Functions
def	checkSteps (steps)

def	determineNewProfile (step, Profile, SavedProfile)

def	expandHyphens (step)

def	getFstOccur (item, list)

def	getLstIndex (item, list)

def	getProfileArray (ProfileCode)

def	getSteps (userSteps)

def	init_vars ()

def	main (argv=sys.argv)

def	optionparse ()

def	pythonFragment (step, cmsdriverOptions)

def	setInputFile (steps, step, acandle, stepIndex, pileup=False, bypasshlt=False)

def	setOutputFileOption (acandle, endstep)

def	setupProgramParameters (options, args)

def	writeCommands (simcandles, Profile, acandle, steps, NumberOfEvents, cmsDriverOptions, bypasshlt, stepIndex=0, pileup=False, userInputFile="")

def	writeCommandsToReport (simcandles, Candle, Profile, debug, NumberOfEvents, cmsDriverOptions, steps, bypasshlt, userInputFile)

def	writePrerequisteSteps (simcandles, steps, acandle, NumberOfEvents, cmsDriverOptions, pileup, bypasshlt)

def	writeReportFileHeader (CMSSW_VERSION, CMSSW_RELEASE_BASE, CMSSW_BASE)

def	writeStepHead (simcandles, acandle, step)

def	writeUnprofiledSteps (simcandles, CustomisePythonFragment, cmsDriverOptions, unprofiledSteps, previousOutputFile, acandle, NumberOfEvents, stepIndex, pileup, bypasshlt)

Variables
	AfterPileUpSteps

	AllSteps

	cmsDriver

	debug

	DEF_STEPS

	hypreg

	Profiler

	THIS_PROG_NAME
	Global variables. More...

Function Documentation

def cmsRelvalreportInput.checkSteps ( steps )

Checks user steps <steps> for order against steps defined in AllSteps list.
If they are not, prints a warning and exits.
No return value.

Definition at line 78 of file cmsRelvalreportInput.py.

References edm.print(), and split.

Referenced by getSteps().

 def checkSteps(steps):
     '''Checks user steps <steps> for order against steps defined in AllSteps list.
     If they are not, prints a warning and exits.
     No return value.'''
     
     #print steps
     #if ":" in steps:
     #    steps.split(
     idx = -2
     lstidx = -2
     for step in steps:
         astep = step
         split = []
         #Added special workflow for GEN-FASTSIM, bypass the check of step order:
         if step=="GEN,FASTSIM":
             pass
         else:
             if "-" in step:
                 split = astep.split("-")
                 astep = split[0].split(":")[0]
              #   print "This is astep:%s"%astep
             #idx =AllSteps.index("GEN,SIM")
             #print idx
             #print astep
             idx = AllSteps.index(astep.split(":")[0])            
             if not ( idx == -2 ):
                 if lstidx > idx:
                     print("ERROR: Your user defined steps are not in a valid order")
                     sys.exit()
                 lstidx = idx    
             if "-" in step:
                 lstidx = AllSteps.index(split[1].split(":")[0])
 
 

def cmsRelvalreportInput.determineNewProfile	(	step,
		Profile,
		SavedProfile
	)

Definition at line 431 of file cmsRelvalreportInput.py.

 def determineNewProfile(step,Profile,SavedProfile):
     if 'DIGI2RAW' in step:
         SavedProfile = Profile
         Profile = [ ]
     if 'HLT' in step:
         Profile = SavedProfile
 
     return (Profile, SavedProfile)
 

def cmsRelvalreportInput.expandHyphens ( step )

Definition at line 263 of file cmsRelvalreportInput.py.

References ALCARECOTkAlBeamHalo_cff.filter, genParticles_cff.map, edm.print(), and split.

Referenced by writeCommands().

 def expandHyphens(step):
     newsteps = []
 #    for step in steps:
     if "-" in step:
         hypsteps = step.split(r"-")
         #if not (len(hypsteps) == 2):
         #    print "ERROR: Could not parse usersteps. You have too many hypens between commas"
         #    sys.exit()
         #el
         if not reduce(lambda x,y,: x and y,map(lambda x: x.split(":")[0] in AllSteps, hypsteps)):
         #(hypsteps[0].split(":")[0] in AllSteps and hypsteps[1].split(":") in AllSteps):
             print("ERROR: One of the steps you defined is invalid")
             sys.exit()
         else:
             if (hypsteps[0] == hypsteps[1]):
                 print("WARNING: You should not add a hypenated step that as the same source and destination step, ignoring")
                 newsteps.append(hypsteps[0])
             else:
                 newsteps.append(hypsteps[0])
                 
                 srt = AllSteps.index(hypsteps[0].split(":")[0]) + 1
                 for n in range(srt,AllSteps.index(hypsteps[-1].split(":")[0])):
                     astep = AllSteps[n]
                     if astep in ( hypsteps[i].split(":")[0] for i in range(1,len(hypsteps))):
                         #break
                         astep=filter(lambda x: astep == x.split(":")[0],hypsteps)[0]
                         if astep==hypsteps[-1].split(":")[0]:
                             break
                     newsteps.append(astep)
                 newsteps.append(hypsteps[-1])
     else:
         if not (step.split(":")[0] in AllSteps):
             print("ERROR: One of the steps you defined is invalid")
             sys.exit()
         else:
             newsteps.append(step)
 
     return newsteps
 

def cmsRelvalreportInput.getFstOccur	(	item,
		list
	)

Definition at line 69 of file cmsRelvalreportInput.py.

References ALCARECOTkAlBeamHalo_cff.filter.

 def getFstOccur(item, list):
     return filter(item.__eq__,list)[0]
 

def cmsRelvalreportInput.getLstIndex	(	item,
		list
	)

Definition at line 72 of file cmsRelvalreportInput.py.

 def getLstIndex(item, list):
     lenlist = len(list)
     for x in range(lenlist - 1,0,-1):
         if list[x] == item:
             return x
 

def cmsRelvalreportInput.getProfileArray ( ProfileCode )

Definition at line 379 of file cmsRelvalreportInput.py.

References str.

Referenced by main().

 def getProfileArray(ProfileCode):
 
     Profile = []
 
     # The allowed profiles are:
 
     AllowedProfile = [
         'TimingReport',
         'TimeReport',
         'SimpleMemReport',
         'EdmSize',
         'IgProfperf',
         'IgProfMemTotal',
         'IgProfMemLive',
         #'IgProfMemMax', #Should add this here... but instead of changing the profile code numbers (really should, using options instead of numbers...) I am hacking the IgProfMemLive one: when this one is selected I will also include the IgProfMemMax profile (and analysis is analyse is there)
         'IgProfMemAnalyse',
         'valgrind',
         'memcheck_valgrind',
         'None',
         ]
 
     if _noprof:
         Profile.append(AllowedProfile[-1])
     else:
         #FIXME:
         #Horrible code!
         for i in range(10):
             if str(i) in ProfileCode:
                 firstCase = (i == 0 and (str(1) in ProfileCode or str(2) in ProfileCode)) \
                             or (i == 1 and str(2) in ProfileCode)
                 secCase   = (i==4 and str(7) in ProfileCode) \
                             or (i == 5 and (str(6) in ProfileCode or str(7) in ProfileCode)) \
                             or (i == 6 and str(7) in ProfileCode)
                 
                 if firstCase or secCase:
                     Profile.append(AllowedProfile[i] + ' @@@ reuse')
                     #Here's the hack:
                     if i==6: #i.e. IgProfMemLive
                         Profile.append("IgProfMemMax @@@ reuse")
                 else:
                     Profile.append(AllowedProfile[i])
                     if i==6: #i.e. IgProfMemLive
                         Profile.append("IgProfMemMax")
 
     return Profile
 

def cmsRelvalreportInput.getSteps ( userSteps )

Analyzes the steps in <userSteps> to translate the cmsRelvalreportInput.py --step option into the cmsDriver.py one. Expanding hyphens for combined steps.
Handle the exceptional cases of GEN-, GEN-SIM and GEN-FASTSIM (GEN is never profiled by itself).
Returns a list of steps <steps>.

Definition at line 112 of file cmsRelvalreportInput.py.

References checkSteps().

Referenced by setupProgramParameters().

 def getSteps(userSteps):
     '''Analyzes the steps in <userSteps> to translate the cmsRelvalreportInput.py --step option into the cmsDriver.py one. Expanding hyphens for combined steps.
     Handle the exceptional cases of GEN-, GEN-SIM and GEN-FASTSIM (GEN is never profiled by itself).
     Returns a list of steps <steps>.'''
     #Add handling of ":" in steps
     #print userSteps
     # Then split the user steps into "steps"
     gsreg = re.compile('GEN-SIM')
     greg = re.compile('GEN') #Add a second hack (due to the first) to handle the step 1 case GEN-HLT
     gfsreg = re.compile('GEN-FASTSIM') #Add a third hack to handle the case GEN-FASTSIM workflow
     StepsTokens = userSteps.split(",")
     steps = [] 
     for astep in StepsTokens:
 
         # Then transform the combined steps (GEN-SIM, RAW2DIGI-RECO)
         # from using the "-" to using the "," to match cmsDriver.py convention
 
         if gsreg.search(astep):
             astep = gsreg.sub(r"GEN,SIM", astep)
         elif gfsreg.search(astep):
             astep = gfsreg.sub(r"GEN,FASTSIM", astep) #could add protection for user screw-ups
         elif greg.search(astep):
             astep = greg.sub(r"GEN,SIM", astep)
             
             
         #print astep
         # Finally collect all the steps into the steps list:
 
         steps.append(astep)
     
     #steps = expandHypens(steps)
     checkSteps(steps)
     return steps
         

def cmsRelvalreportInput.init_vars ( )

Definition at line 343 of file cmsRelvalreportInput.py.

References edm.print().

Referenced by main().

 def init_vars():
 
     ####################
     # Obtain required environment variables
     #
 
     try:
         CMSSW_BASE         = os.environ['CMSSW_BASE']
         CMSSW_RELEASE_BASE = os.environ['CMSSW_RELEASE_BASE']
         CMSSW_VERSION      = os.environ['CMSSW_VERSION']
     except KeyError:
         print('Error: An environment variable either CMSSW_{BASE, RELEASE_BASE or VERSION} is not available.')
         print('       Please run eval `scramv1 runtime -csh` to set your environment variables')
         sys.exit()
 
     return ( CMSSW_BASE,
              CMSSW_RELEASE_BASE,
              CMSSW_VERSION)
 

def cmsRelvalreportInput.main ( argv = sys.argv )

Definition at line 949 of file cmsRelvalreportInput.py.

References getProfileArray(), init_vars(), optionparse(), edm.print(), setupProgramParameters(), writeCommandsToReport(), and writeReportFileHeader().

 def main(argv=sys.argv):
 
     #####################
     # Options Parser 
     #
 
     (options, args) = optionparse()
 
     #####################
     # Set up arguments and option handling
     #
 
     (NumberOfEvents, ProfileCode, cmsDriverOptions, steps, Candle, bypasshlt, userInputFile ) = setupProgramParameters(options,args)
     #print setupProgramParameters(options,args)
 
     ######################
     # Initialize a few variables
     #
 
     (CMSSW_BASE, CMSSW_RELEASE_BASE, CMSSW_VERSION ) = init_vars()
 
     ##################
     # Ok everything is ready now we need to create the input file for the relvalreport script 
     #
 
     simcandles = writeReportFileHeader(CMSSW_VERSION,CMSSW_RELEASE_BASE,CMSSW_BASE)
 
     ##################
     # Based on the profile code create the array of profiles to run:
     #
 
     Profile = getProfileArray(ProfileCode)
 
 
     ##################
     # Write the commands for the report to the file
     #
 
     writeCommandsToReport(simcandles,Candle,Profile,debug,NumberOfEvents,cmsDriverOptions,steps,bypasshlt,userInputFile)
 
     print("Written out cmsRelvalreport.py input file at:\n%s"%os.path.abspath('./'+simcandles.name))
                 
     simcandles.close()
 

def cmsRelvalreportInput.optionparse ( )

Definition at line 146 of file cmsRelvalreportInput.py.

References genParticles_cff.map.

Referenced by main().

 def optionparse():
     global _noprof
     explanations = map(lambda x: "          " + x, Candles)
     explanation  = ""
     for x in range(len(explanations)):
         explanation += "%-*s %s\n" % (30, explanations[x],CandDesc[x])
     parser = opt.OptionParser(usage=("""%s NUM_EVENTS_PER_CFG CANDLES PROFILE [--cmsdriver=cmsDriverOptions] [--usersteps=processingStepsOption]
 
     Description - This program creates a configuration file for cmsRelvalreport.py that describes the order in which cmsDriver.py should be run with which candles, steps and profiling so that time spent running cmsDriver.py is minimised. Without this correct ordering we would have to re-run parts of the profiling steps.
 
     Arguments:
         NUM_EVENTS_PER_CFG - The number of events per config file
 
         CANDLES - The simulation type to perform profiling on
           Candles              Description
           AllCandles           Run all of the candles below
 %s
 
         PROFILE - the type of profiling to perform (multiple codes can be used):
           Code  Profile Type
           0     TimingReport
           1     TimeReport
           2     SimpleMemoryCheck
           3     EdmSize
           4     IgProfPerf
           5     IgProfMemTotal
           6     IgProfMemLive
           7     IgProfAnalyse
           8     ValgrindFCE
           9     ValgrindMemCheck    
 
     Examples (could be obsolete!):  
        Perform Timing Report profiling for all candles, all steps and 10 events per cfg.
         ./%s 10 AllCandles 1 \"--conditions FakeConditions --eventcontent FEVTDEBUGHLT\"
        Perform Timing Report, Time Report and SimpleMemoryCheck profiling for HiggsZZ4LM200, all steps and 50 events.
         ./%s 50 \"HiggsZZ4LM200\" 012 \"--conditions FakeConditions --eventcontent FEVTDEBUGHLT\"
        Perform IgProfPerf and IgProfMemTotal profiling for TTbar, all steps and 100 events.
         ./%s 100 \"TTbar\" 45 --cmsdriver=\"--conditions FakeConditions --eventcontent RAWRECO\"
        Perform ValgrindFCE ValgrindMemCheck profiling for Minimum bias and 100 events. Only on GEN,SIM and DIGI steps.
         ./%s 100 \"MinBias\" 89 --cmsdriver=\"--conditions FakeConditions --eventcontent RAWSIM\" \"--usersteps=GEN-SIM,DIGI"""
       % ( THIS_PROG_NAME, explanation, THIS_PROG_NAME,THIS_PROG_NAME,THIS_PROG_NAME,THIS_PROG_NAME)))
     
     devel  = opt.OptionGroup(parser, "Developer Options",
                                      "Caution: use these options at your own risk."
                                      "It is believed that some of them bite.\n")
     #parser.set_defaults(debug=False)
 
     parser.add_option(
         '-b',
         '--bypass-hlt',
         action="store_true",
         dest='bypasshlt',
         default=False,
         help='Should we bypass using the HLT root file?'
         )
 
     parser.add_option(
         '-u',
         '--usersteps',
         type='string',
         dest='userSteps',
         help='Which steps to run',
         metavar='<STEPS>',
         )
     parser.add_option(
         '-c',
         '--cmsdriver',
         type='string',
         dest='cmsDriverOptions',
         help='Option for cmsDriver.py can be specified as a string to be added to all cmsDriver.py commands',
         metavar='<CONDITION>',
         )
     parser.add_option(
         '-i',
         '--filein',
         type='string',
         dest='userInputFile',
         help='Eventual input file (for now to be only used with HLT and RAW2DIGI-RECO workflows)',
         default='',
         metavar='<INPUTFILE>',
         )
     devel.add_option(
         '-1',
         '--no-profile',
         action="store_true",
         dest='noprof',
         help='Do not perform profiling, ever',
         #metavar='DEBUG',
         )
     
     devel.add_option(
         '-d',
         '--debug',
         action="store_true",
         dest='debug',
         help='Show debug output',
         #metavar='DEBUG',
         )
 
     parser.set_defaults(debug=False,noprof=False)
     parser.add_option_group(devel)
 
     (options, args) = parser.parse_args()
     
 
     _noprof = options.noprof
     debug = options.debug
     numofargs = len(args) 
 #    print "runtime cmsinput " + str(numofargs) + " noprof "  + str(_noprof)
     if ((not numofargs == 3) and (not _noprof)) or (_noprof and not (numofargs == 2)):
         parser.error("There are not enough arguments specified to run this program."
                      " Please determine the correct arguments from the usage information above."
                      " Run with --help option for more information.")
         sys.exit()
 
     return (options, args)
 

def cmsRelvalreportInput.pythonFragment	(	step,
		cmsdriverOptions
	)

Definition at line 440 of file cmsRelvalreportInput.py.

Referenced by writeCommands(), and writePrerequisteSteps().

 def pythonFragment(step,cmsdriverOptions):
     # Convenient CustomiseFragment dictionary to map the correct customise Python fragment for cmsDriver.py:
     #It is now living in cmsPerfCommons.py!
     
     if "--pileup" in cmsdriverOptions and not (step == "HLT" or step.startswith("RAW2DIGI")):
         return CustomiseFragment['DIGI-PILEUP']
     elif step in CustomiseFragment:
         return CustomiseFragment[step] 
     else:
         #This is a safe default in any case,
         #the maintenance of the customise python fragments goes into cmsPerfCommons.py
         return CustomiseFragment['DIGI']
 
 

def cmsRelvalreportInput.setInputFile	(	steps,
		step,
		acandle,
		stepIndex,
		pileup = `False`,
		bypasshlt = `False`
	)

Definition at line 454 of file cmsRelvalreportInput.py.

Referenced by writeCommands(), and writeUnprofiledSteps().

 def setInputFile(steps,step,acandle,stepIndex,pileup=False,bypasshlt=False):
     #print "StepIndex 2:%s"%stepIndex
     InputFileOption = ""
     if pileup and stepIndex == 0:
         InputFileOption = "--filein file:%s_%s" % ( FileName[acandle],"DIGI" )
     else:
         InputFileOption = "--filein file:%s_%s" % ( FileName[acandle],steps[stepIndex - 1] )
         
     if pileup:
         pass
     else :
         if 'GEN,SIM' in step:  # there is no input file for GEN,SIM!
             InputFileOption = ''
         if 'GEN,FASTSIM' in step: # there is no input file for GEN,FASTSIM!
             InputFileOption = ''
         elif   'HLT' in steps[stepIndex - 1] and bypasshlt:
 
             # Special hand skipping of HLT since it is not stable enough, so it will not prevent
             # RAW2DIGI,RECO from running
 
             InputFileOption = "--filein file:%s_%s"  % ( FileName[acandle],steps[stepIndex - 2] )
 
     if not InputFileOption == "" :
         InputFileOption += ".root "
 
     return InputFileOption
 

def cmsRelvalreportInput.setOutputFileOption	(	acandle,
		endstep
	)

Definition at line 541 of file cmsRelvalreportInput.py.

References writeCommands().

Referenced by writeCommands().

 def setOutputFileOption(acandle,endstep):
     return "%s_%s.root" % ( FileName[acandle],endstep)
 

def cmsRelvalreportInput.setupProgramParameters	(	options,
		args
	)

Definition at line 302 of file cmsRelvalreportInput.py.

References getSteps(), createfilelist.int, edm.print(), and str.

Referenced by main().

 def setupProgramParameters(options,args):
     steps = []
     cmsDriverOptions = ""
     global AfterPileUpSteps
     NumberOfEvents = int(args[0])  # first arg
     WhichCandles   = str(args[1])  # second arg
     ProfileCode = ""
     if not _noprof:
         ProfileCode    = str(args[2])  # third arg
 
     if options.cmsDriverOptions:
 
         cmsDriverOptions = options.cmsDriverOptions
         print('Using user-specified cmsDriver.py options: ' + cmsDriverOptions)
 
     if options.userSteps:
 
         userSteps = options.userSteps
         steps = getSteps(userSteps)
 
     if WhichCandles.lower() == 'allcandles':
         Candle = Candles
         print('ALL standard simulation candles will be PROCESSED:')
     else:
         Candle = [WhichCandles]
         print('Candle %s will be PROCESSED' % Candle[0])
 
     # For now the two steps are built in, this can be added as an argument later
     # Added the argument option so now this will only be defined if it was not defined already:
 
     if not steps:
         print('The default steps will be run:')
         steps = DEF_STEPS
     else:
         print("You defined your own steps to run:")
 
     for astep in steps:
         print(astep)
 
     return (NumberOfEvents, ProfileCode, cmsDriverOptions, steps, Candle, options.bypasshlt,options.userInputFile)
 

def cmsRelvalreportInput.writeCommands	(	simcandles,
		Profile,
		acandle,
		steps,
		NumberOfEvents,
		cmsDriverOptions,
		bypasshlt,
		stepIndex = `0`,
		pileup = `False`,
		userInputFile = `""`
	)

Definition at line 553 of file cmsRelvalreportInput.py.

References expandHyphens(), ALCARECOTkAlBeamHalo_cff.filter, join(), genParticles_cff.map, edm.print(), pythonFragment(), setInputFile(), setOutputFileOption(), split, writePrerequisteSteps(), writeStepHead(), and writeUnprofiledSteps().

Referenced by setOutputFileOption(), and writeCommandsToReport().

                   userInputFile=""):
     #print "a:%s,b:%s,c:%s"%(stepIndex,pileup,userInputFile)
     OutputStep = ""
 
     stopIndex = len(steps)
     start = 0
 
     userSteps = steps
     SavedProfile = []
     fstROOTfile = True
     fstROOTfileStr = ""
 
     #Handling the case of the first user step not being the first step (GEN,SIM):
     #print "Steps passed to writeCommands %s",steps
     #Special case for FASTSIM:
     if (steps[0] == "GEN,FASTSIM"):
         start=-1
         stopIndex=1
         steps = ["GEN,FASTSIM"]
     else:
         if not (steps[0] == AllSteps[0]) and (steps[0].split("-")[0] != "GEN,SIM"):
             #print "userInputFile: %s"%userInputFile
             if ("--pileup" in cmsDriverOptions) and (steps[0]=="HLT" or steps[0].startswith("RAW2DIGI")) :
                 userInputFile = "../INPUT_PILEUP_EVENTS.root"
                 stepIndex=AllSteps.index(steps[0].split("-")[0].split(":")[0])
                 rootFileStr=""
                 
             elif userInputFile == "":
                 #Write the necessary line to run without profiling all the steps before the wanted ones in one shot:
                 (stepIndex, rootFileStr) = writePrerequisteSteps(simcandles,steps,acandle,NumberOfEvents,cmsDriverOptions,pileup,bypasshlt)
             else: #To be implemented if we want to have input file capability beyond the HLT and RAW2DIGI-RECO workflows
                 #if "-" in steps[0]:
                 stepIndex=AllSteps.index(steps[0].split("-")[0].split(":")[0])
                     #print "Here!"
                 #else:
                     #print "There!"
                 #    stepIndex=AllSteps.index(steps[0])
                 rootFileStr=""
             #Now take care of setting the indeces and input root file name right for the profiling part...
             if fstROOTfile:
                 fstROOTfileStr = rootFileStr
                 fstROOTfile = False
             start = -1
             #if "-" in steps[0]:
             start = AllSteps.index(steps[0].split("-")[0].split(":")[0])
             #else:
             #    start = AllSteps.index(steps[0])
             lst = - 1
             if "-" in steps[-1]:
                 lst   = AllSteps.index(steps[-1].split("-")[1].split(":")[0]) #here we are assuming that - is always between two steps no GEN-SIM-DIGI, this is GEN-DIGI
             else:
                 lst   = AllSteps.index(steps[-1])
             runSteps = AllSteps[start:lst]
             numOfSteps = (lst - start) + 1
             stopIndex = start + numOfSteps
             #Handling the case in which the first user step is the same as the first step (GEN,SIM)
             #elif  not (steps[0] == AllSteps[0]) and (steps[0].split("-")[0] == "GEN"):
         else:
             #Handling the case of the last step being a composite one:
             if "-" in steps[-1]:
                 #Set the stop index at the last step of the composite step (WHY???) 
                 stopIndex = AllSteps.index(steps[-1].split("-")[1].split(":")[0]) + 1
             else:
                 
                 stopIndex = AllSteps.index(steps[-1].split(":")[0]) + 1
                 #print "Last step is %s and stopIndex is %s"%(steps[-1],stopIndex)
         steps = AllSteps
             
     unprofiledSteps = []
     rawreg = re.compile("^RAW2DIGI")
 
 #Horrible structure... to be rewritten sooner or later...
     
 #   FOR step in steps
 
     prevPrevOutputFile = ""
     #Add if to introduce the possibility to run on user selected input file.
     if userInputFile!="":
         previousOutputFile=userInputFile
     else:
         previousOutputFile = ""
 
     for x in range(start,stopIndex,1):
         if stepIndex >= stopIndex:
             break
         step = steps[stepIndex]
 
         # One shot Profiling variables
         befStep     = step
         aftStep     = step
         # We need this in case we are running one-shot profiling or for DIGI-PILEUP
         stepToWrite = step 
         
         CustomisePythonFragment = pythonFragment(step,cmsDriverOptions)
         oneShotProf = False
         hypsteps = []
 
         #Looking for step in userSteps, or for composite steps that step matches the first of a composite step in userSteps
         if step in userSteps or reduce(lambda x,y : x or y,map(lambda x: step == x.split("-")[0].split(":")[0],userSteps)): 
 
             if "GEN,FASTSIM" in userSteps: # HLT/L1 menu workaround
                 stepToWrite = stepToWrite + ",HLT:GRun"
             elif "HLT" in userSteps:
                 stepToWrite = stepToWrite.replace("HLT", "HLT:GRun")
             
             #Checking now if the current step matches the first of a composite step in userSteps
             hypMatch = [x for x in [x for x in userSteps if step == x.split("-")[0]] if "-" in x]
             if not len(hypMatch) == 0 :
                 hypsteps    = expandHyphens(hypMatch[0])
                 #print hypsteps
                 #print hypMatch[0]
                 stepToWrite = ",".join(hypsteps)
                 if "GEN,SIM-HLT" in userSteps: # HLT/L1 menu workaround
                     stepToWrite = stepToWrite.replace("HLT","HLT:GRun")
                 befStep     = hypsteps[0]
                 #Kludge to avoid running HLT in composite steps if the -b option is chosen
                 if bypasshlt and hypsteps[-1]=='HLT':
                     aftStep     = hypsteps[-2]
                 else:
                     aftStep     = hypsteps[-1]
                 oneShotProf = True
             if [x for x in userSteps if stepToWrite==x.split(":")[0]]:
                 #print "Inside the filter if!"
                 #print stepToWrite
                 #Here we are assuming that the steps specified with : are not duplicate in the userSteps command:
                 #i.e. GEN-DIGI:SequenceA,HLT:1E31 is OK
                 #GEN-DIGI:SequenceA,HLT:SequenceB,HLT:1E31 IS NOT (OF COURSE!) 
                 stepToWrite=filter(lambda x: stepToWrite==x.split(":")[0],userSteps)[0]
                 #print stepToWrite
 
             writeStepHead(simcandles,acandle,stepToWrite)
 
             #Set the output file name for Pile up and for regular case:
             if "GEN,SIM-HLT" or "GEN,FASTSIM" or "HLT" in userSteps: # change to make root file output work (without colons)
                 stepToWrite = stepToWrite.replace(":","=")
 
             if '--pileup' in cmsDriverOptions:
                 outfile = stepToWrite + "_PILEUP"
             else:
                 outfile = stepToWrite
 
             #print stepToWrite
 
             if "GEN,SIM-HLT" or "GEN,FASTSIM" or "HLT" in userSteps: # change it back
                 stepToWrite = stepToWrite.replace("=",":")
 
             OutputFile = setOutputFileOption(acandle,outfile)
             if fstROOTfile:
                 fstROOTfileStr = OutputFile
                 fstROOTfile = False
             OutputFileOption = "--fileout=" + OutputFile
 
             for prof in Profile:
                 #First prepare the cmsDriver.py command
                 
                 #Special case of EventEdmSize profiling 
                 if 'EdmSize' in prof:
                     EdmFile = "%s_%s.root" % (FileName[acandle],outfile) #stepToWrite) #Bug in the filename for EdmSize for PileUp corrected.
                     #EventEdmSize needs a pre-requisite step that just produces the root file if one decided to run with only EdmSize profiling!
                     if prof == Profile[0] and not os.path.exists("./" + EdmFile):
                         # insert command to generate required state ( need to run one more step
                         # so that EDM can actually check the size of the root file
                         # If the first step to be profiled is something later on in the steps such
                         # as HLT then writePrerequisteSteps() should have got you to the step prior to
                         # HLT, therefore the only thing left to run to profile EDMSIZE is HLT itself
 
                         InputFileOption = "--filein file:" + previousOutputFile
                         #Kludge to bypass HLT output... here's a problem... since the unprofiled steps could contain HLT!
                         if rawreg.search(step) and bypasshlt and 'DIGI2RAW.root' in prevPrevOutputFile:
                             InputFileOption = "--filein file:" + prevPrevOutputFile
                         if previousOutputFile == "":
                             InputFileOption = setInputFile(steps,stepToWrite,acandle,stepIndex,pileup=pileup,bypasshlt=bypasshlt)
                         Command = ("%s %s -n %s --step=%s %s %s --customise=%s %s"
                                            % (cmsDriver,
                                               KeywordToCfi[acandle],
                                               NumberOfEvents,
                                               stepToWrite,
                                               InputFileOption,
                                               OutputFileOption,
                                               CustomisePythonFragment,
                                               cmsDriverOptions) )
                         simcandles.write( "%s @@@ None @@@ None\n" % (Command))
 
                     Command = EdmFile
                 #all other profiles:
                 else:
                     InputFileOption = "--filein file:" + previousOutputFile
                     if rawreg.search(step) and bypasshlt and 'DIGI2RAW.root' in prevPrevOutputFile:
                         InputFileOption = "--filein file:" + prevPrevOutputFile
 
                     if previousOutputFile == "":
                         InputFileOption = setInputFile(steps,befStep,acandle,stepIndex,pileup,bypasshlt)
 
                     #if '--pileup' in cmsDriverOptions:
                     #    stepToWrite = pileupStep
                     if '--pileup' in cmsDriverOptions and ( stepToWrite=='GEN,SIM' or stepToWrite=='SIM'): 
                         Command = ("%s %s -n %s --step=%s %s %s --customise=%s %s" % (
                                cmsDriver,
                                KeywordToCfi[acandle],
                                NumberOfEvents,
                                stepToWrite,
                                InputFileOption,
                                OutputFileOption,
                                CustomiseFragment['GEN,SIM'],#Done by hand to avoid silly use of MixinModule.py for pre-digi individual steps
                                cmsDriverOptions[:cmsDriverOptions.index('--pileup')]
                            ))
                     elif '--pileup' in cmsDriverOptions and (stepToWrite=='GEN,FASTSIM' or stepToWrite=='GEN,FASTSIM,HLT:GRun'): #Adding GEN,FASTIM case exception and use the CustomiseFragment['DIGI']
                                                                                                                                 #+exception to the HLT:GRun case
                         Command = ("%s %s -n %s --step=%s %s %s --customise=%s %s" % (
                                cmsDriver,
                                KeywordToCfi[acandle],
                                NumberOfEvents,
                                stepToWrite,
                                InputFileOption,
                                OutputFileOption,
                                CustomiseFragment['DIGI'],#Done by hand to avoid silly use of MixinModule.py for pre-digi individual steps
                                cmsDriverOptions #For FASTSIM PU need the whole cmsDriverOptions! [:cmsDriverOptions.index('--pileup')] 
                            ))
                     
                     else:
                         Command = ("%s %s -n %s --step=%s %s %s --customise=%s %s" % (
                                cmsDriver,
                                KeywordToCfi[acandle],
                                NumberOfEvents,
                                stepToWrite,
                                InputFileOption,
                                OutputFileOption,
                                CustomisePythonFragment,
                                cmsDriverOptions
                            ))
                 #Now the cmsDriver command is ready in Command, we just edit the rest of the line and write it to the file!
                 if _noprof:
                     simcandles.write("%s @@@ None @@@ None\n" % Command)
                 else:
                     if 'valgrind' in prof:
                         #I think the if is safer even though all commands in this "else" (i.e. non EdmSize) should be OK.
                         if 'TimeMemoryInfo.py' in Command:
                             Command=Command.replace('--customise=Validation/Performance/TimeMemoryInfo.py', '')
                         #There is actually also the SIM case to take care of:
                         elif 'TimeMemoryG4Info.py' in Command:
                             Command=Command.replace('--customise=Validation/Performance/TimeMemoryG4Info.py', '')
                     stepLabel=stepToWrite
                     #print "stepLabel is %s"%stepLabel
                     if '--pileup' in cmsDriverOptions and not "_PILEUP" in stepToWrite:
                         stepLabel = stepToWrite+"_PILEUP"
                     #Add kludge here to make the IGPROF ANALYSE work:
                     #The idea is to:
                     #1-Check if ANALYSE is there everytime we're handling IGPROF profiles
                     #2-If it is there then write 2 lines instead of 1: add a @@@ reuse to the first line and a second line with ANALYSE @@@ the same metadata
                     #[3-Catch the case of ANALYSE by itself and raise an exception]
                     #4-Catch the case of ANALYSE proper, and do nothing in that case (already taken care by the second lines done after PERF_TICKS, MEM_TOTAL and MEM_LIVE.
                     #print "EEEEEEE %s"%prof
                     #We actually want the analyse to be used also for IgProf perf!
                     if 'IgProf' in prof: # and 'perf' not in prof:
                         #New IgProf naming scheme:
                         #Add a new naming scheme to simplify the handling in igprof-navigator:
                         #Candle___Step___Conditions__PileUpOption__IgProfProfile___Event.gz (and .sql3)
 
                         #Creating the IgProfProfile variable, to be either IgProfMem or IgProfPerf, the two types of profiling:
                         IgProfProfile="IgProf"
                         if "Mem" in prof:
                             if "reuse" in prof:
                                 IgProfProfile="IgProfMem @@@ reuse"
                             else:
                                 IgProfProfile="IgProfMem"
                         else:
                             if "reuse" in prof:
                                 IgProfProfile="IgProfPerf @@@ reuse"
                             else:
                                 IgProfProfile="IgProfPerf"
 
                         #Conditions and PileUpOption are extracted from the cmsDriverOptions:
                         Conditions="UNKNOWN_CONDITIONS"
                         PileUp="NOPILEUP"
                         EventContent="UNKNOWN_EVENTCONTENT"
                         tokens=cmsDriverOptions.split("--")
                         for token in tokens:
                             keywords=token.split(" ")
                             if "=" in keywords[0]:
                                 keywords=keywords[0].split("=")
                             if "conditions" in keywords[0]:
                                 # check if we are using the autoCond style of flexible conditions
                                 # if so, expand the condition here so that the file names contain the real conditions
                                 if "auto:" in keywords[1]:
                                     from Configuration.AlCa.autoCond import autoCond
                                     fileConditionsOption = autoCond[ keywords[1].split(':')[1] ]
                                     Conditions = autoCond[ keywords[1].split(':')[1] ].split("::")[0] 
                                 else:
                                     # old style, hardcoded, conditions ...
                                     # Complicated expression, just to get rid of FrontierConditions_GlobalTag,
                                     # and ::All at the end:
                                     # Added if to handle new --conditions convention for cmsDriver.py (no more
                                     # FrontierConditions... in front of it)
                                     if "," in keywords[1]: 
                                         Conditions=keywords[1].split(",")[1].split("::")[0] #"backward" compatibility...
                                     else:
                                         Conditions=keywords[1].split("::")[0] 
                             elif "pileup" in keywords[0]:
                                 PileUp=keywords[1]
                             elif "eventcontent" in keywords[0]:
                                 EventContent=keywords[1]
 
                         #so here's our new MetaName:
                         MetaName=acandle+"___"+stepToWrite+"___"+PileUp+"___"+Conditions+"___"+EventContent+"___"+IgProfProfile
                         
                         if 'Analyse' not in prof and (lambda x: 'Analyse' in x,Profile):
                                 
                             simcandles.write("%s @@@ %s @@@ %s\n" % (Command,
                                                                            Profiler[prof],
                                                                            MetaName))
                                                                            #FileName[acandle],
                                                                            #stepLabel,
                                                                            #prof))
                             analyse_command = ("%s @@@ %s @@@ %s\n" % (Command,
                                                                            Profiler[prof].split(".")[0]+'.ANALYSE.'+Profiler[prof].split(".")[1], #Add the IgProf counter in here (e.g. IgProfMem.ANALYSE.MEM_TOTAL)
                                                                            MetaName))
                                                                            #FileName[acandle],
                                                                            #stepLabel,
                                                                            #prof))
 
                             #for the relval case, GEN-SIM,HLT get rid of the last " @@@ reuse":
                             if Profiler[prof] == 'IgProf_mem.MEM_MAX' or Profiler[prof] == 'IgProf_perf.PERF_TICKS':
                                 analyse_command = analyse_command.replace("@@@ reuse", "")
 
                             simcandles.write(analyse_command)
 
                         elif 'Analyse' in prof:
                             pass
                     else:    
                         simcandles.write("%s @@@ %s @@@ %s_%s_%s\n" % (Command,
                                                                        Profiler[prof],
                                                                        FileName[acandle],
                                                                        stepLabel,
                                                                        prof))
 
                 if debug:
                     print(InputFileOption, step, 'GEN,SIM' in step, 'HLT' in steps[stepIndex - 1], steps)
                     print("cmsDriveroptions : " + cmsDriverOption)
             prevPrevOutputFile = previousOutputFile          
             previousOutputFile = OutputFile
         else:
             unprofiledSteps.append(step)
             isNextStepForProfile = False # Just an initialization for scoping. don't worry about it being false
             
             try:
                 isNextStepForProfile = steps[stepIndex + 1] in userSteps or reduce(lambda x,y : x or y,map(lambda z: steps[ stepIndex + 1 ] == z.split("-")[0].split(":")[0],userSteps))
                 #print "YES found Step %s when looking with standard step %s"%(steps[stepIndex],steps[stepIndex])
             except IndexError:
                 # This loop should have terminated if x + 1 is out of bounds!
                 print("Error: Something is wrong we shouldn't have come this far")
                 break
 
             if isNextStepForProfile:
                 #Minimum intervention solution is to fix it here: I think we need to pass the before and after steps...
                 OutputFile=writeUnprofiledSteps(simcandles,CustomisePythonFragment,cmsDriverOptions,unprofiledSteps,previousOutputFile,acandle,NumberOfEvents,stepIndex,pileup,bypasshlt)
                 unprofiledSteps = []
                 prevPrevOutputFile = previousOutputFile          
                 previousOutputFile = OutputFile
         #Dangerous index handling when looping over index x!        
         if oneShotProf:
             stepIndex += len(hypsteps)            
         else:
             stepIndex +=1
     return fstROOTfileStr
 

def cmsRelvalreportInput.writeCommandsToReport	(	simcandles,
		Candle,
		Profile,
		debug,
		NumberOfEvents,
		cmsDriverOptions,
		steps,
		bypasshlt,
		userInputFile
	)

Definition at line 918 of file cmsRelvalreportInput.py.

References edm.print(), and writeCommands().

Referenced by main().

 def writeCommandsToReport(simcandles,Candle,Profile,debug,NumberOfEvents,cmsDriverOptions,steps,bypasshlt,userInputFile):
 
     OutputStep = ''
 
     # This option will not be used for now since the event content names keep changing, it can be
     # edited by hand pre-release by pre-release if wanted (Still moved all to FEVTDEBUGHLT for now, except RECO, left alone).
     #
     #EventContent = {'GEN,SIM': 'FEVTDEBUGHLT', 'DIGI': 'FEVTDEBUGHLT'}
 
     for acandle in Candle:
         print('*Candle ' + acandle)
         
         ##################
         # If the first profiling we run is EdmSize we need to create the root file first
         #
 
         #Here all candles are processed with all the same command, and in the pileup case they will have the pileup settings set correctly already:
         #print "1-userInputFile: %s"%userInputFile
         
         fstoutfile = writeCommands(simcandles,
                                    Profile,
                                    acandle,
                                    steps,
                                    NumberOfEvents,
                                    cmsDriverOptions,
                                    bypasshlt,
                                    0,
                                    False,
                                    userInputFile)
         
 

def cmsRelvalreportInput.writePrerequisteSteps	(	simcandles,
		steps,
		acandle,
		NumberOfEvents,
		cmsDriverOptions,
		pileup,
		bypasshlt
	)

Definition at line 528 of file cmsRelvalreportInput.py.

References pythonFragment(), split, and writeUnprofiledSteps().

Referenced by writeCommands().

 def writePrerequisteSteps(simcandles,steps,acandle,NumberOfEvents,cmsDriverOptions,pileup,bypasshlt):
     fstIdx = -1
     #Hack for GEN-FASTSIM workflow:
     #if steps=="GEN,FASTSIM":   
     #if "-" in steps[0]:
     fstIdx = AllSteps.index(steps[0].split("-")[0].split(":")[0])
     #else:
     #    fstIdx = AllSteps.index(steps[0])
     CustomisePythonFragment = pythonFragment("GEN,SIM",cmsDriverOptions)
     previousOutputFile=""
     OutputFile = writeUnprofiledSteps(simcandles, CustomisePythonFragment, cmsDriverOptions,AllSteps[0:fstIdx],previousOutputFile,acandle,NumberOfEvents, 0,pileup,bypasshlt) 
     return (fstIdx, OutputFile)
 

def cmsRelvalreportInput.writeReportFileHeader	(	CMSSW_VERSION,
		CMSSW_RELEASE_BASE,
		CMSSW_BASE
	)

Definition at line 362 of file cmsRelvalreportInput.py.

References edm.print().

Referenced by main().

 def writeReportFileHeader(CMSSW_VERSION,CMSSW_RELEASE_BASE,CMSSW_BASE):
 
     SimCandlesFile = 'SimulationCandles_%s.txt' % CMSSW_VERSION
     
     try:
         simcandles = open(SimCandlesFile, 'w')
     except IOError:
         print("Couldn't open %s to save" % SimCandlesFile)
 
     simcandles.write('#Candles file automatically generated by %s for %s\n'
                       % (THIS_PROG_NAME, CMSSW_VERSION))
     simcandles.write("#CMSSW Base  : %s\n"   % CMSSW_BASE)
     simcandles.write("#Release Base: %s\n"   % CMSSW_RELEASE_BASE)
     simcandles.write("#Version     : %s\n\n" % CMSSW_VERSION)
 
     return simcandles
 

def cmsRelvalreportInput.writeStepHead	(	simcandles,
		acandle,
		step
	)

Definition at line 425 of file cmsRelvalreportInput.py.

Referenced by writeCommands().

 def writeStepHead(simcandles,acandle,step):
     simcandles.write('#%s\n' % FileName[acandle])
     simcandles.write('#Step %s\n' % step)
     #print step
 
 

def cmsRelvalreportInput.writeUnprofiledSteps	(	simcandles,
		CustomisePythonFragment,
		cmsDriverOptions,
		unprofiledSteps,
		previousOutputFile,
		acandle,
		NumberOfEvents,
		stepIndex,
		pileup,
		bypasshlt
	)

Definition at line 481 of file cmsRelvalreportInput.py.

References join(), and setInputFile().

Referenced by writeCommands(), and writePrerequisteSteps().

 def writeUnprofiledSteps(simcandles,CustomisePythonFragment,cmsDriverOptions,unprofiledSteps,previousOutputFile,acandle,NumberOfEvents, stepIndex, pileup,bypasshlt):
     # reduce(lambda x,y : x + "," + "y",unprofiledSteps)
     #stepsStr = ",".join(unprofiledSteps)
 
     
     #print "unprofiledSteps is %s"%unprofiledSteps
     #print "22acandle is %s"%acandle
     #Kludge in case -b option to skip HLT is used...
     if bypasshlt and unprofiledSteps[-1]=="HLT":
         stepsStr = ",".join(unprofiledSteps[:-1])
         OutputFile = "%s_%s.root" % ( FileName[acandle],unprofiledSteps[-2])
     else:
         stepsStr = ",".join(unprofiledSteps)
         OutputFile = "%s_%s.root" % ( FileName[acandle],unprofiledSteps[-1])
     simcandles.write("\n#Run a %s step(s) that has not been selected for profiling but is needed to run the next step to be profiled\n" % (stepsStr))
     OutputFileOption = "--fileout=%s" % OutputFile
     #Bug here: should take into account the flag --bypass-hlt instead of assuming hlt should be bypassed
     #This affects the Step1/Step2 running since Step1 will produce an HLT.root file and Step2 should start from there!
     #Adding the argument bypasshlt to the calls...
     #PreviousInputFile=AllSteps[AllSteps.index(unprofiledSteps[0])-1]
     #print "StepIndex 1:%s"%stepIndex
     #Correcting a bug: when unprofiled intermediate steps are present it would skip 1 step...
     #stepIndexAdjust=stepIndex - 2
     #if stepIndexAdjust < 0: #To avoid issues with negative indeces
     #    stepIndexAdjust=0
     #InputFileOption = setInputFile(AllSteps,unprofiledSteps[0],acandle,stepIndexAdjust,bypasshlt=bypasshlt)
     #Use an argument to make it easier:
     InputFileOption = "--filein file:" + previousOutputFile
     if previousOutputFile =="":
         InputFileOption = setInputFile(AllSteps,unprofiledSteps[0],acandle,stepIndex,pileup=pileup,bypasshlt=bypasshlt)
     #Introduce an over-ride of cmsDriverOptions:
     #For the case of unprofiled steps, always run them with FEVTDEBUGHLT eventcontent
     #At the moment the only use case is when running step2 on its own...
     for eventcontent in EventContents:
         cmsDriverOptions=re.sub(eventcontent,'FEVTDEBUGHLT',cmsDriverOptions)
     Command = ("%s %s -n %s --step=%s %s %s --customise=%s %s"
                        % (cmsDriver,
                           KeywordToCfi[acandle],
                           NumberOfEvents,
                           stepsStr,
                           InputFileOption,
                           OutputFileOption,
                           CustomisePythonFragment,
                           cmsDriverOptions) )
     simcandles.write( "%s @@@ None @@@ None\n\n" % (Command))
     return OutputFile
 

Variable Documentation

cmsRelvalreportInput.AfterPileUpSteps

Definition at line 40 of file cmsRelvalreportInput.py.

cmsRelvalreportInput.AllSteps

Definition at line 39 of file cmsRelvalreportInput.py.

cmsRelvalreportInput.cmsDriver

Definition at line 35 of file cmsRelvalreportInput.py.

cmsRelvalreportInput.debug

Definition at line 37 of file cmsRelvalreportInput.py.

cmsRelvalreportInput.DEF_STEPS

Definition at line 38 of file cmsRelvalreportInput.py.

cmsRelvalreportInput.hypreg

Definition at line 36 of file cmsRelvalreportInput.py.

cmsRelvalreportInput.Profiler

Definition at line 46 of file cmsRelvalreportInput.py.

cmsRelvalreportInput.THIS_PROG_NAME

Global variables.

Definition at line 34 of file cmsRelvalreportInput.py.

Functions

Variables

Function Documentation

Variable Documentation