define MonitorEnsembple to be used More...

#include <SingleTopTChannelLeptonDQM.h>

Inheritance diagram for SingleTopTChannelLeptonDQM:

Public Member Functions
void	analyze (const edm::Event &event, const edm::EventSetup &setup) override
	do this during the event loop More...

	SingleTopTChannelLeptonDQM (const edm::ParameterSet &cfg)
	default constructor More...

	~SingleTopTChannelLeptonDQM () override
	default destructor More...

Public Member Functions inherited from DQMEDAnalyzer
void	accumulate (edm::Event const &ev, edm::EventSetup const &es) final

virtual void	analyze (edm::Event const &, edm::EventSetup const &)

void	beginLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) override

void	beginRun (edm::Run const &run, edm::EventSetup const &setup) final

virtual void	dqmBeginRun (edm::Run const &, edm::EventSetup const &)

	DQMEDAnalyzer ()

	DQMEDAnalyzer (DQMEDAnalyzer const &)=delete

	DQMEDAnalyzer (DQMEDAnalyzer &&)=delete

void	endLuminosityBlock (edm::LuminosityBlock const &, edm::EventSetup const &) override

void	endLuminosityBlockProduce (edm::LuminosityBlock &lumi, edm::EventSetup const &setup) final

void	endRun (edm::Run const &run, edm::EventSetup const &setup) override

void	endRunProduce (edm::Run &run, edm::EventSetup const &setup) override

	~DQMEDAnalyzer () override=default

Public Member Functions inherited from edm::one::EDProducer< edm::Accumulator, edm::EndLuminosityBlockProducer, edm::EndRunProducer, edm::one::WatchLuminosityBlocks, edm::one::WatchRuns >
	EDProducer ()=default

SerialTaskQueue *	globalLuminosityBlocksQueue () final

SerialTaskQueue *	globalRunsQueue () final

bool	hasAbilityToProduceInLumis () const final

bool	hasAbilityToProduceInRuns () const final

bool	wantsGlobalLuminosityBlocks () const final

bool	wantsGlobalRuns () const final

Public Member Functions inherited from edm::one::EDProducerBase
	EDProducerBase ()

ModuleDescription const &	moduleDescription () const

bool	wantsStreamLuminosityBlocks () const

bool	wantsStreamRuns () const

	~EDProducerBase () override

Public Member Functions inherited from edm::ProducerBase
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)

std::vector< edm::ProductResolverIndex > const &	indiciesForPutProducts (BranchType iBranchType) const

	ProducerBase ()

std::vector< edm::ProductResolverIndex > const &	putTokenIndexToProductResolverIndex () const

void	registerProducts (ProducerBase , ProductRegistry , ModuleDescription const &)

std::function< void(BranchDescription const &)>	registrationCallback () const
	used by the fwk to register list of products More...

void	resolvePutIndicies (BranchType iBranchType, ModuleToResolverIndicies const &iIndicies, std::string const &moduleLabel)

	~ProducerBase () override

Public Member Functions inherited from edm::EDConsumerBase
std::vector< ConsumesInfo >	consumesInfo () const

void	convertCurrentProcessAlias (std::string const &processName)
	Convert "@currentProcess" in InputTag process names to the actual current process name. More...

	EDConsumerBase ()

	EDConsumerBase (EDConsumerBase const &)=delete

	EDConsumerBase (EDConsumerBase &&)=default

ProductResolverIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const

void	itemsMayGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const

void	itemsToGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const

std::vector< ProductResolverIndexAndSkipBit > const &	itemsToGetFrom (BranchType iType) const

void	labelsForToken (EDGetToken iToken, Labels &oLabels) const

void	modulesWhoseProductsAreConsumed (std::vector< ModuleDescription const * > &modules, ProductRegistry const &preg, std::map< std::string, ModuleDescription const * > const &labelsToDesc, std::string const &processName) const

EDConsumerBase const &	operator= (EDConsumerBase const &)=delete

EDConsumerBase &	operator= (EDConsumerBase &&)=default

bool	registeredToConsume (ProductResolverIndex, bool, BranchType) const

bool	registeredToConsumeMany (TypeID const &, BranchType) const

ProductResolverIndexAndSkipBit	uncheckedIndexFrom (EDGetToken) const

void	updateLookup (BranchType iBranchType, ProductResolverIndexHelper const &, bool iPrefetchMayGet)

virtual	~EDConsumerBase () noexcept(false)

Protected Member Functions
void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override

Protected Member Functions inherited from edm::EDConsumerBase
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)

EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)

ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...

template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()

void	consumesMany (const TypeToGet &id)

template<BranchType B>
void	consumesMany (const TypeToGet &id)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)

EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

Private Member Functions
std::string	objectType (const std::string &label)

std::string	selectionStep (const std::string &label)

Private Attributes
edm::InputTag	beamspot_
	beamspot More...

edm::EDGetTokenT< reco::BeamSpot >	beamspot__

std::unique_ptr< StringCutObjectSelector< reco::BeamSpot > >	beamspotSelect_
	string cut selector More...

std::vector< std::unique_ptr< SelectionStep< reco::CaloJet > > >	CaloJetSteps

std::unique_ptr< SelectionStep< reco::GsfElectron > >	ElectronStep

std::vector< std::unique_ptr< SelectionStep< reco::Jet > > >	JetSteps

std::unique_ptr< SelectionStep< reco::MET > >	METStep

std::unique_ptr< SelectionStep< reco::Muon > >	MuonStep

std::unique_ptr< SelectionStep< reco::PFCandidate > >	PFElectronStep

std::vector< std::unique_ptr< SelectionStep< reco::PFJet > > >	PFJetSteps

std::unique_ptr< SelectionStep< reco::PFCandidate > >	PFMuonStep

std::unique_ptr< SelectionStep< reco::Vertex > >	PvStep

std::vector< edm::ParameterSet >	sel

std::map< std::string, std::pair< edm::ParameterSet, std::unique_ptr< SingleTopTChannelLepton::MonitorEnsemble > > >	selection_

std::vector< std::string >	selectionOrder_

std::vector< std::string >	triggerPaths_
	trigger paths More...

edm::EDGetTokenT< edm::TriggerResults >	triggerTable__
	trigger table More...

edm::InputTag	vertex_
	primary vertex More...

edm::EDGetTokenT< reco::Vertex >	vertex__

std::unique_ptr< StringCutObjectSelector< reco::Vertex > >	vertexSelect_
	string cut selector More...

Additional Inherited Members
Public Types inherited from edm::one::EDProducerBase
typedef EDProducerBase	ModuleType

Public Types inherited from edm::ProducerBase
using	ModuleToResolverIndicies = std::unordered_multimap< std::string, std::tuple< edm::TypeID const , const char , edm::ProductResolverIndex >>

typedef ProductRegistryHelper::TypeLabelList	TypeLabelList

Public Types inherited from edm::EDConsumerBase
typedef ProductLabels	Labels

Static Public Member Functions inherited from edm::one::EDProducerBase
static const std::string &	baseType ()

static void	fillDescriptions (ConfigurationDescriptions &descriptions)

static void	prevalidate (ConfigurationDescriptions &descriptions)

Protected Attributes inherited from DQMEDAnalyzer
edm::EDPutTokenT< DQMToken >	lumiToken_

edm::EDPutTokenT< DQMToken >	runToken_

Detailed Description

define MonitorEnsembple to be used

Module to apply a monitored selection of top like events in the semi-leptonic channel.

"DQM/Physics/plugins/SingleTopTChannelLeptonDQM.h"

Plugin to apply a monitored selection of top like events with some minimal flexibility in the number and definition of the selection steps. To achieve this flexibility it employes the SelectionStep class. The MonitorEnsemble class is used to provide a well defined set of histograms to be monitored after each selection step. The SelectionStep class provides a flexible and intuitive selection via the StringCutParser. SelectionStep and MonitorEnsemble classes are interleaved. The monitoring starts after a preselection step (which is not monitored in the context of this module) with an instance of the MonitorEnsemble class. The following objects are supported for selection:

jets : of type reco::Jet (jets), reco::CaloJet (jets/calo) or reco::PFJet (jets/pflow)
elecs : of type reco::GsfElectron
muons : of type reco::Muon
met : of type reco::MET

These types have to be present as prefix of the selection step paramter label separated from the rest of the label by a ':' (e.g. in the form "jets:step0"). The class expects selection labels of this type. They will be disentangled by the private helper functions objectType and seletionStep as declared below.

Definition at line 299 of file SingleTopTChannelLeptonDQM.h.

Constructor & Destructor Documentation

SingleTopTChannelLeptonDQM::SingleTopTChannelLeptonDQM ( const edm::ParameterSet & cfg )

default constructor

Definition at line 726 of file SingleTopTChannelLeptonDQM.cc.

References beamspot_, beamspot__, beamspotSelect_, CaloJetSteps, edm::EDConsumerBase::consumesCollector(), ElectronStep, edm::ParameterSet::existsAs(), plotBeamSpotDB::first, edm::ParameterSet::getParameter(), mps_fire::i, JetSteps, crabWrapper::key, METStep, MuonStep, objectType(), PFElectronStep, PFJetSteps, PFMuonStep, PvStep, sel, selection_, selectionOrder_, selectionStep(), AlCaHLTBitMon_QueryRunRegistry::string, triggerPaths_, and triggerTable__.

     : vertexSelect_(nullptr),
       beamspot_(""),
       beamspotSelect_(nullptr),
       MuonStep(nullptr),
       PFMuonStep(nullptr),
       ElectronStep(nullptr),
       PFElectronStep(nullptr),
       PvStep(nullptr),
       METStep(nullptr) {
   JetSteps.clear();
   CaloJetSteps.clear();
   PFJetSteps.clear();
   // configure preselection
   edm::ParameterSet presel =
       cfg.getParameter<edm::ParameterSet>("preselection");
   if (presel.existsAs<edm::ParameterSet>("trigger")) {
     edm::ParameterSet trigger =
         presel.getParameter<edm::ParameterSet>("trigger");
     triggerTable__ = consumes<edm::TriggerResults>(
         trigger.getParameter<edm::InputTag>("src"));
     triggerPaths_ = trigger.getParameter<std::vector<std::string>>("select");
   }
   if (presel.existsAs<edm::ParameterSet>("beamspot")) {
     edm::ParameterSet beamspot =
         presel.getParameter<edm::ParameterSet>("beamspot");
     beamspot_ = beamspot.getParameter<edm::InputTag>("src");
     beamspot__ =
         consumes<reco::BeamSpot>(beamspot.getParameter<edm::InputTag>("src"));
     beamspotSelect_.reset(new StringCutObjectSelector<reco::BeamSpot>(
         beamspot.getParameter<std::string>("select")));
   }
   // configure the selection
    std::vector<edm::ParameterSet> sel = 
       cfg.getParameter<std::vector<edm::ParameterSet>>("selection");
 
   for (unsigned int i = 0; i < sel.size(); ++i) {
     selectionOrder_.push_back(sel.at(i).getParameter<std::string>("label"));
     selection_[selectionStep(selectionOrder_.back())] = std::make_pair(
         sel.at(i),
         std::unique_ptr<SingleTopTChannelLepton::MonitorEnsemble>(
         new SingleTopTChannelLepton::MonitorEnsemble(
             selectionStep(selectionOrder_.back()).c_str(),
             cfg.getParameter<edm::ParameterSet>("setup"),
             cfg.getParameter<std::vector<edm::ParameterSet>>("selection"),
             consumesCollector())));
   }
   for (std::vector<std::string>::const_iterator selIt = selectionOrder_.begin();
        selIt != selectionOrder_.end(); ++selIt) {
     std::string key = selectionStep(*selIt), type = objectType(*selIt);
     if (selection_.find(key) != selection_.end()) {
       using std::unique_ptr;
 
       if (type == "muons") {
         MuonStep.reset(new SelectionStep<reco::Muon>(selection_[key].first,
                                                      consumesCollector()));
       }
       if (type == "muons/pf") {
         PFMuonStep.reset(new SelectionStep<reco::PFCandidate>(
             selection_[key].first, consumesCollector()));
       }
       if (type == "elecs") {
         ElectronStep.reset(new SelectionStep<reco::GsfElectron>(
             selection_[key].first, consumesCollector()));
       }
       if (type == "elecs/pf") {
         PFElectronStep.reset(new SelectionStep<reco::PFCandidate>(
             selection_[key].first, consumesCollector()));
       }
       if (type == "pvs") {
         PvStep.reset(new SelectionStep<reco::Vertex>(selection_[key].first,
                                                      consumesCollector()));
       }
       if (type == "jets") {
         JetSteps.push_back(std::unique_ptr<SelectionStep<reco::Jet>>(
             new SelectionStep<reco::Jet>(selection_[key].first,
                                          consumesCollector())));
       }
       if (type == "jets/pf") {
         PFJetSteps.push_back(std::unique_ptr<SelectionStep<reco::PFJet>>(
             new SelectionStep<reco::PFJet>(selection_[key].first,
                                            consumesCollector())));
       }
       if (type == "jets/calo") {
         CaloJetSteps.push_back(std::unique_ptr<SelectionStep<reco::CaloJet>>(
             new SelectionStep<reco::CaloJet>(selection_[key].first,
                                              consumesCollector())));
       }
       if (type == "met") {
         METStep.reset(new SelectionStep<reco::MET>(selection_[key].first,
                                                    consumesCollector()));
       }
     }
   }
 }

SingleTopTChannelLeptonDQM::~SingleTopTChannelLeptonDQM ( )

inlineoverride

default destructor

Definition at line 304 of file SingleTopTChannelLeptonDQM.h.

References analyze(), bookHistograms(), and GeneralSetup::setup().

304 {};

Member Function Documentation

void SingleTopTChannelLeptonDQM::analyze	(	const edm::Event &	event,
		const edm::EventSetup &	setup
	)

override

do this during the event loop

Definition at line 828 of file SingleTopTChannelLeptonDQM.cc.

References accept(), hiMultiTrackSelector_cfi::beamspot, beamspot__, beamspotSelect_, CaloJetSteps, ElectronStep, edm::Event::getByToken(), edm::EDGetTokenT< T >::isUninitialized(), JetSteps, crabWrapper::key, METStep, MuonStep, objectType(), TriggerAnalyzer::passed, PFElectronStep, PFJetSteps, PFMuonStep, TauGenJetsDecayModeSelectorAllHadrons_cfi::select, selection_, selectionOrder_, selectionStep(), AlCaHLTBitMon_QueryRunRegistry::string, triggerPaths_, and triggerTable__.

                                                                      {
   if (!triggerTable__.isUninitialized()) {
     edm::Handle<edm::TriggerResults> triggerTable;
     if (!event.getByToken(triggerTable__, triggerTable)) return;
     if (!accept(event, *triggerTable, triggerPaths_)) return;
   }
   if (!beamspot__.isUninitialized()) {
     edm::Handle<reco::BeamSpot> beamspot;
     if (!event.getByToken(beamspot__, beamspot)) return;
     if (!(*beamspotSelect_)(*beamspot)) return;
   }
   // apply selection steps
   unsigned int passed = 0;
   unsigned int nJetSteps = -1;
   unsigned int nPFJetSteps = -1;
   unsigned int nCaloJetSteps = -1;
   for (std::vector<std::string>::const_iterator selIt = selectionOrder_.begin();
        selIt != selectionOrder_.end(); ++selIt) {
     std::string key = selectionStep(*selIt), type = objectType(*selIt);
     if (selection_.find(key) != selection_.end()) {
       if (type == "empty") {
         selection_[key].second->fill(event, setup);
       }
       if (type == "presel") {
         selection_[key].second->fill(event, setup);
       }
       if (type == "elecs" && ElectronStep != nullptr) {
         if (ElectronStep->select(event)) {
           ++passed;
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
       if (type == "elecs/pf" && PFElectronStep != nullptr) {
 
         if (PFElectronStep->select(event, "electron")) {
           ++passed;
 
           selection_[key].second->fill(event, setup);
 
         } else
           break;
       }
       if (type == "muons" && MuonStep != nullptr) {
         if (MuonStep->select(event)) {
           ++passed;
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
       if (type == "muons/pf" && PFMuonStep != nullptr) {
         if (PFMuonStep->select(event, "muon")) {
           ++passed;
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
       if (type == "jets") {
         nJetSteps++;
         if (JetSteps[nJetSteps]) {
           if (JetSteps[nJetSteps]->select(event, setup)) {
             ++passed;
             selection_[key].second->fill(event, setup);
           } else
             break;
         }
       }
       if (type == "jets/pf") {
         nPFJetSteps++;
         if (PFJetSteps[nPFJetSteps]) {
           if (PFJetSteps[nPFJetSteps]->select(event, setup)) {
             ++passed;
             selection_[key].second->fill(event, setup);
           } else
             break;
         }
       }
       if (type == "jets/calo") {
         nCaloJetSteps++;
         if (CaloJetSteps[nCaloJetSteps]) {
           if (CaloJetSteps[nCaloJetSteps]->select(event, setup)) {
             ++passed;
             selection_[key].second->fill(event, setup);
           } else
             break;
         }
       }
       if (type == "met" && METStep != nullptr) {
         if (METStep->select(event)) {
           ++passed;
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
     }
   }
 }

void SingleTopTChannelLeptonDQM::bookHistograms	(	DQMStore::IBooker &	ibooker,
		edm::Run const &	,
		edm::EventSetup const &
	)

overrideprotectedvirtual

Implements DQMEDAnalyzer.

Definition at line 822 of file SingleTopTChannelLeptonDQM.cc.

References selection_.

                                          {
   for (auto selIt = selection_.begin(); selIt != selection_.end(); ++selIt) {
     selIt->second.second->book(ibooker);
   }
 }

std::string SingleTopTChannelLeptonDQM::objectType ( const std::string & label )

inlineprivate

deduce object type from ParameterSet label, the label is expected to be of type 'objectType:selectionStep'

Definition at line 317 of file SingleTopTChannelLeptonDQM.h.

Referenced by analyze(), and SingleTopTChannelLeptonDQM().

                                                {
     return label.substr(0, label.find(':'));
   };

std::string SingleTopTChannelLeptonDQM::selectionStep ( const std::string & label )

inlineprivate

deduce selection step from ParameterSet label, the label is expected to be of type 'objectType:selectionStep'

Definition at line 322 of file SingleTopTChannelLeptonDQM.h.

Referenced by analyze(), and SingleTopTChannelLeptonDQM().

                                                   {
     return label.substr(label.find(':') + 1);
   };

Member Data Documentation

edm::InputTag SingleTopTChannelLeptonDQM::beamspot_

private

beamspot

Definition at line 339 of file SingleTopTChannelLeptonDQM.h.

Referenced by SingleTopTChannelLeptonDQM().

edm::EDGetTokenT<reco::BeamSpot> SingleTopTChannelLeptonDQM::beamspot__

private

Definition at line 340 of file SingleTopTChannelLeptonDQM.h.

Referenced by analyze(), and SingleTopTChannelLeptonDQM().

std::unique_ptr<StringCutObjectSelector<reco::BeamSpot> > SingleTopTChannelLeptonDQM::beamspotSelect_

private

string cut selector

Definition at line 342 of file SingleTopTChannelLeptonDQM.h.

Referenced by analyze(), and SingleTopTChannelLeptonDQM().

std::vector<std::unique_ptr<SelectionStep<reco::CaloJet> > > SingleTopTChannelLeptonDQM::CaloJetSteps

private

Definition at line 365 of file SingleTopTChannelLeptonDQM.h.

Referenced by analyze(), and SingleTopTChannelLeptonDQM().

std::unique_ptr<SelectionStep<reco::GsfElectron> > SingleTopTChannelLeptonDQM::ElectronStep

private

Definition at line 360 of file SingleTopTChannelLeptonDQM.h.

Referenced by analyze(), and SingleTopTChannelLeptonDQM().

std::vector<std::unique_ptr<SelectionStep<reco::Jet> > > SingleTopTChannelLeptonDQM::JetSteps

private

Definition at line 364 of file SingleTopTChannelLeptonDQM.h.

Referenced by analyze(), and SingleTopTChannelLeptonDQM().

std::unique_ptr<SelectionStep<reco::MET> > SingleTopTChannelLeptonDQM::METStep

private

Definition at line 368 of file SingleTopTChannelLeptonDQM.h.

Referenced by analyze(), and SingleTopTChannelLeptonDQM().

std::unique_ptr<SelectionStep<reco::Muon> > SingleTopTChannelLeptonDQM::MuonStep

private

Definition at line 358 of file SingleTopTChannelLeptonDQM.h.

Referenced by analyze(), and SingleTopTChannelLeptonDQM().

std::unique_ptr<SelectionStep<reco::PFCandidate> > SingleTopTChannelLeptonDQM::PFElectronStep

private

Definition at line 361 of file SingleTopTChannelLeptonDQM.h.

Referenced by analyze(), and SingleTopTChannelLeptonDQM().

std::vector<std::unique_ptr<SelectionStep<reco::PFJet> > > SingleTopTChannelLeptonDQM::PFJetSteps

private

Definition at line 366 of file SingleTopTChannelLeptonDQM.h.

Referenced by analyze(), and SingleTopTChannelLeptonDQM().

std::unique_ptr<SelectionStep<reco::PFCandidate> > SingleTopTChannelLeptonDQM::PFMuonStep

private

Definition at line 359 of file SingleTopTChannelLeptonDQM.h.

Referenced by analyze(), and SingleTopTChannelLeptonDQM().

std::unique_ptr<SelectionStep<reco::Vertex> > SingleTopTChannelLeptonDQM::PvStep

private

Definition at line 362 of file SingleTopTChannelLeptonDQM.h.

Referenced by SingleTopTChannelLeptonDQM().

std::vector<edm::ParameterSet> SingleTopTChannelLeptonDQM::sel

private

Definition at line 369 of file SingleTopTChannelLeptonDQM.h.

Referenced by SingleTopTChannelLeptonDQM().

std::map< std::string, std::pair<edm::ParameterSet, std::unique_ptr<SingleTopTChannelLepton::MonitorEnsemble> > > SingleTopTChannelLeptonDQM::selection_

private

this is the heart component of the plugin; std::string keeps a label the selection step for later identification, edm::ParameterSet keeps the configuration of the selection for the SelectionStep class, MonitoringEnsemble keeps an instance of the MonitorEnsemble class to be filled after each selection step

Definition at line 356 of file SingleTopTChannelLeptonDQM.h.

Referenced by analyze(), bookHistograms(), and SingleTopTChannelLeptonDQM().

std::vector<std::string> SingleTopTChannelLeptonDQM::selectionOrder_

private

needed to guarantee the selection order as defined by the order of ParameterSets in the selection vector as defined in the config

Definition at line 346 of file SingleTopTChannelLeptonDQM.h.

Referenced by analyze(), and SingleTopTChannelLeptonDQM().

std::vector<std::string> SingleTopTChannelLeptonDQM::triggerPaths_

private

trigger paths

Definition at line 331 of file SingleTopTChannelLeptonDQM.h.

Referenced by analyze(), and SingleTopTChannelLeptonDQM().