTagInfos::__call__(), and runMETCorrectionsAndUncertainties.RunMETCorrectionsAndUncertainties::jetConfiguration().

                                                                                   {
   if (index >= parameters_.size()) {
     return false;
   } else {
     parameters_[index] = value;
     return true;
   }
 }

bool SiStripLorentzAngleCalibration::setParameterError	(	unsigned int	index,
		double	error
	)

overridevirtual

Setting the determined parameter uncertainty identified by index, returns false if out-of-bounds, true otherwise.

Implements IntegratedCalibrationBase.

Definition at line 271 of file SiStripLorentzAngleCalibration.cc.

References relativeConstraints::error, and paramUncertainties_.

                                                                                        {
   if (index >= paramUncertainties_.size()) {
     return false;
   } else {
     paramUncertainties_[index] = error;
     return true;
   }
 }

void SiStripLorentzAngleCalibration::writeTree	(	const SiStripLorentzAngle *	lorentzAngle,
		const std::map< unsigned int, TreeStruct > &	treeInfo,
		const char *	treeName
	)		const

private

Definition at line 457 of file SiStripLorentzAngleCalibration.cc.

References FrontierConditions_GlobalTag_cff::file, SiStripLorentzAngle::getLorentzAngles(), TreeStruct::LeafList(), moduleGroupSelector_, and outFileName_.

Referenced by endOfJob().

                                                                            {
   if (!lorentzAngle)
     return;
 
   TFile *file = TFile::Open(outFileName_.c_str(), "UPDATE");
   if (!file) {
     edm::LogError("BadConfig") << "@SUB=SiStripLorentzAngleCalibration::writeTree"
                                << "Could not open file '" << outFileName_ << "'.";
     return;
   }
 
   TTree *tree = new TTree(treeName, treeName);
   unsigned int id = 0;
   float value = 0.;
   TreeStruct treeStruct;
   tree->Branch("detId", &id, "detId/i");
   tree->Branch("value", &value, "value/F");
   tree->Branch("treeStruct", &treeStruct, TreeStruct::LeafList());
 
   for (auto iterIdValue = lorentzAngle->getLorentzAngles().begin();
        iterIdValue != lorentzAngle->getLorentzAngles().end();
        ++iterIdValue) {
     // type of (*iterIdValue) is pair<unsigned int, float>
     id = iterIdValue->first;  // key of map is DetId
     value = iterIdValue->second;
     // type of (*treeStructIter) is pair<unsigned int, TreeStruct>
     auto treeStructIter = treeInfo.find(id);  // find info for this id
     if (treeStructIter != treeInfo.end()) {
       treeStruct = treeStructIter->second;  // info from input map
     } else {                                // if none found, fill at least parameter index (using 1st IOV...)
       const cond::Time_t run1of1stIov = moduleGroupSelector_->firstRunOfIOV(0);
       const int ind = moduleGroupSelector_->getParameterIndexFromDetId(id, run1of1stIov);
       treeStruct = TreeStruct(ind);
     }
     tree->Fill();
   }
   tree->Write();
   delete file;  // tree vanishes with the file...
 }