Inheritance diagram for ConfigBuilder.ConfigBuilder:

Classes
class	MassSearchReplaceProcessNameVisitor

Public Member Functions
def	__init__ (self, options, process=None, with_output=False, with_input=False)

def	addCommon (self)

def	addConditions (self)

def	addCustomise (self, unsch=0)

def	addCustomiseCmdLine (self)

def	addExtraStream (self, name, stream, workflow='full')

def	addMaxEvents (self)

def	addOutput (self)

def	addSource (self)

def	addStandardSequences (self)

def	build_production_info (self, evt_type, evtnumber)

def	completeInputCommand (self)

def	create_process (self)

def	define_Configs (self)

def	executeAndRemember (self, command)

def	expandMapping (self, seqList, mapping, index=None)

def	finalizeFastSimHLT (self)

def	load (self, includeFile)

def	loadAndRemember (self, includeFile)

def	loadDefaultOrSpecifiedCFF (self, sequence, defaultCFF)

def	prepare (self, doChecking=False)

def	prepare_ALCA (self, sequence=None, workflow='full')

def	prepare_ALCAHARVEST (self, sequence=None)

def	prepare_ALCAOUTPUT (self, sequence=None)

def	prepare_ALCAPRODUCER (self, sequence=None)

def	prepare_CFWRITER (self, sequence=None)

def	prepare_DATAMIX (self, sequence=None)

def	prepare_DIGI (self, sequence=None)

def	prepare_DIGI2RAW (self, sequence=None)

def	prepare_DQM (self, sequence='DQMOffline')

def	prepare_EI (self, sequence=None)

def	prepare_ENDJOB (self, sequence='endOfProcess')

def	prepare_FILTER (self, sequence=None)

def	prepare_GEN (self, sequence=None)

def	prepare_HARVESTING (self, sequence=None)

def	prepare_HLT (self, sequence=None)

def	prepare_L1 (self, sequence=None)

def	prepare_L1HwVal (self, sequence='L1HwVal')

def	prepare_L1Reco (self, sequence="L1Reco")

def	prepare_L1REPACK (self, sequence=None)

def	prepare_L1TrackTrigger (self, sequence="L1TrackTrigger")

def	prepare_LHE (self, sequence=None)

def	prepare_NANO (self, sequence="nanoAOD")

def	prepare_PAT (self, sequence="miniAOD")

def	prepare_PATFILTER (self, sequence=None)

def	prepare_PATGEN (self, sequence="miniGEN")

def	prepare_POSTRECO (self, sequence=None)

def	prepare_RAW2DIGI (self, sequence="RawToDigi")

def	prepare_RAW2RECO (self, sequence=None)

def	prepare_RECO (self, sequence="reconstruction")

def	prepare_RECOBEFMIX (self, sequence="reconstruction")

def	prepare_RECOSIM (self, sequence="recosim")

def	prepare_REPACK (self, sequence=None)

def	prepare_SIM (self, sequence=None)

def	prepare_SKIM (self, sequence="all")

def	prepare_USER (self, sequence=None)

def	prepare_VALIDATION (self, sequence='validation')

def	profileOptions (self)

def	renameHLTprocessInSequence (self, sequence, proc=None, HLTprocess='HLT')

def	renameInputTagsInSequence (self, sequence, oldT="rawDataCollector", newT="rawDataRepacker")

def	scheduleSequence (self, seq, prefix, what='Path')

def	scheduleSequenceAtEnd (self, seq, prefix)

Public Attributes
	addedObjects

	additionalCommands

	additionalOutputs

	ALCADefaultCFF

	ALCADefaultSeq

	ALCAHARVESTDefaultCFF

	ALCAHARVESTDefaultSeq

	AlCaPaths

	blacklist_paths

	CFWRITERDefaultCFF

	CFWRITERDefaultSeq

	conditionalPaths

	ConditionsDefaultCFF

	DATAMIXDefaultCFF

	DATAMIXDefaultSeq

	DIGI2RAWDefaultCFF

	DIGI2RAWDefaultSeq

	DIGIDefaultCFF

	DIGIDefaultSeq

	DQMDefaultSeq

	DQMOFFLINEDefaultCFF

	DQMSaverCFF

	EIDefaultCFF

	EIDefaultSeq

	ENDJOBDefaultCFF

	ENDJOBDefaultSeq

	EVTCONTDefaultCFF

	excludedPaths

	GENDefaultCFF

	GENDefaultSeq

	GeometryCFF

	geometryDBLabel

	HARVESTINGDefaultCFF

	HARVESTINGDefaultSeq

	HLTDefaultCFF

	HLTDefaultSeq

	imports

	inliner
	load the relevant part More...

	L1DefaultSeq

	L1EMDefaultCFF

	L1HwValDefaultCFF

	L1HwValDefaultSeq

	L1MENUDefaultCFF

	L1RecoDefaultCFF

	L1RecoDefaultSeq

	L1REPACKDefaultSeq

	L1TrackTriggerDefaultCFF

	L1TrackTriggerDefaultSeq

	labelsToAssociate

	LHEDefaultSeq

	magFieldCFF

	NANODefaultCFF

	NANODefaultSeq

	nextScheduleIsConditional
	put the filtering path in the schedule More...

	PATDefaultCFF

	PATDefaultSeq

	PATGENDefaultCFF

	PATGENDefaultSeq

	POSTRECODefaultCFF

	POSTRECODefaultSeq

	process
	adding standard sequences might change the inputEventContent option and therefore needs to be finalized after More...

	productionFilterSequence
	put it before all the other paths More...

	pythonCfgCode

	RAW2DIGIDefaultCFF

	RAW2DIGIDefaultSeq

	RAW2RECODefaultSeq

	RECOBEFMIXDefaultCFF

	RECOBEFMIXDefaultSeq

	RECODefaultCFF

	RECODefaultSeq

	RECOSIMDefaultCFF

	RECOSIMDefaultSeq

	REDIGIDefaultSeq

	REPACKDefaultCFF

	REPACKDefaultSeq

	runsAndWeights
	drop LHEXMLStringProduct on input to save memory if appropriate More...

	schedule

	SIMDefaultCFF

	SIMDefaultSeq

	SimGeometryCFF

	SKIMDefaultCFF

	stepKeys

	stepMap

	USERDefaultCFF

	USERDefaultSeq

	VALIDATIONDefaultCFF

	VALIDATIONDefaultSeq

	with_input

	with_output

Private Attributes
	_options

Detailed Description

The main building routines

Definition at line 193 of file ConfigBuilder.py.

Constructor & Destructor Documentation

def ConfigBuilder.ConfigBuilder.__init__	(	self,
		options,
		process = `None`,
		with_output = `False`,
		with_input = `False`
	)

options taken from old cmsDriver and optparse

Definition at line 196 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_FILTER().

     def __init__(self, options, process = None, with_output = False, with_input = False ):
         """options taken from old cmsDriver and optparse """
 
         options.outfile_name = options.dirout+options.fileout
 
         self._options = options
 
         if self._options.isData and options.isMC:
             raise Exception("ERROR: You may specify only --data or --mc, not both")
         #if not self._options.conditions:
         #        raise Exception("ERROR: No conditions given!\nPlease specify conditions. E.g. via --conditions=IDEAL_30X::All")
 
         # check that MEtoEDMConverter (running in ENDJOB) and DQMIO don't run in the same job
         if 'ENDJOB' in self._options.step:
             if  (hasattr(self._options,"outputDefinition") and \
                 self._options.outputDefinition != '' and \
                 any(anyOf(['t','tier','dataTier'],outdic) == 'DQMIO' for outdic in eval(self._options.outputDefinition))) or \
                 (hasattr(self._options,"datatier") and \
                 self._options.datatier and \
                 'DQMIO' in self._options.datatier):
                 print("removing ENDJOB from steps since not compatible with DQMIO dataTier")
                 self._options.step=self._options.step.replace(',ENDJOB','')
 
 
 
         # what steps are provided by this class?
         stepList = [re.sub(r'^prepare_', '', methodName) for methodName in ConfigBuilder.__dict__ if methodName.startswith('prepare_')]
         self.stepMap={}
         self.stepKeys=[]
         for step in self._options.step.split(","):
             if step=='': continue
             stepParts = step.split(":")
             stepName = stepParts[0]
             if stepName not in stepList and not stepName.startswith('re'):
                 raise ValueError("Step "+stepName+" unknown")
             if len(stepParts)==1:
                 self.stepMap[stepName]=""
             elif len(stepParts)==2:
                 self.stepMap[stepName]=stepParts[1].split('+')
             elif len(stepParts)==3:
                 self.stepMap[stepName]=(stepParts[2].split('+'),stepParts[1])
             else:
                 raise ValueError("Step definition "+step+" invalid")
             self.stepKeys.append(stepName)
 
         #print "map of steps is:",self.stepMap
 
         self.with_output = with_output
         self.process=process
 
         if hasattr(self._options,"no_output_flag") and self._options.no_output_flag:
             self.with_output = False
         self.with_input = with_input
         self.imports = []
         self.create_process()
         self.define_Configs()
         self.schedule = list()
 
         # we are doing three things here:
         # creating a process to catch errors
         # building the code to re-create the process
 
         self.additionalCommands = []
         # TODO: maybe a list of to be dumped objects would help as well
         self.blacklist_paths = []
         self.addedObjects = []
         self.additionalOutputs = {}
 
         self.productionFilterSequence = None
         self.labelsToAssociate=[]
         self.nextScheduleIsConditional=False
         self.conditionalPaths=[]
         self.excludedPaths=[]
 

Member Function Documentation

def ConfigBuilder.ConfigBuilder.addCommon ( self )

Definition at line 337 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.profileOptions().

Referenced by ConfigBuilder.ConfigBuilder.prepare().

     def addCommon(self):
         if 'HARVESTING' in self.stepMap.keys() or 'ALCAHARVEST' in self.stepMap.keys():
             self.process.options = cms.untracked.PSet( Rethrow = cms.untracked.vstring('ProductNotFound'),fileMode = cms.untracked.string('FULLMERGE'))
         else:
             self.process.options = cms.untracked.PSet( )
 
         self.addedObjects.append(("","options"))
 
         if self._options.lazy_download:
             self.process.AdaptorConfig = cms.Service("AdaptorConfig",
                                                      stats = cms.untracked.bool(True),
                                                      enable = cms.untracked.bool(True),
                                                      cacheHint = cms.untracked.string("lazy-download"),
                                                      readHint = cms.untracked.string("read-ahead-buffered")
                                                      )
             self.addedObjects.append(("Setup lazy download","AdaptorConfig"))
 
         #self.process.cmsDriverCommand = cms.untracked.PSet( command=cms.untracked.string('cmsDriver.py '+self._options.arguments) )
         #self.addedObjects.append(("what cmsDriver command was used","cmsDriverCommand"))
 
         if self._options.profile:
             (start, interval, eventFormat, jobFormat)=self.profileOptions()
             self.process.IgProfService = cms.Service("IgProfService",
                                                      reportFirstEvent            = cms.untracked.int32(start),
                                                      reportEventInterval         = cms.untracked.int32(interval),
                                                      reportToFileAtPostEvent     = cms.untracked.string("| gzip -c > %s"%(eventFormat)),
                                                      reportToFileAtPostEndJob    = cms.untracked.string("| gzip -c > %s"%(jobFormat)))
             self.addedObjects.append(("Setup IGProf Service for profiling","IgProfService"))
 

def ConfigBuilder.ConfigBuilder.addConditions ( self )

Add conditions to the process

Definition at line 808 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.ConditionsDefaultCFF, ConfigBuilder.ConfigBuilder.loadAndRemember(), and edm.print().

Referenced by ConfigBuilder.ConfigBuilder.prepare().

     def addConditions(self):
         """Add conditions to the process"""
         if not self._options.conditions: return
 
         if 'FrontierConditions_GlobalTag' in self._options.conditions:
             print('using FrontierConditions_GlobalTag in --conditions is not necessary anymore and will be deprecated soon. please update your command line')
             self._options.conditions = self._options.conditions.replace("FrontierConditions_GlobalTag,",'')
 
         self.loadAndRemember(self.ConditionsDefaultCFF)
         from Configuration.AlCa.GlobalTag import GlobalTag
         self.process.GlobalTag = GlobalTag(self.process.GlobalTag, self._options.conditions, self._options.custom_conditions)
         self.additionalCommands.append('from Configuration.AlCa.GlobalTag import GlobalTag')
         self.additionalCommands.append('process.GlobalTag = GlobalTag(process.GlobalTag, %s, %s)' % (repr(self._options.conditions), repr(self._options.custom_conditions)))
 
 

def ConfigBuilder.ConfigBuilder.addCustomise	(	self,
		unsch = `0`
	)

Include the customise code

Definition at line 823 of file ConfigBuilder.py.

References FrontierConditions_GlobalTag_cff.file, join(), edm.print(), DTT0WireWorkflow.DTT0WireWorkflow.process, DTVdriftWorkflow.DTvdriftWorkflow.process, DTTtrigWorkflow.DTttrigWorkflow.process, DTWorkflow.DTWorkflow.process, ConfigBuilder.ConfigBuilder.process, and python.rootplot.root2matplotlib.replace().

Referenced by ConfigBuilder.ConfigBuilder.prepare().

     def addCustomise(self,unsch=0):
         """Include the customise code """
 
         custOpt=[]
         if unsch==0:
             for c in self._options.customisation_file:
                 custOpt.extend(c.split(","))
         else:
             for c in self._options.customisation_file_unsch:
                 custOpt.extend(c.split(","))
 
         custMap=DictTypes.SortedKeysDict()
         for opt in custOpt:
             if opt=='': continue
             if opt.count('.')>1:
                 raise Exception("more than . in the specification:"+opt)
             fileName=opt.split('.')[0]
             if opt.count('.')==0:   rest='customise'
             else:
                 rest=opt.split('.')[1]
                 if rest=='py': rest='customise' #catch the case of --customise file.py
 
             if fileName in custMap:
                 custMap[fileName].extend(rest.split('+'))
             else:
                 custMap[fileName]=rest.split('+')
 
         if len(custMap)==0:
             final_snippet='\n'
         else:
             final_snippet='\n# customisation of the process.\n'
 
         allFcn=[]
         for opt in custMap:
             allFcn.extend(custMap[opt])
         for fcn in allFcn:
             if allFcn.count(fcn)!=1:
                 raise Exception("cannot specify twice "+fcn+" as a customisation method")
 
         for f in custMap:
             # let python search for that package and do syntax checking at the same time
             packageName = f.replace(".py","").replace("/",".")
             __import__(packageName)
             package = sys.modules[packageName]
 
             # now ask the package for its definition and pick .py instead of .pyc
             customiseFile = re.sub(r'\.pyc$', '.py', package.__file__)
 
             final_snippet+='\n# Automatic addition of the customisation function from '+packageName+'\n'
             if self._options.inline_custom:
                 for line in file(customiseFile,'r'):
                     if "import FWCore.ParameterSet.Config" in line:
                         continue
                     final_snippet += line
             else:
                 final_snippet += 'from %s import %s \n'%(packageName,','.join(custMap[f]))
             for fcn in custMap[f]:
                 print("customising the process with",fcn,"from",f)
                 if not hasattr(package,fcn):
                     #bound to fail at run time
                     raise Exception("config "+f+" has no function "+fcn)
                 #execute the command
                 self.process=getattr(package,fcn)(self.process)
                 #and print it in the configuration
                 final_snippet += "\n#call to customisation function "+fcn+" imported from "+packageName
                 final_snippet += "\nprocess = %s(process)\n"%(fcn,)
 
         if len(custMap)!=0:
             final_snippet += '\n# End of customisation functions\n'
 
         ### now for a useful command
         return final_snippet
 

def ConfigBuilder.ConfigBuilder.addCustomiseCmdLine ( self )

Definition at line 896 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.executeAndRemember().

Referenced by ConfigBuilder.ConfigBuilder.prepare().

     def addCustomiseCmdLine(self):
         final_snippet='\n# Customisation from command line\n'
         if self._options.customise_commands:
             import string
             for com in self._options.customise_commands.split('\\n'):
                 com=string.lstrip(com)
                 self.executeAndRemember(com)
                 final_snippet +='\n'+com
 
         return final_snippet
 

def ConfigBuilder.ConfigBuilder.addExtraStream	(	self,
		name,
		stream,
		workflow = `'full'`
	)

Definition at line 1128 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_SKIM().

     def addExtraStream(self,name,stream,workflow='full'):
             # define output module and go from there
         output = cms.OutputModule("PoolOutputModule")
         if stream.selectEvents.parameters_().__len__()!=0:
             output.SelectEvents = stream.selectEvents
         else:
             output.SelectEvents = cms.untracked.PSet()
             output.SelectEvents.SelectEvents=cms.vstring()
             if isinstance(stream.paths,tuple):
                 for path in stream.paths:
                     output.SelectEvents.SelectEvents.append(path.label())
             else:
                 output.SelectEvents.SelectEvents.append(stream.paths.label())
 
 
 
         if isinstance(stream.content,str):
             evtPset=getattr(self.process,stream.content)
             for p in evtPset.parameters_():
                 setattr(output,p,getattr(evtPset,p))
             if not self._options.inlineEventContent:
                 def doNotInlineEventContent(instance,label = "process."+stream.content+".outputCommands"):
                     return label
                 output.outputCommands.__dict__["dumpPython"] = doNotInlineEventContent
         else:
             output.outputCommands = stream.content
 
 
         output.fileName = cms.untracked.string(self._options.dirout+stream.name+'.root')
 
         output.dataset  = cms.untracked.PSet( dataTier = stream.dataTier,
                                               filterName = cms.untracked.string(stream.name))
 
         if self._options.filtername:
             output.dataset.filterName= cms.untracked.string(self._options.filtername+"_"+stream.name)
 
         #add an automatic flushing to limit memory consumption
         output.eventAutoFlushCompressedSize=cms.untracked.int32(5*1024*1024)
 
         if workflow in ("producers,full"):
             if isinstance(stream.paths,tuple):
                 for path in stream.paths:
                     self.schedule.append(path)
             else:
                 self.schedule.append(stream.paths)
 
 
         # in case of relvals we don't want to have additional outputs
         if (not self._options.relval) and workflow in ("full","output"):
             self.additionalOutputs[name] = output
             setattr(self.process,name,output)
 
         if workflow == 'output':
             # adjust the select events to the proper trigger results from previous process
             filterList = output.SelectEvents.SelectEvents
             for i, filter in enumerate(filterList):
                 filterList[i] = filter+":"+self._options.triggerResultsProcess
 
         return output
 

def ConfigBuilder.ConfigBuilder.addMaxEvents ( self )

Here we decide how many evts will be processed

Definition at line 366 of file ConfigBuilder.py.

References createfilelist.int.

Referenced by ConfigBuilder.ConfigBuilder.prepare().

     def addMaxEvents(self):
         """Here we decide how many evts will be processed"""
         self.process.maxEvents=cms.untracked.PSet(input=cms.untracked.int32(int(self._options.number)))
         if self._options.number_out:
             self.process.maxEvents.output = cms.untracked.int32(int(self._options.number_out))
         self.addedObjects.append(("","maxEvents"))
 

def ConfigBuilder.ConfigBuilder.addOutput ( self )

Add output module to the process

Definition at line 501 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.AlCaPaths, ConfigBuilder.anyOf(), ConfigBuilder.ConfigBuilder.executeAndRemember(), join(), miniAOD_tools.miniAOD_customizeOutput(), edm.print(), DTT0WireWorkflow.DTT0WireWorkflow.process, DTVdriftWorkflow.DTvdriftWorkflow.process, DTTtrigWorkflow.DTttrigWorkflow.process, DTWorkflow.DTWorkflow.process, ConfigBuilder.ConfigBuilder.process, python.rootplot.root2matplotlib.replace(), split, and ComparisonHelper.zip().

Referenced by ConfigBuilder.ConfigBuilder.prepare().

     def addOutput(self):
         """ Add output module to the process """
         result=""
         if self._options.outputDefinition:
             if self._options.datatier:
                 print("--datatier & --eventcontent options ignored")
 
             #new output convention with a list of dict
             outList = eval(self._options.outputDefinition)
             for (id,outDefDict) in enumerate(outList):
                 outDefDictStr=outDefDict.__str__()
                 if not isinstance(outDefDict,dict):
                     raise Exception("--output needs to be passed a list of dict"+self._options.outputDefinition+" is invalid")
                 #requires option: tier
                 theTier=anyOf(['t','tier','dataTier'],outDefDict)
                 #optional option: eventcontent, filtername, selectEvents, moduleLabel, filename
                 ## event content
                 theStreamType=anyOf(['e','ec','eventContent','streamType'],outDefDict,theTier)
                 theFilterName=anyOf(['f','ftN','filterName'],outDefDict,'')
                 theSelectEvent=anyOf(['s','sE','selectEvents'],outDefDict,'')
                 theModuleLabel=anyOf(['l','mL','moduleLabel'],outDefDict,'')
                 theExtraOutputCommands=anyOf(['o','oC','outputCommands'],outDefDict,'')
                 # module label has a particular role
                 if not theModuleLabel:
                     tryNames=[theStreamType.replace(theTier.replace('-',''),'')+theTier.replace('-','')+'output',
                               theStreamType.replace(theTier.replace('-',''),'')+theTier.replace('-','')+theFilterName+'output',
                               theStreamType.replace(theTier.replace('-',''),'')+theTier.replace('-','')+theFilterName+theSelectEvent.split(',')[0].replace(':','for').replace(' ','')+'output'
                               ]
                     for name in tryNames:
                         if not hasattr(self.process,name):
                             theModuleLabel=name
                             break
                 if not theModuleLabel:
                     raise Exception("cannot find a module label for specification: "+outDefDictStr)
                 if id==0:
                     defaultFileName=self._options.outfile_name
                 else:
                     defaultFileName=self._options.outfile_name.replace('.root','_in'+theTier+'.root')
 
                 theFileName=self._options.dirout+anyOf(['fn','fileName'],outDefDict,defaultFileName)
                 if not theFileName.endswith('.root'):
                     theFileName+='.root'
 
                 if len(outDefDict):
                     raise Exception("unused keys from --output options: "+','.join(outDefDict.keys()))
                 if theStreamType=='DQMIO': theStreamType='DQM'
                 if theStreamType=='ALL':
                     theEventContent = cms.PSet(outputCommands = cms.untracked.vstring('keep *'))
                 else:
                     theEventContent = getattr(self.process, theStreamType+"EventContent")
 
 
                 addAlCaSelects=False
                 if theStreamType=='ALCARECO' and not theFilterName:
                     theFilterName='StreamALCACombined'
                     addAlCaSelects=True
 
                 CppType='PoolOutputModule'
                 if self._options.timeoutOutput:
                     CppType='TimeoutPoolOutputModule'
                 if theStreamType=='DQM' and theTier=='DQMIO': CppType='DQMRootOutputModule'
                 output = cms.OutputModule(CppType,
                                           theEventContent.clone(),
                                           fileName = cms.untracked.string(theFileName),
                                           dataset = cms.untracked.PSet(
                                              dataTier = cms.untracked.string(theTier),
                                              filterName = cms.untracked.string(theFilterName))
                                           )
                 if not theSelectEvent and hasattr(self.process,'generation_step') and theStreamType!='LHE':
                     output.SelectEvents = cms.untracked.PSet(SelectEvents = cms.vstring('generation_step'))
                 if not theSelectEvent and hasattr(self.process,'filtering_step'):
                     output.SelectEvents = cms.untracked.PSet(SelectEvents = cms.vstring('filtering_step'))
                 if theSelectEvent:
                     output.SelectEvents =cms.untracked.PSet(SelectEvents = cms.vstring(theSelectEvent))
 
                 if addAlCaSelects:
                     if not hasattr(output,'SelectEvents'):
                         output.SelectEvents=cms.untracked.PSet(SelectEvents=cms.vstring())
                     for alca in self.AlCaPaths:
                         output.SelectEvents.SelectEvents.extend(getattr(self.process,'OutALCARECO'+alca).SelectEvents.SelectEvents)
 
 
                 if hasattr(self.process,theModuleLabel):
                     raise Exception("the current process already has a module "+theModuleLabel+" defined")
                 #print "creating output module ",theModuleLabel
                 setattr(self.process,theModuleLabel,output)
                 outputModule=getattr(self.process,theModuleLabel)
                 setattr(self.process,theModuleLabel+'_step',cms.EndPath(outputModule))
                 path=getattr(self.process,theModuleLabel+'_step')
                 self.schedule.append(path)
 
                 if not self._options.inlineEventContent and hasattr(self.process,theStreamType+"EventContent"):
                     def doNotInlineEventContent(instance,label = "cms.untracked.vstring(process."+theStreamType+"EventContent.outputCommands)"):
                         return label
                     outputModule.outputCommands.__dict__["dumpPython"] = doNotInlineEventContent
                 if theExtraOutputCommands:
                     if not isinstance(theExtraOutputCommands,list):
                         raise Exception("extra ouput command in --option must be a list of strings")
                     if hasattr(self.process,theStreamType+"EventContent"):
                         self.executeAndRemember('process.%s.outputCommands.extend(%s)'%(theModuleLabel,theExtraOutputCommands))
                     else:
                         outputModule.outputCommands.extend(theExtraOutputCommands)
 
                 result+="\nprocess."+theModuleLabel+" = "+outputModule.dumpPython()
 
             ##ends the --output options model
             return result
 
         streamTypes=self._options.eventcontent.split(',')
         tiers=self._options.datatier.split(',')
         if not self._options.outputDefinition and len(streamTypes)!=len(tiers):
             raise Exception("number of event content arguments does not match number of datatier arguments")
 
         # if the only step is alca we don't need to put in an output
         if self._options.step.split(',')[0].split(':')[0] == 'ALCA':
             return "\n"
 
         for i,(streamType,tier) in enumerate(zip(streamTypes,tiers)):
             if streamType=='': continue
             if streamType == 'ALCARECO' and not 'ALCAPRODUCER' in self._options.step: continue
             if streamType=='DQMIO': streamType='DQM'
             eventContent=streamType
             ## override streamType to eventContent in case NANOEDM
             if streamType == "NANOEDMAOD" :
                 eventContent = "NANOAOD"
             elif streamType == "NANOEDMAODSIM" :
                 eventContent = "NANOAODSIM"
             theEventContent = getattr(self.process, eventContent+"EventContent")
             if i==0:
                 theFileName=self._options.outfile_name
                 theFilterName=self._options.filtername
             else:
                 theFileName=self._options.outfile_name.replace('.root','_in'+streamType+'.root')
                 theFilterName=self._options.filtername
             CppType='PoolOutputModule'
             if self._options.timeoutOutput:
                 CppType='TimeoutPoolOutputModule'
             if streamType=='DQM' and tier=='DQMIO': CppType='DQMRootOutputModule'
             if "NANOAOD" in streamType : CppType='NanoAODOutputModule'
             output = cms.OutputModule(CppType,
                                       theEventContent,
                                       fileName = cms.untracked.string(theFileName),
                                       dataset = cms.untracked.PSet(dataTier = cms.untracked.string(tier),
                                                                    filterName = cms.untracked.string(theFilterName)
                                                                    )
                                       )
             if hasattr(self.process,"generation_step") and streamType!='LHE':
                 output.SelectEvents = cms.untracked.PSet(SelectEvents = cms.vstring('generation_step'))
             if hasattr(self.process,"filtering_step"):
                 output.SelectEvents = cms.untracked.PSet(SelectEvents = cms.vstring('filtering_step'))
 
             if streamType=='ALCARECO':
                 output.dataset.filterName = cms.untracked.string('StreamALCACombined')
 
             if "MINIAOD" in streamType:
                 from PhysicsTools.PatAlgos.slimming.miniAOD_tools import miniAOD_customizeOutput
                 miniAOD_customizeOutput(output)
 
             outputModuleName=streamType+'output'
             setattr(self.process,outputModuleName,output)
             outputModule=getattr(self.process,outputModuleName)
             setattr(self.process,outputModuleName+'_step',cms.EndPath(outputModule))
             path=getattr(self.process,outputModuleName+'_step')
             self.schedule.append(path)
 
             if self._options.outputCommands and streamType!='DQM':
                 for evct in self._options.outputCommands.split(','):
                     if not evct: continue
                     self.executeAndRemember("process.%s.outputCommands.append('%s')"%(outputModuleName,evct.strip()))
 
             if not self._options.inlineEventContent:
                 tmpstreamType=streamType
                 if "NANOEDM" in tmpstreamType :
                     tmpstreamType=tmpstreamType.replace("NANOEDM","NANO")
                 def doNotInlineEventContent(instance,label = "process."+tmpstreamType+"EventContent.outputCommands"):
                     return label
                 outputModule.outputCommands.__dict__["dumpPython"] = doNotInlineEventContent
 
             result+="\nprocess."+outputModuleName+" = "+outputModule.dumpPython()
 
         return result
 

def ConfigBuilder.ConfigBuilder.addSource ( self )

Here the source is built. Priority: file, generator

Definition at line 373 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder._options, ConfigBuilder.filesFromDASQuery(), ConfigBuilder.filesFromList(), createfilelist.int, edm.print(), split, and ConfigBuilder.ConfigBuilder.stepMap.

Referenced by ConfigBuilder.ConfigBuilder.prepare().

     def addSource(self):
         """Here the source is built. Priority: file, generator"""
         self.addedObjects.append(("Input source","source"))
 
         def filesFromOption(self):
             for entry in self._options.filein.split(','):
                 print("entry",entry)
                 if entry.startswith("filelist:"):
                     filesFromList(entry[9:],self.process.source)
                 elif entry.startswith("dbs:") or entry.startswith("das:"):
                     filesFromDASQuery('file dataset = %s'%(entry[4:]),self._options.dasoption,self.process.source)
                 else:
                     self.process.source.fileNames.append(self._options.dirin+entry)
             if self._options.secondfilein:
                 if not hasattr(self.process.source,"secondaryFileNames"):
                     raise Exception("--secondfilein not compatible with "+self._options.filetype+"input type")
                 for entry in self._options.secondfilein.split(','):
                     print("entry",entry)
                     if entry.startswith("filelist:"):
                         self.process.source.secondaryFileNames.extend((filesFromList(entry[9:]))[0])
                     elif entry.startswith("dbs:") or entry.startswith("das:"):
                         self.process.source.secondaryFileNames.extend((filesFromDASQuery('file dataset = %s'%(entry[4:]),self._options.dasoption))[0])
                     else:
                         self.process.source.secondaryFileNames.append(self._options.dirin+entry)
 
         if self._options.filein or self._options.dasquery:
             if self._options.filetype == "EDM":
                 self.process.source=cms.Source("PoolSource",
                                                fileNames = cms.untracked.vstring(),
                                                secondaryFileNames= cms.untracked.vstring())
                 filesFromOption(self)
             elif self._options.filetype == "DAT":
                 self.process.source=cms.Source("NewEventStreamFileReader",fileNames = cms.untracked.vstring())
                 filesFromOption(self)
             elif self._options.filetype == "LHE":
                 self.process.source=cms.Source("LHESource", fileNames = cms.untracked.vstring())
                 if self._options.filein.startswith("lhe:"):
                     #list the article directory automatically
                     args=self._options.filein.split(':')
                     article=args[1]
                     print('LHE input from article ',article)
                     location='/store/lhe/'
                     import os
                     textOfFiles=os.popen('cmsLHEtoEOSManager.py -l '+article)
                     for line in textOfFiles:
                         for fileName in [x for x in line.split() if '.lhe' in x]:
                             self.process.source.fileNames.append(location+article+'/'+fileName)
                     #check first if list of LHE files is loaded (not empty)
                     if len(line)<2:
                         print('Issue to load LHE files, please check and try again.')
                         sys.exit(-1)
                     #Additional check to protect empty fileNames in process.source
                     if len(self.process.source.fileNames)==0:
                         print('Issue with empty filename, but can pass line check')
                         sys.exit(-1)
                     if len(args)>2:
                         self.process.source.skipEvents = cms.untracked.uint32(int(args[2]))
                 else:
                     filesFromOption(self)
 
             elif self._options.filetype == "DQM":
                 self.process.source=cms.Source("DQMRootSource",
                                                fileNames = cms.untracked.vstring())
                 filesFromOption(self)
 
             elif self._options.filetype == "DQMDAQ":
                 # FIXME: how to configure it if there are no input files specified?
                 self.process.source=cms.Source("DQMStreamerReader")
 
 
             if ('HARVESTING' in self.stepMap.keys() or 'ALCAHARVEST' in self.stepMap.keys()) and (not self._options.filetype == "DQM"):
                 self.process.source.processingMode = cms.untracked.string("RunsAndLumis")
 
         if self._options.dasquery!='':
             self.process.source=cms.Source("PoolSource", fileNames = cms.untracked.vstring(),secondaryFileNames = cms.untracked.vstring())
             filesFromDASQuery(self._options.dasquery,self._options.dasoption,self.process.source)
 
             if ('HARVESTING' in self.stepMap.keys() or 'ALCAHARVEST' in self.stepMap.keys()) and (not self._options.filetype == "DQM"):
                 self.process.source.processingMode = cms.untracked.string("RunsAndLumis")
 
         ##drop LHEXMLStringProduct on input to save memory if appropriate
         if 'GEN' in self.stepMap.keys() and not self._options.filetype == "LHE":
             if self._options.inputCommands:
                 self._options.inputCommands+=',drop LHEXMLStringProduct_*_*_*,'
             else:
                 self._options.inputCommands='keep *, drop LHEXMLStringProduct_*_*_*,'
 
         if self.process.source and self._options.inputCommands and not self._options.filetype == "LHE":
             if not hasattr(self.process.source,'inputCommands'): self.process.source.inputCommands=cms.untracked.vstring()
             for command in self._options.inputCommands.split(','):
                 # remove whitespace around the keep/drop statements
                 command = command.strip()
                 if command=='': continue
                 self.process.source.inputCommands.append(command)
             if not self._options.dropDescendant:
                 self.process.source.dropDescendantsOfDroppedBranches = cms.untracked.bool(False)
 
         if self._options.lumiToProcess:
             import FWCore.PythonUtilities.LumiList as LumiList
             self.process.source.lumisToProcess = cms.untracked.VLuminosityBlockRange( LumiList.LumiList(self._options.lumiToProcess).getCMSSWString().split(',') )
 
         if 'GEN' in self.stepMap.keys() or 'LHE' in self.stepMap or (not self._options.filein and hasattr(self._options, "evt_type")):
             if self.process.source is None:
                 self.process.source=cms.Source("EmptySource")
 
         # modify source in case of run-dependent MC
         self.runsAndWeights=None
         if self._options.runsAndWeightsForMC or self._options.runsScenarioForMC :
             if not self._options.isMC :
                 raise Exception("options --runsAndWeightsForMC and --runsScenarioForMC are only valid for MC")
             if self._options.runsAndWeightsForMC:
                 self.runsAndWeights = eval(self._options.runsAndWeightsForMC)
             else:
                 from Configuration.StandardSequences.RunsAndWeights import RunsAndWeights
                 if isinstance(RunsAndWeights[self._options.runsScenarioForMC], str):
                     __import__(RunsAndWeights[self._options.runsScenarioForMC])
                     self.runsAndWeights = sys.modules[RunsAndWeights[self._options.runsScenarioForMC]].runProbabilityDistribution
                 else:
                     self.runsAndWeights = RunsAndWeights[self._options.runsScenarioForMC]
 
         if self.runsAndWeights:
             import SimGeneral.Configuration.ThrowAndSetRandomRun as ThrowAndSetRandomRun
             ThrowAndSetRandomRun.throwAndSetRandomRun(self.process.source,self.runsAndWeights)
             self.additionalCommands.append('import SimGeneral.Configuration.ThrowAndSetRandomRun as ThrowAndSetRandomRun')
             self.additionalCommands.append('ThrowAndSetRandomRun.throwAndSetRandomRun(process.source,%s)'%(self.runsAndWeights))
 
         return
 

def ConfigBuilder.ConfigBuilder.addStandardSequences ( self )

Add selected standard sequences to the process

Definition at line 683 of file ConfigBuilder.py.

References TriggerAnalyzer.__str__(), Mixing.defineMixing(), ConfigBuilder.ConfigBuilder.executeAndRemember(), ConfigBuilder.filesFromDASQuery(), ConfigBuilder.filesFromList(), ConfigBuilder.ConfigBuilder.GeometryCFF, ConfigBuilder.ConfigBuilder.geometryDBLabel, join(), ConfigBuilder.ConfigBuilder.loadAndRemember(), ConfigBuilder.ConfigBuilder.magFieldCFF, edm.print(), ConfigBuilder.ConfigBuilder.SimGeometryCFF, ConfigBuilder.ConfigBuilder.stepKeys, and ConfigBuilder.ConfigBuilder.stepMap.

Referenced by ConfigBuilder.ConfigBuilder.prepare().

     def addStandardSequences(self):
         """
         Add selected standard sequences to the process
         """
         # load the pile up file
         if self._options.pileup:
             pileupSpec=self._options.pileup.split(',')[0]
 
             # Does the requested pile-up scenario exist?
             from Configuration.StandardSequences.Mixing import Mixing,defineMixing
             if not pileupSpec in Mixing and '.' not in pileupSpec and 'file:' not in pileupSpec:
                 message = pileupSpec+' is not a know mixing scenario:\n available are: '+'\n'.join(Mixing.keys())
                 raise Exception(message)
 
             # Put mixing parameters in a dictionary
             if '.' in pileupSpec:
                 mixingDict={'file':pileupSpec}
             elif pileupSpec.startswith('file:'):
                 mixingDict={'file':pileupSpec[5:]}
             else:
                 import copy
                 mixingDict=copy.copy(Mixing[pileupSpec])
             if len(self._options.pileup.split(','))>1:
                 mixingDict.update(eval(self._options.pileup[self._options.pileup.find(',')+1:]))
 
             # Load the pu cfg file corresponding to the requested pu scenario
             if 'file:' in pileupSpec:
                 #the file is local
                 self.process.load(mixingDict['file'])
                 print("inlining mixing module configuration")
                 self._options.inlineObjets+=',mix'
             else:
                 self.loadAndRemember(mixingDict['file'])
 
             mixingDict.pop('file')
             if not "DATAMIX" in self.stepMap.keys(): # when DATAMIX is present, pileup_input refers to pre-mixed GEN-RAW
                 if self._options.pileup_input:
                     if self._options.pileup_input.startswith('dbs:') or self._options.pileup_input.startswith('das:'):
                         mixingDict['F']=filesFromDASQuery('file dataset = %s'%(self._options.pileup_input[4:],),self._options.pileup_dasoption)[0]
                     elif self._options.pileup_input.startswith("filelist:"):
                         mixingDict['F']=(filesFromList(self._options.pileup_input[9:]))[0]
                     else:
                         mixingDict['F']=self._options.pileup_input.split(',')
                 specialization=defineMixing(mixingDict)
                 for command in specialization:
                     self.executeAndRemember(command)
                 if len(mixingDict)!=0:
                     raise Exception('unused mixing specification: '+mixingDict.keys().__str__())
 
 
         # load the geometry file
         try:
             if len(self.stepMap):
                 self.loadAndRemember(self.GeometryCFF)
                 if ('SIM' in self.stepMap or 'reSIM' in self.stepMap) and not self._options.fast:
                     self.loadAndRemember(self.SimGeometryCFF)
                     if self.geometryDBLabel:
                         self.executeAndRemember('process.XMLFromDBSource.label = cms.string("%s")'%(self.geometryDBLabel))
         except ImportError:
             print("Geometry option",self._options.geometry,"unknown.")
             raise
 
         if len(self.stepMap):
             self.loadAndRemember(self.magFieldCFF)
 
         for stepName in self.stepKeys:
             stepSpec = self.stepMap[stepName]
             print("Step:", stepName,"Spec:",stepSpec)
             if stepName.startswith('re'):
                 ##add the corresponding input content
                 if stepName[2:] not in self._options.donotDropOnInput:
                     self._options.inputEventContent='%s,%s'%(stepName.upper(),self._options.inputEventContent)
                 stepName=stepName[2:]
             if stepSpec=="":
                 getattr(self,"prepare_"+stepName)(sequence = getattr(self,stepName+"DefaultSeq"))
             elif isinstance(stepSpec, list):
                 getattr(self,"prepare_"+stepName)(sequence = '+'.join(stepSpec))
             elif isinstance(stepSpec, tuple):
                 getattr(self,"prepare_"+stepName)(sequence = ','.join([stepSpec[1],'+'.join(stepSpec[0])]))
             else:
                 raise ValueError("Invalid step definition")
 
         if self._options.restoreRNDSeeds!=False:
             #it is either True, or a process name
             if self._options.restoreRNDSeeds==True:
                 self.executeAndRemember('process.RandomNumberGeneratorService.restoreStateLabel=cms.untracked.string("randomEngineStateProducer")')
             else:
                 self.executeAndRemember('process.RandomNumberGeneratorService.restoreStateTag=cms.untracked.InputTag("randomEngineStateProducer","","%s")'%(self._options.restoreRNDSeeds))
             if self._options.inputEventContent or self._options.inputCommands:
                 if self._options.inputCommands:
                     self._options.inputCommands+='keep *_randomEngineStateProducer_*_*,'
                 else:
                     self._options.inputCommands='keep *_randomEngineStateProducer_*_*,'
 
 

def ConfigBuilder.ConfigBuilder.build_production_info	(	self,
		evt_type,
		evtnumber
	)

Add useful info for the production.

Definition at line 2055 of file ConfigBuilder.py.

References str.

Referenced by ConfigBuilder.ConfigBuilder.prepare().

     def build_production_info(self, evt_type, evtnumber):
         """ Add useful info for the production. """
         self.process.configurationMetadata=cms.untracked.PSet\
                                             (version=cms.untracked.string("$Revision: 1.19 $"),
                                              name=cms.untracked.string("Applications"),
                                              annotation=cms.untracked.string(evt_type+ " nevts:"+str(evtnumber))
                                              )
 
         self.addedObjects.append(("Production Info","configurationMetadata"))
 
 

def ConfigBuilder.ConfigBuilder.completeInputCommand ( self )

Definition at line 778 of file ConfigBuilder.py.

References DTT0WireWorkflow.DTT0WireWorkflow.process, DTVdriftWorkflow.DTvdriftWorkflow.process, DTTtrigWorkflow.DTttrigWorkflow.process, DTWorkflow.DTWorkflow.process, and ConfigBuilder.ConfigBuilder.process.

Referenced by ConfigBuilder.ConfigBuilder.prepare().

     def completeInputCommand(self):
         if self._options.inputEventContent:
             import copy
             def dropSecondDropStar(iec):
                 #drop occurence of 'drop *' in the list
                 count=0
                 for item in iec:
                     if item=='drop *':
                         if count!=0:
                             iec.remove(item)
                         count+=1
 
             ## allow comma separated input eventcontent
             if not hasattr(self.process.source,'inputCommands'): self.process.source.inputCommands=cms.untracked.vstring()
             for evct in self._options.inputEventContent.split(','):
                 if evct=='': continue
                 theEventContent = getattr(self.process, evct+"EventContent")
                 if hasattr(theEventContent,'outputCommands'):
                     self.process.source.inputCommands.extend(copy.copy(theEventContent.outputCommands))
                 if hasattr(theEventContent,'inputCommands'):
                     self.process.source.inputCommands.extend(copy.copy(theEventContent.inputCommands))
 
             dropSecondDropStar(self.process.source.inputCommands)
 
             if not self._options.dropDescendant:
                 self.process.source.dropDescendantsOfDroppedBranches = cms.untracked.bool(False)
 
 
         return
 

def ConfigBuilder.ConfigBuilder.create_process ( self )

Definition at line 2066 of file ConfigBuilder.py.

     def create_process(self):
         self.pythonCfgCode =  "# Auto generated configuration file\n"
         self.pythonCfgCode += "# using: \n# "+__version__[1:-1]+"\n# "+__source__[1:-1]+'\n'
         self.pythonCfgCode += "# with command line options: "+self._options.arguments+'\n'
         self.pythonCfgCode += "import FWCore.ParameterSet.Config as cms\n\n"
 
         # now set up the modifies
         modifiers=[]
         modifierStrings=[]
         modifierImports=[]
 
         if hasattr(self._options,"era") and self._options.era :
         # Multiple eras can be specified in a comma seperated list
             from Configuration.StandardSequences.Eras import eras
             for requestedEra in self._options.era.split(",") :
                 modifierStrings.append(requestedEra)
                 modifierImports.append(eras.pythonCfgLines[requestedEra])
                 modifiers.append(getattr(eras,requestedEra))
 
 
         if hasattr(self._options,"procModifiers") and self._options.procModifiers:
             import importlib
             thingsImported=[]
             for pm in self._options.procModifiers.split(','):
                 modifierStrings.append(pm)
                 modifierImports.append('from Configuration.ProcessModifiers.'+pm+'_cff import '+pm)
                 modifiers.append(getattr(importlib.import_module('Configuration.ProcessModifiers.'+pm+'_cff'),pm))
 
         self.pythonCfgCode += '\n'.join(modifierImports)+'\n\n'
         self.pythonCfgCode += "process = cms.Process('"+self._options.name+"'" # Start of the line, finished after the loop
 
 
         if len(modifierStrings)>0:
             self.pythonCfgCode+= ','+','.join(modifierStrings)
         self.pythonCfgCode+=')\n\n'
 
         #yes, the cfg code gets out of sync here if a process is passed in. That could be fixed in the future
         #assuming there is some way for the fwk to get the list of modifiers (and their stringified name)
         if self.process == None:
             if len(modifiers)>0:
                 self.process = cms.Process(self._options.name,*modifiers)
             else:
                 self.process = cms.Process(self._options.name)
 
 
 
 

def ConfigBuilder.ConfigBuilder.define_Configs ( self )

Definition at line 911 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.loadAndRemember(), edm.print(), and ConfigBuilder.ConfigBuilder.stepMap.

     def define_Configs(self):
         if len(self.stepMap):
             self.loadAndRemember('Configuration/StandardSequences/Services_cff')
         if self._options.particleTable not in defaultOptions.particleTableList:
             print('Invalid particle table provided. Options are:')
             print(defaultOptions.particleTable)
             sys.exit(-1)
         else:
             if len(self.stepMap):
                 self.loadAndRemember('SimGeneral.HepPDTESSource.'+self._options.particleTable+'_cfi')
 
         self.loadAndRemember('FWCore/MessageService/MessageLogger_cfi')
 
         self.ALCADefaultCFF="Configuration/StandardSequences/AlCaRecoStreams_cff"
         self.GENDefaultCFF="Configuration/StandardSequences/Generator_cff"
         self.SIMDefaultCFF="Configuration/StandardSequences/Sim_cff"
         self.DIGIDefaultCFF="Configuration/StandardSequences/Digi_cff"
         self.DIGI2RAWDefaultCFF="Configuration/StandardSequences/DigiToRaw_cff"
         self.L1EMDefaultCFF='Configuration/StandardSequences/SimL1Emulator_cff'
         self.L1MENUDefaultCFF="Configuration/StandardSequences/L1TriggerDefaultMenu_cff"
         self.HLTDefaultCFF="Configuration/StandardSequences/HLTtable_cff"
         self.RAW2DIGIDefaultCFF="Configuration/StandardSequences/RawToDigi_Data_cff"
         if self._options.isRepacked: self.RAW2DIGIDefaultCFF="Configuration/StandardSequences/RawToDigi_DataMapper_cff"
         self.L1RecoDefaultCFF="Configuration/StandardSequences/L1Reco_cff"
         self.L1TrackTriggerDefaultCFF="Configuration/StandardSequences/L1TrackTrigger_cff"
         self.RECODefaultCFF="Configuration/StandardSequences/Reconstruction_Data_cff"
         self.RECOSIMDefaultCFF="Configuration/StandardSequences/RecoSim_cff"
         self.PATDefaultCFF="Configuration/StandardSequences/PAT_cff"
         self.NANODefaultCFF="PhysicsTools/NanoAOD/nano_cff"
         self.EIDefaultCFF=None
         self.SKIMDefaultCFF="Configuration/StandardSequences/Skims_cff"
         self.POSTRECODefaultCFF="Configuration/StandardSequences/PostRecoGenerator_cff"
         self.VALIDATIONDefaultCFF="Configuration/StandardSequences/Validation_cff"
         self.L1HwValDefaultCFF = "Configuration/StandardSequences/L1HwVal_cff"
         self.DQMOFFLINEDefaultCFF="DQMOffline/Configuration/DQMOffline_cff"
         self.HARVESTINGDefaultCFF="Configuration/StandardSequences/Harvesting_cff"
         self.ALCAHARVESTDefaultCFF="Configuration/StandardSequences/AlCaHarvesting_cff"
         self.ENDJOBDefaultCFF="Configuration/StandardSequences/EndOfProcess_cff"
         self.ConditionsDefaultCFF = "Configuration/StandardSequences/FrontierConditions_GlobalTag_cff"
         self.CFWRITERDefaultCFF = "Configuration/StandardSequences/CrossingFrameWriter_cff"
         self.REPACKDefaultCFF="Configuration/StandardSequences/DigiToRaw_Repack_cff"
 
         if "DATAMIX" in self.stepMap.keys():
             self.DATAMIXDefaultCFF="Configuration/StandardSequences/DataMixer"+self._options.datamix+"_cff"
             self.DIGIDefaultCFF="Configuration/StandardSequences/DigiDM_cff"
             self.DIGI2RAWDefaultCFF="Configuration/StandardSequences/DigiToRawDM_cff"
             self.L1EMDefaultCFF='Configuration/StandardSequences/SimL1EmulatorDM_cff'
 
         self.ALCADefaultSeq=None
         self.LHEDefaultSeq='externalLHEProducer'
         self.GENDefaultSeq='pgen'
         self.SIMDefaultSeq='psim'
         self.DIGIDefaultSeq='pdigi'
         self.DATAMIXDefaultSeq=None
         self.DIGI2RAWDefaultSeq='DigiToRaw'
         self.HLTDefaultSeq='GRun'
         self.L1DefaultSeq=None
         self.L1REPACKDefaultSeq='GT'
         self.HARVESTINGDefaultSeq=None
         self.ALCAHARVESTDefaultSeq=None
         self.CFWRITERDefaultSeq=None
         self.RAW2DIGIDefaultSeq='RawToDigi'
         self.L1RecoDefaultSeq='L1Reco'
         self.L1TrackTriggerDefaultSeq='L1TrackTrigger'
         if self._options.fast or ('RAW2DIGI' in self.stepMap and 'RECO' in self.stepMap):
             self.RECODefaultSeq='reconstruction'
         else:
             self.RECODefaultSeq='reconstruction_fromRECO'
         self.RECOSIMDefaultSeq='recosim'
         self.EIDefaultSeq='top'
         self.POSTRECODefaultSeq=None
         self.L1HwValDefaultSeq='L1HwVal'
         self.DQMDefaultSeq='DQMOffline'
         self.VALIDATIONDefaultSeq=''
         self.ENDJOBDefaultSeq='endOfProcess'
         self.REPACKDefaultSeq='DigiToRawRepack'
         self.PATDefaultSeq='miniAOD'
         self.PATGENDefaultSeq='miniGEN'
         self.NANODefaultSeq='nanoSequence'
 
         self.EVTCONTDefaultCFF="Configuration/EventContent/EventContent_cff"
 
         if not self._options.beamspot:
             self._options.beamspot=VtxSmearedDefaultKey
 
         # if its MC then change the raw2digi
         if self._options.isMC==True:
             self.RAW2DIGIDefaultCFF="Configuration/StandardSequences/RawToDigi_cff"
             self.RECODefaultCFF="Configuration/StandardSequences/Reconstruction_cff"
             self.PATDefaultCFF="Configuration/StandardSequences/PATMC_cff"
             self.PATGENDefaultCFF="Configuration/StandardSequences/PATGEN_cff"
             self.DQMOFFLINEDefaultCFF="DQMOffline/Configuration/DQMOfflineMC_cff"
             self.ALCADefaultCFF="Configuration/StandardSequences/AlCaRecoStreamsMC_cff"
             self.NANODefaultSeq='nanoSequenceMC'
         else:
             self._options.beamspot = None
 
         #patch for gen, due to backward incompatibility
         if 'reGEN' in self.stepMap:
             self.GENDefaultSeq='fixGenInfo'
 
         if self._options.scenario=='cosmics':
             self._options.pileup='Cosmics'
             self.DIGIDefaultCFF="Configuration/StandardSequences/DigiCosmics_cff"
             self.RECODefaultCFF="Configuration/StandardSequences/ReconstructionCosmics_cff"
             self.SKIMDefaultCFF="Configuration/StandardSequences/SkimsCosmics_cff"
             self.EVTCONTDefaultCFF="Configuration/EventContent/EventContentCosmics_cff"
             self.VALIDATIONDefaultCFF="Configuration/StandardSequences/ValidationCosmics_cff"
             self.DQMOFFLINEDefaultCFF="DQMOffline/Configuration/DQMOfflineCosmics_cff"
             if self._options.isMC==True:
                 self.DQMOFFLINEDefaultCFF="DQMOffline/Configuration/DQMOfflineCosmicsMC_cff"
             self.HARVESTINGDefaultCFF="Configuration/StandardSequences/HarvestingCosmics_cff"
             self.RECODefaultSeq='reconstructionCosmics'
             self.DQMDefaultSeq='DQMOfflineCosmics'
 
         if self._options.scenario=='HeavyIons':
             if not self._options.beamspot:
                 self._options.beamspot=VtxSmearedHIDefaultKey
             self.HLTDefaultSeq = 'HIon'
             self.VALIDATIONDefaultCFF="Configuration/StandardSequences/ValidationHeavyIons_cff"
             self.VALIDATIONDefaultSeq=''
             self.EVTCONTDefaultCFF="Configuration/EventContent/EventContentHeavyIons_cff"
             self.RECODefaultCFF="Configuration/StandardSequences/ReconstructionHeavyIons_cff"
             self.RECODefaultSeq='reconstructionHeavyIons'
             self.ALCADefaultCFF = "Configuration/StandardSequences/AlCaRecoStreamsHeavyIons_cff"
             self.DQMOFFLINEDefaultCFF="DQMOffline/Configuration/DQMOfflineHeavyIons_cff"
             self.DQMDefaultSeq='DQMOfflineHeavyIons'
             self.SKIMDefaultCFF="Configuration/StandardSequences/SkimsHeavyIons_cff"
             self.HARVESTINGDefaultCFF="Configuration/StandardSequences/HarvestingHeavyIons_cff"
             if self._options.isMC==True:
                 self.DQMOFFLINEDefaultCFF="DQMOffline/Configuration/DQMOfflineHeavyIonsMC_cff"
 
 
         self.RAW2RECODefaultSeq=','.join([self.RAW2DIGIDefaultSeq,self.RECODefaultSeq])
 
         self.USERDefaultSeq='user'
         self.USERDefaultCFF=None
 
         # the magnetic field
         if self._options.isData:
             if self._options.magField==defaultOptions.magField:
                 print("magnetic field option forced to: AutoFromDBCurrent")
             self._options.magField='AutoFromDBCurrent'
         self.magFieldCFF = 'Configuration/StandardSequences/MagneticField_'+self._options.magField.replace('.','')+'_cff'
         self.magFieldCFF = self.magFieldCFF.replace("__",'_')
 
         # the geometry
         self.GeometryCFF='Configuration/StandardSequences/GeometryRecoDB_cff'
         self.geometryDBLabel=None
         simGeometry=''
         if self._options.fast:
             if 'start' in self._options.conditions.lower():
                 self.GeometryCFF='FastSimulation/Configuration/Geometries_START_cff'
             else:
                 self.GeometryCFF='FastSimulation/Configuration/Geometries_MC_cff'
         else:
             def inGeometryKeys(opt):
                 from Configuration.StandardSequences.GeometryConf import GeometryConf
                 if opt in GeometryConf:
                     return GeometryConf[opt]
                 else:
                     return opt
 
             geoms=self._options.geometry.split(',')
             if len(geoms)==1: geoms=inGeometryKeys(geoms[0]).split(',')
             if len(geoms)==2:
                 #may specify the reco geometry
                 if '/' in geoms[1] or '_cff' in geoms[1]:
                     self.GeometryCFF=geoms[1]
                 else:
                     self.GeometryCFF='Configuration/Geometry/Geometry'+geoms[1]+'_cff'
 
             if (geoms[0].startswith('DB:')):
                 self.SimGeometryCFF='Configuration/StandardSequences/GeometrySimDB_cff'
                 self.geometryDBLabel=geoms[0][3:]
                 print("with DB:")
             else:
                 if '/' in geoms[0] or '_cff' in geoms[0]:
                     self.SimGeometryCFF=geoms[0]
                 else:
                     simGeometry=geoms[0]
                     if self._options.gflash==True:
                         self.SimGeometryCFF='Configuration/Geometry/Geometry'+geoms[0]+'GFlash_cff'
                     else:
                         self.SimGeometryCFF='Configuration/Geometry/Geometry'+geoms[0]+'_cff'
 
         # synchronize the geometry configuration and the FullSimulation sequence to be used
         if simGeometry not in defaultOptions.geometryExtendedOptions:
             self.SIMDefaultCFF="Configuration/StandardSequences/SimIdeal_cff"
 
         if self._options.scenario=='nocoll' or self._options.scenario=='cosmics':
             self.SIMDefaultCFF="Configuration/StandardSequences/SimNOBEAM_cff"
             self._options.beamspot='NoSmear'
 
         # fastsim requires some changes to the default cff files and sequences
         if self._options.fast:
             self.SIMDefaultCFF = 'FastSimulation.Configuration.SimIdeal_cff'
             self.RECODefaultCFF= 'FastSimulation.Configuration.Reconstruction_AftMix_cff'
             self.RECOBEFMIXDefaultCFF = 'FastSimulation.Configuration.Reconstruction_BefMix_cff'
             self.RECOBEFMIXDefaultSeq = 'reconstruction_befmix'
             self.NANODefaultSeq = 'nanoSequenceFS'
             self.DQMOFFLINEDefaultCFF="FastSimulation.Configuration.DQMOfflineMC_cff"
 
         # Mixing
         if self._options.pileup=='default':
             from Configuration.StandardSequences.Mixing import MixingDefaultKey
             self._options.pileup=MixingDefaultKey
 
 
         #not driven by a default cff anymore
         if self._options.isData:
             self._options.pileup=None
 
 
         self.REDIGIDefaultSeq=self.DIGIDefaultSeq
 

def ConfigBuilder.ConfigBuilder.executeAndRemember	(	self,
		command
	)

helper routine to remember replace statements

Definition at line 328 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.addCustomiseCmdLine(), ConfigBuilder.ConfigBuilder.addOutput(), ConfigBuilder.ConfigBuilder.addStandardSequences(), ConfigBuilder.ConfigBuilder.prepare_ALCAHARVEST(), ConfigBuilder.ConfigBuilder.prepare_DATAMIX(), ConfigBuilder.ConfigBuilder.prepare_DIGI(), ConfigBuilder.ConfigBuilder.prepare_GEN(), ConfigBuilder.ConfigBuilder.prepare_HLT(), ConfigBuilder.ConfigBuilder.prepare_SIM(), and ConfigBuilder.ConfigBuilder.prepare_VALIDATION().

     def executeAndRemember(self, command):
         """helper routine to remember replace statements"""
         self.additionalCommands.append(command)
         if not command.strip().startswith("#"):
         # substitute: process.foo = process.bar -> self.process.foo = self.process.bar
             import re
             exec(re.sub(r"([^a-zA-Z_0-9]|^)(process)([^a-zA-Z_0-9])",r"\1self.process\3",command))
             #exec(command.replace("process.","self.process."))
 

def ConfigBuilder.ConfigBuilder.expandMapping	(	self,
		seqList,
		mapping,
		index = `None`
	)

Definition at line 1916 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_ALCA(), ConfigBuilder.ConfigBuilder.prepare_ALCAHARVEST(), ConfigBuilder.ConfigBuilder.prepare_DQM(), ConfigBuilder.ConfigBuilder.prepare_SKIM(), and ConfigBuilder.ConfigBuilder.prepare_VALIDATION().

     def expandMapping(self,seqList,mapping,index=None):
         maxLevel=20
         level=0
         while '@' in repr(seqList) and level<maxLevel:
             level+=1
             for specifiedCommand in seqList:
                 if specifiedCommand.startswith('@'):
                     location=specifiedCommand[1:]
                     if not location in mapping:
                         raise Exception("Impossible to map "+location+" from "+repr(mapping))
                     mappedTo=mapping[location]
                     if index!=None:
                         mappedTo=mappedTo[index]
                     seqList.remove(specifiedCommand)
                     seqList.extend(mappedTo.split('+'))
                     break;
         if level==maxLevel:
             raise Exception("Could not fully expand "+repr(seqList)+" from "+repr(mapping))
 

def ConfigBuilder.ConfigBuilder.finalizeFastSimHLT ( self )

Definition at line 2050 of file ConfigBuilder.py.

     def finalizeFastSimHLT(self):
         self.process.reconstruction = cms.Path(self.process.reconstructionWithFamos)
         self.schedule.append(self.process.reconstruction)
 
 

def ConfigBuilder.ConfigBuilder.load	(	self,
		includeFile
	)

Definition at line 314 of file ConfigBuilder.py.

Referenced by MatrixToProcess.MatrixToProcess.getProcess(), MatrixToProcess.MatrixToProcess.listAll(), and ConfigBuilder.ConfigBuilder.prepare_FILTER().

     def load(self,includeFile):
         includeFile = includeFile.replace('/','.')
         self.process.load(includeFile)
         return sys.modules[includeFile]
 

def ConfigBuilder.ConfigBuilder.loadAndRemember	(	self,
		includeFile
	)

helper routine to load am memorize imports

Definition at line 319 of file ConfigBuilder.py.

     def loadAndRemember(self, includeFile):
         """helper routine to load am memorize imports"""
         # we could make the imports a on-the-fly data method of the process instance itself
         # not sure if the latter is a good idea
         includeFile = includeFile.replace('/','.')
         self.imports.append(includeFile)
         self.process.load(includeFile)
         return sys.modules[includeFile]
 

def ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF	(	self,
		sequence,
		defaultCFF
	)

Definition at line 1193 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.loadAndRemember(), and edm.print().

     def loadDefaultOrSpecifiedCFF(self, sequence,defaultCFF):
         if ( len(sequence.split('.'))==1 ):
             l=self.loadAndRemember(defaultCFF)
         elif ( len(sequence.split('.'))==2 ):
             l=self.loadAndRemember(sequence.split('.')[0])
             sequence=sequence.split('.')[1]
         else:
             print("sub sequence configuration must be of the form dir/subdir/cff.a+b+c or cff.a")
             print(sequence,"not recognized")
             raise
         return l
 

def ConfigBuilder.ConfigBuilder.prepare	(	self,
		doChecking = `False`
	)

Prepare the configuration string and add missing pieces.

Definition at line 2113 of file ConfigBuilder.py.

     def prepare(self, doChecking = False):
         """ Prepare the configuration string and add missing pieces."""
 
         self.loadAndRemember(self.EVTCONTDefaultCFF)  #load the event contents regardless
         self.addMaxEvents()
         if self.with_input:
             self.addSource()
         self.addStandardSequences()
         ##adding standard sequences might change the inputEventContent option and therefore needs to be finalized after
         self.completeInputCommand()
         self.addConditions()
 
 
         outputModuleCfgCode=""
         if not 'HARVESTING' in self.stepMap.keys() and not 'ALCAHARVEST' in self.stepMap.keys() and not 'ALCAOUTPUT' in self.stepMap.keys() and self.with_output:
             outputModuleCfgCode=self.addOutput()
 
         self.addCommon()
 
         self.pythonCfgCode += "# import of standard configurations\n"
         for module in self.imports:
             self.pythonCfgCode += ("process.load('"+module+"')\n")
 
         # production info
         if not hasattr(self.process,"configurationMetadata"):
             self.build_production_info(self._options.evt_type, self._options.number)
         else:
             #the PSet was added via a load
             self.addedObjects.append(("Production Info","configurationMetadata"))
 
         self.pythonCfgCode +="\n"
         for comment,object in self.addedObjects:
             if comment!="":
                 self.pythonCfgCode += "\n# "+comment+"\n"
             self.pythonCfgCode += dumpPython(self.process,object)
 
         # dump the output definition
         self.pythonCfgCode += "\n# Output definition\n"
         self.pythonCfgCode += outputModuleCfgCode
 
         # dump all additional outputs (e.g. alca or skim streams)
         self.pythonCfgCode += "\n# Additional output definition\n"
         #I do not understand why the keys are not normally ordered.
         nl=sorted(self.additionalOutputs.keys())
         for name in nl:
             output = self.additionalOutputs[name]
             self.pythonCfgCode += "process.%s = %s" %(name, output.dumpPython())
             tmpOut = cms.EndPath(output)
             setattr(self.process,name+'OutPath',tmpOut)
             self.schedule.append(tmpOut)
 
         # dump all additional commands
         self.pythonCfgCode += "\n# Other statements\n"
         for command in self.additionalCommands:
             self.pythonCfgCode += command + "\n"
 
         #comma separated list of objects that deserve to be inlined in the configuration (typically from a modified config deep down)
         for object in self._options.inlineObjets.split(','):
             if not object:
                 continue
             if not hasattr(self.process,object):
                 print('cannot inline -'+object+'- : not known')
             else:
                 self.pythonCfgCode +='\n'
                 self.pythonCfgCode +=dumpPython(self.process,object)
 
         # dump all paths
         self.pythonCfgCode += "\n# Path and EndPath definitions\n"
         for path in self.process.paths:
             if getattr(self.process,path) not in self.blacklist_paths:
                 self.pythonCfgCode += dumpPython(self.process,path)
 
         for endpath in self.process.endpaths:
             if getattr(self.process,endpath) not in self.blacklist_paths:
                 self.pythonCfgCode += dumpPython(self.process,endpath)
 
         # dump the schedule
         self.pythonCfgCode += "\n# Schedule definition\n"
         result = "process.schedule = cms.Schedule("
 
         # handling of the schedule
         self.process.schedule = cms.Schedule()
         for item in self.schedule:
             if not isinstance(item, cms.Schedule):
                 self.process.schedule.append(item)
             else:
                 self.process.schedule.extend(item)
 
         if hasattr(self.process,"HLTSchedule"):
             beforeHLT = self.schedule[:self.schedule.index(self.process.HLTSchedule)]
             afterHLT = self.schedule[self.schedule.index(self.process.HLTSchedule)+1:]
             pathNames = ['process.'+p.label_() for p in beforeHLT]
             result += ','.join(pathNames)+')\n'
             result += 'process.schedule.extend(process.HLTSchedule)\n'
             pathNames = ['process.'+p.label_() for p in afterHLT]
             result += 'process.schedule.extend(['+','.join(pathNames)+'])\n'
         else:
             pathNames = ['process.'+p.label_() for p in self.schedule]
             result ='process.schedule = cms.Schedule('+','.join(pathNames)+')\n'
 
         self.pythonCfgCode += result
 
         for labelToAssociate in self.labelsToAssociate:
             self.process.schedule.associate(getattr(self.process, labelToAssociate))
             self.pythonCfgCode += 'process.schedule.associate(process.' + labelToAssociate + ')\n'
 
         from PhysicsTools.PatAlgos.tools.helpers import associatePatAlgosToolsTask
         associatePatAlgosToolsTask(self.process)
         self.pythonCfgCode+="from PhysicsTools.PatAlgos.tools.helpers import associatePatAlgosToolsTask\n"
         self.pythonCfgCode+="associatePatAlgosToolsTask(process)\n"
 
         if self._options.nThreads is not "1":
             self.pythonCfgCode +="\n"
             self.pythonCfgCode +="#Setup FWK for multithreaded\n"
             self.pythonCfgCode +="process.options.numberOfThreads=cms.untracked.uint32("+self._options.nThreads+")\n"
             self.pythonCfgCode +="process.options.numberOfStreams=cms.untracked.uint32("+self._options.nStreams+")\n"
             self.pythonCfgCode +="process.options.numberOfConcurrentLuminosityBlocks=cms.untracked.uint32("+self._options.nConcurrentLumis+")\n"
             self.process.options.numberOfThreads=cms.untracked.uint32(int(self._options.nThreads))
             self.process.options.numberOfStreams=cms.untracked.uint32(int(self._options.nStreams))
             self.process.options.numberOfConcurrentLuminosityBlocks=cms.untracked.uint32(int(self._options.nConcurrentLumis))
         #repacked version
         if self._options.isRepacked:
             self.pythonCfgCode +="\n"
             self.pythonCfgCode +="from Configuration.Applications.ConfigBuilder import MassReplaceInputTag\n"
             self.pythonCfgCode +="MassReplaceInputTag(process, new=\"rawDataMapperByLabel\", old=\"rawDataCollector\")\n"
             MassReplaceInputTag(self.process, new="rawDataMapperByLabel", old="rawDataCollector")
 
         # special treatment in case of production filter sequence 2/2
         if self.productionFilterSequence:
             self.pythonCfgCode +='# filter all path with the production filter sequence\n'
             self.pythonCfgCode +='for path in process.paths:\n'
             if len(self.conditionalPaths):
                 self.pythonCfgCode +='\tif not path in %s: continue\n'%str(self.conditionalPaths)
             if len(self.excludedPaths):
                 self.pythonCfgCode +='\tif path in %s: continue\n'%str(self.excludedPaths)
             self.pythonCfgCode +='\tgetattr(process,path).insert(0, process.%s)\n'%(self.productionFilterSequence,)
             pfs = getattr(self.process,self.productionFilterSequence)
             for path in self.process.paths:
                 if not path in self.conditionalPaths: continue
                 if path in self.excludedPaths: continue
                 getattr(self.process,path).insert(0, pfs)
 
 
         # dump customise fragment
         self.pythonCfgCode += self.addCustomise()
 
         if self._options.runUnscheduled:
             # prune and delete paths
             #this is not supporting the blacklist at this point since I do not understand it
             self.pythonCfgCode+="#do not add changes to your config after this point (unless you know what you are doing)\n"
             self.pythonCfgCode+="from FWCore.ParameterSet.Utilities import convertToUnscheduled\n"
             self.pythonCfgCode+="process=convertToUnscheduled(process)\n"
 
             from FWCore.ParameterSet.Utilities import convertToUnscheduled
             self.process=convertToUnscheduled(self.process)
 
             self.pythonCfgCode += self.addCustomise(1)
 
         self.pythonCfgCode += self.addCustomiseCmdLine()
 
         if hasattr(self.process,"logErrorHarvester"):
             #configure logErrorHarvester to wait for same EDProducers to finish as the OutputModules
             self.pythonCfgCode +="\n#Have logErrorHarvester wait for the same EDProducers to finish as those providing data for the OutputModule\n"
             self.pythonCfgCode +="from FWCore.Modules.logErrorHarvester_cff import customiseLogErrorHarvesterUsingOutputCommands\n"
             self.pythonCfgCode +="process = customiseLogErrorHarvesterUsingOutputCommands(process)\n"
             from FWCore.Modules.logErrorHarvester_cff import customiseLogErrorHarvesterUsingOutputCommands
             self.process = customiseLogErrorHarvesterUsingOutputCommands(self.process)
 
         # Temporary hack to put the early delete customization after
         # everything else
         #
         # FIXME: remove when no longer needed
         self.pythonCfgCode += "\n# Add early deletion of temporary data products to reduce peak memory need\n"
         self.pythonCfgCode += "from Configuration.StandardSequences.earlyDeleteSettings_cff import customiseEarlyDelete\n"
         self.pythonCfgCode += "process = customiseEarlyDelete(process)\n"
         self.pythonCfgCode += "# End adding early deletion\n"
         from Configuration.StandardSequences.earlyDeleteSettings_cff import customiseEarlyDelete
         self.process = customiseEarlyDelete(self.process)
 
         imports = cms.specialImportRegistry.getSpecialImports()
         if len(imports) > 0:
             #need to inject this at the top
             index = self.pythonCfgCode.find("import FWCore.ParameterSet.Config")
             #now find the end of line
             index = self.pythonCfgCode.find("\n",index)
             self.pythonCfgCode = self.pythonCfgCode[:index]+ "\n" + "\n".join(imports)+"\n" +self.pythonCfgCode[index:]
 
 
         # make the .io file
 
         if self._options.io:
             #io=open(self._options.python_filename.replace('.py','.io'),'w')
             if not self._options.io.endswith('.io'): self._option.io+='.io'
             io=open(self._options.io,'w')
             ioJson={}
             if hasattr(self.process.source,"fileNames"):
                 if len(self.process.source.fileNames.value()):
                     ioJson['primary']=self.process.source.fileNames.value()
             if hasattr(self.process.source,"secondaryFileNames"):
                 if len(self.process.source.secondaryFileNames.value()):
                     ioJson['secondary']=self.process.source.secondaryFileNames.value()
             if self._options.pileup_input and (self._options.pileup_input.startswith('dbs:') or self._options.pileup_input.startswith('das:')):
                 ioJson['pileup']=self._options.pileup_input[4:]
             for (o,om) in self.process.outputModules_().items():
                 ioJson[o]=om.fileName.value()
             ioJson['GT']=self.process.GlobalTag.globaltag.value()
             if self.productionFilterSequence:
                 ioJson['filter']=self.productionFilterSequence
             import json
             io.write(json.dumps(ioJson))
         return
 

def ConfigBuilder.ConfigBuilder.prepare_ALCA	(	self,
		sequence = `None`,
		workflow = `'full'`
	)

Enrich the process with alca streams

Definition at line 1244 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.ALCADefaultCFF, ConfigBuilder.ConfigBuilder.expandMapping(), and ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF().

Referenced by ConfigBuilder.ConfigBuilder.prepare_ALCAOUTPUT(), and ConfigBuilder.ConfigBuilder.prepare_ALCAPRODUCER().

     def prepare_ALCA(self, sequence = None, workflow = 'full'):
         """ Enrich the process with alca streams """
         alcaConfig=self.loadDefaultOrSpecifiedCFF(sequence,self.ALCADefaultCFF)
         sequence = sequence.split('.')[-1]
 
         # decide which ALCA paths to use
         alcaList = sequence.split("+")
         maxLevel=0
         from Configuration.AlCa.autoAlca import autoAlca
         # support @X from autoAlca.py, and recursion support: i.e T0:@Mu+@EG+...
         self.expandMapping(alcaList,autoAlca)
         self.AlCaPaths=[]
         for name in alcaConfig.__dict__:
             alcastream = getattr(alcaConfig,name)
             shortName = name.replace('ALCARECOStream','')
             if shortName in alcaList and isinstance(alcastream,cms.FilteredStream):
                 output = self.addExtraStream(name,alcastream, workflow = workflow)
                 self.executeAndRemember('process.ALCARECOEventContent.outputCommands.extend(process.OutALCARECO'+shortName+'_noDrop.outputCommands)')
                 self.AlCaPaths.append(shortName)
                 if 'DQM' in alcaList:
                     if not self._options.inlineEventContent and hasattr(self.process,name):
                         self.executeAndRemember('process.' + name + '.outputCommands.append("keep *_MEtoEDMConverter_*_*")')
                     else:
                         output.outputCommands.append("keep *_MEtoEDMConverter_*_*")
 
                 #rename the HLT process name in the alca modules
                 if self._options.hltProcess or 'HLT' in self.stepMap:
                     if isinstance(alcastream.paths,tuple):
                         for path in alcastream.paths:
                             self.renameHLTprocessInSequence(path.label())
                     else:
                         self.renameHLTprocessInSequence(alcastream.paths.label())
 
                 for i in range(alcaList.count(shortName)):
                     alcaList.remove(shortName)
 
             # DQM needs a special handling
             elif name == 'pathALCARECODQM' and 'DQM' in alcaList:
                 path = getattr(alcaConfig,name)
                 self.schedule.append(path)
                 alcaList.remove('DQM')
 
             if isinstance(alcastream,cms.Path):
                 #black list the alca path so that they do not appear in the cfg
                 self.blacklist_paths.append(alcastream)
 
 
         if len(alcaList) != 0:
             available=[]
             for name in alcaConfig.__dict__:
                 alcastream = getattr(alcaConfig,name)
                 if isinstance(alcastream,cms.FilteredStream):
                     available.append(name.replace('ALCARECOStream',''))
             print("The following alcas could not be found "+str(alcaList))
             print("available ",available)
             #print "verify your configuration, ignoring for now"
             raise Exception("The following alcas could not be found "+str(alcaList))
 

def ConfigBuilder.ConfigBuilder.prepare_ALCAHARVEST	(	self,
		sequence = `None`
	)

Enrich the process with AlCaHarvesting step

Definition at line 2010 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.ALCAHARVESTDefaultCFF, ConfigBuilder.ConfigBuilder.executeAndRemember(), ConfigBuilder.ConfigBuilder.expandMapping(), ConfigBuilder.ConfigBuilder.loadAndRemember(), edm.print(), and str.

     def prepare_ALCAHARVEST(self, sequence = None):
         """ Enrich the process with AlCaHarvesting step """
         harvestingConfig = self.loadAndRemember(self.ALCAHARVESTDefaultCFF)
         sequence=sequence.split(".")[-1]
 
         # decide which AlcaHARVESTING paths to use
         harvestingList = sequence.split("+")
 
 
 
         from Configuration.AlCa.autoPCL import autoPCL
         self.expandMapping(harvestingList,autoPCL)
 
         for name in harvestingConfig.__dict__:
             harvestingstream = getattr(harvestingConfig,name)
             if name in harvestingList and isinstance(harvestingstream,cms.Path):
                 self.schedule.append(harvestingstream)
                 if isinstance(getattr(harvestingConfig,"ALCAHARVEST" + name + "_dbOutput"), cms.VPSet) and \
                    isinstance(getattr(harvestingConfig,"ALCAHARVEST" + name + "_metadata"), cms.VPSet):
                     self.executeAndRemember("process.PoolDBOutputService.toPut.extend(process.ALCAHARVEST" + name + "_dbOutput)")
                     self.executeAndRemember("process.pclMetadataWriter.recordsToMap.extend(process.ALCAHARVEST" + name + "_metadata)")
                 else:
                     self.executeAndRemember("process.PoolDBOutputService.toPut.append(process.ALCAHARVEST" + name + "_dbOutput)")
                     self.executeAndRemember("process.pclMetadataWriter.recordsToMap.append(process.ALCAHARVEST" + name + "_metadata)")
                 harvestingList.remove(name)
         # append the common part at the end of the sequence
         lastStep = getattr(harvestingConfig,"ALCAHARVESTDQMSaveAndMetadataWriter")
         self.schedule.append(lastStep)
 
         if len(harvestingList) != 0 and 'dummyHarvesting' not in harvestingList :
             print("The following harvesting could not be found : ", harvestingList)
             raise Exception("The following harvesting could not be found : "+str(harvestingList))
 
 
 

def ConfigBuilder.ConfigBuilder.prepare_ALCAOUTPUT	(	self,
		sequence = `None`
	)

Definition at line 1241 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.prepare_ALCA().

     def prepare_ALCAOUTPUT(self, sequence = None):
         self.prepare_ALCA(sequence, workflow = "output")
 

def ConfigBuilder.ConfigBuilder.prepare_ALCAPRODUCER	(	self,
		sequence = `None`
	)

Definition at line 1238 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.prepare_ALCA().

     def prepare_ALCAPRODUCER(self, sequence = None):
         self.prepare_ALCA(sequence, workflow = "producers")
 

def ConfigBuilder.ConfigBuilder.prepare_CFWRITER	(	self,
		sequence = `None`
	)

Enrich the schedule with the crossing frame writer step

Definition at line 1437 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.CFWRITERDefaultCFF, ConfigBuilder.ConfigBuilder.loadAndRemember(), and ConfigBuilder.ConfigBuilder.scheduleSequence().

     def prepare_CFWRITER(self, sequence = None):
         """ Enrich the schedule with the crossing frame writer step"""
         self.loadAndRemember(self.CFWRITERDefaultCFF)
         self.scheduleSequence('pcfw','cfwriter_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_DATAMIX	(	self,
		sequence = `None`
	)

Enrich the schedule with the digitisation step

Definition at line 1443 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.DATAMIXDefaultCFF, ConfigBuilder.ConfigBuilder.executeAndRemember(), ConfigBuilder.filesFromDASQuery(), ConfigBuilder.filesFromList(), ConfigBuilder.ConfigBuilder.loadAndRemember(), and ConfigBuilder.ConfigBuilder.scheduleSequence().

     def prepare_DATAMIX(self, sequence = None):
         """ Enrich the schedule with the digitisation step"""
         self.loadAndRemember(self.DATAMIXDefaultCFF)
         self.scheduleSequence('pdatamix','datamixing_step')
 
         if self._options.pileup_input:
             theFiles=''
             if self._options.pileup_input.startswith('dbs:') or self._options.pileup_input.startswith('das:'):
                 theFiles=filesFromDASQuery('file dataset = %s'%(self._options.pileup_input[4:],),self._options.pileup_dasoption)[0]
             elif self._options.pileup_input.startswith("filelist:"):
                 theFiles= (filesFromList(self._options.pileup_input[9:]))[0]
             else:
                 theFiles=self._options.pileup_input.split(',')
             #print theFiles
             self.executeAndRemember( "process.mixData.input.fileNames = cms.untracked.vstring(%s)"%(  theFiles ) )
 
         return
 

def ConfigBuilder.ConfigBuilder.prepare_DIGI	(	self,
		sequence = `None`
	)

Enrich the schedule with the digitisation step

Definition at line 1417 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.DIGIDefaultCFF, ConfigBuilder.ConfigBuilder.executeAndRemember(), ConfigBuilder.ConfigBuilder.loadAndRemember(), ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), and ConfigBuilder.ConfigBuilder.scheduleSequence().

     def prepare_DIGI(self, sequence = None):
         """ Enrich the schedule with the digitisation step"""
         self.loadDefaultOrSpecifiedCFF(sequence,self.DIGIDefaultCFF)
 
         if self._options.gflash==True:
             self.loadAndRemember("Configuration/StandardSequences/GFlashDIGI_cff")
 
         if sequence == 'pdigi_valid' or sequence == 'pdigi_hi':
             self.executeAndRemember("process.mix.digitizers = cms.PSet(process.theDigitizersValid)")
 
         if sequence != 'pdigi_nogen' and sequence != 'pdigi_valid_nogen' and sequence != 'pdigi_hi_nogen' and not self.process.source.type_()=='EmptySource' and not self._options.filetype == "LHE":
             if self._options.inputEventContent=='':
                 self._options.inputEventContent='REGEN'
             else:
                 self._options.inputEventContent=self._options.inputEventContent+',REGEN'
 
 
         self.scheduleSequence(sequence.split('.')[-1],'digitisation_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_DIGI2RAW	(	self,
		sequence = `None`
	)

Definition at line 1461 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.DIGI2RAWDefaultCFF, ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), and ConfigBuilder.ConfigBuilder.scheduleSequence().

     def prepare_DIGI2RAW(self, sequence = None):
         self.loadDefaultOrSpecifiedCFF(sequence,self.DIGI2RAWDefaultCFF)
         self.scheduleSequence(sequence.split('.')[-1],'digi2raw_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_DQM	(	self,
		sequence = `'DQMOffline'`
	)

Definition at line 1935 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.DQMOFFLINEDefaultCFF, ConfigBuilder.ConfigBuilder.expandMapping(), edm::eventsetup::heterocontainer.insert(), list(), ConfigBuilder.ConfigBuilder.loadAndRemember(), ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), edm.print(), DTT0WireWorkflow.DTT0WireWorkflow.process, DTVdriftWorkflow.DTvdriftWorkflow.process, DTTtrigWorkflow.DTttrigWorkflow.process, DTWorkflow.DTWorkflow.process, ConfigBuilder.ConfigBuilder.process, ConfigBuilder.ConfigBuilder.renameHLTprocessInSequence(), and split.

     def prepare_DQM(self, sequence = 'DQMOffline'):
         # this one needs replacement
 
         # any 'DQM' job should use DQMStore in non-legacy mode (but not HARVESTING)
         self.loadAndRemember("DQMServices/Core/DQMStoreNonLegacy_cff")
         self.loadDefaultOrSpecifiedCFF(sequence,self.DQMOFFLINEDefaultCFF)
         sequenceList=sequence.split('.')[-1].split('+')
         postSequenceList=sequence.split('.')[-1].split('+')
         from DQMOffline.Configuration.autoDQM import autoDQM
         self.expandMapping(sequenceList,autoDQM,index=0)
         self.expandMapping(postSequenceList,autoDQM,index=1)
 
         if len(set(sequenceList))!=len(sequenceList):
             sequenceList=list(set(sequenceList))
             print("Duplicate entries for DQM:, using",sequenceList)
 
         pathName='dqmoffline_step'
         for (i,sequence) in enumerate(sequenceList):
             if (i!=0):
                 pathName='dqmoffline_%d_step'%(i)
 
             if 'HLT' in self.stepMap.keys() or self._options.hltProcess:
                 self.renameHLTprocessInSequence(sequence)
 
             setattr(self.process,pathName, cms.EndPath( getattr(self.process,sequence ) ) )
             self.schedule.append(getattr(self.process,pathName))
 
             if hasattr(self.process,"genstepfilter") and len(self.process.genstepfilter.triggerConditions):
                 #will get in the schedule, smoothly
                 getattr(self.process,pathName).insert(0,self.process.genstepfilter)
 
         pathName='dqmofflineOnPAT_step'
         for (i,sequence) in enumerate(postSequenceList):
             if (i!=0):
                 pathName='dqmofflineOnPAT_%d_step'%(i)
 
             setattr(self.process,pathName, cms.EndPath( getattr(self.process, sequence ) ) )
             self.schedule.append(getattr(self.process,pathName))
 

def ConfigBuilder.ConfigBuilder.prepare_EI	(	self,
		sequence = `None`
	)

Enrich the schedule with event interpretation

Definition at line 1693 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.EIDefaultCFF, ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), and ConfigBuilder.ConfigBuilder.scheduleSequence().

     def prepare_EI(self, sequence = None):
         ''' Enrich the schedule with event interpretation '''
         from Configuration.StandardSequences.EventInterpretation import EventInterpretation
         if sequence in EventInterpretation:
             self.EIDefaultCFF = EventInterpretation[sequence]
             sequence = 'EIsequence'
         else:
             raise Exception('Cannot set %s event interpretation'%( sequence) )
         self.loadDefaultOrSpecifiedCFF(sequence,self.EIDefaultCFF)
         self.scheduleSequence(sequence.split('.')[-1],'eventinterpretaion_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_ENDJOB	(	self,
		sequence = `'endOfProcess'`
	)

Definition at line 2045 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.ENDJOBDefaultCFF, ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), and ConfigBuilder.ConfigBuilder.scheduleSequenceAtEnd().

     def prepare_ENDJOB(self, sequence = 'endOfProcess'):
         self.loadDefaultOrSpecifiedCFF(sequence,self.ENDJOBDefaultCFF)
         self.scheduleSequenceAtEnd(sequence.split('.')[-1],'endjob_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_FILTER	(	self,
		sequence = `None`
	)

Enrich the schedule with a user defined filter sequence

Definition at line 1589 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.__init__(), VisualizationOptions.load(), BTagCalibrationReader::BTagCalibrationReaderImpl.load(), BTagCalibrationReader.load(), cond::persistency::KeyList.load(), cond::persistency::GTEditor.load(), cond::persistency::IOVEditor.load(), L1MuDTPtaLut.load(), L1MuDTPhiLut.load(), L1MuDTEtaPatternLut.load(), L1MuDTQualPatternLut.load(), PiecewiseScalingPolynomial.load(), L1MuDTExtLut.load(), cond::persistency::RunInfoProxy.load(), HBHENegativeEFilter.load(), HcalIndexLookup.load(), cond::persistency::GTProxy.load(), cond::persistency::IOVProxy.load(), HBHEChannelGroups.load(), TrackerMap.load(), OOTPileupCorrData.load(), ConfigBuilder.ConfigBuilder.load(), tkal_create_file_lists._DasCache.load(), and resolutioncreator_cfi.object.

     def prepare_FILTER(self, sequence = None):
         ''' Enrich the schedule with a user defined filter sequence '''
         ## load the relevant part
         filterConfig=self.load(sequence.split('.')[0])
         filterSeq=sequence.split('.')[-1]
         ## print it in the configuration
         class PrintAllModules(object):
             def __init__(self):
                 self.inliner=''
                 pass
             def enter(self,visitee):
                 try:
                     label=visitee.label()
                     ##needs to be in reverse order
                     self.inliner=label+','+self.inliner
                 except:
                     pass
             def leave(self,v): pass
 
         expander=PrintAllModules()
         getattr(self.process,filterSeq).visit( expander )
         self._options.inlineObjets+=','+expander.inliner
         self._options.inlineObjets+=','+filterSeq
 
         ## put the filtering path in the schedule
         self.scheduleSequence(filterSeq,'filtering_step')
         self.nextScheduleIsConditional=True
         ## put it before all the other paths
         self.productionFilterSequence = filterSeq
 
         return
 

def ConfigBuilder.ConfigBuilder.prepare_GEN	(	self,
		sequence = `None`
	)

load the fragment of generator configuration

Definition at line 1319 of file ConfigBuilder.py.

     def prepare_GEN(self, sequence = None):
         """ load the fragment of generator configuration """
         loadFailure=False
         #remove trailing .py
         #support old style .cfi by changing into something.cfi into something_cfi
         #remove python/ from the name
         loadFragment = self._options.evt_type.replace('.py','',).replace('.','_').replace('python/','')
         #standard location of fragments
         if not '/' in loadFragment:
             loadFragment='Configuration.Generator.'+loadFragment
         else:
             loadFragment=loadFragment.replace('/','.')
         try:
             print("Loading generator fragment from",loadFragment)
             __import__(loadFragment)
         except:
             loadFailure=True
             #if self.process.source and self.process.source.type_()=='EmptySource':
             if not (self._options.filein or self._options.dasquery):
                 raise Exception("Neither gen fragment of input files provided: this is an inconsistent GEN step configuration")
 
         if not loadFailure:
             generatorModule=sys.modules[loadFragment]
             genModules=generatorModule.__dict__
             #remove lhe producer module since this should have been
             #imported instead in the LHE step
             if self.LHEDefaultSeq in genModules:
                 del genModules[self.LHEDefaultSeq]
 
             if self._options.hideGen:
                 self.loadAndRemember(loadFragment)
             else:
                 self.process.load(loadFragment)
                 # expose the objects from that fragment to the configuration
                 import FWCore.ParameterSet.Modules as cmstypes
                 for name in genModules:
                     theObject = getattr(generatorModule,name)
                     if isinstance(theObject, cmstypes._Module):
                         self._options.inlineObjets=name+','+self._options.inlineObjets
                     elif isinstance(theObject, cms.Sequence) or isinstance(theObject, cmstypes.ESProducer):
                         self._options.inlineObjets+=','+name
 
             if sequence == self.GENDefaultSeq or sequence == 'pgen_genonly':
                 if 'ProductionFilterSequence' in genModules and ('generator' in genModules):
                     self.productionFilterSequence = 'ProductionFilterSequence'
                 elif 'generator' in genModules:
                     self.productionFilterSequence = 'generator'
 
         """ Enrich the schedule with the rest of the generation step """
         self.loadDefaultOrSpecifiedCFF(sequence,self.GENDefaultCFF)
         genSeqName=sequence.split('.')[-1]
 
         if True:
             try:
                 from Configuration.StandardSequences.VtxSmeared import VtxSmeared
                 cffToBeLoaded=VtxSmeared[self._options.beamspot]
                 self.loadAndRemember(cffToBeLoaded)
             except ImportError:
                 raise Exception("VertexSmearing type or beamspot "+self._options.beamspot+" unknown.")
 
             if self._options.scenario == 'HeavyIons':
                 if self._options.pileup=='HiMixGEN':
                     self.loadAndRemember("Configuration/StandardSequences/GeneratorMix_cff")
                 else:
                     self.loadAndRemember("Configuration/StandardSequences/GeneratorHI_cff")
 
         self.process.generation_step = cms.Path( getattr(self.process,genSeqName) )
         self.schedule.append(self.process.generation_step)
 
         #register to the genstepfilter the name of the path (static right now, but might evolve)
         self.executeAndRemember('process.genstepfilter.triggerConditions=cms.vstring("generation_step")')
 
         if 'reGEN' in self.stepMap:
             #stop here
             return
 
         """ Enrich the schedule with the summary of the filter step """
         #the gen filter in the endpath
         self.loadAndRemember("GeneratorInterface/Core/genFilterSummary_cff")
         self.scheduleSequenceAtEnd('genFilterSummary','genfiltersummary_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_HARVESTING	(	self,
		sequence = `None`
	)

Enrich the process with harvesting step

Definition at line 1974 of file ConfigBuilder.py.

     def prepare_HARVESTING(self, sequence = None):
         """ Enrich the process with harvesting step """
         self.DQMSaverCFF='Configuration/StandardSequences/DQMSaver'+self._options.harvesting+'_cff'
         self.loadAndRemember(self.DQMSaverCFF)
 
         harvestingConfig = self.loadDefaultOrSpecifiedCFF(sequence,self.HARVESTINGDefaultCFF)
         sequence = sequence.split('.')[-1]
 
         # decide which HARVESTING paths to use
         harvestingList = sequence.split("+")
         from DQMOffline.Configuration.autoDQM import autoDQM
         from Validation.Configuration.autoValidation import autoValidation
         import copy
         combined_mapping = copy.deepcopy( autoDQM )
         combined_mapping.update( autoValidation )
         self.expandMapping(harvestingList,combined_mapping,index=-1)
 
         if len(set(harvestingList))!=len(harvestingList):
             harvestingList=list(set(harvestingList))
             print("Duplicate entries for HARVESTING, using",harvestingList)
 
         for name in harvestingList:
             if not name in harvestingConfig.__dict__:
                 print(name,"is not a possible harvesting type. Available are",harvestingConfig.__dict__.keys())
                 continue
             harvestingstream = getattr(harvestingConfig,name)
             if isinstance(harvestingstream,cms.Path):
                 self.schedule.append(harvestingstream)
                 self.blacklist_paths.append(harvestingstream)
             if isinstance(harvestingstream,cms.Sequence):
                 setattr(self.process,name+"_step",cms.Path(harvestingstream))
                 self.schedule.append(getattr(self.process,name+"_step"))
 
         self.scheduleSequence('DQMSaver','dqmsave_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_HLT	(	self,
		sequence = `None`
	)

Enrich the schedule with the HLT simulation step

Definition at line 1491 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.executeAndRemember(), join(), ConfigBuilder.ConfigBuilder.loadAndRemember(), edm.print(), DTT0WireWorkflow.DTT0WireWorkflow.process, DTVdriftWorkflow.DTvdriftWorkflow.process, DTTtrigWorkflow.DTttrigWorkflow.process, DTWorkflow.DTWorkflow.process, ConfigBuilder.ConfigBuilder.process, and CustomConfigs.ProcessName().

     def prepare_HLT(self, sequence = None):
         """ Enrich the schedule with the HLT simulation step"""
         if not sequence:
             print("no specification of the hlt menu has been given, should never happen")
             raise  Exception('no HLT sequence provided')
 
         if '@' in sequence:
             # case where HLT:@something was provided
             from Configuration.HLT.autoHLT import autoHLT
             key = sequence[1:]
             if key in autoHLT:
                 sequence = autoHLT[key]
             else:
                 raise ValueError('no HLT mapping key "%s" found in autoHLT' % key)
 
         if ',' in sequence:
             #case where HLT:something:something was provided
             self.executeAndRemember('import HLTrigger.Configuration.Utilities')
             optionsForHLT = {}
             if self._options.scenario == 'HeavyIons':
                 optionsForHLT['type'] = 'HIon'
             else:
                 optionsForHLT['type'] = 'GRun'
             optionsForHLTConfig = ', '.join('%s=%s' % (key, repr(val)) for (key, val) in six.iteritems(optionsForHLT))
             if sequence == 'run,fromSource':
                 if hasattr(self.process.source,'firstRun'):
                     self.executeAndRemember('process.loadHltConfiguration("run:%%d"%%(process.source.firstRun.value()),%s)'%(optionsForHLTConfig))
                 elif hasattr(self.process.source,'setRunNumber'):
                     self.executeAndRemember('process.loadHltConfiguration("run:%%d"%%(process.source.setRunNumber.value()),%s)'%(optionsForHLTConfig))
                 else:
                     raise Exception('Cannot replace menu to load %s'%(sequence))
             else:
                 self.executeAndRemember('process.loadHltConfiguration("%s",%s)'%(sequence.replace(',',':'),optionsForHLTConfig))
         else:
             self.loadAndRemember('HLTrigger/Configuration/HLT_%s_cff'       % sequence)
 
         if self._options.isMC:
             self._options.customisation_file.append("HLTrigger/Configuration/customizeHLTforMC.customizeHLTforMC")
 
         if self._options.name != 'HLT':
             self.additionalCommands.append('from HLTrigger.Configuration.CustomConfigs import ProcessName')
             self.additionalCommands.append('process = ProcessName(process)')
             self.additionalCommands.append('')
             from HLTrigger.Configuration.CustomConfigs import ProcessName
             self.process = ProcessName(self.process)
 
         self.schedule.append(self.process.HLTSchedule)
         [self.blacklist_paths.append(path) for path in self.process.HLTSchedule if isinstance(path,(cms.Path,cms.EndPath))]
 
         #this is a fake, to be removed with fastim migration and HLT menu dump
         if self._options.fast:
             if not hasattr(self.process,'HLTEndSequence'):
                 self.executeAndRemember("process.HLTEndSequence = cms.Sequence( process.dummyModule )")
 
 

def ConfigBuilder.ConfigBuilder.prepare_L1	(	self,
		sequence = `None`
	)

Enrich the schedule with the L1 simulation step

Definition at line 1471 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.L1EMDefaultCFF, ConfigBuilder.ConfigBuilder.loadAndRemember(), and ConfigBuilder.ConfigBuilder.scheduleSequence().

     def prepare_L1(self, sequence = None):
         """ Enrich the schedule with the L1 simulation step"""
         assert(sequence == None)
         self.loadAndRemember(self.L1EMDefaultCFF)
         self.scheduleSequence('SimL1Emulator','L1simulation_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_L1HwVal	(	self,
		sequence = `'L1HwVal'`
	)

Enrich the schedule with L1 HW validation

Definition at line 1570 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.L1HwValDefaultCFF, ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), and edm.print().

     def prepare_L1HwVal(self, sequence = 'L1HwVal'):
         ''' Enrich the schedule with L1 HW validation '''
         self.loadDefaultOrSpecifiedCFF(sequence,self.L1HwValDefaultCFF)
         #self.scheduleSequence(sequence.split('.')[-1],'l1hwval_step')
         print('\n\n\n DEPRECATED this has no action \n\n\n')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_L1Reco	(	self,
		sequence = `"L1Reco"`
	)

Enrich the schedule with L1 reconstruction

Definition at line 1577 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.L1RecoDefaultCFF, ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), and ConfigBuilder.ConfigBuilder.scheduleSequence().

     def prepare_L1Reco(self, sequence = "L1Reco"):
         ''' Enrich the schedule with L1 reconstruction '''
         self.loadDefaultOrSpecifiedCFF(sequence,self.L1RecoDefaultCFF)
         self.scheduleSequence(sequence.split('.')[-1],'L1Reco_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_L1REPACK	(	self,
		sequence = `None`
	)

Enrich the schedule with the L1 simulation step, running the L1 emulator on data unpacked from the RAW collection, and repacking the result in a new RAW collection

Definition at line 1478 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.loadAndRemember(), edm.print(), ConfigBuilder.ConfigBuilder.renameInputTagsInSequence(), and ConfigBuilder.ConfigBuilder.scheduleSequence().

     def prepare_L1REPACK(self, sequence = None):
         """ Enrich the schedule with the L1 simulation step, running the L1 emulator on data unpacked from the RAW collection, and repacking the result in a new RAW collection"""
         supported = ['GT','GT1','GT2','GCTGT','Full','FullSimTP','FullMC','Full2015Data','uGT','CalouGT']
         if sequence in supported:
             self.loadAndRemember('Configuration/StandardSequences/SimL1EmulatorRepack_%s_cff'%sequence)
             if self._options.scenario == 'HeavyIons':
                 self.renameInputTagsInSequence("SimL1Emulator","rawDataCollector","rawDataRepacker")
             self.scheduleSequence('SimL1Emulator','L1RePack_step')
         else:
             print("L1REPACK with '",sequence,"' is not supported! Supported choices are: ",supported)
             raise Exception('unsupported feature')
 
 

def ConfigBuilder.ConfigBuilder.prepare_L1TrackTrigger	(	self,
		sequence = `"L1TrackTrigger"`
	)

Enrich the schedule with L1 reconstruction

Definition at line 1583 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.L1TrackTriggerDefaultCFF, ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), and ConfigBuilder.ConfigBuilder.scheduleSequence().

     def prepare_L1TrackTrigger(self, sequence = "L1TrackTrigger"):
         ''' Enrich the schedule with L1 reconstruction '''
         self.loadDefaultOrSpecifiedCFF(sequence,self.L1TrackTriggerDefaultCFF)
         self.scheduleSequence(sequence.split('.')[-1],'L1TrackTrigger_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_LHE	(	self,
		sequence = `None`
	)

Definition at line 1302 of file ConfigBuilder.py.

     def prepare_LHE(self, sequence = None):
             #load the fragment
             ##make it loadable
         loadFragment = self._options.evt_type.replace('.py','',).replace('.','_').replace('python/','').replace('/','.')
         print("Loading lhe fragment from",loadFragment)
         __import__(loadFragment)
         self.process.load(loadFragment)
         ##inline the modules
         self._options.inlineObjets+=','+sequence
 
         getattr(self.process,sequence).nEvents = int(self._options.number)
 
         #schedule it
         self.process.lhe_step = cms.Path( getattr( self.process,sequence)  )
         self.excludedPaths.append("lhe_step")
         self.schedule.append( self.process.lhe_step )
 

def ConfigBuilder.ConfigBuilder.prepare_NANO	(	self,
		sequence = `"nanoAOD"`
	)

Enrich the schedule with NANO

Definition at line 1678 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), ConfigBuilder.ConfigBuilder.NANODefaultCFF, and ConfigBuilder.ConfigBuilder.scheduleSequence().

     def prepare_NANO(self, sequence = "nanoAOD"):
         ''' Enrich the schedule with NANO '''
         self.loadDefaultOrSpecifiedCFF(sequence,self.NANODefaultCFF)
         self.scheduleSequence(sequence.split('.')[-1],'nanoAOD_step')
         custom = "nanoAOD_customizeData" if self._options.isData else "nanoAOD_customizeMC"
         if self._options.runUnscheduled:
             self._options.customisation_file_unsch.insert(0,"PhysicsTools/NanoAOD/nano_cff."+custom)
         else:
             self._options.customisation_file.insert(0,"PhysicsTools/NanoAOD/nano_cff."+custom)
         if self._options.hltProcess:
             if len(self._options.customise_commands) > 1:
                 self._options.customise_commands = self._options.customise_commands + " \n"
             self._options.customise_commands = self._options.customise_commands + "process.unpackedPatTrigger.triggerResults= cms.InputTag( 'TriggerResults::"+self._options.hltProcess+"' )\n"
 
 

def ConfigBuilder.ConfigBuilder.prepare_PAT	(	self,
		sequence = `"miniAOD"`
	)

Enrich the schedule with PAT

Definition at line 1642 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), ConfigBuilder.ConfigBuilder.PATDefaultCFF, and ConfigBuilder.ConfigBuilder.prepare_PATFILTER().

     def prepare_PAT(self, sequence = "miniAOD"):
         ''' Enrich the schedule with PAT '''
         self.prepare_PATFILTER(self)
         self.loadDefaultOrSpecifiedCFF(sequence,self.PATDefaultCFF)
         self.labelsToAssociate.append('patTask')
         if not self._options.runUnscheduled:
             raise Exception("MiniAOD production can only run in unscheduled mode, please run cmsDriver with --runUnscheduled")
         if self._options.isData:
             self._options.customisation_file_unsch.insert(0,"PhysicsTools/PatAlgos/slimming/miniAOD_tools.miniAOD_customizeAllData")
         else:
             if self._options.fast:
                 self._options.customisation_file_unsch.insert(0,"PhysicsTools/PatAlgos/slimming/miniAOD_tools.miniAOD_customizeAllMCFastSim")
             else:
                 self._options.customisation_file_unsch.insert(0,"PhysicsTools/PatAlgos/slimming/miniAOD_tools.miniAOD_customizeAllMC")
 
         if self._options.hltProcess:
             if len(self._options.customise_commands) > 1:
                 self._options.customise_commands = self._options.customise_commands + " \n"
             self._options.customise_commands = self._options.customise_commands + "process.patTrigger.processName = \""+self._options.hltProcess+"\"\n"
             self._options.customise_commands = self._options.customise_commands + "process.slimmedPatTrigger.triggerResults= cms.InputTag( 'TriggerResults::"+self._options.hltProcess+"' )\n"
             self._options.customise_commands = self._options.customise_commands + "process.patMuons.triggerResults= cms.InputTag( 'TriggerResults::"+self._options.hltProcess+"' )\n"
 
 #            self.renameHLTprocessInSequence(sequence)
 
         return
 

def ConfigBuilder.ConfigBuilder.prepare_PATFILTER	(	self,
		sequence = `None`
	)

Definition at line 1564 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.loadAndRemember(), DTT0WireWorkflow.DTT0WireWorkflow.process, DTVdriftWorkflow.DTvdriftWorkflow.process, DTTtrigWorkflow.DTttrigWorkflow.process, DTWorkflow.DTWorkflow.process, and ConfigBuilder.ConfigBuilder.process.

Referenced by ConfigBuilder.ConfigBuilder.prepare_PAT().

     def prepare_PATFILTER(self, sequence=None):
         self.loadAndRemember("PhysicsTools/PatAlgos/slimming/metFilterPaths_cff")
         from PhysicsTools.PatAlgos.slimming.metFilterPaths_cff import allMetFilterPaths
         for filt in allMetFilterPaths:
             self.schedule.append(getattr(self.process,'Flag_'+filt))
 

def ConfigBuilder.ConfigBuilder.prepare_PATGEN	(	self,
		sequence = `"miniGEN"`
	)

Enrich the schedule with PATGEN

Definition at line 1668 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), and ConfigBuilder.ConfigBuilder.PATGENDefaultCFF.

     def prepare_PATGEN(self, sequence = "miniGEN"):
         ''' Enrich the schedule with PATGEN '''
         self.loadDefaultOrSpecifiedCFF(sequence,self.PATGENDefaultCFF) #this is unscheduled
         self.labelsToAssociate.append('patGENTask')
         if not self._options.runUnscheduled:
             raise Exception("MiniGEN production can only run in unscheduled mode, please run cmsDriver with --runUnscheduled")
         if self._options.isData:
             raise Exception("PATGEN step can only run on MC")
         return
 

def ConfigBuilder.ConfigBuilder.prepare_POSTRECO	(	self,
		sequence = `None`
	)

Enrich the schedule with the postreco step

Definition at line 1755 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.loadAndRemember(), ConfigBuilder.ConfigBuilder.POSTRECODefaultCFF, and ConfigBuilder.ConfigBuilder.scheduleSequence().

     def prepare_POSTRECO(self, sequence = None):
         """ Enrich the schedule with the postreco step """
         self.loadAndRemember(self.POSTRECODefaultCFF)
         self.scheduleSequence('postreco_generator','postreco_step')
         return
 
 

def ConfigBuilder.ConfigBuilder.prepare_RAW2DIGI	(	self,
		sequence = `"RawToDigi"`
	)

Definition at line 1557 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), ConfigBuilder.ConfigBuilder.RAW2DIGIDefaultCFF, and ConfigBuilder.ConfigBuilder.scheduleSequence().

Referenced by ConfigBuilder.ConfigBuilder.prepare_RAW2RECO().

     def prepare_RAW2DIGI(self, sequence = "RawToDigi"):
         self.loadDefaultOrSpecifiedCFF(sequence,self.RAW2DIGIDefaultCFF)
         self.scheduleSequence(sequence,'raw2digi_step')
          #          if self._options.isRepacked:
         #self.renameInputTagsInSequence(sequence)
         return
 

def ConfigBuilder.ConfigBuilder.prepare_RAW2RECO	(	self,
		sequence = `None`
	)

Definition at line 1546 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.prepare_RAW2DIGI(), ConfigBuilder.ConfigBuilder.prepare_RECO(), and edm.print().

     def prepare_RAW2RECO(self, sequence = None):
         if ','in sequence:
             seqReco=sequence.split(',')[1]
             seqDigi=sequence.split(',')[0]
         else:
             print("RAW2RECO requires two specifications",sequence,"insufficient")
 
         self.prepare_RAW2DIGI(seqDigi)
         self.prepare_RECO(seqReco)
         return
 

def ConfigBuilder.ConfigBuilder.prepare_RECO	(	self,
		sequence = `"reconstruction"`
	)

Enrich the schedule with reconstruction

Definition at line 1621 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), ConfigBuilder.ConfigBuilder.RECODefaultCFF, and ConfigBuilder.ConfigBuilder.scheduleSequence().

Referenced by ConfigBuilder.ConfigBuilder.prepare_RAW2RECO().

     def prepare_RECO(self, sequence = "reconstruction"):
         ''' Enrich the schedule with reconstruction '''
         self.loadDefaultOrSpecifiedCFF(sequence,self.RECODefaultCFF)
         self.scheduleSequence(sequence.split('.')[-1],'reconstruction_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_RECOBEFMIX	(	self,
		sequence = `"reconstruction"`
	)

Enrich the schedule with the part of reconstruction that is done before mixing in FastSim

Definition at line 1633 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), edm.print(), ConfigBuilder.ConfigBuilder.RECOBEFMIXDefaultCFF, ConfigBuilder.ConfigBuilder.RECOBEFMIXDefaultSeq, and ConfigBuilder.ConfigBuilder.scheduleSequence().

     def prepare_RECOBEFMIX(self, sequence = "reconstruction"):
         ''' Enrich the schedule with the part of reconstruction that is done before mixing in FastSim'''
         if not self._options.fast:
             print("ERROR: this step is only implemented for FastSim")
             sys.exit()
         self.loadDefaultOrSpecifiedCFF(self.RECOBEFMIXDefaultSeq,self.RECOBEFMIXDefaultCFF)
         self.scheduleSequence(sequence.split('.')[-1],'reconstruction_befmix_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_RECOSIM	(	self,
		sequence = `"recosim"`
	)

Enrich the schedule with reconstruction

Definition at line 1627 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), ConfigBuilder.ConfigBuilder.RECOSIMDefaultCFF, and ConfigBuilder.ConfigBuilder.scheduleSequence().

     def prepare_RECOSIM(self, sequence = "recosim"):
         ''' Enrich the schedule with reconstruction '''
         self.loadDefaultOrSpecifiedCFF(sequence,self.RECOSIMDefaultCFF)
         self.scheduleSequence(sequence.split('.')[-1],'recosim_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_REPACK	(	self,
		sequence = `None`
	)

Definition at line 1466 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), ConfigBuilder.ConfigBuilder.REPACKDefaultCFF, and ConfigBuilder.ConfigBuilder.scheduleSequence().

     def prepare_REPACK(self, sequence = None):
         self.loadDefaultOrSpecifiedCFF(sequence,self.REPACKDefaultCFF)
         self.scheduleSequence(sequence.split('.')[-1],'digi2repack_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_SIM	(	self,
		sequence = `None`
	)

Enrich the schedule with the simulation step

Definition at line 1401 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.executeAndRemember(), ConfigBuilder.ConfigBuilder.loadAndRemember(), ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), ConfigBuilder.ConfigBuilder.scheduleSequence(), and ConfigBuilder.ConfigBuilder.SIMDefaultCFF.

     def prepare_SIM(self, sequence = None):
         """ Enrich the schedule with the simulation step"""
         self.loadDefaultOrSpecifiedCFF(sequence,self.SIMDefaultCFF)
         if not self._options.fast:
             if self._options.gflash==True:
                 self.loadAndRemember("Configuration/StandardSequences/GFlashSIM_cff")
 
             if self._options.magField=='0T':
                 self.executeAndRemember("process.g4SimHits.UseMagneticField = cms.bool(False)")
         else:
             if self._options.magField=='0T':
                 self.executeAndRemember("process.fastSimProducer.detectorDefinition.magneticFieldZ = cms.untracked.double(0.)")
 
         self.scheduleSequence(sequence.split('.')[-1],'simulation_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_SKIM	(	self,
		sequence = `"all"`
	)

Enrich the schedule with skimming fragments

Definition at line 1705 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.addExtraStream(), ConfigBuilder.ConfigBuilder.EVTCONTDefaultCFF, ConfigBuilder.ConfigBuilder.expandMapping(), join(), ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), edm.print(), and ConfigBuilder.ConfigBuilder.SKIMDefaultCFF.

     def prepare_SKIM(self, sequence = "all"):
         ''' Enrich the schedule with skimming fragments'''
         skimConfig = self.loadDefaultOrSpecifiedCFF(sequence,self.SKIMDefaultCFF)
         sequence = sequence.split('.')[-1]
 
         skimlist=sequence.split('+')
         ## support @Mu+DiJet+@Electron configuration via autoSkim.py
         from Configuration.Skimming.autoSkim import autoSkim
         self.expandMapping(skimlist,autoSkim)
 
         #print "dictionnary for skims:",skimConfig.__dict__
         for skim in skimConfig.__dict__:
             skimstream = getattr(skimConfig,skim)
             if isinstance(skimstream,cms.Path):
             #black list the alca path so that they do not appear in the cfg
                 self.blacklist_paths.append(skimstream)
             if (not isinstance(skimstream,cms.FilteredStream)):
                 continue
             shortname = skim.replace('SKIMStream','')
             if (sequence=="all"):
                 self.addExtraStream(skim,skimstream)
             elif (shortname in skimlist):
                 self.addExtraStream(skim,skimstream)
                 #add a DQM eventcontent for this guy
                 if self._options.datatier=='DQM':
                     self.process.load(self.EVTCONTDefaultCFF)
                     skimstreamDQM = cms.FilteredStream(
                             responsible = skimstream.responsible,
                             name = skimstream.name+'DQM',
                             paths = skimstream.paths,
                             selectEvents = skimstream.selectEvents,
                             content = self._options.datatier+'EventContent',
                             dataTier = cms.untracked.string(self._options.datatier)
                             )
                     self.addExtraStream(skim+'DQM',skimstreamDQM)
                 for i in range(skimlist.count(shortname)):
                     skimlist.remove(shortname)
 
 
 
         if (skimlist.__len__()!=0 and sequence!="all"):
             print('WARNING, possible typo with SKIM:'+'+'.join(skimlist))
             raise Exception('WARNING, possible typo with SKIM:'+'+'.join(skimlist))
 

def ConfigBuilder.ConfigBuilder.prepare_USER	(	self,
		sequence = `None`
	)

Enrich the schedule with a user defined sequence

Definition at line 1749 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), ConfigBuilder.ConfigBuilder.scheduleSequence(), and ConfigBuilder.ConfigBuilder.USERDefaultCFF.

     def prepare_USER(self, sequence = None):
         ''' Enrich the schedule with a user defined sequence '''
         self.loadDefaultOrSpecifiedCFF(sequence,self.USERDefaultCFF)
         self.scheduleSequence(sequence.split('.')[-1],'user_step')
         return
 

def ConfigBuilder.ConfigBuilder.prepare_VALIDATION	(	self,
		sequence = `'validation'`
	)

Definition at line 1762 of file ConfigBuilder.py.

References any(), ConfigBuilder.ConfigBuilder.executeAndRemember(), ConfigBuilder.ConfigBuilder.expandMapping(), edm::eventsetup::heterocontainer.insert(), ConfigBuilder.ConfigBuilder.loadDefaultOrSpecifiedCFF(), genParticles_cff.map, edm.print(), DTT0WireWorkflow.DTT0WireWorkflow.process, DTVdriftWorkflow.DTvdriftWorkflow.process, DTTtrigWorkflow.DTttrigWorkflow.process, DTWorkflow.DTWorkflow.process, ConfigBuilder.ConfigBuilder.process, ConfigBuilder.ConfigBuilder.renameHLTprocessInSequence(), split, ConfigBuilder.ConfigBuilder.stepMap, and ConfigBuilder.ConfigBuilder.VALIDATIONDefaultCFF.

     def prepare_VALIDATION(self, sequence = 'validation'):
         print(sequence,"in preparing validation")
         self.loadDefaultOrSpecifiedCFF(sequence,self.VALIDATIONDefaultCFF)
         from Validation.Configuration.autoValidation import autoValidation
         #in case VALIDATION:something:somethingelse -> something,somethingelse
         sequence=sequence.split('.')[-1]
         if sequence.find(',')!=-1:
             prevalSeqName=sequence.split(',')[0].split('+')
             valSeqName=sequence.split(',')[1].split('+')
             self.expandMapping(prevalSeqName,autoValidation,index=0)
             self.expandMapping(valSeqName,autoValidation,index=1)
         else:
             if '@' in sequence:
                 prevalSeqName=sequence.split('+')
                 valSeqName=sequence.split('+')
                 self.expandMapping(prevalSeqName,autoValidation,index=0)
                 self.expandMapping(valSeqName,autoValidation,index=1)
             else:
                 postfix=''
                 if sequence:
                     postfix='_'+sequence
                 prevalSeqName=['prevalidation'+postfix]
                 valSeqName=['validation'+postfix]
                 if not hasattr(self.process,valSeqName[0]):
                     prevalSeqName=['']
                     valSeqName=[sequence]
 
         def NFI(index):
             ##name from index, required to keep backward compatibility
             if index==0:
                 return ''
             else:
                 return '%s'%index
 
 
         #rename the HLT process in validation steps
         if ('HLT' in self.stepMap and not self._options.fast) or self._options.hltProcess:
             for s in valSeqName+prevalSeqName:
                 if s:
                     self.renameHLTprocessInSequence(s)
         for (i,s) in enumerate(prevalSeqName):
             if s:
                 setattr(self.process,'prevalidation_step%s'%NFI(i),  cms.Path( getattr(self.process, s)) )
                 self.schedule.append(getattr(self.process,'prevalidation_step%s'%NFI(i)))
 
         for (i,s) in enumerate(valSeqName):
             setattr(self.process,'validation_step%s'%NFI(i), cms.EndPath( getattr(self.process, s)))
             self.schedule.append(getattr(self.process,'validation_step%s'%NFI(i)))
 
         #needed in case the miniAODValidation sequence is run starting from AODSIM
         if 'PAT' in self.stepMap and not 'RECO' in self.stepMap:
             return
 
         if not 'DIGI' in self.stepMap and not self._options.fast and not any(map( lambda s : s.startswith('genvalid'), valSeqName)):
             if self._options.restoreRNDSeeds==False and not self._options.restoreRNDSeeds==True:
                 self._options.restoreRNDSeeds=True
 
         if not 'DIGI' in self.stepMap and not self._options.fast:
             self.executeAndRemember("process.mix.playback = True")
             self.executeAndRemember("process.mix.digitizers = cms.PSet()")
             self.executeAndRemember("for a in process.aliases: delattr(process, a)")
             self._options.customisation_file.append("SimGeneral/MixingModule/fullMixCustomize_cff.setCrossingFrameOn")
 
         if hasattr(self.process,"genstepfilter") and len(self.process.genstepfilter.triggerConditions):
             #will get in the schedule, smoothly
             for (i,s) in enumerate(valSeqName):
                 getattr(self.process,'validation_step%s'%NFI(i)).insert(0, self.process.genstepfilter)
 
         return
 
 

def ConfigBuilder.ConfigBuilder.profileOptions ( self )

addIgProfService
Function to add the igprof profile service so that you can dump in the middle
of the run.

Definition at line 270 of file ConfigBuilder.py.

References createfilelist.int, and str.

Referenced by ConfigBuilder.ConfigBuilder.addCommon().

     def profileOptions(self):
         """
         addIgProfService
         Function to add the igprof profile service so that you can dump in the middle
         of the run.
         """
         profileOpts = self._options.profile.split(':')
         profilerStart = 1
         profilerInterval = 100
         profilerFormat = None
         profilerJobFormat = None
 
         if len(profileOpts):
             #type, given as first argument is unused here
             profileOpts.pop(0)
         if len(profileOpts):
             startEvent = profileOpts.pop(0)
             if not startEvent.isdigit():
                 raise Exception("%s is not a number" % startEvent)
             profilerStart = int(startEvent)
         if len(profileOpts):
             eventInterval = profileOpts.pop(0)
             if not eventInterval.isdigit():
                 raise Exception("%s is not a number" % eventInterval)
             profilerInterval = int(eventInterval)
         if len(profileOpts):
             profilerFormat = profileOpts.pop(0)
 
 
         if not profilerFormat:
             profilerFormat = "%s___%s___%%I.gz" % (
                 self._options.evt_type.replace("_cfi", ""),
                 hashlib.md5(
                     str(self._options.step) + str(self._options.pileup) + str(self._options.conditions) +
                     str(self._options.datatier) + str(self._options.profileTypeLabel)
                 ).hexdigest()
             )
         if not profilerJobFormat and profilerFormat.endswith(".gz"):
             profilerJobFormat = profilerFormat.replace(".gz", "_EndOfJob.gz")
         elif not profilerJobFormat:
             profilerJobFormat = profilerFormat + "_EndOfJob.gz"
 
         return (profilerStart,profilerInterval,profilerFormat,profilerJobFormat)
 

def ConfigBuilder.ConfigBuilder.renameHLTprocessInSequence	(	self,
		sequence,
		proc = `None`,
		HLTprocess = `'HLT'`
	)

Definition at line 1902 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.additionalCommands, edm.print(), DTT0WireWorkflow.DTT0WireWorkflow.process, DTVdriftWorkflow.DTvdriftWorkflow.process, DTTtrigWorkflow.DTttrigWorkflow.process, DTWorkflow.DTWorkflow.process, ConfigBuilder.ConfigBuilder.process, and cmsPerfHarvest.visit().

Referenced by ConfigBuilder.ConfigBuilder.prepare_DQM(), and ConfigBuilder.ConfigBuilder.prepare_VALIDATION().

     def renameHLTprocessInSequence(self,sequence,proc=None,HLTprocess='HLT'):
         if self._options.hltProcess:
             proc=self._options.hltProcess
         else:
             proc=self.process.name_()
         if proc==HLTprocess:    return
         # look up all module in dqm sequence
         print("replacing %s process name - sequence %s will use '%s'" % (HLTprocess,sequence, proc))
         getattr(self.process,sequence).visit(ConfigBuilder.MassSearchReplaceProcessNameVisitor(HLTprocess,proc,whitelist = ("subSystemFolder",)))
         if 'from Configuration.Applications.ConfigBuilder import ConfigBuilder' not in self.additionalCommands:
             self.additionalCommands.append('from Configuration.Applications.ConfigBuilder import ConfigBuilder')
         self.additionalCommands.append('process.%s.visit(ConfigBuilder.MassSearchReplaceProcessNameVisitor("%s", "%s", whitelist = ("subSystemFolder",)))'% (sequence,HLTprocess, proc))
 
 

def ConfigBuilder.ConfigBuilder.renameInputTagsInSequence	(	self,
		sequence,
		oldT = `"rawDataCollector"`,
		newT = `"rawDataRepacker"`
	)

Definition at line 1892 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.additionalCommands, MassReplace.massSearchReplaceAnyInputTag(), edm.print(), DTT0WireWorkflow.DTT0WireWorkflow.process, DTVdriftWorkflow.DTvdriftWorkflow.process, DTTtrigWorkflow.DTttrigWorkflow.process, DTWorkflow.DTWorkflow.process, and ConfigBuilder.ConfigBuilder.process.

Referenced by ConfigBuilder.ConfigBuilder.prepare_L1REPACK().

     def renameInputTagsInSequence(self,sequence,oldT="rawDataCollector",newT="rawDataRepacker"):
         print("Replacing all InputTag %s => %s"%(oldT,newT))
         from PhysicsTools.PatAlgos.tools.helpers import massSearchReplaceAnyInputTag
         massSearchReplaceAnyInputTag(getattr(self.process,sequence),oldT,newT)
         loadMe='from PhysicsTools.PatAlgos.tools.helpers import massSearchReplaceAnyInputTag'
         if not loadMe in self.additionalCommands:
             self.additionalCommands.append(loadMe)
         self.additionalCommands.append('massSearchReplaceAnyInputTag(process.%s,"%s","%s",False,True)'%(sequence,oldT,newT))
 

def ConfigBuilder.ConfigBuilder.scheduleSequence	(	self,
		seq,
		prefix,
		what = `'Path'`
	)

Definition at line 1205 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.nextScheduleIsConditional, DTT0WireWorkflow.DTT0WireWorkflow.process, DTVdriftWorkflow.DTvdriftWorkflow.process, DTTtrigWorkflow.DTttrigWorkflow.process, DTWorkflow.DTWorkflow.process, and ConfigBuilder.ConfigBuilder.process.

     def scheduleSequence(self,seq,prefix,what='Path'):
         if '*' in seq:
             #create only one path with all sequences in it
             for i,s in enumerate(seq.split('*')):
                 if i==0:
                     setattr(self.process,prefix,getattr(cms,what)( getattr(self.process, s) ))
                 else:
                     p=getattr(self.process,prefix)
                     tmp = getattr(self.process, s)
                     if isinstance(tmp, cms.Task):
                         p.associate(tmp)
                     else:
                         p+=tmp
             self.schedule.append(getattr(self.process,prefix))
             return
         else:
             #create as many path as many sequences
             if not '+' in seq:
                 if self.nextScheduleIsConditional:
                     self.conditionalPaths.append(prefix)
                 setattr(self.process,prefix,getattr(cms,what)( getattr(self.process, seq) ))
                 self.schedule.append(getattr(self.process,prefix))
             else:
                 for i,s in enumerate(seq.split('+')):
                     sn=prefix+'%d'%(i)
                     setattr(self.process,sn,getattr(cms,what)( getattr(self.process, s) ))
                     self.schedule.append(getattr(self.process,sn))
             return
 

def ConfigBuilder.ConfigBuilder.scheduleSequenceAtEnd	(	self,
		seq,
		prefix
	)

Definition at line 1234 of file ConfigBuilder.py.

References ConfigBuilder.ConfigBuilder.scheduleSequence().

Referenced by ConfigBuilder.ConfigBuilder.prepare_ENDJOB(), and ConfigBuilder.ConfigBuilder.prepare_GEN().

     def scheduleSequenceAtEnd(self,seq,prefix):
         self.scheduleSequence(seq,prefix,what='EndPath')
         return
 

Member Data Documentation

ConfigBuilder.ConfigBuilder._options

private

Definition at line 201 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.addSource().

ConfigBuilder.ConfigBuilder.addedObjects

Definition at line 261 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare().

ConfigBuilder.ConfigBuilder.additionalCommands

Definition at line 258 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare(), ConfigBuilder.ConfigBuilder.renameHLTprocessInSequence(), and ConfigBuilder.ConfigBuilder.renameInputTagsInSequence().

ConfigBuilder.ConfigBuilder.additionalOutputs

Definition at line 262 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare().

ConfigBuilder.ConfigBuilder.ALCADefaultCFF

Definition at line 924 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_ALCA().

ConfigBuilder.ConfigBuilder.ALCADefaultSeq

Definition at line 959 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.ALCAHARVESTDefaultCFF

Definition at line 947 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_ALCAHARVEST().

ConfigBuilder.ConfigBuilder.ALCAHARVESTDefaultSeq

Definition at line 970 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.AlCaPaths

Definition at line 1255 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.addOutput().

ConfigBuilder.ConfigBuilder.blacklist_paths

Definition at line 260 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare().

ConfigBuilder.ConfigBuilder.CFWRITERDefaultCFF

Definition at line 950 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_CFWRITER().

ConfigBuilder.ConfigBuilder.CFWRITERDefaultSeq

Definition at line 971 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.conditionalPaths

Definition at line 267 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare().

ConfigBuilder.ConfigBuilder.ConditionsDefaultCFF

Definition at line 949 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.addConditions().

ConfigBuilder.ConfigBuilder.DATAMIXDefaultCFF

Definition at line 954 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_DATAMIX().

ConfigBuilder.ConfigBuilder.DATAMIXDefaultSeq

Definition at line 964 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.DIGI2RAWDefaultCFF

Definition at line 928 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_DIGI2RAW().

ConfigBuilder.ConfigBuilder.DIGI2RAWDefaultSeq

Definition at line 965 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.DIGIDefaultCFF

Definition at line 927 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_DIGI().

ConfigBuilder.ConfigBuilder.DIGIDefaultSeq

Definition at line 963 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.DQMDefaultSeq

Definition at line 983 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.DQMOFFLINEDefaultCFF

Definition at line 945 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_DQM().

ConfigBuilder.ConfigBuilder.DQMSaverCFF

Definition at line 1976 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.EIDefaultCFF

Definition at line 940 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_EI().

ConfigBuilder.ConfigBuilder.EIDefaultSeq

Definition at line 980 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.ENDJOBDefaultCFF

Definition at line 948 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_ENDJOB().

ConfigBuilder.ConfigBuilder.ENDJOBDefaultSeq

Definition at line 985 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.EVTCONTDefaultCFF

Definition at line 991 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare(), and ConfigBuilder.ConfigBuilder.prepare_SKIM().

ConfigBuilder.ConfigBuilder.excludedPaths

Definition at line 268 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare().

ConfigBuilder.ConfigBuilder.GENDefaultCFF

Definition at line 925 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_GEN().

ConfigBuilder.ConfigBuilder.GENDefaultSeq

Definition at line 961 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_GEN().

ConfigBuilder.ConfigBuilder.GeometryCFF

Definition at line 1058 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.addStandardSequences().

ConfigBuilder.ConfigBuilder.geometryDBLabel

Definition at line 1059 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.addStandardSequences().

ConfigBuilder.ConfigBuilder.HARVESTINGDefaultCFF

Definition at line 946 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.HARVESTINGDefaultSeq

Definition at line 969 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.HLTDefaultCFF

Definition at line 931 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.HLTDefaultSeq

Definition at line 966 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.imports

Definition at line 249 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare().

ConfigBuilder.ConfigBuilder.inliner

load the relevant part

needs to be in reverse order

print it in the configuration

Definition at line 1597 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.L1DefaultSeq

Definition at line 967 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.L1EMDefaultCFF

Definition at line 929 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_L1().

ConfigBuilder.ConfigBuilder.L1HwValDefaultCFF

Definition at line 944 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_L1HwVal().

ConfigBuilder.ConfigBuilder.L1HwValDefaultSeq

Definition at line 982 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.L1MENUDefaultCFF

Definition at line 930 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.L1RecoDefaultCFF

Definition at line 934 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_L1Reco().

ConfigBuilder.ConfigBuilder.L1RecoDefaultSeq

Definition at line 973 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.L1REPACKDefaultSeq

Definition at line 968 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.L1TrackTriggerDefaultCFF

Definition at line 935 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_L1TrackTrigger().

ConfigBuilder.ConfigBuilder.L1TrackTriggerDefaultSeq

Definition at line 974 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.labelsToAssociate

Definition at line 265 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare().

ConfigBuilder.ConfigBuilder.LHEDefaultSeq

Definition at line 960 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_GEN().

ConfigBuilder.ConfigBuilder.magFieldCFF

Definition at line 1054 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.addStandardSequences().

ConfigBuilder.ConfigBuilder.NANODefaultCFF

Definition at line 939 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_NANO().

ConfigBuilder.ConfigBuilder.NANODefaultSeq

Definition at line 989 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.nextScheduleIsConditional

put the filtering path in the schedule

Definition at line 266 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.scheduleSequence().

ConfigBuilder.ConfigBuilder.PATDefaultCFF

Definition at line 938 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_PAT().

ConfigBuilder.ConfigBuilder.PATDefaultSeq

Definition at line 987 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.PATGENDefaultCFF

Definition at line 1001 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_PATGEN().

ConfigBuilder.ConfigBuilder.PATGENDefaultSeq

Definition at line 988 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.POSTRECODefaultCFF

Definition at line 942 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_POSTRECO().

ConfigBuilder.ConfigBuilder.POSTRECODefaultSeq

Definition at line 981 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.process

adding standard sequences might change the inputEventContent option and therefore needs to be finalized after

Definition at line 244 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.productionFilterSequence

put it before all the other paths

Definition at line 264 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare(), and ConfigBuilder.ConfigBuilder.prepare_GEN().

ConfigBuilder.ConfigBuilder.pythonCfgCode

Definition at line 2067 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare().

ConfigBuilder.ConfigBuilder.RAW2DIGIDefaultCFF

Definition at line 932 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_RAW2DIGI().

ConfigBuilder.ConfigBuilder.RAW2DIGIDefaultSeq

Definition at line 972 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.RAW2RECODefaultSeq

Definition at line 1044 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.RECOBEFMIXDefaultCFF

Definition at line 1109 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_RECOBEFMIX().

ConfigBuilder.ConfigBuilder.RECOBEFMIXDefaultSeq

Definition at line 1110 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_RECOBEFMIX().

ConfigBuilder.ConfigBuilder.RECODefaultCFF

Definition at line 936 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_RECO().

ConfigBuilder.ConfigBuilder.RECODefaultSeq

Definition at line 976 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.RECOSIMDefaultCFF

Definition at line 937 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_RECOSIM().

ConfigBuilder.ConfigBuilder.RECOSIMDefaultSeq

Definition at line 979 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.REDIGIDefaultSeq

Definition at line 1125 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.REPACKDefaultCFF

Definition at line 951 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_REPACK().

ConfigBuilder.ConfigBuilder.REPACKDefaultSeq

Definition at line 986 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.runsAndWeights

drop LHEXMLStringProduct on input to save memory if appropriate

Definition at line 479 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.schedule

Definition at line 252 of file ConfigBuilder.py.

Referenced by Config.Process.dumpConfig(), and ConfigBuilder.ConfigBuilder.prepare().

ConfigBuilder.ConfigBuilder.SIMDefaultCFF

Definition at line 926 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_SIM().

ConfigBuilder.ConfigBuilder.SIMDefaultSeq

Definition at line 962 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.SimGeometryCFF

Definition at line 1084 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.addStandardSequences().

ConfigBuilder.ConfigBuilder.SKIMDefaultCFF

Definition at line 941 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_SKIM().

ConfigBuilder.ConfigBuilder.stepKeys

Definition at line 224 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.addStandardSequences().

ConfigBuilder.ConfigBuilder.stepMap

Definition at line 223 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.addSource(), ConfigBuilder.ConfigBuilder.addStandardSequences(), ConfigBuilder.ConfigBuilder.define_Configs(), ConfigBuilder.ConfigBuilder.prepare_GEN(), and ConfigBuilder.ConfigBuilder.prepare_VALIDATION().

ConfigBuilder.ConfigBuilder.USERDefaultCFF

Definition at line 1047 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_USER().

ConfigBuilder.ConfigBuilder.USERDefaultSeq

Definition at line 1046 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.VALIDATIONDefaultCFF

Definition at line 943 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare_VALIDATION().

ConfigBuilder.ConfigBuilder.VALIDATIONDefaultSeq

Definition at line 984 of file ConfigBuilder.py.

ConfigBuilder.ConfigBuilder.with_input

Definition at line 248 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare().

ConfigBuilder.ConfigBuilder.with_output

Definition at line 243 of file ConfigBuilder.py.

Referenced by ConfigBuilder.ConfigBuilder.prepare().

Classes

Public Member Functions

Public Attributes

Private Attributes

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation