TEcnaParHistos Class Reference

#include <TEcnaParHistos.h>

Inheritance diagram for TEcnaParHistos:

Public Member Functions
Float_t	AxisLabelOffset ()
Float_t	AxisLabelOffset (const TString &)
Float_t	AxisLabelSize ()
Float_t	AxisLabelSize (const TString &)
Float_t	AxisTickSize ()
Float_t	AxisTickSize (const TString &)
Float_t	AxisTitleOffset ()
Float_t	AxisTitleOffset (const TString &)
Float_t	AxisTitleSize ()
Float_t	AxisTitleSize (const TString &)
Double_t	BoxBottomY (const TString &)
Double_t	BoxLeftX (const TString &)
Double_t	BoxRightX (const TString &)
Double_t	BoxTopY (const TString &)
TString	BuildStandard1DHistoCodeX (const TString &, const TString &)
TString	BuildStandard1DHistoCodeXY (const TString &)
TString	BuildStandard1DHistoCodeY (const TString &, const TString &)
TString	BuildStandardBetweenWhatCode (const TString &, const TString &)
TString	BuildStandardCovOrCorCode (const TString &, const TString &)
TString	BuildStandardDetectorCode (const TString &)
TString	BuildStandardPlotOption (const TString &, const TString &)
UInt_t	CanvasFormatH (const TString &)
UInt_t	CanvasFormatW (const TString &)
Color_t	ColorDefinition (const TString &)
Color_t	ColorTab (const Int_t &)
Float_t	DeeNameOffsetX (const Int_t &)
Float_t	DeeNumberOffsetX (const TString &, const Int_t &)
Float_t	DeeOffsetX (const TString &, const Int_t &)
TString	GetCodeAllXtalsInStinPlot ()
TString	GetCodeOnlyOnePlot ()
Int_t	GetCodePlotAllXtalsInStin ()
TString	GetCodeSameOnePlot ()
TString	GetCodeSeveralPlot ()
TString	GetHistoType (const TString &)
Double_t	GetMarginAutoMinMax ()
Int_t	GetMaxNbOfColors ()
Int_t	GetNbOfRunsDisplayed ()
TString	GetQuantityName (const TString &)
TString	GetTechHistoCode (const TString &)
TString	GetTechHistoCode (const TString &, const TString &)
TString	GetXVarHisto (const TString &, const TString &, const Int_t &)
Double_t	GetYmaxDefaultValue (const TString &)
Double_t	GetYminDefaultValue (const TString &)
TString	GetYVarHisto (const TString &, const TString &, const Int_t &)
void	Init ()
void	ListOfStandardCodes (const TString &)
Int_t	MaxNbOfRunsInLists ()
UInt_t	SetCanvasHeight (const TString &, const TString &)
UInt_t	SetCanvasWidth (const TString &, const TString &)
void	SetColorPalette (const TString &)
Color_t	SetColorsForNumbers (const TString &)
void	SetEcalSubDetector (const TString &)
void	SetEcalSubDetector (const TString &, const TEcnaParEcal *, const TEcnaNumbering *)
TPaveText *	SetOptionSamePaveBorder (const TString &, const TString &)
TPaveText *	SetPaveAnalysisRun (const TString &, const Int_t &, const Int_t &, const TString &, const Int_t &, const Int_t &, const TString &)
TPaveText *	SetPaveCrystal (const Int_t &, const Int_t &, const Int_t &)
TPaveText *	SetPaveCrystal (const Int_t &, const Int_t &, const Int_t &, const Int_t &, const Int_t &)
TPaveText *	SetPaveCrystalSample (const Int_t &, const Int_t &, const Int_t &, const Int_t &)
TPaveText *	SetPaveCxyz (const Int_t &)
TPaveText *	SetPaveDee (const TString &, const Int_t &, const TString &)
TPaveText *	SetPaveEvolNbOfEvtsAna (const TString &, const Int_t &, const Int_t &, const Int_t &, const TString &)
TPaveText *	SetPaveEvolRuns (const Int_t &, const TString &, const Int_t &, const TString &, const TString &, const TString &)
TPaveText *	SetPaveGeneralComment (const TString &)
TPaveText *	SetPaveLVRB (const Int_t &, const Int_t &)
TPaveText *	SetPaveNbOfEvts (const Int_t &, const TString &, const TString &, const TString &)
TPaveText *	SetPaveSC (const Int_t &, const Int_t &)
TPaveText *	SetPaveSCsXY (const Int_t &, const Int_t &)
TPaveText *	SetPaveSM (const TString &, const Int_t &, const TString &)
TPaveText *	SetPaveStas ()
TPaveText *	SetPaveStex (const TString &, const Int_t &)
TPaveText *	SetPaveStin (const Int_t &, const Int_t &)
TPaveText *	SetPaveStinsXY (const Int_t &, const Int_t &)
TPaveText *	SetPaveTower (const Int_t &)
TPaveText *	SetPaveTowersXY (const Int_t &, const Int_t &)
void	SetViewGraphOffsets (TGraph *, const TString &)
void	SetViewHistoOffsets (TH1D *, const TString &, const TString &)
void	SetViewHistoPadMargins (const TString &, const TString &)
void	SetViewHistoStats (TH1D *, const TString &)
void	SetViewHistoStyle (const TString &)
	TEcnaParHistos ()
	TEcnaParHistos (TEcnaObject *, const TString &)
	TEcnaParHistos (const TString &, const TEcnaParEcal *, const TEcnaNumbering *)
	~TEcnaParHistos () override

Private Attributes
TString	fAllXtalsInStinPlot
Int_t	fCdelete
Int_t	fCdeleteRoot
Int_t	fCnaCommand
Int_t	fCnaError
Int_t	fCnew
Int_t	fCnewRoot
TEcnaParEcal *	fEcal
TEcnaNumbering *	fEcalNumbering
TString	fFlagSubDet
Int_t	fgMaxCar
Double_t	fMarginAutoMinMax
Int_t	fMaxColorNumber
Int_t	fMaxNbOfRunsInLists
Int_t	fNbOfRunsDisplayed
TString	fOnlyOnePlot
Int_t	fPlotAllXtalsInStin
TString	fSameOnePlot
TString	fSeveralPlot
TString	fTTBELL

Detailed Description

---

TEcnaParHistos.h Update: 05/10/2012 Author: B.Fabbro (berna.nosp@m.rd.f.nosp@m.abbro.nosp@m.@cea.nosp@m..fr) DSM/IRFU/SPP CEA-Saclay Copyright: Those valid for CEA sofware

ECNA web page: http://cms-fabbro.web.cern.ch/cms-fabbro/

cna_new/Correlated_Noise_Analysis/ECNA_main_page.htm

Values of different parameters for plots in the framework of TEcnaHistos
(see TEcnaHistos documentation)

Examples of parameters:  ymin and ymax values for histos, title sizes,
                         margins for plots, etc...

Definition at line 44 of file TEcnaParHistos.h.

Constructor & Destructor Documentation

TEcnaParHistos::TEcnaParHistos

(

)

Definition at line 33 of file TEcnaParHistos.cc.

References Init().

{
// Constructor without argument

  //std::cout << "[Info Management] CLASS: TEcnaParHistos.     CREATE OBJECT: this = " << this << std::endl;

  Init();
}

TEcnaParHistos::TEcnaParHistos	(	TEcnaObject *	pObjectManager,
		const TString &	SubDet
	)

Definition at line 42 of file TEcnaParHistos.cc.

References fEcal, fEcalNumbering, TEcnaObject::GetPointerValue(), Init(), TEcnaObject::RegisterPointer(), and SetEcalSubDetector().

{
// Constructor without argument

  //std::cout << "[Info Management] CLASS: TEcnaParHistos.     CREATE OBJECT: this = " << this << std::endl;

  Init();
  Long_t i_this = (Long_t)this;
  pObjectManager->RegisterPointer("TEcnaParHistos", i_this);

  //............................ fEcal  => to be changed in fParEcal
  fEcal = nullptr;
  Long_t iParEcal = pObjectManager->GetPointerValue("TEcnaParEcal");
  if( iParEcal == 0 )
    {fEcal = new TEcnaParEcal(pObjectManager, SubDet.Data()); /*fCnew++*/}
  else
    {fEcal = (TEcnaParEcal*)iParEcal;}

  //............................ fEcalNumbering
  fEcalNumbering = nullptr;
  Long_t iEcalNumbering = pObjectManager->GetPointerValue("TEcnaNumbering");
  if( iEcalNumbering == 0 )
    {fEcalNumbering = new TEcnaNumbering(pObjectManager, SubDet.Data()); /*fCnew++*/}
  else
    {fEcalNumbering = (TEcnaNumbering*)iEcalNumbering;}

  SetEcalSubDetector(SubDet.Data());
}

TEcnaParHistos::TEcnaParHistos	(	const TString &	SubDet,
		const TEcnaParEcal *	pEcal,
		const TEcnaNumbering *	pEcalNumbering
	)

Definition at line 73 of file TEcnaParHistos.cc.

References Init(), and SetEcalSubDetector().

{
// Constructor with argument

  //std::cout << "[Info Management] CLASS: TEcnaParHistos.     CREATE OBJECT: this = " << this << std::endl;

  Init();
  SetEcalSubDetector(SubDet.Data(), pEcal, pEcalNumbering);
}

TEcnaParHistos::~TEcnaParHistos ( )

override

Definition at line 18 of file TEcnaParHistos.cc.

{
  //destructor
  
  //if (fEcalNumbering != 0){delete  fEcalNumbering; fCdelete++;}
  //if (fEcal          != 0){delete  fEcal;          fCdelete++;}
  
  //std::cout << "[Info Management] CLASS: TEcnaParHistos.     DESTROY OBJECT: this = " << this << std::endl;
}

Member Function Documentation

Float_t TEcnaParHistos::AxisLabelOffset

(

)

Definition at line 1021 of file TEcnaParHistos.cc.

Referenced by TEcnaHistos::EEGridAxis(), TEcnaHistos::ViewEBGrid(), TEcnaHistos::ViewSCGrid(), TEcnaHistos::ViewSMGrid(), and TEcnaHistos::ViewTowerGrid().

{
 return AxisLabelOffset("");
}

Float_t TEcnaParHistos::AxisLabelOffset

(

const TString &

opt

)

Definition at line 1025 of file TEcnaParHistos.cc.

{
  Float_t lab_off = 0.02;
  if( opt == ""    ){lab_off = 0.02;}

  if( opt == "Towx"){lab_off = 0.01;}
  if( opt == "Towy"){lab_off = 0.03;}
  if( opt == "SMx" ){lab_off = 0.01;}
  if( opt == "SMy" ){lab_off = 0.015;}
  if( opt == "EBx" ){lab_off = 0.03;}
  if( opt == "EBy" ){lab_off = 0.015;}

  if( opt == "SCx" ){lab_off = 0.01;}
  if( opt == "SCy" ){lab_off = 0.03;}
  if( opt == "Deex"){lab_off = 0.002;}
  if( opt == "Deey"){lab_off = 0.03;}
  if( opt == "EEx" ){lab_off = 0.015;}
  if( opt == "EEy" ){lab_off = 0.02;}

  return lab_off;
}

Float_t TEcnaParHistos::AxisLabelSize

(

)

Definition at line 1047 of file TEcnaParHistos.cc.

Referenced by TEcnaHistos::EEGridAxis(), TEcnaHistos::ViewEBGrid(), TEcnaHistos::ViewSCGrid(), TEcnaHistos::ViewSMGrid(), and TEcnaHistos::ViewTowerGrid().

{
 return AxisLabelSize("");
}

Float_t TEcnaParHistos::AxisLabelSize

(

const TString &

opt

)

Definition at line 1051 of file TEcnaParHistos.cc.

{
  Float_t lab_siz = 0.035;
  if( opt == "SMx"  ){lab_siz = 0.05;}
  if( opt == "SMy"  ){lab_siz = 0.05;}
  if( opt == "EBx"  ){lab_siz = 0.04;}
  if( opt == "EBy"  ){lab_siz = 0.04;}
  return lab_siz;
}

Float_t TEcnaParHistos::AxisTickSize

(

)

Definition at line 1061 of file TEcnaParHistos.cc.

Referenced by TEcnaHistos::EEGridAxis(), TEcnaHistos::ViewEBGrid(), TEcnaHistos::ViewSCGrid(), TEcnaHistos::ViewSMGrid(), and TEcnaHistos::ViewTowerGrid().

{
 return AxisTickSize("");
}

Float_t TEcnaParHistos::AxisTickSize

(

const TString &

opt

)

Definition at line 1065 of file TEcnaParHistos.cc.

{
//.......... works only with option "S" in TGaxis
  Float_t tic_siz = 0.;  
  if( opt == "Dee"  ){tic_siz = 0.;}
  if( opt == "Deex" ){tic_siz = 0.01;}
  if( opt == "Deey" ){tic_siz = 0.02;}
  if( opt == "SMx"  ){tic_siz = 0.03;}
  if( opt == "SMy"  ){tic_siz = 0.0075;}
  if( opt == "EEx"  ){tic_siz = 0.06;}
  if( opt == "EEy"  ){tic_siz = 0.005;}

  return tic_siz;
}

Float_t TEcnaParHistos::AxisTitleOffset

(

)

Definition at line 983 of file TEcnaParHistos.cc.

Referenced by TEcnaHistos::EEGridAxis(), TEcnaHistos::ViewEBGrid(), TEcnaHistos::ViewSCGrid(), TEcnaHistos::ViewSMGrid(), and TEcnaHistos::ViewTowerGrid().

{
 return AxisTitleOffset("");
}

Float_t TEcnaParHistos::AxisTitleOffset

(

const TString &

opt

)

Definition at line 987 of file TEcnaParHistos.cc.

{
  Float_t tit_off = 1.;

  if( opt == ""        ){tit_off = 0.055;}
  if( opt == "Towx"    ){tit_off = 1.15;}
  if( opt == "Towy"    ){tit_off = 1.15;}
  if( opt == "SMx"     ){tit_off = 1.15;}
  if( opt == "SMy"     ){tit_off = 0.5;}
  if( opt == "SMyInEB" ){tit_off = 0.7;}
  if( opt == "EBy"     ){tit_off = 1.;}
  if( opt == "EBx"     ){tit_off = 1.3;}

  if( opt == "SCx" ){tit_off = 1.15;}
  if( opt == "SCy" ){tit_off = 1.15;}
  if( opt == "Deex"){tit_off = 0.75;}
  if( opt == "Deey"){tit_off = 1.2;}
  if( opt == "EEx" ){tit_off = 1.2;}
  if( opt == "EEy" ){tit_off = 1.;}

  return tit_off;
}

Float_t TEcnaParHistos::AxisTitleSize

(

)

Definition at line 1010 of file TEcnaParHistos.cc.

Referenced by TEcnaHistos::EEGridAxis(), TEcnaHistos::ViewEBGrid(), TEcnaHistos::ViewSCGrid(), TEcnaHistos::ViewSMGrid(), and TEcnaHistos::ViewTowerGrid().

{
 return AxisTitleSize("");
}

Float_t TEcnaParHistos::AxisTitleSize

(

const TString &

opt

)

Definition at line 1014 of file TEcnaParHistos.cc.

{
  Float_t tit_siz = 0.045;
  if( opt == ""  ){tit_siz = 0.045;}
  return tit_siz;
}

Double_t TEcnaParHistos::BoxBottomY

(

const TString &

chtype

)

Definition at line 389 of file TEcnaParHistos.cc.

References relativeConstraints::value.

Referenced by TEcnaHistos::DeeSCNumbering(), TEcnaHistos::HistimePlot(), TEcnaHistos::HistoPlot(), SetOptionSamePaveBorder(), SetPaveAnalysisRun(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveCxyz(), SetPaveDee(), SetPaveEvolNbOfEvtsAna(), SetPaveEvolRuns(), SetPaveGeneralComment(), SetPaveLVRB(), SetPaveNbOfEvts(), SetPaveSC(), SetPaveSCsXY(), SetPaveSM(), SetPaveStas(), SetPaveTower(), SetPaveTowersXY(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::ViewStas(), and TEcnaHistos::ViewStex().

{
//Set the y bottom coordinate of the box

  Double_t value = 0.8;
  
  if ( chtype == "general_comment"      ) {value = 0.960;}

  if ( chtype == "top_left_box_SM"      ) {value = 0.880;}
  if ( chtype == "top_left_box_EB"      ) {value = 0.880;}
  if ( chtype == "top_mid_box_EB"       ) {value = 0.880;}
  if ( chtype == "top_right_box_EB"     ) {value = 0.880;}

  if ( chtype == "top_left_box_Dee"     ) {value = 0.925;}
  if ( chtype == "top_left_box_EE"      ) {value = 0.880;}
  if ( chtype == "top_mid_box_EE"       ) {value = 0.880;}
  if ( chtype == "top_right_box_EE"     ) {value = 0.880;}

  if ( chtype == "bottom_left_box"      ) {value = 0.010;}
  if ( chtype == "bottom_left_box_evol" ) {value = 0.010;}
  if ( chtype == "bottom_right_box"     ) {value = 0.010;}
  if ( chtype == "bottom_right_box_evol") {value = 0.010;}
  if ( chtype == "bottom_right_box_evpr") {value = 0.010;}
  if ( chtype == "several_plots_box"    ) {value = 0.010;}
  if ( chtype == "several_evol_box"     ) {value = 0.010;}
  if ( chtype == "several_evpr_box"     ) {value = 0.010;}

 return value;
}

Double_t TEcnaParHistos::BoxLeftX

(

const TString &

chtype

)

Definition at line 325 of file TEcnaParHistos.cc.

References relativeConstraints::value.

Referenced by TEcnaHistos::DeeSCNumbering(), TEcnaHistos::HistimePlot(), TEcnaHistos::HistoPlot(), TEcnaHistos::SCCrystalNumbering(), SetOptionSamePaveBorder(), TEcnaHistos::SetParametersCanvas(), SetPaveAnalysisRun(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveCxyz(), SetPaveDee(), SetPaveEvolNbOfEvtsAna(), SetPaveEvolRuns(), SetPaveGeneralComment(), SetPaveLVRB(), SetPaveNbOfEvts(), SetPaveSC(), SetPaveSCsXY(), SetPaveSM(), SetPaveStas(), SetPaveTower(), SetPaveTowersXY(), TEcnaHistos::SMTowerNumbering(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::TowerCrystalNumbering(), TEcnaHistos::ViewMatrix(), TEcnaHistos::ViewStas(), TEcnaHistos::ViewStex(), and TEcnaHistos::ViewStin().

{
//Set the x left coordinate of the box

  Double_t value = 0.4;

  if ( chtype == "general_comment"      ) {value = 0.015;}

  if ( chtype == "top_left_box_SM"      ) {value = 0.015;}
  if ( chtype == "top_left_box_EB"      ) {value = 0.015;}
  if ( chtype == "top_mid_box_EB"       ) {value = 0.350;}
  if ( chtype == "top_right_box_EB"     ) {value = 0.630;}

  if ( chtype == "top_left_box_Dee"     ) {value = 0.015;}
  if ( chtype == "top_left_box_EE"      ) {value = 0.015;}
  if ( chtype == "top_mid_box_EE"       ) {value = 0.240;}
  if ( chtype == "top_right_box_EE"     ) {value = 0.610;}

  if ( chtype == "bottom_left_box"      ) {value = 0.015;}
  if ( chtype == "bottom_left_box_evol" ) {value = 0.015;}
  if ( chtype == "bottom_mid_box"       ) {value = 0.250;}
  if ( chtype == "bottom_right_box"     ) {value = 0.455;}
  if ( chtype == "bottom_right_box_evol") {value = 0.540;}
  if ( chtype == "bottom_right_box_evpr") {value = 0.540;}

  if ( chtype == "several_plots_box"    ) {value = 0.015;}
  if ( chtype == "several_evol_box"     ) {value = 0.015;}
  if ( chtype == "several_evpr_box"     ) {value = 0.015;}

 return value;
}

Double_t TEcnaParHistos::BoxRightX

(

const TString &

chtype

)

Definition at line 357 of file TEcnaParHistos.cc.

References relativeConstraints::value.

Referenced by TEcnaHistos::DeeSCNumbering(), TEcnaHistos::HistimePlot(), TEcnaHistos::HistoPlot(), SetOptionSamePaveBorder(), SetPaveAnalysisRun(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveCxyz(), SetPaveDee(), SetPaveEvolNbOfEvtsAna(), SetPaveEvolRuns(), SetPaveGeneralComment(), SetPaveLVRB(), SetPaveNbOfEvts(), SetPaveSC(), SetPaveSCsXY(), SetPaveSM(), SetPaveStas(), SetPaveTower(), SetPaveTowersXY(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::ViewStas(), and TEcnaHistos::ViewStex().

{
//Set the x right coordinate of the box
  
  Double_t value = 0.6;
  
  if ( chtype == "general_comment"      ) {value = 0.680;}

  if ( chtype == "top_left_box_SM"      ) {value = 0.125;}
  if ( chtype == "top_left_box_EB"      ) {value = 0.349;}
  if ( chtype == "top_mid_box_EB"       ) {value = 0.629;}
  if ( chtype == "top_right_box_EB"     ) {value = 0.985;}

  if ( chtype == "top_left_box_Dee"     ) {value = 0.425;}
  if ( chtype == "top_left_box_EE"      ) {value = 0.260;}
  if ( chtype == "top_mid_box_EE"       ) {value = 0.609;}
  if ( chtype == "top_right_box_EE"     ) {value = 0.985;}

  if ( chtype == "bottom_left_box"      ) {value = 0.445;}
  if ( chtype == "bottom_left_box_evol" ) {value = 0.450;} // ex 370
  if ( chtype == "bottom_mid_box"       ) {value = 0.750;}
  if ( chtype == "bottom_right_box"     ) {value = 0.985;}
  if ( chtype == "bottom_right_box_evol") {value = 0.985;}
  if ( chtype == "bottom_right_box_evpr") {value = 0.985;}

  if ( chtype == "several_plots_box"    ) {value = 0.985;}
  if ( chtype == "several_evol_box"     ) {value = 0.635;}
  if ( chtype == "several_evpr_box"     ) {value = 0.635;}
  
 return value;
}

Double_t TEcnaParHistos::BoxTopY

(

const TString &

chtype

)

Definition at line 419 of file TEcnaParHistos.cc.

References relativeConstraints::value.

Referenced by TEcnaHistos::DeeSCNumbering(), TEcnaHistos::HistimePlot(), TEcnaHistos::HistoPlot(), TEcnaHistos::SCCrystalNumbering(), SetOptionSamePaveBorder(), TEcnaHistos::SetParametersCanvas(), SetPaveAnalysisRun(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveCxyz(), SetPaveDee(), SetPaveEvolNbOfEvtsAna(), SetPaveEvolRuns(), SetPaveGeneralComment(), SetPaveLVRB(), SetPaveNbOfEvts(), SetPaveSC(), SetPaveSCsXY(), SetPaveSM(), SetPaveStas(), SetPaveTower(), SetPaveTowersXY(), TEcnaHistos::SMTowerNumbering(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::TowerCrystalNumbering(), TEcnaHistos::ViewMatrix(), TEcnaHistos::ViewStas(), TEcnaHistos::ViewStex(), and TEcnaHistos::ViewStin().

{
//Set the y top coordinate of the box

  Double_t value = 0.9;
  
  if ( chtype == "general_comment"      ) {value = 0.999;}

  if ( chtype == "top_left_box_SM"      ) {value = 0.955;}
  if ( chtype == "top_left_box_EB"      ) {value = 0.955;}
  if ( chtype == "top_mid_box_EB"       ) {value = 0.955;}
  if ( chtype == "top_right_box_EB"     ) {value = 0.955;}

  if ( chtype == "top_left_box_Dee"     ) {value = 0.969;}
  if ( chtype == "top_left_box_EE"      ) {value = 0.955;}
  if ( chtype == "top_mid_box_EE"       ) {value = 0.955;}
  if ( chtype == "top_right_box_EE"     ) {value = 0.955;}
  
  if ( chtype == "bottom_left_box"      ) {value = 0.120;}  
  if ( chtype == "bottom_left_box_evol" ) {value = 0.120;}
  if ( chtype == "bottom_right_box"     ) {value = 0.120;}
  if ( chtype == "bottom_right_box_Dee" ) {value = 0.100;}

  if ( chtype == "bottom_right_box_evol") {value = 0.120;}
  if ( chtype == "bottom_right_box_evpr") {value = 0.120;}
  if ( chtype == "several_plots_box"    ) {value = 0.200;}
  if ( chtype == "several_evol_box"     ) {value = 0.200;}
  if ( chtype == "several_evpr_box"     ) {value = 0.200;}

 return value;
}

TString TEcnaParHistos::BuildStandard1DHistoCodeX	(	const TString &	CallingMethod,
		const TString &	UserHistoCode
	)

Definition at line 2525 of file TEcnaParHistos.cc.

References BuildStandard1DHistoCodeXY(), gather_cfg::cout, fTTBELL, and ListOfStandardCodes().

Referenced by TEcnaHistos::Plot1DHisto(), and TEcnaHistos::PlotHistory().

{
  //........................... user code -> standard code
  TString StandardHistoCode = "?";
  if( CallingMethod == "1D" || CallingMethod == "2DS" || CallingMethod == "Time" )
    {
      //======================================== Only X Quantity for 1D Histos
      if( UserHistoCode == "Tower" || UserHistoCode == "tower" || UserHistoCode == "tow" ||
      UserHistoCode == "Tower number" || UserHistoCode == "tower number" || UserHistoCode == "tow nb" ||
      UserHistoCode == "Tower#" || UserHistoCode == "tower#" || UserHistoCode == "tow#" ||
      UserHistoCode == "Tow#" || UserHistoCode == "Tow" )
    {StandardHistoCode = "Tow";}

      if( UserHistoCode == "Super crystal" || UserHistoCode == "SuperCrystal" || UserHistoCode == "SuperXtal" || 
      UserHistoCode == "Super crystal number" || UserHistoCode == "SuperCrystalNumber" ||
      UserHistoCode == "SuperXtalNumber" || 
      UserHistoCode == "Super crystal nb" || UserHistoCode == "SuperCrystal#" ||
      UserHistoCode == "SuperXtal#" ||
      UserHistoCode == "SC#" || UserHistoCode == "SC" )
    {StandardHistoCode = "SC";}

      if( UserHistoCode == "Crystal" || UserHistoCode == "crystal" || UserHistoCode == "Xtal" || 
      UserHistoCode == "Crystal number" || UserHistoCode == "crystal number" ||
      UserHistoCode == "Xtal number" || 
      UserHistoCode == "Crystal#" || UserHistoCode == "crystal#" || UserHistoCode == "Xtal#" ||
      UserHistoCode == "Xtal" )
    {StandardHistoCode = "Xtal";}

      if( StandardHistoCode == "Tow" || StandardHistoCode == "SC" || StandardHistoCode == "Xtal" )
    {StandardHistoCode = "XtalORStin";} // management by means of fFapStexNumber ( >0 => Xtal ; =0 => Tow .OR. SC )

      if( UserHistoCode == "Sample number" || UserHistoCode == "SampleNumber" ||
      UserHistoCode == "Sample#" || UserHistoCode == "Samp#" ||
      UserHistoCode == "Sample" || UserHistoCode == "sample" ||
      UserHistoCode == "Smp" )
    {StandardHistoCode = "Smp";}

      if( UserHistoCode == "Event" || UserHistoCode == "event" ||
      UserHistoCode == "Event number" || UserHistoCode == "event number" || 
      UserHistoCode == "EventNumber"  || UserHistoCode == "Event#" || 
      UserHistoCode == "EvtNumber"    || UserHistoCode == "Evt#" ||
      UserHistoCode == "Evt number"   || UserHistoCode == "evt number" ||
      UserHistoCode == "Evt" )
    {StandardHistoCode = "Evt";}
      
      //======================================== X or Y Quantity for 1D Histos
      if( StandardHistoCode == "?" )
    {
      StandardHistoCode = BuildStandard1DHistoCodeXY(UserHistoCode);
    } 
    }
  
  //---------------------------------------------
  if( StandardHistoCode == "?" )
    {
      std::cout << "*TEcnaParHistos::BuildStandard1DHistoCodeX(...)> UserHistoCode = " << UserHistoCode
       << " : code not found."
       << fTTBELL << std::endl;

      ListOfStandardCodes("1DHistoCodeX");
    }
  return StandardHistoCode;
}

TString TEcnaParHistos::BuildStandard1DHistoCodeXY

(

const TString &

UserHistoCode

)

Definition at line 2634 of file TEcnaParHistos.cc.

References gather_cfg::cout, fTTBELL, and ListOfStandardCodes().

Referenced by BuildStandard1DHistoCodeX(), and BuildStandard1DHistoCodeY().

{
  //........................... user code -> standard code
  TString StandardHistoCode = "?";

  //======================================== X or Y Quantity for 1D Histos
  if( UserHistoCode == "Number of events" || UserHistoCode == "Nb of evts" || 
      UserHistoCode == "NumberbOfEvents"  || UserHistoCode == "NbOfEvts"   ||
      UserHistoCode == "number of events" ||
      UserHistoCode == "noe"              || UserHistoCode == "NOE" || 
      UserHistoCode == " " || UserHistoCode == "" ) // (default)
    {StandardHistoCode = "NOE";}
 
  if( UserHistoCode == "Pedestals" || UserHistoCode == "Pedestal" ||
      UserHistoCode == "pedestals" || UserHistoCode == "pedestal" ||
      UserHistoCode == "ped"       || UserHistoCode == "Ped" )
    {StandardHistoCode = "Ped";}

  if( UserHistoCode == "Total noise" || UserHistoCode == "TotalNoise" ||
      UserHistoCode == "total noise" || UserHistoCode == "TN" ||
      UserHistoCode == "tn"          || UserHistoCode == "TNo" )
    {StandardHistoCode = "TNo";}

  if( UserHistoCode == "Low frequency noise" || UserHistoCode == "LowFrequencyNoise" ||
      UserHistoCode == "LF noise"            || UserHistoCode == "LFNoise" || 
      UserHistoCode == "low frequency noise" || UserHistoCode == "lfn" ||
      UserHistoCode == "LFN")
    {StandardHistoCode = "LFN";}

  if( UserHistoCode == "High frequency noise" || UserHistoCode == "HighFrequencyNoise" ||
      UserHistoCode == "HF noise"             || UserHistoCode == "HFNoise" || 
      UserHistoCode == "high frequency noise" ||
      UserHistoCode == "hfn" || UserHistoCode == "HFN")
    {StandardHistoCode = "HFN";}

  if( UserHistoCode == "Mean correlations between samples" ||  
      UserHistoCode == "MeanCorrelationsBetweenSamples" || 
      UserHistoCode == "Correlations between samples" ||  
      UserHistoCode == "CorrelationsBetweenSamples" || 
      UserHistoCode == "Mean corss" || UserHistoCode == "MeanCorss" ||   
      UserHistoCode == "Corss" || UserHistoCode == "corss" ||   
      UserHistoCode == "Css"   || UserHistoCode == "css" ||
      UserHistoCode == "mean correlations between samples" ||
      UserHistoCode == "mcs" || UserHistoCode == "MCs" )
    {StandardHistoCode = "MCs";}

  if( UserHistoCode == "Sigma of correlations between samples" ||  
      UserHistoCode == "SigmaOfCorrelationsBetweenSamples" || 
      UserHistoCode == "Sigma corss" || UserHistoCode == "SigmaCorss" ||   
      UserHistoCode == "SigCorss" || UserHistoCode == "sigcorss" ||   
      UserHistoCode == "SCss"   || UserHistoCode == "scss" ||
      UserHistoCode == "sigma of correlations between samples" ||
      UserHistoCode == "scs" || UserHistoCode == "SCs")
    {StandardHistoCode = "SCs";}

  if( UserHistoCode == "Sample mean" || UserHistoCode == "SampleMean" ||
      UserHistoCode == "Sample average" || UserHistoCode == "SampleAverage" || 
      UserHistoCode == "SampMean" || UserHistoCode == "SampAverage" ||
      UserHistoCode == "MSp" )
    {StandardHistoCode = "MSp";}

  if( UserHistoCode == "Sample sigma"      || UserHistoCode == "SampleSigma" ||
      UserHistoCode == "Sigma of samples"  || UserHistoCode == "SigmaOfSamples" ||
      UserHistoCode == "SampSigma"         || 
      UserHistoCode == "SSp"      )
    {StandardHistoCode = "SSp";}

  if( UserHistoCode == "date" || UserHistoCode == "Date" || UserHistoCode == "time" ||
      UserHistoCode == "Time" )
    {StandardHistoCode = "Time";}

  if( UserHistoCode == "ADC value" || UserHistoCode == "ADCValue" || 
      UserHistoCode == "Adc value" || UserHistoCode == "AdcValue" ||
      UserHistoCode == "Sample ADC" || UserHistoCode == "SampleAdc" || 
      UserHistoCode == "ADC" || UserHistoCode == "Adc"  )
    {StandardHistoCode = "Adc";}

  //---------------------------------------------
  if( StandardHistoCode == "?" )
    {
      std::cout << "*TEcnaParHistos::BuildStandard1DHistoCodeXY(...)> UserHistoCode = " << UserHistoCode
       << " : code not found."
       << fTTBELL << std::endl;

      ListOfStandardCodes("1DHistoCodeXY");
    }
  return StandardHistoCode;
}

TString TEcnaParHistos::BuildStandard1DHistoCodeY	(	const TString &	CallingMethod,
		const TString &	UserHistoCode
	)

Definition at line 2590 of file TEcnaParHistos.cc.

References BuildStandard1DHistoCodeXY(), gather_cfg::cout, fTTBELL, and ListOfStandardCodes().

Referenced by TEcnaHistos::Plot1DHisto(), TEcnaHistos::PlotDetector(), TEcnaHistos::PlotHistory(), and TEcnaRead::Read1DHisto().

{
  //........................... user code -> standard code
  TString StandardHistoCode = "?";

  if( CallingMethod == "1D" || CallingMethod == "2DS" || CallingMethod == "Time" )
    {
      //======================================== Only Y Quantity for 1D Histos
      if( UserHistoCode == "Number of crystals" || UserHistoCode == "NumberOfCrystals" ||
      UserHistoCode == "Nb of crystals" || UserHistoCode == "NbOfCrystals" ||
      UserHistoCode == "Number of xtals" || UserHistoCode == "NumberOfXtals" ||
      UserHistoCode == "Nb of xtals" || UserHistoCode == "NbOfXtals" ||
      UserHistoCode == "nox" || UserHistoCode == "NOX" )
    {StandardHistoCode = "NOX";}

      if( UserHistoCode == "Number of samples" || UserHistoCode == "NumberOfSamples" ||
      UserHistoCode == "Nb of samples" || UserHistoCode == "NbOfSamples" ||
      UserHistoCode == "nos" || UserHistoCode == "NOS" )
    {StandardHistoCode = "NOS";}

      if( UserHistoCode == "Number of runs" || UserHistoCode == "NumberOfRuns" ||
      UserHistoCode == "Nb of runs" || UserHistoCode == "NbOfRuns" ||
      UserHistoCode == "nor" || UserHistoCode == "NOR" )
    {StandardHistoCode = "NOR";}
      
      //======================================== X or Y Quantity for 1D Histos
      if( StandardHistoCode == "?" )
    {
      StandardHistoCode = BuildStandard1DHistoCodeXY(UserHistoCode);
    }
    }
  //---------------------------------------------
  if( StandardHistoCode == "?" )
    {
      std::cout << "*TEcnaParHistos::BuildStandard1DHistoCodeY(...)> UserHistoCode = " << UserHistoCode
       << " : code not found."
       << fTTBELL << std::endl;

      ListOfStandardCodes("1DHistoCodeY");
    }
  return StandardHistoCode;
}

TString TEcnaParHistos::BuildStandardBetweenWhatCode	(	const TString &	CallingMethod,
		const TString &	UserHistoCode
	)

Definition at line 2757 of file TEcnaParHistos.cc.

References gather_cfg::cout, fTTBELL, and ListOfStandardCodes().

Referenced by TEcnaHistos::PlotMatrix(), and TEcnaRead::ReadMatrix().

{
  //........................... user code -> standard code
  TString StandardHistoCode = "?";
  if( CallingMethod == "2D" )
    {
      //======================================== Quantity for correlations (BetweenWhat)
      if( UserHistoCode == "Samples" || UserHistoCode == "Between samples" || 
      UserHistoCode == "samples" || UserHistoCode == "between samples" ||
      UserHistoCode == "BetweenSamples" ||
      UserHistoCode == "Samp" || UserHistoCode == "samp" ||
      UserHistoCode == "ss" || UserHistoCode == "Mss" )
    {StandardHistoCode = "Mss";}

      if( UserHistoCode == "LF channels" || UserHistoCode == "LF between channels" ||
      UserHistoCode == "LFChannels"  || UserHistoCode == "LFBetweenChannels" ||
      UserHistoCode == "LFChan"      || UserHistoCode == "lfchan" || 
      UserHistoCode == "LFcc"        || UserHistoCode == "lfcc"   || UserHistoCode == "MccLF" )
    {StandardHistoCode = "MccLF";}

      if( UserHistoCode == "HF channels" || UserHistoCode == "HF between channels" ||
      UserHistoCode == "HFChannels"  || UserHistoCode == "HFBetweenChannels" ||
      UserHistoCode == "HFChan"      || UserHistoCode == "hfchan" || 
      UserHistoCode == "HFcc"        || UserHistoCode == "hfcc"   || UserHistoCode == "MccHF" )
    {StandardHistoCode = "MccHF";}

      if( UserHistoCode == "LF towers"    || UserHistoCode == "LF between towers" ||
      UserHistoCode == "LFTowers"     || UserHistoCode == "LFBetweenTowers" ||
      UserHistoCode == "LFTow"        || UserHistoCode == "lftow" ||
      UserHistoCode == "LFtt"         || UserHistoCode == "lftt"  ||
      UserHistoCode == "LF SCs"       || UserHistoCode == "LF between SCs" ||
      UserHistoCode == "LFSCs"        || UserHistoCode == "LFBetweenSCs" ||
      UserHistoCode == "LFSuperXtals" || UserHistoCode == "lfsc" ||
      UserHistoCode == "LFSC"         || UserHistoCode == "lfsx" ||
      UserHistoCode == "MttLF" )
    {StandardHistoCode = "MttLF";}

      if( UserHistoCode == "HF towers"    || UserHistoCode == "HF between towers" ||
      UserHistoCode == "HFTowers"     || UserHistoCode == "HFBetweenTowers" ||
      UserHistoCode == "HFTow"        || UserHistoCode == "hftow" || 
      UserHistoCode == "HFtt"         || UserHistoCode == "hftt"  ||
      UserHistoCode == "HF SCs"       || UserHistoCode == "HF between SCs" ||
      UserHistoCode == "HFSCs"        || UserHistoCode == "HFBetweenSCs" ||
      UserHistoCode == "HFSuperXtals" || UserHistoCode == "hfsc" ||
      UserHistoCode == "HFSC"         || UserHistoCode == "hfsx" ||
      UserHistoCode == "MttHF" )
    {StandardHistoCode = "MttHF";}
    }

  //---------------------------------------------
  if( StandardHistoCode == "?" )
    {
      std::cout << "*TEcnaParHistos::BuildStandardBetweenWhatCode(...)> UserHistoCode = " << UserHistoCode
       << " : code not found."
       << fTTBELL << std::endl;

      ListOfStandardCodes("BetweenWhatCode");
    }
  return StandardHistoCode;
}

TString TEcnaParHistos::BuildStandardCovOrCorCode	(	const TString &	CallingMethod,
		const TString &	UserHistoCode
	)

Definition at line 2724 of file TEcnaParHistos.cc.

References gather_cfg::cout, fTTBELL, and ListOfStandardCodes().

Referenced by TEcnaHistos::PlotMatrix(), and TEcnaRead::ReadMatrix().

{
  //........................... user code -> standard code
  TString StandardHistoCode = "?";
  if( CallingMethod == "2D" )
    {
      //======================================== Correlation or covariance (CorOrCov)
      if( UserHistoCode == "Correlation" || UserHistoCode == "Correlations" ||
      UserHistoCode == "correlation" || UserHistoCode == "correlations" ||
      UserHistoCode == "Correl"      || UserHistoCode == "correl" ||
      UserHistoCode == "cor"         || UserHistoCode == "Cor"  || 
      UserHistoCode == " " || UserHistoCode == "" ) // (default)
    {StandardHistoCode = "Cor";}

      if( UserHistoCode == "Covariance" || UserHistoCode == "Covariances" ||
      UserHistoCode == "covariance" || UserHistoCode == "covariances" ||
      UserHistoCode == "Covar"      || UserHistoCode == "covar" ||
      UserHistoCode == "cov"        || UserHistoCode == "Cov" )
    {StandardHistoCode = "Cov";}
    }
  //---------------------------------------------
  if( StandardHistoCode == "?" )
    {
      std::cout << "*TEcnaParHistos::BuildStandardCovOrCorCode(...)> UserHistoCode = " << UserHistoCode
       << " : code not found."
       << fTTBELL << std::endl;

      ListOfStandardCodes("CovOrCorCode");
    }
  return StandardHistoCode;
}

TString TEcnaParHistos::BuildStandardDetectorCode

(

const TString &

UserDetector

)

Definition at line 2421 of file TEcnaParHistos.cc.

References gather_cfg::cout, fTTBELL, and ListOfStandardCodes().

Referenced by TEcnaHistos::Plot1DHisto(), TEcnaHistos::PlotDetector(), and TEcnaRead::Read1DHisto().

{
  TString StandardDetectorCode = "?";

  if( UserDetector == "Super-module" || UserDetector == "SuperModule" ||
      UserDetector == "super-module" || UserDetector == "SM" ||
      UserDetector == " " || UserDetector == "" )  // (default)
    {StandardDetectorCode = "SM";}

   if( UserDetector == "DEE" || UserDetector == "Dee" )
    {StandardDetectorCode = "Dee";}

   if( UserDetector == "Ecal barrel" || UserDetector == "EcalBarrel" || 
       UserDetector == "ecal barrel" || UserDetector == "Barrel"     || UserDetector == "barrel" || 
       UserDetector == "EB" )
    {StandardDetectorCode = "EB";}

   if( UserDetector == "Ecal endcap" || UserDetector == "EcalEndcap" || 
       UserDetector == "ecal endcap" || UserDetector == "Endcap"     || UserDetector == "endcap" || 
       UserDetector == "EE" )
    {StandardDetectorCode = "EE";}

   if( StandardDetectorCode == "?" )
    {
      std::cout << "*TEcnaParHistos::BuildStandardDetectorCode(...)> UserDetector = " << UserDetector
       << " : code not found."
       << fTTBELL << std::endl;

      ListOfStandardCodes("DetectorCode");
    }
  return StandardDetectorCode;
}

TString TEcnaParHistos::BuildStandardPlotOption	(	const TString &	CallingMethod,
		const TString &	UserPlotOption
	)

Definition at line 2455 of file TEcnaParHistos.cc.

References gather_cfg::cout, fAllXtalsInStinPlot, fOnlyOnePlot, fSameOnePlot, fSeveralPlot, fTTBELL, and ListOfStandardCodes().

Referenced by TEcnaHistos::Plot1DHisto(), TEcnaHistos::PlotHistory(), and TEcnaHistos::PlotMatrix().

{
  TString StandardPlotOption = "?";

  if( CallingMethod == "1D" || CallingMethod == "2DS" || CallingMethod == "Time" )
    {
      if( UserPlotOption == "ONLY ONE" || UserPlotOption == "only one"   || UserPlotOption == "onlyone" ||
      UserPlotOption == "Only one" || UserPlotOption == "OnlyOne"    ||
      UserPlotOption == "ONLYONE"  || UserPlotOption == fOnlyOnePlot ||
      UserPlotOption == " " || UserPlotOption ==  "" )  // (default)
    {StandardPlotOption = fOnlyOnePlot;}

      if( UserPlotOption == "SAME" || UserPlotOption ==  "Same" || UserPlotOption == fSeveralPlot )
    {StandardPlotOption = fSeveralPlot;}

      if( UserPlotOption ==  "SAME n" || UserPlotOption ==  "Same n" || UserPlotOption == fSameOnePlot )
    {StandardPlotOption = fSameOnePlot;}

      if( UserPlotOption == fAllXtalsInStinPlot )  // called with 1D after call with 1DX (special case "SAME in Stin")
    {StandardPlotOption = fAllXtalsInStinPlot;}
    }

  if( CallingMethod == "1DX" )
    {
      if( UserPlotOption == "ALL XTALS IN TOWER" || UserPlotOption == "ALL CHANNELS IN TOWER" ||
      UserPlotOption == "AllXtalsInTower"    || UserPlotOption == "AllChannelsInTower" ||
      UserPlotOption == "ALL XTALS IN TOW"   || UserPlotOption == "ALL CHANNELS IN TOW" ||
      UserPlotOption == "AllXtalsInTow"      || UserPlotOption == "AllChannelsInTow" ||
      UserPlotOption == "ALL XTALS IN SC"    || UserPlotOption == "ALL CHANNELS IN SC" ||
      UserPlotOption == "AllXtalsInSC"       || UserPlotOption == "AllChannelsInSC" ||
      UserPlotOption == "SAME IN TOWER"      || UserPlotOption == "SameInTower" || 
      UserPlotOption == "SAME IN TOW"        || UserPlotOption == "SameInTow" || 
      UserPlotOption == "SAME IN SC"         || UserPlotOption == "SameInSC"  ||
      UserPlotOption == "Same in tower"      || UserPlotOption == "Same in tow" ||
      UserPlotOption == "Same in SC"         || UserPlotOption == "SameInSC" ||
      UserPlotOption == fAllXtalsInStinPlot  ||
      UserPlotOption == " " || UserPlotOption == "" ) // (default)
    {StandardPlotOption = fAllXtalsInStinPlot;}
    }

  if( CallingMethod == "2D" )
    {
      if( UserPlotOption == "COLZ" ||
      UserPlotOption == " " || UserPlotOption == "" ) // (default)
    {StandardPlotOption = "COLZ";}
      if( UserPlotOption == "BOX"    ){StandardPlotOption = "BOX";}
      if( UserPlotOption == "TEXT"   ){StandardPlotOption = "TEXT";}
      if( UserPlotOption == "CONTZ"  ){StandardPlotOption = "CONTZ";}
      if( UserPlotOption == "LEGO2Z" ){StandardPlotOption = "LEGO2Z";}
      if( UserPlotOption == "SURF1Z" ){StandardPlotOption = "SURF1Z";}
      if( UserPlotOption == "SURF2Z" ){StandardPlotOption = "SURF2Z";}
      if( UserPlotOption == "SURF3Z" ){StandardPlotOption = "SURF3Z";}
      if( UserPlotOption == "SURF4"  ){StandardPlotOption = "SURF4";}
      if( UserPlotOption == "ASCII"  ){StandardPlotOption = "ASCII";}
    }

  //...................................................
  if( StandardPlotOption == "?" )
    {
      std::cout << "*TEcnaParHistos::BuildStandardPlotOption(...)> UserPlotOption = " << UserPlotOption
       << " : code not found."
       << fTTBELL << std::endl;

      ListOfStandardCodes("PlotOption");
    }
  return StandardPlotOption;
}

UInt_t TEcnaParHistos::CanvasFormatH

(

const TString &

chformat

)

Definition at line 302 of file TEcnaParHistos.cc.

Referenced by TEcnaHistos::DeeSCNumbering(), TEcnaHistos::SCCrystalNumbering(), SetCanvasHeight(), SetCanvasWidth(), TEcnaHistos::SMTowerNumbering(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::TowerCrystalNumbering(), TEcnaHistos::ViewMatrix(), TEcnaHistos::ViewStas(), TEcnaHistos::ViewStex(), and TEcnaHistos::ViewStin().

{
//Set Canvas height

  UInt_t canv_h = 530;         // default = "petit"

  if ( chformat == "petit"    ){canv_h = 530;} // 21x29.7 portrait
  if ( chformat == "moyen"    ){canv_h = 636;} // 21x29.7 portrait
  if ( chformat == "grand"    ){canv_h = 810;} // 21x29.7 portrait

  if ( chformat == "etaphiSM" ){canv_h = 306;} // landscape etroit en hauteur pour plot SM
  if ( chformat == "phietaEB" ){canv_h = 450;} // landscape pour plot EB (32 SMs)

  if ( chformat == "IXIYDee"  ){canv_h = 720;} // portrait etroit en largeur pour plot Dee
  if ( chformat == "IYIXEE"   ){canv_h = 450;} // landscape pour plot EE (4 dees)
  return canv_h;
}

UInt_t TEcnaParHistos::CanvasFormatW

(

const TString &

chformat

)

Definition at line 284 of file TEcnaParHistos.cc.

Referenced by TEcnaHistos::DeeSCNumbering(), TEcnaHistos::SCCrystalNumbering(), SetCanvasHeight(), SetCanvasWidth(), TEcnaHistos::SMTowerNumbering(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::TowerCrystalNumbering(), TEcnaHistos::ViewMatrix(), TEcnaHistos::ViewStas(), TEcnaHistos::ViewStex(), and TEcnaHistos::ViewStin().

{
//Set Canvas width

  UInt_t canv_w = 375;         // default = "petit"

  if ( chformat == "petit"    ){canv_w = 375;} // 21x29.7 portrait
  if ( chformat == "moyen"    ){canv_w = 450;} // 21x29.7 portrait
  if ( chformat == "grand"    ){canv_w = 572;} // 21x29.7 portrait

  if ( chformat == "etaphiSM" ){canv_w = 760;} // landscape etroit en hauteur pour plot SM
  if ( chformat == "phietaEB" ){canv_w = 636;} // landscape pour plot EB (32 SMs)

  if ( chformat == "IXIYDee"  ){canv_w = 320;} // portrait etroit en largeur pour plot Dee
  if ( chformat == "IYIXEE"   ){canv_w = 636;} // landscape pour plot EE (4 dees)
  return canv_w;
}

Color_t TEcnaParHistos::ColorDefinition

(

const TString &

chcolor

)

Definition at line 506 of file TEcnaParHistos.cc.

Referenced by ColorTab(), TEcnaHistos::EEDataSectors(), TEcnaHistos::GetSCColor(), TEcnaHistos::GetViewHistoColor(), TEcnaHistos::HistimePlot(), TEcnaHistos::HistoPlot(), TEcnaHistos::SCCrystalNumbering(), TEcnaHistos::SetAllPavesViewHisto(), TEcnaHistos::SetAllPavesViewStas(), TEcnaHistos::SetAllPavesViewStex(), SetColorsForNumbers(), SetPaveLVRB(), TEcnaHistos::SetViewGraphColors(), TEcnaHistos::SetViewHistoColors(), TEcnaHistos::ViewDeeSCNumberingPad(), TEcnaHistos::ViewEBGrid(), TEcnaHistos::ViewSMGrid(), and TEcnaHistos::ViewSMTowerNumberingPad().

{
  //Set color from color name

  //=========> Color definition: see ROOT User's guide p.151

  Color_t couleur = 1;        // default = "noir"

  if ( chcolor == "noir"       ) {couleur =  1;}
  if ( chcolor == "rouge"      ) {couleur =  2;}
  if ( chcolor == "vert_fonce" ) {couleur =  3;}
  if ( chcolor == "bleu_fonce" ) {couleur =  4;}
  if ( chcolor == "jaune"      ) {couleur =  5;}
  if ( chcolor == "rose"       ) {couleur =  6;}
  if ( chcolor == "bleu_clair" ) {couleur =  7;}
  if ( chcolor == "vert"       ) {couleur =  8;}
  if ( chcolor == "bleu"       ) {couleur =  9;}
  if ( chcolor == "blanc"      ) {couleur = 10;}

  if ( chcolor == "marron23"   ) {couleur = 23;}
  if ( chcolor == "marron24"   ) {couleur = 24;}
  if ( chcolor == "marron25"   ) {couleur = 24;}
  if ( chcolor == "marron27"   ) {couleur = 27;}
  if ( chcolor == "marron28"   ) {couleur = 28;}

  if ( chcolor == "bleu33"     ) {couleur = 33;}
  if ( chcolor == "bleu36"     ) {couleur = 36;}
  if ( chcolor == "bleu38"     ) {couleur = 38;}
  if ( chcolor == "bleu39"     ) {couleur = 39;}

  if ( chcolor == "orange41"   ) {couleur = 41;}
  if ( chcolor == "orange42"   ) {couleur = 42;}

  if ( chcolor == "rouge44"    ) {couleur = 44;}
  if ( chcolor == "rouge46"    ) {couleur = 46;}
  if ( chcolor == "rouge47"    ) {couleur = 47;}
  if ( chcolor == "rouge48"    ) {couleur = 48;}
  if ( chcolor == "rouge49"    ) {couleur = 49;}
  if ( chcolor == "rouge50"    ) {couleur = 50;}

  if ( chcolor == "vert31"     ) {couleur = 31;}
  if ( chcolor == "vert32"     ) {couleur = 32;}
  if ( chcolor == "vert36"     ) {couleur = 36;}
  if ( chcolor == "vert37"     ) {couleur = 37;}

  if ( chcolor == "violet"     ) {couleur = 49;}

  if ( chcolor == "turquoise29") {couleur = 29;}

  if ( chcolor == "gris12"     ) {couleur = 12;}
  if ( chcolor == "gris13"     ) {couleur = 13;}
  if ( chcolor == "gris14"     ) {couleur = 14;}
  if ( chcolor == "gris15"     ) {couleur = 15;}
  if ( chcolor == "gris16"     ) {couleur = 16;}
  if ( chcolor == "gris17"     ) {couleur = 17;}
  if ( chcolor == "gris18"     ) {couleur = 18;}

  return couleur;
}

Color_t TEcnaParHistos::ColorTab

(

const Int_t &

user_color_number

)

Definition at line 467 of file TEcnaParHistos.cc.

References ColorDefinition(), and fMaxColorNumber.

Referenced by TEcnaHistos::GetViewHistoColor(), TEcnaHistos::SetViewGraphColors(), and TEcnaHistos::SetViewHistoColors().

{
  //Set color from user color number

  //=========> Color definition: see ROOT User's guide p.151

  TColor* my_color = new TColor();

  Color_t couleur = ColorDefinition("noir");        // default = "noir"

  if ( fMaxColorNumber  != 6 )
    {
      //................... Standard: 6 colors (fMaxColorNumber = 5)
      if(user_color_number == 0){couleur = ColorDefinition("noir");}                  //    noir        black    1
      if(user_color_number == 1){couleur = ColorDefinition("rouge");}                 //    rouge       red      2
      if(user_color_number == 2){couleur = ColorDefinition("bleu");}                  //    bleu        blue     9
      if(user_color_number == 3){couleur = (Color_t)my_color->GetColor("#009900");}   //    vert        green
      if(user_color_number == 4){couleur = ColorDefinition("marron28");}              //    marron 28   braun   28
      if(user_color_number == 5){couleur = (Color_t)my_color->GetColor("#9900BB");}   //    violet      purple

    }
  if ( fMaxColorNumber  == 6 )
    {
      //................... Rainbow:7  colors (fMaxColorNumber = 6)
      if(user_color_number == 0){couleur = (Color_t)my_color->GetColor("#EE0000");}  //   rouge
      if(user_color_number == 1){couleur = (Color_t)my_color->GetColor("#FF6611");}  //   orange
      if(user_color_number == 2){couleur = (Color_t)my_color->GetColor("#FFCC00");}  //   jaune
      if(user_color_number == 3){couleur = (Color_t)my_color->GetColor("#009900");}  //   vert
      if(user_color_number == 4){couleur = (Color_t)my_color->GetColor("#0044EE");}  //   bleu
      if(user_color_number == 5){couleur = (Color_t)my_color->GetColor("#6633BB");}  //   indigo
      if(user_color_number == 6){couleur = (Color_t)my_color->GetColor("#9900BB");}  //   violet
    }

  if( user_color_number < 0 || user_color_number > fMaxColorNumber ){couleur = 0;}

  return couleur;
}

Float_t TEcnaParHistos::DeeNameOffsetX

(

const Int_t &

DeeNumber

)

Definition at line 1126 of file TEcnaParHistos.cc.

References PFRecoTauDiscriminationByIsolation_cfi::offset.

Referenced by TEcnaHistos::EEDataSectors().

{
  Float_t offset = 0;

  if( DeeNumber == 1 ){offset = 8.;}
  if( DeeNumber == 2 ){offset = 0.;}
  if( DeeNumber == 3 ){offset = 7.6;}
  if( DeeNumber == 4 ){offset = -0.5;}
  
  return offset;
}

Float_t TEcnaParHistos::DeeNumberOffsetX	(	const TString &	opt_plot,
		const Int_t &	DeeNumber
	)

Definition at line 1138 of file TEcnaParHistos.cc.

References PFRecoTauDiscriminationByIsolation_cfi::offset.

Referenced by TEcnaHistos::EEDataSectors().

{
  Float_t offset = 0;

  if( opt_plot == "Dee"  )
    {
      if( DeeNumber == 1 ){offset = 2.5;}
      if( DeeNumber == 2 ){offset = 41.5;}
      if( DeeNumber == 3 ){offset = 2.5;}
      if( DeeNumber == 4 ){offset = 41.5;}
    }
  if( opt_plot == "EE"  )
    {
      if( DeeNumber == 1 ){offset = 0.42;}
      if( DeeNumber == 2 ){offset = 8.15;}
      if( DeeNumber == 3 ){offset = 0.42;}
      if( DeeNumber == 4 ){offset = 8.15;}
    }
  return offset;
}

Float_t TEcnaParHistos::DeeOffsetX	(	const TString &	opt_plot,
		const Int_t &	DeeNumber
	)

Definition at line 1109 of file TEcnaParHistos.cc.

References fEcal, TEcnaParEcal::MaxStinHocoInStex(), and PFRecoTauDiscriminationByIsolation_cfi::offset.

Referenced by TEcnaHistos::EEDataSectors(), TEcnaHistos::EEGridAxis(), and TEcnaHistos::GetXStinInStas().

{
  Float_t offset = 0;
  if( opt_plot == "Dee" ){offset = 0;}
  if( opt_plot == "EE"  )
    {
      Double_t vertic_empty_strip_1 = 1.;
      if( DeeNumber == 1 ){offset = vertic_empty_strip_1
                 + fEcal->MaxStinHocoInStex()+ 2*fEcal->MaxStinHocoInStex() + 1.;}
      if( DeeNumber == 2 ){offset = vertic_empty_strip_1 + 2*fEcal->MaxStinHocoInStex() + 1.;}
      if( DeeNumber == 3 ){offset = vertic_empty_strip_1 + fEcal->MaxStinHocoInStex();}
      if( DeeNumber == 4 ){offset = vertic_empty_strip_1 + 0.;}
    }
  return offset;
}

TString TEcnaParHistos::GetCodeAllXtalsInStinPlot

(

)

Definition at line 2998 of file TEcnaParHistos.cc.

References fAllXtalsInStinPlot.

Referenced by TEcnaHistos::SetEcalSubDetector().

{return fAllXtalsInStinPlot;}

TString TEcnaParHistos::GetCodeOnlyOnePlot

(

)

Definition at line 2995 of file TEcnaParHistos.cc.

References fOnlyOnePlot.

Referenced by TEcnaHistos::SetEcalSubDetector().

{return fOnlyOnePlot;}

Int_t TEcnaParHistos::GetCodePlotAllXtalsInStin

(

)

Definition at line 2999 of file TEcnaParHistos.cc.

References fPlotAllXtalsInStin.

Referenced by TEcnaHistos::SetEcalSubDetector().

{return fPlotAllXtalsInStin;}

TString TEcnaParHistos::GetCodeSameOnePlot

(

)

Definition at line 2997 of file TEcnaParHistos.cc.

References fSameOnePlot.

Referenced by TEcnaHistos::SetEcalSubDetector().

{return fSameOnePlot;}

TString TEcnaParHistos::GetCodeSeveralPlot

(

)

Definition at line 2996 of file TEcnaParHistos.cc.

References fSeveralPlot.

Referenced by TEcnaHistos::SetEcalSubDetector().

{return fSeveralPlot;}

TString TEcnaParHistos::GetHistoType

(

const TString &

HistoCode

)

Definition at line 2082 of file TEcnaParHistos.cc.

References fgMaxCar.

Referenced by TEcnaHistos::GetHistoNumberOfBins(), TEcnaHistos::GetOkViewHisto(), GetXVarHisto(), GetYVarHisto(), TEcnaHistos::SetAllPavesViewHisto(), TEcnaHistos::SetCanvasName(), TEcnaHistos::SetViewHistoColors(), TEcnaHistos::ViewHistime(), and TEcnaHistos::ViewHisto().

{
// Type of the quantity as a function of the quantity code
// Histo type <=> Variable in X coordinate

  TString HistoType;
  Int_t MaxCar = fgMaxCar;
  HistoType.Resize(MaxCar);
  HistoType = "(no quantity type info)";

  //.(1a)............................ Global
  if ( HistoCode == "D_NOE_ChNb" || HistoCode == "D_Ped_ChNb" ||
       HistoCode == "D_TNo_ChNb" || HistoCode == "D_LFN_ChNb" || HistoCode == "D_HFN_ChNb" ||
       HistoCode == "D_MCs_ChNb" || HistoCode == "D_SCs_ChNb" )
    {HistoType = "Global";}   // X coordinate = Xtals for SM or Dee
                              //                Tower for EB
                              //                SC    for EE
  //.(1b)............................ Proj  
  if ( HistoCode == "D_NOE_ChDs" || HistoCode == "D_Ped_ChDs" ||
       HistoCode == "D_TNo_ChDs" || HistoCode == "D_LFN_ChDs" || HistoCode == "D_HFN_ChDs" || 
       HistoCode == "D_MCs_ChDs" || HistoCode == "D_SCs_ChDs" )
    {HistoType = "Proj";}    // X coordinate = bin number
  
  //.(2)............................ H1Basic
  if ( HistoCode == "D_MSp_SpNb" || HistoCode == "D_SSp_SpNb" )
    {HistoType = "H1Basic";}  // X coordinate = sample number

  //.(2)............................ H1BasicProj
  if ( HistoCode == "D_MSp_SpDs" || HistoCode == "D_SSp_SpDs" )
    {HistoType = "H1BasicProj";}  // X coordinate = total noise

  //.(3a)............................ SampGlobal
  if ( HistoCode == "D_Adc_EvNb" ){HistoType = "SampGlobal";}  // X coordinate = event number
  //.(3b)............................ SampProj
  if ( HistoCode == "D_Adc_EvDs"  ){HistoType = "SampProj";}    // X coordinate = bin number

  //.(4a)............................ Evol
  if ( HistoCode == "H_Ped_Date" || HistoCode == "H_TNo_Date" || HistoCode == "H_MCs_Date" ||
       HistoCode == "H_LFN_Date" || HistoCode == "H_HFN_Date" || HistoCode == "H_SCs_Date" )
    {HistoType = "Evol";}   // X coordinate = date

  //.(4b)............................ EvolProj
  if ( HistoCode == "H_Ped_RuDs" || HistoCode == "H_TNo_RuDs" || HistoCode == "H_MCs_RuDs" ||
       HistoCode == "H_LFN_RuDs" || HistoCode == "H_HFN_RuDs" || HistoCode == "H_SCs_RuDs" )
    {HistoType = "EvolProj";}   // X coordinate = bin number

  return HistoType;
}// end of GetHistoType(...)

Double_t TEcnaParHistos::GetMarginAutoMinMax

(

)

Definition at line 572 of file TEcnaParHistos.cc.

References fMarginAutoMinMax.

Referenced by TEcnaHistos::HistimePlot(), TEcnaHistos::ViewHistime(), and TEcnaHistos::ViewHisto().

{return fMarginAutoMinMax;}

Int_t TEcnaParHistos::GetMaxNbOfColors

(

)

Definition at line 570 of file TEcnaParHistos.cc.

References fMaxColorNumber.

Referenced by TEcnaHistos::SetViewGraphColors(), and TEcnaHistos::SetViewHistoColors().

{return fMaxColorNumber;}

Int_t TEcnaParHistos::GetNbOfRunsDisplayed

(

)

Definition at line 571 of file TEcnaParHistos.cc.

References fNbOfRunsDisplayed.

Referenced by TEcnaHistos::HistimePlot().

{return fNbOfRunsDisplayed;}

TString TEcnaParHistos::GetQuantityName

(

const TString &

chqcode

)

Definition at line 2224 of file TEcnaParHistos.cc.

References fgMaxCar.

Referenced by TEcnaHistos::HistimePlot(), TEcnaHistos::HistoPlot(), TEcnaHistos::ViewHistime(), and TEcnaHistos::ViewHisto().

{
// Name of the quantity as a function of the histo code

  TString chqname;
  Int_t MaxCar = fgMaxCar;
  chqname.Resize(MaxCar);
  chqname = "(no quantity name info)";

  if(chqcode == "D_NOE_ChNb"){chqname = "Number of events";}
  if(chqcode == "D_NOE_ChDs"){chqname = "Nb of events";}
  if(chqcode == "D_Ped_ChNb"){chqname = "Pedestal";}
  if(chqcode == "D_Ped_ChDs"){chqname = "Pedestal";}
  if(chqcode == "D_TNo_ChNb"){chqname = "Total Noise";}
  if(chqcode == "D_TNo_ChDs"){chqname = "Total Noise";}
  if(chqcode == "D_MCs_ChNb"){chqname = "Mean Cor(s,s')";}
  if(chqcode == "D_MCs_ChDs"){chqname = "Mean Cor(s,s')";}
  if(chqcode == "D_LFN_ChNb"){chqname = "Low Freq. Noise";}
  if(chqcode == "D_LFN_ChDs"){chqname = "Low Freq. Noise";}
  if(chqcode == "D_HFN_ChNb"){chqname = "High Freq. Noise";}
  if(chqcode == "D_HFN_ChDs"){chqname = "High Freq. Noise";}
  if(chqcode == "D_SCs_ChNb"){chqname = "Sigma Cor(s,s')";}
  if(chqcode == "D_SCs_ChDs"){chqname = "Sigma Cor(s,s')";}
  if(chqcode == "D_MSp_SpNb"){chqname = "Sample means";}
  if(chqcode == "D_MSp_SpDs"){chqname = "Sample means";}
  if(chqcode == "D_SSp_SpNb"){chqname = "Sample sigmas";}
  if(chqcode == "D_SSp_SpDs"){chqname = "Sample sigmas";}
  if(chqcode == "D_Adc_EvNb"){chqname = "Sample ADC";}
  if(chqcode == "D_Adc_EvDs"){chqname = "Sample ADC distribution";}
  if(chqcode == "H_Ped_Date"){chqname = "Pedestal";}
  if(chqcode == "H_TNo_Date"){chqname = "Total Noise";}
  if(chqcode == "H_MCs_Date"){chqname = "Mean Cor(s,s')";}
  if(chqcode == "H_LFN_Date"){chqname = "Low Freq. Noise";}
  if(chqcode == "H_HFN_Date"){chqname = "High Freq. Noise";}
  if(chqcode == "H_SCs_Date"){chqname = "Sigma Cor(s,s')";}
  if(chqcode == "H_Ped_RuDs"){chqname = "Pedestal";}
  if(chqcode == "H_TNo_RuDs"){chqname = "Total Noise";}
  if(chqcode == "H_MCs_RuDs"){chqname = "Mean Cor(s,s')";}
  if(chqcode == "H_LFN_RuDs"){chqname = "Low Freq. Noise";}
  if(chqcode == "H_HFN_RuDs"){chqname = "High Freq. Noise";}
  if(chqcode == "H_SCs_RuDs"){chqname = "Sigma Cor(s,s')";}
  return chqname;
}

TString TEcnaParHistos::GetTechHistoCode

(

const TString &

StandardHistoCode

)

Definition at line 2917 of file TEcnaParHistos.cc.

References gather_cfg::cout, and fTTBELL.

Referenced by TEcnaHistos::Plot1DHisto(), TEcnaHistos::PlotDetector(), and TEcnaHistos::PlotHistory().

{
  TString TechHistoCode = "?";

  //.................... standard code -> technical code for ViewMatrix, ViewStex, ViewStas
  if( StandardHistoCode == "NOE" ){TechHistoCode = "D_NOE_ChNb";}
  if( StandardHistoCode == "Ped" ){TechHistoCode = "D_Ped_ChNb";}
  if( StandardHistoCode == "TNo" ){TechHistoCode = "D_TNo_ChNb";}
  if( StandardHistoCode == "LFN" ){TechHistoCode = "D_LFN_ChNb";}
  if( StandardHistoCode == "HFN" ){TechHistoCode = "D_HFN_ChNb";}
  if( StandardHistoCode == "MCs" ){TechHistoCode = "D_MCs_ChNb";}
  if( StandardHistoCode == "SCs" ){TechHistoCode = "D_SCs_ChNb";}

  if( TechHistoCode == "?" )
    {
      std::cout << "*TEcnaParHistos::GetTechHistoCode(...)> StandardHistoCode = " << StandardHistoCode
       << " : code not found " << fTTBELL << std::endl;
    }
  return TechHistoCode;
}

TString TEcnaParHistos::GetTechHistoCode	(	const TString &	X_Quantity,
		const TString &	Y_Quantity
	)

Definition at line 2938 of file TEcnaParHistos.cc.

References gather_cfg::cout.

{
  //........................... (X,Y) standard codes -> technical code
  TString TechHistoCode = "?";

  //........................... Matrix or Histo type
  if ( X_Quantity == "XtalORStin" && Y_Quantity == "NOE" ){TechHistoCode = "D_NOE_ChNb";}
  if ( X_Quantity == "XtalORStin" && Y_Quantity == "Ped" ){TechHistoCode = "D_Ped_ChNb";}
  if ( X_Quantity == "XtalORStin" && Y_Quantity == "TNo" ){TechHistoCode = "D_TNo_ChNb";}
  if ( X_Quantity == "XtalORStin" && Y_Quantity == "LFN" ){TechHistoCode = "D_LFN_ChNb";}
  if ( X_Quantity == "XtalORStin" && Y_Quantity == "HFN" ){TechHistoCode = "D_HFN_ChNb";}
  if ( X_Quantity == "XtalORStin" && Y_Quantity == "MCs" ){TechHistoCode = "D_MCs_ChNb";}
  if ( X_Quantity == "XtalORStin" && Y_Quantity == "SCs" ){TechHistoCode = "D_SCs_ChNb";}

  if ( X_Quantity == "NOE" && Y_Quantity == "NOX" ){TechHistoCode = "D_NOE_ChDs";}
  if ( X_Quantity == "Ped" && Y_Quantity == "NOX" ){TechHistoCode = "D_Ped_ChDs";}
  if ( X_Quantity == "TNo" && Y_Quantity == "NOX" ){TechHistoCode = "D_TNo_ChDs";}
  if ( X_Quantity == "LFN" && Y_Quantity == "NOX" ){TechHistoCode = "D_LFN_ChDs";}
  if ( X_Quantity == "HFN" && Y_Quantity == "NOX" ){TechHistoCode = "D_HFN_ChDs";}
  if ( X_Quantity == "MCs" && Y_Quantity == "NOX" ){TechHistoCode = "D_MCs_ChDs";}
  if ( X_Quantity == "SCs" && Y_Quantity == "NOX" ){TechHistoCode = "D_SCs_ChDs";}

  if ( X_Quantity == "Smp" && Y_Quantity == "MSp" ){TechHistoCode = "D_MSp_SpNb";}
  if ( X_Quantity == "MSp" && Y_Quantity == "NOS" ){TechHistoCode = "D_MSp_SpDs";}
  if ( X_Quantity == "Smp" && Y_Quantity == "SSp" ){TechHistoCode = "D_SSp_SpNb";}
  if ( X_Quantity == "SSp" && Y_Quantity == "NOS" ){TechHistoCode = "D_SSp_SpDs";}

  if ( X_Quantity == "Evt" && Y_Quantity == "Adc" ){TechHistoCode = "D_Adc_EvNb";}
  if ( X_Quantity == "Adc" && Y_Quantity == "NOE" ){TechHistoCode = "D_Adc_EvDs";}

  //................................ Histime type
  if( X_Quantity == "Time" && Y_Quantity == "Ped" ){TechHistoCode = "H_Ped_Date";}
  if( X_Quantity == "Ped"  && Y_Quantity == "NOR" ){TechHistoCode = "H_Ped_RuDs";}

  if( X_Quantity == "Time" && Y_Quantity == "TNo" ){TechHistoCode = "H_TNo_Date";}
  if( X_Quantity == "TNo"  && Y_Quantity == "NOR" ){TechHistoCode = "H_TNo_RuDs";}

  if( X_Quantity == "Time" && Y_Quantity == "LFN" ){TechHistoCode = "H_LFN_Date";}
  if( X_Quantity == "LFN"  && Y_Quantity == "NOR" ){TechHistoCode = "H_LFN_RuDs";}

  if( X_Quantity == "Time" && Y_Quantity == "HFN" ){TechHistoCode = "H_HFN_Date";}
  if( X_Quantity == "HFN"  && Y_Quantity == "NOR" ){TechHistoCode = "H_HFN_RuDs";}

  if( X_Quantity == "Time" && Y_Quantity == "MCs" ){TechHistoCode = "H_MCs_Date";}
  if( X_Quantity == "MCs"  && Y_Quantity == "NOR" ){TechHistoCode = "H_MCs_RuDs";}

  if( X_Quantity == "Time" && Y_Quantity == "SCs" ){TechHistoCode = "H_SCs_Date";}
  if( X_Quantity == "SCs"  && Y_Quantity == "NOR" ){TechHistoCode = "H_SCs_RuDs";}

  if( TechHistoCode == "?" )
    {
      std::cout << "TEcnaParHistos::GetTechHistoCode(...)> HistoCode not found. X_Quantity = " << X_Quantity
       << ", Y_Quantity = "<< Y_Quantity << std::endl;
    }
  return TechHistoCode;
}

TString TEcnaParHistos::GetXVarHisto	(	const TString &	HistoCode,
		const TString &	SubDet,
		const Int_t &	StexNumber
	)

Definition at line 2131 of file TEcnaParHistos.cc.

References fgMaxCar, and GetHistoType().

Referenced by TEcnaHistos::ViewHistime(), and TEcnaHistos::ViewHisto().

{
// Type of the quantity as a function of the quantity code
// Histo type <=> Variable in X coordinate

  TString HistoType = GetHistoType(HistoCode.Data());

  TString XVarHisto;
  Int_t MaxCar = fgMaxCar;
  XVarHisto.Resize(MaxCar);
  XVarHisto = "(no X variable info)";

  if( HistoType == "Global" )
    {
      if( StexNumber == 0 && SubDet == "EB" ){XVarHisto = "Tower number";}
      if( StexNumber == 0 && SubDet == "EE" ){XVarHisto = "SC number";}
      if( StexNumber != 0){XVarHisto = "Xtal number";}
    }
  if( HistoType == "Proj" ){XVarHisto = "Bin number";}

  if( HistoType == "H1Basic"){XVarHisto = "Sample number";}
  if( HistoType == "H1BasicProj"){XVarHisto = "Total noise";}

  if( HistoType == "SampGlobal" ){XVarHisto = "Event number";}

  if( HistoType == "SampProj" ){XVarHisto = "ADC count";}

  if( HistoType == "Evol" ){XVarHisto = "Date";}

  if( HistoType == "EvolProj" ){XVarHisto = "Bin number";}

  return XVarHisto;

}// end of GetXVarHisto(...)

Double_t TEcnaParHistos::GetYmaxDefaultValue

(

const TString &

chqcode

)

Definition at line 2317 of file TEcnaParHistos.cc.

References fFlagSubDet.

Referenced by TEcnaHistos::SetAllYminYmaxMemoFromDefaultValues(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::ViewHistime(), TEcnaHistos::ViewHisto(), TEcnaHistos::ViewMatrix(), TEcnaHistos::ViewStas(), TEcnaHistos::ViewStex(), and TEcnaHistos::ViewStin().

{
  Double_t vmax = (Double_t)0.;

  if( fFlagSubDet == "EB" )
    {
      if(chqcode == "H2LFccMosMatrix" ){vmax = (Double_t)1.;}
      if(chqcode == "H2HFccMosMatrix" ){vmax = (Double_t)1.;}
      if(chqcode == "H2CorccInStins"  ){vmax = (Double_t)1.;}

      if(chqcode == "D_NOE_ChNb"){vmax = (Double_t)500.;}
      if(chqcode == "D_Ped_ChNb"){vmax = (Double_t)500.;}
      if(chqcode == "D_TNo_ChNb"){vmax = (Double_t)2.5;}
      if(chqcode == "D_LFN_ChNb"){vmax = (Double_t)2.5;}
      if(chqcode == "D_HFN_ChNb"){vmax = (Double_t)2.5;}
      if(chqcode == "D_MCs_ChNb"){vmax = (Double_t)1.;}
      if(chqcode == "D_SCs_ChNb"){vmax = (Double_t)1.5;}
      
      if(chqcode == "D_NOE_ChDs"){vmax = (Double_t)5000.;}
      if(chqcode == "D_Ped_ChDs"){vmax = (Double_t)5000.;}
      if(chqcode == "D_TNo_ChDs"){vmax = (Double_t)5000.;}
      if(chqcode == "D_LFN_ChDs"){vmax = (Double_t)5000.;}
      if(chqcode == "D_HFN_ChDs"){vmax = (Double_t)5000.;}
      if(chqcode == "D_MCs_ChDs"){vmax = (Double_t)5000.;}
      if(chqcode == "D_SCs_ChDs"){vmax = (Double_t)5000.;}
      
      if(chqcode == "D_MSp_SpNb"){vmax = (Double_t)500.;}
      if(chqcode == "D_MSp_SpDs"){vmax = (Double_t)10.;}
      if(chqcode == "D_SSp_SpNb"){vmax = (Double_t)5.;}
      if(chqcode == "D_SSp_SpDs"){vmax = (Double_t)10.;}
     
      if(chqcode == "D_Adc_EvNb"){vmax = (Double_t)500.;}
      if(chqcode == "D_Adc_EvDs"){vmax = (Double_t)150.;}

      if(chqcode == "H_Ped_Date"){vmax = (Double_t)500.;}
      if(chqcode == "H_TNo_Date"){vmax = (Double_t)5.;}
      if(chqcode == "H_LFN_Date"){vmax = (Double_t)5.;}
      if(chqcode == "H_HFN_Date"){vmax = (Double_t)5.;}
      if(chqcode == "H_MCs_Date"){vmax = (Double_t)1.;}
      if(chqcode == "H_SCs_Date"){vmax = (Double_t)0.5;}

      if(chqcode == "H_Ped_RuDs"){vmax = (Double_t)1000.;}
      if(chqcode == "H_TNo_RuDs"){vmax = (Double_t)1000.;}
      if(chqcode == "H_LFN_RuDs"){vmax = (Double_t)1000.;}
      if(chqcode == "H_HFN_RuDs"){vmax = (Double_t)1000.;}
      if(chqcode == "H_MCs_RuDs"){vmax = (Double_t)1000.;}
      if(chqcode == "H_SCs_RuDs"){vmax = (Double_t)1000.;}
    }

  if( fFlagSubDet == "EE" )
    {
      if(chqcode == "H2LFccMosMatrix"){vmax = (Double_t)1.;}
      if(chqcode == "H2HFccMosMatrix"){vmax = (Double_t)1.;}
      if(chqcode == "H2CorccInStins" ){vmax = (Double_t)0.05;}
      
      if(chqcode == "D_NOE_ChNb"){vmax = (Double_t)500.;}
      if(chqcode == "D_Ped_ChNb"){vmax = (Double_t)500.;}
      if(chqcode == "D_TNo_ChNb"){vmax = (Double_t)5.;}
      if(chqcode == "D_LFN_ChNb"){vmax = (Double_t)5.;}
      if(chqcode == "D_HFN_ChNb"){vmax = (Double_t)5.;}
      if(chqcode == "D_MCs_ChNb"){vmax = (Double_t)1.;}
      if(chqcode == "D_SCs_ChNb"){vmax = (Double_t)2.5;}

      if(chqcode == "D_NOE_ChDs"){vmax = (Double_t)1000.;}
      if(chqcode == "D_Ped_ChDs"){vmax = (Double_t)1000.;}
      if(chqcode == "D_TNo_ChDs"){vmax = (Double_t)1000.;}
      if(chqcode == "D_LFN_ChDs"){vmax = (Double_t)1000.;}
      if(chqcode == "D_HFN_ChDs"){vmax = (Double_t)1000.;}
      if(chqcode == "D_MCs_ChDs"){vmax = (Double_t)1000.;}
      if(chqcode == "D_SCs_ChDs"){vmax = (Double_t)1000.;}

      if(chqcode == "D_MSp_SpNb"){vmax = (Double_t)500.;}
      if(chqcode == "D_MSp_SpDs"){vmax = (Double_t)1000.;}
      if(chqcode == "D_SSp_SpNb"){vmax = (Double_t)5.;}
      if(chqcode == "D_SSp_SpDs"){vmax = (Double_t)100.;}
      
      if(chqcode == "D_Adc_EvNb"){vmax = (Double_t)500.;}
      if(chqcode == "D_Adc_EvDs"){vmax = (Double_t)1000.;}

      if(chqcode == "H_Ped_Date"){vmax = (Double_t)500.;}
      if(chqcode == "H_TNo_Date"){vmax = (Double_t)5.;}
      if(chqcode == "H_LFN_Date"){vmax = (Double_t)5.;}
      if(chqcode == "H_HFN_Date"){vmax = (Double_t)5.;}
      if(chqcode == "H_MCs_Date"){vmax = (Double_t)1.;}
      if(chqcode == "H_SCs_Date"){vmax = (Double_t)0.5;}

      if(chqcode == "H_Ped_RuDs"){vmax = (Double_t)1000.;}
      if(chqcode == "H_TNo_RuDs"){vmax = (Double_t)1000.;}
      if(chqcode == "H_LFN_RuDs"){vmax = (Double_t)1000.;}
      if(chqcode == "H_HFN_RuDs"){vmax = (Double_t)1000.;}
      if(chqcode == "H_MCs_RuDs"){vmax = (Double_t)1000.;}
      if(chqcode == "H_SCs_RuDs"){vmax = (Double_t)1000.;}
    }
  return vmax;
}

Double_t TEcnaParHistos::GetYminDefaultValue

(

const TString &

chqcode

)

Definition at line 2268 of file TEcnaParHistos.cc.

Referenced by TEcnaHistos::SetAllYminYmaxMemoFromDefaultValues(), TEcnaHistos::StexHocoVecoLHFCorcc(), TEcnaHistos::ViewHistime(), TEcnaHistos::ViewHisto(), TEcnaHistos::ViewMatrix(), TEcnaHistos::ViewStas(), TEcnaHistos::ViewStex(), and TEcnaHistos::ViewStin().

{
  Double_t vmin = (Double_t)0.;

  if(chqcode == "H2LFccMosMatrix"){vmin = (Double_t)-1.;}
  if(chqcode == "H2HFccMosMatrix"){vmin = (Double_t)-1.;}
  if(chqcode == "H2CorccInStins" ){vmin = (Double_t)-1.;}

  if(chqcode == "D_NOE_ChNb"){vmin = (Double_t)0.;}
  if(chqcode == "D_Ped_ChNb"){vmin = (Double_t)0.;}
  if(chqcode == "D_TNo_ChNb"){vmin = (Double_t)0.;}
  if(chqcode == "D_MCs_ChNb"){vmin = (Double_t)-1.;}
  if(chqcode == "D_LFN_ChNb"){vmin = (Double_t)0.;}
  if(chqcode == "D_HFN_ChNb"){vmin = (Double_t)0.;}
  if(chqcode == "D_SCs_ChNb"){vmin = (Double_t)-1.;}

  if(chqcode == "D_NOE_ChDs"){vmin = (Double_t)0.1;}
  if(chqcode == "D_Ped_ChDs"){vmin = (Double_t)0.1;}
  if(chqcode == "D_TNo_ChDs"){vmin = (Double_t)0.1;}
  if(chqcode == "D_MCs_ChDs"){vmin = (Double_t)0.1;}
  if(chqcode == "D_LFN_ChDs"){vmin = (Double_t)0.1;}
  if(chqcode == "D_HFN_ChDs"){vmin = (Double_t)0.1;}
  if(chqcode == "D_SCs_ChDs"){vmin = (Double_t)0.1;}

  if(chqcode == "D_MSp_SpNb"){vmin = (Double_t)0.;}
  if(chqcode == "D_MSp_SpDs"){vmin = (Double_t)0.1;}
  if(chqcode == "D_SSp_SpNb"){vmin = (Double_t)0.;}
  if(chqcode == "D_SSp_SpDs"){vmin = (Double_t)0.1;}

  if(chqcode == "D_Adc_EvNb"){vmin = (Double_t)0.;}
  if(chqcode == "D_Adc_EvDs"){vmin = (Double_t)0.1;}

  if(chqcode == "H_Ped_Date"){vmin = (Double_t)0.;}
  if(chqcode == "H_TNo_Date"){vmin = (Double_t)0.;}
  if(chqcode == "H_MCs_Date"){vmin = (Double_t)-1.;}
  if(chqcode == "H_LFN_Date"){vmin = (Double_t)0.;}
  if(chqcode == "H_HFN_Date"){vmin = (Double_t)0.;}
  if(chqcode == "H_SCs_Date"){vmin = (Double_t)0.;}

  if(chqcode == "H_Ped_RuDs"){vmin = (Double_t)0.1;}
  if(chqcode == "H_TNo_RuDs"){vmin = (Double_t)0.1;}
  if(chqcode == "H_MCs_RuDs"){vmin = (Double_t)0.1;}
  if(chqcode == "H_LFN_RuDs"){vmin = (Double_t)0.1;}
  if(chqcode == "H_HFN_RuDs"){vmin = (Double_t)0.1;}
  if(chqcode == "H_SCs_RuDs"){vmin = (Double_t)0.1;}

  return vmin;
}

TString TEcnaParHistos::GetYVarHisto	(	const TString &	HistoCode,
		const TString &	SubDet,
		const Int_t &	StexNumber
	)

Definition at line 2166 of file TEcnaParHistos.cc.

References fgMaxCar, and GetHistoType().

Referenced by TEcnaHistos::ViewHistime(), and TEcnaHistos::ViewHisto().

{
// Type of the quantity as a function of the quantity code
// Histo type <=> Variable in Y coordinate

  TString HistoType = GetHistoType(HistoCode.Data());

  TString YVarHisto;
  Int_t MaxCar = fgMaxCar;
  YVarHisto.Resize(MaxCar);
  YVarHisto = "(no Y variable info)";

  if( HistoType == "Global" )
    {
      if( HistoCode == "D_NOE_ChNb" ){YVarHisto = "Nb of events";}
      if( HistoCode == "D_Ped_ChNb" ){YVarHisto = "Pedestal";}
      if( HistoCode == "D_TNo_ChNb" ){YVarHisto = "Total Noise";}
      if( HistoCode == "D_MCs_ChNb" ){YVarHisto = "Mean Cor(s,s')";}
      if( HistoCode == "D_LFN_ChNb" ){YVarHisto = "Low Freq. Noise";}
      if( HistoCode == "D_HFN_ChNb" ){YVarHisto = "High Freq. Noise";}
      if( HistoCode == "D_SCs_ChNb" ){YVarHisto = "Sigma Cor(s,s')";}
    }

  if( HistoType == "Proj" )
    {
      if( StexNumber == 0 && SubDet == "EB" ){YVarHisto = "Number of towers";}
      if( StexNumber == 0 && SubDet == "EE" ){YVarHisto = "Number of SCs";}
      if( StexNumber != 0){YVarHisto = "Number of Xtals";}
    }

  if( HistoType == "H1Basic"){YVarHisto = "ADC count";}
  if( HistoType == "H1BasicProj"){YVarHisto = "Number of samples";}

  if( HistoType == "SampGlobal" ){YVarHisto = "ADC count";}

  if( HistoType == "SampProj" ){YVarHisto = "Number of events";}

  if( HistoType == "EvolProj" ){YVarHisto = "Number of runs";}

  if( HistoType == "Evol" )
    {
      if( HistoCode == "H_Ped_Date" ){YVarHisto = "Pedestal";}
      if( HistoCode == "H_TNo_Date" ){YVarHisto = "Total Noise";}
      if( HistoCode == "H_MCs_Date" ){YVarHisto = "Mean Cor(s,s')";}
      if( HistoCode == "H_LFN_Date" ){YVarHisto = "Low Freq. Noise";}
      if( HistoCode == "H_HFN_Date" ){YVarHisto = "High Freq. Noise";}
      if( HistoCode == "H_SCs_Date" ){YVarHisto = "Sigma Cor(s,s')";}
    }

//  std::cout << std::endl << "*TEcnaParHistos::GetYVarHisto(...)> HistoType = " << HistoType
//       << ", HistoCode = " << HistoCode
//       << ", StexNumber = " << StexNumber
//       << ", YVarHisto = " << YVarHisto << std::endl;

  return YVarHisto;

}// end of GetYVarHisto(...)

void TEcnaParHistos::Init

(

void

)

Definition at line 85 of file TEcnaParHistos.cc.

References fAllXtalsInStinPlot, fCnaCommand, fCnaError, fgMaxCar, fMarginAutoMinMax, fMaxColorNumber, fMaxNbOfRunsInLists, fNbOfRunsDisplayed, fOnlyOnePlot, fPlotAllXtalsInStin, fSameOnePlot, fSeveralPlot, and fTTBELL.

Referenced by TEcnaParHistos().

{
  fgMaxCar = (Int_t)512;              // max number of characters in TStrings

  fTTBELL = '\007';

  //................ Init CNA Command and error numbering
  fCnaCommand = 0;
  fCnaError   = 0;

  //........................................................................................

  fMaxColorNumber     = (Int_t)4;       // number_of_colors - 1 for histos in option SAME

  fMarginAutoMinMax   = (Double_t)0.05; // factor for automatic margin plots:
                                        // plot min = min - (max-min)*fMarginAutoMinMax
                                        // plot max = max + (max-min)*fMarginAutoMinMax

  fNbOfRunsDisplayed  = (Int_t)20;      // Nb of run numbers displayed on the top of the plot
                                        // in stability/evolution plots, option ONLYONE

  fMaxNbOfRunsInLists = (Int_t)5000;    // Maximum number of runs in the ListOfRun files
                                        // used for the stability/evolution plots.

  //........................ init code plot type                      (Init)
  Int_t MaxCar = fgMaxCar;
  fOnlyOnePlot.Resize(MaxCar);
  fOnlyOnePlot = "ONLYONE";

  MaxCar = fgMaxCar;
  fSeveralPlot.Resize(MaxCar);
  fSeveralPlot = "SAME";

  MaxCar = fgMaxCar;
  fSameOnePlot.Resize(MaxCar);
  fSameOnePlot = "SAME n";

  MaxCar = fgMaxCar;
  fAllXtalsInStinPlot.Resize(MaxCar);
  fAllXtalsInStinPlot = "SAME in Stin";

  fPlotAllXtalsInStin = 0;

}// end of Init()

void TEcnaParHistos::ListOfStandardCodes

(

const TString &

TypeOfCode

)

Definition at line 2820 of file TEcnaParHistos.cc.

References gather_cfg::cout.

Referenced by BuildStandard1DHistoCodeX(), BuildStandard1DHistoCodeXY(), BuildStandard1DHistoCodeY(), BuildStandardBetweenWhatCode(), BuildStandardCovOrCorCode(), BuildStandardDetectorCode(), and BuildStandardPlotOption().

{
  //------ Lists of Standard codes for Plot Histos methods

  if(TypeOfCode == "DetectorCode")
    {
      std::cout << "*--------------------------------------- Standard detector codes:" << std::endl;
      std::cout << "    EB   (ECAL Barrel) " << std::endl;
      std::cout << "    EE   (ECAL Endcap) " << std::endl;
      std::cout << "    SM   (Barrel Super Module) " << std::endl;
      std::cout << "    Dee  (Encap Dee) " << std::endl;
      std::cout << " Other codes are available" << std::endl;
      std::cout << " See source file: TEcnaParHistos::BuildStandardDetectorCode(...)." << std::endl;
      std::cout << "*----------------------------------------------------------------" << std::endl;
    }

  if(TypeOfCode == "PlotOption")
    {
      std::cout << "*--------------------------------------- Standard plot options:" << std::endl;
      std::cout << "    All ROOT DRAW options and: " << std::endl;
      std::cout << "   (nothing) " << std::endl;
      std::cout << "    SAME n   " << std::endl;
      std::cout << "    ASCII    " << std::endl;
      std::cout << " Other codes are available" << std::endl;
      std::cout << " See source file: TEcnaParHistos::BuildStandardPlotOption(...)." << std::endl;
      std::cout << "*--------------------------------------------------------------" << std::endl;
    }

  if(TypeOfCode == "1DHistoCodeX")
    {
      std::cout << "*---------------------- Standard 1D histo codes for X coordinate:" << std::endl;
      std::cout << "    Tow  (SM tower) " << std::endl;
      std::cout << "    SC   (Dee super crystal) " << std::endl;
      std::cout << "    Xtal (crystal) " << std::endl;
      std::cout << "    Smp  (Adc sample) " << std::endl;
      std::cout << "    Evt  (event) " << std::endl;
      std::cout << " Other codes are available" << std::endl;
      std::cout << " See source file: TEcnaParHistos::BuildStandard1DHistoCodeX(...)." << std::endl;
      std::cout << "*----------------------------------------------------------------" << std::endl;
    }

  if(TypeOfCode == "1DHistoCodeY")
    {
      std::cout << "*---------------------- Standard 1D histo codes for Y coordinate;" << std::endl;
      std::cout << "    NOX  (number of crystals) " << std::endl;
      std::cout << "    NOS  (number of samples) " << std::endl;
      std::cout << "    NOR  (number of runs) " << std::endl;
      std::cout << " Other codes are available" << std::endl;
      std::cout << " See source file: TEcnaParHistos::BuildStandard1DHistoCodeY(...)." << std::endl;
      std::cout << "*----------------------------------------------------------------" << std::endl;
    }

  if(TypeOfCode == "1DHistoCodeXY")
    {
      std::cout << "*------------------ Standard 1D histo codes for X or Y coordinate;" << std::endl;
      std::cout << "    NOE  (number of events) " << std::endl;
      std::cout << "    Ped  (pedestal) " << std::endl;
      std::cout << "    TNo  (total noise) " << std::endl;
      std::cout << "    LFN  (low frequency noise) " << std::endl;
      std::cout << "    HFN  (high frequency noise) " << std::endl;
      std::cout << "    MCs  (mean correlation between samples) " << std::endl;
      std::cout << "    SCs  (sigma of correlations between samples) " << std::endl;
      std::cout << "    MSp  (sample mean) " << std::endl;
      std::cout << "    SSp  (sample sigma) " << std::endl;
      std::cout << "    Time (time, date) " << std::endl;
      std::cout << "    Adc  (ADC sample value) " << std::endl;
      std::cout << " Other codes are available" << std::endl;
      std::cout << " See source file: TEcnaParHistos::BuildStandard1DHistoCodeXY(...)." << std::endl;
      std::cout << "*-----------------------------------------------------------------" << std::endl;
    }

  if(TypeOfCode == "CovOrCorCode")
    {
      std::cout << "*-------- Standard codes for matrix type (correlation or covariance);" << std::endl;
      std::cout << "    Cor  (correlation) " << std::endl;
      std::cout << "    cov  (covariance) " << std::endl;
      std::cout << " Other codes are available" << std::endl;
      std::cout << " See source file: TEcnaParHistos::BuildStandardCovOrCorCode(...)." << std::endl;
      std::cout << "*--------------------------------------------------------------------" << std::endl;
    }

  if(TypeOfCode == "BetweenWhatCode")
    {
      std::cout << "*-------- Standard codes for quantities in correlation or covariance;" << std::endl;
      std::cout << "    Mss    (between samples) " << std::endl;
      std::cout << "    MccLF  (low  frequency between channels) " << std::endl;
      std::cout << "    MccHF  (high frequency between channels) " << std::endl;
      std::cout << "    MttLF  (low  frequency between towers [if EB] or SC [if EE]) " << std::endl;
      std::cout << "    MttLF  (high frequency between towers [if EB] or SC [if EE]) " << std::endl;
      std::cout << " Other codes are available" << std::endl;
      std::cout << " See source file: TEcnaParHistos::BuildStandardBetweenWhatCode(...)." << std::endl;
      std::cout << "*--------------------------------------------------------------------" << std::endl;
    }
}

Int_t TEcnaParHistos::MaxNbOfRunsInLists

(

)

Definition at line 164 of file TEcnaParHistos.cc.

References fMaxNbOfRunsInLists.

Referenced by TEcnaHistos::GetHistoryRunListParameters().

{return fMaxNbOfRunsInLists;}

UInt_t TEcnaParHistos::SetCanvasHeight	(	const TString &	HistoCode,
		const TString &	opt_plot
	)

Definition at line 250 of file TEcnaParHistos.cc.

References CanvasFormatH(), and CanvasFormatW().

Referenced by TEcnaHistos::HistimePlot(), and TEcnaHistos::HistoPlot().

{
//........................................ Taille/format canvas
  
  UInt_t canv_h = CanvasFormatH("petit");

  if( HistoCode == "D_Adc_EvNb" || HistoCode == "D_NOE_ChNb" ||
      HistoCode == "D_Ped_ChNb" || HistoCode == "D_LFN_ChNb" ||
      HistoCode == "D_TNo_ChNb" || HistoCode == "D_HFN_ChNb" ||
      HistoCode == "D_MCs_ChNb" || HistoCode == "D_SCs_ChNb" ||
      HistoCode == "H_Ped_Date" || HistoCode == "H_TNo_Date" ||
      HistoCode == "H_MCs_Date" || HistoCode == "H_LFN_Date" ||
      HistoCode == "H_HFN_Date" || HistoCode == "H_SCs_Date" ||
      (HistoCode == "D_MSp_SpNb" && opt_plot != "ONLYONE")   ||
      (HistoCode == "D_SSp_SpNb" && opt_plot != "ONLYONE") )
    {
      canv_h = CanvasFormatW("moyen");    // format 29.7*21 ( = 21*29.7 en paysage)
    }

  if( (HistoCode == "D_Adc_EvDs" || HistoCode == "D_NOE_ChDs" ||
       HistoCode == "D_Ped_ChDs" || HistoCode == "D_LFN_ChDs" ||
       HistoCode == "D_TNo_ChDs" || HistoCode == "D_HFN_ChDs" ||
       HistoCode == "D_MCs_ChDs" || HistoCode == "D_SCs_ChDs" ||
       HistoCode == "D_MSp_SpDs" || HistoCode == "D_SSp_SpDs" ||
       HistoCode == "H_Ped_RuDs" || HistoCode == "H_TNo_RuDs" ||
       HistoCode == "H_MCs_RuDs" || HistoCode == "H_LFN_RuDs" ||
       HistoCode == "H_HFN_RuDs" || HistoCode == "H_SCs_RuDs") && opt_plot != "ONLYONE" )
    {        
      canv_h = CanvasFormatW("moyen");    // format 29.7*21 ( = 21*29.7 en paysage)
    }

  return canv_h;
}

UInt_t TEcnaParHistos::SetCanvasWidth	(	const TString &	HistoCode,
		const TString &	opt_plot
	)

Definition at line 216 of file TEcnaParHistos.cc.

References CanvasFormatH(), and CanvasFormatW().

Referenced by TEcnaHistos::HistimePlot(), and TEcnaHistos::HistoPlot().

{
//........................................ Taille/format canvas
  
  UInt_t canv_w = CanvasFormatW("petit");

  if( HistoCode == "D_Adc_EvNb" || HistoCode == "D_NOE_ChNb" ||
      HistoCode == "D_Ped_ChNb" || HistoCode == "D_LFN_ChNb" ||
      HistoCode == "D_TNo_ChNb" || HistoCode == "D_HFN_ChNb" ||
      HistoCode == "D_MCs_ChNb" || HistoCode == "D_SCs_ChNb" ||
      HistoCode == "H_Ped_Date" || HistoCode == "H_TNo_Date" ||
      HistoCode == "H_MCs_Date" || HistoCode == "H_LFN_Date" ||
      HistoCode == "H_HFN_Date" || HistoCode == "H_SCs_Date" ||
      (HistoCode == "D_MSp_SpNb" && opt_plot != "ONLYONE")   || 
      (HistoCode == "D_SSp_SpNb" && opt_plot != "ONLYONE") )
    {        
      canv_w = CanvasFormatH("moyen");    // format 29.7*21 ( = 21*29.7 en paysage)
    }
  
  if( (HistoCode == "D_Adc_EvDs" || HistoCode == "D_NOE_ChDs" ||
       HistoCode == "D_Ped_ChDs" || HistoCode == "D_LFN_ChDs" ||
       HistoCode == "D_TNo_ChDs" || HistoCode == "D_HFN_ChDs" ||
       HistoCode == "D_MCs_ChDs" || HistoCode == "D_SCs_ChDs" ||
       HistoCode == "D_MSp_SpDs" || HistoCode == "D_SSp_SpDs" ||
       HistoCode == "H_Ped_RuDs" || HistoCode == "H_TNo_RuDs" ||
       HistoCode == "H_MCs_RuDs" || HistoCode == "H_LFN_RuDs" ||
       HistoCode == "H_HFN_RuDs" || HistoCode == "H_SCs_RuDs") && opt_plot != "ONLYONE" )
    {        
      canv_w = CanvasFormatH("moyen");    // format 29.7*21 ( = 21*29.7 en paysage)
    }

  return canv_w;
}

void TEcnaParHistos::SetColorPalette

(

const TString &

user_color_palette

)

Definition at line 457 of file TEcnaParHistos.cc.

References fMaxColorNumber.

Referenced by TEcnaHistos::ViewHistime(), and TEcnaHistos::ViewHisto().

{
  //Set color number for palette

  fMaxColorNumber = 4;         // default: 4 ==> Black/Red/Blue/Green/Braun

  if (!(user_color_palette == "Rainbow" || user_color_palette == "rainbow") ){fMaxColorNumber = 5;}
  if (  user_color_palette == "Rainbow" || user_color_palette == "rainbow"  ){fMaxColorNumber = 6;}
}

Color_t TEcnaParHistos::SetColorsForNumbers

(

const TString &

chtype_number

)

Definition at line 1827 of file TEcnaParHistos.cc.

References ColorDefinition().

Referenced by SetPaveLVRB(), TEcnaHistos::TowerCrystalNumbering(), and TEcnaHistos::ViewSMTowerNumberingPad().

{
 //Set color of the numbers for SuperModule- or Tower-  numbering plots

  Color_t couleur = ColorDefinition("noir");        // default = "noir"

  if ( chtype_number == "crystal"     ){couleur = ColorDefinition("noir");}
  if ( chtype_number == "lvrb_top"    ){couleur = ColorDefinition("rouge");}
  if ( chtype_number == "lvrb_bottom" ){couleur = ColorDefinition("bleu_fonce");}

  return couleur;
}

void TEcnaParHistos::SetEcalSubDetector

(

const TString &

SubDet

)

Definition at line 130 of file TEcnaParHistos.cc.

References fEcal, fFlagSubDet, fgMaxCar, and TEcnaParEcal::GetEcalSubDetector().

Referenced by TEcnaParHistos().

{
 // Set Subdetector (EB or EE)

  Int_t MaxCar = fgMaxCar;
  fFlagSubDet.Resize(MaxCar);
  fFlagSubDet = fEcal->GetEcalSubDetector();
}

void TEcnaParHistos::SetEcalSubDetector	(	const TString &	SubDet,
		const TEcnaParEcal *	pEcal,
		const TEcnaNumbering *	pEcalNumbering
	)

Definition at line 140 of file TEcnaParHistos.cc.

References fEcal, fEcalNumbering, fFlagSubDet, fgMaxCar, and TEcnaParEcal::GetEcalSubDetector().

{
 // Set Subdetector (EB or EE)

  fEcal = nullptr;
  if( pEcal == nullptr )
    {fEcal = new TEcnaParEcal(SubDet.Data());     /*fCnew++*/ ;}
  else
    {fEcal = (TEcnaParEcal*)pEcal;}

  Int_t MaxCar = fgMaxCar;
  fFlagSubDet.Resize(MaxCar);
  fFlagSubDet = fEcal->GetEcalSubDetector();

  fEcalNumbering = nullptr;
  if( pEcalNumbering == nullptr )
    {fEcalNumbering = new TEcnaNumbering(fFlagSubDet.Data(), fEcal);     /*fCnew++*/ ;}
  else
    {fEcalNumbering = (TEcnaNumbering*)pEcalNumbering;}
}

TPaveText * TEcnaParHistos::SetOptionSamePaveBorder	(	const TString &	chopt,
		const TString &	HistoType
	)

Definition at line 1441 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), and fCnewRoot.

Referenced by TEcnaHistos::SetAllPavesViewHisto().

{
// Pave for plots with option SAME and SAME n.
// Gives just the size/border and return the pointer to the Pave. No text.
// The Pave text is drawn in TEcnaHistos.cc
  
  //.................................. DEFAULT OPTION: "several"
  
  Double_t pav_left_xgauche = BoxLeftX("several_plots_box");
  Double_t pav_left_xdroite = BoxRightX("several_plots_box");
  Double_t pav_left_ybas    = BoxBottomY("several_plots_box");
  Double_t pav_left_yhaut   = BoxTopY("several_plots_box");

  if(chopt == "sevevol")
    {    
      pav_left_xgauche = BoxLeftX("several_evol_box");
      pav_left_xdroite = BoxRightX("several_evol_box");
      pav_left_ybas    = BoxBottomY("several_evol_box");
      pav_left_yhaut   = BoxTopY("several_evol_box");

      if( HistoType == "EvolProj" )
    {
      pav_left_xgauche = BoxLeftX("several_evpr_box");
      pav_left_xdroite = BoxRightX("several_evpr_box");
      pav_left_ybas    = BoxBottomY("several_evpr_box");
      pav_left_yhaut   = BoxTopY("several_evpr_box");
    }
    }

  TPaveText *com_several =
    new TPaveText(pav_left_xgauche, pav_left_ybas,
          pav_left_xdroite, pav_left_yhaut);  fCnewRoot++;

  return com_several;
}

TPaveText * TEcnaParHistos::SetPaveAnalysisRun	(	const TString &	ana_type,
		const Int_t &	nb_of_samples,
		const Int_t &	run_number,
		const TString &	run_type,
		const Int_t &	first_evt,
		const Int_t &	last_evt,
		const TString &	nb_col
	)

Definition at line 1226 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, and fgMaxCar.

Referenced by TEcnaHistos::SetAllPavesViewHisto(), TEcnaHistos::SetAllPavesViewMatrix(), TEcnaHistos::SetAllPavesViewStas(), TEcnaHistos::SetAllPavesViewStex(), and TEcnaHistos::SetAllPavesViewStin().

{
// Analysis name + Nb of samples + run number comment

  char f_in[fgMaxCar];
  
  //...................... Pave Analysis name/run number (bottom_left_box)
  Double_t pav_bot_left_xgauche = BoxLeftX("bottom_left_box");
  Double_t pav_bot_left_xdroite = BoxRightX("bottom_left_box");
  Double_t pav_bot_left_ybas    = BoxBottomY("bottom_left_box");
  Double_t pav_bot_left_yhaut   = BoxTopY("bottom_left_box");

  TPaveText *com_bot_left =
    new TPaveText(pav_bot_left_xgauche, pav_bot_left_ybas,
          pav_bot_left_xdroite, pav_bot_left_yhaut);  fCnewRoot++;

  // (1 = left adjusted, 2 = centered adjusted, 3 = left adjusted), 2 = vertically centered
  Int_t   cTextPaveAlign   = 12;    com_bot_left->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New) // 10*4  = 10*(ID4  = Arial)
  Int_t   cTextPaveFont    = 100;    com_bot_left->SetTextFont(cTextPaveFont); 
  // 0.95 = 95% of the pave size         
  Float_t cTextPaveSize    = 0.025;  com_bot_left->SetTextSize(cTextPaveSize);
  // Int_t   cTextPaveShadCol = 0;     com_bot_left->SetShadowColor(cTextPaveShadCol);
  Int_t   cTextBorderSize = 1;      com_bot_left->SetBorderSize(cTextBorderSize);

  if( nb_col == "TwoCol")
    {
      cTextPaveSize = 0.035; com_bot_left->SetTextSize(cTextPaveSize);
      snprintf(f_in, fgMaxCar, "Run:  %d                  Samples:   1 - %d", run_number, nb_of_samples);   
      com_bot_left->AddText(f_in);
      cTextPaveSize = 0.035; com_bot_left->SetTextSize(cTextPaveSize);
      snprintf(f_in, fgMaxCar, "Type: %-20s", run_type.Data());  
      com_bot_left->AddText(f_in);
      snprintf(f_in, fgMaxCar, "Analysis: %-10s         Evts range: %d - %d ", ana_type.Data(), first_evt, last_evt);
      com_bot_left->AddText(f_in);   
    }
  else
    {
      cTextPaveSize    = 0.0225;  com_bot_left->SetTextSize(cTextPaveSize);
      snprintf(f_in, fgMaxCar, "Run:  %d ", run_number);  
      com_bot_left->AddText(f_in);
      snprintf(f_in, fgMaxCar, "Type: %-20s", run_type.Data());  
      com_bot_left->AddText(f_in);
      snprintf(f_in, fgMaxCar, "Analysis: %-10s ", ana_type.Data());
      com_bot_left->AddText(f_in);
      Int_t un = 1; 
      snprintf(f_in, fgMaxCar, "Samples:    %d - %d", un, nb_of_samples);
      com_bot_left->AddText(f_in);
      snprintf(f_in, fgMaxCar, "Evts range: %d - %d", first_evt, last_evt);
      com_bot_left->AddText(f_in);
    }
  
  return com_bot_left;
}

TPaveText * TEcnaParHistos::SetPaveCrystal	(	const Int_t &	StexCrys,
		const Int_t &	StexStinA,
		const Int_t &	StinEcha
	)

Definition at line 1642 of file TEcnaParHistos.cc.

Referenced by TEcnaHistos::SetAllPavesViewHisto(), and TEcnaHistos::SetAllPavesViewMatrix().

{
  Int_t arg_AlreadyRead = 0;
  Int_t flag_all_samples = 0;
  return SetPaveCrystal(StexCrys, StexStinA, StinEcha, arg_AlreadyRead, flag_all_samples);
}

TPaveText * TEcnaParHistos::SetPaveCrystal	(	const Int_t &	StexCrys,
		const Int_t &	StexStinA,
		const Int_t &	StinEcha,
		const Int_t &	arg_AlreadyRead,
		const Int_t &	flag_all_samples
	)

Definition at line 1650 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, fEcal, fFlagSubDet, fgMaxCar, TEcnaParEcal::MaxCrysInStin(), and TEcnaParEcal::MaxCrysIYInDee().

{
// Tower + StinEcha comment. StexCrys range: [1,max]

  char f_in[fgMaxCar];
  //...................... Pave tower/StinEcha(channel)/sample (top_right_box)

  Double_t pav_top_right_xgauche = BoxLeftX("top_right_box_EB");
  Double_t pav_top_right_xdroite = BoxRightX("top_right_box_EB");
  Double_t pav_top_right_ybas    = BoxBottomY("top_right_box_EB");
  Double_t pav_top_right_yhaut   = BoxTopY("top_right_box_EB");
  if( fFlagSubDet == "EE" )
    {
      pav_top_right_xgauche = BoxLeftX("top_right_box_EE");
      pav_top_right_xdroite = BoxRightX("top_right_box_EE");
      pav_top_right_ybas    = BoxBottomY("top_right_box_EE");
      pav_top_right_yhaut   = BoxTopY("top_right_box_EE");
    }

  TPaveText *com_top_right =
    new TPaveText(pav_top_right_xgauche, pav_top_right_ybas,
          pav_top_right_xdroite, pav_top_right_yhaut);  fCnewRoot++;

  // 1 = left adjusted, 2 = vertically centered
  Int_t   cTextPaveAlign = 12;   com_top_right->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)           
  Int_t   cTextPaveFont  = 100;  com_top_right->SetTextFont(cTextPaveFont);   
  // 0.95 = 95% of the pave size      
  Float_t cTextPaveSize  = 0.03; com_top_right->SetTextSize(cTextPaveSize);
  Int_t   cTextBorderSize = 1;   com_top_right->SetBorderSize(cTextBorderSize);

  if( fFlagSubDet == "EB" )
    {
      if( arg_AlreadyRead == 0 || (arg_AlreadyRead == 1 && flag_all_samples == 0 ) )
    { snprintf(f_in, fgMaxCar, "Channel: %d ", StinEcha); }      // EB => range = [0,24]
      if( arg_AlreadyRead == 1 && flag_all_samples == 1 )
    { snprintf(f_in, fgMaxCar, "Channel: 0 to %d", fEcal->MaxCrysInStin()-1 ); }
      com_top_right->AddText(f_in);
      if( arg_AlreadyRead == 0 || (arg_AlreadyRead == 1 && flag_all_samples == 0 ) )
    { snprintf(f_in, fgMaxCar, "Crystal in SM: %d ", StexCrys);
      com_top_right->AddText(f_in); }
    }

  if( fFlagSubDet == "EE" )
    {
      Int_t StinEchap = StinEcha+1;
      if( arg_AlreadyRead == 0 || (arg_AlreadyRead == 1 && flag_all_samples == 0 ) )
    { snprintf(f_in, fgMaxCar, "Xtal in SC: %d ", StinEchap); } // EE => range = [1,25]
      if( arg_AlreadyRead == 1 && flag_all_samples == 1 )
    { snprintf(f_in, fgMaxCar, "Xtal in SC: 1 to %d", fEcal->MaxCrysInStin()); }
      com_top_right->AddText(f_in);
      if( arg_AlreadyRead == 0 || (arg_AlreadyRead == 1 && flag_all_samples == 0 ) )
    {
      Int_t IX_Dee_crys = StexCrys/fEcal->MaxCrysIYInDee() + 1;
      Int_t IY_Dee_crys = StexCrys%fEcal->MaxCrysIYInDee();
      if( IY_Dee_crys == 0 ){IX_Dee_crys--; IY_Dee_crys = fEcal->MaxCrysIYInDee();}     
      snprintf(f_in, fgMaxCar, "(IX,IY)[Xtal]=(%d,%d)", IX_Dee_crys, IY_Dee_crys);
      com_top_right->AddText(f_in);
    }
    }

  return com_top_right; 
}

TPaveText * TEcnaParHistos::SetPaveCrystalSample	(	const Int_t &	StexCrys,
		const Int_t &	StexStinA,
		const Int_t &	StinEcha,
		const Int_t &	iSample
	)

Definition at line 1716 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, fEcal, fFlagSubDet, fgMaxCar, and TEcnaParEcal::MaxCrysIYInDee().

Referenced by TEcnaHistos::SetAllPavesViewHisto().

{
// Tower + StinEcha + sample comment

  char f_in[fgMaxCar];
  //...................... Pave tower/StinEcha(channel)/sample (top_right_box)
  Double_t pav_top_right_xgauche = BoxLeftX("top_right_box_EB");
  Double_t pav_top_right_xdroite = BoxRightX("top_right_box_EB");
  Double_t pav_top_right_ybas    = BoxBottomY("top_right_box_EB");
  Double_t pav_top_right_yhaut   = BoxTopY("top_right_box_EB");
  if( fFlagSubDet == "EE" )
    {
      pav_top_right_xgauche = BoxLeftX("top_right_box_EE");
      pav_top_right_xdroite = BoxRightX("top_right_box_EE");
      pav_top_right_ybas    = BoxBottomY("top_right_box_EE");
      pav_top_right_yhaut   = BoxTopY("top_right_box_EE");
    }

  TPaveText *com_top_right =
    new TPaveText(pav_top_right_xgauche, pav_top_right_ybas,
          pav_top_right_xdroite, pav_top_right_yhaut);  fCnewRoot++;
  
  // 1 = left adjusted, 2 = vertically centered
  Int_t   cTextPaveAlign = 12;   com_top_right->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)            
  Int_t   cTextPaveFont  = 100;  com_top_right->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size    
  Float_t cTextPaveSize  = 0.03; com_top_right->SetTextSize(cTextPaveSize);
  Int_t   cTextBorderSize = 1;   com_top_right->SetBorderSize(cTextBorderSize);


  if( fFlagSubDet == "EB" )
    {
      snprintf(f_in, fgMaxCar, " Channel: %d ", StinEcha);
      com_top_right->AddText(f_in); 
      snprintf(f_in, fgMaxCar, " Crystal in SM: %d ", StexCrys);
      com_top_right->AddText(f_in);
    }

  if( fFlagSubDet == "EE" )
    {
      Int_t StinEchap = StinEcha+1;
      snprintf(f_in, fgMaxCar, " Channel: %d ", StinEchap);    // EE => range = [1,25]
      com_top_right->AddText(f_in); 
      Int_t IX_Dee_crys = StexCrys/fEcal->MaxCrysIYInDee() + 1;
      Int_t IY_Dee_crys = StexCrys%fEcal->MaxCrysIYInDee();
      if( IY_Dee_crys == 0 ){IX_Dee_crys--; IY_Dee_crys = fEcal->MaxCrysIYInDee();}
      snprintf(f_in, fgMaxCar, "(IX,IY)[Xtal]=(%d,%d)", IX_Dee_crys, IY_Dee_crys);
      com_top_right->AddText(f_in);
    }

  Int_t iSample_p = iSample+1;
  snprintf(f_in, fgMaxCar, " Sample: %d ", iSample_p);
  com_top_right->AddText(f_in);

  return com_top_right;
}

TPaveText * TEcnaParHistos::SetPaveCxyz

(

const Int_t &

DeeNumber

)

Definition at line 1986 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), and fCnewRoot.

Referenced by TEcnaHistos::SetAllPavesViewStex(), and TEcnaHistos::SetAllPavesViewStinCrysNb().

{
// Cxyz at the top or at the bottom comment

  //....................... GRAND pave "Cxyz"
  Double_t pav_bot_xgauche = BoxRightX("bottom_mid_box");
  Double_t pav_bot_xdroite = BoxLeftX("bottom_mid_box");
  Double_t pav_bot_ybas    = BoxBottomY("bottom_left_box");
  Double_t pav_bot_yhaut   = BoxTopY("bottom_left_box");
  TPaveText *com_bot_mid =
    new TPaveText(pav_bot_xgauche, pav_bot_ybas,
          pav_bot_xdroite, pav_bot_yhaut);    fCnewRoot++;

  //com_bot_mid->SetOption("arc");
  //com_bot_mid->SetCornerRadius((Double_t)0.5);
  //Int_t   cTextPaveFont  = 100;  com_bot_mid->SetTextFont(cTextPaveFont);

  com_bot_mid->SetTextSize(0.0325);
  //........................................... (SetPaveCxyz)
  if( DeeNumber == 1 )
    {
      com_bot_mid->AddText("        y ");
      com_bot_mid->AddText("        #uparrow ");
      com_bot_mid->AddText(" (Near)    x #leftarrow #otimes z     (Far) " );
    }
  if( DeeNumber == 2 )
    {
      com_bot_mid->AddText("        y ");
      com_bot_mid->AddText("        #uparrow ");
      com_bot_mid->AddText(" (Near)    x #leftarrow #otimes z     (Far) " );
    }
  if( DeeNumber == 3 )
    {
      com_bot_mid->AddText(" y           ");
      com_bot_mid->AddText(" #uparrow          ");
      com_bot_mid->AddText(" (Far)      z (#bullet) #rightarrow x     (Near) " );
    }
  if( DeeNumber == 4 )
    {
      com_bot_mid->AddText(" y           ");
      com_bot_mid->AddText(" #uparrow          ");
      com_bot_mid->AddText(" (Far)      z (#bullet) #rightarrow x     (Near) " );
    }

  // com_bot_mid->AddText(" (from IP) " );
  return com_bot_mid;
} 

TPaveText * TEcnaParHistos::SetPaveDee	(	const TString &	chopt,
		const Int_t &	DeeNumber,
		const TString &	DeeType
	)

Definition at line 1847 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, and fgMaxCar.

Referenced by SetPaveStex().

{
// Dee pav. Called only once.
  
  char f_in[fgMaxCar];

  //.................................. DEFAULT OPTION: "standard"   
  Double_t pav_top_left_xgauche = BoxLeftX("top_left_box_EE");
  Double_t pav_top_left_xdroite = BoxRightX("top_left_box_EE");
  Double_t pav_top_left_ybas    = BoxBottomY("top_left_box_EE");
  Double_t pav_top_left_yhaut   = BoxTopY("top_left_box_EE");
  
  if(chopt == "standard" || chopt == "standGH")
    {  
      pav_top_left_xgauche = BoxLeftX("top_left_box_EE");
      pav_top_left_xdroite = BoxRightX("top_left_box_EE");
      pav_top_left_ybas    = BoxBottomY("top_left_box_EE");
      pav_top_left_yhaut   = BoxTopY("top_left_box_EE");
    }

  if( chopt == "standDee" || chopt == "standStex" )
    {  
      pav_top_left_xgauche = BoxLeftX("top_left_box_Dee");
      pav_top_left_xdroite = BoxRightX("top_left_box_Dee");
      pav_top_left_ybas    = BoxBottomY("top_left_box_Dee");
      pav_top_left_yhaut   = BoxTopY("top_left_box_Dee");
    }

  if(chopt == "several")
    {    
      pav_top_left_xgauche = BoxLeftX("several_plots_box");
      pav_top_left_xdroite = BoxRightX("several_plots_box");
      pav_top_left_ybas    = BoxBottomY("several_plots_box");
      pav_top_left_yhaut   = BoxTopY("several_plots_box");
    }
  if(chopt == "sevevol")
    {    
      pav_top_left_xgauche = BoxLeftX("several_evol_box");
      pav_top_left_xdroite = BoxRightX("several_evol_box");
      pav_top_left_ybas    = BoxBottomY("several_evol_box");
      pav_top_left_yhaut   = BoxTopY("several_evol_box");
    }
  
  TPaveText *com_top_left =
    new TPaveText(pav_top_left_xgauche, pav_top_left_ybas,
          pav_top_left_xdroite, pav_top_left_yhaut);  fCnewRoot++;
  
  // 1 = left adjusted, 2 = vertically centered
  Int_t   cTextPaveAlign = 12;    com_top_left->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)            
  Int_t   cTextPaveFont  = 100;   com_top_left->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size            
  Float_t cTextPaveSize  = 0.04;  com_top_left->SetTextSize(cTextPaveSize);
  Int_t   cTextBorderSize = 1;    com_top_left->SetBorderSize(cTextBorderSize);
  
  if( chopt == "standard" )
    {
      snprintf(f_in, fgMaxCar, " Dee: %d", DeeNumber);
      com_top_left->AddText(f_in);
      snprintf(f_in, fgMaxCar, " (%s)", DeeType.Data());
      com_top_left->AddText(f_in);
    }
  
  if( chopt == "standDee" || chopt == "standStex" || chopt == "standGH" )
    {
      snprintf(f_in, fgMaxCar, " Dee: %d  (%s) ", DeeNumber, DeeType.Data());
      com_top_left->AddText(f_in);
    }
  
  return com_top_left;
}

TPaveText * TEcnaParHistos::SetPaveEvolNbOfEvtsAna	(	const TString &	ana_type,
		const Int_t &	nb_of_samples,
		const Int_t &	first_req_evt,
		const Int_t &	last_req_evt,
		const TString &	HistoType
	)

Definition at line 1332 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, and fgMaxCar.

Referenced by TEcnaHistos::SetAllPavesViewHisto().

{
// Analysis name + run number comment

  char f_in[fgMaxCar];
  
  //...................... Pave Analysis name/run number (bottom_left_box)
  Double_t pav_bot_left_xgauche = BoxLeftX("bottom_left_box");
  Double_t pav_bot_left_xdroite = BoxRightX("bottom_left_box");
  Double_t pav_bot_left_ybas    = BoxBottomY("bottom_left_box");
  Double_t pav_bot_left_yhaut   = BoxTopY("bottom_left_box");

  if( HistoType == "EvolProj" )
    {
      pav_bot_left_xgauche = BoxLeftX("bottom_left_box_evol");
      pav_bot_left_xdroite = BoxRightX("bottom_left_box_evol");
      pav_bot_left_ybas    = BoxBottomY("bottom_left_box_evol");
      pav_bot_left_yhaut   = BoxTopY("bottom_left_box_evol");
    }

  TPaveText *com_bot_left =
    new TPaveText(pav_bot_left_xgauche, pav_bot_left_ybas,
          pav_bot_left_xdroite, pav_bot_left_yhaut);  fCnewRoot++;
  
  // 1 = left adjusted, 2 = vertically centered
  Int_t   cTextPaveAlign = 12;    com_bot_left->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)    // 10*4 = 10*(ID4 = Arial)        
  Int_t   cTextPaveFont  = 100;   com_bot_left->SetTextFont(cTextPaveFont);      
  // 0.95 = 95% of the pave size   
  Float_t cTextPaveSize  = 0.03;  com_bot_left->SetTextSize(cTextPaveSize);
  Int_t   cTextBorderSize = 1;    com_bot_left->SetBorderSize(cTextBorderSize);

  TString analysis_name    = ana_type.Data();

  snprintf(f_in, fgMaxCar, "Analysis:   %s", analysis_name.Data());
  com_bot_left->AddText(f_in);
  snprintf(f_in, fgMaxCar, "Samples:    1 - %d", nb_of_samples);
  com_bot_left->AddText(f_in);
  snprintf(f_in, fgMaxCar, "Evts range: %d - %d ", first_req_evt, last_req_evt);
  com_bot_left->AddText(f_in);

  return com_bot_left;
}

TPaveText * TEcnaParHistos::SetPaveEvolRuns	(	const Int_t &	start_evol_run,
		const TString &	start_evol_date,
		const Int_t &	stop_evol_run,
		const TString &	stop_evol_date,
		const TString &	opt_plot,
		const TString &	HistoType
	)

Definition at line 1378 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, and fgMaxCar.

Referenced by TEcnaHistos::SetAllPavesViewHisto().

{
// First and last run of the list of runs

  char f_in[fgMaxCar];

  //...................... Pave first and last runs (bottom_right_box)
  Double_t pav_border_xgauche = BoxLeftX("bottom_right_box_evol");
  Double_t pav_border_xdroite = BoxRightX("bottom_right_box_evol");
  Double_t pav_border_ybas    = BoxBottomY("bottom_right_box_evol");
  Double_t pav_border_yhaut   = BoxTopY("bottom_right_box_evol");

  if( opt_plot == "SAME n" )
    {
      pav_border_xgauche = BoxLeftX("bottom_right_box_evpr");
      pav_border_xdroite = BoxRightX("bottom_right_box_evpr");
      pav_border_ybas    = BoxBottomY("top_right_box_EB");
      pav_border_yhaut   = BoxTopY("top_right_box_EB");
    }

  TPaveText *pav_evol_runs =
    new TPaveText(pav_border_xgauche, pav_border_ybas,
          pav_border_xdroite, pav_border_yhaut);      fCnewRoot++;

  // 1 = left adjusted, 2 = vertically centered
  Int_t   cTextPaveAlign = 12; pav_evol_runs->SetTextAlign(cTextPaveAlign);
  // 10*4 = 10*(ID4 = Courier helvetica-medium-r-normal = Arial)
  // 10*10 = 10*(ID10 = Courier bold-r-normal = Courier New)          
  Int_t   cTextPaveFont  = 100; pav_evol_runs->SetTextFont(cTextPaveFont);
  // 0.03 = 3% of the pave height           
  Float_t cTextPaveSize  = 0.025;
  if( HistoType == "Evol" || HistoType == "EvolProj"){cTextPaveSize  = 0.0225;}

  pav_evol_runs->SetTextSize(cTextPaveSize);
  Int_t   cTextBorderSize = 1; pav_evol_runs->SetBorderSize(cTextBorderSize);

  if( !( (HistoType == "Evol"     && opt_plot == "SAME n") ||
     (HistoType == "EvolProj" && opt_plot == "SAME n") ) )
    {
      snprintf(f_in, fgMaxCar, "First run: %d", start_evol_run);
      pav_evol_runs->AddText(f_in);
      snprintf(f_in, fgMaxCar, "(%s) ", start_evol_date.Data());
      pav_evol_runs->AddText(f_in);
      snprintf(f_in, fgMaxCar, "Last run:  %d", stop_evol_run);
      pav_evol_runs->AddText(f_in);
      snprintf(f_in, fgMaxCar, "(%s) ", stop_evol_date.Data());
      pav_evol_runs->AddText(f_in);
    }

  if( (HistoType == "Evol"     && opt_plot == "SAME n") ||
      (HistoType == "EvolProj" && opt_plot == "SAME n") )
    {
      snprintf(f_in, fgMaxCar, "First run: %d (%s) ", start_evol_run, start_evol_date.Data());
      pav_evol_runs->AddText(f_in);
      snprintf(f_in, fgMaxCar, "Last run:  %d (%s)", stop_evol_run, stop_evol_date.Data());
      pav_evol_runs->AddText(f_in);
    }
  
  return pav_evol_runs;
}

TPaveText * TEcnaParHistos::SetPaveGeneralComment

(

const TString &

comment

)

Definition at line 1177 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCdelete, fCnew, and fCnewRoot.

Referenced by TEcnaHistos::SetAllPavesViewHisto(), TEcnaHistos::SetAllPavesViewMatrix(), TEcnaHistos::SetAllPavesViewStas(), TEcnaHistos::SetAllPavesViewStex(), and TEcnaHistos::SetAllPavesViewStin().

{
// General comment
 
  TPaveText* title_g1;
 
  if( comment != "" )
    {
      fCnew++;
      
      Double_t pav_gen_xgauche = BoxLeftX("general_comment");
      Double_t pav_gen_xdroite = BoxRightX("general_comment");
      Double_t pav_gen_ybas    = BoxBottomY("general_comment");
      Double_t pav_gen_yhaut   = BoxTopY("general_comment");

      title_g1 =
    new TPaveText(pav_gen_xgauche, pav_gen_ybas,
              pav_gen_xdroite, pav_gen_yhaut);       fCnewRoot++;

      Option_t* opt_pav = "arc";  title_g1->SetOption(opt_pav);  // <= NE MARCHE PAS
      
      TString tit_gen = comment.Data();
      
      //<<<<<<< TEcnaParHistos.cc
      //sprintf( f_in, tit_gen.Data());
      //title_g1->AddText(f_in);
      //=======
      title_g1->AddText(tit_gen);
      //>>>>>>> 1.5

      //   1 = left adjusted, 2 = vertically centered      
      Int_t    cTextPaveAlign   = 12;    title_g1->SetTextAlign(cTextPaveAlign);
      // 10*10 = 10*(ID10 = Courier New) // 10*4  = 10*(ID4  = Arial)      
      Int_t    cTextPaveFont    = 40;    title_g1->SetTextFont(cTextPaveFont);
      // 0.95 = 95% of the pave size      
      Float_t  cTextPaveSize    = 0.04;  title_g1->SetTextSize(cTextPaveSize);
      Int_t    cTextBorderSize  = 0;     title_g1->SetBorderSize(cTextBorderSize);
      Double_t cTextPaveRadius  = 5.;    title_g1->SetCornerRadius(cTextPaveRadius); // <= NE MARCHE PAS
      // Int_t cTextPaveShadCol = 0; title_g1->SetShadowColor(cTextPaveShadCol);  // <= methode non reconnue   

      fCdelete++;
    }
  else
    {
      title_g1 = new TPaveText( 0, 0, 0, 0);  title_g1=nullptr;  fCnewRoot++;
    }
  return title_g1;
}

TPaveText * TEcnaParHistos::SetPaveLVRB	(	const Int_t &	SMNumber,
		const Int_t &	SMtower
	)

Definition at line 1775 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), ColorDefinition(), fCnewRoot, fEcalNumbering, TEcnaNumbering::GetSMHalfBarrel(), TEcnaNumbering::GetTowerLvrbType(), and SetColorsForNumbers().

Referenced by TEcnaHistos::SetAllPavesViewStinCrysNb().

{
// LVRB at the top or at the bottom comment

  //....................... GRAND pave "LVRB"
  Double_t pav_bot_xgauche = BoxLeftX("bottom_left_box");
  Double_t pav_bot_xdroite = BoxRightX("bottom_right_box");
  Double_t pav_bot_ybas    = BoxBottomY("bottom_left_box");
  Double_t pav_bot_yhaut   = BoxTopY("bottom_left_box");
  TPaveText *com_bot_mid =
    new TPaveText(pav_bot_xgauche, pav_bot_ybas,
          pav_bot_xdroite, pav_bot_yhaut);    fCnewRoot++;

  Color_t couleur_noir       = ColorDefinition("noir");
  Color_t couleur_rouge      = SetColorsForNumbers("lvrb_top");
  Color_t couleur_bleu_fonce = SetColorsForNumbers("lvrb_bottom");

  if(fEcalNumbering->GetSMHalfBarrel(SMNumber) == "EB+")
    {
      TText *t1 = com_bot_mid->AddText("   <= IP (#eta = 0)       (#eta = +85) =>   ");
      t1->SetTextColor(couleur_noir);
    }

  if(fEcalNumbering->GetSMHalfBarrel(SMNumber) == "EB-")
    {
      TText *t2 = com_bot_mid->AddText("   <= (#eta = -85)       IP (#eta = 0) =>   ");
      t2->SetTextColor(couleur_noir);
    }

  if(fEcalNumbering->GetTowerLvrbType(SMtower) == "top")
    {
      TText *t3 = nullptr;
      if(fEcalNumbering->GetSMHalfBarrel(SMNumber) == "EB+")
    {t3 =  com_bot_mid->AddText("       <=== LVRB       ");}
      if(fEcalNumbering->GetSMHalfBarrel(SMNumber) == "EB-")
    {t3 =  com_bot_mid->AddText("       LVRB ===>       ");}
      t3->SetTextColor(couleur_rouge);
    }
  
  if(fEcalNumbering->GetTowerLvrbType(SMtower) == "bottom")
    {
      TText *t4 = nullptr;
      if(fEcalNumbering->GetSMHalfBarrel(SMNumber) == "EB+")
    {t4 = com_bot_mid->AddText("        LVRB ===>       ");}
      if(fEcalNumbering->GetSMHalfBarrel(SMNumber) == "EB-")
    {t4 = com_bot_mid->AddText("        <=== LVRB       ");}
      t4->SetTextColor(couleur_bleu_fonce);
    }
  return com_bot_mid;

}//  end of SetPaveLVRB

TPaveText * TEcnaParHistos::SetPaveNbOfEvts	(	const Int_t &	nb_of_evts,
		const TString &	start_date,
		const TString &	stop_date,
		const TString &	nb_col
	)

Definition at line 1283 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, and fgMaxCar.

Referenced by TEcnaHistos::SetAllPavesViewHisto(), TEcnaHistos::SetAllPavesViewMatrix(), TEcnaHistos::SetAllPavesViewStas(), TEcnaHistos::SetAllPavesViewStex(), and TEcnaHistos::SetAllPavesViewStin().

{
// Number of events box

  char f_in[fgMaxCar];
  
  //...................... Pave number of events (bottom_right_box)

  Double_t pav_bot_right_xgauche = BoxLeftX("bottom_right_box");
  Double_t pav_bot_right_xdroite = BoxRightX("bottom_right_box");
  Double_t pav_bot_right_ybas    = BoxBottomY("bottom_right_box");
  Double_t pav_bot_right_yhaut   = BoxTopY("bottom_right_box");
  TPaveText *com_bot_right =
    new TPaveText(pav_bot_right_xgauche, pav_bot_right_ybas,
          pav_bot_right_xdroite, pav_bot_right_yhaut);      fCnewRoot++;

  // 1 = left adjusted, 2 = vertically centered
  Int_t   cTextPaveAlign   = 12;     com_bot_right->SetTextAlign(cTextPaveAlign);
  // 10*4 = 10*(ID4 = Arial)   // 10*10 = 10*(ID10 = Courier New)          
  Int_t   cTextPaveFont    = 100;    com_bot_right->SetTextFont(cTextPaveFont);         
  // 0.05 = 5% of the pave size        
  Float_t cTextPaveSize    = 0.025;  com_bot_right->SetTextSize(cTextPaveSize);
  //Int_t   cTextPaveShadCol = 0;     com_bot_right->SetShadowColor(cTextPaveShadCol);
  Int_t   cTextBorderSize = 1;       com_bot_right->SetBorderSize(cTextBorderSize);

  if( nb_col == "TwoCol")
    {
      cTextPaveSize = 0.0325; com_bot_right->SetTextSize(cTextPaveSize);
      snprintf(f_in, fgMaxCar, "First evt: %s              %8d events ", start_date.Data(), nb_of_evts);
      com_bot_right->AddText(f_in);  
      snprintf(f_in, fgMaxCar, "Last  evt: %s ",  stop_date.Data());
      com_bot_right->AddText(f_in);
    }
  else
    {
      cTextPaveSize = 0.0225; com_bot_right->SetTextSize(cTextPaveSize);
      snprintf(f_in, fgMaxCar, "%d events", nb_of_evts);
      com_bot_right->AddText(f_in);     
      snprintf(f_in, fgMaxCar, "First evt: %s ", start_date.Data());
      com_bot_right->AddText(f_in);      
      snprintf(f_in, fgMaxCar, "Last  evt: %s ",  stop_date.Data());
      com_bot_right->AddText(f_in);
    }
  
  return com_bot_right;
}

TPaveText * TEcnaParHistos::SetPaveSC	(	const Int_t &	DeeSC_X,
		const Int_t &	DeeNumber
	)

Definition at line 1920 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, fEcalNumbering, fgMaxCar, TEcnaNumbering::GetDeeSCConsFrom1DeeSCEcna(), TEcnaNumbering::GetDSFrom1DeeSCEcna(), TEcnaNumbering::GetDSSCFrom1DeeSCEcna(), and TEcnaNumbering::GetSCQuadFrom1DeeSCEcna().

Referenced by SetPaveStin().

{
// SC comment
  
  char f_in[fgMaxCar];
  //...................... Pave SC/crystal(channel)/sample (top_right_box)
  Double_t pav_top_mid_xgauche = BoxLeftX("top_mid_box_EE");
  Double_t pav_top_mid_xdroite = BoxRightX("top_mid_box_EE");
  Double_t pav_top_mid_ybas    = BoxBottomY("top_mid_box_EE");
  Double_t pav_top_mid_yhaut   = BoxTopY("top_mid_box_EE");
  TPaveText *com_top_mid =
    new TPaveText(pav_top_mid_xgauche, pav_top_mid_ybas,
          pav_top_mid_xdroite, pav_top_mid_yhaut);  fCnewRoot++;
  
  // 1 = left adjusted, 2 = vertically centered
  Int_t   cTextPaveAlign = 12;    com_top_mid->SetTextAlign(cTextPaveAlign);        
  // 10*10 = 10*(ID10 = Courier New)
  Int_t   cTextPaveFont  = 100;   com_top_mid->SetTextFont(cTextPaveFont);     
  // 0.95 = 95% of the pave size
  Float_t cTextPaveSize  = 0.03;  com_top_mid->SetTextSize(cTextPaveSize);
  Int_t   cTextBorderSize = 1;    com_top_mid->SetBorderSize(cTextBorderSize);

  snprintf(f_in, fgMaxCar, "Sector: S%d, SC: %d",
      fEcalNumbering->GetDSFrom1DeeSCEcna(DeeNumber, DeeSC_X),
      fEcalNumbering->GetDSSCFrom1DeeSCEcna(DeeNumber, DeeSC_X));
  com_top_mid->AddText(f_in);
  snprintf(f_in, fgMaxCar, "SC for const.: %d",
      fEcalNumbering->GetDeeSCConsFrom1DeeSCEcna(DeeNumber,DeeSC_X));
  com_top_mid->AddText(f_in); 
  snprintf(f_in, fgMaxCar, "Quadrant: %s",
    fEcalNumbering->GetSCQuadFrom1DeeSCEcna(DeeSC_X).Data());
   com_top_mid->AddText(f_in); 

  return com_top_mid;
}

TPaveText * TEcnaParHistos::SetPaveSCsXY	(	const Int_t &	DeeSC_X,
		const Int_t &	DeeSC_Y
	)

Definition at line 1956 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, and fgMaxCar.

Referenced by SetPaveStinsXY().

{
// SCs X and Y for (SCEcha,SCEcha) cov or cor matrix

  char f_in[fgMaxCar];
  //...................... Pave SC/SCEcha(channel)/sample (top_right_box)
  Double_t pav_top_mid_xgauche = BoxLeftX("top_mid_box_EE");
  Double_t pav_top_mid_xdroite = BoxRightX("top_mid_box_EE");
  Double_t pav_top_mid_ybas    = BoxBottomY("top_mid_box_EE");
  Double_t pav_top_mid_yhaut   = BoxTopY("top_mid_box_EE");
  TPaveText *com_top_mid =
    new TPaveText(pav_top_mid_xgauche, pav_top_mid_ybas,
          pav_top_mid_xdroite, pav_top_mid_yhaut);  fCnewRoot++;
  
  // 1 = left adjusted, 2 = vertically centered
  Int_t   cTextPaveAlign = 12;   com_top_mid->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)
  Int_t   cTextPaveFont  = 100;  com_top_mid->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size
  Float_t cTextPaveSize  = 0.03; com_top_mid->SetTextSize(cTextPaveSize);
  Int_t   cTextBorderSize = 1;   com_top_mid->SetBorderSize(cTextBorderSize);

  snprintf(f_in, fgMaxCar, "SC X: %d", DeeSC_X);
  com_top_mid->AddText(f_in);
  snprintf(f_in, fgMaxCar, "SC Y: %d", DeeSC_Y);
  com_top_mid->AddText(f_in);  

  return com_top_mid;
}

TPaveText * TEcnaParHistos::SetPaveSM	(	const TString &	chopt,
		const Int_t &	SM_number,
		const TString &	EB_type
	)

Definition at line 1513 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, fEcal, fgMaxCar, and TEcnaParEcal::MaxSMInEB().

Referenced by SetPaveStex().

{
// Pave for Super-module plots
  
  char f_in[fgMaxCar];

  //.................................. DEFAULT OPTION: "standard"   
  Double_t pav_top_left_xgauche = BoxLeftX("top_left_box_SM");
  Double_t pav_top_left_xdroite = BoxRightX("top_left_box_SM");
  Double_t pav_top_left_ybas    = BoxBottomY("top_left_box_SM");
  Double_t pav_top_left_yhaut   = BoxTopY("top_left_box_SM");

  if( chopt == "standard" || (chopt == "standGH" && EB_type == "EB-") )
    {  
      pav_top_left_xgauche = BoxLeftX("top_left_box_EB");
      pav_top_left_xdroite = BoxRightX("top_left_box_EB");
      pav_top_left_ybas    = BoxBottomY("top_left_box_EB");
      pav_top_left_yhaut   = BoxTopY("top_left_box_EB");
    }

  if( chopt == "standSM" || chopt == "standStex" || (chopt == "standGH" && EB_type == "EB+") )
    {  
      pav_top_left_xgauche = BoxLeftX("top_left_box_SM");
      pav_top_left_xdroite = BoxRightX("top_left_box_SM");
      pav_top_left_ybas    = BoxBottomY("top_left_box_SM");
      pav_top_left_yhaut   = BoxTopY("top_left_box_SM");
    }

  if( chopt == "several" )
    {    
      pav_top_left_xgauche = BoxLeftX("several_plots_box");
      pav_top_left_xdroite = BoxRightX("several_plots_box");
      pav_top_left_ybas    = BoxBottomY("several_plots_box");
      pav_top_left_yhaut   = BoxTopY("several_plots_box");
    }

  if( chopt == "sevevol" )
    {    
      pav_top_left_xgauche = BoxLeftX("several_evol_box");
      pav_top_left_xdroite = BoxRightX("several_evol_box");
      pav_top_left_ybas    = BoxBottomY("several_evol_box");
      pav_top_left_yhaut   = BoxTopY("several_evol_box");
    }

  TPaveText *com_top_left =
    new TPaveText(pav_top_left_xgauche, pav_top_left_ybas,
          pav_top_left_xdroite, pav_top_left_yhaut);  fCnewRoot++;
 
  // 1 = left adjusted, 2 = vertically centered
  Int_t   cTextPaveAlign  = 12;   com_top_left->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)          
  Int_t   cTextPaveFont   = 100;  com_top_left->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size         
  Float_t cTextPaveSize   = 0.04; com_top_left->SetTextSize(cTextPaveSize);
  Int_t   cTextBorderSize = 1;    com_top_left->SetBorderSize(cTextBorderSize);
 
  if( chopt == "standard" || chopt == "standSM" || chopt == "standStex" || chopt == "standGH")
    {
      Int_t sm_nb = SM_number;
      if( EB_type == "EB+" ){ snprintf(f_in, fgMaxCar, "EB+%d", sm_nb);}
      if( EB_type == "EB-" )
    {sm_nb = -SM_number+fEcal->MaxSMInEB()/2;
    snprintf(f_in, fgMaxCar, "EB%d (SM%d)", sm_nb, SM_number);}
      com_top_left->AddText(f_in);
    }

  return com_top_left;
}

TPaveText * TEcnaParHistos::SetPaveStas

(

)

Definition at line 1484 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, fFlagSubDet, and fgMaxCar.

Referenced by TEcnaHistos::SetAllPavesViewStas(), and SetPaveStex().

{
  char f_in[fgMaxCar];
  //.................................. DEFAULT OPTION: "standard"   
  Double_t pav_top_left_xgauche = BoxLeftX("top_left_box_SM");
  Double_t pav_top_left_xdroite = BoxRightX("top_left_box_SM");
  Double_t pav_top_left_ybas    = BoxBottomY("top_left_box_SM");
  Double_t pav_top_left_yhaut   = BoxTopY("top_left_box_SM");

  TPaveText *com_top_left =
    new TPaveText(pav_top_left_xgauche, pav_top_left_ybas,
          pav_top_left_xdroite, pav_top_left_yhaut);  fCnewRoot++;
 
  // 1 = left adjusted, 2 = vertically centered
  Int_t   cTextPaveAlign  = 12;   com_top_left->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)          
  Int_t   cTextPaveFont   = 100;  com_top_left->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size         
  Float_t cTextPaveSize   = 0.04; com_top_left->SetTextSize(cTextPaveSize);
  Int_t   cTextBorderSize = 1;    com_top_left->SetBorderSize(cTextBorderSize);

  if ( fFlagSubDet == "EB"){ snprintf(f_in, fgMaxCar, "EB");}
  if ( fFlagSubDet == "EE"){ snprintf(f_in, fgMaxCar, "EE");}

  com_top_left->AddText(f_in);
  
  return com_top_left;
}

TPaveText * TEcnaParHistos::SetPaveStex	(	const TString &	chopt,
		const Int_t &	StexNumber
	)

Definition at line 2039 of file TEcnaParHistos.cc.

References fEcalNumbering, fFlagSubDet, TEcnaNumbering::GetEEDeeType(), TEcnaNumbering::GetSMHalfBarrel(), SetPaveDee(), SetPaveSM(), and SetPaveStas().

Referenced by TEcnaHistos::SetAllPavesViewHisto(), TEcnaHistos::SetAllPavesViewMatrix(), TEcnaHistos::SetAllPavesViewStex(), TEcnaHistos::SetAllPavesViewStin(), and TEcnaHistos::SetAllPavesViewStinCrysNb().

{
  TPaveText* pav_text = nullptr;

  if( StexNumber > 0 )
    {
      if ( fFlagSubDet == "EB" )
    {
      TString EB_type = fEcalNumbering->GetSMHalfBarrel(StexNumber);
      pav_text = SetPaveSM(chopt, StexNumber, EB_type);
    }
      if ( fFlagSubDet == "EE" )
    {
      TString dee_type = fEcalNumbering->GetEEDeeType(StexNumber);
      pav_text = SetPaveDee(chopt, StexNumber, dee_type);
    }
    }
  if( StexNumber == 0 ){pav_text = SetPaveStas();}

  return pav_text;
}

TPaveText * TEcnaParHistos::SetPaveStin	(	const Int_t &	StinNumber,
		const Int_t &	StexNumber
	)

Definition at line 2061 of file TEcnaParHistos.cc.

References fFlagSubDet, SetPaveSC(), and SetPaveTower().

Referenced by TEcnaHistos::SetAllPavesViewHisto(), TEcnaHistos::SetAllPavesViewMatrix(), TEcnaHistos::SetAllPavesViewStin(), and TEcnaHistos::SetAllPavesViewStinCrysNb().

{
  TPaveText* pav_text = nullptr;
  if ( fFlagSubDet == "EB"){pav_text = SetPaveTower(StinNumber);}
  if ( fFlagSubDet == "EE"){pav_text = SetPaveSC(StinNumber, StexNumber);}
  return pav_text;
}

TPaveText * TEcnaParHistos::SetPaveStinsXY	(	const Int_t &	StexStin_X,
		const Int_t &	StexStin_Y
	)

Definition at line 2069 of file TEcnaParHistos.cc.

References fFlagSubDet, SetPaveSCsXY(), and SetPaveTowersXY().

Referenced by TEcnaHistos::SetAllPavesViewMatrix().

{
  TPaveText* pav_text = nullptr;
  if ( fFlagSubDet == "EB"){pav_text = SetPaveTowersXY(StexStin_X, StexStin_Y);}
  if ( fFlagSubDet == "EE"){pav_text = SetPaveSCsXY(StexStin_X, StexStin_Y);}
  return pav_text;
}

TPaveText * TEcnaParHistos::SetPaveTower

(

const Int_t &

SMtower_X

)

Definition at line 1583 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, and fgMaxCar.

Referenced by SetPaveStin().

{
// Tower comment

  char f_in[fgMaxCar];
  //...................... Pave tower/crystal(channel)/sample (top_right_box)
  Double_t pav_top_mid_xgauche = BoxLeftX("top_mid_box_EB");
  Double_t pav_top_mid_xdroite = BoxRightX("top_mid_box_EB");
  Double_t pav_top_mid_ybas    = BoxBottomY("top_mid_box_EB");
  Double_t pav_top_mid_yhaut   = BoxTopY("top_mid_box_EB");
  TPaveText *com_top_mid =
    new TPaveText(pav_top_mid_xgauche, pav_top_mid_ybas,
          pav_top_mid_xdroite, pav_top_mid_yhaut);  fCnewRoot++;

  // 1 = left adjusted, 2 = vertically centered
  Int_t   cTextPaveAlign = 12;    com_top_mid->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)          
  Int_t   cTextPaveFont  = 100;   com_top_mid->SetTextFont(cTextPaveFont);   
  // 0.95 = 95% of the pave size     
  Float_t cTextPaveSize  = 0.03;  com_top_mid->SetTextSize(cTextPaveSize);
  Int_t   cTextBorderSize = 1;    com_top_mid->SetBorderSize(cTextBorderSize);
      
  snprintf(f_in, fgMaxCar, " Tower: %d ", SMtower_X);
  com_top_mid->AddText(f_in);
  
  return com_top_mid;
}

TPaveText * TEcnaParHistos::SetPaveTowersXY	(	const Int_t &	SMtower_X,
		const Int_t &	SMtower_Y
	)

Definition at line 1611 of file TEcnaParHistos.cc.

References BoxBottomY(), BoxLeftX(), BoxRightX(), BoxTopY(), fCnewRoot, and fgMaxCar.

Referenced by SetPaveStinsXY().

{
// Towers X and Y for (TowEcha,TowEcha) cov or cor matrix

  char f_in[fgMaxCar];
  //...................... Pave tower/TowEcha(channel)/sample (top_right_box)
  Double_t pav_top_mid_xgauche = BoxLeftX("top_mid_box_EB");
  Double_t pav_top_mid_xdroite = BoxRightX("top_mid_box_EB");
  Double_t pav_top_mid_ybas    = BoxBottomY("top_mid_box_EB");
  Double_t pav_top_mid_yhaut   = BoxTopY("top_mid_box_EB");
  TPaveText *com_top_mid =
    new TPaveText(pav_top_mid_xgauche, pav_top_mid_ybas,
          pav_top_mid_xdroite, pav_top_mid_yhaut);  fCnewRoot++;
  
  // 1 = left adjusted, 2 = vertically centered
  Int_t   cTextPaveAlign = 12;   com_top_mid->SetTextAlign(cTextPaveAlign);
  // 10*10 = 10*(ID10 = Courier New)          
  Int_t   cTextPaveFont  = 100;  com_top_mid->SetTextFont(cTextPaveFont);
  // 0.95 = 95% of the pave size            
  Float_t cTextPaveSize  = 0.03; com_top_mid->SetTextSize(cTextPaveSize);
  Int_t   cTextBorderSize = 1;   com_top_mid->SetBorderSize(cTextBorderSize);
          
  snprintf(f_in, fgMaxCar, " Tower X: %d ", SMtower_X);
  com_top_mid->AddText(f_in);
  snprintf(f_in, fgMaxCar, " Tower Y: %d ", SMtower_Y);
  com_top_mid->AddText(f_in);  

  return com_top_mid;
}

void TEcnaParHistos::SetViewGraphOffsets	(	TGraph *	graph,
		const TString &	HistoType
	)

Definition at line 1081 of file TEcnaParHistos.cc.

Referenced by TEcnaHistos::SetGraphPresentation().

{
// Set offsets of labels, title axis, etc... for histo view

  if( (HistoType == "H1Basic") || (HistoType == "Evol") )
    {
      //....................... x axis
      graph->GetXaxis()->SetTitleOffset((Float_t)1.10);
      graph->GetXaxis()->SetTitleSize((Float_t)0.04);

      graph->GetXaxis()->SetLabelOffset((Float_t)0.015);
      graph->GetXaxis()->SetLabelSize((Float_t)0.04);

      graph->GetXaxis()->SetTickLength((Float_t)0.02);
      graph->GetXaxis()->SetNdivisions((Int_t)510);

      //....................... y axis
      graph->GetYaxis()->SetTitleOffset((Float_t)1.25);
      graph->GetYaxis()->SetTitleSize((Float_t)0.04);

      graph->GetYaxis()->SetLabelOffset((Float_t)0.01);
      graph->GetYaxis()->SetLabelSize((Float_t)0.04);

      graph->GetYaxis()->SetTickLength((Float_t)0.03);
      graph->GetYaxis()->SetNdivisions((Int_t)510);
    }
}

void TEcnaParHistos::SetViewHistoOffsets	(	TH1D *	histo,
		const TString &	HistoType,
		const TString &	opt_plot
	)

Definition at line 791 of file TEcnaParHistos.cc.

Referenced by TEcnaHistos::SCCrystalNumbering(), and TEcnaHistos::SetHistoPresentation().

{
// Set offsets of labels, title axis, etc... for histo view
  
  if(HistoType == "Global")
    {
      //....................... x axis
      histo->GetXaxis()->SetTitleOffset((Float_t)1.05);
      histo->GetXaxis()->SetTitleSize((Float_t)0.04);

      histo->GetXaxis()->SetLabelOffset((Float_t)0.006);
      histo->GetXaxis()->SetLabelSize((Float_t)0.04);

      histo->GetXaxis()->SetTickLength((Float_t)0.03);
      histo->GetXaxis()->SetNdivisions((Int_t)510);

      //....................... y axis
      histo->GetYaxis()->SetTitleOffset((Float_t)1.5);
      histo->GetYaxis()->SetTitleSize((Float_t)0.04);

      histo->GetYaxis()->SetLabelOffset((Float_t)0.01);
      histo->GetYaxis()->SetLabelSize((Float_t)0.04);

      histo->GetYaxis()->SetTickLength((Float_t)0.03);
      histo->GetYaxis()->SetNdivisions((Int_t)510);
    }
  
  if(HistoType == "Proj" || HistoType == "SampGlobal" || HistoType == "SampProj" )
    {
      //....................... x axis
      histo->GetXaxis()->SetTitleOffset((Float_t)1.05);
      histo->GetXaxis()->SetTitleSize((Float_t)0.04);

      histo->GetXaxis()->SetLabelOffset((Float_t)0.006);
      histo->GetXaxis()->SetLabelSize((Float_t)0.04);

      histo->GetXaxis()->SetTickLength((Float_t)0.03);
      histo->GetXaxis()->SetNdivisions((Int_t)510);

      //....................... y axis
      histo->GetYaxis()->SetTitleOffset((Float_t)1.75);
      histo->GetYaxis()->SetTitleSize((Float_t)0.04);

      histo->GetYaxis()->SetLabelOffset((Float_t)0.01);
      histo->GetYaxis()->SetLabelSize((Float_t)0.04);

      histo->GetYaxis()->SetTickLength((Float_t)0.03);
      histo->GetYaxis()->SetNdivisions((Int_t)510);
    }
  
  if( HistoType == "H1Basic" || HistoType == "Evol" ||
      ( HistoType == "EvolProj" && !(opt_plot == "SAME" || opt_plot == "SAME n") ) )
    {
      //....................... x axis
      histo->GetXaxis()->SetTitleOffset((Float_t)1.25);
      histo->GetXaxis()->SetTitleSize((Float_t)0.04);

      histo->GetXaxis()->SetLabelOffset((Float_t)0.005);
      histo->GetXaxis()->SetLabelSize((Float_t)0.04);

      histo->GetXaxis()->SetTickLength((Float_t)0.03);
      histo->GetXaxis()->SetNdivisions((Int_t)510);

      //....................... y axis
      histo->GetYaxis()->SetTitleOffset((Float_t)1.75);
      histo->GetYaxis()->SetTitleSize((Float_t)0.04);
      
      histo->GetYaxis()->SetLabelOffset((Float_t)0.01);
      histo->GetYaxis()->SetLabelSize((Float_t)0.04);
      
      histo->GetYaxis()->SetTickLength((Float_t)0.03);
      histo->GetYaxis()->SetNdivisions((Int_t)510);
    }
  
  if( HistoType == "EvolProj" && (opt_plot == "SAME" || opt_plot == "SAME n") )
    {
      //....................... x axis
      histo->GetXaxis()->SetTitleOffset((Float_t)1.25);
      histo->GetXaxis()->SetTitleSize((Float_t)0.04);
      
      histo->GetXaxis()->SetLabelOffset((Float_t)0.005);
      histo->GetXaxis()->SetLabelSize((Float_t)0.04);

      histo->GetXaxis()->SetTickLength((Float_t)0.03);
      histo->GetXaxis()->SetNdivisions((Int_t)510);

      //....................... y axis
      histo->GetYaxis()->SetTitleOffset((Float_t)1.25);
      histo->GetYaxis()->SetTitleSize((Float_t)0.04);

      histo->GetYaxis()->SetLabelOffset((Float_t)0.01);
      histo->GetYaxis()->SetLabelSize((Float_t)0.04);

      histo->GetYaxis()->SetTickLength((Float_t)0.03);
      histo->GetYaxis()->SetNdivisions((Int_t)510);
    }
  
  if(HistoType == "colz")
    {
      //....................... x axis
      histo->GetXaxis()->SetTitleOffset((Float_t)1.25);
      histo->GetXaxis()->SetTitleSize((Float_t)0.04);

      histo->GetXaxis()->SetLabelOffset((Float_t)0.005);
      histo->GetXaxis()->SetLabelSize((Float_t)0.04);

      histo->GetXaxis()->SetTickLength((Float_t)0.03);
      histo->GetXaxis()->SetNdivisions((Int_t)510);

      //....................... y axis
      histo->GetYaxis()->SetTitleOffset((Float_t)1.45);
      histo->GetYaxis()->SetTitleSize((Float_t)0.04);

      histo->GetYaxis()->SetLabelOffset((Float_t)0.01);
      histo->GetYaxis()->SetLabelSize((Float_t)0.04);

      histo->GetYaxis()->SetTickLength((Float_t)0.03);
      histo->GetYaxis()->SetNdivisions((Int_t)510);
    }

  if(HistoType == "lego" || HistoType == "surf" )
    {
      //....................... x axis
      histo->GetXaxis()->SetTitleOffset((Float_t)1.7);
      histo->GetXaxis()->SetTitleSize((Float_t)0.04);

      histo->GetXaxis()->SetLabelOffset((Float_t)0.005);
      histo->GetXaxis()->SetLabelSize((Float_t)0.04);

      histo->GetXaxis()->SetTickLength((Float_t)0.03);
      histo->GetXaxis()->SetNdivisions((Int_t)510);

      //....................... y axis
      histo->GetYaxis()->SetTitleOffset((Float_t)1.85);
      histo->GetYaxis()->SetTitleSize((Float_t)0.04);

      histo->GetYaxis()->SetLabelOffset((Float_t)0.01);
      histo->GetYaxis()->SetLabelSize((Float_t)0.04);

      histo->GetYaxis()->SetTickLength((Float_t)0.03);
      histo->GetYaxis()->SetNdivisions((Int_t)510);
    }

  if(HistoType == "Stin")
    {
      //.......... x axis (remove labels and ticks)
      histo->GetXaxis()->SetTitleOffset((Float_t)9999.);
      histo->GetXaxis()->SetTitleSize((Float_t)0.05); 
 
      histo->GetXaxis()->SetLabelOffset((Float_t)9999.);
      histo->GetXaxis()->SetLabelSize((Float_t)0.);

      histo->GetXaxis()->SetNdivisions((Int_t)1);
      histo->GetXaxis()->SetTickLength((Float_t)0.);

      //.......... y axis (remove labels and ticks)
      histo->GetYaxis()->SetTitleOffset((Float_t)9999.);
      histo->GetYaxis()->SetTitleSize((Float_t)0.05);
     
      histo->GetYaxis()->SetLabelOffset((Float_t)9999.);
      histo->GetYaxis()->SetLabelSize((Float_t)0.);

      histo->GetYaxis()->SetNdivisions((Int_t)1);
      histo->GetYaxis()->SetTickLength((Float_t)0.);
    }

  if( HistoType == "Stex2DEB" || HistoType == "Stex2DEE" || HistoType == "Stex2DEENb" ||
      HistoType == "Stas2DEB" || HistoType == "Stas2DEE" )
    {
      //.......... x axis (remove labels and ticks)
      histo->GetXaxis()->SetTitleOffset((Float_t)9999.);
      histo->GetXaxis()->SetTitleSize((Float_t)0.075); 
 
      histo->GetXaxis()->SetLabelOffset((Float_t)9999.);
      histo->GetXaxis()->SetLabelSize((Float_t)0.);

      histo->GetXaxis()->SetNdivisions((Int_t)1);
      histo->GetXaxis()->SetTickLength((Float_t)0.);

      //.......... y axis (remove labels and ticks)
      histo->GetYaxis()->SetTitleOffset((Float_t)9999.);
      histo->GetYaxis()->SetTitleSize((Float_t)0.075);
     
      histo->GetYaxis()->SetLabelOffset((Float_t)9999.);
      histo->GetYaxis()->SetLabelSize((Float_t)0.);

      histo->GetYaxis()->SetNdivisions((Int_t)1);
      histo->GetYaxis()->SetTickLength((Float_t)0.);
    }
}

void TEcnaParHistos::SetViewHistoPadMargins	(	const TString &	HistoType,
		const TString &	opt_plot
	)

Definition at line 651 of file TEcnaParHistos.cc.

Referenced by TEcnaHistos::SetGraphPresentation(), and TEcnaHistos::SetHistoPresentation().

{
// Set active pad margins for histo view

//.......... default
  gStyle->SetPadBottomMargin(0.125);          
  gStyle->SetPadTopMargin(0.125);
  gStyle->SetPadLeftMargin(0.125);
  gStyle->SetPadRightMargin(0.125);
  
  if(HistoType == "colz"  || HistoType == "lego"  ||
     HistoType == "surf"  || HistoType == "Stin")  
    {
      gStyle->SetPadBottomMargin(0.125);          
      gStyle->SetPadTopMargin(0.135);
      gStyle->SetPadLeftMargin(0.135);
      gStyle->SetPadRightMargin(0.135); 
    }
  
  if( HistoType == "Stex2DEB" )
    {
      gStyle->SetPadBottomMargin(0.145);          
      gStyle->SetPadTopMargin(0.135);
      gStyle->SetPadLeftMargin(0.125);
      gStyle->SetPadRightMargin(0.125); 
    }

  if( HistoType == "Stex2DEE" || HistoType == "Stex2DEENb")
    {
      gStyle->SetPadBottomMargin(0.120);          
      gStyle->SetPadTopMargin(0.110);
      gStyle->SetPadLeftMargin(0.130);
      gStyle->SetPadRightMargin(0.130); 
    }
  if( HistoType == "Stas2DEB" )
    {
      gStyle->SetPadBottomMargin(0.145);          
      gStyle->SetPadTopMargin(0.135);
      gStyle->SetPadLeftMargin(0.125);
      gStyle->SetPadRightMargin(0.125); 
    }

  if( HistoType == "Stas2DEE")
    {
      gStyle->SetPadBottomMargin(0.145);          
      gStyle->SetPadTopMargin(0.135);
      gStyle->SetPadLeftMargin(0.105);
      gStyle->SetPadRightMargin(0.115); 
    }
  if(HistoType == "Global")
    {
      gStyle->SetPadBottomMargin((Float_t)0.125);         
      gStyle->SetPadTopMargin((Float_t)0.175);
      gStyle->SetPadLeftMargin((Float_t)0.115);
      gStyle->SetPadRightMargin((Float_t)0.05);
    }

  if(HistoType == "Proj" || HistoType == "SampProj")
    {
      gStyle->SetPadBottomMargin(0.115);
      gStyle->SetPadTopMargin(0.155);
      gStyle->SetPadLeftMargin(0.15);
      gStyle->SetPadRightMargin(0.05);
    }

  if( HistoType == "H1Basic" )
    {
      gStyle->SetPadBottomMargin(0.1275);         
      gStyle->SetPadTopMargin(0.165);
      gStyle->SetPadLeftMargin(0.15);
      gStyle->SetPadRightMargin(0.05);
    }

  if( HistoType == "Evol" && opt_plot == "ONLYONE")
    {
      gStyle->SetPadBottomMargin(0.110);          
      gStyle->SetPadTopMargin(0.2);
      gStyle->SetPadLeftMargin(0.115);
      gStyle->SetPadRightMargin(0.035);
    }
  if( HistoType == "Evol" && opt_plot == "SAME")
    {
      gStyle->SetPadBottomMargin(0.110);          
      gStyle->SetPadTopMargin(0.185);
      gStyle->SetPadLeftMargin(0.115);
      gStyle->SetPadRightMargin(0.035);   
    }
  if( HistoType == "Evol" && opt_plot == "SAME n")
    {
      gStyle->SetPadBottomMargin(0.110);          
      gStyle->SetPadTopMargin(0.1);
      gStyle->SetPadLeftMargin(0.115);
      gStyle->SetPadRightMargin(0.035);   
    }

  if( HistoType == "EvolProj" && opt_plot == "ONLYONE")
    {
      gStyle->SetPadBottomMargin(0.1275);         
      gStyle->SetPadTopMargin(0.165);
      gStyle->SetPadLeftMargin(0.15);
      gStyle->SetPadRightMargin(0.05);
    }
  if( HistoType == "EvolProj" && opt_plot == "SAME")
    {
      gStyle->SetPadBottomMargin(0.110);          
      gStyle->SetPadTopMargin(0.185);
      gStyle->SetPadLeftMargin(0.115);
      gStyle->SetPadRightMargin(0.035);   
    }
  if( HistoType == "EvolProj" && opt_plot == "SAME n")
    {
      gStyle->SetPadBottomMargin(0.110);          
      gStyle->SetPadTopMargin(0.1);
      gStyle->SetPadLeftMargin(0.115);
      gStyle->SetPadRightMargin(0.035);   
    }
}

void TEcnaParHistos::SetViewHistoStats	(	TH1D *	histo,
		const TString &	HistoType
	)

Definition at line 778 of file TEcnaParHistos.cc.

Referenced by TEcnaHistos::SetHistoPresentation().

{
  // Set stats box for histo view

  Bool_t b_true  = kTRUE;
  Bool_t b_false = kFALSE;

  histo->SetStats(b_false);
          
  if(HistoType == "Global"){histo->SetStats(b_false);}
  if(HistoType == "Proj" || HistoType == "SampProj" ){histo->SetStats(b_true);}
}

void TEcnaParHistos::SetViewHistoStyle

(

const TString &

HistoType

)

Definition at line 579 of file TEcnaParHistos.cc.

Referenced by TEcnaHistos::SCCrystalNumbering(), TEcnaHistos::SetAllPavesViewStex(), TEcnaHistos::SetGraphPresentation(), TEcnaHistos::SetHistoPresentation(), and TEcnaHistos::TowerCrystalNumbering().

{
// Set style parameters for histo view

  //......................... Palette
  gStyle->SetPalette(1,nullptr);  // default: rainbow spectrum

  //............................... Date
  gStyle->SetOptDate(0);

  //............................... Histo title size
  gStyle->SetTitleW(0.5); gStyle->SetTitleH(0.075);     // default

  if( HistoType == "colz"  || HistoType == "lego"  ||
      HistoType == "surf"  || HistoType == "Stin" )
    {gStyle->SetTitleW(0.8); gStyle->SetTitleH(0.075);}

  if( (HistoType == "H1Basic") || (HistoType == "Evol") )
    {gStyle->SetTitleW(0.5); gStyle->SetTitleH(0.075);}

  if( HistoType == "Stex2DEB" )
    {gStyle->SetTitleW(0.2); gStyle->SetTitleH(0.095);}

  if( HistoType == "Stex2DEE" )
    {gStyle->SetTitleW(0.45); gStyle->SetTitleH(0.08);}

  if( HistoType == "Stex2DEENb" )
    {gStyle->SetTitleW(0.85); gStyle->SetTitleH(0.08);}

  if( HistoType == "Stas2DEB" || HistoType == "Stas2DEE" )
    {gStyle->SetTitleW(0.225); gStyle->SetTitleH(0.095);}

  if(HistoType == "Global" || HistoType == "Proj" || HistoType == "SampProj" || HistoType == "EvolProj")
    {gStyle->SetTitleW(0.5); gStyle->SetTitleH(0.08);}

  //............................. Statistics box style
     gStyle->SetOptStat(1110); 

  //............................. Statistics box size
  if( HistoType == "colz"  || HistoType == "lego"  ||
      HistoType == "surf"  || HistoType == "Stin" )
    {
      gStyle->SetStatW(0.55);  gStyle->SetStatH(0.2);
      gStyle->SetStatY(1);
    }

  if( HistoType == "Global" )
    {
      gStyle->SetStatW(0.375);  gStyle->SetStatH(0.180);
      gStyle->SetStatY(0.9875);
    }
  if( HistoType == "Proj" || HistoType == "SampProj" || HistoType == "EvolProj" )
    {
      gStyle->SetStatW(0.375);  gStyle->SetStatH(0.180);
      gStyle->SetStatY(0.9875);
    }

  if( (HistoType == "H1Basic") || (HistoType == "Evol") )
    {
      gStyle->SetStatW(0.375);   gStyle->SetStatH(0.180);
      gStyle->SetStatY(0.9875);
    }

  //....... Marker and line style

  gStyle->SetMarkerStyle(1);
  if( HistoType == "Global" ){gStyle->SetMarkerStyle(20);}


}

Member Data Documentation

TString TEcnaParHistos::fAllXtalsInStinPlot

private

Definition at line 76 of file TEcnaParHistos.h.

Referenced by BuildStandardPlotOption(), GetCodeAllXtalsInStinPlot(), and Init().

Int_t TEcnaParHistos::fCdelete

private

Definition at line 54 of file TEcnaParHistos.h.

Referenced by SetPaveGeneralComment().

Int_t TEcnaParHistos::fCdeleteRoot

private

Definition at line 55 of file TEcnaParHistos.h.

Int_t TEcnaParHistos::fCnaCommand

private

Definition at line 59 of file TEcnaParHistos.h.

Referenced by Init().

Int_t TEcnaParHistos::fCnaError

private

Definition at line 59 of file TEcnaParHistos.h.

Referenced by Init().

Int_t TEcnaParHistos::fCnew

private

Definition at line 54 of file TEcnaParHistos.h.

Referenced by SetPaveGeneralComment().

Int_t TEcnaParHistos::fCnewRoot

private

Definition at line 55 of file TEcnaParHistos.h.

Referenced by SetOptionSamePaveBorder(), SetPaveAnalysisRun(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveCxyz(), SetPaveDee(), SetPaveEvolNbOfEvtsAna(), SetPaveEvolRuns(), SetPaveGeneralComment(), SetPaveLVRB(), SetPaveNbOfEvts(), SetPaveSC(), SetPaveSCsXY(), SetPaveSM(), SetPaveStas(), SetPaveTower(), and SetPaveTowersXY().

TEcnaParEcal* TEcnaParHistos::fEcal

private

Definition at line 61 of file TEcnaParHistos.h.

Referenced by DeeOffsetX(), SetEcalSubDetector(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveSM(), and TEcnaParHistos().

TEcnaNumbering* TEcnaParHistos::fEcalNumbering

private

Definition at line 62 of file TEcnaParHistos.h.

Referenced by SetEcalSubDetector(), SetPaveLVRB(), SetPaveSC(), SetPaveStex(), and TEcnaParHistos().

TString TEcnaParHistos::fFlagSubDet

private

Definition at line 64 of file TEcnaParHistos.h.

Referenced by GetYmaxDefaultValue(), SetEcalSubDetector(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveStas(), SetPaveStex(), SetPaveStin(), and SetPaveStinsXY().

Int_t TEcnaParHistos::fgMaxCar

private

Definition at line 52 of file TEcnaParHistos.h.

Referenced by GetHistoType(), GetQuantityName(), GetXVarHisto(), GetYVarHisto(), Init(), SetEcalSubDetector(), SetPaveAnalysisRun(), SetPaveCrystal(), SetPaveCrystalSample(), SetPaveDee(), SetPaveEvolNbOfEvtsAna(), SetPaveEvolRuns(), SetPaveNbOfEvts(), SetPaveSC(), SetPaveSCsXY(), SetPaveSM(), SetPaveStas(), SetPaveTower(), and SetPaveTowersXY().

Double_t TEcnaParHistos::fMarginAutoMinMax

private

Definition at line 69 of file TEcnaParHistos.h.

Referenced by GetMarginAutoMinMax(), and Init().

Int_t TEcnaParHistos::fMaxColorNumber

private

Definition at line 68 of file TEcnaParHistos.h.

Referenced by ColorTab(), GetMaxNbOfColors(), Init(), and SetColorPalette().

Int_t TEcnaParHistos::fMaxNbOfRunsInLists

private

Definition at line 71 of file TEcnaParHistos.h.

Referenced by Init(), and MaxNbOfRunsInLists().

Int_t TEcnaParHistos::fNbOfRunsDisplayed

private

Definition at line 70 of file TEcnaParHistos.h.

Referenced by GetNbOfRunsDisplayed(), and Init().

TString TEcnaParHistos::fOnlyOnePlot

private

Definition at line 73 of file TEcnaParHistos.h.

Referenced by BuildStandardPlotOption(), GetCodeOnlyOnePlot(), and Init().

Int_t TEcnaParHistos::fPlotAllXtalsInStin

private

Definition at line 77 of file TEcnaParHistos.h.

Referenced by GetCodePlotAllXtalsInStin(), and Init().

TString TEcnaParHistos::fSameOnePlot

private

Definition at line 75 of file TEcnaParHistos.h.

Referenced by BuildStandardPlotOption(), GetCodeSameOnePlot(), and Init().

TString TEcnaParHistos::fSeveralPlot

private

Definition at line 74 of file TEcnaParHistos.h.

Referenced by BuildStandardPlotOption(), GetCodeSeveralPlot(), and Init().

TString TEcnaParHistos::fTTBELL

private

Definition at line 57 of file TEcnaParHistos.h.

Referenced by BuildStandard1DHistoCodeX(), BuildStandard1DHistoCodeXY(), BuildStandard1DHistoCodeY(), BuildStandardBetweenWhatCode(), BuildStandardCovOrCorCode(), BuildStandardDetectorCode(), BuildStandardPlotOption(), GetTechHistoCode(), and Init().