#include <CSCCathodeLCTProcessor.h>

Public Types
enum	CLCT_INDICES { CLCT_PATTERN, CLCT_BEND, CLCT_STRIP, CLCT_BX, CLCT_STRIP_TYPE, CLCT_QUALITY, CLCT_CFEB, CLCT_NUM_QUANTITIES = 7 }

Public Member Functions
void	clear ()

	CSCCathodeLCTProcessor (unsigned endcap, unsigned station, unsigned sector, unsigned subsector, unsigned chamber, const edm::ParameterSet &conf, const edm::ParameterSet &comm, const edm::ParameterSet &ctmb)

	CSCCathodeLCTProcessor ()

std::vector< CSCCLCTDigi >	getCLCTs ()

bool	getDigis (const CSCComparatorDigiCollection *compdc)

void	getDigis (const CSCComparatorDigiCollection *compdc, const CSCDetId &id)

std::vector< int >	preTriggerBXs () const

std::vector< CSCCLCTPreTriggerDigi >	preTriggerDigis () const

std::vector< CSCCLCTDigi >	readoutCLCTs ()

std::vector< CSCCLCTDigi >	run (const CSCComparatorDigiCollection *compdc)

void	run (const std::vector< int > halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], const std::vector< int > distrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS])

void	setConfigParameters (const CSCDBL1TPParameters *conf)

void	setCSCGeometry (const CSCGeometry *g)

void	setRing (unsigned r)

Static Public Member Functions
static void	distripStagger (int stag_triad[CSCConstants::MAX_NUM_STRIPS_7CFEBS], int stag_time[CSCConstants::MAX_NUM_STRIPS_7CFEBS], int stag_digi[CSCConstants::MAX_NUM_STRIPS_7CFEBS], int i_distrip, bool debug=false)

Public Attributes
CSCCLCTDigi	bestCLCT [CSCConstants::MAX_CLCT_TBINS]

CSCCLCTDigi	secondCLCT [CSCConstants::MAX_CLCT_TBINS]

Static Public Attributes
static const int	pattern [CSCConstants::NUM_CLCT_PATTERNS_PRE_TMB07][CSCConstants::MAX_STRIPS_IN_PATTERN+1]

static const int	pattern2007 [CSCConstants::NUM_CLCT_PATTERNS][CSCConstants::MAX_HALFSTRIPS_IN_PATTERN+2]

static const int	pattern2007_offset [CSCConstants::MAX_HALFSTRIPS_IN_PATTERN]

static const int	pre_hit_pattern [2][CSCConstants::MAX_STRIPS_IN_PATTERN]

Private Member Functions
void	checkConfigParameters ()

void	dumpConfigParams () const

void	dumpDigis (const std::vector< int > strip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], const int stripType, const int nStrips) const

std::vector< CSCCLCTDigi >	findLCTs (const std::vector< int > strip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], int stripType)

std::vector< CSCCLCTDigi >	findLCTs (const std::vector< int > halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], const std::vector< int > distrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS])

std::vector< CSCCLCTDigi >	findLCTs (const std::vector< int > halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS])

std::vector< CSCCLCTDigi >	findLCTsSLHC (const std::vector< int > halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS])

int	findNumLayersHit (std::vector< int > stripsHit[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS])

void	getKeyStripData (const std::vector< int > strip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], int keystrip_data[CSCConstants::NUM_HALF_STRIPS_7CFEBS][7], int nStrips, int first_bx, int &best_strip, int stripType)

void	getKeyStripData (const unsigned int h_pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], const unsigned int d_pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], int keystrip_data[2][7], const int first_bx)

void	getPattern (int pattern_num, int strip_value[CSCConstants::MAX_STRIPS_IN_PATTERN], int bx_time, int &quality, int &bend)

void	getPattern (unsigned int pattern_num, const int strip_value[CSCConstants::MAX_STRIPS_IN_PATTERN], unsigned int &quality, unsigned int &bend)

bool	hitIsGood (int hitTime, int BX)

void	latchLCTs (const unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], int keyStrip[CSCConstants::MAX_CFEBS], unsigned int nhits[CSCConstants::MAX_CFEBS], const int stripType, const int nStrips, const int bx_time)

void	markBusyKeys (const int best_hstrip, const int best_patid, int quality[CSCConstants::NUM_HALF_STRIPS_7CFEBS])

bool	preTrigger (const std::vector< int > strip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], const int stripType, const int nStrips, int &first_bx)

bool	preTrigger (const std::vector< int > strip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], const int stripType, const int nStrips, const int start_bx, int &first_bx)

bool	preTrigger (const unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], const int start_bx, int &first_bx)

bool	preTrigLookUp (const unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], const int stripType, const int nStrips, const unsigned int bx_time)

void	printPatterns ()

void	priorityEncode (const int h_keyStrip[CSCConstants::MAX_CFEBS], const unsigned int h_nhits[CSCConstants::MAX_CFEBS], const int d_keyStrip[CSCConstants::MAX_CFEBS], const unsigned int d_nhits[CSCConstants::MAX_CFEBS], int keystrip_data[2][7])

bool	ptnFinding (const unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], const int nStrips, const unsigned int bx_time)

void	pulseExtension (const std::vector< int > time[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], const int nStrips, unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS])

void	readComparatorDigis (std::vector< int >halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS], std::vector< int > distrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS])

void	readComparatorDigis (std::vector< int > halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS])

void	setDefaultConfigParameters ()

void	testDistripStagger ()

void	testLCTs ()

void	testPatterns ()

Private Attributes
unsigned int	alctClctOffset

unsigned int	best_pid [CSCConstants::NUM_HALF_STRIPS_7CFEBS]

unsigned int	clct_state_machine_zone

const CSCGeometry *	csc_g

std::vector< CSCComparatorDigi >	digiV [CSCConstants::NUM_LAYERS]

bool	disableME1a

unsigned int	drift_delay

bool	dynamic_state_machine_zone

int	early_tbins

unsigned int	fifo_pretrig

unsigned int	fifo_tbins

int	first_bx_corrected [CSCConstants::NUM_HALF_STRIPS_7CFEBS]

bool	gangedME1a

unsigned int	hit_persist

int	infoV

bool	isME11

bool	isMTCC

bool	ispretrig [CSCConstants::NUM_HALF_STRIPS_7CFEBS]

bool	isSLHC

bool	isTMB07

unsigned int	min_separation

unsigned int	nhits [CSCConstants::NUM_HALF_STRIPS_7CFEBS]

unsigned int	nplanes_hit_pattern

unsigned int	nplanes_hit_pretrig

int	numStrips

unsigned int	pid_thresh_pretrig

unsigned int	pretrig_trig_zone

bool	readout_earliest_2

bool	smartME1aME1b

int	stagger [CSCConstants::NUM_LAYERS]

int	start_bx_shift

unsigned int	theChamber

const unsigned	theEndcap

std::vector< int >	thePreTriggerBXs

std::vector< CSCCLCTPreTriggerDigi >	thePreTriggerDigis

unsigned int	theRing

const unsigned	theSector

const unsigned	theStation

const unsigned	theSubsector

const unsigned	theTrigChamber

unsigned int	tmb_l1a_window_size

bool	use_corrected_bx

bool	use_dead_time_zoning

Static Private Attributes
static const int	cfeb_strips [2]

static const unsigned int	def_drift_delay = 2

static const unsigned int	def_fifo_pretrig = 7

static const unsigned int	def_fifo_tbins = 12

static const unsigned int	def_hit_persist = 6

static const unsigned int	def_min_separation = 10

static const unsigned int	def_nplanes_hit_pattern = 4

static const unsigned int	def_nplanes_hit_pretrig = 2

static const unsigned int	def_pid_thresh_pretrig = 2

static const unsigned int	def_tmb_l1a_window_size = 7

Detailed Description

This class simulates the functionality of the cathode LCT card. It is run by the MotherBoard and returns up to two CathodeLCTs. It can be run either in a test mode, where it is passed arrays of halfstrip and distrip times, or in normal mode where it determines the time and comparator information from the comparator digis.

The CathodeLCTs come in distrip and halfstrip flavors; they are sorted (from best to worst) as follows: 6/6H, 5/6H, 6/6D, 4/6H, 5/6D, 4/6D.

Date: May 2001 Removed the card boundaries. Changed the Pretrigger to emulate the hardware electronic logic. Also changed the keylayer to be the 4th layer in a chamber instead of the 3rd layer from the interaction region. The code is a more realistic simulation of hardware LCT logic now. -Jason Mumford.

Author: Benn Tannenbaum UCLA 13 July 1999 benn@.nosp@m.phys.nosp@m.ics.u.nosp@m.cla..nosp@m.edu Numerous later improvements by Jason Mumford and Slava Valuev (see cvs in ORCA). Porting from ORCA by S. Valuev (Slava.nosp@m..Val.nosp@m.uev@c.nosp@m.ern..nosp@m.ch), May 2006.

Updates for high pileup running by Vadim Khotilovich (TAMU), December 2012

Updates for integrated local trigger with GEMs by Sven Dildick (TAMU) and Tao Huang (TAMU), April 2015

Removing usage of outdated class CSCTriggerGeometry by Sven Dildick (TAMU)

Definition at line 45 of file CSCCathodeLCTProcessor.h.

Member Enumeration Documentation

enum CSCCathodeLCTProcessor::CLCT_INDICES

Enumerator
CLCT_PATTERN
CLCT_BEND
CLCT_STRIP
CLCT_BX
CLCT_STRIP_TYPE
CLCT_QUALITY
CLCT_CFEB
CLCT_NUM_QUANTITIES

Definition at line 114 of file CSCCathodeLCTProcessor.h.

                     {CLCT_PATTERN,
                      CLCT_BEND,
                      CLCT_STRIP,
                      CLCT_BX,
                      CLCT_STRIP_TYPE,
                      CLCT_QUALITY,
                      CLCT_CFEB,
                      CLCT_NUM_QUANTITIES= 7};

Constructor & Destructor Documentation

CSCCathodeLCTProcessor::CSCCathodeLCTProcessor	(	unsigned	endcap,
		unsigned	station,
		unsigned	sector,
		unsigned	subsector,
		unsigned	chamber,
		const edm::ParameterSet &	conf,
		const edm::ParameterSet &	comm,
		const edm::ParameterSet &	ctmb
	)

Normal constructor.

Definition at line 240 of file CSCCathodeLCTProcessor.cc.

References alctClctOffset, CSCTriggerNumbering::chamberFromTriggerLabels(), checkConfigParameters(), CSCConstants::CLCT_EMUL_TIME_OFFSET, clct_state_machine_zone, disableME1a, drift_delay, dumpConfigParams(), dynamic_state_machine_zone, early_tbins, edm::ParameterSet::existsAs(), fifo_pretrig, fifo_tbins, gangedME1a, edm::ParameterSet::getParameter(), hit_persist, infoV, isME11, isMTCC, isSLHC, isTMB07, min_separation, nplanes_hit_pattern, nplanes_hit_pretrig, CSCConstants::NUM_LAYERS, numStrips, pid_thresh_pretrig, pretrig_trig_zone, readout_earliest_2, CSCTriggerNumbering::ringFromTriggerLabels(), smartME1aME1b, stagger, start_bx_shift, theChamber, thePreTriggerDigis, theRing, theSector, theStation, theSubsector, theTrigChamber, tmb_l1a_window_size, use_corrected_bx, and use_dead_time_zoning.

                                                         :
              theEndcap(endcap), theStation(station), theSector(sector),
                      theSubsector(subsector), theTrigChamber(chamber) {
   static std::atomic<bool> config_dumped{false};
 
   // CLCT configuration parameters.
   fifo_tbins   = conf.getParameter<unsigned int>("clctFifoTbins");
   hit_persist  = conf.getParameter<unsigned int>("clctHitPersist");
   drift_delay  = conf.getParameter<unsigned int>("clctDriftDelay");
   nplanes_hit_pretrig =
     conf.getParameter<unsigned int>("clctNplanesHitPretrig");
   nplanes_hit_pattern =
     conf.getParameter<unsigned int>("clctNplanesHitPattern");
 
   // Not used yet.
   fifo_pretrig = conf.getParameter<unsigned int>("clctFifoPretrig");
 
   // Defines pre-2007 version of the CLCT algorithm used in test beams and
   // MTCC.
   isMTCC       = comm.getParameter<bool>("isMTCC");
 
   // TMB07 firmware used since 2007: switch and config. parameters.
   isTMB07      = comm.getParameter<bool>("isTMB07");
 
   // Flag for SLHC studies
   isSLHC       = comm.getParameter<bool>("isSLHC");
 
   // shift the BX from 7 to 8
   // the unpacked real data CLCTs have central BX at bin 7
   // however in simulation the central BX  is bin 8
   // to make a proper comparison with ALCTs we need
   // CLCT and ALCT to have the central BX in the same bin
   // this shift does not affect the readout of the CLCTs
   // emulated CLCTs put in the event should be centered at bin 7 (as in data)                
   alctClctOffset = comm.getParameter<unsigned int>("alctClctOffset");
 
   // special configuration parameters for ME11 treatment
   smartME1aME1b = comm.getParameter<bool>("smartME1aME1b");
   disableME1a = comm.getParameter<bool>("disableME1a");
   gangedME1a = comm.getParameter<bool>("gangedME1a");
 
   if (isSLHC && !smartME1aME1b) edm::LogError("L1CSCTPEmulatorConfigError")
     << "+++ SLHC upgrade configuration is used (isSLHC=True) but smartME1aME1b=False!\n"
     << "Only smartME1aME1b algorithm is so far supported for upgrade! +++\n";
 
   if (isTMB07) {
     pid_thresh_pretrig =
       conf.getParameter<unsigned int>("clctPidThreshPretrig");
     min_separation    =
       conf.getParameter<unsigned int>("clctMinSeparation");
 
     start_bx_shift = conf.getParameter<int>("clctStartBxShift");
   }
 
   if (smartME1aME1b) {
     // use of localized dead-time zones
     use_dead_time_zoning = conf.existsAs<bool>("useDeadTimeZoning")?conf.getParameter<bool>("useDeadTimeZoning"):true;
     clct_state_machine_zone = conf.existsAs<unsigned int>("clctStateMachineZone")?conf.getParameter<unsigned int>("clctStateMachineZone"):8;
     dynamic_state_machine_zone = conf.existsAs<bool>("useDynamicStateMachineZone")?conf.getParameter<bool>("useDynamicStateMachineZone"):true;
 
     // how far away may trigger happen from pretrigger
     pretrig_trig_zone = conf.existsAs<unsigned int>("clctPretriggerTriggerZone")?conf.getParameter<unsigned int>("clctPretriggerTriggerZone"):5;
 
     // whether to calculate bx as corrected_bx instead of pretrigger one
     use_corrected_bx = conf.existsAs<bool>("clctUseCorrectedBx")?conf.getParameter<bool>("clctUseCorrectedBx"):true;
   }
 
   // Motherboard parameters: common for all configurations.
   tmb_l1a_window_size = // Common to CLCT and TMB
     ctmb.getParameter<unsigned int>("tmbL1aWindowSize");
 
   // separate handle for early time bins
   early_tbins = ctmb.getParameter<int>("tmbEarlyTbins");
   if (early_tbins<0) early_tbins  = fifo_pretrig - CSCConstants::CLCT_EMUL_TIME_OFFSET;
 
   // wether to readout only the earliest two LCTs in readout window
   readout_earliest_2 = ctmb.getParameter<bool>("tmbReadoutEarliest2");
 
   // Verbosity level, set to 0 (no print) by default.
   infoV        = conf.getParameter<int>("verbosity");
 
   // Check and print configuration parameters.
   checkConfigParameters();
   if ((infoV > 0 || isSLHC) && !config_dumped) {
     //std::cerr<<"**** CLCT constructor parameters dump ****"<<std::endl;
     dumpConfigParams();
     config_dumped = true;
   }
 
   numStrips = 0; // Will be set later.
   // Provisional, but should be OK for all stations except ME1.
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
     if ((i_layer+1)%2 == 0) stagger[i_layer] = 0;
     else                    stagger[i_layer] = 1;
   }
 
   theRing = CSCTriggerNumbering::ringFromTriggerLabels(theStation, theTrigChamber);
 
   theChamber = CSCTriggerNumbering::chamberFromTriggerLabels(theSector, theSubsector,
                                                              theStation, theTrigChamber);
 
   // trigger numbering doesn't distinguish between ME1a and ME1b chambers:
   isME11 = (theStation == 1 && theRing == 1);
 
   //if (theStation==1 && theRing==2) infoV = 3;
 
   //if (theStation == 2 && theSector == 1 &&
   //    theRing == 1 &&
   //    theChamber == 1) {
   //  testPatterns();
   //  testLCTs();
   //  printPatterns();
   //}
   thePreTriggerDigis.clear();
 }

CSCCathodeLCTProcessor::CSCCathodeLCTProcessor ( )

Default constructor. Used for testing.

Definition at line 367 of file CSCCathodeLCTProcessor.cc.

References checkConfigParameters(), clct_state_machine_zone, disableME1a, dumpConfigParams(), early_tbins, gangedME1a, infoV, isME11, isMTCC, isTMB07, CSCConstants::MAX_NUM_STRIPS, CSCConstants::NUM_LAYERS, numStrips, CSCTriggerNumbering::ringFromTriggerLabels(), setDefaultConfigParameters(), smartME1aME1b, stagger, start_bx_shift, thePreTriggerDigis, theRing, theStation, theTrigChamber, and use_dead_time_zoning.

                                                :
              theEndcap(1), theStation(1), theSector(1),
                      theSubsector(1), theTrigChamber(1) {
   // constructor for debugging.
   static std::atomic<bool> config_dumped{false};
 
   // CLCT configuration parameters.
   setDefaultConfigParameters();
   infoV =  2;
   isMTCC  = false;
   isTMB07 = true;
 
   smartME1aME1b = false;
   disableME1a = false;
   gangedME1a = true;
 
   early_tbins = 4;
 
   start_bx_shift = 0;
   use_dead_time_zoning = true;
   clct_state_machine_zone = 8;
 
   // Check and print configuration parameters.
   checkConfigParameters();
   if (!config_dumped) {
     //std::cerr<<"**** CLCT default constructor parameters dump ****"<<std::endl;
     dumpConfigParams();
     config_dumped = true;
   }
 
   numStrips = CSCConstants::MAX_NUM_STRIPS;
   // Should be OK for all stations except ME1.
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
     if ((i_layer+1)%2 == 0) stagger[i_layer] = 0;
     else                    stagger[i_layer] = 1;
   }
 
   theRing = CSCTriggerNumbering::ringFromTriggerLabels(theStation, theTrigChamber);
   isME11 = (theStation == 1 && theRing == 1);
 
   thePreTriggerDigis.clear();
 }

Member Function Documentation

void CSCCathodeLCTProcessor::checkConfigParameters ( )

private

Make sure that the parameter values are within the allowed range.

Definition at line 457 of file CSCCathodeLCTProcessor.cc.

References def_drift_delay, def_fifo_pretrig, def_fifo_tbins, def_hit_persist, def_min_separation, def_nplanes_hit_pattern, def_nplanes_hit_pretrig, def_pid_thresh_pretrig, def_tmb_l1a_window_size, drift_delay, fifo_pretrig, fifo_tbins, hit_persist, infoV, isTMB07, min_separation, nplanes_hit_pattern, nplanes_hit_pretrig, CSCConstants::NUM_HALF_STRIPS_7CFEBS, pid_thresh_pretrig, and tmb_l1a_window_size.

Referenced by CSCCathodeLCTProcessor(), and setConfigParameters().

                                                    {
   // Make sure that the parameter values are within the allowed range.
 
   // Max expected values.
   static const unsigned int max_fifo_tbins   = 1 << 5;
   static const unsigned int max_fifo_pretrig = 1 << 5;
   static const unsigned int max_hit_persist  = 1 << 4;
   static const unsigned int max_drift_delay  = 1 << 2;
   static const unsigned int max_nplanes_hit_pretrig = 1 << 3;
   static const unsigned int max_nplanes_hit_pattern = 1 << 3;
   static const unsigned int max_pid_thresh_pretrig  = 1 << 4;
   static const unsigned int max_min_separation = CSCConstants::NUM_HALF_STRIPS_7CFEBS;
   static const unsigned int max_tmb_l1a_window_size = 1 << 4;
 
   // Checks.
   if (fifo_tbins >= max_fifo_tbins) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of fifo_tbins, " << fifo_tbins
       << ", exceeds max allowed, " << max_fifo_tbins-1 << " +++\n"
       << "+++ Try to proceed with the default value, fifo_tbins="
       << def_fifo_tbins << " +++\n";
     fifo_tbins = def_fifo_tbins;
   }
   if (fifo_pretrig >= max_fifo_pretrig) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of fifo_pretrig, " << fifo_pretrig
       << ", exceeds max allowed, " << max_fifo_pretrig-1 << " +++\n"
       << "+++ Try to proceed with the default value, fifo_pretrig="
       << def_fifo_pretrig << " +++\n";
     fifo_pretrig = def_fifo_pretrig;
   }
   if (hit_persist >= max_hit_persist) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of hit_persist, " << hit_persist
       << ", exceeds max allowed, " << max_hit_persist-1 << " +++\n"
       << "+++ Try to proceed with the default value, hit_persist="
       << def_hit_persist << " +++\n";
     hit_persist = def_hit_persist;
   }
   if (drift_delay >= max_drift_delay) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of drift_delay, " << drift_delay
       << ", exceeds max allowed, " << max_drift_delay-1 << " +++\n"
       << "+++ Try to proceed with the default value, drift_delay="
       << def_drift_delay << " +++\n";
     drift_delay = def_drift_delay;
   }
   if (nplanes_hit_pretrig >= max_nplanes_hit_pretrig) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of nplanes_hit_pretrig, " << nplanes_hit_pretrig
       << ", exceeds max allowed, " << max_nplanes_hit_pretrig-1 << " +++\n"
       << "+++ Try to proceed with the default value, nplanes_hit_pretrig="
       << def_nplanes_hit_pretrig << " +++\n";
     nplanes_hit_pretrig = def_nplanes_hit_pretrig;
   }
   if (nplanes_hit_pattern >= max_nplanes_hit_pattern) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of nplanes_hit_pattern, " << nplanes_hit_pattern
       << ", exceeds max allowed, " << max_nplanes_hit_pattern-1 << " +++\n"
       << "+++ Try to proceed with the default value, nplanes_hit_pattern="
       << def_nplanes_hit_pattern << " +++\n";
     nplanes_hit_pattern = def_nplanes_hit_pattern;
   }
 
   if (isTMB07) {
     if (pid_thresh_pretrig >= max_pid_thresh_pretrig) {
       if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
     << "+++ Value of pid_thresh_pretrig, " << pid_thresh_pretrig
     << ", exceeds max allowed, " << max_pid_thresh_pretrig-1 << " +++\n"
     << "+++ Try to proceed with the default value, pid_thresh_pretrig="
     << def_pid_thresh_pretrig << " +++\n";
       pid_thresh_pretrig = def_pid_thresh_pretrig;
     }
     if (min_separation >= max_min_separation) {
       if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
     << "+++ Value of min_separation, " << min_separation
     << ", exceeds max allowed, " << max_min_separation-1 << " +++\n"
     << "+++ Try to proceed with the default value, min_separation="
     << def_min_separation << " +++\n";
       min_separation = def_min_separation;
     }
   }
 
   if (tmb_l1a_window_size >= max_tmb_l1a_window_size) {
     if (infoV > 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of tmb_l1a_window_size, " << tmb_l1a_window_size
       << ", exceeds max allowed, " << max_tmb_l1a_window_size-1 << " +++\n"
       << "+++ Try to proceed with the default value, tmb_l1a_window_size="
       << def_tmb_l1a_window_size << " +++\n";
     tmb_l1a_window_size = def_tmb_l1a_window_size;
   }
 }

void CSCCathodeLCTProcessor::clear ( void )

Clears the LCT containers.

Definition at line 550 of file CSCCathodeLCTProcessor.cc.

References bestCLCT, CSCCLCTDigi::clear(), CSCConstants::MAX_CLCT_TBINS, secondCLCT, thePreTriggerBXs, and thePreTriggerDigis.

                                    {
   thePreTriggerDigis.clear();
   thePreTriggerBXs.clear();
   for (int bx = 0; bx < CSCConstants::MAX_CLCT_TBINS; bx++) {
     bestCLCT[bx].clear();
     secondCLCT[bx].clear();
   }
 }

void CSCCathodeLCTProcessor::distripStagger	(	int	stag_triad[CSCConstants::MAX_NUM_STRIPS_7CFEBS],
		int	stag_time[CSCConstants::MAX_NUM_STRIPS_7CFEBS],
		int	stag_digi[CSCConstants::MAX_NUM_STRIPS_7CFEBS],
		int	i_distrip,
		bool	debug = `false`
	)

static

Definition at line 1107 of file CSCCathodeLCTProcessor.cc.

References LogDebug, and CSCConstants::MAX_NUM_STRIPS.

Referenced by preTriggerDigis(), readComparatorDigis(), and testDistripStagger().

                                             {
   // Author: Jason Mumford (mumford@physics.ucla.edu)
   // This routine takes care of the stagger situation where there is a hit
   // on the right half-strip of a di-strip.  If there is a stagger, then
   // we must associate that distrip with the next distrip. The situation
   // gets more complicated if the next distrip also has a hit on its right
   // half-strip.  One could imagine a whole chain of these in which case
   // we need to go into this routine recursively.  The formula is that
   // while this condition is satisfied, we enquire the next distrip,
   // until we have a hit on any other halfstrip (or triad!=3).  Then we
   // must compare the 2 different bx times and take the smallest one.
   // Afterwards, we must cycle out of the routine assigning the bx times
   // to the one strip over.
 
   // Used only for pre-TMB07 firmware.
 
   if (i_strip >= CSCConstants::MAX_NUM_STRIPS) {
     if (debug) edm::LogWarning("L1CSCTPEmulatorWrongInput")
       << "+++ Found wrong strip number = " << i_strip
       << "; cannot apply distrip staggering... +++\n";
     return;
   }
 
   if (debug)
     LogDebug("CSCCathodeLCTProcessor")
       << " Enter distripStagger: i_strip = " << i_strip
       << " stag_triad[i_strip] = "   << stag_triad[i_strip]
       << " stag_time[i_strip] =  "   << stag_time[i_strip]
       << " stag_triad[i_strip+2] = " << stag_triad[i_strip+2]
       << " stag_time[i_strip+2] = "  << stag_time[i_strip+2];
 
   // So if the next distrip has a stagger hit, go into the routine again
   // for the next distrip.
   if (i_strip+2 < CSCConstants::MAX_NUM_STRIPS && stag_triad[i_strip+2] == 1)
     distripStagger(stag_triad, stag_time, stag_digi, i_strip+2);
 
   // When we have reached a distrip that does not have a staggered hit,
   // if it has a hit, we compare the bx times of the
   // staggered distrip with the non-staggered distrip and we take the
   // smallest of the two and assign it to the shifted distrip time.
   if (stag_time[i_strip+2] >= 0) {
     if (stag_time[i_strip] < stag_time[i_strip+2]) {
       stag_time[i_strip+2] = stag_time[i_strip];
       stag_digi[i_strip+2] = stag_digi[i_strip];
     }
   }
   // If the next distrip did not have a hit, then we merely assign the
   // shifted time to the time associated with the staggered distrip.
   else {
     stag_time[i_strip+2] = stag_time[i_strip];
     stag_digi[i_strip+2] = stag_digi[i_strip];
   }
 
   // Then to prevent previous staggers from being overwritten, we assign
   // the unshifted time to -999, and then mark the triads that were shifted
   // so that we don't go into the routine ever again (such as when making
   // the next loop over strips).
   stag_time[i_strip]  = -999;
   stag_triad[i_strip] =    4;
   stag_digi[i_strip]  = -999;
 
   if (debug)
     LogDebug("CSCCathodeLCTProcessor")
       << " Exit  distripStagger: i_strip = " << i_strip
       << " stag_triad[i_strip] = "   << stag_triad[i_strip]
       << " stag_time[i_strip] = "    << stag_time[i_strip]
       << " stag_triad[i_strip+2] = " << stag_triad[i_strip+2]
       << " stag_time[i_strip+2] = "  << stag_time[i_strip+2];
 }

void CSCCathodeLCTProcessor::dumpConfigParams ( ) const

private

Dump CLCT configuration parameters.

Definition at line 2806 of file CSCCathodeLCTProcessor.cc.

References drift_delay, fifo_pretrig, fifo_tbins, hit_persist, isTMB07, LogDebug, min_separation, nplanes_hit_pattern, nplanes_hit_pretrig, and pid_thresh_pretrig.

Referenced by CSCCathodeLCTProcessor(), run(), and setConfigParameters().

                                                     {
   std::ostringstream strm;
   strm << "\n";
   strm << "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n";
   strm << "+                  CLCT configuration parameters:                  +\n";
   strm << "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n";
   strm << " fifo_tbins   [total number of time bins in DAQ readout] = "
        << fifo_tbins << "\n";
   strm << " fifo_pretrig [start time of cathode raw hits in DAQ readout] = "
        << fifo_pretrig << "\n";
   strm << " hit_persist  [duration of signal pulse, in 25 ns bins] = "
        << hit_persist << "\n";
   strm << " drift_delay  [time after pre-trigger before TMB latches LCTs] = "
        << drift_delay << "\n";
   strm << " nplanes_hit_pretrig [min. number of layers hit for pre-trigger] = "
        << nplanes_hit_pretrig << "\n";
   strm << " nplanes_hit_pattern [min. number of layers hit for trigger] = "
        << nplanes_hit_pattern << "\n";
   if (isTMB07) {
     strm << " pid_thresh_pretrig [lower threshold on pattern id] = "
      << pid_thresh_pretrig << "\n";
     strm << " min_separation     [region of busy key strips] = "
      << min_separation << "\n";
   }
   strm << "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n";
   LogDebug("CSCCathodeLCTProcessor") << strm.str();
   //std::cerr<<strm.str()<<std::endl;
 }

void CSCCathodeLCTProcessor::dumpDigis	(	const std::vector< int >	strip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		const int	stripType,
		const int	nStrips
	)		const

private

Dump digis on half-strips and di-strips.

Definition at line 2836 of file CSCCathodeLCTProcessor.cc.

References cfeb_strips, TauDecayModes::dec, relativeConstraints::empty, LogDebug, LogTrace, CSCConstants::NUM_LAYERS, digitizers_cfi::strip, theChamber, theEndcap, theRing, and theStation.

Referenced by findLCTs(), and findLCTsSLHC().

 {
   LogDebug("CSCCathodeLCTProcessor")
     << "ME" << ((theEndcap == 1) ? "+" : "-")
     << theStation << "/" << theRing << "/" << theChamber
     << " strip type " << stripType << " nStrips " << nStrips;
 
   std::ostringstream strstrm;
   for (int i_strip = 0; i_strip < nStrips; i_strip++) {
     if (i_strip%10 == 0) {
       if (i_strip < 100) strstrm << i_strip/10;
       else               strstrm << (i_strip-100)/10;
     }
     else                 strstrm << " ";
     if ((i_strip+1)%cfeb_strips[stripType] == 0) strstrm << " ";
   }
   strstrm << "\n";
   for (int i_strip = 0; i_strip < nStrips; i_strip++) {
     strstrm << i_strip%10;
     if ((i_strip+1)%cfeb_strips[stripType] == 0) strstrm << " ";
   }
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
     strstrm << "\n";
     for (int i_strip = 0; i_strip < nStrips; i_strip++) {
       if (!strip[i_layer][i_strip].empty()) {
     std::vector<int> bx_times = strip[i_layer][i_strip];
     // Dump only the first in time.
     strstrm << std::hex << bx_times[0] << std::dec;
       }
       else {
     strstrm << "-";
       }
       if ((i_strip+1)%cfeb_strips[stripType] == 0) strstrm << " ";
     }
   }
   LogTrace("CSCCathodeLCTProcessor") << strstrm.str();
 }

std::vector< CSCCLCTDigi > CSCCathodeLCTProcessor::findLCTs	(	const std::vector< int >	strip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		int	stripType
	)

private

Definition at line 1190 of file CSCCathodeLCTProcessor.cc.

References funct::abs(), CLCT_BEND, CLCT_BX, CLCT_CFEB, CLCT_NUM_QUANTITIES, CLCT_PATTERN, CLCT_QUALITY, CLCT_STRIP, CLCT_STRIP_TYPE, dumpDigis(), getKeyStripData(), infoV, LogTrace, CSCConstants::MAX_CLCTS_PER_PROCESSOR, nplanes_hit_pattern, CSCConstants::NUM_HALF_STRIPS_7CFEBS, CSCConstants::NUM_HALF_STRIPS_PER_CFEB, numStrips, preTrigger(), and digitizers_cfi::strip.

Referenced by run(), and testPatterns().

 {
   int j;
   int best_strip = 0;
   int first_bx = 999;
   const int adjacent_strips = 2;
   // Distrip, halfstrip pattern threshold.
   const unsigned int ptrn_thrsh[2] = {nplanes_hit_pattern, nplanes_hit_pattern};
   int highest_quality = 0;
 
   int keystrip_data[CSCConstants::NUM_HALF_STRIPS_7CFEBS][CLCT_NUM_QUANTITIES];
   int final_lcts[CSCConstants::MAX_CLCTS_PER_PROCESSOR];
 
   std::vector <CSCCLCTDigi> lctList;
 
   int nStrips = 0;
   if (stripType == 1)      nStrips = 2*numStrips + 1;
   else if (stripType == 0) nStrips = numStrips/2 + 1;
 
   if (infoV > 1) dumpDigis(strip, stripType, nStrips);
 
   // Send data to a pretrigger so that we don't excessively look at data
   // that won't give an LCT. If there is a pretrigger, then get all quality
   // and bend for all keystrips.
   if (preTrigger(strip, stripType, nStrips, first_bx)){
     getKeyStripData(strip, keystrip_data, nStrips, first_bx, best_strip, stripType);
 
     /* Set all final_lcts to impossible key_strip numbers */
     for (j = 0; j < CSCConstants::MAX_CLCTS_PER_PROCESSOR; j++)
       final_lcts[j] = -999;
 
     // Now take the keystrip with the best quality, and do a search over the
     // rest of the strips for the next highest quality.  Do the search over a
     // range excluding a certain number of keystrips adjacent to the original
     // best key_strip.
     final_lcts[0] = best_strip;
 
     for (int key_strip = 0; key_strip < (nStrips-stripType); key_strip++){
       // If indexed strip does not fall within excluded range, then continue
       if (abs(best_strip - key_strip) > adjacent_strips){
     // Match with highest quality
     if (keystrip_data[key_strip][CLCT_QUALITY] > highest_quality){
       highest_quality = keystrip_data[key_strip][CLCT_QUALITY];
       final_lcts[1] = key_strip;
     }
       }
     }
 
     for (j = 0; j < CSCConstants::MAX_CLCTS_PER_PROCESSOR; j++){
       // Only report LCTs if the number of layers hit is greater than or
       // equal to the (variable) valid pattern threshold ptrn_thrsh.
       int keystrip = final_lcts[j];
       if (keystrip >= 0 &&
       keystrip_data[keystrip][CLCT_QUALITY] >= static_cast<int>(ptrn_thrsh[stripType])) {
         // assign the stripType here. 1 = halfstrip, 0 = distrip.
         keystrip_data[keystrip][CLCT_STRIP_TYPE] = stripType;
     // Now make the LCT words for the 2 highest, and store them in a list
     int theHalfStrip = (keystrip_data[keystrip][CLCT_STRIP_TYPE] ?
                 keystrip_data[keystrip][CLCT_STRIP] :
                 4*keystrip_data[keystrip][CLCT_STRIP]);
     keystrip_data[keystrip][CLCT_CFEB] = theHalfStrip/CSCConstants::NUM_HALF_STRIPS_PER_CFEB;
     int halfstrip_in_cfeb =
       theHalfStrip - CSCConstants::NUM_HALF_STRIPS_PER_CFEB*keystrip_data[keystrip][CLCT_CFEB];
 
     CSCCLCTDigi thisLCT(1, keystrip_data[keystrip][CLCT_QUALITY],
                 keystrip_data[keystrip][CLCT_PATTERN],
                 keystrip_data[keystrip][CLCT_STRIP_TYPE],
                 keystrip_data[keystrip][CLCT_BEND],
                 halfstrip_in_cfeb,
                 keystrip_data[keystrip][CLCT_CFEB],
                 keystrip_data[keystrip][CLCT_BX]);
     if (infoV > 2) {
       char stripType =
         (keystrip_data[keystrip][CLCT_STRIP_TYPE] == 0) ? 'D' : 'H';
       char bend =
         (keystrip_data[keystrip][CLCT_BEND] == 0) ? 'L' : 'R';
       LogTrace("CSCCathodeLCTProcessor")
         << " Raw Find: "
         << "Key Strip: "  << std::setw(3)
         << keystrip_data[keystrip][CLCT_STRIP]
         << " Pattern: "   << std::setw(2)
         << keystrip_data[keystrip][CLCT_PATTERN]
         << " Bend: "      << std::setw(1) << bend
         << " Quality: "   << std::setw(1)
         << keystrip_data[keystrip][CLCT_QUALITY]
         << " stripType: " << std::setw(1) << stripType
         << " BX: "        << std::setw(1)
         << keystrip_data[keystrip][CLCT_BX];
     }
     lctList.push_back(thisLCT);
       }
     }
   }
 
   return lctList;
 } // findLCTs -- idealized version for MC studies.

std::vector< CSCCLCTDigi > CSCCathodeLCTProcessor::findLCTs	(	const std::vector< int >	halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		const std::vector< int >	distrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS]
	)

private

Definition at line 1484 of file CSCCathodeLCTProcessor.cc.

References CLCT_BEND, CLCT_BX, CLCT_CFEB, CLCT_NUM_QUANTITIES, CLCT_PATTERN, CLCT_QUALITY, CLCT_STRIP, CLCT_STRIP_TYPE, drift_delay, dumpDigis(), getKeyStripData(), infoV, latchLCTs(), LogTrace, CSCConstants::MAX_CFEBS, CSCConstants::MAX_CLCTS_PER_PROCESSOR, CSCConstants::NUM_DI_STRIPS, CSCConstants::NUM_HALF_STRIPS, CSCConstants::NUM_HALF_STRIPS_7CFEBS, CSCConstants::NUM_HALF_STRIPS_PER_CFEB, CSCConstants::NUM_LAYERS, numStrips, preTrigger(), and priorityEncode().

                                                                                            {
   std::vector <CSCCLCTDigi> lctList;
   int _bx[2] = {999, 999};
   int first_bx = 999;
 
   const int nhStrips = 2*numStrips + 1;
   const int ndStrips = numStrips/2 + 1;
 
   if (infoV > 1) {
     dumpDigis(halfstrip, 1, nhStrips);
     dumpDigis(distrip,   0, ndStrips);
   }
 
   // Test beam version of TMB pretrigger and LCT sorting
   int h_keyStrip[CSCConstants::MAX_CFEBS];       // one key per CFEB
   unsigned int h_nhits[CSCConstants::MAX_CFEBS]; // number of hits in envelope for each key
   int d_keyStrip[CSCConstants::MAX_CFEBS];       // one key per CFEB
   unsigned int d_nhits[CSCConstants::MAX_CFEBS]; // number of hits in envelope for each key
   int keystrip_data[CSCConstants::MAX_CLCTS_PER_PROCESSOR][CLCT_NUM_QUANTITIES];    // 2 possible LCTs per CSC x 7 LCT quantities
   unsigned int h_pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS]; // simulate digital one-shot
   unsigned int d_pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS]; // simulate digital one-shot
   bool pre_trig[2] = {false, false};
 
   // All half-strip and di-strip pattern envelopes are evaluated
   // simultaneously, on every clock cycle.
   pre_trig[0] = preTrigger(halfstrip, h_pulse, 1, nhStrips, 0, _bx[0]);
   pre_trig[1] = preTrigger(  distrip, d_pulse, 0, ndStrips, 0, _bx[1]);
 
   // If any of 200 half-strip and di-strip envelopes has enough layers hit in
   // it, TMB will pre-trigger.
   if (pre_trig[0] || pre_trig[1]) {
     first_bx = (_bx[0] < _bx[1]) ? _bx[0] : _bx[1];
     if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
       << "half bx " << _bx[0] << " di bx " << _bx[1] << " first " << first_bx
       << "\n ..... waiting drift delay ..... ";
 
     // Empirically-found trick allowing to dramatically improve agreement
     // with MTCC-II data.
     // The trick is to ignore hits in a few first time bins when latching
     // hits for priority encode envelopes.  For MTCC-II, we need to ignore
     // hits in time bins 0-3 inclusively.
     //
     // Firmware configuration has been fixed for most of 2007 runs, so
     // this trick should NOT be used when emulating 2007 trigger.
     /*
     int max_bx = 4;
     for (int ilayer = 0; ilayer < CSCConstants::NUM_LAYERS; ilayer++) {
       for (int istrip = 0; istrip < CSCConstants::NUM_HALF_STRIPS; istrip++) {
     for (int bx = 0; bx < max_bx; bx++) {
       if (((h_pulse[ilayer][istrip] >> bx) & 1) == 1) {
         h_pulse[ilayer][istrip] = 0;
       }
     }
       }
       for (int istrip = 0; istrip < CSCConstants::NUM_DI_STRIPS; istrip++) {
     for (int bx = 0; bx < max_bx; bx++) {
       if (((d_pulse[ilayer][istrip] >> bx) & 1) == 1) {
         d_pulse[ilayer][istrip] = 0;
       }
     }
       }
     }
     */
 
     // TMB latches LCTs drift_delay clocks after pretrigger.
     int latch_bx = first_bx + drift_delay;
     latchLCTs(h_pulse, h_keyStrip, h_nhits, 1, CSCConstants::NUM_HALF_STRIPS,
           latch_bx);
     latchLCTs(d_pulse, d_keyStrip, d_nhits, 0,   CSCConstants::NUM_DI_STRIPS,
           latch_bx);
 
     if (infoV > 1) {
       LogTrace("CSCCathodeLCTProcessor")
     << "...............................\n"
     << "Final halfstrip hits and keys (after drift delay) ...";
       for (int icfeb = 0; icfeb < CSCConstants::MAX_CFEBS; icfeb++) {
     LogTrace("CSCCathodeLCTProcessor")
       << "cfeb " << icfeb << " key: " << h_keyStrip[icfeb]
       << " hits " << h_nhits[icfeb];
       }
       LogTrace("CSCCathodeLCTProcessor")
     << "Final distrip hits and keys (after drift delay) ...";
       for (int icfeb = 0; icfeb < CSCConstants::MAX_CFEBS; icfeb++) {
     LogTrace("CSCCathodeLCTProcessor")
       << "cfeb " << icfeb << " key: " << d_keyStrip[icfeb]
       << " hits " << d_nhits[icfeb];
       }
     }
     priorityEncode(h_keyStrip, h_nhits, d_keyStrip, d_nhits, keystrip_data);
     getKeyStripData(h_pulse, d_pulse, keystrip_data, first_bx);
 
     for (int ilct = 0; ilct < 2; ilct++) {
       if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
     << "found lcts: ilct " << ilct
     << "  key strip " << keystrip_data[ilct][CLCT_STRIP];
       if (keystrip_data[ilct][CLCT_STRIP] != -1) {
     int halfstrip_in_cfeb = 0;
     if (keystrip_data[ilct][CLCT_STRIP_TYPE] == 0)
       halfstrip_in_cfeb = 4*keystrip_data[ilct][CLCT_STRIP] -
                              CSCConstants::NUM_HALF_STRIPS_PER_CFEB*keystrip_data[ilct][CLCT_CFEB];
     else
       halfstrip_in_cfeb = keystrip_data[ilct][CLCT_STRIP] -
                          CSCConstants::NUM_HALF_STRIPS_PER_CFEB*keystrip_data[ilct][CLCT_CFEB];
 
     CSCCLCTDigi thisLCT(1, keystrip_data[ilct][CLCT_QUALITY],
                 keystrip_data[ilct][CLCT_PATTERN],
                 keystrip_data[ilct][CLCT_STRIP_TYPE],
                 keystrip_data[ilct][CLCT_BEND],
                 halfstrip_in_cfeb,
                 keystrip_data[ilct][CLCT_CFEB],
                 keystrip_data[ilct][CLCT_BX]);
     lctList.push_back(thisLCT);
       }
     }
   }
 
   return lctList;
 
 } // findLCTs -- pre-2007 version.

std::vector< CSCCLCTDigi > CSCCathodeLCTProcessor::findLCTs ( const std::vector< int > halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS] )

private

Definition at line 2093 of file CSCCathodeLCTProcessor.cc.

References best_pid, cfeb_strips, CLCT_BEND, CLCT_BX, CLCT_CFEB, CLCT_NUM_QUANTITIES, CLCT_PATTERN, CLCT_QUALITY, CLCT_STRIP, CLCT_STRIP_TYPE, drift_delay, dumpDigis(), fifo_tbins, infoV, CSCConstants::KEY_CLCT_LAYER, LogTrace, markBusyKeys(), CSCConstants::MAX_CLCTS_PER_PROCESSOR, CSCConstants::MAX_HALFSTRIPS_IN_PATTERN, nhits, nplanes_hit_pattern, CSCConstants::NUM_HALF_STRIPS_7CFEBS, CSCConstants::NUM_LAYERS, numStrips, pattern2007, preTrigger(), ptnFinding(), pulse(), pulseExtension(), jets_cff::quality, stagger, start_bx_shift, and thePreTriggerBXs.

                                                                                                                                                   {
   std::vector<CSCCLCTDigi> lctList;
 
   // Max. number of half-strips for this chamber.
   const int maxHalfStrips = 2*numStrips + 1;
 
   if (infoV > 1) dumpDigis(halfstrip, 1, maxHalfStrips);
 
   // 2 possible LCTs per CSC x 7 LCT quantities
   int keystrip_data[CSCConstants::MAX_CLCTS_PER_PROCESSOR][CLCT_NUM_QUANTITIES] = {{0}};
   unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS];
 
   // Fire half-strip one-shots for hit_persist bx's (4 bx's by default).
   pulseExtension(halfstrip, maxHalfStrips, pulse);
 
   unsigned int start_bx = start_bx_shift;
   // Stop drift_delay bx's short of fifo_tbins since at later bx's we will
   // not have a full set of hits to start pattern search anyway.
   unsigned int stop_bx  = fifo_tbins - drift_delay;
   // Allow for more than one pass over the hits in the time window.
   while (start_bx < stop_bx) {
     // All half-strip pattern envelopes are evaluated simultaneously, on every
     // clock cycle.
     int first_bx = 999;
     bool pre_trig = preTrigger(pulse, start_bx, first_bx);
 
     // If any of half-strip envelopes has enough layers hit in it, TMB
     // will pre-trigger.
     if (pre_trig) {
       thePreTriggerBXs.push_back(first_bx);
       if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
     << "..... pretrigger at bx = " << first_bx
     << "; waiting drift delay .....";
 
       // TMB latches LCTs drift_delay clocks after pretrigger.
       int latch_bx = first_bx + drift_delay;
       bool hits_in_time = ptnFinding(pulse, maxHalfStrips, latch_bx);
       if (infoV > 1) {
     if (hits_in_time) {
       for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER-1];
            hstrip < maxHalfStrips; hstrip++) {
         if (nhits[hstrip] > 0) {
           LogTrace("CSCCathodeLCTProcessor")
         << " bx = " << std::setw(2) << latch_bx << " --->"
         << " halfstrip = " << std::setw(3) << hstrip
         << " best pid = "  << std::setw(2) << best_pid[hstrip]
         << " nhits = "     << nhits[hstrip];
         }
       }
     }
       }
       // The pattern finder runs continuously, so another pre-trigger
       // could occur already at the next bx.
       start_bx = first_bx + 1;
 
       // Quality for sorting.
       int quality[CSCConstants::NUM_HALF_STRIPS_7CFEBS];
       int best_halfstrip[CSCConstants::MAX_CLCTS_PER_PROCESSOR], best_quality[CSCConstants::MAX_CLCTS_PER_PROCESSOR];
       for (int ilct = 0; ilct < CSCConstants::MAX_CLCTS_PER_PROCESSOR; ilct++) {
     best_halfstrip[ilct] = -1;
     best_quality[ilct]   =  0;
       }
 
       // Calculate quality from pattern id and number of hits, and
       // simultaneously select best-quality LCT.
       if (hits_in_time) {
     for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER-1];
          hstrip < maxHalfStrips; hstrip++) {
       // The bend-direction bit pid[0] is ignored (left and right
       // bends have equal quality).
       quality[hstrip] = (best_pid[hstrip] & 14) | (nhits[hstrip] << 5);
       if (quality[hstrip] > best_quality[0]) {
         best_halfstrip[0] = hstrip;
         best_quality[0]   = quality[hstrip];
       }
       if (infoV > 1 && quality[hstrip] > 0) {
         LogTrace("CSCCathodeLCTProcessor")
           << " 1st CLCT: halfstrip = " << std::setw(3) << hstrip
           << " quality = "             << std::setw(3) << quality[hstrip]
         << " nhits = " << std::setw(3) << nhits[hstrip]
         << " pid = " << std::setw(3) << best_pid[hstrip]
           << " best halfstrip = " << std::setw(3) << best_halfstrip[0]
           << " best quality = "   << std::setw(3) << best_quality[0];
       }
     }
       }
 
       // If 1st best CLCT is found, look for the 2nd best.
       if (best_halfstrip[0] >= 0) {
     // Mark keys near best CLCT as busy by setting their quality to
     // zero, and repeat the search.
     markBusyKeys(best_halfstrip[0], best_pid[best_halfstrip[0]], quality);
 
         for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER-1];
        hstrip < maxHalfStrips; hstrip++) {
       if (quality[hstrip] > best_quality[1]) {
         best_halfstrip[1] = hstrip;
         best_quality[1]   = quality[hstrip];
       }
       if (infoV > 1 && quality[hstrip] > 0) {
         LogTrace("CSCCathodeLCTProcessor")
           << " 2nd CLCT: halfstrip = " << std::setw(3) << hstrip
           << " quality = "             << std::setw(3) << quality[hstrip]
         << " nhits = " << std::setw(3) << nhits[hstrip]
         << " pid = " << std::setw(3) << best_pid[hstrip]
           << " best halfstrip = " << std::setw(3) << best_halfstrip[1]
           << " best quality = "   << std::setw(3) << best_quality[1];
       }
     }
 
     // Pattern finder.
     bool ptn_trig = false;
     for (int ilct = 0; ilct < CSCConstants::MAX_CLCTS_PER_PROCESSOR; ilct++) {
       int best_hs = best_halfstrip[ilct];
       if (best_hs >= 0 && nhits[best_hs] >= nplanes_hit_pattern) {
         ptn_trig = true;
         keystrip_data[ilct][CLCT_PATTERN]    = best_pid[best_hs];
         keystrip_data[ilct][CLCT_BEND]       =
           pattern2007[best_pid[best_hs]][CSCConstants::MAX_HALFSTRIPS_IN_PATTERN];
         // Remove stagger if any.
         keystrip_data[ilct][CLCT_STRIP]      =
           best_hs - stagger[CSCConstants::KEY_CLCT_LAYER-1];
         keystrip_data[ilct][CLCT_BX]         = first_bx;
         keystrip_data[ilct][CLCT_STRIP_TYPE] = 1;           // obsolete
         keystrip_data[ilct][CLCT_QUALITY]    = nhits[best_hs];
         keystrip_data[ilct][CLCT_CFEB]       =
           keystrip_data[ilct][CLCT_STRIP]/cfeb_strips[1];
         int halfstrip_in_cfeb = keystrip_data[ilct][CLCT_STRIP] -
           cfeb_strips[1]*keystrip_data[ilct][CLCT_CFEB];
 
         if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
           << " Final selection: ilct " << ilct
           << " key halfstrip " << keystrip_data[ilct][CLCT_STRIP]
           << " quality "       << keystrip_data[ilct][CLCT_QUALITY]
           << " pattern "       << keystrip_data[ilct][CLCT_PATTERN]
           << " bx "            << keystrip_data[ilct][CLCT_BX];
 
         CSCCLCTDigi thisLCT(1, keystrip_data[ilct][CLCT_QUALITY],
                 keystrip_data[ilct][CLCT_PATTERN],
                 keystrip_data[ilct][CLCT_STRIP_TYPE],
                 keystrip_data[ilct][CLCT_BEND],
                 halfstrip_in_cfeb,
                 keystrip_data[ilct][CLCT_CFEB],
                 keystrip_data[ilct][CLCT_BX]);
         lctList.push_back(thisLCT);
       }
     }
 
     if (ptn_trig) {
       // Once there was a trigger, CLCT pre-trigger state machine
       // checks the number of hits that lie on a pattern template
       // at every bx, and waits for it to drop below threshold.
       // The search for CLCTs resumes only when the number of hits
       // drops below threshold.
       start_bx = fifo_tbins;
       // Stop checking drift_delay bx's short of fifo_tbins since
       // at later bx's we won't have a full set of hits for a
       // pattern search anyway.
       unsigned int stop_time = fifo_tbins - drift_delay;
       for (unsigned int bx = latch_bx + 1; bx < stop_time; bx++) {
         bool return_to_idle = true;
         bool hits_in_time = ptnFinding(pulse, maxHalfStrips, bx);
         if (hits_in_time) {
           for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER-1];
            hstrip < maxHalfStrips; hstrip++) {
         if (nhits[hstrip] >= nplanes_hit_pattern) {
           if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
             << " State machine busy at bx = " << bx;
           return_to_idle = false;
           break;
         }
           }
         }
         if (return_to_idle) {
           if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
         << " State machine returns to idle state at bx = " << bx;
           start_bx = bx;
           break;
         }
       }
     }
       }
     }
     else {
       start_bx = first_bx + 1; // no dead time
     }
   }
 
   return lctList;
 } // findLCTs -- TMB-07 version.

std::vector< CSCCLCTDigi > CSCCathodeLCTProcessor::findLCTsSLHC ( const std::vector< int > halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS] )

private

Definition at line 2544 of file CSCCathodeLCTProcessor.cc.

References best_pid, cfeb_strips, CLCT_BEND, CLCT_BX, CLCT_CFEB, CLCT_NUM_QUANTITIES, CLCT_PATTERN, CLCT_QUALITY, clct_state_machine_zone, CLCT_STRIP, CLCT_STRIP_TYPE, drift_delay, dumpDigis(), dynamic_state_machine_zone, fifo_tbins, first_bx_corrected, mps_fire::i, infoV, ispretrig, CSCConstants::KEY_CLCT_LAYER, LogTrace, markBusyKeys(), CSCConstants::MAX_CLCT_TBINS, CSCConstants::MAX_CLCTS_PER_PROCESSOR, CSCConstants::MAX_HALFSTRIPS_IN_PATTERN, nhits, nplanes_hit_pattern, CSCConstants::NUM_HALF_STRIPS_7CFEBS, CSCConstants::NUM_LAYERS, numStrips, pattern2007, pretrig_trig_zone, preTrigger(), ptnFinding(), pulse(), pulseExtension(), jets_cff::quality, CSCCLCTDigi::setFullBX(), stagger, start_bx_shift, and use_corrected_bx.

Referenced by run().

 {
   std::vector<CSCCLCTDigi> lctList;
 
   // Max. number of half-strips for this chamber.
   const int maxHalfStrips = 2 * numStrips + 1;
 
   if (infoV > 1) dumpDigis(halfstrip, 1, maxHalfStrips);
 
   // keeps dead-time zones around key halfstrips of triggered CLCTs
   bool busyMap[CSCConstants::NUM_HALF_STRIPS_7CFEBS][CSCConstants::MAX_CLCT_TBINS];
   for (int i = 0; i < CSCConstants::NUM_HALF_STRIPS_7CFEBS; i++)
     for (int j = 0; j < CSCConstants::MAX_CLCT_TBINS; j++)
       busyMap[i][j] = false;
 
   std::vector<CSCCLCTDigi> lctListBX;
 
   unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS];
 
   // Fire half-strip one-shots for hit_persist bx's (4 bx's by default).
   pulseExtension(halfstrip, maxHalfStrips, pulse);
 
   unsigned int start_bx = start_bx_shift;
   // Stop drift_delay bx's short of fifo_tbins since at later bx's we will
   // not have a full set of hits to start pattern search anyway.
   unsigned int stop_bx = fifo_tbins - drift_delay;
 
   // Allow for more than one pass over the hits in the time window.
   // Do search in every BX
   while (start_bx < stop_bx)
   {
     lctListBX.clear();
 
     // All half-strip pattern envelopes are evaluated simultaneously, on every clock cycle.
     int first_bx = 999;
     bool pre_trig = preTrigger(pulse, start_bx, first_bx);
 
     // If any of half-strip envelopes has enough layers hit in it, TMB
     // will pre-trigger.
     if (pre_trig)
     {
       if (infoV > 1)
         LogTrace("CSCCathodeLCTProcessor") << "..... pretrigger at bx = " << first_bx << "; waiting drift delay .....";
 
       // TMB latches LCTs drift_delay clocks after pretrigger.
       int latch_bx = first_bx + drift_delay;
       bool hits_in_time = ptnFinding(pulse, maxHalfStrips, latch_bx);
       if (infoV > 1)
       {
         if (hits_in_time)
         {
           for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER - 1]; hstrip < maxHalfStrips; hstrip++)
           {
             if (nhits[hstrip] > 0)
             {
               LogTrace("CSCCathodeLCTProcessor") << " bx = " << std::setw(2) << latch_bx << " --->" << " halfstrip = "
                   << std::setw(3) << hstrip << " best pid = " << std::setw(2) << best_pid[hstrip] << " nhits = " << nhits[hstrip];
             }
           }
         }
       }
       // The pattern finder runs continuously, so another pre-trigger
       // could occur already at the next bx.
       start_bx = first_bx + 1;
 
       // 2 possible LCTs per CSC x 7 LCT quantities per BX
       int keystrip_data[CSCConstants::MAX_CLCTS_PER_PROCESSOR][CLCT_NUM_QUANTITIES] = {{0}};
 
       // Quality for sorting.
       int quality[CSCConstants::NUM_HALF_STRIPS_7CFEBS];
       int best_halfstrip[CSCConstants::MAX_CLCTS_PER_PROCESSOR], best_quality[CSCConstants::MAX_CLCTS_PER_PROCESSOR];
       for (int ilct = 0; ilct < CSCConstants::MAX_CLCTS_PER_PROCESSOR; ilct++)
       {
         best_halfstrip[ilct] = -1;
         best_quality[ilct] = 0;
       }
 
       bool pretrig_zone[CSCConstants::NUM_HALF_STRIPS_7CFEBS];
 
       // Calculate quality from pattern id and number of hits, and
       // simultaneously select best-quality LCT.
       if (hits_in_time)
       {
         // first, mark half-strip zones around pretriggers
         // that happened at the current first_bx
         for (int hstrip = 0; hstrip < CSCConstants::NUM_HALF_STRIPS_7CFEBS; hstrip++)
           pretrig_zone[hstrip] = false;
         for (int hstrip = 0; hstrip < CSCConstants::NUM_HALF_STRIPS_7CFEBS; hstrip++)
         {
           if (ispretrig[hstrip])
           {
             int min_hs = hstrip - pretrig_trig_zone;
             int max_hs = hstrip + pretrig_trig_zone;
             if (min_hs < 0)
               min_hs = 0;
             if (max_hs > CSCConstants::NUM_HALF_STRIPS_7CFEBS - 1)
               max_hs = CSCConstants::NUM_HALF_STRIPS_7CFEBS - 1;
             for (int hs = min_hs; hs <= max_hs; hs++)
               pretrig_zone[hs] = true;
             if (infoV > 1)
               LogTrace("CSCCathodeLCTProcessor") << " marked pretrigger halfstrip zone [" << min_hs << "," << max_hs << "]";
           }
         }
 
         for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER - 1]; hstrip < maxHalfStrips; hstrip++)
         {
           // The bend-direction bit pid[0] is ignored (left and right bends have equal quality).
           quality[hstrip] = (best_pid[hstrip] & 14) | (nhits[hstrip] << 5);
           // do not consider halfstrips:
           //   - out of pretrigger-trigger zones
           //   - in busy zones from previous trigger
           if (quality[hstrip] > best_quality[0] &&
               pretrig_zone[hstrip] &&
               !busyMap[hstrip][first_bx] )
           {
             best_halfstrip[0] = hstrip;
             best_quality[0] = quality[hstrip];
             if (infoV > 1)
             {
               LogTrace("CSCCathodeLCTProcessor") << " 1st CLCT: halfstrip = " << std::setw(3) << hstrip << " quality = "
                   << std::setw(3) << quality[hstrip] << " best halfstrip = " << std::setw(3) << best_halfstrip[0]
                   << " best quality = " << std::setw(3) << best_quality[0];
             }
           }
         }
       }
 
       // If 1st best CLCT is found, look for the 2nd best.
       if (best_halfstrip[0] >= 0)
       {
         // Mark keys near best CLCT as busy by setting their quality to zero, and repeat the search.
         markBusyKeys(best_halfstrip[0], best_pid[best_halfstrip[0]], quality);
 
         for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER - 1]; hstrip < maxHalfStrips; hstrip++)
         {
           if (quality[hstrip] > best_quality[1] &&
               pretrig_zone[hstrip] &&
               !busyMap[hstrip][first_bx] )
           {
             best_halfstrip[1] = hstrip;
             best_quality[1] = quality[hstrip];
             if (infoV > 1)
             {
               LogTrace("CSCCathodeLCTProcessor") << " 2nd CLCT: halfstrip = " << std::setw(3) << hstrip << " quality = "
                   << std::setw(3) << quality[hstrip] << " best halfstrip = " << std::setw(3) << best_halfstrip[1]
                   << " best quality = " << std::setw(3) << best_quality[1];
             }
           }
         }
 
         // Pattern finder.
         bool ptn_trig = false;
         for (int ilct = 0; ilct < CSCConstants::MAX_CLCTS_PER_PROCESSOR; ilct++)
         {
           int best_hs = best_halfstrip[ilct];
           if (best_hs >= 0 && nhits[best_hs] >= nplanes_hit_pattern)
           {
             int bx  = first_bx;
             int fbx = first_bx_corrected[best_hs];
             if (use_corrected_bx) {
               bx  = fbx;
               fbx = first_bx;
             }
             ptn_trig = true;
             keystrip_data[ilct][CLCT_PATTERN] = best_pid[best_hs];
             keystrip_data[ilct][CLCT_BEND] = pattern2007[best_pid[best_hs]][CSCConstants::MAX_HALFSTRIPS_IN_PATTERN];
             // Remove stagger if any.
             keystrip_data[ilct][CLCT_STRIP] = best_hs - stagger[CSCConstants::KEY_CLCT_LAYER - 1];
             keystrip_data[ilct][CLCT_BX] = bx;
             keystrip_data[ilct][CLCT_STRIP_TYPE] = 1; // obsolete
             keystrip_data[ilct][CLCT_QUALITY] = nhits[best_hs];
             keystrip_data[ilct][CLCT_CFEB] = keystrip_data[ilct][CLCT_STRIP] / cfeb_strips[1];
             int halfstrip_in_cfeb = keystrip_data[ilct][CLCT_STRIP] - cfeb_strips[1] * keystrip_data[ilct][CLCT_CFEB];
 
             if (infoV > 1)
               LogTrace("CSCCathodeLCTProcessor") << " Final selection: ilct " << ilct << " key halfstrip "
                   << keystrip_data[ilct][CLCT_STRIP] << " quality " << keystrip_data[ilct][CLCT_QUALITY] << " pattern "
                   << keystrip_data[ilct][CLCT_PATTERN] << " bx " << keystrip_data[ilct][CLCT_BX];
 
             CSCCLCTDigi thisLCT(1, keystrip_data[ilct][CLCT_QUALITY], keystrip_data[ilct][CLCT_PATTERN],
                 keystrip_data[ilct][CLCT_STRIP_TYPE], keystrip_data[ilct][CLCT_BEND], halfstrip_in_cfeb,
                 keystrip_data[ilct][CLCT_CFEB], keystrip_data[ilct][CLCT_BX]);
             thisLCT.setFullBX(fbx);
             lctList.push_back(thisLCT);
             lctListBX.push_back(thisLCT);
           }
         }
 
         // state-machine
         if (ptn_trig)
         {
           // Once there was a trigger, CLCT pre-trigger state machine checks the number of hits
           // that lie on a key halfstrip pattern template at every bx, and waits for it to drop below threshold.
           // During that time no CLCTs could be found with its key halfstrip in the area of
           // [clct_key-clct_state_machine_zone, clct_key+clct_state_machine_zone]
           // starting from first_bx+1.
           // The search for CLCTs resumes only when the number of hits on key halfstrip drops below threshold.
           for (unsigned int ilct = 0; ilct < lctListBX.size(); ilct++)
           {
             int key_hstrip = lctListBX[ilct].getKeyStrip() + stagger[CSCConstants::KEY_CLCT_LAYER - 1];
 
             int delta_hs = clct_state_machine_zone;
             if (dynamic_state_machine_zone)
               delta_hs = pattern2007[lctListBX[ilct].getPattern()][CSCConstants::MAX_HALFSTRIPS_IN_PATTERN + 1] - 1;
 
             int min_hstrip = key_hstrip - delta_hs;
             int max_hstrip = key_hstrip + delta_hs;
 
             if (min_hstrip < stagger[CSCConstants::KEY_CLCT_LAYER - 1])
               min_hstrip = stagger[CSCConstants::KEY_CLCT_LAYER - 1];
             if (max_hstrip > maxHalfStrips)
               max_hstrip = maxHalfStrips;
 
             if (infoV > 2)
               LogTrace("CSCCathodeLCTProcessor") << " marking post-trigger zone after bx=" << lctListBX[ilct].getBX() << " ["
                   << min_hstrip << "," << max_hstrip << "]";
 
             // Stop checking drift_delay bx's short of fifo_tbins since
             // at later bx's we won't have a full set of hits for a
             // pattern search anyway.
             //int stop_time = fifo_tbins - drift_delay;
             // -- no, need to extend busyMap over fifo_tbins - drift_delay
             for (size_t bx = first_bx + 1; bx < fifo_tbins; bx++)
             {
               bool busy_bx = false;
               if (bx <= (size_t)latch_bx)
                 busy_bx = true; // always busy before drift time
               if (!busy_bx)
               {
                 bool hits_in_time = ptnFinding(pulse, maxHalfStrips, bx);
                 if (hits_in_time && nhits[key_hstrip] >= nplanes_hit_pattern)
                   busy_bx = true;
                 if (infoV > 2)
                   LogTrace("CSCCathodeLCTProcessor") << "  at bx=" << bx << " hits_in_time=" << hits_in_time << " nhits="
                       << nhits[key_hstrip];
               }
               if (infoV > 2)
                 LogTrace("CSCCathodeLCTProcessor") << "  at bx=" << bx << " busy=" << busy_bx;
               if (busy_bx)
                 for (int hstrip = min_hstrip; hstrip <= max_hstrip; hstrip++)
                   busyMap[hstrip][bx] = true;
               else
                 break;
             }
           }
         } // if (ptn_trig)
       }
     }
     else
     {
       start_bx = first_bx + 1; // no dead time
     }
   }
 
   return lctList;
 } // findLCTs -- SLHC version.

int CSCCathodeLCTProcessor::findNumLayersHit ( std::vector< int > stripsHit[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS] )

private

Definition at line 3199 of file CSCCathodeLCTProcessor.cc.

References relativeConstraints::empty, and CSCConstants::NUM_LAYERS.

Referenced by testPatterns().

                                                                                  {
   int number = 0;
   for (int layer = 0; layer < CSCConstants::NUM_LAYERS; layer++) {
     if ((!stripsHit[layer][ 9].empty()) ||
         (!stripsHit[layer][10].empty()) ||
     (!stripsHit[layer][11].empty()) ) number++;
   }
   return number;
 }

std::vector< CSCCLCTDigi > CSCCathodeLCTProcessor::getCLCTs ( )

Returns vector of all found CLCTs, if any.

Definition at line 2954 of file CSCCathodeLCTProcessor.cc.

References bestCLCT, CSCConstants::MAX_CLCT_TBINS, and secondCLCT.

Referenced by readoutCLCTs(), and run().

                                                         {
   std::vector<CSCCLCTDigi> tmpV;
   for (int bx = 0; bx < CSCConstants::MAX_CLCT_TBINS; bx++) {
     if (bestCLCT[bx].isValid())   tmpV.push_back(bestCLCT[bx]);
     if (secondCLCT[bx].isValid()) tmpV.push_back(secondCLCT[bx]);
   }
   return tmpV;
 }

bool CSCCathodeLCTProcessor::getDigis ( const CSCComparatorDigiCollection * compdc )

Access routines to comparator digis.

Definition at line 783 of file CSCCathodeLCTProcessor.cc.

References digiV, disableME1a, relativeConstraints::empty, infoV, LogTrace, CSCConstants::NUM_LAYERS, smartME1aME1b, theChamber, theEndcap, theRing, theSector, theStation, theSubsector, and theTrigChamber.

Referenced by run(), and setCSCGeometry().

                                                                                {
   bool noDigis = true;
 
   // Loop over layers and save comparator digis on each one into digiV[layer].
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
     digiV[i_layer].clear();
 
     CSCDetId detid(theEndcap, theStation, theRing, theChamber, i_layer+1);
     getDigis(compdc, detid);
 
     // If this is ME1/1, fetch digis in corresponding ME1/A (ring=4) as well.
     if (theStation == 1 && theRing == 1 && !disableME1a && !smartME1aME1b) {
       CSCDetId detid_me1a(theEndcap, theStation, 4, theChamber, i_layer+1);
       getDigis(compdc, detid_me1a);
     }
 
     // If this is ME1/1, fetch digis in corresponding ME1/B (ring=1) as well.
     // needed only for the "smart" A/B case; and, actually, only for data
     if (theStation == 1 && theRing == 4 && !disableME1a && smartME1aME1b
     && digiV[i_layer].empty()) {
       CSCDetId detid_me1b(theEndcap, theStation, 1, theChamber, i_layer+1);
       getDigis(compdc, detid_me1b);
     }
 
     if (!digiV[i_layer].empty()) {
       noDigis = false;
       if (infoV > 1) {
     LogTrace("CSCCathodeLCTProcessor")
       << "found " << digiV[i_layer].size()
       << " comparator digi(s) in layer " << i_layer << " of ME"
       << ((theEndcap == 1) ? "+" : "-") << theStation << "/" << theRing
       << "/" << theChamber << " (trig. sector " << theSector
       << " subsector " << theSubsector << " id " << theTrigChamber << ")";
       }
     }
   }
 
   return noDigis;
 }

void CSCCathodeLCTProcessor::getDigis	(	const CSCComparatorDigiCollection *	compdc,
		const CSCDetId &	id
	)

Definition at line 823 of file CSCCathodeLCTProcessor.cc.

References digiV, disableME1a, gangedME1a, relativeConstraints::ring, smartME1aME1b, theRing, and theStation.

                                           {
   bool me1bProc = theStation == 1 && theRing == 1;
   bool me1aProc = theStation == 1 && theRing == 4;
   bool me1b = (id.station() == 1) && (id.ring() == 1);
   bool me1a = (id.station() == 1) && (id.ring() == 4);
   const CSCComparatorDigiCollection::Range rcompd = compdc->get(id);
   for (CSCComparatorDigiCollection::const_iterator digiIt = rcompd.first;
        digiIt != rcompd.second; ++digiIt) {
     unsigned int origStrip = digiIt->getStrip();
     unsigned int maxStripsME1a = gangedME1a ? 16 : 48;
     if (me1a && origStrip <= maxStripsME1a && !disableME1a && !smartME1aME1b) {
       // Move ME1/A comparators from CFEB=0 to CFEB=4 if this has not
       // been done already.
       CSCComparatorDigi digi_corr(origStrip+64,
                   digiIt->getComparator(),
                   digiIt->getTimeBinWord());
       digiV[id.layer()-1].push_back(digi_corr);
     }
     else if (smartME1aME1b && (me1bProc || me1aProc)){
       //stay within bounds; in data all comps are in ME11B DetId
 
       if (me1aProc && me1b && origStrip > 64){//this is data
     //shift back to start from 1
     CSCComparatorDigi digi_corr(origStrip-64,
                     digiIt->getComparator(),
                     digiIt->getTimeBinWord());
     digiV[id.layer()-1].push_back(digi_corr);
       } else if ((me1bProc && me1b && origStrip <= 64)
          || ((me1aProc && me1a))//this is MC for ME11a
          ){
     digiV[id.layer()-1].push_back(*digiIt);
       }
     }
     else {
       digiV[id.layer()-1].push_back(*digiIt);
     }
   }
 }

void CSCCathodeLCTProcessor::getKeyStripData	(	const std::vector< int >	strip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		int	keystrip_data[CSCConstants::NUM_HALF_STRIPS_7CFEBS][7],
		int	nStrips,
		int	first_bx,
		int &	best_strip,
		int	stripType
	)

private

Referenced by findLCTs(), preTrigger(), and priorityEncode().

void CSCCathodeLCTProcessor::getKeyStripData	(	const unsigned int	h_pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		const unsigned int	d_pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		int	keystrip_data[2][7],
		const int	first_bx
	)

private

void CSCCathodeLCTProcessor::getPattern	(	int	pattern_num,
		int	strip_value[CSCConstants::MAX_STRIPS_IN_PATTERN],
		int	bx_time,
		int &	quality,
		int &	bend
	)

private

Definition at line 1428 of file CSCCathodeLCTProcessor.cc.

References hitIsGood(), CSCConstants::MAX_STRIPS_IN_PATTERN, CSCConstants::NUM_LAYERS, and pattern.

Referenced by preTrigger(), priorityEncode(), and testPatterns().

                                {
   // This function takes strip values and bx_time to find out which hits fall
   // within a certain pattern.  Quality, and bend are then calculated based on
   // which strip pattern and how many layers were hit within the pattern.
   int layers_hit = 0;
   bool hit_layer[CSCConstants::NUM_LAYERS];
 
   // Clear hit_layer array to keep track of number of layers hit.
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++)
     hit_layer[i_layer] = false;
 
   // Loop over all designated patterns.
   for (int strip_num = 0; strip_num < CSCConstants::MAX_STRIPS_IN_PATTERN; strip_num++){
     if (hitIsGood(strip_value[strip_num], bx_time)){
       for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++){
     // Loop over layer and see if corresponding strip is on same layer
     // If so then increment number of hits.
     if (i_layer == pattern[pattern_num][strip_num]){
       // If layer has no hits, then increment number of layers hit.
       if (hit_layer[i_layer] == false){
         layers_hit++;
         hit_layer[i_layer] = true;
       }
     }
       }
     }
   }
   // Get bend value from pattern.
   bend = pattern[pattern_num][CSCConstants::MAX_STRIPS_IN_PATTERN];
   quality = layers_hit;
 } // getPattern -- idealized version for MC studies.

void CSCCathodeLCTProcessor::getPattern	(	unsigned int	pattern_num,
		const int	strip_value[CSCConstants::MAX_STRIPS_IN_PATTERN],
		unsigned int &	quality,
		unsigned int &	bend
	)

private

Definition at line 2047 of file CSCCathodeLCTProcessor.cc.

References CSCConstants::MAX_STRIPS_IN_PATTERN, CSCConstants::NUM_LAYERS, and pattern.

                                                         {
 
   // This function takes strip "one-shots" at the correct bx to find out
   // which hits fall within a certain pattern.  Quality and bend are then
   // calculated based on which strip pattern and how many layers were hit
   // within the pattern.
 
   unsigned int layers_hit = 0;
   bool hit_layer[CSCConstants::NUM_LAYERS];
 
   // Clear hit_layer array to keep track of number of layers hit.
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++)
     hit_layer[i_layer] = false;
 
   // Loop over all designated patterns.
   for (int strip_num = 0; strip_num < CSCConstants::MAX_STRIPS_IN_PATTERN; strip_num++){
     if (strip_value[strip_num] == 1){
       for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++){
     // Loop over layer and see if corresponding strip is on same layer
     // If so then increment number of hits.
     if (i_layer == pattern[pattern_num][strip_num]){
       // If layer has no hits, then increment number of layers hit.
       if (hit_layer[i_layer] == false){
         layers_hit++;
         hit_layer[i_layer] = true;
       }
     }
       }
     }
   }
   // Get bend value from pattern.
   bend = pattern[pattern_num][CSCConstants::MAX_STRIPS_IN_PATTERN];
   quality = layers_hit;
 
 } // getPattern -- pre-2007 version.

bool CSCCathodeLCTProcessor::hitIsGood	(	int	hitTime,
		int	BX
	)

private

Definition at line 1464 of file CSCCathodeLCTProcessor.cc.

References dt, and hit_persist.

Referenced by getPattern().

                                                           {
   // Find out if hit time is good.  Hit should have occurred no more than
   // hit_persist clocks before the latching time.
   int dt = BX - hitTime;
   if (dt >= 0 && dt <= static_cast<int>(hit_persist)) {return true;}
   else {return false;}
 } // hitIsGood -- idealized version for MC studies.

void CSCCathodeLCTProcessor::latchLCTs	(	const unsigned int	pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		int	keyStrip[CSCConstants::MAX_CFEBS],
		unsigned int	nhits[CSCConstants::MAX_CFEBS],
		const int	stripType,
		const int	nStrips,
		const int	bx_time
	)

private

Definition at line 1703 of file CSCCathodeLCTProcessor.cc.

References cfeb_strips, infoV, LogTrace, CSCConstants::MAX_CFEBS, CSCConstants::MAX_STRIPS_IN_PATTERN, CSCConstants::NUM_LAYERS, pre_hit_pattern, and pulse().

Referenced by findLCTs().

                                                                   {
 
   bool hit_layer[CSCConstants::NUM_LAYERS];
   int key_strip, this_layer, this_strip;
   int layers_hit, prev_hits;
 
   for (int icfeb = 0; icfeb < CSCConstants::MAX_CFEBS; icfeb++) {
     keyStrip[icfeb] = -1;
     n_hits[icfeb]   =  0;
   }
 
   if (stripType != 0 && stripType != 1) {
     if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
       << "+++ latchLCTs: stripType = " << stripType
       << " does not correspond to half-strip/di-strip patterns! +++\n";
     return;
   }
 
   for (int icfeb = 0; icfeb < CSCConstants::MAX_CFEBS; icfeb++) { // loop over CFEBs
     prev_hits = 0;
     // Loop over (di-/half-)strips in CFEB.
     for (int istrip = 0; istrip < cfeb_strips[stripType]; istrip++) {
       // Calculate candidate key.
       key_strip = icfeb*cfeb_strips[stripType] + istrip;
       layers_hit = 0;
       for (int ilayer = 0; ilayer < CSCConstants::NUM_LAYERS; ilayer++)
     hit_layer[ilayer] = false;
 
       // Loop over strips in pretrigger pattern mask and look for hits.
       for (int pstrip = 0; pstrip < CSCConstants::MAX_STRIPS_IN_PATTERN; pstrip++) {
     this_layer = pre_hit_pattern[0][pstrip];
     this_strip = pre_hit_pattern[1][pstrip]+key_strip;
 
     if (this_strip >= 0 && this_strip < nStrips) {
       // Determine if "one shot" is high at this bx_time
       if (((pulse[this_layer][this_strip] >> bx_time) & 1) == 1) {
         if (hit_layer[this_layer] == false) {
           hit_layer[this_layer] = true;
           layers_hit++;                  // number of layers hit
         }
       }
     }
       } // end loop over strips in pretrigger pattern
       if (infoV > 1) {
     if (layers_hit > 0) LogTrace("CSCCathodeLCTProcessor")
       << "cfeb: " << icfeb << "  key_strip: " << key_strip
       << "  n_hits: " << layers_hit;
       }
       // If two or more keys have an equal number of hits, the lower number
       // key is taken.  Hence, replace the previous key only if this key has
       // more hits.
       if (layers_hit > prev_hits) {
     prev_hits = layers_hit;
     keyStrip[icfeb] = key_strip;  // key with highest hits is LCT key strip
     n_hits[icfeb] = layers_hit;   // corresponding hits in envelope
       }
     }  // end loop over candidate key strips in cfeb
   }  // end loop over cfebs
 } // latchLCTs -- pre-2007 version.

void CSCCathodeLCTProcessor::markBusyKeys	(	const int	best_hstrip,
		const int	best_patid,
		int	quality[CSCConstants::NUM_HALF_STRIPS_7CFEBS]
	)

private

Definition at line 2520 of file CSCCathodeLCTProcessor.cc.

References min_separation, and jets_cff::quality.

Referenced by findLCTs(), and findLCTsSLHC().

                                                                                  {
   int nspan = min_separation;
   int pspan = min_separation;
 
   // if dynamic spacing is enabled, separation is defined by pattern width
   //if (dynamic_spacing)
   //  nspan = pspan = pattern2007[best_patid][CSCConstants::MAX_HALFSTRIPS_IN_PATTERN+1]-1;
 
   for (int hstrip = best_hstrip-nspan; hstrip <= best_hstrip+pspan; hstrip++) {
     if (hstrip >= 0 && hstrip < CSCConstants::NUM_HALF_STRIPS_7CFEBS) {
       quality[hstrip] = 0;
     }
   }
 } // markBusyKeys -- TMB-07 version.

bool CSCCathodeLCTProcessor::preTrigger	(	const std::vector< int >	strip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		const int	stripType,
		const int	nStrips,
		int &	first_bx
	)

private

Definition at line 1289 of file CSCCathodeLCTProcessor.cc.

References CLCT_BEND, CLCT_BX, CLCT_NUM_QUANTITIES, CLCT_PATTERN, CLCT_QUALITY, CLCT_STRIP, drift_delay, fifo_tbins, getKeyStripData(), getPattern(), hfClusterShapes_cfi::hits, mps_fire::i, infoV, LogTrace, CSCConstants::MAX_STRIPS_IN_PATTERN, nplanes_hit_pretrig, CSCConstants::NUM_CLCT_PATTERNS_PRE_TMB07, CSCConstants::NUM_HALF_STRIPS_7CFEBS, CSCConstants::NUM_LAYERS, pre_hit_pattern, pulse(), pulseExtension(), jets_cff::quality, and digitizers_cfi::strip.

Referenced by findLCTs(), and findLCTsSLHC().

 {
   static const int hs_thresh = nplanes_hit_pretrig;
   static const int ds_thresh = nplanes_hit_pretrig;
 
   unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS];
   int i_layer, i_strip, this_layer, this_strip;
   int hits, layers_hit;
   bool hit_layer[CSCConstants::NUM_LAYERS];
 
   const int pre_trigger_layer_min = (stripType == 1) ? hs_thresh : ds_thresh;
 
   // Fire half-strip/di-strip one-shots for hit_persist bx's (6 bx's by
   // default).
   pulseExtension(strip, nStrips, pulse);
 
   // Now do a loop over different bunch-crossing times.
   for (unsigned int bx_time = 0; bx_time < fifo_tbins; bx_time++) {
     // For any given bunch-crossing, start at the lowest keystrip and look for
     // the number of separate layers in the pattern for that keystrip that have
     // pulses at that bunch-crossing time.  Do the same for the next keystrip,
     // etc.  Then do the entire process again for the next bunch-crossing, etc
     // until you find a pre-trigger.
     for (int key_strip = 0; key_strip < nStrips; key_strip++){
       // Clear variables
       hits = 0;
       layers_hit = 0;
       for (i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++)
     hit_layer[i_layer] = false;
       // Loop over pattern strips and look for hits.
       for (i_strip = 0; i_strip < CSCConstants::MAX_STRIPS_IN_PATTERN; i_strip++){
     this_layer = pre_hit_pattern[0][i_strip];
     this_strip = pre_hit_pattern[1][i_strip]+key_strip;
     if (this_strip >= 0 && this_strip < nStrips) {
       // Perform bit operation to see if pulse is 1 at a certain bx_time.
       if (((pulse[this_layer][this_strip] >> bx_time) & 1) == 1) {
         hits++;
         // Store number of layers hit.
         if (hit_layer[this_layer] == false) {
           hit_layer[this_layer] = true;
           layers_hit++;
 
           // Look if number of layers hit is greater or equal than some
           // pre-defined threshold.
           if (layers_hit >= pre_trigger_layer_min) {
         first_bx = bx_time;
         return true;
           }
         }
       }
     }
       }
     }
   }
   // If the pretrigger was never satisfied, then return false.
   return false;
 } // preTrigger -- idealized version for MC studies.

bool CSCCathodeLCTProcessor::preTrigger	(	const std::vector< int >	strip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		unsigned int	pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		const int	stripType,
		const int	nStrips,
		const int	start_bx,
		int &	first_bx
	)

private

Definition at line 1608 of file CSCCathodeLCTProcessor.cc.

References fifo_tbins, infoV, LogTrace, preTrigLookUp(), pulse(), pulseExtension(), and digitizers_cfi::strip.

                                                        {
   if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
     << "....................PreTrigger...........................";
 
   if (start_bx == 0) {
     // Fire one-shots for hit_persist bx's (6 bx's by default).
     pulseExtension(strip, nStrips, pulse);
   }
 
   bool pre_trig = false;
   // Now do a loop over bx times to see (if/when) track goes over threshold
   for (unsigned int bx_time = start_bx; bx_time < fifo_tbins; bx_time++) {
     // For any given bunch-crossing, start at the lowest keystrip and look for
     // the number of separate layers in the pattern for that keystrip that have
     // pulses at that bunch-crossing time.  Do the same for the next keystrip,
     // etc.  Then do the entire process again for the next bunch-crossing, etc
     // until you find a pre-trigger.
     pre_trig = preTrigLookUp(pulse, stripType, nStrips, bx_time);
     if (pre_trig) {
       first_bx = bx_time; // bx at time of pretrigger
       return true;
     }
   } // end loop over bx times
 
   if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
     << "no pretrigger for strip type " << stripType << ", returning \n";
   first_bx = fifo_tbins;
   return false;
 } // preTrigger -- pre-2007 version.

bool CSCCathodeLCTProcessor::preTrigger	(	const unsigned int	pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		const int	start_bx,
		int &	first_bx
	)

private

Definition at line 2334 of file CSCCathodeLCTProcessor.cc.

References best_pid, fifo_tbins, infoV, ispretrig, CSCConstants::KEY_CLCT_LAYER, LogTrace, CSCConstants::MAX_HALFSTRIPS_IN_PATTERN, nhits, nplanes_hit_pretrig, numStrips, pattern2007, pid_thresh_pretrig, ptnFinding(), pulse(), stagger, and thePreTriggerDigis.

                                                        {
   if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
     << "....................PreTrigger...........................";
 
   // Max. number of half-strips for this chamber.
   const int nStrips = 2*numStrips + 1;
 
   int nPreTriggers = 0;
 
   bool pre_trig = false;
   // Now do a loop over bx times to see (if/when) track goes over threshold
   for (unsigned int bx_time = start_bx; bx_time < fifo_tbins; bx_time++) {
     // For any given bunch-crossing, start at the lowest keystrip and look for
     // the number of separate layers in the pattern for that keystrip that have
     // pulses at that bunch-crossing time.  Do the same for the next keystrip,
     // etc.  Then do the entire process again for the next bunch-crossing, etc
     // until you find a pre-trigger.
     bool hits_in_time = ptnFinding(pulse, nStrips, bx_time);
     if (hits_in_time) {
       for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER-1];
            hstrip < nStrips; hstrip++) {
         if (infoV > 1) {
           if (nhits[hstrip] > 0) {
             LogTrace("CSCCathodeLCTProcessor")
               << " bx = " << std::setw(2) << bx_time << " --->"
               << " halfstrip = " << std::setw(3) << hstrip
               << " best pid = "  << std::setw(2) << best_pid[hstrip]
               << " nhits = "     << nhits[hstrip];
           }
         }
         ispretrig[hstrip] = false;
         if (nhits[hstrip]    >= nplanes_hit_pretrig &&
             best_pid[hstrip] >= pid_thresh_pretrig) {
           pre_trig = true;
           ispretrig[hstrip] = true;
 
           // write each pre-trigger to output
           nPreTriggers++;
           const int bend = pattern2007[best_pid[hstrip]][CSCConstants::MAX_HALFSTRIPS_IN_PATTERN];
           thePreTriggerDigis.push_back(CSCCLCTPreTriggerDigi(1, nhits[hstrip], best_pid[hstrip],
                                                           1, bend, hstrip%32, hstrip/32, bx_time, nPreTriggers, 0));
 
         }
       }
 
       if (pre_trig) {
         first_bx = bx_time; // bx at time of pretrigger
         return true;
       }
     }
   } // end loop over bx times
 
   if (infoV > 1) LogTrace("CSCCathodeLCTProcessor") <<
            "no pretrigger, returning \n";
   first_bx = fifo_tbins;
   return false;
 } // preTrigger -- TMB-07 version.

std::vector<int> CSCCathodeLCTProcessor::preTriggerBXs ( ) const

inline

Definition at line 91 of file CSCCathodeLCTProcessor.h.

References thePreTriggerBXs.

91 {return thePreTriggerBXs;}

CSCCathodeLCTProcessor::thePreTriggerBXs

std::vector< int > thePreTriggerBXs

Definition: CSCCathodeLCTProcessor.h:148

std::vector<CSCCLCTPreTriggerDigi> CSCCathodeLCTProcessor::preTriggerDigis ( ) const

inline

Definition at line 93 of file CSCCathodeLCTProcessor.h.

References debug, distripStagger(), CSCConstants::MAX_NUM_STRIPS_7CFEBS, and thePreTriggerDigis.

93 {return thePreTriggerDigis; }

CSCCathodeLCTProcessor::thePreTriggerDigis

std::vector< CSCCLCTPreTriggerDigi > thePreTriggerDigis

Definition: CSCCathodeLCTProcessor.h:149

bool CSCCathodeLCTProcessor::preTrigLookUp	(	const unsigned int	pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		const int	stripType,
		const int	nStrips,
		const unsigned int	bx_time
	)

private

Definition at line 1644 of file CSCCathodeLCTProcessor.cc.

References cfeb_strips, infoV, LogTrace, CSCConstants::MAX_CFEBS, CSCConstants::MAX_STRIPS_IN_PATTERN, nplanes_hit_pretrig, CSCConstants::NUM_LAYERS, pre_hit_pattern, and pulse().

Referenced by preTrigger().

                                    {
   static const int hs_thresh = nplanes_hit_pretrig;
   static const int ds_thresh = nplanes_hit_pretrig;
 
   bool hit_layer[CSCConstants::NUM_LAYERS];
   int key_strip, this_layer, this_strip, layers_hit;
 
   // Layers hit threshold for pretrigger
   const int pre_trigger_layer_min = (stripType == 1) ? hs_thresh : ds_thresh;
 
   if (stripType != 0 && stripType != 1) {
     if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
       << "+++ preTrigLookUp: stripType = " << stripType
       << " does not correspond to half-strip/di-strip patterns! +++\n";
     return false;
   }
 
   for (int icfeb = 0; icfeb < CSCConstants::MAX_CFEBS; icfeb++) { // loop over cfebs
     // Loop over (di-/half-)strips in CFEB.
     for (int istrip = 0; istrip < cfeb_strips[stripType]; istrip++) {
       // Calculate candidate key.
       key_strip = icfeb*cfeb_strips[stripType] + istrip;
       layers_hit = 0;
       for (int ilayer = 0; ilayer < CSCConstants::NUM_LAYERS; ilayer++)
     hit_layer[ilayer] = false;
 
       // Loop over strips in pretrigger pattern mask and look for hits.
       for (int pstrip = 0; pstrip < CSCConstants::MAX_STRIPS_IN_PATTERN; pstrip++) {
     this_layer = pre_hit_pattern[0][pstrip];
     this_strip = pre_hit_pattern[1][pstrip]+key_strip;
 
     if (this_strip >= 0 && this_strip < nStrips) {
       // Determine if "one shot" is high at this bx_time
       if (((pulse[this_layer][this_strip] >> bx_time) & 1) == 1) {
         if (hit_layer[this_layer] == false) {
           hit_layer[this_layer] = true;
           layers_hit++;                  // determines number of layers hit
           if (layers_hit >= pre_trigger_layer_min) {
         if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
           << "pretrigger at bx: " << bx_time
           << ", cfeb " << icfeb << ", returning";
         return true;
           }
         }
       }
     }
       } // end loop over strips in pretrigger pattern
     } // end loop over candidate key strips in cfeb
   } // end loop over cfebs, if pretrigger is found, stop looking and return
 
   return false;
 
 } // preTrigLookUp -- pre-2007 version.

void CSCCathodeLCTProcessor::printPatterns ( )

private

Definition at line 3061 of file CSCCathodeLCTProcessor.cc.

References gather_cfg::cout, isTMB07, CSCConstants::KEY_CLCT_LAYER, CSCConstants::KEY_CLCT_LAYER_PRE_TMB07, CSCConstants::MAX_STRIPS_IN_PATTERN, CSCConstants::NUM_CLCT_PATTERNS_PRE_TMB07, CSCConstants::NUM_LAYERS, pattern, and digitizers_cfi::strip.

                                            {
   // @@
   std::cout<<" Printing patterns for Cathode LCT"<<std::endl;
   std::cout<<"       ";
   for (int patternNum = 0; patternNum < CSCConstants::NUM_CLCT_PATTERNS_PRE_TMB07; patternNum++) {
     std::cout<<" Pattern "<<patternNum<<" ";
   }
   std::cout<<std::endl;
   std::cout<<" Layer ";
   for (int patternNum = 0; patternNum < CSCConstants::NUM_CLCT_PATTERNS_PRE_TMB07; patternNum++) {
     std::cout<<"   Bend "<<(pattern[patternNum][CSCConstants::MAX_STRIPS_IN_PATTERN]==0 ? "L": "R")<<"  ";
   }
   std::cout<<std::endl;
   for (int layer = 0; layer < CSCConstants::NUM_LAYERS; layer++) {
     for (int patternNum = 0; patternNum < CSCConstants::NUM_CLCT_PATTERNS_PRE_TMB07; patternNum++) {
       if (patternNum == 0) std::cout<<"   "<<layer<<"       ";
       if ((isTMB07  && layer != CSCConstants::KEY_CLCT_LAYER-1) ||
       (!isTMB07 && layer != CSCConstants::KEY_CLCT_LAYER_PRE_TMB07-1)) {//that old counting from 1 vs 0 thing.
         int minStrip =0;
     if ((isTMB07  && layer < CSCConstants::KEY_CLCT_LAYER-1) ||
         (!isTMB07 && layer < CSCConstants::KEY_CLCT_LAYER_PRE_TMB07-1)) {
       minStrip = 3*layer;
     } else {
       minStrip = 3*layer - 2;// since on the key layer we only have 1 strip
     }
         for (int strip = minStrip; strip < minStrip + 3; strip++) {
       if (layer == pattern[patternNum][strip]) {
         std::cout<<"X";
       } else {
         std::cout<<"_";
       }
     }
       } else {// on the key layer we always have a hit, right?
     std::cout<<" X ";
       }
       std::cout<<"        ";
     }
     std::cout<<std::endl;
   }
 }

void CSCCathodeLCTProcessor::priorityEncode	(	const int	h_keyStrip[CSCConstants::MAX_CFEBS],
		const unsigned int	h_nhits[CSCConstants::MAX_CFEBS],
		const int	d_keyStrip[CSCConstants::MAX_CFEBS],
		const unsigned int	d_nhits[CSCConstants::MAX_CFEBS],
		int	keystrip_data[2][7]
	)

private

Definition at line 1768 of file CSCCathodeLCTProcessor.cc.

References cfeb_strips, CLCT_BEND, CLCT_BX, CLCT_CFEB, CLCT_NUM_QUANTITIES, CLCT_PATTERN, CLCT_QUALITY, CLCT_STRIP, CLCT_STRIP_TYPE, drift_delay, getKeyStripData(), getPattern(), infoV, crabWrapper::key, LogTrace, CSCConstants::MAX_CFEBS, CSCConstants::MAX_CLCTS_PER_PROCESSOR, CSCConstants::MAX_STRIPS_IN_PATTERN, nplanes_hit_pattern, nplanes_hit_pretrig, CSCConstants::NUM_CLCT_PATTERNS_PRE_TMB07, CSCConstants::NUM_DI_STRIPS, CSCConstants::NUM_HALF_STRIPS, CSCConstants::NUM_HALF_STRIPS_7CFEBS, CSCConstants::NUM_LAYERS, pre_hit_pattern, and jets_cff::quality.

Referenced by findLCTs().

                                                                                  {
   static const unsigned int hs_thresh = nplanes_hit_pretrig;
   //static const unsigned int ds_thresh = nplanes_hit_pretrig;
 
   int ihits[CSCConstants::MAX_CLCTS_PER_PROCESSOR]; // hold hits for sorting
   int cfebs[CSCConstants::MAX_CLCTS_PER_PROCESSOR]; // holds CFEB numbers corresponding to highest hits
 
   int key_strip[CSCConstants::MAX_CFEBS], key_phits[CSCConstants::MAX_CFEBS], strip_type[CSCConstants::MAX_CFEBS];
 
   // initialize arrays
   for (int ilct = 0; ilct < CSCConstants::MAX_CLCTS_PER_PROCESSOR; ilct++) {
     for (int j = 0; j < CLCT_NUM_QUANTITIES; j++) keystrip_data[ilct][j] = -1;
     ihits[ilct] = 0;
     cfebs[ilct] = -1;
   }
   for (int icfeb = 0; icfeb < CSCConstants::MAX_CFEBS; icfeb++) {
     key_strip[icfeb]  = -1;
     key_phits[icfeb]  = -1;
     strip_type[icfeb] = -1;
   }
 
   if (infoV > 1) {
     LogTrace("CSCCathodeLCTProcessor")
       << ".....................PriorityEncode.......................";
     std::ostringstream strstrm;
     strstrm << "hkeys:";
     for (int icfeb = 0; icfeb < CSCConstants::MAX_CFEBS; icfeb++) {
       strstrm << std::setw(4) << h_keyStrip[icfeb];
     }
     strstrm << "\ndkeys:";
     for (int icfeb = 0; icfeb < CSCConstants::MAX_CFEBS; icfeb++) {
       strstrm << std::setw(4) << d_keyStrip[icfeb];
     }
     LogTrace("CSCCathodeLCTProcessor") << strstrm.str();
   }
 
   // Loop over CFEBs and determine better of half- or di- strip pattern.
   // If select halfstrip, promote it by adding an extra bit to its hits.
   for (int icfeb = 0; icfeb < CSCConstants::MAX_CFEBS; icfeb++) {
     if (h_keyStrip[icfeb] != -1 && d_keyStrip[icfeb] != -1) {
       if (h_nhits[icfeb] >= hs_thresh) {
     key_strip[icfeb] = h_keyStrip[icfeb];
     key_phits[icfeb] = h_nhits[icfeb] + 8; // halfstrip promotion
     strip_type[icfeb]= 1;
       }
       // For di-strip envelope there is no requirement that the number of
       // layers hit is >= ds_thresh!!!
       // else if (d_nhits[icfeb] >= ds_thresh) {
       else {
     key_strip[icfeb] = d_keyStrip[icfeb];
     key_phits[icfeb] = d_nhits[icfeb];
     strip_type[icfeb]= 0;
       }
     }
     else if (h_keyStrip[icfeb] != -1) {
       if (h_nhits[icfeb] >= hs_thresh) {
     key_strip[icfeb] = h_keyStrip[icfeb];
     key_phits[icfeb] = h_nhits[icfeb] + 8; // halfstrip promotion
     strip_type[icfeb]= 1;
       }
     }
     else if (d_keyStrip[icfeb] != -1) {
       // if (d_nhits[icfeb] >= ds_thresh) {
     key_strip[icfeb] = d_keyStrip[icfeb];
     key_phits[icfeb] = d_nhits[icfeb];
     strip_type[icfeb]= 0;
       // }
     }
     if (infoV > 1 && strip_type[icfeb] != -1) {
       if (strip_type[icfeb] == 0)
     LogTrace("CSCCathodeLCTProcessor")
       << "  taking distrip pattern on cfeb " << icfeb;
       else if (strip_type[icfeb] == 1)
     LogTrace("CSCCathodeLCTProcessor")
       << "  taking halfstrip pattern on cfeb " << icfeb;
       LogTrace("CSCCathodeLCTProcessor")
     << "     cfeb " << icfeb << " key " << key_strip[icfeb]
     << " hits " << key_phits[icfeb] << " type " << strip_type[icfeb];
     }
   }
 
   // Remove duplicate LCTs at boundaries -- it is possilbe to have key[0]
   // be the higher of the two key strips, take this into account, but
   // preserve rank of lcts.
   int key[CSCConstants::MAX_CFEBS];
   int loedge, hiedge;
 
   if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
     << "...... Remove Duplicates ......";
   for (int icfeb = 0; icfeb < CSCConstants::MAX_CFEBS; icfeb++) {
     if(strip_type[icfeb] == 0) key[icfeb] = key_strip[icfeb]*4;
     else                       key[icfeb] = key_strip[icfeb];
   }
   for (int icfeb = 0; icfeb < CSCConstants::MAX_CFEBS-1; icfeb++) {
     if (key[icfeb] >= 0 && key[icfeb+1] >= 0) {
       loedge = cfeb_strips[1]*(icfeb*8+7)/8;
       hiedge = cfeb_strips[1]*(icfeb*8+9)/8 - 1;
       if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
     << "  key 1: " << key[icfeb] << "  key 2: " << key[icfeb+1]
     << "  low edge:  " << loedge << "  high edge: " << hiedge;
       if (key[icfeb] >= loedge && key[icfeb+1] <= hiedge) {
     if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
       << "Duplicate LCTs found at boundary of CFEB " << icfeb << " ...";
     if (key_phits[icfeb+1] > key_phits[icfeb]) {
       if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
         << "   deleting LCT on CFEB " << icfeb;
       key_strip[icfeb] = -1;
       key_phits[icfeb] = -1;
     }
     else {
       if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
         << "   deleting LCT on CFEB " << icfeb+1;
       key_strip[icfeb+1] = -1;
       key_phits[icfeb+1] = -1;
     }
       }
     }
   }
 
   // Now loop over CFEBs and pick best two lcts based on no. hits in envelope.
   // In case of equal quality, select the one on lower-numbered CFEBs.
   if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
     << "\n...... Select best LCTs  ......";
   for (int icfeb = 0; icfeb < CSCConstants::MAX_CFEBS; icfeb++) {
     if (key_phits[icfeb] > ihits[0]) {
       ihits[1] = ihits[0];
       cfebs[1] = cfebs[0];
       ihits[0] = key_phits[icfeb];
       cfebs[0] = icfeb;
       if (infoV > 1) {
     std::ostringstream strstrm;
     for (int icfeb = 0; icfeb < CSCConstants::MAX_CFEBS; icfeb++) {
       strstrm << std::setw(4) << strip_type[icfeb];
     }
     LogTrace("CSCCathodeLCTProcessor")
       << "strip_type" << strstrm.str()
       << "\n best: ihits " << ihits[0] << " cfeb " << cfebs[0]
       << " strip_type " << ((cfebs[0] >= 0) ? strip_type[cfebs[0]] : -1)
       << "\n next: ihits " << ihits[1] << " cfeb " << cfebs[1]
       << " strip_type " << ((cfebs[1] >= 0) ? strip_type[cfebs[1]] : -1);
       }
     }
     else if (key_phits[icfeb] > ihits[1]) {
       ihits[1] = key_phits[icfeb];
       cfebs[1] = icfeb;
       if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
     << "\n next: ihits " << ihits[1] << " cfeb " << cfebs[1]
     << " strip_type " << ((cfebs[1] >= 0) ? strip_type[cfebs[1]] : -1);
     }
   }
 
   // fill lct data array key strip with 2 highest hit lcts (if they exist)
   int jlct = 0;
   for (int ilct = 0; ilct < CSCConstants::MAX_CLCTS_PER_PROCESSOR; ilct++) {
     if (cfebs[ilct] != -1) {
       keystrip_data[jlct][CLCT_CFEB]       = cfebs[ilct];
       keystrip_data[jlct][CLCT_STRIP]      = key_strip[cfebs[ilct]];
       keystrip_data[jlct][CLCT_STRIP_TYPE] = strip_type[cfebs[ilct]];
       if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
     << "filling key: " << key_strip[cfebs[ilct]]
     << " type: " << strip_type[cfebs[ilct]];
       jlct++;
     }
   }
 } // priorityEncode -- pre-2007 version.

bool CSCCathodeLCTProcessor::ptnFinding	(	const unsigned int	pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		const int	nStrips,
		const unsigned int	bx_time
	)

private

Definition at line 2396 of file CSCCathodeLCTProcessor.cc.

References best_pid, fifo_tbins, first_bx_corrected, hit_persist, infoV, CSCConstants::KEY_CLCT_LAYER, LogTrace, CSCConstants::MAX_HALFSTRIPS_IN_PATTERN, nhits, nplanes_hit_pretrig, CSCConstants::NUM_CLCT_PATTERNS, CSCConstants::NUM_LAYERS, pattern2007, pattern2007_offset, sysUtil::pid, pid_thresh_pretrig, pulse(), and stagger.

Referenced by findLCTs(), findLCTsSLHC(), and preTrigger().

 {
   if (bx_time >= fifo_tbins) return false;
 
   // This loop is a quick check of a number of layers hit at bx_time: since
   // most of the time it is 0, this check helps to speed-up the execution
   // substantially.
   unsigned int layers_hit = 0;
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++)
   {
     for (int i_hstrip = 0; i_hstrip < nStrips; i_hstrip++)
     {
       if (((pulse[i_layer][i_hstrip] >> bx_time) & 1) == 1)
       {
     layers_hit++;
     break;
       }
     }
   }
   if (layers_hit < nplanes_hit_pretrig) return false;
 
   for (int key_hstrip = 0; key_hstrip < nStrips; key_hstrip++)
   {
     best_pid[key_hstrip] = 0;
     nhits[key_hstrip] = 0;
     first_bx_corrected[key_hstrip] = -999;
   }
 
   // Loop over candidate key strips.
   bool hit_layer[CSCConstants::NUM_LAYERS];
   for (int key_hstrip = stagger[CSCConstants::KEY_CLCT_LAYER - 1]; key_hstrip < nStrips; key_hstrip++)
   {
     // Loop over patterns and look for hits matching each pattern.
     for (unsigned int pid = CSCConstants::NUM_CLCT_PATTERNS - 1; pid >= pid_thresh_pretrig; pid--)
     {
       layers_hit = 0;
       for (int ilayer = 0; ilayer < CSCConstants::NUM_LAYERS; ilayer++)
     hit_layer[ilayer] = false;
 
       double num_pattern_hits=0., times_sum=0.;
       std::multiset<int> mset_for_median;
       mset_for_median.clear();
 
       // Loop over halfstrips in trigger pattern mask and calculate the
       // "absolute" halfstrip number for each.
       for (int strip_num = 0; strip_num < CSCConstants::MAX_HALFSTRIPS_IN_PATTERN; strip_num++)
       {
     int this_layer = pattern2007[pid][strip_num];
         if (this_layer >= 0 && this_layer < CSCConstants::NUM_LAYERS)
         {
       int this_strip = pattern2007_offset[strip_num] + key_hstrip;
       if (this_strip >= 0 && this_strip < nStrips) {
         if (infoV > 3) LogTrace("CSCCathodeLCTProcessor")
           << " In ptnFinding: key_strip = " << key_hstrip
           << " pid = " << pid << " strip_num = " << strip_num
           << " layer = " << this_layer << " strip = " << this_strip;
         // Determine if "one shot" is high at this bx_time
             if (((pulse[this_layer][this_strip] >> bx_time) & 1) == 1)
             {
               if (hit_layer[this_layer] == false)
               {
         hit_layer[this_layer] = true;
         layers_hit++;     // determines number of layers hit
           }
 
               // find at what bx did pulse on this halsfstrip&layer have started
               // use hit_pesrist constraint on how far back we can go
               int first_bx_layer = bx_time;
               for (unsigned int dbx = 0; dbx < hit_persist; dbx++)
               {
                 if (((pulse[this_layer][this_strip] >> (first_bx_layer - 1)) & 1) == 1)
                   first_bx_layer--;
                 else
                   break;
               }
               times_sum += (double) first_bx_layer;
               num_pattern_hits += 1.;
               mset_for_median.insert(first_bx_layer);
               if (infoV > 2)
                 LogTrace("CSCCathodeLCTProcessor") << " 1st bx in layer: " << first_bx_layer << " sum bx: " << times_sum
                     << " #pat. hits: " << num_pattern_hits;
         }
       }
     }
       } // end loop over strips in pretrigger pattern
 
       if (layers_hit > nhits[key_hstrip])
       {
     best_pid[key_hstrip] = pid;
     nhits[key_hstrip] = layers_hit;
 
         // calculate median
         const int sz = mset_for_median.size();
         if (sz>0){
           std::multiset<int>::iterator im = mset_for_median.begin();
           if (sz>1) std::advance(im,sz/2-1);
           if (sz==1) first_bx_corrected[key_hstrip] = *im;
           else if ((sz % 2) == 1) first_bx_corrected[key_hstrip] = *(++im);
           else first_bx_corrected[key_hstrip] = ((*im) + (*(++im)))/2;
 
 #if defined(EDM_ML_DEBUG)
           //LogTrace only ever prints if EDM_ML_DEBUG is defined
           if (infoV > 1) {
             auto lt = LogTrace("CSCCathodeLCTProcessor")
               <<"bx="<<bx_time<<" bx_cor="<< first_bx_corrected[key_hstrip]<<"  bxset=";
             for (im = mset_for_median.begin(); im != mset_for_median.end(); im++) {
               lt<<" "<<*im;
             }
           }
 #endif
         }
     // Do not loop over the other (worse) patterns if max. numbers of
     // hits is found.
     if (nhits[key_hstrip] == CSCConstants::NUM_LAYERS) break;
       }
     } // end loop over pid
   } // end loop over candidate key strips
   return true;
 } // ptnFinding -- TMB-07 version.

void CSCCathodeLCTProcessor::pulseExtension	(	const std::vector< int >	time[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		const int	nStrips,
		unsigned int	pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS]
	)

private

Definition at line 2286 of file CSCCathodeLCTProcessor.cc.

References relativeConstraints::empty, hit_persist, mps_fire::i, infoV, CSCConstants::NUM_LAYERS, pulse(), start_bx_shift, and ntuplemaker::time.

Referenced by findLCTs(), findLCTsSLHC(), and preTrigger().

                                                                                  {
 
   static const unsigned int bits_in_pulse = 8*sizeof(pulse[0][0]);
 
   // Clear pulse array.  This array will be used as a bit representation of
   // hit times.  For example: if strip[1][2] has a value of 3, then 1 shifted
   // left 3 will be bit pattern of pulse[1][2].  This would make the pattern
   // look like 0000000000001000.  Then add on additional bits to signify
   // the duration of a signal (hit_persist, formerly bx_width) to simulate
   // the TMB's drift delay.  So for the same pulse[1][2] with a hit_persist
   // of 3 would look like 0000000000111000.  This is similating the digital
   // one-shot in the TMB.
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++)
     for (int i_strip = 0; i_strip < nStrips; i_strip++)
       pulse[i_layer][i_strip] = 0;
 
   // Loop over all layers and halfstrips.
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
     for (int i_strip = 0; i_strip < nStrips; i_strip++) {
       // If there is a hit, simulate digital one-shot persistence starting
       // in the bx of the initial hit.  Fill this into pulse[][].
       if (!time[i_layer][i_strip].empty()) {
     std::vector<int> bx_times = time[i_layer][i_strip];
     for (unsigned int i = 0; i < bx_times.size(); i++) {
       // Check that min and max times are within the allowed range.
       if (bx_times[i] < 0 || bx_times[i] + hit_persist >= bits_in_pulse) {
         if (infoV > 0) edm::LogWarning("L1CSCTPEmulatorOutOfTimeDigi")
           << "+++ BX time of comparator digi (halfstrip = " << i_strip
           << " layer = " << i_layer << ") bx = " << bx_times[i]
           << " is not within the range (0-" << bits_in_pulse
           << "] allowed for pulse extension.  Skip this digi! +++\n";
         continue;
       }
       if (bx_times[i] >= start_bx_shift) {
         for (unsigned int bx = bx_times[i]; bx < bx_times[i] + hit_persist; ++bx)
               pulse[i_layer][i_strip] = pulse[i_layer][i_strip] | (1 << bx);
           }
     }
       }
     }
   }
 } // pulseExtension.

void CSCCathodeLCTProcessor::readComparatorDigis	(	std::vector< int >	halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		std::vector< int >	distrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS]
	)

private

Definition at line 961 of file CSCCathodeLCTProcessor.cc.

References AlCaHLTBitMon_QueryRunRegistry::comp, digiV, distripStagger(), fifo_tbins, CSCComparatorDigi::getComparator(), CSCComparatorDigi::getStrip(), CSCComparatorDigi::getTimeBin(), mps_fire::i, infoV, isTMB07, LogTrace, CSCConstants::MAX_NUM_STRIPS, CSCConstants::MAX_NUM_STRIPS_7CFEBS, CSCConstants::NUM_LAYERS, numStrips, stagger, testDistripStagger(), and ntuplemaker::time.

Referenced by run().

                                                                                       {
   // Two-argument version for pre-TMB07 (halfstrip and distrips) firmware.
   // Takes the comparator & time info and stuffs it into halfstrip and (and
   // possibly distrip) vector.
 
   int time[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_STRIPS_7CFEBS];
   int comp[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_STRIPS_7CFEBS];
   int digiNum[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_STRIPS_7CFEBS];
   for (int i = 0; i < CSCConstants::NUM_LAYERS; i++){
     for (int j = 0; j < CSCConstants::MAX_NUM_STRIPS_7CFEBS; j++) {
       time[i][j]    = -999;
       comp[i][j]    =    0;
       digiNum[i][j] = -999;
     }
   }
 
   for (int i = 0; i < CSCConstants::NUM_LAYERS; i++) {
     std::vector <CSCComparatorDigi> layerDigiV = digiV[i];
     for (unsigned int j = 0; j < layerDigiV.size(); j++) {
       // Get one digi at a time for the layer.  -Jm
       CSCComparatorDigi thisDigi = layerDigiV[j];
 
       // Dump raw digi info
       if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
     << "Comparator digi: comparator = " << thisDigi.getComparator()
     << " strip #" << thisDigi.getStrip()
     << " time bin = " << thisDigi.getTimeBin();
 
       // Get comparator: 0/1 for left/right halfstrip for each comparator
       // that fired.
       int thisComparator = thisDigi.getComparator();
       if (thisComparator != 0 && thisComparator != 1) {
     if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
       << "+++ Comparator digi with wrong comparator value: digi #" << j
       << ", comparator = " << thisComparator << "; skipping it... +++\n";
     continue;
       }
 
       // Get strip number.
       int thisStrip = thisDigi.getStrip() - 1; // count from 0
       if (thisStrip < 0 || thisStrip >= numStrips) {
     if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
       << "+++ Comparator digi with wrong strip number: digi #" << j
       << ", strip = " << thisStrip
       << ", max strips = " << numStrips << "; skipping it... +++\n";
     continue;
       }
 
       // Get Bx of this Digi and check that it is within the bounds
       int thisDigiBx = thisDigi.getTimeBin();
 
       // Total number of time bins in DAQ readout is given by fifo_tbins,
       // which thus determines the maximum length of time interval.
       if (thisDigiBx >= 0 && thisDigiBx < static_cast<int>(fifo_tbins)) {
 
     // If there is more than one hit in the same strip, pick one
     // which occurred earlier.
     // In reality, the second hit on the same distrip is ignored only
     // during the number of clocks defined by the "hit_persist"
     // parameter (i.e., 6 bx's by default).  So if one simulates
     // a large number of bx's in a crowded environment, this
     // approximation here may not be sufficiently good.
     if (time[i][thisStrip] == -999 || time[i][thisStrip] > thisDigiBx) {
       digiNum[i][thisStrip] = j;
       time[i][thisStrip]    = thisDigiBx;
       comp[i][thisStrip]    = thisComparator;
       if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
         << "Comp digi: layer " << i+1
         << " digi #"           << j+1
         << " strip "           << thisStrip
         << " halfstrip "       << 2*thisStrip + comp[i][thisStrip] + stagger[i]
         << " distrip "         << thisStrip/2 + // [0-39]
           ((thisStrip%2 == 1 && comp[i][thisStrip] == 1 && stagger[i] == 1) ? 1 : 0)
         << " time "            <<    time[i][thisStrip]
         << " comparator "      <<    comp[i][thisStrip]
         << " stagger "         << stagger[i];
     }
       }
       else {
     if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
       << "+++ Skipping comparator digi: strip = " << thisStrip
       << ", layer = " << i+1 << ", bx = " << thisDigiBx << " +++";
       }
     }
   }
 
   // Take the comparator & time info and stuff it into half- and di-strip
   // arrays.
   for (int i = 0; i < CSCConstants::NUM_LAYERS; i++) {
     // Use the comparator info to setup the halfstrips and distrips.  -BT
     // This loop is only for halfstrips.
     for (int j = 0; j < CSCConstants::MAX_NUM_STRIPS_7CFEBS; j++) {
       if (time[i][j] >= 0) {
     int i_halfstrip = 2*j + comp[i][j] + stagger[i];
     // 2*j    : convert strip to 1/2 strip
     // comp   : comparator output
     // stagger: stagger for this layer
     if (i_halfstrip >= 2*numStrips + 1) {
       if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
         << "+++ Found wrong halfstrip number = " << i_halfstrip
         << "; skipping this digi... +++\n";
       continue;
     }
     halfstrip[i][i_halfstrip].push_back(time[i][j]);
       }
     }
 
     // There are no di-strips in the 2007 version of the TMB firmware.
     if (!isTMB07) {
       // This loop is only for distrips.  We have to separate the routines
       // because triad and time arrays can be changed by the distripStagger
       // routine which could mess up the halfstrips.
       static std::atomic<int> test_iteration{0};
       for (int j = 0; j < CSCConstants::MAX_NUM_STRIPS; j++){
     if (time[i][j] >= 0) {
       int i_distrip = j/2;
       if (j%2 == 1 && comp[i][j] == 1 && stagger[i] == 1) {
         // @@ Needs to be checked.
         bool stagger_debug = (infoV > 2);
         distripStagger(comp[i], time[i], digiNum[i], j, stagger_debug);
       }
       // comp[i][j] == 1    : hit on right half-strip.
       // stagger[i] == 1    : half-strips are shifted by 1.
       // if these conditions are met add 1; otherwise add 0.
       // So if there is a hit on the far right half-strip, and the
       // half-strips have been staggered to the right, then the di-strip
       // would actually correspond to the next highest di-strip.  -JM
       if (infoV > 2 && test_iteration == 1) {
         testDistripStagger();
         test_iteration++;
       }
       if (i_distrip >= numStrips/2 + 1) {
         if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
           << "+++ Found wrong distrip number = " << i_distrip
           << "; skipping this digi... +++\n";
         continue;
       }
       distrip[i][i_distrip].push_back(time[i][j]);
     }
       }
     }
   }
 }

void CSCCathodeLCTProcessor::readComparatorDigis ( std::vector< int > halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS] )

private

Definition at line 863 of file CSCCathodeLCTProcessor.cc.

References begin, digiV, fifo_tbins, hit_persist, mps_fire::i, infoV, LogTrace, CSCConstants::NUM_LAYERS, numStrips, and stagger.

                                                                                               {
   // Single-argument version for TMB07 (halfstrip-only) firmware.
   // Takes the comparator & time info and stuffs it into halfstrip vector.
   // Multiple hits on the same strip are allowed.
 
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
     int i_digi = 0; // digi counter, for dumps.
     for (std::vector<CSCComparatorDigi>::iterator pld = digiV[i_layer].begin();
      pld != digiV[i_layer].end(); pld++, i_digi++) {
       // Dump raw digi info.
       if (infoV > 1) {
     std::ostringstream strstrm;
     strstrm << "Comparator digi: comparator = " << pld->getComparator()
         << " strip #" << pld->getStrip()
         << " time bins on:";
     std::vector<int> bx_times = pld->getTimeBinsOn();
     for (unsigned int tbin = 0; tbin < bx_times.size(); tbin++)
       strstrm << " " << bx_times[tbin];
     LogTrace("CSCCathodeLCTProcessor") << strstrm.str();
       }
 
       // Get comparator: 0/1 for left/right halfstrip for each comparator
       // that fired.
       int thisComparator = pld->getComparator();
       if (thisComparator != 0 && thisComparator != 1) {
     if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
       << "+++ Found comparator digi with wrong comparator value = "
       << thisComparator << "; skipping it... +++\n";
     continue;
       }
 
       // Get strip number.
       int thisStrip = pld->getStrip() - 1; // count from 0
       if (thisStrip < 0 || thisStrip >= numStrips) {
     if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
       << "+++ Found comparator digi with wrong strip number = "
       << thisStrip
       << " (max strips = " << numStrips << "); skipping it... +++\n";
     continue;
       }
       // 2*strip: convert strip to 1/2 strip
       // comp   : comparator output
       // stagger: stagger for this layer
       int thisHalfstrip = 2*thisStrip + thisComparator + stagger[i_layer];
       if (thisHalfstrip >= 2*numStrips + 1) {
     if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
       << "+++ Found wrong halfstrip number = " << thisHalfstrip
       << "; skipping this digi... +++\n";
     continue;
       }
 
       // Get bx times on this digi and check that they are within the bounds.
       std::vector<int> bx_times = pld->getTimeBinsOn();
       for (unsigned int i = 0; i < bx_times.size(); i++) {
     // Total number of time bins in DAQ readout is given by fifo_tbins,
     // which thus determines the maximum length of time interval.
     //
     // In TMB07 version, better data-emulator agreement is
     // achieved when hits in the first 2 time bins are excluded.
     // As of May 2009, the reasons for this are not fully
     // understood yet (the work is on-going).
     if (bx_times[i] > 1 && bx_times[i] < static_cast<int>(fifo_tbins)) {
 
       if (i == 0 || (i > 0 && bx_times[i]-bx_times[i-1] >=
              static_cast<int>(hit_persist))) {
         // A later hit on the same strip is ignored during the
         // number of clocks defined by the "hit_persist" parameter
         // (i.e., 6 bx's by default).
         if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
           << "Comp digi: layer " << i_layer+1
           << " digi #"           << i_digi+1
           << " strip "           << thisStrip
           << " halfstrip "       << thisHalfstrip
           << " distrip "         << thisStrip/2 + // [0-39]
                  ((thisStrip%2 == 1 && thisComparator == 1 && stagger[i_layer] == 1) ? 1 : 0)
           << " time "            << bx_times[i]
           << " comparator "      << thisComparator
           << " stagger "         << stagger[i_layer];
         halfstrip[i_layer][thisHalfstrip].push_back(bx_times[i]);
       }
       else if (i > 0) {
         if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
           << " Skipping comparator digi: strip = " << thisStrip
           << ", layer = " << i_layer+1 << ", bx = " << bx_times[i]
           << ", bx of previous hit = " << bx_times[i-1];
       }
     }
     else {
       if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
         << "+++ Skipping comparator digi: strip = " << thisStrip
         << ", layer = " << i_layer+1 << ", bx = " << bx_times[i] << " +++";
     }
       }
     }
   }
 }

std::vector< CSCCLCTDigi > CSCCathodeLCTProcessor::readoutCLCTs ( )

Returns vector of CLCTs in the read-out time window, if any.

Definition at line 2876 of file CSCCathodeLCTProcessor.cc.

References early_tbins, getCLCTs(), infoV, LogDebug, CSCConstants::MAX_CLCT_TBINS, readout_earliest_2, and tmb_l1a_window_size.

                                                             {
   std::vector<CSCCLCTDigi> tmpV;
 
   // The start time of the L1A*CLCT coincidence window should be
   // related to the fifo_pretrig parameter, but I am not completely
   // sure how.  For now, just choose it such that the window is
   // centered at bx=7.  This may need further tweaking if the value of
   // tmb_l1a_window_size changes.
 
   // The number of CLCT bins in the read-out is given by the
   // tmb_l1a_window_size parameter, but made even by setting the LSB
   // of tmb_l1a_window_size to 0.
   //
   static std::atomic<int> lct_bins;
     lct_bins = (tmb_l1a_window_size%2 == 0) ? tmb_l1a_window_size : tmb_l1a_window_size-1;
   static std::atomic<int> late_tbins;
     late_tbins = early_tbins + lct_bins;
 
   static std::atomic<int> ifois{0};
   if (ifois == 0) {
     if (infoV >= 0 && early_tbins < 0) {
       edm::LogWarning("L1CSCTPEmulatorSuspiciousParameters")
     << "+++ early_tbins = " << early_tbins
     << "; in-time CLCTs are not getting read-out!!! +++" << "\n";
     }
 
     if (late_tbins > CSCConstants::MAX_CLCT_TBINS-1) {
       if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorSuspiciousParameters")
     << "+++ Allowed range of time bins, [0-" << late_tbins
     << "] exceeds max allowed, " << CSCConstants::MAX_CLCT_TBINS-1 << " +++\n"
     << "+++ Set late_tbins to max allowed +++\n";
       late_tbins = CSCConstants::MAX_CLCT_TBINS-1;
     }
     ifois = 1;
   }
 
   // Start from the vector of all found CLCTs and select those within
   // the CLCT*L1A coincidence window.
   int bx_readout = -1;
   std::vector<CSCCLCTDigi> all_lcts = getCLCTs();
   for (std::vector <CSCCLCTDigi>::const_iterator plct = all_lcts.begin();
        plct != all_lcts.end(); plct++) {
     if (!plct->isValid()) continue;
 
     int bx = (*plct).getBX();
     // Skip CLCTs found too early relative to L1Accept.
     if (bx <= early_tbins) {
       if (infoV > 1) LogDebug("CSCCathodeLCTProcessor")
     << " Do not report CLCT on key halfstrip " << plct->getKeyStrip()
     << ": found at bx " << bx << ", whereas the earliest allowed bx is "
     << early_tbins+1;
       continue;
     }
 
     // Skip CLCTs found too late relative to L1Accept.
     if (bx > late_tbins) {
       if (infoV > 1) LogDebug("CSCCathodeLCTProcessor")
     << " Do not report CLCT on key halfstrip " << plct->getKeyStrip()
     << ": found at bx " << bx << ", whereas the latest allowed bx is "
     << late_tbins;
       continue;
     }
 
     // If (readout_earliest_2) take only CLCTs in the earliest bx in the read-out window:
     // in digi->raw step, LCTs have to be packed into the TMB header, and
     // currently there is room just for two.
     if (readout_earliest_2) {
       if (bx_readout == -1 || bx == bx_readout) {
         tmpV.push_back(*plct);
         if (bx_readout == -1) bx_readout = bx;
       }
     }
     else tmpV.push_back(*plct);
   }
   return tmpV;
 }

std::vector< CSCCLCTDigi > CSCCathodeLCTProcessor::run ( const CSCComparatorDigiCollection * compdc )

Runs the LCT processor code. Called in normal running – gets info from a collection of comparator digis.

Definition at line 560 of file CSCCathodeLCTProcessor.cc.

References alctClctOffset, relativeConstraints::chamber, CSCGeometry::chamber(), CSCTriggerNumbering::chamberFromTriggerLabels(), csc_g, disableME1a, dumpConfigParams(), relativeConstraints::empty, gangedME1a, getCLCTs(), getDigis(), infoV, isME11, isSLHC, isTMB07, CSCConstants::MAX_NUM_STRIPS_7CFEBS, nplanes_hit_pretrig, CSCConstants::NUM_HALF_STRIPS_7CFEBS, CSCConstants::NUM_LAYERS, numStrips, AlCaHLTBitMon_ParallelJobs::p, readComparatorDigis(), relativeConstraints::ring, CSCTriggerNumbering::ringFromTriggerLabels(), smartME1aME1b, stagger, theChamber, theEndcap, theRing, theSector, theStation, theSubsector, and theTrigChamber.

Referenced by setCSCGeometry().

                                                                      {
   // This is the version of the run() function that is called when running
   // over the entire detector.  It gets the comparator & timing info from the
   // comparator digis and then passes them on to another run() function.
 
   // clear(); // redundant; called by L1MuCSCMotherboard.
 
   static std::atomic<bool> config_dumped{false};
   if ((infoV > 0 || isSLHC) && !config_dumped) {
     //std::cerr<<"**** CLCT run parameters dump ****"<<std::endl;
     dumpConfigParams();
     config_dumped = true;
   }
 
   // Get the number of strips and stagger of layers for the given chamber.
   // Do it only once per chamber.
   if (numStrips == 0) {
     const int ring = CSCTriggerNumbering::ringFromTriggerLabels(theStation, theTrigChamber);
     const int chid = CSCTriggerNumbering::chamberFromTriggerLabels(theSector, theSubsector, theStation, theTrigChamber);
     CSCDetId detid(theEndcap, theStation, ring, chid, 0);
     const auto& chamber = csc_g->chamber(detid);
 
     if (chamber) {
       numStrips = chamber->layer(1)->geometry()->numberOfStrips();
       // ME1/a is known to the readout hardware as strips 65-80 of ME1/1.
       // Still need to decide whether we do any special adjustments to
       // reconstruct LCTs in this region (3:1 ganged strips); for now, we
       // simply allow for hits in ME1/a and apply standard reconstruction
       // to them.
       // For SLHC ME1/1 is set to have 4 CFEBs in ME1/b and 3 CFEBs in ME1/a
       if (isME11) {
     if (!smartME1aME1b && !disableME1a && theRing == 1 && !gangedME1a) numStrips = 112;
     if (!smartME1aME1b && !disableME1a && theRing == 1 && gangedME1a) numStrips = 80;
     if (!smartME1aME1b &&  disableME1a && theRing == 1 ) numStrips = 64;
     if ( smartME1aME1b && !disableME1a && theRing == 1 ) numStrips = 64;
     if ( smartME1aME1b && !disableME1a && theRing == 4 ) {
       if (gangedME1a) numStrips = 16;
       else numStrips = 48;
     }
       }
 
       if (numStrips > CSCConstants::MAX_NUM_STRIPS_7CFEBS) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorSetupError")
       << "+++ Number of strips, " << numStrips
       << " found in ME" << ((theEndcap == 1) ? "+" : "-")
       << theStation << "/" << theRing << "/" << theChamber
       << " (sector " << theSector << " subsector " << theSubsector
       << " trig id. " << theTrigChamber << ")"
       << " exceeds max expected, " << CSCConstants::MAX_NUM_STRIPS_7CFEBS
       << " +++\n"
       << "+++ CSC geometry looks garbled; no emulation possible +++\n";
     numStrips = -1;
       }
       // The strips for a given layer may be offset from the adjacent layers.
       // This was done in order to improve resolution.  We need to find the
       // 'staggering' for each layer and make necessary conversions in our
       // arrays.  -JM
       // In the TMB-07 firmware, half-strips in odd layers (layers are
       // counted as ly0-ly5) are shifted by -1 half-strip, whereas in
       // the previous firmware versions half-strips in even layers
       // were shifted by +1 half-strip.  This difference is due to a
       // change from ly3 to ly2 in the choice of the key layer, and
       // the intention to keep half-strips in the key layer unchanged.
       // In the emulator, we use the old way for both cases, to avoid
       // negative half-strip numbers.  This will necessitate a
       // subtraction of 1 half-strip for TMB-07 later on. -SV.
       for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
     stagger[i_layer] =
       (chamber->layer(i_layer+1)->geometry()->stagger() + 1) / 2;
       }
     }
     else {
       if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
     << " ME" << ((theEndcap == 1) ? "+" : "-")
         << theStation << "/" << theRing << "/" << theChamber
     << " (sector " << theSector << " subsector " << theSubsector
     << " trig id. " << theTrigChamber << ")"
     << " is not defined in current geometry! +++\n"
     << "+++ CSC geometry looks garbled; no emulation possible +++\n";
       numStrips = -1;
     }
   }
 
   if (numStrips < 0) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << " ME" << ((theEndcap == 1) ? "+" : "-")
       << theStation << "/" << theRing << "/" << theChamber
       << " (sector " << theSector << " subsector " << theSubsector
       << " trig id. " << theTrigChamber << "):"
       << " numStrips = " << numStrips << "; CLCT emulation skipped! +++";
     std::vector<CSCCLCTDigi> emptyV;
     return emptyV;
   }
 
   // Get comparator digis in this chamber.
   bool noDigis = getDigis(compdc);
 
   if (!noDigis) {
     // Get halfstrip (and possibly distrip) times from comparator digis.
     std::vector<int>
       halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS];
     std::vector<int>
       distrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS];
     if (isTMB07) { // TMB07 (latest) version: halfstrips only.
       readComparatorDigis(halfstrip);
     }
     else { // Earlier versions: halfstrips and distrips.
       readComparatorDigis(halfstrip, distrip);
     }
 
     // Pass arrays of halfstrips and distrips on to another run() doing the
     // LCT search.
     // If the number of layers containing digis is smaller than that
     // required to trigger, quit right away.  (If LCT-based digi suppression
     // is implemented one day, this condition will have to be changed
     // to the number of planes required to pre-trigger.)
     unsigned int layersHit = 0;
     for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
       for (int i_hstrip = 0; i_hstrip < CSCConstants::NUM_HALF_STRIPS_7CFEBS;
        i_hstrip++) {
     if (!halfstrip[i_layer][i_hstrip].empty()) {layersHit++; break;}
       }
     }
     // Run the algorithm only if the probability for the pre-trigger
     // to fire is not null.  (Pre-trigger decisions are used for the
     // strip read-out conditions in DigiToRaw.)
     if (layersHit >= nplanes_hit_pretrig) run(halfstrip, distrip);
   }
 
   // Return vector of CLCTs.
   std::vector<CSCCLCTDigi> tmpV = getCLCTs();
 
   // shift the BX from 7 to 8
   // the unpacked real data CLCTs have central BX at bin 7
   // however in simulation the central BX  is bin 8
   // to make a proper comparison with ALCTs we need
   // CLCT and ALCT to have the central BX in the same bin
   // this shift does not affect the readout of the CLCTs
   // emulated CLCTs put in the event should be centered at bin 7 (as in data)
   for (auto& p : tmpV){
     p.setBX(p.getBX() + alctClctOffset);
   }
 
   return tmpV;
 }

void CSCCathodeLCTProcessor::run	(	const std::vector< int >	halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS],
		const std::vector< int >	distrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS]
	)

Called in test mode and by the run(compdc) function; does the actual LCT finding.

Definition at line 706 of file CSCCathodeLCTProcessor.cc.

References bestCLCT, findLCTs(), findLCTsSLHC(), mps_fire::i, infoV, isME11, isMTCC, isSLHC, isTMB07, LogDebug, CSCConstants::MAX_CLCT_TBINS, secondCLCT, CSCCLCTDigi::setTrknmb(), smartME1aME1b, theChamber, theEndcap, theRing, theSector, theStation, theSubsector, theTrigChamber, and use_dead_time_zoning.

                                                                                             {
   // This version of the run() function can either be called in a standalone
   // test, being passed the halfstrip and distrip times, or called by the
   // run() function above.  It uses the findLCTs() method to find vectors
   // of LCT candidates. These candidates are sorted and the best two per bx
   // are returned.
   std::vector<CSCCLCTDigi> LCTlist;
 
   if (isTMB07) {
     // Upgrade version for ME11 with better dead-time handling
     if (isSLHC && smartME1aME1b && isME11 && use_dead_time_zoning) LCTlist = findLCTsSLHC(halfstrip);
     // TMB07 version of the CLCT algorithm.
     else LCTlist = findLCTs(halfstrip);
   }
   else if (isMTCC) { // MTCC version.
     LCTlist = findLCTs(halfstrip, distrip);
   }
   else { // Idealized algorithm of many years ago.
     std::vector<CSCCLCTDigi> halfStripLCTs = findLCTs(halfstrip, 1);
     std::vector<CSCCLCTDigi> diStripLCTs   = findLCTs(distrip,   0);
     // Put all the candidates into a single vector and sort them.
     for (unsigned int i = 0; i < halfStripLCTs.size(); i++)
       LCTlist.push_back(halfStripLCTs[i]);
     for (unsigned int i = 0; i < diStripLCTs.size(); i++)
       LCTlist.push_back(diStripLCTs[i]);
   }
 
   // LCT sorting.
   if (LCTlist.size() > 1)
     sort(LCTlist.begin(), LCTlist.end(), std::greater<CSCCLCTDigi>());
 
   // Take the best two candidates per bx.
   for (std::vector<CSCCLCTDigi>::const_iterator plct = LCTlist.begin();
        plct != LCTlist.end(); plct++) {
     int bx = plct->getBX();
     if (bx >= CSCConstants::MAX_CLCT_TBINS) {
       if (infoV > 0) edm::LogWarning("L1CSCTPEmulatorOutOfTimeCLCT")
     << "+++ Bx of CLCT candidate, " << bx << ", exceeds max allowed, "
     << CSCConstants::MAX_CLCT_TBINS-1 << "; skipping it... +++\n";
       continue;
     }
 
     if (!bestCLCT[bx].isValid()) bestCLCT[bx] = *plct;
     else if (!secondCLCT[bx].isValid()) {
       // Ignore CLCT if it is the same as the best (i.e. if the same
       // CLCT was found in both half- and di-strip pattern search).
       // This can never happen in the test beam and MTCC
       // implementations.
       if (!isMTCC && !isTMB07 && *plct == bestCLCT[bx]) continue;
       secondCLCT[bx] = *plct;
     }
   }
 
   for (int bx = 0; bx < CSCConstants::MAX_CLCT_TBINS; bx++) {
     if (bestCLCT[bx].isValid()) {
       bestCLCT[bx].setTrknmb(1);
       if (infoV > 0) LogDebug("CSCCathodeLCTProcessor")
     << bestCLCT[bx] << " found in ME" << ((theEndcap == 1) ? "+" : "-")
         << theStation << "/" << theRing << "/" << theChamber
     << " (sector " << theSector << " subsector " << theSubsector
     << " trig id. " << theTrigChamber << ")" << "\n";
     }
     if (secondCLCT[bx].isValid()) {
       secondCLCT[bx].setTrknmb(2);
       if (infoV > 0) LogDebug("CSCCathodeLCTProcessor")
     << secondCLCT[bx] << " found in ME" << ((theEndcap == 1) ? "+" : "-")
         << theStation << "/" << theRing << "/" << theChamber
     << " (sector " << theSector << " subsector " << theSubsector
     << " trig id. " << theTrigChamber << ")" << "\n";
     }
   }
   // Now that we have our best CLCTs, they get correlated with the best
   // ALCTs and then get sent to the MotherBoard.  -JM
 }

void CSCCathodeLCTProcessor::setConfigParameters ( const CSCDBL1TPParameters * conf )

Sets configuration parameters obtained via EventSetup mechanism.

Definition at line 432 of file CSCCathodeLCTProcessor.cc.

                                                                                 {
   static std::atomic<bool> config_dumped{false};
 
   fifo_tbins   = conf->clctFifoTbins();
   fifo_pretrig = conf->clctFifoPretrig();
   hit_persist  = conf->clctHitPersist();
   drift_delay  = conf->clctDriftDelay();
   nplanes_hit_pretrig = conf->clctNplanesHitPretrig();
   nplanes_hit_pattern = conf->clctNplanesHitPattern();
 
   // TMB07 parameters.
   if (isTMB07) {
     pid_thresh_pretrig = conf->clctPidThreshPretrig();
     min_separation     = conf->clctMinSeparation();
   }
 
   // Check and print configuration parameters.
   checkConfigParameters();
   if (!config_dumped) {
     //std::cerr<<"**** CLCT setConfigParams parameters dump ****"<<std::endl;
     dumpConfigParams();
     config_dumped = true;
   }
 }

void CSCCathodeLCTProcessor::setCSCGeometry ( const CSCGeometry * g )

inline

Definition at line 64 of file CSCCathodeLCTProcessor.h.

References csc_g, g, getDigis(), CSCConstants::NUM_HALF_STRIPS_7CFEBS, CSCConstants::NUM_LAYERS, and run().

64 { csc_g = g; }

g

The Signals That Services Can Subscribe To This is based on ActivityRegistry and is current per Services can connect to the signals distributed by the ActivityRegistry in order to monitor the activity of the application Each possible callback has some defined which we here list in angle e g

Definition: Activities.doc:4

CSCCathodeLCTProcessor::csc_g

const CSCGeometry * csc_g

Definition: CSCCathodeLCTProcessor.h:137

void CSCCathodeLCTProcessor::setDefaultConfigParameters ( )

private

Set default values for configuration parameters.

Definition at line 410 of file CSCCathodeLCTProcessor.cc.

References def_drift_delay, def_fifo_pretrig, def_fifo_tbins, def_hit_persist, def_min_separation, def_nplanes_hit_pattern, def_nplanes_hit_pretrig, def_pid_thresh_pretrig, def_tmb_l1a_window_size, drift_delay, fifo_pretrig, fifo_tbins, hit_persist, isMTCC, isTMB07, min_separation, nplanes_hit_pattern, nplanes_hit_pretrig, pid_thresh_pretrig, and tmb_l1a_window_size.

Referenced by CSCCathodeLCTProcessor().

                                                         {
   // Set default values for configuration parameters.
   fifo_tbins   = def_fifo_tbins;
   fifo_pretrig = def_fifo_pretrig;
   hit_persist  = def_hit_persist;
   drift_delay  = def_drift_delay;
   nplanes_hit_pretrig = def_nplanes_hit_pretrig;
   nplanes_hit_pattern = def_nplanes_hit_pattern;
 
   isMTCC = false;
 
   // New TMB07 parameters.
   isTMB07 = true;
   if (isTMB07) {
     pid_thresh_pretrig = def_pid_thresh_pretrig;
     min_separation     = def_min_separation;
   }
 
   tmb_l1a_window_size = def_tmb_l1a_window_size;
 }

void CSCCathodeLCTProcessor::setRing ( unsigned r )

inline

Set ring number Has to be done for upgrade ME1a!

Definition at line 103 of file CSCCathodeLCTProcessor.h.

References alignCSCRings::r, and theRing.

103 {theRing = r;}

alignCSCRings.r

r

Definition: alignCSCRings.py:92

CSCCathodeLCTProcessor::theRing

unsigned int theRing

Definition: CSCCathodeLCTProcessor.h:140

void CSCCathodeLCTProcessor::testDistripStagger ( )

private

Definition at line 2967 of file CSCCathodeLCTProcessor.cc.

References gather_cfg::cout, debug, distripStagger(), mps_fire::i, and CSCConstants::NUM_DI_STRIPS.

Referenced by readComparatorDigis().

                                                 {
   // Author: Jason Mumford (mumford@physics.ucla.edu)
   // This routine tests the distripStagger routine.
   // @@
   bool debug = true;
   int test_triad[CSCConstants::NUM_DI_STRIPS], test_time[CSCConstants::NUM_DI_STRIPS];
   int test_digi[CSCConstants::NUM_DI_STRIPS];
   int distrip = 0;
   test_triad[distrip] = 3;    //After routine, I expect 4
   test_triad[distrip+1] = 3;  //                        4
   test_triad[distrip+2] = 3;  //                        4
   test_triad[distrip+3] = 3;  //                        4
   test_triad[distrip+4] = 3;  //                        4
   test_triad[distrip+5] = 3;  //                        4
   test_triad[distrip+6] = 3;  //                        4
   test_triad[distrip+7] = 3;  //                        4
   test_triad[distrip+8] = 3;  //                        4
   test_triad[distrip+9] = 3;  //                        4
   test_triad[distrip+10] = 2;  //                       2
 
   test_time[distrip] = 4;     //      ""      ""        0
   test_time[distrip+1] = 10;  //                        4
   test_time[distrip+2] = 2;   //                        10
   test_time[distrip+3] = 0;   //                        2
   test_time[distrip+4] = 6;   //                        2
   test_time[distrip+5] = 8;   //                        2
   test_time[distrip+6] = 10;   //                        2
   test_time[distrip+7] = 1;   //                        2
   test_time[distrip+8] = 8;   //                        2
   test_time[distrip+9] = 5;   //                        2
   test_time[distrip+10] = 6;   //                        2
 
   std::cout << "\n ------------------------------------------------- \n";
   std::cout << "!!!!!!Testing distripStagger routine!!!!!!" << std::endl;
   std::cout << "Values before distripStagger routine:" << std::endl;
   for (int i=distrip; i<distrip+11; i++){
     test_digi[i] = 999;
     std::cout << "test_triad[" << i << "] = " << test_triad[i];
     std::cout << "   test_time[" << i << "] = " << test_time[i] << std::endl;
   }
   distripStagger(test_triad, test_time, test_digi, distrip, debug);
   std::cout << "Values after distripStagger routine:" << std::endl;
   for (int i=distrip; i<distrip+11; i++){
     std::cout << "test_triad[" << i << "] = " << test_triad[i];
     std::cout << "   test_time[" << i << "] = " << test_time[i] << std::endl;
   }
   std::cout << "\n ------------------------------------------------- \n \n";
 }

void CSCCathodeLCTProcessor::testLCTs ( )

private

Definition at line 3016 of file CSCCathodeLCTProcessor.cc.

References CSCCLCTDigi::getBend(), CSCCLCTDigi::getBX(), CSCCLCTDigi::getCFEB(), CSCCLCTDigi::getKeyStrip(), CSCCLCTDigi::getPattern(), CSCCLCTDigi::getQuality(), CSCCLCTDigi::getStripType(), LogTrace, CSCConstants::MAX_CFEBS, CSCConstants::NUM_HALF_STRIPS_PER_CFEB, and jets_cff::quality.

                                       {
   // test to make sure what goes into an LCT is what comes out.
   for (int ptn = 0; ptn < 8; ptn++) {
     for (int bend = 0; bend < 2; bend++) {
       for (int cfeb = 0; cfeb < CSCConstants::MAX_CFEBS; cfeb++) {
     for (int key_strip = 0; key_strip < CSCConstants::NUM_HALF_STRIPS_PER_CFEB; key_strip++) {
       for (int bx = 0; bx < 7; bx++) {
         for (int stripType = 0; stripType < 2; stripType++) {
           for (int quality = 3; quality < 6; quality++) {
         CSCCLCTDigi thisLCT(1, quality, ptn, stripType, bend,
                     key_strip, cfeb, bx);
         if (ptn != thisLCT.getPattern())
           LogTrace("CSCCathodeLCTProcessor")
             << "pattern mismatch: " << ptn << " "
             << thisLCT.getPattern();
         if (bend != thisLCT.getBend())
           LogTrace("CSCCathodeLCTProcessor")
             << "bend mismatch: " << bend << " " << thisLCT.getBend();
         if (cfeb != thisLCT.getCFEB())
           LogTrace("CSCCathodeLCTProcessor")
             << "cfeb mismatch: " << cfeb << " " << thisLCT.getCFEB();
         if (key_strip != thisLCT.getKeyStrip())
           LogTrace("CSCCathodeLCTProcessor")
             << "strip mismatch: " << key_strip << " "
             << thisLCT.getKeyStrip();
         if (bx != thisLCT.getBX())
           LogTrace("CSCCathodeLCTProcessor")
             << "bx mismatch: " << bx << " " << thisLCT.getBX();
         if (stripType != thisLCT.getStripType())
           LogTrace("CSCCathodeLCTProcessor")
             << "Strip Type mismatch: " << stripType << " "
             << thisLCT.getStripType();
         if (quality != thisLCT.getQuality())
           LogTrace("CSCCathodeLCTProcessor")
             << "quality mismatch: " << quality << " "
             << thisLCT.getQuality();
           }
         }
       }
     }
       }
     }
   }
 }

void CSCCathodeLCTProcessor::testPatterns ( )

private

Definition at line 3102 of file CSCCathodeLCTProcessor.cc.

References gather_cfg::cout, relativeConstraints::empty, findLCTs(), findNumLayersHit(), getPattern(), isTMB07, CSCConstants::KEY_CLCT_LAYER, CSCConstants::KEY_CLCT_LAYER_PRE_TMB07, CSCConstants::NUM_HALF_STRIPS_7CFEBS, CSCConstants::NUM_LAYERS, convertSQLitetoXML_cfg::output, pattern, mps_update::results, and digitizers_cfi::strip.

                                           {
 //generate all possible combinations of hits in a given area and see what we find.
 // Benn Tannenbaum 21 June 2001
 
   //there are 16 strips in our uber-pattern, each of which can be on or off.
   // 2^16 = 65536
   for (int possibleHits = 0; possibleHits < 65536; possibleHits++) {
     std::vector<int> stripsHit[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS_7CFEBS];
     //assign one bit to each strip in an array. I'll start centered around strip 10.
     stripsHit[0][ 9].push_back(( possibleHits &     1 ) != 0);     // 2^0
     stripsHit[0][10].push_back(( possibleHits &     2 ) != 0);     // 2^1
     stripsHit[0][11].push_back(( possibleHits &     4 ) != 0);     // 2^2
     stripsHit[1][ 9].push_back(( possibleHits &     8 ) != 0);     // 2^3
     stripsHit[1][10].push_back(( possibleHits &    16 ) != 0);     // 2^4
     stripsHit[1][11].push_back(( possibleHits &    32 ) != 0);     // 2^5
     stripsHit[2][ 9].push_back(( possibleHits &    64 ) != 0);     // 2^6
     stripsHit[2][10].push_back(( possibleHits &   128 ) != 0);     // 2^7
     stripsHit[2][11].push_back(( possibleHits &   256 ) != 0);     // 2^8
     stripsHit[3][10].push_back(( possibleHits &   512 ) != 0);     // 2^9
     stripsHit[4][ 9].push_back(( possibleHits &  1024 ) != 0);     // 2^10
     stripsHit[4][10].push_back(( possibleHits &  2048 ) != 0);     // 2^11
     stripsHit[4][11].push_back(( possibleHits &  4096 ) != 0);     // 2^12
     stripsHit[5][ 9].push_back(( possibleHits &  8192 ) != 0);     // 2^13
     stripsHit[5][10].push_back(( possibleHits & 16384 ) != 0);     // 2^14
     stripsHit[5][11].push_back(( possibleHits & 32768 ) != 0);     // 2^15
     int numLayersHit = findNumLayersHit(stripsHit);
     std::vector <CSCCLCTDigi> results = findLCTs(stripsHit, 1);
 // print out whatever we find-- but only ones where 4 or more layers are hit
 // OR ones where we find something
 // key: X    a hit there and was used to find pattern
 //      x    a hit not involved in pattern
 //      _    empty strip
 //      o    a hit was there, but no pattern was found
     if (numLayersHit > 3 || !results.empty()) {
       std::cout<<"Input "<<possibleHits<<"/"<< 65536 <<" # Found Patterns "<<results.size()<<std::endl<<" ";
       for (int layer = 0; layer < CSCConstants::NUM_LAYERS; layer++) {
     if ((isTMB07  && layer != CSCConstants::KEY_CLCT_LAYER - 1) ||
         (!isTMB07 && layer != CSCConstants::KEY_CLCT_LAYER_PRE_TMB07 - 1)) {
       for (int strip = 9; strip < 12; strip++) {
         if (!stripsHit[layer][strip].empty()) {
           if (!results.empty()) {
             int thePatternStrip = strip - (results[0].getKeyStrip() - 2) + 3*layer;
         if ((isTMB07 && layer>=CSCConstants::KEY_CLCT_LAYER) ||
             (!isTMB07 && layer>=CSCConstants::KEY_CLCT_LAYER_PRE_TMB07))
           thePatternStrip -= 2;
 
             if (pattern[results[0].getPattern()][thePatternStrip] == layer)
         {
           std::cout<<"X";
         } else {
           std::cout<<"x";
         }
               } else {
             std::cout<<"o";
               }
         } else {
           std::cout<<"_";
         }
       }
       std::cout<<"   ";
       for (unsigned int output = 0; output < results.size(); output++) {
         int minStrip;
         if ((isTMB07 && layer < CSCConstants::KEY_CLCT_LAYER-1) ||
         (!isTMB07 && layer < CSCConstants::KEY_CLCT_LAYER_PRE_TMB07-1))  {
           minStrip = 3*layer;
         } else {
           minStrip = 3*layer - 2;// since on the key layer we only have 1 strip
         }
             for (int strip = minStrip; strip < minStrip + 3; strip++) {
           if (layer == pattern[results[output].getPattern()][strip]) {
         std::cout<<"X";
           } else {
         std::cout<<"_";
           }
         }
         std::cout<<"  ";
           }
     } else {
           if (!stripsHit[layer][10].empty()) {
         std::cout<<" X ";
       } else {
         std::cout<<" _ ";
       }
       for (unsigned int output = 0; output < results.size(); output++)
         std::cout<<"    X   ";
     }
     if (layer < static_cast<int>(results.size()) ) {
       std::cout<<results[layer];
       std::cout<<" ";
     } else {
       std::cout<<" "<<std::endl<<" ";
     }
       }
     }
   }
 }

Member Data Documentation

unsigned int CSCCathodeLCTProcessor::alctClctOffset

private

Offset between ALCT and CLCT in simulation. This is important when ALCTs (at BX0=8) and CLCTs (at BX0=7) are correlated in the trigger motherboard.

Definition at line 163 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), and run().

unsigned int CSCCathodeLCTProcessor::best_pid[CSCConstants::NUM_HALF_STRIPS_7CFEBS]

private

Definition at line 275 of file CSCCathodeLCTProcessor.h.

Referenced by findLCTs(), findLCTsSLHC(), preTrigger(), and ptnFinding().

CSCCLCTDigi CSCCathodeLCTProcessor::bestCLCT[CSCConstants::MAX_CLCT_TBINS]

Best LCT in this chamber, as found by the processor.

Definition at line 80 of file CSCCathodeLCTProcessor.h.

Referenced by clear(), getCLCTs(), and run().

const int CSCCathodeLCTProcessor::cfeb_strips

staticprivate

Initial value:

= {
  CSCConstants::NUM_DISTRIPS_PER_CFEB, 
  CSCConstants::NUM_HALF_STRIPS_PER_CFEB
}

Number of di-strips/half-strips per CFEB.

Definition at line 210 of file CSCCathodeLCTProcessor.h.

Referenced by dumpDigis(), findLCTs(), findLCTsSLHC(), latchLCTs(), preTrigLookUp(), and priorityEncode().

unsigned int CSCCathodeLCTProcessor::clct_state_machine_zone

private

Definition at line 183 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), and findLCTsSLHC().

const CSCGeometry* CSCCathodeLCTProcessor::csc_g

private

Definition at line 137 of file CSCCathodeLCTProcessor.h.

Referenced by run(), and setCSCGeometry().

const unsigned int CSCCathodeLCTProcessor::def_drift_delay = 2

staticprivate

Definition at line 197 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCCathodeLCTProcessor::def_fifo_pretrig = 7

staticprivate

Definition at line 196 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCCathodeLCTProcessor::def_fifo_tbins = 12

staticprivate

Default values of configuration parameters.

Definition at line 196 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCCathodeLCTProcessor::def_hit_persist = 6

staticprivate

Definition at line 197 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCCathodeLCTProcessor::def_min_separation = 10

staticprivate

Definition at line 200 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCCathodeLCTProcessor::def_nplanes_hit_pattern = 4

staticprivate

Definition at line 199 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCCathodeLCTProcessor::def_nplanes_hit_pretrig = 2

staticprivate

Definition at line 198 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCCathodeLCTProcessor::def_pid_thresh_pretrig = 2

staticprivate

Definition at line 200 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCCathodeLCTProcessor::def_tmb_l1a_window_size = 7

staticprivate

Definition at line 201 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

std::vector<CSCComparatorDigi> CSCCathodeLCTProcessor::digiV[CSCConstants::NUM_LAYERS]

private

Definition at line 147 of file CSCCathodeLCTProcessor.h.

Referenced by getDigis(), and readComparatorDigis().

bool CSCCathodeLCTProcessor::disableME1a

private

Definition at line 176 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), getDigis(), and run().

unsigned int CSCCathodeLCTProcessor::drift_delay

private

Definition at line 167 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), findLCTs(), findLCTsSLHC(), preTrigger(), priorityEncode(), setConfigParameters(), and setDefaultConfigParameters().

bool CSCCathodeLCTProcessor::dynamic_state_machine_zone

private

Definition at line 184 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), and findLCTsSLHC().

int CSCCathodeLCTProcessor::early_tbins

private

VK: separate handle for early time bins

Definition at line 179 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), and readoutCLCTs().

unsigned int CSCCathodeLCTProcessor::fifo_pretrig

private

Definition at line 166 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), setConfigParameters(), and setDefaultConfigParameters().

unsigned int CSCCathodeLCTProcessor::fifo_tbins

private

Configuration parameters.

Definition at line 166 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), findLCTs(), findLCTsSLHC(), preTrigger(), ptnFinding(), readComparatorDigis(), setConfigParameters(), and setDefaultConfigParameters().

int CSCCathodeLCTProcessor::first_bx_corrected[CSCConstants::NUM_HALF_STRIPS_7CFEBS]

private

Definition at line 277 of file CSCCathodeLCTProcessor.h.

Referenced by findLCTsSLHC(), and ptnFinding().

bool CSCCathodeLCTProcessor::gangedME1a

private

Definition at line 176 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), getDigis(), and run().

unsigned int CSCCathodeLCTProcessor::hit_persist

private

Definition at line 167 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), hitIsGood(), ptnFinding(), pulseExtension(), readComparatorDigis(), setConfigParameters(), and setDefaultConfigParameters().

int CSCCathodeLCTProcessor::infoV

private

Verbosity level: 0: no print (default). 1: print only CLCTs found. 2: info at every step of the algorithm. 3: add special-purpose prints.

Definition at line 128 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), findLCTs(), findLCTsSLHC(), getDigis(), latchLCTs(), preTrigger(), preTrigLookUp(), priorityEncode(), ptnFinding(), pulseExtension(), readComparatorDigis(), readoutCLCTs(), and run().

bool CSCCathodeLCTProcessor::isME11

private

Definition at line 142 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), and run().

bool CSCCathodeLCTProcessor::isMTCC

private

Flag for "real" - not idealized - version of the algorithm.

Definition at line 152 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), run(), and setDefaultConfigParameters().

bool CSCCathodeLCTProcessor::ispretrig[CSCConstants::NUM_HALF_STRIPS_7CFEBS]

private

Definition at line 284 of file CSCCathodeLCTProcessor.h.

Referenced by findLCTsSLHC(), and preTrigger().

bool CSCCathodeLCTProcessor::isSLHC

private

Flag for SLHC studies.

Definition at line 158 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), and run().

bool CSCCathodeLCTProcessor::isTMB07

private

Flag for 2007 firmware version.

Definition at line 155 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), printPatterns(), readComparatorDigis(), run(), setConfigParameters(), setDefaultConfigParameters(), and testPatterns().

unsigned int CSCCathodeLCTProcessor::min_separation

private

Definition at line 169 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), markBusyKeys(), setConfigParameters(), and setDefaultConfigParameters().

unsigned int CSCCathodeLCTProcessor::nhits[CSCConstants::NUM_HALF_STRIPS_7CFEBS]

private

Definition at line 276 of file CSCCathodeLCTProcessor.h.

Referenced by findLCTs(), findLCTsSLHC(), preTrigger(), and ptnFinding().

unsigned int CSCCathodeLCTProcessor::nplanes_hit_pattern

private

Definition at line 168 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), findLCTs(), findLCTsSLHC(), priorityEncode(), setConfigParameters(), and setDefaultConfigParameters().

unsigned int CSCCathodeLCTProcessor::nplanes_hit_pretrig

private

Definition at line 168 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), preTrigger(), preTrigLookUp(), priorityEncode(), ptnFinding(), run(), setConfigParameters(), and setDefaultConfigParameters().

int CSCCathodeLCTProcessor::numStrips

private

Definition at line 144 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), findLCTs(), findLCTsSLHC(), preTrigger(), readComparatorDigis(), and run().

const int CSCCathodeLCTProcessor::pattern

static

Definition at line 107 of file CSCCathodeLCTProcessor.h.

Referenced by getPattern(), dataset.BaseDataset::printFiles(), printPatterns(), and testPatterns().

const int CSCCathodeLCTProcessor::pattern2007

static

Definition at line 110 of file CSCCathodeLCTProcessor.h.

Referenced by findLCTs(), findLCTsSLHC(), preTrigger(), and ptnFinding().

const int CSCCathodeLCTProcessor::pattern2007_offset

static

Initial value:

=
  {  -5,  -4,  -3,  -2,  -1,   0,   1,   2,   3,   4,   5,
                    -2,  -1,   0,   1,   2,
                               0,
                    -2,  -1,   0,   1,   2,
          -4,  -3,  -2,  -1,   0,   1,   2,   3,   4,
     -5,  -4,  -3,  -2,  -1,   0,   1,   2,   3,   4,   5 }

Definition at line 109 of file CSCCathodeLCTProcessor.h.

Referenced by ptnFinding().

unsigned int CSCCathodeLCTProcessor::pid_thresh_pretrig

private

Definition at line 169 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), preTrigger(), ptnFinding(), setConfigParameters(), and setDefaultConfigParameters().

const int CSCCathodeLCTProcessor::pre_hit_pattern

static

Initial value:

= {
  { 999,  0,  0,  0,  999,
    999,  1,  1,  1,  999,
    999,  2,  2,  2,  999,
              3,                
    999,  4,  4,  4,  999,
    999,  5,  5,  5,  999},
  
  { 999, -1,  0,  1,  999,
    999, -1,  0,  1,  999,
    999, -1,  0,  1,  999,
              0,                
    999, -1,  0,  1,  999,
    999, -1,  0,  1,  999}
}

Pre-defined patterns.

Definition at line 106 of file CSCCathodeLCTProcessor.h.

Referenced by latchLCTs(), preTrigger(), preTrigLookUp(), and priorityEncode().

unsigned int CSCCathodeLCTProcessor::pretrig_trig_zone

private

VK: allow triggers only in +-pretrig_trig_zone around pretriggers

Definition at line 187 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), and findLCTsSLHC().

bool CSCCathodeLCTProcessor::readout_earliest_2

private

VK: whether to readout only the earliest two LCTs in readout window

Definition at line 193 of file CSCCathodeLCTProcessor.h.