#include <CSCMotherboard.h>

Inheritance diagram for CSCMotherboard:

Public Member Functions
void	clear ()

	CSCMotherboard (unsigned endcap, unsigned station, unsigned sector, unsigned subsector, unsigned chamber, const edm::ParameterSet &conf)

	CSCMotherboard ()

std::vector< CSCCorrelatedLCTDigi >	getLCTs () const

virtual std::vector< CSCCorrelatedLCTDigi >	readoutLCTs () const

virtual void	run (const CSCWireDigiCollection wiredc, const CSCComparatorDigiCollection compdc)

void	setConfigParameters (const CSCDBL1TPParameters *conf)

	~CSCMotherboard () override=default

Public Member Functions inherited from CSCBaseboard
	CSCBaseboard (unsigned endcap, unsigned station, unsigned sector, unsigned subsector, unsigned chamber, const edm::ParameterSet &conf)

	CSCBaseboard ()

std::string	getCSCName () const

void	setCSCGeometry (const CSCGeometry *g)

virtual	~CSCBaseboard ()=default

Public Attributes
std::unique_ptr< CSCAnodeLCTProcessor >	alctProc

std::unique_ptr< CSCCathodeLCTProcessor >	clctProc

Protected Types
enum	LCT_Quality { INVALID = 0, NO_CLCT = 1, NO_ALCT = 2, CLCT_LAYER_TRIGGER = 3, LOW_QUALITY = 4, MARGINAL_ANODE_CATHODE = 5, HQ_ANODE_MARGINAL_CATHODE = 6, HQ_CATHODE_MARGINAL_ANODE = 7, HQ_ACCEL_ALCT = 8, HQ_RESERVED_1 = 9, HQ_RESERVED_2 = 10, HQ_PATTERN_2_3 = 11, HQ_PATTERN_4_5 = 12, HQ_PATTERN_6_7 = 13, HQ_PATTERN_8_9 = 14, HQ_PATTERN_10 = 15 }

Protected Member Functions
void	checkConfigParameters ()

CSCCorrelatedLCTDigi	constructLCTs (const CSCALCTDigi &aLCT, const CSCCLCTDigi &cLCT, int type, int trknmb) const

void	correlateLCTs (const CSCALCTDigi &bestALCT, const CSCALCTDigi &secondALCT, const CSCCLCTDigi &bestCLCT, const CSCCLCTDigi &secondCLCT, int type)

void	dumpConfigParams () const

unsigned int	encodePattern (const int clctPattern) const

unsigned int	findQuality (const CSCALCTDigi &aLCT, const CSCCLCTDigi &cLCT) const

CSCALCTDigi	getBXShiftedALCT (const CSCALCTDigi &) const

Protected Attributes
unsigned int	alct_trig_enable

std::vector< CSCALCTDigi >	alctV

bool	clct_to_alct

unsigned int	clct_trig_enable

std::vector< CSCCLCTDigi >	clctV

bool	drop_used_alcts

bool	drop_used_clcts

int	early_tbins

CSCCorrelatedLCTDigi	firstLCT [CSCConstants::MAX_LCT_TBINS]

unsigned int	match_trig_enable

unsigned int	match_trig_window_size

unsigned int	mpc_block_me1a

bool	readout_earliest_2

CSCCorrelatedLCTDigi	secondLCT [CSCConstants::MAX_LCT_TBINS]

unsigned int	tmb_l1a_window_size

Protected Attributes inherited from CSCBaseboard
unsigned int	alctClctOffset_

edm::ParameterSet	alctParams_

edm::ParameterSet	clctParams_

edm::ParameterSet	commonParams_

const CSCChamber *	cscChamber_

const CSCGeometry *	cscGeometry_

CSCDetId	cscId_

bool	disableME1a_

bool	enableAlctSLHC_

bool	gangedME1a_

int	infoV

bool	isME11_

bool	isSLHC_

bool	runME11ILT_

bool	runME11Up_

bool	runME21ILT_

bool	runME21Up_

bool	runME31Up_

bool	runME41Up_

unsigned	theChamber

std::string	theCSCName_

const unsigned	theEndcap

unsigned	theRegion

unsigned	theRing

const unsigned	theSector

const unsigned	theStation

const unsigned	theSubsector

const unsigned	theTrigChamber

edm::ParameterSet	tmbParams_

Static Protected Attributes
static const unsigned int	def_alct_trig_enable = 0

static const unsigned int	def_clct_trig_enable = 0

static const unsigned int	def_match_trig_enable = 1

static const unsigned int	def_match_trig_window_size = 7

static const unsigned int	def_mpc_block_me1a = 1

static const unsigned int	def_tmb_l1a_window_size = 7

Detailed Description

Correlates anode and cathode LCTs from the same chamber.

When the Trigger MotherBoard (TMB) is instantiated it instantiates an ALCT and CLCT board. The MotherBoard takes up to two LCTs from each anode and cathode LCT card and combines them into a single Correlated LCT. The output is up to two Correlated LCTs.

It can be run in either a test mode, where the arguments are a collection of wire times and arrays of halfstrip times, or for general use, with wire digi and comparator digi collections as arguments. In the latter mode, the wire & strip info is passed on the LCTProcessors, where it is decoded and converted into a convenient form. After running the anode and cathode LCTProcessors, TMB correlates the anode and cathode LCTs. At present, it simply matches the best CLCT with the best ALCT; perhaps a better algorithm will be determined in the future. The MotherBoard then determines a few more numbers (such as quality and pattern) from the ALCT and CLCT information, and constructs two correlated LCT "digis".

Author: Benn Tannenbaum 28 August 1999 benn@.nosp@m.phys.nosp@m.ics.u.nosp@m.cla..nosp@m.edu

Based on code by Nick Wisniewski (nw@it.nosp@m.s.ca.nosp@m.ltech.nosp@m..edu) and a framework by Darin Acosta (acost.nosp@m.a@ph.nosp@m.ys.uf.nosp@m.l.ed.nosp@m.u).

Numerous later improvements by Jason Mumford and Slava Valuev (see cvs in ORCA). Porting from ORCA by S. Valuev (Slava.nosp@m..Val.nosp@m.uev@c.nosp@m.ern..nosp@m.ch), May 2006.

Definition at line 42 of file CSCMotherboard.h.

Member Enumeration Documentation

enum CSCMotherboard::LCT_Quality

protected

Enumerator
INVALID
NO_CLCT
NO_ALCT
CLCT_LAYER_TRIGGER
LOW_QUALITY
MARGINAL_ANODE_CATHODE
HQ_ANODE_MARGINAL_CATHODE
HQ_CATHODE_MARGINAL_ANODE
HQ_ACCEL_ALCT
HQ_RESERVED_1
HQ_RESERVED_2
HQ_PATTERN_2_3
HQ_PATTERN_4_5
HQ_PATTERN_6_7
HQ_PATTERN_8_9
HQ_PATTERN_10

Definition at line 141 of file CSCMotherboard.h.

                   {
     INVALID  = 0,
     NO_CLCT = 1,
     NO_ALCT = 2,
     CLCT_LAYER_TRIGGER = 3,
     LOW_QUALITY = 4,
     MARGINAL_ANODE_CATHODE = 5,
     HQ_ANODE_MARGINAL_CATHODE = 6,
     HQ_CATHODE_MARGINAL_ANODE = 7,
     HQ_ACCEL_ALCT = 8,
     HQ_RESERVED_1 = 9,
     HQ_RESERVED_2 = 10,
     HQ_PATTERN_2_3 = 11,
     HQ_PATTERN_4_5 = 12,
     HQ_PATTERN_6_7 = 13,
     HQ_PATTERN_8_9 = 14,
     HQ_PATTERN_10 = 15
   };

Constructor & Destructor Documentation

CSCMotherboard::CSCMotherboard	(	unsigned	endcap,
		unsigned	station,
		unsigned	sector,
		unsigned	subsector,
		unsigned	chamber,
		const edm::ParameterSet &	conf
	)

Normal constructor.

Definition at line 12 of file CSCMotherboard.cc.

References alct_trig_enable, alctProc, checkConfigParameters(), clct_to_alct, clct_trig_enable, clctProc, drop_used_alcts, drop_used_clcts, dumpConfigParams(), early_tbins, edm::ParameterSet::getParameter(), CSCBaseboard::infoV, match_trig_enable, match_trig_window_size, mpc_block_me1a, readout_earliest_2, tmb_l1a_window_size, and CSCBaseboard::tmbParams_.

                                                             :
   CSCBaseboard(endcap, station, sector, subsector, chamber, conf)
 {
   // Normal constructor.  -JM
   // Pass ALCT, CLCT, and common parameters on to ALCT and CLCT processors.
   static std::atomic<bool> config_dumped{false};
 
   mpc_block_me1a    = tmbParams_.getParameter<unsigned int>("mpcBlockMe1a");
   alct_trig_enable  = tmbParams_.getParameter<unsigned int>("alctTrigEnable");
   clct_trig_enable  = tmbParams_.getParameter<unsigned int>("clctTrigEnable");
   match_trig_enable = tmbParams_.getParameter<unsigned int>("matchTrigEnable");
   match_trig_window_size =
     tmbParams_.getParameter<unsigned int>("matchTrigWindowSize");
   tmb_l1a_window_size = // Common to CLCT and TMB
     tmbParams_.getParameter<unsigned int>("tmbL1aWindowSize");
 
   // configuration handle for number of early time bins
   early_tbins = tmbParams_.getParameter<int>("tmbEarlyTbins");
 
   // whether to not reuse ALCTs that were used by previous matching CLCTs
   drop_used_alcts = tmbParams_.getParameter<bool>("tmbDropUsedAlcts");
   drop_used_clcts = tmbParams_.getParameter<bool>("tmbDropUsedClcts");
 
   clct_to_alct = tmbParams_.getParameter<bool>("clctToAlct");
 
   // whether to readout only the earliest two LCTs in readout window
   readout_earliest_2 = tmbParams_.getParameter<bool>("tmbReadoutEarliest2");
 
   infoV = tmbParams_.getParameter<int>("verbosity");
 
   alctProc.reset( new CSCAnodeLCTProcessor(endcap, station, sector, subsector, chamber, conf) );
   clctProc.reset( new CSCCathodeLCTProcessor(endcap, station, sector, subsector, chamber, conf) );
 
   // Check and print configuration parameters.
   checkConfigParameters();
   if (infoV > 0 && !config_dumped) {
     dumpConfigParams();
     config_dumped = true;
   }
 }

CSCMotherboard::CSCMotherboard ( )

Constructor for use during testing.

Definition at line 56 of file CSCMotherboard.cc.

References alct_trig_enable, alctProc, checkConfigParameters(), clct_trig_enable, clctProc, def_alct_trig_enable, def_clct_trig_enable, def_match_trig_enable, def_match_trig_window_size, def_mpc_block_me1a, def_tmb_l1a_window_size, dumpConfigParams(), early_tbins, CSCBaseboard::infoV, match_trig_enable, match_trig_window_size, mpc_block_me1a, and tmb_l1a_window_size.

                                :
   CSCBaseboard()
 {
   // Constructor used only for testing.  -JM
   static std::atomic<bool> config_dumped{false};
 
   early_tbins = 4;
 
   alctProc.reset( new CSCAnodeLCTProcessor() );
   clctProc.reset( new CSCCathodeLCTProcessor() );
   mpc_block_me1a      = def_mpc_block_me1a;
   alct_trig_enable    = def_alct_trig_enable;
   clct_trig_enable    = def_clct_trig_enable;
   match_trig_enable   = def_match_trig_enable;
   match_trig_window_size = def_match_trig_window_size;
   tmb_l1a_window_size = def_tmb_l1a_window_size;
 
   infoV = 2;
 
   // Check and print configuration parameters.
   checkConfigParameters();
   if (infoV > 0 && !config_dumped) {
     dumpConfigParams();
     config_dumped = true;
   }
 }

CSCMotherboard::~CSCMotherboard ( )

overridedefault

Default destructor.

Member Function Documentation

void CSCMotherboard::checkConfigParameters ( )

protected

Make sure that the parameter values are within the allowed range.

Definition at line 552 of file CSCMotherboard.cc.

References alct_trig_enable, clct_trig_enable, def_alct_trig_enable, def_clct_trig_enable, def_match_trig_enable, def_match_trig_window_size, def_mpc_block_me1a, def_tmb_l1a_window_size, CSCBaseboard::infoV, match_trig_enable, match_trig_window_size, mpc_block_me1a, and tmb_l1a_window_size.

Referenced by CSCMotherboard(), and setConfigParameters().

 {
   // Make sure that the parameter values are within the allowed range.
 
   // Max expected values.
   static const unsigned int max_mpc_block_me1a      = 1 << 1;
   static const unsigned int max_alct_trig_enable    = 1 << 1;
   static const unsigned int max_clct_trig_enable    = 1 << 1;
   static const unsigned int max_match_trig_enable   = 1 << 1;
   static const unsigned int max_match_trig_window_size = 1 << 4;
   static const unsigned int max_tmb_l1a_window_size = 1 << 4;
 
   // Checks.
   if (mpc_block_me1a >= max_mpc_block_me1a) {
     if (infoV >= 0) edm::LogError("CSCMotherboard|ConfigError")
       << "+++ Value of mpc_block_me1a, " << mpc_block_me1a
       << ", exceeds max allowed, " << max_mpc_block_me1a-1 << " +++\n"
       << "+++ Try to proceed with the default value, mpc_block_me1a="
       << def_mpc_block_me1a << " +++\n";
     mpc_block_me1a = def_mpc_block_me1a;
   }
   if (alct_trig_enable >= max_alct_trig_enable) {
     if (infoV >= 0) edm::LogError("CSCMotherboard|ConfigError")
       << "+++ Value of alct_trig_enable, " << alct_trig_enable
       << ", exceeds max allowed, " << max_alct_trig_enable-1 << " +++\n"
       << "+++ Try to proceed with the default value, alct_trig_enable="
       << def_alct_trig_enable << " +++\n";
     alct_trig_enable = def_alct_trig_enable;
   }
   if (clct_trig_enable >= max_clct_trig_enable) {
     if (infoV >= 0) edm::LogError("CSCMotherboard|ConfigError")
       << "+++ Value of clct_trig_enable, " << clct_trig_enable
       << ", exceeds max allowed, " << max_clct_trig_enable-1 << " +++\n"
       << "+++ Try to proceed with the default value, clct_trig_enable="
       << def_clct_trig_enable << " +++\n";
     clct_trig_enable = def_clct_trig_enable;
   }
   if (match_trig_enable >= max_match_trig_enable) {
     if (infoV >= 0) edm::LogError("CSCMotherboard|ConfigError")
       << "+++ Value of match_trig_enable, " << match_trig_enable
       << ", exceeds max allowed, " << max_match_trig_enable-1 << " +++\n"
       << "+++ Try to proceed with the default value, match_trig_enable="
       << def_match_trig_enable << " +++\n";
     match_trig_enable = def_match_trig_enable;
   }
   if (match_trig_window_size >= max_match_trig_window_size) {
     if (infoV >= 0) edm::LogError("CSCMotherboard|ConfigError")
       << "+++ Value of match_trig_window_size, " << match_trig_window_size
       << ", exceeds max allowed, " << max_match_trig_window_size-1 << " +++\n"
       << "+++ Try to proceed with the default value, match_trig_window_size="
       << def_match_trig_window_size << " +++\n";
     match_trig_window_size = def_match_trig_window_size;
   }
   if (tmb_l1a_window_size >= max_tmb_l1a_window_size) {
     if (infoV >= 0) edm::LogError("CSCMotherboard|ConfigError")
       << "+++ Value of tmb_l1a_window_size, " << tmb_l1a_window_size
       << ", exceeds max allowed, " << max_tmb_l1a_window_size-1 << " +++\n"
       << "+++ Try to proceed with the default value, tmb_l1a_window_size="
       << def_tmb_l1a_window_size << " +++\n";
     tmb_l1a_window_size = def_tmb_l1a_window_size;
   }
 }

void CSCMotherboard::clear ( void )

Clears correlated LCT and passes clear signal on to cathode and anode LCT processors.

Definition at line 83 of file CSCMotherboard.cc.

References alctProc, alctV, clctProc, clctV, CSCCorrelatedLCTDigi::clear(), firstLCT, CSCConstants::MAX_LCT_TBINS, and secondLCT.

Referenced by CSCUpgradeMotherboard::clear(), and run().

 {
   // clear the processors
   if (alctProc) alctProc->clear();
   if (clctProc) clctProc->clear();
 
   // clear the ALCT and CLCT containers
   alctV.clear();
   clctV.clear();
 
   // clear the LCT containers
   for (int bx = 0; bx < CSCConstants::MAX_LCT_TBINS; bx++) {
     firstLCT[bx].clear();
     secondLCT[bx].clear();
   }
 }

CSCCorrelatedLCTDigi CSCMotherboard::constructLCTs	(	const CSCALCTDigi &	aLCT,
		const CSCCLCTDigi &	cLCT,
		int	type,
		int	trknmb
	)		const

protected

Definition at line 470 of file CSCMotherboard.cc.

References encodePattern(), findQuality(), CSCCLCTDigi::getBend(), CSCALCTDigi::getBX(), CSCCLCTDigi::getBX(), getBXShiftedALCT(), CSCCLCTDigi::getKeyStrip(), CSCALCTDigi::getKeyWG(), CSCCLCTDigi::getPattern(), CSCALCTDigi::isValid(), listBenchmarks::pattern, jets_cff::quality, CSCCorrelatedLCTDigi::setType(), and CSCBaseboard::theTrigChamber.

Referenced by CSCUpgradeMotherboard::correlateLCTs(), correlateLCTs(), CSCGEMMotherboardME21::correlateLCTsGEM(), CSCGEMMotherboardME11::correlateLCTsGEM(), and CSCMotherboardME11::correlateLCTsME11().

 {
   // CLCT pattern number
   unsigned int pattern = encodePattern(cLCT.getPattern());
 
   // LCT quality number
   unsigned int quality = findQuality(aLCT, cLCT);
 
   // Bunch crossing: get it from cathode LCT if anode LCT is not there.
   int bx = aLCT.isValid() ? aLCT.getBX() : cLCT.getBX();
 
   // construct correlated LCT
   CSCCorrelatedLCTDigi thisLCT(trknmb, 1, quality, aLCT.getKeyWG(),
                                cLCT.getKeyStrip(), pattern, cLCT.getBend(),
                                bx, 0, 0, 0, theTrigChamber);
   thisLCT.setType(type);
   // make sure to shift the ALCT BX from 8 to 3!
   thisLCT.setALCT(getBXShiftedALCT(aLCT));
   thisLCT.setCLCT(cLCT);
   return thisLCT;
 }

void CSCMotherboard::correlateLCTs	(	const CSCALCTDigi &	bestALCT,
		const CSCALCTDigi &	secondALCT,
		const CSCCLCTDigi &	bestCLCT,
		const CSCCLCTDigi &	secondCLCT,
		int	type
	)

protected

Definition at line 411 of file CSCMotherboard.cc.

References alct_trig_enable, clct_trig_enable, constructLCTs(), firstLCT, CSCCorrelatedLCTDigi::getBX(), CSCBaseboard::infoV, CSCALCTDigi::isValid(), CSCCLCTDigi::isValid(), match_trig_enable, CSCConstants::MAX_LCT_TBINS, and secondLCT.

Referenced by run().

 {
   CSCALCTDigi bestALCT = bALCT;
   CSCALCTDigi secondALCT = sALCT;
   CSCCLCTDigi bestCLCT = bCLCT;
   CSCCLCTDigi secondCLCT = sCLCT;
 
   bool anodeBestValid     = bestALCT.isValid();
   bool anodeSecondValid   = secondALCT.isValid();
   bool cathodeBestValid   = bestCLCT.isValid();
   bool cathodeSecondValid = secondCLCT.isValid();
 
   if (anodeBestValid && !anodeSecondValid)     secondALCT = bestALCT;
   if (!anodeBestValid && anodeSecondValid)     bestALCT   = secondALCT;
   if (cathodeBestValid && !cathodeSecondValid) secondCLCT = bestCLCT;
   if (!cathodeBestValid && cathodeSecondValid) bestCLCT   = secondCLCT;
 
   // ALCT-CLCT matching conditions are defined by "trig_enable" configuration
   // parameters.
   if ((alct_trig_enable  && bestALCT.isValid()) ||
       (clct_trig_enable  && bestCLCT.isValid()) ||
       (match_trig_enable && bestALCT.isValid() && bestCLCT.isValid())) {
     const CSCCorrelatedLCTDigi& lct = constructLCTs(bestALCT, bestCLCT, type, 1);
     int bx = lct.getBX();
     if (bx >= 0 && bx < CSCConstants::MAX_LCT_TBINS) {
       firstLCT[bx] = lct;
     }
     else {
       if (infoV > 0) edm::LogWarning("CSCMotherboard|OutOfTimeLCT")
         << "+++ Bx of first LCT candidate, " << bx
         << ", is not within the allowed range, [0-" << CSCConstants::MAX_LCT_TBINS-1
         << "); skipping it... +++\n";
     }
   }
 
   if (((secondALCT != bestALCT) || (secondCLCT != bestCLCT)) &&
       ((alct_trig_enable  && secondALCT.isValid()) ||
        (clct_trig_enable  && secondCLCT.isValid()) ||
        (match_trig_enable && secondALCT.isValid() && secondCLCT.isValid()))) {
     const CSCCorrelatedLCTDigi& lct = constructLCTs(secondALCT, secondCLCT, type, 2);
     int bx = lct.getBX();
     if (bx >= 0 && bx < CSCConstants::MAX_LCT_TBINS) {
       secondLCT[bx] = lct;
     }
     else {
       if (infoV > 0) edm::LogWarning("CSCMotherboard|OutOfTimeLCT")
         << "+++ Bx of second LCT candidate, " << bx
         << ", is not within the allowed range, [0-" << CSCConstants::MAX_LCT_TBINS-1
         << "); skipping it... +++\n";
     }
   }
 }

void CSCMotherboard::dumpConfigParams ( ) const

protected

Dump TMB/MPC configuration parameters.

Definition at line 615 of file CSCMotherboard.cc.

References alct_trig_enable, clct_trig_enable, LogDebug, match_trig_enable, match_trig_window_size, mpc_block_me1a, and tmb_l1a_window_size.

Referenced by CSCMotherboard(), and setConfigParameters().

                                             {
   std::ostringstream strm;
   strm << "\n";
   strm << "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n";
   strm << "+                   TMB configuration parameters:                  +\n";
   strm << "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n";
   strm << " mpc_block_me1a [block/not block triggers which come from ME1/A] = "
        << mpc_block_me1a << "\n";
   strm << " alct_trig_enable [allow ALCT-only triggers] = "
        << alct_trig_enable << "\n";
   strm << " clct_trig_enable [allow CLCT-only triggers] = "
        << clct_trig_enable << "\n";
   strm << " match_trig_enable [allow matched ALCT-CLCT triggers] = "
        << match_trig_enable << "\n";
   strm << " match_trig_window_size [ALCT-CLCT match window width, in 25 ns] = "
        << match_trig_window_size << "\n";
   strm << " tmb_l1a_window_size [L1Accept window width, in 25 ns bins] = "
        << tmb_l1a_window_size << "\n";
   strm << "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n";
   LogDebug("CSCMotherboard") << strm.str();
 }

unsigned int CSCMotherboard::encodePattern ( const int clctPattern ) const

protected

Definition at line 496 of file CSCMotherboard.cc.

References funct::abs(), and listBenchmarks::pattern.

Referenced by constructLCTs(), and CSCGEMMotherboard::constructLCTsGEM().

 {
   const int kPatternBitWidth = 4;
 
   // In the TMB07 firmware, LCT pattern is just a 4-bit CLCT pattern.
   unsigned int pattern = (abs(ptn) & ((1<<kPatternBitWidth)-1));
 
   return pattern;
 }

unsigned int CSCMotherboard::findQuality	(	const CSCALCTDigi &	aLCT,
		const CSCCLCTDigi &	cLCT
	)		const

protected

Definition at line 507 of file CSCMotherboard.cc.

References CSCALCTDigi::getAccelerator(), CSCCLCTDigi::getPattern(), CSCALCTDigi::getQuality(), CSCCLCTDigi::getQuality(), CSCBaseboard::infoV, CSCALCTDigi::isValid(), CSCCLCTDigi::isValid(), listBenchmarks::pattern, and jets_cff::quality.

Referenced by constructLCTs().

 {
   unsigned int quality = 0;
 
   // 2008 definition.
   if (!(aLCT.isValid()) || !(cLCT.isValid())) {
     if (aLCT.isValid() && !(cLCT.isValid()))      quality = 1; // no CLCT
     else if (!(aLCT.isValid()) && cLCT.isValid()) quality = 2; // no ALCT
     else quality = 0; // both absent; should never happen.
   }
   else {
     int pattern = cLCT.getPattern();
     if (pattern == 1) quality = 3; // layer-trigger in CLCT
     else {
       // CLCT quality is the number of layers hit minus 3.
       // CLCT quality is the number of layers hit.
       bool a4 = (aLCT.getQuality() >= 1);
       bool c4 = (cLCT.getQuality() >= 4);
       //              quality = 4; "reserved for low-quality muons in future"
       if      (!a4 && !c4) quality = 5; // marginal anode and cathode
       else if ( a4 && !c4) quality = 6; // HQ anode, but marginal cathode
       else if (!a4 &&  c4) quality = 7; // HQ cathode, but marginal anode
       else if ( a4 &&  c4) {
         if (aLCT.getAccelerator()) quality = 8; // HQ muon, but accel ALCT
         else {
           // quality =  9; "reserved for HQ muons with future patterns
           // quality = 10; "reserved for HQ muons with future patterns
           if (pattern == 2 || pattern == 3)      quality = 11;
           else if (pattern == 4 || pattern == 5) quality = 12;
           else if (pattern == 6 || pattern == 7) quality = 13;
           else if (pattern == 8 || pattern == 9) quality = 14;
           else if (pattern == 10)                quality = 15;
           else {
             if (infoV >= 0) edm::LogWarning("CSCMotherboard|WrongValues")
                               << "+++ findQuality: Unexpected CLCT pattern id = "
                               << pattern << "+++\n";
           }
         }
       }
     }
   }
   return quality;
 }

CSCALCTDigi CSCMotherboard::getBXShiftedALCT ( const CSCALCTDigi & aLCT ) const

protected

Definition at line 638 of file CSCMotherboard.cc.

References CSCALCTDigi::getBX(), CSCConstants::LCT_CENTRAL_BX, CSCALCTDigi::setBX(), and tmb_l1a_window_size.

Referenced by constructLCTs(), and CSCGEMMotherboard::constructLCTsGEM().

 {
   CSCALCTDigi aLCT_shifted = aLCT;
   aLCT_shifted.setBX(aLCT_shifted.getBX() - (CSCConstants::LCT_CENTRAL_BX - tmb_l1a_window_size/2));
   return aLCT_shifted;
 }

std::vector< CSCCorrelatedLCTDigi > CSCMotherboard::getLCTs ( ) const

Returns vector of all found correlated LCTs, if any.

Definition at line 395 of file CSCMotherboard.cc.

References firstLCT, CSCBaseboard::isME11_, CSCConstants::MAX_LCT_TBINS, mpc_block_me1a, and secondLCT.

Referenced by readoutLCTs().

 {
   std::vector<CSCCorrelatedLCTDigi> tmpV;
 
   // Do not report LCTs found in ME1/A if mpc_block_me1/a is set.
   for (int bx = 0; bx < CSCConstants::MAX_LCT_TBINS; bx++) {
     if (firstLCT[bx].isValid())
       if (!mpc_block_me1a || (!isME11_ || firstLCT[bx].getStrip() <= 127))
         tmpV.push_back(firstLCT[bx]);
     if (secondLCT[bx].isValid())
       if (!mpc_block_me1a || (!isME11_ || secondLCT[bx].getStrip() <= 127))
         tmpV.push_back(secondLCT[bx]);
   }
   return tmpV;
 }

std::vector< CSCCorrelatedLCTDigi > CSCMotherboard::readoutLCTs ( ) const

virtual

Returns vector of correlated LCTs in the read-out time window, if any.

Reimplemented in CSCUpgradeMotherboard, and CSCGEMMotherboardME21.

Definition at line 319 of file CSCMotherboard.cc.

References early_tbins, getLCTs(), CSCBaseboard::infoV, LogDebug, CSCConstants::MAX_LCT_TBINS, readout_earliest_2, and tmb_l1a_window_size.

Referenced by CSCTriggerPrimitivesBuilder::build().

 {
   std::vector<CSCCorrelatedLCTDigi> tmpV;
 
   // The start time of the L1A*LCT coincidence window should be related
   // to the fifo_pretrig parameter, but I am not completely sure how.
   // Just choose it such that the window is centered at bx=7.  This may
   // need further tweaking if the value of tmb_l1a_window_size changes.
   //static int early_tbins = 4;
 
   // Empirical correction to match 2009 collision data (firmware change?)
   int lct_bins   = tmb_l1a_window_size;
   int late_tbins = early_tbins + lct_bins;
 
   int ifois = 0;
   if (ifois == 0) {
     if (infoV >= 0 && early_tbins < 0) {
       edm::LogWarning("CSCMotherboard|SuspiciousParameters")
         << "+++ early_tbins = " << early_tbins
         << "; in-time LCTs are not getting read-out!!! +++" << "\n";
     }
 
     if (late_tbins > CSCConstants::MAX_LCT_TBINS-1) {
       if (infoV >= 0) edm::LogWarning("CSCMotherboard|SuspiciousParameters")
         << "+++ Allowed range of time bins, [0-" << late_tbins
         << "] exceeds max allowed, " << CSCConstants::MAX_LCT_TBINS-1 << " +++\n"
         << "+++ Set late_tbins to max allowed +++\n";
       late_tbins = CSCConstants::MAX_LCT_TBINS-1;
     }
     ifois = 1;
   }
 
   // Start from the vector of all found correlated LCTs and select
   // those within the LCT*L1A coincidence window.
   int bx_readout = -1;
   const std::vector<CSCCorrelatedLCTDigi>& all_lcts = getLCTs();
   for (auto plct = all_lcts.begin(); plct != all_lcts.end(); plct++) {
     if (!plct->isValid()) continue;
 
     int bx = (*plct).getBX();
     // Skip LCTs found too early relative to L1Accept.
     if (bx <= early_tbins) {
       if (infoV > 1) LogDebug("CSCMotherboard")
         << " Do not report correlated LCT on key halfstrip "
         << plct->getStrip() << " and key wire " << plct->getKeyWG()
         << ": found at bx " << bx << ", whereas the earliest allowed bx is "
         << early_tbins+1;
       continue;
     }
 
     // Skip LCTs found too late relative to L1Accept.
     if (bx > late_tbins) {
       if (infoV > 1) LogDebug("CSCMotherboard")
         << " Do not report correlated LCT on key halfstrip "
         << plct->getStrip() << " and key wire " << plct->getKeyWG()
         << ": found at bx " << bx << ", whereas the latest allowed bx is "
         << late_tbins;
       continue;
     }
 
     // If (readout_earliest_2) take only LCTs in the earliest bx in the read-out window:
     // in digi->raw step, LCTs have to be packed into the TMB header, and
     // currently there is room just for two.
     if (readout_earliest_2) {
       if (bx_readout == -1 || bx == bx_readout) {
         tmpV.push_back(*plct);
         if (bx_readout == -1) bx_readout = bx;
       }
     }
     // if readout_earliest_2 == false, save all LCTs
     else tmpV.push_back(*plct);
   }
   return tmpV;
 }

void CSCMotherboard::run	(	const CSCWireDigiCollection *	wiredc,
		const CSCComparatorDigiCollection *	compdc
	)

virtual

Run function for normal usage. Runs cathode and anode LCT processors, takes results and correlates into CorrelatedLCT.

Reimplemented in CSCUpgradeMotherboard, and CSCMotherboardME11.

Definition at line 126 of file CSCMotherboard.cc.

References a, alct_trig_enable, CSCCorrelatedLCTDigi::ALCTCLCT, CSCBaseboard::alctClctOffset_, CSCCorrelatedLCTDigi::ALCTONLY, alctProc, alctV, clct_to_alct, clct_trig_enable, CSCCorrelatedLCTDigi::CLCTALCT, CSCCorrelatedLCTDigi::CLCTONLY, clctProc, clctV, clear(), correlateLCTs(), CSCBaseboard::cscGeometry_, drop_used_alcts, drop_used_clcts, firstLCT, CSCBaseboard::infoV, LogDebug, LogTrace, match_trig_window_size, CSCConstants::MAX_ALCT_TBINS, CSCConstants::MAX_CLCT_TBINS, CSCConstants::MAX_LCT_TBINS, and secondLCT.

Referenced by CSCTriggerPrimitivesBuilder::build().

 {
   // clear the ALCT/CLCT/LCT containers. Clear the processors
   clear();
 
   // Check for existing processors
   if (!( alctProc && clctProc))
   {
     if (infoV >= 0) edm::LogError("CSCMotherboard|SetupError")
       << "+++ run() called for non-existing ALCT/CLCT processor! +++ \n";
     return;
   }
 
   // set geometry
   alctProc->setCSCGeometry(cscGeometry_);
   clctProc->setCSCGeometry(cscGeometry_);
 
   alctV = alctProc->run(wiredc); // run anodeLCT
   clctV = clctProc->run(compdc); // run cathodeLCT
 
   // if there are no ALCTs and no CLCTs, it does not make sense to run this TMB
   if (alctV.empty() and clctV.empty()) return;
 
   // CLCT-centric matching
   if (clct_to_alct){
     int used_alct_mask[20];
     for (int a=0;a<20;++a) used_alct_mask[a]=0;
 
     int bx_alct_matched = 0; // bx of last matched ALCT
     for (int bx_clct = 0; bx_clct < CSCConstants::MAX_CLCT_TBINS;
          bx_clct++) {
       // There should be at least one valid ALCT or CLCT for a
       // correlated LCT to be formed.  Decision on whether to reject
       // non-complete LCTs (and if yes of which type) is made further
       // upstream.
       if (clctProc->bestCLCT[bx_clct].isValid()) {
         // Look for ALCTs within the match-time window.  The window is
         // centered at the CLCT bx; therefore, we make an assumption
         // that anode and cathode hits are perfectly synchronized.  This
         // is always true for MC, but only an approximation when the
         // data is analyzed (which works fairly good as long as wide
         // windows are used).  To get rid of this assumption, one would
         // need to access "full BX" words, which are not readily
         // available.
         bool is_matched = false;
         const int bx_alct_start = bx_clct - match_trig_window_size/2 + alctClctOffset_;
         const int bx_alct_stop  = bx_clct + match_trig_window_size/2 + alctClctOffset_;
 
         for (int bx_alct = bx_alct_start; bx_alct <= bx_alct_stop; bx_alct++) {
           if (bx_alct < 0 || bx_alct >= CSCConstants::MAX_ALCT_TBINS)
             continue;
           // default: do not reuse ALCTs that were used with previous CLCTs
           if (drop_used_alcts && used_alct_mask[bx_alct]) continue;
           if (alctProc->bestALCT[bx_alct].isValid()) {
             if (infoV > 1) LogTrace("CSCMotherboard")
                              << "Successful CLCT-ALCT match: bx_clct = " << bx_clct
                              << "; match window: [" << bx_alct_start << "; " << bx_alct_stop
                              << "]; bx_alct = " << bx_alct;
             correlateLCTs(alctProc->bestALCT[bx_alct], alctProc->secondALCT[bx_alct],
                           clctProc->bestCLCT[bx_clct], clctProc->secondCLCT[bx_clct],
                           CSCCorrelatedLCTDigi::CLCTALCT);
             used_alct_mask[bx_alct] += 1;
             is_matched = true;
             bx_alct_matched = bx_alct;
             break;
           }
         }
         // No ALCT within the match time interval found: report CLCT-only LCT
         // (use dummy ALCTs).
         if (!is_matched and clct_trig_enable) {
           if (infoV > 1) LogTrace("CSCMotherboard")
                            << "Unsuccessful CLCT-ALCT match (CLCT only): bx_clct = "
                            << bx_clct <<" first ALCT "<< clctProc->bestCLCT[bx_clct] 
                            << "; match window: [" << bx_alct_start
                            << "; " << bx_alct_stop << "]";
           correlateLCTs(alctProc->bestALCT[bx_clct], alctProc->secondALCT[bx_clct],
                         clctProc->bestCLCT[bx_clct], clctProc->secondCLCT[bx_clct],
                         CSCCorrelatedLCTDigi::CLCTONLY);
         }
       }
       // No valid CLCTs; attempt to make ALCT-only LCT.  Use only ALCTs
       // which have zeroth chance to be matched at later cathode times.
       // (I am not entirely sure this perfectly matches the firmware logic.)
       // Use dummy CLCTs.
       else {
         int bx_alct = bx_clct - match_trig_window_size/2;
         if (bx_alct >= 0 && bx_alct > bx_alct_matched) {
           if (alctProc->bestALCT[bx_alct].isValid() and alct_trig_enable) {
             if (infoV > 1) LogTrace("CSCMotherboard")
                              << "Unsuccessful CLCT-ALCT match (ALCT only): bx_alct = "
                              << bx_alct;
             correlateLCTs(alctProc->bestALCT[bx_alct], alctProc->secondALCT[bx_alct],
                           clctProc->bestCLCT[bx_clct], clctProc->secondCLCT[bx_clct],
                           CSCCorrelatedLCTDigi::ALCTONLY);
           }
         }
       }
     }
   }
   // ALCT-centric matching
   else {
     int used_clct_mask[20];
     for (int a=0;a<20;++a) used_clct_mask[a]=0;
 
     int bx_clct_matched = 0; // bx of last matched CLCT
     for (int bx_alct = 0; bx_alct < CSCConstants::MAX_ALCT_TBINS;
          bx_alct++) {
       // There should be at least one valid CLCT or ALCT for a
       // correlated LCT to be formed.  Decision on whether to reject
       // non-complete LCTs (and if yes of which type) is made further
       // upstream.
       if (alctProc->bestALCT[bx_alct].isValid()) {
         // Look for CLCTs within the match-time window.  The window is
         // centered at the ALCT bx; therefore, we make an assumption
         // that anode and cathode hits are perfectly synchronized.  This
         // is always true for MC, but only an approximation when the
         // data is analyzed (which works fairly good as long as wide
         // windows are used).  To get rid of this assumption, one would
         // need to access "full BX" words, which are not readily
         // available.
         bool is_matched = false;
         const int bx_clct_start = bx_alct - match_trig_window_size/2 - alctClctOffset_;
         const int bx_clct_stop  = bx_alct + match_trig_window_size/2 - alctClctOffset_;
 
         for (int bx_clct = bx_clct_start; bx_clct <= bx_clct_stop; bx_clct++) {
           if (bx_clct < 0 || bx_clct >= CSCConstants::MAX_CLCT_TBINS)
             continue;
           // default: do not reuse CLCTs that were used with previous ALCTs
           if (drop_used_clcts && used_clct_mask[bx_clct]) continue;
           if (clctProc->bestCLCT[bx_clct].isValid()) {
             if (infoV > 1) LogTrace("CSCMotherboard")
                              << "Successful ALCT-CLCT match: bx_alct = " << bx_alct
                              << "; match window: [" << bx_clct_start << "; " << bx_clct_stop
                              << "]; bx_clct = " << bx_clct;
             correlateLCTs(alctProc->bestALCT[bx_alct], alctProc->secondALCT[bx_alct],
                           clctProc->bestCLCT[bx_clct], clctProc->secondCLCT[bx_clct],
                           CSCCorrelatedLCTDigi::ALCTCLCT);
             used_clct_mask[bx_clct] += 1;
             is_matched = true;
             bx_clct_matched = bx_clct;
             break;
           }
         }
         // No CLCT within the match time interval found: report ALCT-only LCT
         // (use dummy CLCTs).
         if (!is_matched) {
           if (infoV > 1) LogTrace("CSCMotherboard")
                            << "Unsuccessful ALCT-CLCT match (ALCT only): bx_alct = "
                            << bx_alct <<" first ALCT "<< alctProc->bestALCT[bx_alct] 
                            << "; match window: [" << bx_clct_start
                            << "; " << bx_clct_stop << "]";
           if (alct_trig_enable)
           correlateLCTs(alctProc->bestALCT[bx_alct], alctProc->secondALCT[bx_alct],
                         clctProc->bestCLCT[bx_alct], clctProc->secondCLCT[bx_alct],
                         CSCCorrelatedLCTDigi::ALCTONLY);
         }
       }
       // No valid ALCTs; attempt to make CLCT-only LCT.  Use only CLCTs
       // which have zeroth chance to be matched at later cathode times.
       // (I am not entirely sure this perfectly matches the firmware logic.)
       // Use dummy ALCTs.
       else {
         int bx_clct = bx_alct - match_trig_window_size/2;
         if (bx_clct >= 0 && bx_clct > bx_clct_matched) {
           if (clctProc->bestCLCT[bx_clct].isValid() and clct_trig_enable) {
             if (infoV > 1) LogTrace("CSCMotherboard")
                              << "Unsuccessful ALCT-CLCT match (CLCT only): bx_clct = "
                              << bx_clct;
             correlateLCTs(alctProc->bestALCT[bx_alct], alctProc->secondALCT[bx_alct],
                           clctProc->bestCLCT[bx_clct], clctProc->secondCLCT[bx_clct],
                           CSCCorrelatedLCTDigi::CLCTONLY);
           }
         }
       }
     }
   }
 
   // Debug first and second LCTs
   if (infoV > 0) {
     for (int bx = 0; bx < CSCConstants::MAX_LCT_TBINS; bx++) {
       if (firstLCT[bx].isValid())
         LogDebug("CSCMotherboard") << firstLCT[bx];
       if (secondLCT[bx].isValid())
         LogDebug("CSCMotherboard") << secondLCT[bx];
     }
   }
 }

void CSCMotherboard::setConfigParameters ( const CSCDBL1TPParameters * conf )

Set configuration parameters obtained via EventSetup mechanism.

Definition at line 101 of file CSCMotherboard.cc.

References alct_trig_enable, alctProc, checkConfigParameters(), clct_trig_enable, clctProc, dumpConfigParams(), match_trig_enable, match_trig_window_size, mpc_block_me1a, tmb_l1a_window_size, CSCDBL1TPParameters::tmbAlctTrigEnable(), CSCDBL1TPParameters::tmbClctTrigEnable(), CSCDBL1TPParameters::tmbMatchTrigEnable(), CSCDBL1TPParameters::tmbMatchTrigWindowSize(), CSCDBL1TPParameters::tmbMpcBlockMe1a(), and CSCDBL1TPParameters::tmbTmbL1aWindowSize().

 {
   static std::atomic<bool> config_dumped{false};
 
   // Config. parameters for the TMB itself.
   mpc_block_me1a         = conf->tmbMpcBlockMe1a();
   alct_trig_enable       = conf->tmbAlctTrigEnable();
   clct_trig_enable       = conf->tmbClctTrigEnable();
   match_trig_enable      = conf->tmbMatchTrigEnable();
   match_trig_window_size = conf->tmbMatchTrigWindowSize();
   tmb_l1a_window_size    = conf->tmbTmbL1aWindowSize();
 
   // Config. paramteres for ALCT and CLCT processors.
   alctProc->setConfigParameters(conf);
   clctProc->setConfigParameters(conf);
 
   // Check and print configuration parameters.
   checkConfigParameters();
   if (!config_dumped) {
     dumpConfigParams();
     config_dumped = true;
   }
 }