DDHGCalHEAlgo.cc

Go to the documentation of this file.

// File: DDHGCalHEAlgo.cc
// Description: Geometry factory class for HGCal (Mix)

#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include "DetectorDescription/Core/interface/DDutils.h"
#include "DetectorDescription/Core/interface/DDSolid.h"
#include "DetectorDescription/Core/interface/DDCurrentNamespace.h"
#include "DetectorDescription/Core/interface/DDSplit.h"
#include "Geometry/HGCalCommonData/plugins/DDHGCalHEAlgo.h"
#include "Geometry/HGCalCommonData/interface/HGCalGeomTools.h"
#include "Geometry/HGCalCommonData/interface/HGCalParameters.h"
#include "CLHEP/Units/GlobalPhysicalConstants.h"
#include "CLHEP/Units/GlobalSystemOfUnits.h"

//#define EDM_ML_DEBUG

DDHGCalHEAlgo::DDHGCalHEAlgo() {
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: Creating an instance";
#endif
}

DDHGCalHEAlgo::~DDHGCalHEAlgo() { }

void DDHGCalHEAlgo::initialize(const DDNumericArguments & nArgs,
                   const DDVectorArguments & vArgs,
                   const DDMapArguments & ,
                   const DDStringArguments & sArgs,
                   const DDStringVectorArguments &vsArgs) {

  wafers_       = vsArgs["WaferNames"];
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << wafers_.size() 
                << " wafers";
  for (unsigned int i=0; i<wafers_.size(); ++i)
    edm::LogVerbatim("HGCalGeom") << "Wafer[" << i << "] " << wafers_[i];
#endif
  materials_    = vsArgs["MaterialNames"];
  names_        = vsArgs["VolumeNames"];
  thick_        = vArgs["Thickness"];
  for (unsigned int i=0; i<materials_.size(); ++i) {
    copyNumber_.emplace_back(1);
  }
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << materials_.size()
                << " types of volumes";
  for (unsigned int i=0; i<names_.size(); ++i)
    edm::LogVerbatim("HGCalGeom") << "Volume [" << i << "] " << names_[i] 
                  << " of thickness " << thick_[i] 
                  << " filled with " << materials_[i]
                  << " first copy number " << copyNumber_[i];
#endif
  layers_       = dbl_to_int(vArgs["Layers"]);
  layerThick_   = vArgs["LayerThick"];
  rMixLayer_    = vArgs["LayerRmix"];
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "There are " << layers_.size() << " blocks";
  for (unsigned int i=0; i<layers_.size(); ++i)
    edm::LogVerbatim("HGCalGeom") << "Block [" << i << "] of thickness "  
                  << layerThick_[i] << " Rmid " <<rMixLayer_[i]
                  << " with " << layers_[i] << " layers";
#endif
  layerType_    = dbl_to_int(vArgs["LayerType"]);
  layerSense_   = dbl_to_int(vArgs["LayerSense"]);
  firstLayer_   = (int)(nArgs["FirstLayer"]);
  if (firstLayer_ > 0) {
    for (unsigned int i=0; i<layerType_.size(); ++i) {
      if (layerSense_[i] != 0) {
    int ii = layerType_[i];
    copyNumber_[ii] = firstLayer_;
#ifdef EDM_ML_DEBUG
    edm::LogVerbatim("HGCalGeom") << "First copy number for layer type "
                      << i << ":" << ii << " with "
                      << materials_[ii] << " changed to "
                      << copyNumber_[ii];
#endif
    break;
      }
    }
  }
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "There are " << layerType_.size() 
                << " layers" ;
  for (unsigned int i=0; i<layerType_.size(); ++i)
    edm::LogVerbatim("HGCalGeom") << "Layer [" << i << "] with material type " 
                  << layerType_[i] << " sensitive class " 
                  << layerSense_[i];
#endif
  materialsTop_ = vsArgs["TopMaterialNames"];
  namesTop_     = vsArgs["TopVolumeNames"];
  layerThickTop_= vArgs["TopLayerThickness"];
  layerTypeTop_ = dbl_to_int(vArgs["TopLayerType"]);
  for (unsigned int i=0; i<materialsTop_.size(); ++i) {
    copyNumberTop_.emplace_back(1);
  }
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << materialsTop_.size()
                << " types of volumes in the top part";
  for (unsigned int i=0; i<materialsTop_.size(); ++i)
    edm::LogVerbatim("HGCalGeom") << "Volume [" << i << "] " << namesTop_[i] 
                  << " of thickness " << layerThickTop_[i] 
                  << " filled with " << materialsTop_[i]
                  << " first copy number " <<copyNumberTop_[i];
  edm::LogVerbatim("HGCalGeom") << "There are " << layerTypeTop_.size() 
                << " layers in the top part" ;
  for (unsigned int i=0; i<layerTypeTop_.size(); ++i)
    edm::LogVerbatim("HGCalGeom") << "Layer [" << i << "] with material type " 
                  << layerTypeTop_[i];
#endif
  materialsBot_ = vsArgs["BottomMaterialNames"];
  namesBot_     = vsArgs["BottomVolumeNames"];
  layerTypeBot_ = dbl_to_int(vArgs["BottomLayerType"]);
  layerSenseBot_= dbl_to_int(vArgs["BottomLayerSense"]);
  layerThickBot_= vArgs["BottomLayerThickness"];
  for (unsigned int i=0; i<materialsBot_.size(); ++i) {
    copyNumberBot_.emplace_back(1);
  }
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << materialsBot_.size()
                << " types of volumes in the bottom part";
  for (unsigned int i=0; i<materialsBot_.size(); ++i)
    edm::LogVerbatim("HGCalGeom") << "Volume [" << i << "] " << namesBot_[i] 
                  << " of thickness " << layerThickBot_[i] 
                  << " filled with " << materialsBot_[i]
                  << " first copy number " <<copyNumberBot_[i];
  edm::LogVerbatim("HGCalGeom") << "There are " << layerTypeBot_.size() 
                << " layers in the top part" ;
  for (unsigned int i=0; i<layerTypeBot_.size(); ++i)
    edm::LogVerbatim("HGCalGeom") << "Layer [" << i << "] with material type " 
                  << layerTypeBot_[i] << " sensitive class "
                  << layerSenseBot_[i];
#endif
  zMinBlock_    = nArgs["zMinBlock"];
  rad100to200_  = vArgs["rad100to200"];
  rad200to300_  = vArgs["rad200to300"];
  zMinRadPar_   = nArgs["zMinForRadPar"];
  choiceType_   = (int)(nArgs["choiceType"]);
  nCutRadPar_   = (int)(nArgs["nCornerCut"]);
  fracAreaMin_  = nArgs["fracAreaMin"];
  waferSize_    = nArgs["waferSize"];
  waferSepar_   = nArgs["SensorSeparation"];
  sectors_      = (int)(nArgs["Sectors"]);
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: zStart " << zMinBlock_ 
                << " radius for wafer type separation uses "
                << rad100to200_.size() << " parameters; zmin "
                << zMinRadPar_ << " cutoff " << choiceType_
                << ":" << nCutRadPar_ << ":" << fracAreaMin_
                << " wafer width " << waferSize_ 
                << " separations " << waferSepar_
                << " sectors " << sectors_;
  for (unsigned int k=0; k<rad100to200_.size(); ++k)
    edm::LogVerbatim("HGCalGeom") << "[" << k << "] 100-200 " <<rad100to200_[k]
                  << " 200-300 " << rad200to300_[k];
#endif
  slopeB_       = vArgs["SlopeBottom"];
  zFrontB_      = vArgs["ZFrontBottom"];
  rMinFront_    = vArgs["RMinFront"];
  slopeT_       = vArgs["SlopeTop"];
  zFrontT_      = vArgs["ZFrontTop"];
  rMaxFront_    = vArgs["RMaxFront"];
#ifdef EDM_ML_DEBUG
  for (unsigned int i=0; i<slopeB_.size(); ++i)
    edm::LogVerbatim("HGCalGeom") << "Block [" << i << "] Zmin " << zFrontB_[i]
                  << " Rmin " << rMinFront_[i] << " Slope " 
                  << slopeB_[i];
  for (unsigned int i=0; i<slopeT_.size(); ++i)
    edm::LogVerbatim("HGCalGeom") << "Block [" << i << "] Zmin " << zFrontT_[i]
                  << " Rmax " << rMaxFront_[i] << " Slope " 
                  << slopeT_[i];
#endif
  nameSpace_    = DDCurrentNamespace::ns();
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: NameSpace " << nameSpace_;
#endif

  waferType_ = std::make_unique<HGCalWaferType>(rad100to200_, rad200to300_,
                        (waferSize_+waferSepar_), 
                        zMinRadPar_, choiceType_,
                        nCutRadPar_, fracAreaMin_);
}

// DDHGCalHEAlgo methods...

void DDHGCalHEAlgo::execute(DDCompactView& cpv) {
  
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "==>> Constructing DDHGCalHEAlgo...";
  copies_.clear();
#endif
  constructLayers (parent(), cpv);
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << copies_.size() 
                << " different wafer copy numbers";
  int k(0);
  for (std::unordered_set<int>::const_iterator itr=copies_.begin();
       itr != copies_.end(); ++itr,++k) {
    edm::LogVerbatim("HGCalGeom") << "Copy [" << k << "] : " << (*itr);
  }
  copies_.clear();
  edm::LogVerbatim("HGCalGeom") << "<<== End of DDHGCalHEAlgo construction...";
#endif
}

void DDHGCalHEAlgo::constructLayers(const DDLogicalPart& module, 
                    DDCompactView& cpv) {
  
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: \t\tInside Layers";
#endif
  double       zi(zMinBlock_);
  int          laymin(0);
  const double tol(0.01);
  for (unsigned int i=0; i<layers_.size(); i++) {
    double  zo     = zi + layerThick_[i];
    double  routF  = HGCalGeomTools::radius(zi,zFrontT_,rMaxFront_,slopeT_);
    int     laymax = laymin+layers_[i];
    double  zz     = zi;
    double  thickTot(0);
    std::vector<double> pgonZ(2), pgonRin(2), pgonRout(2);
    for (int ly=laymin; ly<laymax; ++ly) {
      int     ii     = layerType_[ly];
      int     copy   = copyNumber_[ii];
      double  hthick = 0.5*thick_[ii];
      double  rinB   = HGCalGeomTools::radius(zo,zFrontB_,rMinFront_,slopeB_);
      zz            += hthick;
      thickTot      += thick_[ii];

      std::string name = names_[ii]+std::to_string(copy);
#ifdef EDM_ML_DEBUG
      edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: Layer " << ly << ":" 
                    << ii << " Front " << zi << ", " << routF
                    << " Back " << zo << ", " << rinB 
                    << " superlayer thickness "
                    << layerThick_[i];
#endif
      DDName matName(DDSplit(materials_[ii]).first, 
             DDSplit(materials_[ii]).second);
      DDMaterial matter(matName);
      DDLogicalPart glog;
      if (layerSense_[ly] == 0) {
    double alpha = CLHEP::pi/sectors_;
    double rmax  = routF*cos(alpha) - tol;
    pgonZ[0]    =-hthick;  pgonZ[1]   = hthick;
    pgonRin[0]  = rinB;    pgonRin[1] = rinB;   
    pgonRout[0] = rmax;    pgonRout[1] = rmax;   
    DDSolid solid = DDSolidFactory::polyhedra(DDName(name, nameSpace_),
                          sectors_,-alpha,CLHEP::twopi,
                          pgonZ, pgonRin, pgonRout);
    glog = DDLogicalPart(solid.ddname(), matter, solid);
#ifdef EDM_ML_DEBUG
    edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << solid.name()
                      << " polyhedra of " << sectors_ 
                      << " sectors covering " 
                      << -alpha/CLHEP::deg << ":" 
                      << (-alpha+CLHEP::twopi)/CLHEP::deg
                      << " with " << pgonZ.size()<<" sections";
    for (unsigned int k=0; k<pgonZ.size(); ++k)
      edm::LogVerbatim("HGCalGeom") << "[" << k << "] z " << pgonZ[k] 
                    << " R " << pgonRin[k] << ":" 
                    << pgonRout[k];
#endif
      } else {
    DDSolid solid = DDSolidFactory::tubs(DDName(name, nameSpace_), 
                         hthick, rinB, routF, 0.0,
                         CLHEP::twopi);
    glog = DDLogicalPart(solid.ddname(), matter, solid);
#ifdef EDM_ML_DEBUG
    edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << solid.name()
                      << " Tubs made of " << matName 
                      << " of dimensions " << rinB 
                      << ", " << routF << ", " << hthick
                      << ", 0.0, " << CLHEP::twopi/CLHEP::deg;
    edm::LogVerbatim("HGCalGeom") << "Position in: " << glog.name() 
                      << " number " << copy;
#endif
    positionMix(glog, name, copy, thick_[ii], matter, rinB, rMixLayer_[i],
            routF, zz, cpv);
      }
      DDTranslation r1(0,0,zz);
      DDRotation rot;
      cpv.position(glog, module, copy, r1, rot);
      ++copyNumber_[ii];
#ifdef EDM_ML_DEBUG
      edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << glog.name()
                    << " number " << copy 
                    << " positioned in " << module.name() 
                    << " at " << r1 << " with " << rot;
#endif
      zz += hthick;
    } // End of loop over layers in a block
    zi     = zo;
    laymin = laymax;
    if (std::abs(thickTot-layerThick_[i]) < 0.00001) {
    } else if (thickTot > layerThick_[i]) {
      edm::LogError("HGCalGeom") << "Thickness of the partition " 
                 << layerThick_[i] << " is smaller than "
                 << thickTot << ": thickness of all its "
                 << "components **** ERROR ****";
    } else if (thickTot < layerThick_[i]) {
      edm::LogWarning("HGCalGeom") << "Thickness of the partition " 
                   << layerThick_[i] << " does not match with "
                   << thickTot << " of the components";
    }
  }   // End of loop over blocks
}

void DDHGCalHEAlgo::positionMix(const DDLogicalPart& glog, 
                const std::string& nameM, int copyM, 
                double thick, const DDMaterial& matter,
                double rin, double rmid, double rout, 
                double zz, DDCompactView& cpv) {
  
  DDLogicalPart glog1;
  DDTranslation tran;
  DDRotation    rot;
  for (unsigned int ly=0; ly<layerTypeTop_.size(); ++ly) {
    int     ii         = layerTypeTop_[ly];
    copyNumberTop_[ii] = copyM;
  }
  for (unsigned int ly=0; ly<layerTypeBot_.size(); ++ly) {
    int     ii         = layerTypeBot_[ly];
    copyNumberBot_[ii] = copyM;
  }
  double hthick = 0.5*thick;
  // Make the top part first
  std::string name = nameM+"Top";
  DDSolid solid = DDSolidFactory::tubs(DDName(name, nameSpace_), 
                       hthick, rmid, rout, 0.0,
                       CLHEP::twopi);
  glog1 = DDLogicalPart(solid.ddname(), matter, solid);
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << solid.name() 
                << " Tubs made of " << matter.name() 
                << " of dimensions " << rmid << ", " << rout 
                << ", " << hthick << ", 0.0, " 
                << CLHEP::twopi/CLHEP::deg;
#endif
  cpv.position(glog1, glog, 1, tran, rot);
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << glog1.name() 
                << " number 1 positioned in " << glog.name() 
                << " at " << tran << " with " << rot;
#endif
  double thickTot(0), zpos(-hthick);
  for (unsigned int ly=0; ly<layerTypeTop_.size(); ++ly) {
    int     ii     = layerTypeTop_[ly];
    int     copy   = copyNumberTop_[ii];
    double hthickl = 0.5*layerThickTop_[ii];
    thickTot      += layerThickTop_[ii];
    name           = namesTop_[ii]+std::to_string(copy);    
#ifdef EDM_ML_DEBUG
    edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: Layer " << ly << ":" << ii
                  << " R " << rmid << ":" << rout << " Thick " 
                  << layerThickTop_[ii];
#endif
    DDName matName(DDSplit(materialsTop_[ii]).first, 
           DDSplit(materialsTop_[ii]).second);
    DDMaterial matter1(matName);
    solid = DDSolidFactory::tubs(DDName(name,nameSpace_), hthickl, rmid, rout,
                 0.0, CLHEP::twopi);
    DDLogicalPart glog2 = DDLogicalPart(solid.ddname(), matter1, solid);
#ifdef EDM_ML_DEBUG
    double eta1 = -log(tan(0.5*atan(rmid/zz)));
    double eta2 = -log(tan(0.5*atan(rout/zz)));
    edm::LogVerbatim("HGCalGeom") << name << " z|rin|rout " << zz << ":" 
                  << rmid << ":" << rout << " eta " << eta1 
                  << ":" << eta2;
    edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << solid.name() 
                  << " Tubs made of " << matName 
                  << " of dimensions " << rmid << ", " << rout
                  << ", " << hthickl <<", 0.0, "
                  << CLHEP::twopi/CLHEP::deg;
#endif
    zpos += hthickl;
    DDTranslation r1(0,0,zpos);
    cpv.position(glog2, glog1, copy, r1, rot);
#ifdef EDM_ML_DEBUG
    edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: Position " << glog2.name()
                  << " number " << copy << " in "
                  << glog1.name() << " at " << r1
                  << " with " << rot;
#endif
    ++copyNumberTop_[ii];
    zpos += hthickl;
  }
  if (std::abs(thickTot-thick) < 0.00001) {
  } else if (thickTot > thick) {
    edm::LogError("HGCalGeom") << "Thickness of the partition "  << thick 
                   << " is smaller than " << thickTot 
                   << ": thickness of all its components in "
                   << "the top part **** ERROR ****";
  } else if (thickTot < thick) {
    edm::LogWarning("HGCalGeom") << "Thickness of the partition " << thick
                 << " does not match with " << thickTot 
                 << " of the components in top part";
  }

  // Make the bottom part next
  name  = nameM+"Bottom";
  solid = DDSolidFactory::tubs(DDName(name, nameSpace_), 
                   hthick, rin, rmid, 0.0, CLHEP::twopi);
  glog1 = DDLogicalPart(solid.ddname(), matter, solid);
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << solid.name() 
                << " Tubs made of " << matter.name() 
                << " of dimensions " << rin << ", " << rmid 
                << ", " << hthick << ", 0.0, " 
                << CLHEP::twopi/CLHEP::deg;
#endif
  cpv.position(glog1, glog, 1, tran, rot);
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << glog1.name() 
                << " number 1 positioned in " << glog.name()
                << " at " << tran << " with " << rot;
#endif
  thickTot = 0;
  zpos     =-hthick;
  for (unsigned int ly=0; ly<layerTypeBot_.size(); ++ly) {
    int     ii     = layerTypeBot_[ly];
    int     copy   = copyNumberBot_[ii];
    double hthickl = 0.5*layerThickBot_[ii];
    thickTot      += layerThickBot_[ii];
    name           = namesBot_[ii]+std::to_string(copy);    
#ifdef EDM_ML_DEBUG
    edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: Layer " << ly << ":" << ii
                  << " R " << rin << ":" << rmid << " Thick " 
                  << layerThickBot_[ii];
#endif
    DDName matName(DDSplit(materialsBot_[ii]).first, 
           DDSplit(materialsBot_[ii]).second);
    DDMaterial matter1(matName);
    solid = DDSolidFactory::tubs(DDName(name,nameSpace_), hthickl, rin, rmid,
                 0.0, CLHEP::twopi);
    DDLogicalPart glog2 = DDLogicalPart(solid.ddname(), matter1, solid);
#ifdef EDM_ML_DEBUG
    double eta1 = -log(tan(0.5*atan(rin/zz)));
    double eta2 = -log(tan(0.5*atan(rmid/zz)));
    edm::LogVerbatim("HGCalGeom") << name << " z|rin|rout " << zz << ":" 
                  << rin << ":" << rmid << " eta " << eta1 
                  << ":" << eta2;
    edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << solid.name() 
                  << " Tubs made of " << matName 
                  << " of dimensions " << rin << ", " << rmid 
                  << ", " << hthickl <<", 0.0, "
                  << CLHEP::twopi/CLHEP::deg;
#endif
    zpos += hthickl;
    DDTranslation r1(0,0,zpos);
    cpv.position(glog2, glog1, copy, r1, rot);
#ifdef EDM_ML_DEBUG
    edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: Position " << glog2.name()
                  << " number " << copy << " in "
                  << glog1.name() << " at " << r1
                  << " with " << rot;
#endif
    if (layerSenseBot_[ly] != 0)
      positionSensitive(glog2,rin,rmid,zz+zpos,layerSenseBot_[ly],cpv);
    zpos += hthickl;
    ++copyNumberBot_[ii];
  }
  if (std::abs(thickTot-thick) < 0.00001) {
  } else if (thickTot > thick) {
    edm::LogError("HGCalGeom") << "Thickness of the partition "  << thick 
                   << " is smaller than " << thickTot 
                   << ": thickness of all its components in "
                   << "the top part **** ERROR ****";
  } else if (thickTot < thick) {
    edm::LogWarning("HGCalGeom") << "Thickness of the partition " << thick
                 << " does not match with " << thickTot 
                 << " of the components in top part";
  }
}

void DDHGCalHEAlgo::positionSensitive(const DDLogicalPart& glog, double rin,
                      double rout, double zpos, int layertype,
                      DDCompactView& cpv) {
  static const double sqrt3 = std::sqrt(3.0);
  double r    = 0.5*(waferSize_ + waferSepar_);
  double R    = 2.0*r/sqrt3;
  double dy   = 0.75*R;
  int    N    = (int)(0.5*rout/r) + 2;
#ifdef EDM_ML_DEBUG
  int    ium(0), ivm(0), iumAll(0), ivmAll(0), kount(0), ntot(0), nin(0);
  std::vector<int>  ntype(6,0);
  edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << glog.ddname() 
                << " rout " << rout << " N " << N 
                << " for maximum u, v";
#endif
  for (int u = -N; u <= N; ++u) {
    int iu = std::abs(u);
    for (int v = -N; v <= N; ++v) {
      int iv = std::abs(v);
      int nr = 2*v;
      int nc =-2*u+v;
      double xpos = nc*r;
      double ypos = nr*dy;
      std::pair<int,int> corner = 
    HGCalGeomTools::waferCorner(xpos, ypos, r, R, rin, rout, false);
#ifdef EDM_ML_DEBUG
      ++ntot;
#endif
      if (corner.first > 0) {
    int type = waferType_->getType(xpos,ypos,zpos);
    int copy = type*1000000 + iv*100 + iu;
    if (u < 0) copy += 10000;
    if (v < 0) copy += 100000;
#ifdef EDM_ML_DEBUG
    if (iu > ium) ium = iu;
    if (iv > ivm) ivm = iv;
    kount++;
    if (copies_.count(copy) == 0) copies_.insert(copy);
#endif
    if (corner.first == (int)(HGCalParameters::k_CornerSize)) {
#ifdef EDM_ML_DEBUG
      if (iu > iumAll) iumAll = iu;
      if (iv > ivmAll) ivmAll = iv;
      ++nin;
#endif
      DDTranslation tran(xpos, ypos, 0.0);
      DDRotation rotation;
      if (layertype > 1) type += 3;
      DDName name = DDName(DDSplit(wafers_[type]).first, 
                   DDSplit(wafers_[type]).second);
      cpv.position(name, glog.ddname(), copy, tran, rotation);
#ifdef EDM_ML_DEBUG
      ++ntype[type];
      edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: " << name 
                    << " number " << copy
                    << " positioned in " << glog.ddname()
                    << " at " << tran 
                    << " with " << rotation;
#endif
    }
      }
    }
  }
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("HGCalGeom") << "DDHGCalHEAlgo: Maximum # of u " << ium 
                << ":" << iumAll << " # of v " << ivm << ":" 
                << ivmAll << " and " << nin << ":" << kount 
                << ":" << ntot << " wafers (" << ntype[0] 
                << ":" << ntype[1] << ":" << ntype[2] << ":"
                << ntype[3] << ":" << ntype[4] << ":"
                << ntype[5] << ") for " << glog.ddname() 
                << " R " << rin << ":" << rout;
#endif
}