#include <EwkMuDQM.h>

Inheritance diagram for EwkMuDQM:

Public Member Functions
void	analyze (const edm::Event &, const edm::EventSetup &) override

	EwkMuDQM (const edm::ParameterSet &)

Public Member Functions inherited from one::DQMEDAnalyzer< T >
	DQMEDAnalyzer ()=default

	DQMEDAnalyzer (DQMEDAnalyzer< T... > const &)=delete

	DQMEDAnalyzer (DQMEDAnalyzer< T... > &&)=delete

	~DQMEDAnalyzer () override=default

Protected Member Functions
void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override

void	dqmBeginRun (const edm::Run &, const edm::EventSetup &) override

void	endRun (const edm::Run &, const edm::EventSetup &) override

void	init_histograms ()

Private Attributes
MonitorElement *	acop_after_

MonitorElement *	acop_before_

double	acopCut_

edm::EDGetTokenT< reco::BeamSpot >	beamSpotTag_

MonitorElement *	dimuonmass_afterZ_

MonitorElement *	dimuonmass_before_

double	dimuonMassMax_

double	dimuonMassMin_

MonitorElement *	dxy1_afterZ_

MonitorElement *	dxy2_afterZ_

MonitorElement *	dxy_after_

MonitorElement *	dxy_before_

double	dxyCut_

double	eJetMin_

MonitorElement *	eta1_afterZ_

MonitorElement *	eta2_afterZ_

MonitorElement *	eta_after_

MonitorElement *	eta_before_

double	etaCut_

MonitorElement *	goodewkmuon1_afterZ_

MonitorElement *	goodewkmuon2_afterZ_

MonitorElement *	goodewkmuon_after_

MonitorElement *	goodewkmuon_before_

HLTPrescaleProvider	hltPrescaleProvider_

bool	isAlsoTrackerMuon_

bool	isCombinedIso_

MonitorElement *	iso1_afterZ_

MonitorElement *	iso2_afterZ_

MonitorElement *	iso_after_

MonitorElement *	iso_before_

double	isoCut03_

bool	isRelativeIso_

bool	isValidHltConfig_

edm::InputTag	jetTag_

edm::EDGetTokenT< edm::View< reco::Jet > >	jetToken_

MonitorElement *	leadingjet_eta_after_

MonitorElement *	leadingjet_eta_afterZ_

MonitorElement *	leadingjet_eta_before_

MonitorElement *	leadingjet_pt_after_

MonitorElement *	leadingjet_pt_afterZ_

MonitorElement *	leadingjet_pt_before_

MonitorElement *	met_after_

MonitorElement *	met_afterZ_

MonitorElement *	met_before_

double	metMax_

double	metMin_

edm::InputTag	metTag_

edm::EDGetTokenT< edm::View< reco::MET > >	metToken_

MonitorElement *	mt_after_

MonitorElement *	mt_before_

double	mtMax_

double	mtMin_

MonitorElement *	muoncharge_after_

MonitorElement *	muoncharge_afterZ_

MonitorElement *	muoncharge_before_

int	muonHitsCut_

edm::EDGetTokenT< edm::View< reco::Muon > >	muonTag_

MonitorElement *	n_zselPt1thr_

MonitorElement *	n_zselPt2thr_

unsigned int	nall

MonitorElement *	ngoodmuons_

unsigned int	nhlt

unsigned int	niso

int	nJetMax_

MonitorElement *	njets_after_

MonitorElement *	njets_afterZ_

MonitorElement *	njets_before_

int	nMatchesCut_

unsigned int	nmet

MonitorElement *	nmuons_

double	normalizedChi2Cut_

MonitorElement *	npfph_

MonitorElement *	nph_

int	nPhoMax_

MonitorElement *	npvs_after_

MonitorElement *	npvs_afterZ_

MonitorElement *	npvs_before_

unsigned int	nrec

unsigned int	nsel

unsigned int	nz

MonitorElement *	pfphEta_

MonitorElement *	pfphPt_

MonitorElement *	phEta_

edm::EDGetTokenT< edm::View< reco::Photon > >	phoTag_

MonitorElement *	phPt_

int	pixelHitsCut_

MonitorElement *	pt1_afterZ_

MonitorElement *	pt2_afterZ_

MonitorElement *	pt_after_

MonitorElement *	pt_before_

double	ptCut_

MonitorElement *	ptDiffPM_afterZ_

MonitorElement *	ptDiffPM_before_

double	ptThrForPhoton_

double	ptThrForZ1_

double	ptThrForZ2_

int	trackerHitsCut_

MonitorElement *	trig_after_

MonitorElement *	trig_before_

std::vector< std::string >	trigPathNames_

edm::EDGetTokenT< edm::TriggerResults >	trigTag_

edm::EDGetTokenT< edm::View< reco::Vertex > >	vertexTag_

MonitorElement *	ztrig_afterZ_

Detailed Description

DQM offline for EWKMu

Definition at line 30 of file EwkMuDQM.h.

Constructor & Destructor Documentation

EwkMuDQM::EwkMuDQM ( const edm::ParameterSet & cfg )

Definition at line 37 of file EwkMuDQM.cc.

References isValidHltConfig_.

     :
       // Input collections
       metTag_(cfg.getUntrackedParameter<edm::InputTag>("METTag",
                                                        edm::InputTag("pfmet"))),
       jetTag_(cfg.getUntrackedParameter<edm::InputTag>(
           "JetTag", edm::InputTag("ak4PFJets"))),
       //trigTag_(consumes<edm::TriggerResults>(
          // cfg.getUntrackedParameter<edm::InputTag>(
              // "TrigTag", edm::InputTag("TriggerResults::HLT")))),
       muonTag_(consumes<edm::View<reco::Muon> >(
           cfg.getUntrackedParameter<edm::InputTag>("MuonTag",
                                                    edm::InputTag("muons")))),
       metToken_(consumes<edm::View<reco::MET> >(
           cfg.getUntrackedParameter<edm::InputTag>("METTag",
                                                    edm::InputTag("pfmet")))),
       jetToken_(consumes<edm::View<reco::Jet> >(
           cfg.getUntrackedParameter<edm::InputTag>(
               "JetTag", edm::InputTag("ak4PFJets")))),
       phoTag_(consumes<edm::View<reco::Photon> >(
           cfg.getUntrackedParameter<edm::InputTag>("phoTag",
                                                    edm::InputTag("photons")))),
       vertexTag_(consumes<edm::View<reco::Vertex> >(
           cfg.getUntrackedParameter<edm::InputTag>(
               "VertexTag", edm::InputTag("offlinePrimaryVertices")))),
       beamSpotTag_(
           consumes<reco::BeamSpot>(cfg.getUntrackedParameter<edm::InputTag>(
               "beamSpotTag", edm::InputTag("offlineBeamSpot")))),
      // trigPathNames_(cfg.getUntrackedParameter<std::vector<std::string> >(
        //   "TrigPathNames")),
 
       // Muon quality cuts
       isAlsoTrackerMuon_(cfg.getUntrackedParameter<bool>(
           "IsAlsoTrackerMuon", true)),  // Glb muon also tracker muon
       dxyCut_(
           cfg.getUntrackedParameter<double>("DxyCut", 0.2)),  // dxy < 0.2 cm
       normalizedChi2Cut_(cfg.getUntrackedParameter<double>(
           "NormalizedChi2Cut", 10.)),  // chi2/ndof (of global fit) <10.0
       trackerHitsCut_(cfg.getUntrackedParameter<int>("TrackerHitsCut",
                                                      11)),  // Tracker Hits >10
       pixelHitsCut_(
           cfg.getUntrackedParameter<int>("PixelHitsCut", 1)),  // Pixel Hits >0
       muonHitsCut_(cfg.getUntrackedParameter<int>("MuonHitsCut",
                                                   1)),  // Valid Muon Hits >0
       nMatchesCut_(cfg.getUntrackedParameter<int>(
           "NMatchesCut", 2)),  // At least 2 Chambers with matches
 
       // W-boson cuts
       isRelativeIso_(cfg.getUntrackedParameter<bool>("IsRelativeIso", true)),
       isCombinedIso_(cfg.getUntrackedParameter<bool>("IsCombinedIso", false)),
       isoCut03_(cfg.getUntrackedParameter<double>("IsoCut03", 0.1)),
       acopCut_(cfg.getUntrackedParameter<double>("AcopCut", 999.)),
       metMin_(cfg.getUntrackedParameter<double>("MetMin", -999999.)),
       metMax_(cfg.getUntrackedParameter<double>("MetMax", 999999.)),
       mtMin_(cfg.getUntrackedParameter<double>("MtMin", 50.)),
       mtMax_(cfg.getUntrackedParameter<double>("MtMax", 200.)),
       ptCut_(cfg.getUntrackedParameter<double>("PtCut", 20.)),
       etaCut_(cfg.getUntrackedParameter<double>("EtaCut", 2.4)),
 
       // Z rejection
       ptThrForZ1_(cfg.getUntrackedParameter<double>("PtThrForZ1", 20.)),
       ptThrForZ2_(cfg.getUntrackedParameter<double>("PtThrForZ2", 10.)),
 
       // Z selection
       dimuonMassMin_(cfg.getUntrackedParameter<double>("dimuonMassMin", 80.)),
       dimuonMassMax_(cfg.getUntrackedParameter<double>("dimuonMassMax", 120.)),
 
       // Top rejection
       eJetMin_(cfg.getUntrackedParameter<double>("EJetMin", 999999.)),
       nJetMax_(cfg.getUntrackedParameter<int>("NJetMax", 999999)),
 
       // Photon cuts
       ptThrForPhoton_(cfg.getUntrackedParameter<double>("ptThrForPhoton", 5.)),
       nPhoMax_(cfg.getUntrackedParameter<int>("nPhoMax", 999999)),
       hltPrescaleProvider_(cfg, consumesCollector(), *this) {
  isValidHltConfig_ = false;
 }

Member Function Documentation

void EwkMuDQM::analyze	(	const edm::Event &	ev,
		const edm::EventSetup &	iSet
	)

override

Definition at line 315 of file EwkMuDQM.cc.

                                                               {
 
   // Muon collection
   Handle<View<Muon> > muonCollection;
   if (!ev.getByToken(muonTag_, muonCollection)) {
     // LogWarning("") << ">>> Muon collection does not exist !!!";
     return;
   }
   unsigned int muonCollectionSize = muonCollection->size();
 
   // Beam spot
   Handle<reco::BeamSpot> beamSpotHandle;
   if (!ev.getByToken(beamSpotTag_, beamSpotHandle)) {
     // LogWarning("") << ">>> No beam spot found !!!";
     return;
   }
 
   // Loop to reject/control Z->mumu is done separately
   unsigned int nmuonsForZ1 = 0;
   unsigned int nmuonsForZ2 = 0;
   bool cosmic = false;
   for (unsigned int i = 0; i < muonCollectionSize; i++) {
     const Muon& mu = muonCollection->at(i);
     if (!mu.isGlobalMuon()) continue;
     double pt = mu.pt();
     double dxy = mu.innerTrack()->dxy(beamSpotHandle->position());
 
     if (fabs(dxy) > 1) {
       cosmic = true;
       break;
     }
 
     if (pt > ptThrForZ1_) nmuonsForZ1++;
     if (pt > ptThrForZ2_) nmuonsForZ2++;
 
     for (unsigned int j = i + 1; j < muonCollectionSize; j++) {
       const Muon& mu2 = muonCollection->at(j);
       if (mu2.isGlobalMuon() && (mu.charge() * mu2.charge() == -1)) {
         const math::XYZTLorentzVector ZRecoGlb(
             mu.px() + mu2.px(), mu.py() + mu2.py(), mu.pz() + mu2.pz(),
             mu.p() + mu2.p());
         dimuonmass_before_->Fill(ZRecoGlb.mass());
         if (mu.charge() > 0) {
           ptDiffPM_before_->Fill(mu.pt() - mu2.pt());
         } else {
           ptDiffPM_before_->Fill(mu2.pt() - mu.pt());
         }
       }
     }
   }
   if (cosmic) return;
 
   LogTrace("") << "> Z rejection: muons above " << ptThrForZ1_
                << " [GeV]: " << nmuonsForZ1;
   LogTrace("") << "> Z rejection: muons above " << ptThrForZ2_
                << " [GeV]: " << nmuonsForZ2;
 
   // MET
   Handle<View<MET> > metCollection;
   if (!ev.getByToken(metToken_, metCollection)) {
     // LogWarning("") << ">>> MET collection does not exist !!!";
     return;
   }
   const MET& met = metCollection->at(0);
   double met_et = met.pt();
   LogTrace("") << ">>> MET, MET_px, MET_py: " << met_et << ", " << met.px()
                << ", " << met.py() << " [GeV]";
   met_before_->Fill(met_et);
 
   // Vertices in the event
   Handle<View<reco::Vertex> > vertexCollection;
   if (!ev.getByToken(vertexTag_, vertexCollection)) {
     LogError("") << ">>> Vertex collection does not exist !!!";
     return;
   }
   unsigned int vertexCollectionSize = vertexCollection->size();
 
   int nvvertex = 0;
   for (unsigned int i = 0; i < vertexCollectionSize; i++) {
     const Vertex& vertex = vertexCollection->at(i);
     if (vertex.isValid()) nvvertex++;
   }
 
   npvs_before_->Fill(nvvertex);
 
  // bool trigger_fired = false;
   //Handle<TriggerResults> triggerResults;
  // if (!ev.getByToken(trigTag_, triggerResults)) {
     // LogWarning("") << ">>> TRIGGER collection does not exist !!!";
    // return;
  // }
  // const edm::TriggerNames& trigNames = ev.triggerNames(*triggerResults);
   //  LogWarning("")<<"Loop over triggers";
 
   //HLTConfigProvider const&  hltConfigProvider = hltPrescaleProvider_.hltConfigProvider();
 
   /*  change faulty logic of triggering
   for (unsigned int i=0; i<triggerResults->size(); i++)
   {
           const std::string trigName = trigNames.triggerName(i);
 
           bool found=false;
           for(unsigned int index=0; index<trigPathNames_.size() && found==false;
   index++) {
                size_t trigPath = trigName.find(trigPathNames_[index]); // 0 if
   found, pos if not
                if (trigPath==0) found=true;
           }
           if(!found) {continue;}
 
           bool prescaled=false;
           for (unsigned int ps= 0; ps<  hltConfigProvider.prescaleSize();
   ps++){
               const unsigned int prescaleValue =
   hltConfigProvider.prescaleValue(ps, trigName) ;
               if (prescaleValue != 1) prescaled =true;
           }
 
           if( triggerResults->accept(i) && !prescaled){   trigger_fired=true;}
                     // LogWarning("")<<"TrigNo: "<<i<<"  "<<found<<"
   "<<trigName<<" ---> FIRED";}
   }
   */
 
   // get the prescale set for this event
   const int prescaleSet = hltPrescaleProvider_.prescaleSet(ev, iSet);
   if (prescaleSet == -1) {
     LogTrace("") << "Failed to determine prescaleSet\n";
     // std::cout << "Failed to determine prescaleSet. Check the GlobalTag in
     // cfg\n";
     return;
   }
 
  // for (unsigned int i = 0;
    //    (i < triggerResults->size()) && (trigger_fired == false); i++) {
     // skip trigger, if it did not fire
     //if (!triggerResults->accept(i)) continue;
 
     // skip trigger, if it is not on our list
     //bool found = false;
     //const std::string trigName = trigNames.triggerName(i);
     //for (unsigned int index = 0;
       //   index < trigPathNames_.size() && found == false; index++) {
      // if (trigName.find(trigPathNames_.at(index)) == 0) found = true;
    // }
    // if (!found) continue;
 
     // skip trigger, if it is prescaled
    /* if (prescaleSet != -1) {
       if (hltConfigProvider.prescaleValue(prescaleSet, trigName) != 1)
         continue;
     } else {
       // prescaleSet is not known.
       // This branch is not needed, if prescaleSet=-1 forces to skip event
       int prescaled = 0;
       for (unsigned int ps = 0;
            !prescaled && (ps < hltConfigProvider.prescaleSize()); ++ps) {
         if (hltConfigProvider.prescaleValue(ps, trigName) != 1) {
           prescaled = 1;
         }
       }
       if (prescaled) {
         // std::cout << "trigger prescaled\n";
         continue;
       }
     }
 */
     // std::cout << "found unprescaled trigger that fired: " << trigName <<
     // "\n";
    // trigger_fired = true;
  // }
   // if (trigger_fired) std::cout << "\n\tGot Trigger\n";
 
  // trig_before_->Fill(trigger_fired);
 
   // Jet collection
   Handle<View<Jet> > jetCollection;
   if (!ev.getByToken(jetToken_, jetCollection)) {
     // LogError("") << ">>> JET collection does not exist !!!";
     return;
   }
   unsigned int jetCollectionSize = jetCollection->size();
   int njets = 0;
   int LEADJET = -1;
   double max_pt = 0;
   for (unsigned int i = 0; i < jetCollectionSize; i++) {
     const Jet& jet = jetCollection->at(i);
     double minDistance = 99999;  // This is in order to use PFJets
     for (unsigned int j = 0; j < muonCollectionSize; j++) {
       const Muon& mu = muonCollection->at(j);
       double distance = sqrt((mu.eta() - jet.eta()) * (mu.eta() - jet.eta()) +
                              (mu.phi() - jet.phi()) * (mu.phi() - jet.phi()));
       if (minDistance > distance) minDistance = distance;
     }
     if (minDistance < 0.3)
       continue;  // 0.3 is the isolation cone around the muon
     if (jet.et() > max_pt) {
       LEADJET = i;
       max_pt = jet.et();
     }
     if (jet.et() > eJetMin_) {
       njets++;
     }
   }
 
   LogTrace("") << ">>> Total number of jets: " << jetCollectionSize;
   LogTrace("") << ">>> Number of jets above " << eJetMin_
                << " [GeV]: " << njets;
   njets_before_->Fill(njets);
   double lead_jet_pt = -1;
   double lead_jet_eta = -100;
   if (LEADJET != -1) {
     const Jet& leadJet = jetCollection->at(LEADJET);
     leadingjet_pt_before_->Fill(leadJet.pt());
     leadingjet_eta_before_->Fill(leadJet.eta());
     lead_jet_pt = leadJet.pt();
     lead_jet_eta = leadJet.eta();
   }
   // Photon Collection
   Handle<View<Photon> > photonCollection;
   if (!ev.getByToken(phoTag_, photonCollection)) {
     // LogError("")
     return;
   }
   unsigned int ngam = 0;
 
   for (unsigned int i = 0; i < photonCollection->size(); i++) {
     const Photon& ph = photonCollection->at(i);
     double photonPt = ph.pt();
     if (photonPt > ptThrForPhoton_) {
       ngam++;
       phEta_->Fill(ph.eta());
     }
     phPt_->Fill(photonPt);
   }
   nph_->Fill(ngam);
   LogTrace("") << " >>> N photons " << ngam << std::endl;
 
   nmuons_->Fill(muonCollectionSize);
 
   // Start counting
   nall++;
 
   // Histograms per event should be done only once, so keep track of them
  // bool hlt_hist_done = false;
  // bool zhlt_hist_done = false;
   bool zjets_hist_done = false;
   bool zfullsel_hist_done = false;
   bool met_hist_done = false;
   bool njets_hist_done = false;
   bool wfullsel_hist_done = false;
 
   // Central W->mu nu selection criteria
   const int NFLAGS = 10;
   bool muon_sel[NFLAGS];
   const int NFLAGSZ = 12;
   bool zmuon_sel[NFLAGSZ];
   bool muon4Z = false;
 
   double number_of_muons = 0;
   double number_of_goodMuons = 0;
 
   for (unsigned int i = 0; i < muonCollectionSize; i++) {
     for (int j = 0; j < NFLAGS; ++j) {
       muon_sel[j] = false;
     }
 
     number_of_muons++;
 
     const Muon& mu = muonCollection->at(i);
     if (!mu.isGlobalMuon()) continue;
     if (mu.globalTrack().isNull()) continue;
     if (mu.innerTrack().isNull()) continue;
 
     LogTrace("") << "> Wsel: processing muon number " << i << "...";
     reco::TrackRef gm = mu.globalTrack();
     reco::TrackRef tk = mu.innerTrack();
 
     // Pt,eta cuts
     double pt = mu.pt();
     double eta = mu.eta();
     LogTrace("") << "\t... pt, eta: " << pt << " [GeV], " << eta;
     ;
     if (pt > ptCut_) muon_sel[0] = true;
     if (fabs(eta) < etaCut_) muon_sel[1] = true;
 
     double charge = mu.charge();
 
     // d0, chi2, nhits quality cuts
     double dxy = gm->dxy(beamSpotHandle->position());
     double normalizedChi2 = gm->normalizedChi2();
     double trackerHits = tk->hitPattern().numberOfValidTrackerHits();
     int pixelHits = tk->hitPattern().numberOfValidPixelHits();
     int muonHits = gm->hitPattern().numberOfValidMuonHits();
     int nMatches = mu.numberOfMatches();
 
     LogTrace("") << "\t... dxy, normalizedChi2, trackerHits, isTrackerMuon?: "
                  << dxy << " [cm], " << normalizedChi2 << ", " << trackerHits
                  << ", " << mu.isTrackerMuon();
     if (fabs(dxy) < dxyCut_) muon_sel[2] = true;
 
     bool quality = true;
 
     if (normalizedChi2 > normalizedChi2Cut_) quality = false;
     if (trackerHits < trackerHitsCut_) quality = false;
     if (pixelHits < pixelHitsCut_) quality = false;
     if (muonHits < muonHitsCut_) quality = false;
     ;
     if (!mu.isTrackerMuon()) quality = false;
     if (nMatches < nMatchesCut_) quality = false;
     muon_sel[3] = quality;
     if (quality) number_of_goodMuons++;
 
     pt_before_->Fill(pt);
     eta_before_->Fill(eta);
     dxy_before_->Fill(dxy);
     muoncharge_before_->Fill(charge);
     goodewkmuon_before_->Fill(quality);
 
     // Charge asymmetry
     // if (quality) {
     //  if (charge>0) ptPlus_before_->Fill(pt);
     //  if (charge<0) ptMinus_before_->Fill(pt);
     //}
 
     // Isolation cuts
     double isovar = mu.isolationR03().sumPt;
     if (isCombinedIso_) {
       isovar += mu.isolationR03().emEt;
       isovar += mu.isolationR03().hadEt;
     }
     if (isRelativeIso_) isovar /= pt;
     if (isovar < isoCut03_) muon_sel[4] = true;
 
     LogTrace("") << "\t... isolation value" << isovar << ", isolated? "
                  << muon_sel[6];
     iso_before_->Fill(isovar);
 
     // HLT (not mtched to muon for the time being)
    // if (trigger_fired) muon_sel[5] = true;
 
     // For Z:
     if (pt > ptThrForZ1_ && fabs(eta) < etaCut_ && fabs(dxy) < dxyCut_ &&
         quality && isovar < isoCut03_) {
       muon4Z = true;
     }
 
     // MET/MT cuts
     double w_et = met_et + mu.pt();
     double w_px = met.px() + mu.px();
     double w_py = met.py() + mu.py();
 
     double massT = w_et * w_et - w_px * w_px - w_py * w_py;
     massT = (massT > 0) ? sqrt(massT) : 0;
 
     LogTrace("") << "\t... W mass, W_et, W_px, W_py: " << massT << ", " << w_et
                  << ", " << w_px << ", " << w_py << " [GeV]";
     if (massT > mtMin_ && massT < mtMax_) muon_sel[5] = true;
     mt_before_->Fill(massT);
     if (met_et > metMin_ && met_et < metMax_) muon_sel[6] = true;
 
     // Acoplanarity cuts
     Geom::Phi<double> deltaphi(mu.phi() - atan2(met.py(), met.px()));
     double acop = deltaphi.value();
     if (acop < 0) acop = -acop;
     acop = M_PI - acop;
     LogTrace("") << "\t... acoplanarity: " << acop;
     if (acop < acopCut_) muon_sel[7] = true;
     acop_before_->Fill(acop);
 
     // Remaining flags (from global event information)
     if (nmuonsForZ1 < 1 || nmuonsForZ2 < 2) muon_sel[8] = true;
     if (njets <= nJetMax_) muon_sel[9] = true;
 
     // Collect necessary flags "per muon"
     int flags_passed = 0;
     for (int j = 0; j < NFLAGS; ++j) {
       if (muon_sel[j]) flags_passed += 1;
     }
 
     // Do N-1 histograms now (and only once for global event quantities)
     if (flags_passed >= (NFLAGS - 1)) {
       if (!muon_sel[0] || flags_passed == NFLAGS) pt_after_->Fill(pt);
       if (!muon_sel[1] || flags_passed == NFLAGS) eta_after_->Fill(eta);
       if (!muon_sel[2] || flags_passed == NFLAGS) dxy_after_->Fill(dxy);
       if (!muon_sel[3] || flags_passed == NFLAGS)
         goodewkmuon_after_->Fill(quality);
       if (!muon_sel[4] || flags_passed == NFLAGS) iso_after_->Fill(isovar);
      // if (!muon_sel[5] || flags_passed == NFLAGS)
      //   if (!hlt_hist_done) trig_after_->Fill(trigger_fired);
       //hlt_hist_done = true;
       if (!muon_sel[5] || flags_passed == NFLAGS) mt_after_->Fill(massT);
       if (!muon_sel[6] || flags_passed == NFLAGS)
         if (!met_hist_done) met_after_->Fill(met_et);
       met_hist_done = true;
       if (!muon_sel[7] || flags_passed == NFLAGS) acop_after_->Fill(acop);
       // no action here for muon_sel[8]
       if (!muon_sel[9] || flags_passed == NFLAGS) {
         if (!njets_hist_done) {
           njets_after_->Fill(njets);
           leadingjet_pt_after_->Fill(lead_jet_pt);
           leadingjet_eta_after_->Fill(lead_jet_eta);
         }
         njets_hist_done = true;
       }
       if (flags_passed == NFLAGS) {
         if (!wfullsel_hist_done) {
           npvs_after_->Fill(nvvertex);
           muoncharge_after_->Fill(charge);
           // if (charge>0) ptPlus_afterW_->Fill(pt);
           // if (charge<0) ptMinus_afterW_->Fill(pt);
         }
         wfullsel_hist_done = true;
       }
     }
 
     // The cases in which the event is rejected as a Z are considered
     // independently:
     if (muon4Z && !muon_sel[8]) {
 
       // Plots for 2 muons
       for (unsigned int j = i + 1; j < muonCollectionSize; j++) {
 
         for (int ij = 0; ij < NFLAGSZ; ++ij) {
           zmuon_sel[ij] = false;
         }
 
         for (int ji = 0; ji < 5; ++ji) {
           zmuon_sel[ji] = muon_sel[ji];
         }
 
         const Muon& mu2 = muonCollection->at(j);
         if (!mu2.isGlobalMuon()) continue;
         if (mu2.charge() * charge != -1) continue;
         reco::TrackRef gm2 = mu2.globalTrack();
         reco::TrackRef tk2 = mu2.innerTrack();
         double pt2 = mu2.pt();
         if (pt2 > ptThrForZ2_) zmuon_sel[5] = true;
         double eta2 = mu2.eta();
         if (fabs(eta2) < etaCut_) zmuon_sel[6] = true;
         double dxy2 = gm2->dxy(beamSpotHandle->position());
         if (fabs(dxy2) < dxyCut_) zmuon_sel[7] = true;
         double normalizedChi22 = gm2->normalizedChi2();
         double trackerHits2 = tk2->hitPattern().numberOfValidTrackerHits();
         int pixelHits2 = tk2->hitPattern().numberOfValidPixelHits();
         int muonHits2 = gm2->hitPattern().numberOfValidMuonHits();
         int nMatches2 = mu2.numberOfMatches();
         bool quality2 = true;
         if (normalizedChi22 > normalizedChi2Cut_) quality2 = false;
         if (trackerHits2 < trackerHitsCut_) quality2 = false;
         if (pixelHits2 < pixelHitsCut_) quality2 = false;
         if (muonHits2 < muonHitsCut_) quality2 = false;
         if (!mu2.isTrackerMuon()) quality2 = false;
         if (nMatches2 < nMatchesCut_) quality2 = false;
         zmuon_sel[8] = quality2;
         double isovar2 = mu2.isolationR03().sumPt;
         if (isCombinedIso_) {
           isovar2 += mu2.isolationR03().emEt;
           isovar2 += mu2.isolationR03().hadEt;
         }
         if (isRelativeIso_) isovar2 /= pt2;
         if (isovar2 < isoCut03_) zmuon_sel[9] = true;
       //  if (trigger_fired) zmuon_sel[10] = true;
         const math::XYZTLorentzVector ZRecoGlb(
             mu.px() + mu2.px(), mu.py() + mu2.py(), mu.pz() + mu2.pz(),
             mu.p() + mu2.p());
         if (ZRecoGlb.mass() > dimuonMassMin_ &&
             ZRecoGlb.mass() < dimuonMassMax_)
           zmuon_sel[10] = true;
 
         // jet flag
         if (njets <= nJetMax_) zmuon_sel[11] = true;
 
         // start filling histos: N-1 plots
         int flags_passed_z = 0;
 
         for (int jj = 0; jj < NFLAGSZ; ++jj) {
           if (zmuon_sel[jj]) ++flags_passed_z;
         }
 
         if (flags_passed_z >= (NFLAGSZ - 1)) {
           if (!zmuon_sel[0] || flags_passed_z == NFLAGSZ) {
             pt1_afterZ_->Fill(pt);
           }
           if (!zmuon_sel[1] || flags_passed_z == NFLAGSZ) {
             eta1_afterZ_->Fill(eta);
           }
           if (!zmuon_sel[2] || flags_passed_z == NFLAGSZ) {
             dxy1_afterZ_->Fill(dxy);
           }
           if (!zmuon_sel[3] || flags_passed_z == NFLAGSZ) {
             goodewkmuon1_afterZ_->Fill(quality);
           }
           if (!zmuon_sel[4] || flags_passed_z == NFLAGSZ) {
             iso1_afterZ_->Fill(isovar);
           }
           if (!zmuon_sel[5] || flags_passed_z == NFLAGSZ) {
             pt2_afterZ_->Fill(pt2);
           }
           if (!zmuon_sel[6] || flags_passed_z == NFLAGSZ) {
             eta2_afterZ_->Fill(eta2);
           }
           if (!zmuon_sel[7] || flags_passed_z == NFLAGSZ) {
             dxy2_afterZ_->Fill(dxy2);
           }
           if (!zmuon_sel[8] || flags_passed_z == NFLAGSZ) {
             goodewkmuon2_afterZ_->Fill(quality2);
           }
           if (!zmuon_sel[9] || flags_passed_z == NFLAGSZ) {
             iso2_afterZ_->Fill(isovar2);
           }
      //     if (!zmuon_sel[10] || flags_passed_z == NFLAGSZ) {
        //     if (!zhlt_hist_done) ztrig_afterZ_->Fill(trigger_fired);
          //   zhlt_hist_done = true;
         //  }
           if (!zmuon_sel[10] || flags_passed_z == NFLAGSZ) {
             dimuonmass_afterZ_->Fill(ZRecoGlb.mass());
           }
           if (!zmuon_sel[11] || flags_passed_z == NFLAGSZ) {
             if (!zjets_hist_done) {
               njets_afterZ_->Fill(njets);
               leadingjet_pt_afterZ_->Fill(lead_jet_pt);
               leadingjet_eta_afterZ_->Fill(lead_jet_eta);
             }
             zjets_hist_done = true;
           }
           if (flags_passed_z == NFLAGSZ) {
             met_afterZ_->Fill(met_et);
             if (!zfullsel_hist_done) {
               npvs_afterZ_->Fill(nvvertex);
               muoncharge_afterZ_->Fill(charge);
               if (charge > 0) {
                 // ptPlus_afterZ_->Fill(mu.pt());
                 // ptMinus_afterZ_->Fill(mu2.pt());
                 ptDiffPM_afterZ_->Fill(mu.pt() - mu2.pt());
               } else {
                 // ptPlus_afterZ_->Fill(mu2.pt());
                 // ptMinus_afterZ_->Fill(mu.pt());
                 ptDiffPM_afterZ_->Fill(mu2.pt() - mu.pt());
               }
             }
             zfullsel_hist_done = true;
           }
         }
       }
     }
   }
 
   if (zfullsel_hist_done) {
     // here was a Z candidate
     n_zselPt1thr_->Fill(nmuonsForZ1);
     n_zselPt2thr_->Fill(nmuonsForZ2);
   }
 
   // nmuons_->Fill(number_of_muons);
   // nmuons_->Fill(muonCollectionSize);
   ngoodmuons_->Fill(number_of_goodMuons);
 
   return;
 }

void EwkMuDQM::bookHistograms	(	DQMStore::IBooker &	ibooker,
		edm::Run const &	,
		edm::EventSetup const &
	)

overrideprotected

\ For Z-boson events

Definition at line 133 of file EwkMuDQM.cc.

References acop_after_, acop_before_, DQMStore::IBooker::book1D(), dimuonmass_afterZ_, dimuonmass_before_, dxy1_afterZ_, dxy2_afterZ_, dxy_after_, dxy_before_, eJetMin_, eta1_afterZ_, eta2_afterZ_, eta_after_, eta_before_, goodewkmuon1_afterZ_, goodewkmuon2_afterZ_, goodewkmuon_after_, goodewkmuon_before_, isCombinedIso_, iso1_afterZ_, iso2_afterZ_, iso_after_, iso_before_, isRelativeIso_, jetTag_, edm::InputTag::label(), leadingjet_eta_after_, leadingjet_eta_afterZ_, leadingjet_eta_before_, leadingjet_pt_after_, leadingjet_pt_afterZ_, leadingjet_pt_before_, M_PI, met_after_, met_afterZ_, met_before_, metTag_, mt_after_, mt_before_, muoncharge_after_, muoncharge_afterZ_, muoncharge_before_, n_zselPt1thr_, n_zselPt2thr_, ngoodmuons_, njets_after_, njets_afterZ_, njets_before_, nmuons_, nph_, npvs_after_, npvs_afterZ_, npvs_before_, phEta_, phPt_, pt1_afterZ_, pt2_afterZ_, pt_after_, pt_before_, ptDiffPM_afterZ_, ptDiffPM_before_, ptThrForPhoton_, ptThrForZ1_, ptThrForZ2_, and DQMStore::IBooker::setCurrentFolder().

                                          {
 
   ibooker.setCurrentFolder("Physics/EwkMuDQM");
 
   char chtitle[256] = "";
 
   pt_before_ = ibooker.book1D("PT_BEFORECUTS",
       "Muon transverse momentum (global muon) [GeV]", 100, 0., 100.);
   pt_after_ = ibooker.book1D("PT_AFTERWCUTS",
     "Muon transverse momentum (global muon) [GeV]", 100, 0., 100.);
 
   eta_before_ = ibooker.book1D("ETA_BEFORECUTS",
     "Muon pseudo-rapidity", 50, -2.5, 2.5);
   eta_after_ = ibooker.book1D("ETA_AFTERWCUTS",
     "Muon pseudo-rapidity", 50, -2.5, 2.5);
 
   dxy_before_ = ibooker.book1D("DXY_BEFORECUTS",
       "Muon transverse distance to beam spot [cm]", 100, -0.5, 0.5);
   dxy_after_ = ibooker.book1D("DXY_AFTERWCUTS",
     "Muon transverse distance to beam spot [cm]", 100, -0.5, 0.5);
 
   goodewkmuon_before_ = ibooker.book1D("GOODEWKMUON_BEFORECUTS",
       "Quality-muon flag", 2, -0.5, 1.5);
   goodewkmuon_after_ = ibooker.book1D("GOODEWKMUON_AFTERWCUTS",
       "Quality-muon flag", 2, -0.5, 1.5);
 
   if (isRelativeIso_) {
     if (isCombinedIso_) {
       iso_before_ = ibooker.book1D("ISO_BEFORECUTS",
           "Relative (combined) isolation variable", 100, 0., 1.);
       iso_after_ = ibooker.book1D("ISO_AFTERWCUTS",
           "Relative (combined) isolation variable", 100, 0., 1.);
     } else {
       iso_before_ = ibooker.book1D("ISO_BEFORECUTS",
           "Relative (tracker) isolation variable", 100, 0., 1.);
       iso_after_ = ibooker.book1D("ISO_AFTERWCUTS",
           "Relative (tracker) isolation variable", 100, 0., 1.);
     }
   } else {
     if (isCombinedIso_) {
       iso_before_ = ibooker.book1D("ISO_BEFORECUTS",
           "Absolute (combined) isolation variable [GeV]", 100, 0., 20.);
       iso_after_ = ibooker.book1D("ISO_AFTERWCUTS",
           "Absolute (combined) isolation variable [GeV]", 100, 0., 20.);
     } else {
       iso_before_ = ibooker.book1D("ISO_BEFORECUTS",
           "Absolute (tracker) isolation variable [GeV]", 100, 0., 20.);
       iso_after_ = ibooker.book1D("ISO_AFTERWCUTS",
           "Absolute (tracker) isolation variable [GeV]", 100, 0., 20.);
     }
   }
 
 /*  trig_before_ = ibooker.book1D("TRIG_BEFORECUTS",
       "Trigger response (boolean of muon triggers)", 2, -0.5, 1.5);
   trig_after_ = ibooker.book1D("TRIG_AFTERWCUTS",
       "Trigger response (boolean of muon triggers)", 2, -0.5, 1.5);
 */
   snprintf(chtitle, 255, "Transverse mass (%s) [GeV]", metTag_.label().data());
   mt_before_ = ibooker.book1D("MT_BEFORECUTS", chtitle, 150, 0., 300.);
   mt_after_ = ibooker.book1D("MT_AFTERWCUTS", chtitle, 150, 0., 300.);
 
   snprintf(chtitle, 255, "Missing transverse energy (%s) [GeV]",
       metTag_.label().data());
   met_before_ = ibooker.book1D("MET_BEFORECUTS", chtitle, 100, 0., 200.);
   met_after_ = ibooker.book1D("MET_AFTERWCUTS", chtitle, 100, 0., 200.);
   met_afterZ_ = ibooker.book1D("MET_AFTERZCUTS", chtitle, 100, 0., 200.);
 
   snprintf(chtitle, 255, "MU-MET (%s) acoplanarity", metTag_.label().data());
   acop_before_ = ibooker.book1D("ACOP_BEFORECUTS", chtitle, 50, 0., M_PI);
   acop_after_ = ibooker.book1D("ACOP_AFTERWCUTS", chtitle, 50, 0., M_PI);
 
   snprintf(chtitle, 255, "Z selection: muons above %.2f GeV", ptThrForZ1_);
   n_zselPt1thr_ = ibooker.book1D("NZSELPT1THR", chtitle, 10, -0.5, 9.5);
   snprintf(chtitle, 255, "Z selection: muons above %.2f GeV", ptThrForZ2_);
   n_zselPt2thr_ = ibooker.book1D("NZSELPT2THR", chtitle, 10, -0.5, 9.5);
 
   snprintf(chtitle, 255, "Number of jets (%s) above %.2f GeV",
       jetTag_.label().data(), eJetMin_);
   njets_before_ = ibooker.book1D("NJETS_BEFORECUTS", chtitle, 16, -0.5, 15.5);
   njets_after_ = ibooker.book1D("NJETS_AFTERWCUTS", chtitle, 16, -0.5, 15.5);
   njets_afterZ_ = ibooker.book1D("NJETS_AFTERZCUTS", chtitle, 16, -0.5, 15.5);
 
   leadingjet_pt_before_ = ibooker.book1D("LEADINGJET_PT_BEFORECUTS",
       "Leading Jet transverse momentum", 300, 0., 300.);
   leadingjet_pt_after_ = ibooker.book1D("LEADINGJET_PT_AFTERWCUTS",
       "Leading Jet transverse momentum", 300, 0., 300.);
   leadingjet_pt_afterZ_ = ibooker.book1D("LEADINGJET_PT_AFTERZCUTS",
       "Leading Jet transverse momentum", 300, 0., 300.);
 
   leadingjet_eta_before_ = ibooker.book1D("LEADINGJET_ETA_BEFORECUTS",
     "Leading Jet pseudo-rapidity", 50, -2.5, 2.5);
   leadingjet_eta_after_ = ibooker.book1D("LEADINGJET_ETA_AFTERWCUTS",
     "Leading Jet pseudo-rapidity", 50, -2.5, 2.5);
   leadingjet_eta_afterZ_ = ibooker.book1D("LEADINGJET_ETA_AFTERZCUTS",
     "Leading Jet pseudo-rapidity", 50, -2.5, 2.5);
 
   ptDiffPM_before_ = ibooker.book1D("PTDIFFPM_BEFORE_CUTS",
       "pt(Muon+)-pt(Muon-) after Z cuts [GeV]", 200, -100., 100.);
   ptDiffPM_afterZ_ = ibooker.book1D("PTDIFFPM_AFTERZ_CUTS",
       "pt(Muon+)-pt(Muon-) after Z cuts [GeV]", 200, -100., 100.);
 
   pt1_afterZ_ = ibooker.book1D("PT1_AFTERZCUTS",
       "Muon transverse momentum (global muon) [GeV]", 100, 0., 100.);
   eta1_afterZ_ = ibooker.book1D("ETA1_AFTERZCUTS",
       "Muon pseudo-rapidity", 50, -2.5, 2.5);
   dxy1_afterZ_ = ibooker.book1D("DXY1_AFTERZCUTS",
       "Muon transverse distance to beam spot [cm]", 100, -0.5, 0.5);
   goodewkmuon1_afterZ_ = ibooker.book1D("GOODEWKMUON1_AFTERZCUTS",
       "Quality-muon flag", 2, -0.5, 1.5);
 
   if (isRelativeIso_) {
     if (isCombinedIso_) {
       iso1_afterZ_ = ibooker.book1D("ISO1_AFTERZCUTS",
           "Relative (combined) isolation variable", 100, 0., 1.);
       iso2_afterZ_ = ibooker.book1D("ISO2_AFTERZCUTS",
           "Relative (combined) isolation variable", 100, 0., 1.);
     } else {
       iso1_afterZ_ = ibooker.book1D("ISO1_AFTERZCUTS",
           "Relative (tracker) isolation variable", 100, 0., 1.);
       iso2_afterZ_ = ibooker.book1D("ISO2_AFTERZCUTS",
           "Relative (tracker) isolation variable", 100, 0., 1.);
     }
   } else {
     if (isCombinedIso_) {
       iso1_afterZ_ = ibooker.book1D("ISO1_AFTERZCUTS",
         "Absolute (combined) isolation variable [GeV]", 100, 0., 20.);
       iso2_afterZ_ = ibooker.book1D("ISO2_AFTERZCUTS",
         "Absolute (combined) isolation variable [GeV]", 100, 0., 20.);
     } else {
       iso1_afterZ_ = ibooker.book1D("ISO1_AFTERZCUTS",
         "Absolute (tracker) isolation variable [GeV]", 100, 0., 20.);
       iso2_afterZ_ = ibooker.book1D("ISO2_AFTERZCUTS",
         "Absolute (tracker) isolation variable [GeV]", 100, 0., 20.);
     }
   }
 
   pt2_afterZ_ = ibooker.book1D("PT2_AFTERZCUTS",
       "Muon transverse momentum (global muon) [GeV]", 100, 0., 100.);
   eta2_afterZ_ = ibooker.book1D("ETA2_AFTERZCUTS",
       "Muon pseudo-rapidity", 50, -2.5, 2.5);
   dxy2_afterZ_ = ibooker.book1D("DXY2_AFTERZCUTS",
       "Muon transverse distance to beam spot [cm]", 100, -0.5, 0.5);
   goodewkmuon2_afterZ_ = ibooker.book1D("GOODEWKMUON2_AFTERZCUTS",
       "Quality-muon flag", 2, -0.5, 1.5);
 /*  ztrig_afterZ_ = ibooker.book1D("ZTRIG_AFTERZCUTS",
       "Trigger response (boolean of muon triggers)", 2, -0.5, 1.5);
  */
   dimuonmass_before_ = ibooker.book1D("DIMUONMASS_BEFORECUTS",
       "DiMuonMass (2 globals)", 100, 0, 200);
   dimuonmass_afterZ_ = ibooker.book1D("DIMUONMASS_AFTERZCUTS",
       "DiMuonMass (2 globals)", 100, 0, 200);
   npvs_before_ = ibooker.book1D("NPVs_BEFORECUTS",
       "Number of Valid Primary Vertices", 51, -0.5, 50.5);
   npvs_after_ = ibooker.book1D("NPVs_AFTERWCUTS",
     "Number of Valid Primary Vertices", 51, -0.5, 50.5);
   npvs_afterZ_ = ibooker.book1D("NPVs_AFTERZCUTS",
     "Number of Valid Primary Vertices", 51, -0.5, 50.5);
   muoncharge_before_ = ibooker.book1D("MUONCHARGE_BEFORECUTS",
     "Muon Charge", 3, -1.5, 1.5);
   muoncharge_after_ = ibooker.book1D("MUONCHARGE_AFTERWCUTS",
     "Muon Charge", 3, -1.5, 1.5);
   muoncharge_afterZ_ = ibooker.book1D("MUONCHARGE_AFTERZCUTS",
     "Muon Charge", 3, -1.5, 1.5);
 
   // Adding these to replace the NZ ones (more useful, since they are more
   // general?)
   nmuons_ = ibooker.book1D("NMuons",
       "Number of muons in the event", 10, -0.5, 9.5);
   ngoodmuons_ = ibooker.book1D("NGoodMuons",
       "Number of muons passing the quality criteria", 10, -0.5, 9.5);
 
   nph_ = ibooker.book1D("nph", "Number of photons in the event", 20, 0., 20.);
   phPt_ = ibooker.book1D("phPt", "Photon transverse momentum [GeV]", 100, 0.,1000.);
   snprintf(chtitle, 255, "Photon pseudorapidity (pT>%4.1f)", ptThrForPhoton_);
   phEta_ = ibooker.book1D("phEta", chtitle, 100, -2.5, 2.5);
 }

void EwkMuDQM::dqmBeginRun	(	const edm::Run &	iRun,
		const edm::EventSetup &	iSet
	)

overrideprotected

Definition at line 116 of file EwkMuDQM.cc.

References hltPrescaleProvider_, HLTPrescaleProvider::init(), isValidHltConfig_, nall, nhlt, niso, nmet, nrec, nsel, and nz.

                                                                   {
   nall = 0;
   nsel = 0;
   nz = 0;
 
   nrec = 0;
   niso = 0;
   nhlt = 0;
   nmet = 0;
 
   // passed as parameter to HLTConfigProvider::init(), not yet used
   bool isConfigChanged = false;
   // isValidHltConfig_ used to short-circuit analyze() in case of problems
   isValidHltConfig_ =
       hltPrescaleProvider_.init(iRun, iSet, "HLT", isConfigChanged);
 }