#include <SiPixelDigitizerAlgorithm.h>

Classes
class	Amplitude

class	CalParameters

class	EnergyDepositUnit

struct	PixelAging

struct	PixelEfficiencies

class	SignalPoint

Public Member Functions
void	accumulateSimHits (const std::vector< PSimHit >::const_iterator inputBegin, const std::vector< PSimHit >::const_iterator inputEnd, const size_t inputBeginGlobalIndex, const unsigned int tofBin, const PixelGeomDetUnit pixdet, const GlobalVector &bfield, const TrackerTopology tTopo, CLHEP::HepRandomEngine *)

void	calculateInstlumiFactor (PileupMixingContent *puInfo)

void	digitize (const PixelGeomDetUnit pixdet, std::vector< PixelDigi > &digis, std::vector< PixelDigiSimLink > &simlinks, const TrackerTopology tTopo, CLHEP::HepRandomEngine *)

void	init (const edm::EventSetup &es)

void	init_DynIneffDB (const edm::EventSetup &, const unsigned int &)

void	initializeEvent ()

	SiPixelDigitizerAlgorithm (const edm::ParameterSet &conf)

	~SiPixelDigitizerAlgorithm ()

Private Types
typedef GloballyPositioned< double >	Frame

typedef std::vector< edm::ParameterSet >	Parameters

typedef signal_map_type::const_iterator	signal_map_const_iterator

typedef signal_map_type::iterator	signal_map_iterator

typedef std::map< int, Amplitude, std::less< int > >	signal_map_type

typedef std::map< uint32_t, signal_map_type >	signalMaps

Private Member Functions
void	add_noise (const PixelGeomDetUnit pixdet, float thePixelThreshold, CLHEP::HepRandomEngine )

double	calcQ (float x) const

void	drift (const PSimHit &hit, const PixelGeomDetUnit pixdet, const GlobalVector &bfield, const TrackerTopology tTopo, const std::vector< EnergyDepositUnit > &ionization_points, std::vector< SignalPoint > &collection_points) const

LocalVector	DriftDirection (const PixelGeomDetUnit *pixdet, const GlobalVector &bfield, const DetId &detId) const

void	fluctuateEloss (int particleId, float momentum, float eloss, float length, int NumberOfSegments, float elossVector[], CLHEP::HepRandomEngine *) const

void	induce_signal (const PSimHit &hit, const size_t hitIndex, const unsigned int tofBin, const PixelGeomDetUnit *pixdet, const std::vector< SignalPoint > &collection_points)

std::map< int, CalParameters, std::less< int > >	initCal () const

void	make_digis (float thePixelThresholdInE, uint32_t detID, const PixelGeomDetUnit pixdet, std::vector< PixelDigi > &digis, std::vector< PixelDigiSimLink > &simlinks, const TrackerTopology tTopo) const

float	missCalibrate (uint32_t detID, const TrackerTopology tTopo, const PixelGeomDetUnit pixdet, int col, int row, float amp) const

void	module_killing_conf (uint32_t detID)

void	module_killing_DB (uint32_t detID)

float	pixel_aging (const PixelAging &aging, const PixelGeomDetUnit pixdet, const TrackerTopology tTopo) const

void	pixel_inefficiency (const PixelEfficiencies &eff, const PixelGeomDetUnit pixdet, const TrackerTopology tTopo, CLHEP::HepRandomEngine *)

void	pixel_inefficiency_db (uint32_t detID)

void	primary_ionization (const PSimHit &hit, std::vector< EnergyDepositUnit > &ionization_points, CLHEP::HepRandomEngine *) const

Private Attributes
signalMaps	_signal

const bool	addChargeVCALSmearing

const bool	addNoise

const bool	addNoisyPixels

const bool	AddPixelAging

const bool	AddPixelInefficiency

const bool	addThresholdSmearing

const bool	alpha2Order

const float	BPix_p0

const float	BPix_p1

const float	BPix_p2

const float	BPix_p3

const std::map< int, CalParameters, std::less< int > >	calmap

const float	ClusterWidth

const Parameters	DeadModules

const float	Dist300

const bool	doMissCalibrate

const float	electronsPerVCAL

const float	electronsPerVCAL_L1

const float	electronsPerVCAL_L1_Offset

const float	electronsPerVCAL_Offset

const std::unique_ptr< SiG4UniversalFluctuation >	fluctuate

const bool	fluctuateCharge

const float	FPix_p0

const float	FPix_p1

const float	FPix_p2

const float	FPix_p3

edm::ESHandle< TrackerGeometry >	geom_

const float	GeVperElectron

const bool	makeDigiSimLinks_

edm::ESHandle< SiPixelFedCablingMap >	map_

const int	NumberOfBarrelLayers

const int	NumberOfEndcapDisks

const PixelAging	pixelAging_

PixelEfficiencies	pixelEfficiencies_

const float	Sigma0

edm::ESHandle< SiPixelQuality >	SiPixelBadModule_

edm::ESHandle< SiPixelDynamicInefficiency >	SiPixelDynamicInefficiency_

edm::ESHandle< SiPixelLorentzAngle >	SiPixelLorentzAngle_

const float	tanLorentzAnglePerTesla_BPix

const float	tanLorentzAnglePerTesla_FPix

const int	theAdcFullScale

const int	theAdcFullScaleStack

const float	theElectronPerADC

const float	theGainSmearing

const float	theNoiseInElectrons

const std::unique_ptr< GaussianTailNoiseGenerator >	theNoiser

const float	theOffsetSmearing

const float	theReadoutNoise

const std::unique_ptr< SiPixelGainCalibrationOfflineSimService >	theSiPixelGainCalibrationService_

const float	theThresholdInE_BPix

const float	theThresholdInE_BPix_L1

const float	theThresholdInE_BPix_L2

const float	theThresholdInE_FPix

const double	theThresholdSmearing_BPix

const double	theThresholdSmearing_BPix_L1

const double	theThresholdSmearing_BPix_L2

const double	theThresholdSmearing_FPix

const float	theTofLowerCut

const float	theTofUpperCut

const double	tMax

const bool	use_deadmodule_DB_

const bool	use_ineff_from_db_

const bool	use_LorentzAngle_DB_

const bool	use_module_killing_

Detailed Description

Definition at line 44 of file SiPixelDigitizerAlgorithm.h.

Member Typedef Documentation

typedef GloballyPositioned<double> SiPixelDigitizerAlgorithm::Frame

private

Definition at line 276 of file SiPixelDigitizerAlgorithm.h.

typedef std::vector<edm::ParameterSet> SiPixelDigitizerAlgorithm::Parameters

private

Definition at line 277 of file SiPixelDigitizerAlgorithm.h.

typedef signal_map_type::const_iterator SiPixelDigitizerAlgorithm::signal_map_const_iterator

private

Definition at line 274 of file SiPixelDigitizerAlgorithm.h.

typedef signal_map_type::iterator SiPixelDigitizerAlgorithm::signal_map_iterator

private

Definition at line 273 of file SiPixelDigitizerAlgorithm.h.

typedef std::map<int, Amplitude, std::less<int> > SiPixelDigitizerAlgorithm::signal_map_type

private

Definition at line 272 of file SiPixelDigitizerAlgorithm.h.

typedef std::map<uint32_t, signal_map_type> SiPixelDigitizerAlgorithm::signalMaps

private

Definition at line 275 of file SiPixelDigitizerAlgorithm.h.

Constructor & Destructor Documentation

SiPixelDigitizerAlgorithm::SiPixelDigitizerAlgorithm ( const edm::ParameterSet & conf )

Definition at line 127 of file SiPixelDigitizerAlgorithm.cc.

References AddPixelInefficiency, theAdcFullScale, theElectronPerADC, theThresholdInE_BPix, theThresholdInE_BPix_L1, theThresholdInE_BPix_L2, theThresholdInE_FPix, and tMax.

                                                                                 :
 
   _signal(),
   makeDigiSimLinks_(conf.getUntrackedParameter<bool>("makeDigiSimLinks", true)),
   use_ineff_from_db_(conf.getParameter<bool>("useDB")),
   use_module_killing_(conf.getParameter<bool>("killModules")), // boolean to kill or not modules
   use_deadmodule_DB_(conf.getParameter<bool>("DeadModules_DB")), // boolean to access dead modules from DB
   use_LorentzAngle_DB_(conf.getParameter<bool>("LorentzAngle_DB")), // boolean to access Lorentz angle from DB
 
   DeadModules(use_deadmodule_DB_ ? Parameters() : conf.getParameter<Parameters>("DeadModules")), // get dead module from cfg file
 
   // Common pixel parameters
   // These are parameters which are not likely to be changed
   GeVperElectron(3.61E-09), // 1 electron(3.61eV, 1keV(277e, mod 9/06 d.k.
   Sigma0(0.00037),           // Charge diffusion constant 7->3.7
   Dist300(0.0300),          //   normalized to 300micron Silicon
   alpha2Order(conf.getParameter<bool>("Alpha2Order")),   // switch on/off of E.B effect
   ClusterWidth(3.),     // Charge integration spread on the collection plane
 
   // get external parameters:
   // To account for upgrade geometries do not assume the number 
   // of layers or disks.
   NumberOfBarrelLayers(conf.exists("NumPixelBarrel")?conf.getParameter<int>("NumPixelBarrel"):3),
   NumberOfEndcapDisks(conf.exists("NumPixelEndcap")?conf.getParameter<int>("NumPixelEndcap"):2),
 
   // ADC calibration 1adc count(135e.
   // Corresponds to 2adc/kev, 270[e/kev]/135[e/adc](2[adc/kev]
   // Be carefull, this parameter is also used in SiPixelDet.cc to
   // calculate the noise in adc counts from noise in electrons.
   // Both defaults should be the same.
   theElectronPerADC(conf.getParameter<double>("ElectronPerAdc")),
 
   // ADC saturation value, 255(8bit adc.
   //theAdcFullScale(conf.getUntrackedParameter<int>("AdcFullScale",255)),
   theAdcFullScale(conf.getParameter<int>("AdcFullScale")),
   theAdcFullScaleStack(conf.exists("AdcFullScaleStack")?conf.getParameter<int>("AdcFullScaleStack"):255),
 
   // Noise in electrons:
   // Pixel cell noise, relevant for generating noisy pixels
   theNoiseInElectrons(conf.getParameter<double>("NoiseInElectrons")),
 
   // Fill readout noise, including all readout chain, relevant for smearing
   //theReadoutNoise(conf.getUntrackedParameter<double>("ReadoutNoiseInElec",500.)),
   theReadoutNoise(conf.getParameter<double>("ReadoutNoiseInElec")),
 
   // Pixel threshold in units of noise:
   // thePixelThreshold(conf.getParameter<double>("ThresholdInNoiseUnits")),
   // Pixel threshold in electron units.
   theThresholdInE_FPix(conf.getParameter<double>("ThresholdInElectrons_FPix")),
   theThresholdInE_BPix(conf.getParameter<double>("ThresholdInElectrons_BPix")),
   theThresholdInE_BPix_L1(conf.exists("ThresholdInElectrons_BPix_L1")?conf.getParameter<double>("ThresholdInElectrons_BPix_L1"):theThresholdInE_BPix),
   theThresholdInE_BPix_L2(conf.exists("ThresholdInElectrons_BPix_L2")?conf.getParameter<double>("ThresholdInElectrons_BPix_L2"):theThresholdInE_BPix),
 
   // Add threshold gaussian smearing:
   theThresholdSmearing_FPix(conf.getParameter<double>("ThresholdSmearing_FPix")),
   theThresholdSmearing_BPix(conf.getParameter<double>("ThresholdSmearing_BPix")),
   theThresholdSmearing_BPix_L1(conf.exists("ThresholdSmearing_BPix_L1")?conf.getParameter<double>("ThresholdSmearing_BPix_L1"):theThresholdSmearing_BPix),
   theThresholdSmearing_BPix_L2(conf.exists("ThresholdSmearing_BPix_L2")?conf.getParameter<double>("ThresholdSmearing_BPix_L2"):theThresholdSmearing_BPix),
 
   // electrons to VCAL conversion needed in misscalibrate()
   electronsPerVCAL(conf.getParameter<double>("ElectronsPerVcal")),
   electronsPerVCAL_Offset(conf.getParameter<double>("ElectronsPerVcal_Offset")),
   electronsPerVCAL_L1(conf.exists("ElectronsPerVcal_L1")?conf.getParameter<double>("ElectronsPerVcal_L1"):electronsPerVCAL),
   electronsPerVCAL_L1_Offset(conf.exists("ElectronsPerVcal_L1_Offset")?conf.getParameter<double>("ElectronsPerVcal_L1_Offset"):electronsPerVCAL_Offset),
 
   //theTofCut 12.5, cut in particle TOD +/- 12.5ns
   //theTofCut(conf.getUntrackedParameter<double>("TofCut",12.5)),
   theTofLowerCut(conf.getParameter<double>("TofLowerCut")),
   theTofUpperCut(conf.getParameter<double>("TofUpperCut")),
 
   // Get the Lorentz angle from the cfg file:
   tanLorentzAnglePerTesla_FPix(use_LorentzAngle_DB_ ? 0.0 : conf.getParameter<double>("TanLorentzAnglePerTesla_FPix")),
   tanLorentzAnglePerTesla_BPix(use_LorentzAngle_DB_ ? 0.0 : conf.getParameter<double>("TanLorentzAnglePerTesla_BPix")),
 
   // signal response new parameterization: split Fpix and BPix
   FPix_p0(conf.getParameter<double>("FPix_SignalResponse_p0")),
   FPix_p1(conf.getParameter<double>("FPix_SignalResponse_p1")),
   FPix_p2(conf.getParameter<double>("FPix_SignalResponse_p2")),
   FPix_p3(conf.getParameter<double>("FPix_SignalResponse_p3")),
 
   BPix_p0(conf.getParameter<double>("BPix_SignalResponse_p0")),
   BPix_p1(conf.getParameter<double>("BPix_SignalResponse_p1")),
   BPix_p2(conf.getParameter<double>("BPix_SignalResponse_p2")),
   BPix_p3(conf.getParameter<double>("BPix_SignalResponse_p3")),
 
   // Add noise
   addNoise(conf.getParameter<bool>("AddNoise")),
 
   // Smear the pixel charge with a gaussian which RMS is a function of the
   // pixel charge (Danek's study)
   addChargeVCALSmearing(conf.getParameter<bool>("ChargeVCALSmearing")),
 
   // Add noisy pixels
   addNoisyPixels(conf.getParameter<bool>("AddNoisyPixels")),
 
   // Fluctuate charge in track subsegments
   fluctuateCharge(conf.getUntrackedParameter<bool>("FluctuateCharge",true)),
 
   // Control the pixel inefficiency
   AddPixelInefficiency(conf.getParameter<bool>("AddPixelInefficiency")),
 
   // Add threshold gaussian smearing:
   addThresholdSmearing(conf.getParameter<bool>("AddThresholdSmearing")),
 
   // Get the constants for the miss-calibration studies
   doMissCalibrate(conf.getParameter<bool>("MissCalibrate")), // Enable miss-calibration
   theGainSmearing(conf.getParameter<double>("GainSmearing")), // sigma of the gain smearing
   theOffsetSmearing(conf.getParameter<double>("OffsetSmearing")), //sigma of the offset smearing
 
   // Add pixel radiation damage for upgrade studies
   AddPixelAging(conf.getParameter<bool>("DoPixelAging")),
   
   // delta cutoff in MeV, has to be same as in OSCAR(0.030/cmsim=1.0 MeV
   //tMax(0.030), // In MeV.
   //tMax(conf.getUntrackedParameter<double>("deltaProductionCut",0.030)),
   tMax(conf.getParameter<double>("deltaProductionCut")),
 
   fluctuate(fluctuateCharge ? new SiG4UniversalFluctuation() : nullptr),
   theNoiser(addNoise ? new GaussianTailNoiseGenerator() : nullptr),
   calmap(doMissCalibrate ? initCal() : std::map<int,CalParameters,std::less<int> >()),
   theSiPixelGainCalibrationService_(use_ineff_from_db_ ? new SiPixelGainCalibrationOfflineSimService(conf) : nullptr),
   pixelEfficiencies_(conf, AddPixelInefficiency,NumberOfBarrelLayers,NumberOfEndcapDisks),
   pixelAging_(conf,AddPixelAging,NumberOfBarrelLayers,NumberOfEndcapDisks)
 {
   LogInfo ("PixelDigitizer ") <<"SiPixelDigitizerAlgorithm constructed"
                   <<"Configuration parameters:"
                   << "Threshold/Gain = "
                   << "threshold in electron FPix = "
                   << theThresholdInE_FPix
                   << "threshold in electron BPix = "
                   << theThresholdInE_BPix
                               << "threshold in electron BPix Layer1 = "
                               << theThresholdInE_BPix_L1
                               << "threshold in electron BPix Layer2 = "
                               << theThresholdInE_BPix_L2
                   <<" " << theElectronPerADC << " " << theAdcFullScale
                   << " The delta cut-off is set to " << tMax
                   << " pix-inefficiency "<<AddPixelInefficiency;
 
 }

SiPixelDigitizerAlgorithm::~SiPixelDigitizerAlgorithm ( )

Definition at line 361 of file SiPixelDigitizerAlgorithm.cc.

References LogDebug.

                                                       {
   LogDebug ("PixelDigitizer")<<"SiPixelDigitizerAlgorithm deleted";
 }

Member Function Documentation

void SiPixelDigitizerAlgorithm::accumulateSimHits	(	const std::vector< PSimHit >::const_iterator	inputBegin,
		const std::vector< PSimHit >::const_iterator	inputEnd,
		const size_t	inputBeginGlobalIndex,
		const unsigned int	tofBin,
		const PixelGeomDetUnit *	pixdet,
		const GlobalVector &	bfield,
		const TrackerTopology *	tTopo,
		CLHEP::HepRandomEngine *	engine
	)

Definition at line 593 of file SiPixelDigitizerAlgorithm.cc.

References drift(), GeomDet::geographicalId(), induce_signal(), LogDebug, mag(), primary_ionization(), DetId::rawId(), GeomDet::surface(), theTofLowerCut, theTofUpperCut, and Surface::toGlobal().

                                                                                 {
     // produce SignalPoint's for all SimHit's in detector
     // Loop over hits
 
     uint32_t detId = pixdet->geographicalId().rawId();
     size_t simHitGlobalIndex=inputBeginGlobalIndex; // This needs to stored to create the digi-sim link later
     for (std::vector<PSimHit>::const_iterator ssbegin = inputBegin; ssbegin != inputEnd; ++ssbegin, ++simHitGlobalIndex) {
       // skip hits not in this detector.
       if((*ssbegin).detUnitId() != detId) {
         continue;
       }
 
 #ifdef TP_DEBUG
       LogDebug ("Pixel Digitizer")
     << (*ssbegin).particleType() << " " << (*ssbegin).pabs() << " "
     << (*ssbegin).energyLoss() << " " << (*ssbegin).tof() << " "
     << (*ssbegin).trackId() << " " << (*ssbegin).processType() << " "
     << (*ssbegin).detUnitId()
     << (*ssbegin).entryPoint() << " " << (*ssbegin).exitPoint() ;
 #endif
 
       
       std::vector<EnergyDepositUnit> ionization_points;
       std::vector<SignalPoint> collection_points;
 
       // fill collection_points for this SimHit, indpendent of topology
       // Check the TOF cut
       if (  ((*ssbegin).tof() - pixdet->surface().toGlobal((*ssbegin).localPosition()).mag()/30.)>= theTofLowerCut &&
         ((*ssbegin).tof()- pixdet->surface().toGlobal((*ssbegin).localPosition()).mag()/30.) <= theTofUpperCut ) {
     primary_ionization(*ssbegin, ionization_points, engine); // fills _ionization_points
     drift(*ssbegin, pixdet, bfield, tTopo, ionization_points, collection_points);  // transforms _ionization_points to collection_points
     // compute induced signal on readout elements and add to _signal
     induce_signal(*ssbegin, simHitGlobalIndex, tofBin, pixdet, collection_points); // 1st 3 args needed only for SimHit<-->Digi link
       } //  end if
     } // end for
 
 }

void SiPixelDigitizerAlgorithm::add_noise	(	const PixelGeomDetUnit *	pixdet,
		float	thePixelThreshold,
		CLHEP::HepRandomEngine *	engine
	)

private

Definition at line 1362 of file SiPixelDigitizerAlgorithm.cc.

References _signal, addChargeVCALSmearing, addNoisyPixels, officialStyle::chan, GeomDet::geographicalId(), mps_fire::i, createfilelist::int, LogDebug, PixelTopology::ncolumns(), PixelTopology::nrows(), PixelDigi::pixelToChannel(), DetId::rawId(), PixelGeomDetUnit::specificTopology(), theNoiseInElectrons, theNoiser, theReadoutNoise, theThresholdInE_BPix, and theThresholdInE_FPix.

Referenced by digitize().

                                                                         {
 
 #ifdef TP_DEBUG
   LogDebug ("Pixel Digitizer") << " enter add_noise " << theNoiseInElectrons;
 #endif
 
   uint32_t detID= pixdet->geographicalId().rawId();
   signal_map_type& theSignal = _signal[detID];
 
 
   // First add noise to hit pixels
   float theSmearedChargeRMS = 0.0;
 
   for ( signal_map_iterator i = theSignal.begin(); i != theSignal.end(); i++) {
 
          if(addChargeVCALSmearing)
       {
     if((*i).second < 3000)
       {
         theSmearedChargeRMS = 543.6 - (*i).second * 0.093;
       } else if((*i).second < 6000){
         theSmearedChargeRMS = 307.6 - (*i).second * 0.01;
       } else{
         theSmearedChargeRMS = -432.4 +(*i).second * 0.123;
     }
 
     // Noise from Vcal smearing:
         float noise_ChargeVCALSmearing = theSmearedChargeRMS * CLHEP::RandGaussQ::shoot(engine, 0., 1.);
     // Noise from full readout:
         float noise  = CLHEP::RandGaussQ::shoot(engine, 0., theReadoutNoise);
 
         if(((*i).second + Amplitude(noise+noise_ChargeVCALSmearing, -1.)) < 0. ) {
           (*i).second.set(0);}
         else{
     (*i).second +=Amplitude(noise+noise_ChargeVCALSmearing, -1.);
         }
 
       } // End if addChargeVCalSmearing
      else
      {
     // Noise: ONLY full READOUT Noise.
     // Use here the FULL readout noise, including TBM,ALT,AOH,OPT-REC.
     float noise = CLHEP::RandGaussQ::shoot(engine, 0., theReadoutNoise);
 
         if(((*i).second + Amplitude(noise, -1.)) < 0. ) {
           (*i).second.set(0);}
         else{
     (*i).second +=Amplitude(noise, -1.);
         }
      } // end if only Noise from full readout
 
   }
 
   if(!addNoisyPixels)  // Option to skip noise in non-hit pixels
     return;
 
   const PixelTopology* topol=&pixdet->specificTopology();
   int numColumns = topol->ncolumns();  // det module number of cols&rows
   int numRows = topol->nrows();
 
   // Add noise on non-hit pixels
   // Use here the pixel noise
   int numberOfPixels = (numRows * numColumns);
   std::map<int,float, std::less<int> > otherPixels;
   std::map<int,float, std::less<int> >::iterator mapI;
 
   theNoiser->generate(numberOfPixels,
                       thePixelThreshold, //thr. in un. of nois
               theNoiseInElectrons, // noise in elec.
                       otherPixels,
                       engine );
 
 #ifdef TP_DEBUG
   LogDebug ("Pixel Digitizer")
     <<  " Add noisy pixels " << numRows << " "
     << numColumns << " " << theNoiseInElectrons << " "
     << theThresholdInE_FPix << theThresholdInE_BPix <<" "<< numberOfPixels<<" "
     << otherPixels.size() ;
 #endif
 
   // Add noisy pixels
   for (mapI = otherPixels.begin(); mapI!= otherPixels.end(); mapI++) {
     int iy = ((*mapI).first) / numRows;
     int ix = ((*mapI).first) - (iy*numRows);
 
     // Keep for a while for testing.
     if( iy < 0 || iy > (numColumns-1) )
       LogWarning ("Pixel Geometry") << " error in iy " << iy ;
     if( ix < 0 || ix > (numRows-1) )
       LogWarning ("Pixel Geometry")  << " error in ix " << ix ;
 
     int chan = PixelDigi::pixelToChannel(ix, iy);
 
 #ifdef TP_DEBUG
     LogDebug ("Pixel Digitizer")
       <<" Storing noise = " << (*mapI).first << " " << (*mapI).second
       << " " << ix << " " << iy << " " << chan ;
 #endif
 
     if(theSignal[chan] == 0){
       //      float noise = float( (*mapI).second );
       int noise=int( (*mapI).second );
       theSignal[chan] = Amplitude (noise, -1.);
     }
   }
 }

double SiPixelDigitizerAlgorithm::calcQ ( float x ) const

inlineprivate

Definition at line 433 of file SiPixelDigitizerAlgorithm.h.

References f, min(), mathSSE::sqrt(), and geometryCSVtoXML::xx.

Referenced by induce_signal().

                                 {
       // need erf(x/sqrt2)
       //float x2=0.5*x*x;
       //float a=0.147;
       //double erf=sqrt(1.0f-exp( -1.0f*x2*( (4/M_PI)+a*x2)/(1.0+a*x2)));
       //if (x<0.) erf*=-1.0;
       //return 0.5*(1.0-erf);
 
       auto xx=std::min(0.5f*x*x,12.5f);
       return 0.5*(1.0-std::copysign(std::sqrt(1.f- unsafe_expf<4>(-xx*(1.f+0.2733f/(1.f+0.147f*xx)) )),x));
     }

void SiPixelDigitizerAlgorithm::calculateInstlumiFactor ( PileupMixingContent * puInfo )

Definition at line 639 of file SiPixelDigitizerAlgorithm.cc.

References PileupMixingContent::getMix_bunchCrossing(), PileupMixingContent::getMix_TrueInteractions(), mps_fire::i, gen::n, AlCaHLTBitMon_ParallelJobs::p, pixelEfficiencies_, muons2muons_cfi::pu, SiPixelDigitizerAlgorithm::PixelEfficiencies::pu_scale, SiPixelDigitizerAlgorithm::PixelEfficiencies::theInstLumiScaleFactor, and SiPixelDigitizerAlgorithm::PixelEfficiencies::thePUEfficiency.

                                                                                   {
   //Instlumi scalefactor calculating for dynamic inefficiency
 
   if (puInfo) {
     const std::vector<int>& bunchCrossing = puInfo->getMix_bunchCrossing();
     const std::vector<float>& TrueInteractionList = puInfo->getMix_TrueInteractions();      
     //const int bunchSpacing = puInfo->getMix_bunchSpacing();
 
     int pui = 0, p = 0;
     std::vector<int>::const_iterator pu;
     std::vector<int>::const_iterator pu0 = bunchCrossing.end();
     
     for (pu=bunchCrossing.begin(); pu!=bunchCrossing.end(); ++pu) {
       if (*pu==0) {
     pu0 = pu;
     p = pui;
       }
       pui++;
     }
     if (pu0!=bunchCrossing.end()) {
       for (size_t i=0, n = pixelEfficiencies_.thePUEfficiency.size(); i<n; i++) {
     double instlumi = TrueInteractionList.at(p)*pixelEfficiencies_.theInstLumiScaleFactor;
     double instlumi_pow=1.;
     pixelEfficiencies_.pu_scale[i] = 0;
     for  (size_t j=0; j<pixelEfficiencies_.thePUEfficiency[i].size(); j++){
       pixelEfficiencies_.pu_scale[i]+=instlumi_pow*pixelEfficiencies_.thePUEfficiency[i][j];
       instlumi_pow*=instlumi;
     }
       }
     }
   } 
   else {
     for (int i=0, n = pixelEfficiencies_.thePUEfficiency.size(); i<n; i++) {
       pixelEfficiencies_.pu_scale[i] = 1.;
     }
   }
 }

void SiPixelDigitizerAlgorithm::digitize	(	const PixelGeomDetUnit *	pixdet,
		std::vector< PixelDigi > &	digis,
		std::vector< PixelDigiSimLink > &	simlinks,
		const TrackerTopology *	tTopo,
		CLHEP::HepRandomEngine *	engine
	)

Definition at line 678 of file SiPixelDigitizerAlgorithm.cc.

References _signal, add_noise(), addNoise, AddPixelInefficiency, addThresholdSmearing, Surface::bounds(), Exception, GeomDet::geographicalId(), GeomDetType::isBarrel(), GeomDetType::isTrackerPixel(), TrackerTopology::layer(), LogDebug, make_digis(), module_killing_conf(), module_killing_DB(), PixelTopology::ncolumns(), PixelTopology::nrows(), GeomDetEnumerators::P1PXB, pixel_inefficiency(), pixel_inefficiency_db(), GeomDetEnumerators::PixelBarrel, pixelEfficiencies_, DetId::rawId(), GeomDet::specificSurface(), PixelGeomDetUnit::specificTopology(), GeomDet::subDetector(), theNoiseInElectrons, theThresholdInE_BPix, theThresholdInE_BPix_L1, theThresholdInE_BPix_L2, theThresholdInE_FPix, theThresholdSmearing_BPix, theThresholdSmearing_BPix_L1, theThresholdSmearing_BPix_L2, theThresholdSmearing_FPix, Bounds::thickness(), PixelGeomDetUnit::type(), use_deadmodule_DB_, use_ineff_from_db_, and use_module_killing_.

                                                                        {
   
   // Pixel Efficiency moved from the constructor to this method because
   // the information of the det are not available in the constructor
   // Efficiency parameters. 0 - no inefficiency, 1-low lumi, 10-high lumi
   
   uint32_t detID = pixdet->geographicalId().rawId();
   const signal_map_type& theSignal = _signal[detID];
   
   const PixelTopology* topol=&pixdet->specificTopology();
   int numColumns = topol->ncolumns();  // det module number of cols&rows
   int numRows = topol->nrows();
   
   // Noise already defined in electrons
   // thePixelThresholdInE = thePixelThreshold * theNoiseInElectrons ;
   // Find the threshold in noise units, needed for the noiser.
   
 
   float thePixelThresholdInE = 0.;
   
   if(theNoiseInElectrons>0.){
     if(pixdet->type().isTrackerPixel() && pixdet->type().isBarrel()){ // Barrel modules
       int lay = tTopo->layer(detID);
       if(addThresholdSmearing) {
     if(pixdet->subDetector()==GeomDetEnumerators::SubDetector::PixelBarrel || pixdet->subDetector()==GeomDetEnumerators::SubDetector::P1PXB) {
       if (lay==1) {
         thePixelThresholdInE = CLHEP::RandGaussQ::shoot(engine, theThresholdInE_BPix_L1, theThresholdSmearing_BPix_L1); // gaussian smearing
       } else if (lay==2) {
         thePixelThresholdInE = CLHEP::RandGaussQ::shoot(engine, theThresholdInE_BPix_L2, theThresholdSmearing_BPix_L2); // gaussian smearing
       } else {
         thePixelThresholdInE = CLHEP::RandGaussQ::shoot(engine, theThresholdInE_BPix , theThresholdSmearing_BPix); // gaussian smearing
       }
     }
       } else {
     if(pixdet->subDetector()==GeomDetEnumerators::SubDetector::PixelBarrel || pixdet->subDetector()==GeomDetEnumerators::SubDetector::P1PXB) {
       if (lay==1) {
         thePixelThresholdInE = theThresholdInE_BPix_L1;
       } else if (lay==2) {
         thePixelThresholdInE = theThresholdInE_BPix_L2;
       } else {
         thePixelThresholdInE = theThresholdInE_BPix; // no smearing
       }
     }
       }
     } else if(pixdet->type().isTrackerPixel()) { // Forward disks modules
       if(addThresholdSmearing) {
     thePixelThresholdInE = CLHEP::RandGaussQ::shoot(engine, theThresholdInE_FPix, theThresholdSmearing_FPix); // gaussian smearing
       } else {
     thePixelThresholdInE = theThresholdInE_FPix; // no smearing
       }
     }
     else {throw cms::Exception("NotAPixelGeomDetUnit") << "Not a pixel geomdet unit" << detID;}
   }
   
 
 #ifdef TP_DEBUG
   // full detector thickness
   float moduleThickness = pixdet->specificSurface().bounds().thickness();
   LogDebug ("PixelDigitizer")
     << " PixelDigitizer "
     << numColumns << " " << numRows << " " << moduleThickness;
 #endif
   
   if(addNoise) add_noise(pixdet, thePixelThresholdInE/theNoiseInElectrons, engine);  // generate noise
   
   // Do only if needed
   
   if((AddPixelInefficiency) && (!theSignal.empty()))
     pixel_inefficiency(pixelEfficiencies_, pixdet, tTopo, engine); // Kill some pixels
   
   if(use_ineff_from_db_ && (!theSignal.empty()))
     pixel_inefficiency_db(detID);
   
   if(use_module_killing_) {
     if (use_deadmodule_DB_) {  // remove dead modules using DB
       module_killing_DB(detID);
     } else { // remove dead modules using the list in cfg file
       module_killing_conf(detID);
     }
   }
   
   make_digis(thePixelThresholdInE, detID, pixdet, digis, simlinks, tTopo);
   
 #ifdef TP_DEBUG
   LogDebug ("PixelDigitizer") << "[SiPixelDigitizerAlgorithm] converted " << digis.size() << " PixelDigis in DetUnit" << detID;
 #endif
 }

void SiPixelDigitizerAlgorithm::drift	(	const PSimHit &	hit,
		const PixelGeomDetUnit *	pixdet,
		const GlobalVector &	bfield,
		const TrackerTopology *	tTopo,
		const std::vector< EnergyDepositUnit > &	ionization_points,
		std::vector< SignalPoint > &	collection_points
	)		const

private

Definition at line 900 of file SiPixelDigitizerAlgorithm.cc.

References AddPixelAging, alpha2Order, Surface::bounds(), PSimHit::detUnitId(), Dist300, DriftDirection(), JetChargeProducer_cfi::exp, mps_fire::i, LogDebug, pixel_aging(), pixelAging_, Sigma0, GeomDet::specificSurface(), mathSSE::sqrt(), Bounds::thickness(), PSimHit::tof(), PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

Referenced by accumulateSimHits().

                                                                                        {
   
 #ifdef TP_DEBUG
   LogDebug ("Pixel Digitizer") << " enter drift " ;
 #endif
   
   collection_points.resize(ionization_points.size()); // set size
   
   LocalVector driftDir=DriftDirection(pixdet, bfield, hit.detUnitId());  // get the charge drift direction
   if(driftDir.z() ==0.) {
     LogWarning("Magnetic field") << " pxlx: drift in z is zero ";
     return;
   }
   
   // tangent of Lorentz angle
   //float TanLorenzAngleX = driftDir.x()/driftDir.z();
   //float TanLorenzAngleY = 0.; // force to 0, driftDir.y()/driftDir.z();
   
   float TanLorenzAngleX, TanLorenzAngleY,dir_z, CosLorenzAngleX,
     CosLorenzAngleY;
   if( alpha2Order) {
     TanLorenzAngleX = driftDir.x(); // tangen of Lorentz angle
     TanLorenzAngleY = driftDir.y();
     dir_z = driftDir.z(); // The z drift direction
     CosLorenzAngleX = 1./sqrt(1.+TanLorenzAngleX*TanLorenzAngleX); //cosine
     CosLorenzAngleY = 1./sqrt(1.+TanLorenzAngleY*TanLorenzAngleY); //cosine;
     
   } else{ 
     TanLorenzAngleX = driftDir.x();
     TanLorenzAngleY = 0.; // force to 0, driftDir.y()/driftDir.z();
     dir_z = driftDir.z(); // The z drift direction
     CosLorenzAngleX = 1./sqrt(1.+TanLorenzAngleX*TanLorenzAngleX); //cosine to estimate the path length
     CosLorenzAngleY = 1.;
   }
   
   float moduleThickness = pixdet->specificSurface().bounds().thickness();
 #ifdef TP_DEBUG
   LogDebug ("Pixel Digitizer")
     << " Lorentz Tan " << TanLorenzAngleX << " " << TanLorenzAngleY <<" "
     << CosLorenzAngleX << " " << CosLorenzAngleY << " "
     << moduleThickness*TanLorenzAngleX << " " << driftDir;
 #endif
   
   float Sigma_x = 1.;  // Charge spread
   float Sigma_y = 1.;
   float DriftDistance; // Distance between charge generation and collection
   float DriftLength;   // Actual Drift Lentgh
   float Sigma;
   
   for (unsigned int i = 0; i != ionization_points.size(); i++) {
     
     float SegX, SegY, SegZ; // position
     SegX = ionization_points[i].x();
     SegY = ionization_points[i].y();
     SegZ = ionization_points[i].z();
     
     // Distance from the collection plane
     //DriftDistance = (moduleThickness/2. + SegZ); // Drift to -z
     // Include explixitely the E drift direction (for CMS dir_z=-1)
     DriftDistance = moduleThickness/2. - (dir_z * SegZ); // Drift to -z
     
     //if( DriftDistance <= 0.)
     //cout<<" <=0 "<<DriftDistance<<" "<<i<<" "<<SegZ<<" "<<dir_z<<" "
     //  <<SegX<<" "<<SegY<<" "<<(moduleThickness/2)<<" "
     //  <<ionization_points[i].energy()<<" "
     //  <<hit.particleType()<<" "<<hit.pabs()<<" "<<hit.energyLoss()<<" "
     //  <<hit.entryPoint()<<" "<<hit.exitPoint()
     //  <<std::endl;
     
     if( DriftDistance < 0.) {
       DriftDistance = 0.;
     } else if( DriftDistance > moduleThickness )
       DriftDistance = moduleThickness;
     
     // Assume full depletion now, partial depletion will come later.
     float XDriftDueToMagField = DriftDistance * TanLorenzAngleX;
     float YDriftDueToMagField = DriftDistance * TanLorenzAngleY;
     
     // Shift cloud center
     float CloudCenterX = SegX + XDriftDueToMagField;
     float CloudCenterY = SegY + YDriftDueToMagField;
     
     // Calculate how long is the charge drift path
     DriftLength = sqrt( DriftDistance*DriftDistance +
                         XDriftDueToMagField*XDriftDueToMagField +
                         YDriftDueToMagField*YDriftDueToMagField );
     
     // What is the charge diffusion after this path
     Sigma = sqrt(DriftLength/Dist300) * Sigma0;
     
     // Project the diffusion sigma on the collection plane
     Sigma_x = Sigma / CosLorenzAngleX ;
     Sigma_y = Sigma / CosLorenzAngleY ;
     
     // Insert a charge loss due to Rad Damage here
     float energyOnCollector = ionization_points[i].energy(); // The energy that reaches the collector
     
     // add pixel aging 
     if (AddPixelAging) {
       float kValue = pixel_aging(pixelAging_,pixdet,tTopo);
       energyOnCollector *= exp( -1*kValue*DriftDistance/moduleThickness );
     }
     
 #ifdef TP_DEBUG
     LogDebug ("Pixel Digitizer")
       <<" Dift DistanceZ= "<<DriftDistance<<" module thickness= "<<moduleThickness
       <<" Start Energy= "<<ionization_points[i].energy()<<" Energy after loss= "<<energyOnCollector;
 #endif
     SignalPoint sp( CloudCenterX, CloudCenterY,
             Sigma_x, Sigma_y, hit.tof(), energyOnCollector );
     
     // Load the Charge distribution parameters
     collection_points[i] = (sp);
     
   } // loop over ionization points, i.
   
 } // end drift

LocalVector SiPixelDigitizerAlgorithm::DriftDirection	(	const PixelGeomDetUnit *	pixdet,
		const GlobalVector &	bfield,
		const DetId &	detId
	)		const

private

Definition at line 1765 of file SiPixelDigitizerAlgorithm.cc.

References alpha2Order, Exception, GeomDet::geographicalId(), SiPixelLorentzAngle::getLorentzAngle(), GeomDetType::isBarrel(), GeomDetType::isTrackerPixel(), LogDebug, GloballyPositioned< T >::position(), DetId::rawId(), GloballyPositioned< T >::rotation(), Scenarios_cff::scale, SiPixelLorentzAngle_, GeomDet::surface(), tanLorentzAnglePerTesla_BPix, tanLorentzAnglePerTesla_FPix, PixelGeomDetUnit::type(), and use_LorentzAngle_DB_.

Referenced by drift().

                                                                                 {
   Frame detFrame(pixdet->surface().position(),pixdet->surface().rotation());
   LocalVector Bfield=detFrame.toLocal(bfield);
   
   float alpha2_FPix;
   float alpha2_BPix;
   float alpha2;
   
   //float dir_x = -tanLorentzAnglePerTesla * Bfield.y();
   //float dir_y = +tanLorentzAnglePerTesla * Bfield.x();
   //float dir_z = -1.; // E field always in z direction, so electrons go to -z
   // The dir_z has to be +/- 1. !
   // LocalVector theDriftDirection = LocalVector(dir_x,dir_y,dir_z);
 
   float dir_x = 0.0;
   float dir_y = 0.0;
   float dir_z = 0.0;
   float scale = 0.0;
 
   uint32_t detID= pixdet->geographicalId().rawId();
 
 
   // Read Lorentz angle from cfg file:**************************************************************
 
   if(!use_LorentzAngle_DB_){
     
     if( alpha2Order) {
       alpha2_FPix = tanLorentzAnglePerTesla_FPix*tanLorentzAnglePerTesla_FPix;
       alpha2_BPix = tanLorentzAnglePerTesla_BPix*tanLorentzAnglePerTesla_BPix;
     }else {
       alpha2_FPix = 0.0;
       alpha2_BPix = 0.0;
     }
     
     if(pixdet->type().isTrackerPixel() && pixdet->type().isBarrel()){// barrel layers
       dir_x = -( tanLorentzAnglePerTesla_BPix * Bfield.y() + alpha2_BPix* Bfield.z()* Bfield.x() );
       dir_y = +( tanLorentzAnglePerTesla_BPix * Bfield.x() - alpha2_BPix* Bfield.z()* Bfield.y() );
       dir_z = -(1 + alpha2_BPix* Bfield.z()*Bfield.z() );
       scale = -dir_z;
     } else if (pixdet->type().isTrackerPixel()) {// forward disks
       dir_x = -( tanLorentzAnglePerTesla_FPix * Bfield.y() + alpha2_FPix* Bfield.z()* Bfield.x() );
       dir_y = +( tanLorentzAnglePerTesla_FPix * Bfield.x() - alpha2_FPix* Bfield.z()* Bfield.y() );
       dir_z = -(1 + alpha2_FPix* Bfield.z()*Bfield.z() );
       scale = -dir_z;
     } else {
       throw cms::Exception("NotAPixelGeomDetUnit") << "Not a pixel geomdet unit" << detID;
     }
   } // end: Read LA from cfg file.
   
   //Read Lorentz angle from DB:********************************************************************
   if(use_LorentzAngle_DB_){
     float lorentzAngle = SiPixelLorentzAngle_->getLorentzAngle(detId);
     alpha2 = lorentzAngle * lorentzAngle;
     //std::cout << "detID is: "<< it->first <<"The LA per tesla is: "<< it->second << std::std::endl;
     dir_x = -( lorentzAngle * Bfield.y() + alpha2 * Bfield.z()* Bfield.x() );
     dir_y = +( lorentzAngle * Bfield.x() - alpha2 * Bfield.z()* Bfield.y() );
     dir_z = -(1 + alpha2 * Bfield.z()*Bfield.z() );
     scale = -dir_z;
   }// end: Read LA from DataBase.
   
   LocalVector theDriftDirection = LocalVector(dir_x/scale, dir_y/scale, dir_z/scale );
   
 #ifdef TP_DEBUG
   LogDebug ("Pixel Digitizer") << " The drift direction in local coordinate is "
                    << theDriftDirection ;
 #endif
   
   return theDriftDirection;
 }

void SiPixelDigitizerAlgorithm::fluctuateEloss	(	int	particleId,
		float	momentum,
		float	eloss,
		float	length,
		int	NumberOfSegments,
		float	elossVector[],
		CLHEP::HepRandomEngine *	engine
	)		const

private

Definition at line 845 of file SiPixelDigitizerAlgorithm.cc.

References funct::abs(), fluctuate, mps_fire::i, cuy::ii, particleFlowDisplacedVertex_cfi::ratio, and tMax.

Referenced by primary_ionization().

                                                                                    {
   
   // Get dedx for this track
   //float dedx;
   //if( length > 0.) dedx = eloss/length;
   //else dedx = eloss;
   
   double particleMass = 139.6; // Mass in MeV, Assume pion
   pid = std::abs(pid);
   if(pid!=211) {       // Mass in MeV
     if(pid==11)        particleMass = 0.511;
     else if(pid==13)   particleMass = 105.7;
     else if(pid==321)  particleMass = 493.7;
     else if(pid==2212) particleMass = 938.3;
   }
   // What is the track segment length.
   float segmentLength = length/NumberOfSegs;
   
   // Generate charge fluctuations.
   float de=0.;
   float sum=0.;
   double segmentEloss = (1000.*eloss)/NumberOfSegs; //eloss in MeV
   for (int i=0;i<NumberOfSegs;i++) {
     //       material,*,   momentum,energy,*, *,  mass
     //myglandz_(14.,segmentLength,2.,2.,dedx,de,0.14);
     // The G4 routine needs momentum in MeV, mass in Mev, delta-cut in MeV,
     // track segment length in mm, segment eloss in MeV
     // Returns fluctuated eloss in MeV
     double deltaCutoff = tMax; // the cutoff is sometimes redefined inside, so fix it.
     de = fluctuate->SampleFluctuations(double(particleMomentum*1000.),
                        particleMass, deltaCutoff,
                        double(segmentLength*10.),
                                        segmentEloss, engine )/1000.; //convert to GeV 
     elossVector[i]=de;
     sum +=de;
   }
   
   if(sum>0.) {  // If fluctuations give eloss>0.
     // Rescale to the same total eloss
     float ratio = eloss/sum;
     
     for (int ii=0;ii<NumberOfSegs;ii++) elossVector[ii]= ratio*elossVector[ii];
   } else {  // If fluctuations gives 0 eloss
     float averageEloss = eloss/NumberOfSegs;
     for (int ii=0;ii<NumberOfSegs;ii++) elossVector[ii]= averageEloss;
   }
   return;
 }

void SiPixelDigitizerAlgorithm::induce_signal	(	const PSimHit &	hit,
		const size_t	hitIndex,
		const unsigned int	tofBin,
		const PixelGeomDetUnit *	pixdet,
		const std::vector< SignalPoint > &	collection_points
	)

private

Definition at line 1025 of file SiPixelDigitizerAlgorithm.cc.

References _signal, calcQ(), officialStyle::chan, Topology::channel(), PixelDigi::channelToPixel(), ClusterWidth, GeomDet::geographicalId(), mps_fire::i, createfilelist::int, Topology::localPosition(), LogDebug, makeDigiSimLinks_, Topology::measurementPosition(), PixelTopology::ncolumns(), PixelTopology::nrows(), PixelTopology::pitch(), PixelDigi::pixelToChannel(), DetId::rawId(), gun_cff::SigmaX, gun_cff::SigmaY, PixelGeomDetUnit::specificTopology(), x, PV2DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::x(), y, PV2DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::y().

Referenced by accumulateSimHits().

                                                                                                {
 
   // X  - Rows, Left-Right, 160, (1.6cm)   for barrel
   // Y  - Columns, Down-Up, 416, (6.4cm)
 
    const PixelTopology* topol=&pixdet->specificTopology();
    uint32_t detID= pixdet->geographicalId().rawId();
    signal_map_type& theSignal = _signal[detID];
 
 #ifdef TP_DEBUG
     LogDebug ("Pixel Digitizer")
       << " enter induce_signal, "
       << topol->pitch().first << " " << topol->pitch().second; //OK
 #endif
 
    // local map to store pixels hit by 1 Hit.
    typedef std::map< int, float, std::less<int> > hit_map_type;
    hit_map_type hit_signal;
 
    // map to store pixel integrals in the x and in the y directions
    std::map<int, float, std::less<int> > x,y;
 
    // Assign signals to readout channels and store sorted by channel number
 
    // Iterate over collection points on the collection plane
    for ( std::vector<SignalPoint>::const_iterator i=collection_points.begin();
      i != collection_points.end(); ++i) {
 
      float CloudCenterX = i->position().x(); // Charge position in x
      float CloudCenterY = i->position().y(); //                 in y
      float SigmaX = i->sigma_x();            // Charge spread in x
      float SigmaY = i->sigma_y();            //               in y
      float Charge = i->amplitude();          // Charge amplitude
 
 
      //if(SigmaX==0 || SigmaY==0) {
      //cout<<SigmaX<<" "<<SigmaY
      //   << " cloud " << i->position().x() << " " << i->position().y() << " "
      //   << i->sigma_x() << " " << i->sigma_y() << " " << i->amplitude()<<std::endl;
      //}
 
 #ifdef TP_DEBUG
        LogDebug ("Pixel Digitizer")
      << " cloud " << i->position().x() << " " << i->position().y() << " "
      << i->sigma_x() << " " << i->sigma_y() << " " << i->amplitude();
 #endif
 
      // Find the maximum cloud spread in 2D plane , assume 3*sigma
      float CloudRight = CloudCenterX + ClusterWidth*SigmaX;
      float CloudLeft  = CloudCenterX - ClusterWidth*SigmaX;
      float CloudUp    = CloudCenterY + ClusterWidth*SigmaY;
      float CloudDown  = CloudCenterY - ClusterWidth*SigmaY;
 
      // Define 2D cloud limit points
      LocalPoint PointRightUp  = LocalPoint(CloudRight,CloudUp);
      LocalPoint PointLeftDown = LocalPoint(CloudLeft,CloudDown);
 
      // This points can be located outside the sensor area.
      // The conversion to measurement point does not check for that
      // so the returned pixel index might be wrong (outside range).
      // We rely on the limits check below to fix this.
      // But remember whatever we do here THE CHARGE OUTSIDE THE ACTIVE
      // PIXEL AREA IS LOST, it should not be collected.
 
      // Convert the 2D points to pixel indices
      MeasurementPoint mp = topol->measurementPosition(PointRightUp ); //OK
 
      int IPixRightUpX = int( floor( mp.x()));
      int IPixRightUpY = int( floor( mp.y()));
 
 #ifdef TP_DEBUG
      LogDebug ("Pixel Digitizer") << " right-up " << PointRightUp << " "
                   << mp.x() << " " << mp.y() << " "
                   << IPixRightUpX << " " << IPixRightUpY ;
 #endif
 
      mp = topol->measurementPosition(PointLeftDown ); //OK
 
      int IPixLeftDownX = int( floor( mp.x()));
      int IPixLeftDownY = int( floor( mp.y()));
 
 #ifdef TP_DEBUG
      LogDebug ("Pixel Digitizer") << " left-down " << PointLeftDown << " "
                   << mp.x() << " " << mp.y() << " "
                   << IPixLeftDownX << " " << IPixLeftDownY ;
 #endif
 
      // Check detector limits to correct for pixels outside range.
      int numColumns = topol->ncolumns();  // det module number of cols&rows
      int numRows = topol->nrows();
 
      IPixRightUpX = numRows>IPixRightUpX ? IPixRightUpX : numRows-1 ;
      IPixRightUpY = numColumns>IPixRightUpY ? IPixRightUpY : numColumns-1 ;
      IPixLeftDownX = 0<IPixLeftDownX ? IPixLeftDownX : 0 ;
      IPixLeftDownY = 0<IPixLeftDownY ? IPixLeftDownY : 0 ;
 
      x.clear(); // clear temporary integration array
      y.clear();
 
      // First integrate charge strips in x
      int ix; // TT for compatibility
      for (ix=IPixLeftDownX; ix<=IPixRightUpX; ix++) {  // loop over x index
        float xUB, xLB, UpperBound, LowerBound;
 
        // Why is set to 0 if ix=0, does it meen that we accept charge
        // outside the sensor? CHeck How it was done in ORCA?
        //if(ix == 0) LowerBound = 0.;
        if(ix == 0 || SigmaX==0. )  // skip for surface segemnts
      LowerBound = 0.;
        else {
      mp = MeasurementPoint( float(ix), 0.0);
      xLB = topol->localPosition(mp).x();
      LowerBound = 1-calcQ((xLB-CloudCenterX)/SigmaX);
        }
 
        if(ix == numRows-1 || SigmaX==0. )
      UpperBound = 1.;
        else {
      mp = MeasurementPoint( float(ix+1), 0.0);
      xUB = topol->localPosition(mp).x();
      UpperBound = 1. - calcQ((xUB-CloudCenterX)/SigmaX);
        }
 
        float   TotalIntegrationRange = UpperBound - LowerBound; // get strip
        x[ix] = TotalIntegrationRange; // save strip integral
        //if(SigmaX==0 || SigmaY==0)
        //cout<<TotalIntegrationRange<<" "<<ix<<std::endl;
 
      }
 
     // Now integrate strips in y
     int iy; // TT for compatibility
     for (iy=IPixLeftDownY; iy<=IPixRightUpY; iy++) { //loope over y ind
       float yUB, yLB, UpperBound, LowerBound;
 
       if(iy == 0 || SigmaY==0.)
     LowerBound = 0.;
       else {
         mp = MeasurementPoint( 0.0, float(iy) );
         yLB = topol->localPosition(mp).y();
     LowerBound = 1. - calcQ((yLB-CloudCenterY)/SigmaY);
       }
 
       if(iy == numColumns-1 || SigmaY==0. )
     UpperBound = 1.;
       else {
         mp = MeasurementPoint( 0.0, float(iy+1) );
         yUB = topol->localPosition(mp).y();
     UpperBound = 1. - calcQ((yUB-CloudCenterY)/SigmaY);
       }
 
       float   TotalIntegrationRange = UpperBound - LowerBound;
       y[iy] = TotalIntegrationRange; // save strip integral
       //if(SigmaX==0 || SigmaY==0)
       //cout<<TotalIntegrationRange<<" "<<iy<<std::endl;
     }
 
     // Get the 2D charge integrals by folding x and y strips
     int chan;
     for (ix=IPixLeftDownX; ix<=IPixRightUpX; ix++) {  // loop over x index
       for (iy=IPixLeftDownY; iy<=IPixRightUpY; iy++) { //loope over y ind
 
         float ChargeFraction = Charge*x[ix]*y[iy];
 
         if( ChargeFraction > 0. ) {
       chan = PixelDigi::pixelToChannel( ix, iy);  // Get index
           // Load the amplitude
           hit_signal[chan] += ChargeFraction;
     } // endif
 
 
     mp = MeasurementPoint( float(ix), float(iy) );
     LocalPoint lp = topol->localPosition(mp);
     chan = topol->channel(lp);
 
 #ifdef TP_DEBUG
     LogDebug ("Pixel Digitizer")
       << " pixel " << ix << " " << iy << " - "<<" "
       << chan << " " << ChargeFraction<<" "
       << mp.x() << " " << mp.y() <<" "
       << lp.x() << " " << lp.y() << " "  // givex edge position
       << chan; // edge belongs to previous ?
 #endif
 
       } // endfor iy
     } //endfor ix
 
 
     // Test conversions (THIS IS FOR TESTING ONLY) comment-out.
     //     mp = topol->measurementPosition( i->position() ); //OK
     //     LocalPoint lp = topol->localPosition(mp);     //OK
     //     std::pair<float,float> p = topol->pixel( i->position() );  //OK
     //     chan = PixelDigi::pixelToChannel( int(p.first), int(p.second));
     //     std::pair<int,int> ip = PixelDigi::channelToPixel(chan);
     //     MeasurementPoint mp1 = MeasurementPoint( float(ip.first),
     //                       float(ip.second) );
     //     LogDebug ("Pixel Digitizer") << " Test "<< mp.x() << " " << mp.y()
     //               << " "<< lp.x() << " " << lp.y() << " "<<" "
     //               <<p.first <<" "<<p.second<<" "<<chan<< " "
     //               <<" " << ip.first << " " << ip.second << " "
     //               << mp1.x() << " " << mp1.y() << " " //OK
     //               << topol->localPosition(mp1).x() << " "  //OK
     //               << topol->localPosition(mp1).y() << " "
     //               << topol->channel( i->position() ); //OK
 
 
   } // loop over charge distributions
 
   // Fill the global map with all hit pixels from this event
 
   for ( hit_map_type::const_iterator im = hit_signal.begin();
     im != hit_signal.end(); ++im) {
     int chan =  (*im).first;
     theSignal[chan] += (makeDigiSimLinks_ ? Amplitude( (*im).second, &hit, hitIndex, tofBin, (*im).second) : Amplitude( (*im).second, (*im).second) )  ;
 
 #ifdef TP_DEBUG
     std::pair<int,int> ip = PixelDigi::channelToPixel(chan);
     LogDebug ("Pixel Digitizer")
       << " pixel " << ip.first << " " << ip.second << " "
       << theSignal[chan];
 #endif
   }
 
 } // end induce_signal

void SiPixelDigitizerAlgorithm::init ( const edm::EventSetup & es )

Definition at line 109 of file SiPixelDigitizerAlgorithm.cc.

References edm::EventSetup::get(), and map_.

                                                             {
   if(use_ineff_from_db_){// load gain calibration service fromdb...
     theSiPixelGainCalibrationService_->setESObjects( es );
   }
   if(use_deadmodule_DB_) {
     es.get<SiPixelQualityRcd>().get(SiPixelBadModule_);
   }
   if(use_LorentzAngle_DB_) {
     // Get Lorentz angle from DB record
     es.get<SiPixelLorentzAngleSimRcd>().get(SiPixelLorentzAngle_);
   }
   //gets the map and geometry from the DB (to kill ROCs)
   es.get<SiPixelFedCablingMapRcd>().get(map_);
   es.get<TrackerDigiGeometryRecord>().get(geom_);
 }

void SiPixelDigitizerAlgorithm::init_DynIneffDB	(	const edm::EventSetup &	es,
		const unsigned int &	bunchspace
	)

Definition at line 490 of file SiPixelDigitizerAlgorithm.cc.

References AddPixelInefficiency, SiPixelDigitizerAlgorithm::PixelEfficiencies::FromConfig, geom_, edm::EventSetup::get(), SiPixelDigitizerAlgorithm::PixelEfficiencies::init_from_db(), pixelEfficiencies_, and SiPixelDynamicInefficiency_.

                                                                                                       {
   if (AddPixelInefficiency&&!pixelEfficiencies_.FromConfig) {
     if (bunchspace == 50) es.get<SiPixelDynamicInefficiencyRcd>().get("50ns",SiPixelDynamicInefficiency_);
     else es.get<SiPixelDynamicInefficiencyRcd>().get(SiPixelDynamicInefficiency_);
     pixelEfficiencies_.init_from_db(geom_, SiPixelDynamicInefficiency_);
   }
 }

std::map< int, SiPixelDigitizerAlgorithm::CalParameters, std::less< int > > SiPixelDigitizerAlgorithm::initCal ( ) const

private

Definition at line 269 of file SiPixelDigitizerAlgorithm.cc.

References calmap, MessageLogger_cfi::cerr, officialStyle::chan, PixelIndices::channelToPixelROC(), gather_cfg::cout, corrVsCorr::filename, mps_fire::i, recoMuon::in, create_public_lumi_plots::in_file, geometryCSVtoXML::line, LogDebug, dataset::name, AlCaHLTBitMon_ParallelJobs::p, SiPixelDigitizerAlgorithm::CalParameters::p0, SiPixelDigitizerAlgorithm::CalParameters::p1, SiPixelDigitizerAlgorithm::CalParameters::p2, SiPixelDigitizerAlgorithm::CalParameters::p3, RecoTauPiZeroBuilderPlugins_cfi::par0, RecoTauPiZeroBuilderPlugins_cfi::par1, PixelIndices::pixelToChannelROC(), and AlCaHLTBitMon_QueryRunRegistry::string.

                                          {
 
   using std::cerr;
   using std::cout;
   using std::endl;
 
   std::map<int, SiPixelDigitizerAlgorithm::CalParameters, std::less<int> > calmap;
   // Prepare for the analog amplitude miss-calibration
   LogDebug ("PixelDigitizer ")
     << " miss-calibrate the pixel amplitude ";
 
   const bool ReadCalParameters = false;
   if(ReadCalParameters) {   // Read the calibration files from file
     // read the calibration constants from a file (testing only)
     std::ifstream in_file;  // data file pointer
     char filename[80] = "phCalibrationFit_C0.dat";
 
     in_file.open(filename, std::ios::in ); // in C++
     if(in_file.bad()) {
       cout << " File not found " << endl;
       return calmap; // signal error
     }
     cout << " file opened : " << filename << endl;
 
     char line[500];
     for (int i = 0; i < 3; i++) {
       in_file.getline(line, 500,'\n');
       cout<<line<<endl;
     }
 
     cout << " test map" << endl;
 
     float par0,par1,par2,par3;
     int colid,rowid;
     std::string name;
     // Read MC tracks
     for(int i=0;i<(52*80);i++)  { // loop over tracks
       in_file >> par0 >> par1 >> par2 >> par3 >> name >> colid >> rowid;
       if(in_file.bad()) { // check for errors
         cerr << "Cannot read data file" << endl;
         return calmap;
       }
       if( in_file.eof() != 0 ) {
         cerr << in_file.eof() << " " << in_file.gcount() << " "
              << in_file.fail() << " " << in_file.good() << " end of file "
              << endl;
         return calmap;
       }
 
       //cout << " line " << i << " " <<par0<<" "<<par1<<" "<<par2<<" "<<par3<<" "
       //   <<colid<<" "<<rowid<<endl;
 
       CalParameters onePix;
       onePix.p0=par0;
       onePix.p1=par1;
       onePix.p2=par2;
       onePix.p3=par3;
 
       // Convert ROC pixel index to channel
       int chan = PixelIndices::pixelToChannelROC(rowid,colid);
       calmap.insert(std::pair<int,CalParameters>(chan,onePix));
 
       // Testing the index conversion, can be skipped
       std::pair<int,int> p = PixelIndices::channelToPixelROC(chan);
       if(rowid!=p.first) cout<<" wrong channel row "<<rowid<<" "<<p.first<<endl;
       if(colid!=p.second) cout<<" wrong channel col "<<colid<<" "<<p.second<<endl;
 
     } // pixel loop in a ROC
 
     cout << " map size  " << calmap.size() <<" max "<<calmap.max_size() << " "
          <<calmap.empty()<< endl;
 
 //     cout << " map size  " << calmap.size()  << endl;
 //     map<int,CalParameters,std::less<int> >::iterator ix,it;
 //     map<int,CalParameters,std::less<int> >::const_iterator ip;
 //     for (ix = calmap.begin(); ix != calmap.end(); ++ix) {
 //       int i = (*ix).first;
 //       std::pair<int,int> p = channelToPixelROC(i);
 //       it  = calmap.find(i);
 //       CalParameters y  = (*it).second;
 //       CalParameters z = (*ix).second;
 //       cout << i <<" "<<p.first<<" "<<p.second<<" "<<y.p0<<" "<<z.p0<<" "<<calmap[i].p0<<endl;
 
 //       //int dummy=0;
 //       //cin>>dummy;
 //     }
 
   } // end if readparameters
   return calmap;
 } // end initCal()

void SiPixelDigitizerAlgorithm::initializeEvent ( )

inline

Definition at line 52 of file SiPixelDigitizerAlgorithm.h.

                          {
     _signal.clear();
   }

void SiPixelDigitizerAlgorithm::make_digis	(	float	thePixelThresholdInE,
		uint32_t	detID,
		const PixelGeomDetUnit *	pixdet,
		std::vector< PixelDigi > &	digis,
		std::vector< PixelDigiSimLink > &	simlinks,
		const TrackerTopology *	tTopo
	)		const

private

Definition at line 1257 of file SiPixelDigitizerAlgorithm.cc.

References _signal, ecalMGPA::adc(), officialStyle::chan, PixelDigi::channelToPixel(), cuy::col, doMissCalibrate, f, runEdmFileComparison::found, dedxEstimators_cff::fraction, mps_fire::i, info(), createfilelist::int, LogDebug, makeDigiSimLinks_, min(), missCalibrate(), GeomDetEnumerators::P2OTB, mcMuonSeeds_cfi::SimTrack, GeomDet::subDetector(), theAdcFullScale, theAdcFullScaleStack, theElectronPerADC, theThresholdInE_BPix, theThresholdInE_BPix_L1, theThresholdInE_BPix_L2, and theThresholdInE_FPix.

Referenced by digitize().

                                                             {
 
 #ifdef TP_DEBUG
   LogDebug ("Pixel Digitizer") << " make digis "<<" "
                    << " pixel threshold FPix" << theThresholdInE_FPix << " "
                                << " pixel threshold BPix" << theThresholdInE_BPix << " "
                                << " pixel threshold BPix Layer1" << theThresholdInE_BPix_L1 << " "
                                << " pixel threshold BPix Layer2" << theThresholdInE_BPix_L2 << " "
                    << " List pixels passing threshold ";
 #endif
 
   // Loop over hit pixels
 
   signalMaps::const_iterator it = _signal.find(detID);
   if (it == _signal.end()) {
     return;
   }
 
   const signal_map_type& theSignal = (*it).second;
 
   // unsigned long is enough to store SimTrack id and EncodedEventId
   using TrackEventId = std::pair<decltype(SimTrack().trackId()), decltype(EncodedEventId().rawId())>;
   std::map<TrackEventId, float> simi; // re-used
 
   for (signal_map_const_iterator i = theSignal.begin(); i != theSignal.end(); ++i) {
 
     float signalInElectrons = (*i).second ;   // signal in electrons
 
     // Do the miss calibration for calibration studies only.
     //if(doMissCalibrate) signalInElectrons = missCalibrate(signalInElectrons)
 
     // Do only for pixels above threshold
 
     if( signalInElectrons >= thePixelThresholdInE) { // check threshold
 
       int chan =  (*i).first;  // channel number
       std::pair<int,int> ip = PixelDigi::channelToPixel(chan);
       int adc=0;  // ADC count as integer
 
       // Do the miss calibration for calibration studies only.
       if(doMissCalibrate) {
     int row = ip.first;  // X in row
     int col = ip.second; // Y is in col
     adc = int(missCalibrate(detID, tTopo, pixdet, col, row, signalInElectrons)); //full misscalib.
       } else { // Just do a simple electron->adc conversion
     adc = int( signalInElectrons / theElectronPerADC ); // calibrate gain
       }
       adc = std::min(adc, theAdcFullScale); // Check maximum value
 // Calculate layerIndex
      if (theAdcFullScale!=theAdcFullScaleStack){
        if(pixdet->subDetector() == GeomDetEnumerators::SubDetector::P2OTB) { // Phase 2 OT Barrel only
      // Set to 1 if over the threshold
      if (theAdcFullScaleStack==1) {adc=1;}
      // Make it a linear fit to the full scale of the normal adc count.   Start new adc from 1 not zero.
      if (theAdcFullScaleStack!=1&&theAdcFullScaleStack!=theAdcFullScale) {adc = int (1 + adc * (theAdcFullScaleStack-1)/float(theAdcFullScale) );}
        }
      } // Only enter this if the Adc changes for the outer layers
 #ifdef TP_DEBUG
       LogDebug ("Pixel Digitizer")
     << (*i).first << " " << (*i).second << " " << signalInElectrons
     << " " << adc << ip.first << " " << ip.second ;
 #endif
 
       // Load digis
       digis.emplace_back(ip.first, ip.second, adc);
 
       if (makeDigiSimLinks_ && !(*i).second.hitInfos().empty()) {
         //digilink
       unsigned int il=0;
           for(const auto& info: (*i).second.hitInfos()) {
             // note: according to C++ standard operator[] does
             // value-initializiation, which for float means initial value of 0
             simi[std::make_pair(info.trackId(), info.eventId().rawId())] += (*i).second.individualampl()[il];
             il++;
           }
 
       //sum the contribution of the same trackid
           for(const auto& info: (*i).second.hitInfos()) {
             // skip if track already processed
             auto found = simi.find(std::make_pair(info.trackId(), info.eventId().rawId()));
             if(found == simi.end())
               continue;
 
         float sum_samechannel = found->second;
         float fraction=sum_samechannel/(*i).second;
         if(fraction>1.f) fraction=1.f;
 
             // Approximation: pick hitIndex and tofBin only from the first SimHit
         simlinks.emplace_back((*i).first, info.trackId(), info.hitIndex(), info.tofBin(), info.eventId(), fraction);
             simi.erase(found);
       }
           simi.clear(); // although should be empty already
       }
     }
   }
 }

float SiPixelDigitizerAlgorithm::missCalibrate	(	uint32_t	detID,
		const TrackerTopology *	tTopo,
		const PixelGeomDetUnit *	pixdet,
		int	col,
		int	row,
		float	amp
	)		const

private

Definition at line 1680 of file SiPixelDigitizerAlgorithm.cc.

References BPix_p0, BPix_p1, BPix_p2, BPix_p3, electronsPerVCAL, electronsPerVCAL_L1, electronsPerVCAL_L1_Offset, electronsPerVCAL_Offset, Exception, FPix_p0, FPix_p1, FPix_p2, FPix_p3, GeomDetType::isBarrel(), GeomDetType::isTrackerPixel(), p1, p2, p3, TrackerTopology::pxbLayer(), DetId::subdetId(), and PixelGeomDetUnit::type().

Referenced by make_digis().

                                                       {
   // Central values
   //const float p0=0.00352, p1=0.868, p2=112., p3=113.; // pix(0,0,0)
   //  const float p0=0.00382, p1=0.886, p2=112.7, p3=113.0; // average roc=0
   //const float p0=0.00492, p1=1.998, p2=90.6, p3=134.1; // average roc=6
   // Smeared (rms)
   //const float s0=0.00020, s1=0.051, s2=5.4, s3=4.4; // average roc=0
   //const float s0=0.00015, s1=0.043, s2=3.2, s3=3.1; // col average roc=0
 
   // Make 2 sets of parameters for Fpix and BPIx:
 
   float p0=0.0;
   float p1=0.0;
   float p2=0.0;
   float p3=0.0;
 
   if(pixdet->type().isTrackerPixel() && pixdet->type().isBarrel()){// barrel layers
       p0 = BPix_p0;
       p1 = BPix_p1;
       p2 = BPix_p2;
       p3 = BPix_p3;
   } else if(pixdet->type().isTrackerPixel()) {// forward disks
       p0 = FPix_p0;
       p1 = FPix_p1;
       p2 = FPix_p2;
       p3 = FPix_p3;
   } else {
     throw cms::Exception("NotAPixelGeomDetUnit") << "Not a pixel geomdet unit" << detID;
   }
 
   float newAmp = 0.; //Modified signal
 
   // Convert electrons to VCAL units
   float signal = (signalInElectrons-electronsPerVCAL_Offset)/electronsPerVCAL;
 
   // New gains/offsets are needed for phase1 L1
   int layer = 0;
   if (DetId(detID).subdetId()==1) layer = tTopo->pxbLayer(detID);
   if (layer==1) signal = (signalInElectrons-electronsPerVCAL_L1_Offset)/electronsPerVCAL_L1;
 
   // Simulate the analog response with fixed parametrization
   newAmp = p3 + p2 * tanh(p0*signal - p1);
 
 
   // Use the pixel-by-pixel calibrations
   //transform to ROC index coordinates
   //int chipIndex=0, colROC=0, rowROC=0;
   //std::unique_ptr<PixelIndices> pIndexConverter(new PixelIndices(numColumns,numRows));
   //pIndexConverter->transformToROC(col,row,chipIndex,colROC,rowROC);
 
   // Use calibration from a file
   //int chanROC = PixelIndices::pixelToChannelROC(rowROC,colROC); // use ROC coordinates
   //float pp0=0, pp1=0,pp2=0,pp3=0;
   //map<int,CalParameters,std::less<int> >::const_iterator it=calmap.find(chanROC);
   //CalParameters y  = (*it).second;
   //pp0 = y.p0;
   //pp1 = y.p1;
   //pp2 = y.p2;
   //pp3 = y.p3;
 
   //
   // Use random smearing
   // Randomize the pixel response
   //float pp0  = RandGaussQ::shoot(p0,s0);
   //float pp1  = RandGaussQ::shoot(p1,s1);
   //float pp2  = RandGaussQ::shoot(p2,s2);
   //float pp3  = RandGaussQ::shoot(p3,s3);
 
   //newAmp = pp3 + pp2 * tanh(pp0*signal - pp1); // Final signal
 
   //cout<<" misscalibrate "<<col<<" "<<row<<" "<<chipIndex<<" "<<colROC<<" "
   //  <<rowROC<<" "<<signalInElectrons<<" "<<signal<<" "<<newAmp<<" "
   //  <<(signalInElectrons/theElectronPerADC)<<std::endl;
 
   return newAmp;
 }

void SiPixelDigitizerAlgorithm::module_killing_conf ( uint32_t detID )

private

Definition at line 1862 of file SiPixelDigitizerAlgorithm.cc.

References _signal, PixelDigi::channelToPixel(), DeadModules, mps_fire::i, and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by digitize().

                                                                   {
   
   bool isbad=false;
   
   Parameters::const_iterator itDeadModules=DeadModules.begin();
   
   int detid = detID;
   for(; itDeadModules != DeadModules.end(); ++itDeadModules){
     int Dead_detID = itDeadModules->getParameter<int>("Dead_detID");
     if(detid == Dead_detID){
       isbad=true;
       break;
     }
   }
   
   if(!isbad)
     return;
 
   signal_map_type& theSignal = _signal[detID];
   
   std::string Module = itDeadModules->getParameter<std::string>("Module");
   
   if(Module=="whole"){
     for(signal_map_iterator i = theSignal.begin();i != theSignal.end(); ++i) {
       i->second.set(0.); // reset amplitude
     }
   }
   
   for(signal_map_iterator i = theSignal.begin();i != theSignal.end(); ++i) {
     std::pair<int,int> ip = PixelDigi::channelToPixel(i->first);//get pixel pos
 
     if(Module=="tbmA" && ip.first>=80 && ip.first<=159){
       i->second.set(0.);
     }
 
     if( Module=="tbmB" && ip.first<=79){
       i->second.set(0.);
     }
   }
 }

void SiPixelDigitizerAlgorithm::module_killing_DB ( uint32_t detID )

private

Definition at line 1903 of file SiPixelDigitizerAlgorithm.cc.

References _signal, funct::abs(), PixelDigi::channelToPixel(), SiPixelQuality::disabledModuleType::errorType, SiPixelFedCablingMap::findItem(), SiPixelQuality::getBadComponentList(), mps_fire::i, triggerObjects_cff::id, sipixelobjects::PixelROC::idInDetUnit(), SiPixelQuality::IsRocBad(), DTRecHitQuality_cfi::local, map_, callgraph::path, SiPixelFedCablingMap::pathToDetUnit(), edm::ESHandle< T >::product(), SiPixelBadModule_, and sipixelobjects::PixelROC::toGlobal().

Referenced by digitize().

                                                                 {
 // Not SLHC safe for now
   
   bool isbad=false;
   
   std::vector<SiPixelQuality::disabledModuleType>disabledModules = SiPixelBadModule_->getBadComponentList();
   
   SiPixelQuality::disabledModuleType badmodule;
   
   for (size_t id=0;id<disabledModules.size();id++)
     {
       if(detID==disabledModules[id].DetID){
     isbad=true;
         badmodule = disabledModules[id];
     break;
       }
     }
   
   if(!isbad)
     return;
 
   signal_map_type& theSignal = _signal[detID];
   
   //std::cout<<"Hit in: "<< detID <<" errorType "<< badmodule.errorType<<" BadRocs="<<std::hex<<SiPixelBadModule_->getBadRocs(detID)<<dec<<" "<<std::endl;
   if(badmodule.errorType == 0){ // this is a whole dead module.
     
     for(signal_map_iterator i = theSignal.begin();i != theSignal.end(); ++i) {
       i->second.set(0.); // reset amplitude
     }
   }
   else { // all other module types: half-modules and single ROCs.
     // Get Bad ROC position:
     //follow the example of getBadRocPositions in CondFormats/SiPixelObjects/src/SiPixelQuality.cc
     std::vector<GlobalPixel> badrocpositions (0);
     for(unsigned int j = 0; j < 16; j++){
       if(SiPixelBadModule_->IsRocBad(detID, j) == true){
     
     std::vector<CablingPathToDetUnit> path = map_.product()->pathToDetUnit(detID);
     typedef  std::vector<CablingPathToDetUnit>::const_iterator IT;
     for  (IT it = path.begin(); it != path.end(); ++it) {
           const PixelROC* myroc = map_.product()->findItem(*it);
           if( myroc->idInDetUnit() == j) {
         LocalPixel::RocRowCol  local = { 39, 25};   //corresponding to center of ROC row, col
         GlobalPixel global = myroc->toGlobal( LocalPixel(local) );
         badrocpositions.push_back(global);
         break;
       }
     }
       }
     }// end of getBadRocPositions
     
     
     for(signal_map_iterator i = theSignal.begin();i != theSignal.end(); ++i) {
       std::pair<int,int> ip = PixelDigi::channelToPixel(i->first);//get pixel pos
       
       for(std::vector<GlobalPixel>::const_iterator it = badrocpositions.begin(); it != badrocpositions.end(); ++it){
     if(it->row >= 80 && ip.first >= 80 ){
       if((std::abs(ip.second - it->col) < 26) ) {i->second.set(0.);}
           else if(it->row==120 && ip.second-it->col==26){i->second.set(0.);}
           else if(it->row==119 && it->col-ip.second==26){i->second.set(0.);}
     }
     else if(it->row < 80 && ip.first < 80 ){
       if((std::abs(ip.second - it->col) < 26) ){i->second.set(0.);}
           else if(it->row==40 && ip.second-it->col==26){i->second.set(0.);}
           else if(it->row==39 && it->col-ip.second==26){i->second.set(0.);}
        }
       }
     }
   }
 }

float SiPixelDigitizerAlgorithm::pixel_aging	(	const PixelAging &	aging,
		const PixelGeomDetUnit *	pixdet,
		const TrackerTopology *	tTopo
	)		const

private

Definition at line 1627 of file SiPixelDigitizerAlgorithm.cc.

References SiPixelDigitizerAlgorithm::PixelAging::FPixIndex, GeomDet::geographicalId(), TrackerTopology::layer(), LogDebug, GeomDetEnumerators::P1PXB, GeomDetEnumerators::P1PXEC, GeomDetEnumerators::P2OTB, GeomDetEnumerators::P2OTEC, GeomDetEnumerators::P2PXEC, GeomDetEnumerators::PixelBarrel, GeomDetEnumerators::PixelEndcap, DetId::rawId(), GeomDet::subDetector(), and SiPixelDigitizerAlgorithm::PixelAging::thePixelPseudoRadDamage.

Referenced by drift().

                                                              {
   
   uint32_t detID= pixdet->geographicalId().rawId();
   
   
   // Predefined damage parameter (no aging)
   float pseudoRadDamage  = 0.0;
   
   // setup the chip indices conversion
   if    (pixdet->subDetector() ==  GeomDetEnumerators::SubDetector::PixelBarrel ||
      pixdet->subDetector() ==  GeomDetEnumerators::SubDetector::P1PXB){// barrel layers
     int layerIndex=tTopo->layer(detID);
     
      pseudoRadDamage  = aging.thePixelPseudoRadDamage[layerIndex-1];
      
      //  std::cout << "pixel_aging: " << std::endl;
      // std::cout << "Subid " << Subid << " layerIndex " << layerIndex << " ladder " << tTopo->pxbLadder(detID)  << " module  " << tTopo->pxbModule(detID) << std::endl;
      
   } else if (pixdet->subDetector() == GeomDetEnumerators::SubDetector::PixelEndcap ||
          pixdet->subDetector() == GeomDetEnumerators::SubDetector::P1PXEC ||
          pixdet->subDetector() == GeomDetEnumerators::SubDetector::P2PXEC) {                // forward disks
     unsigned int diskIndex=tTopo->layer(detID)+aging.FPixIndex; // Use diskIndex-1 later to stay consistent with BPix
     
     pseudoRadDamage  = aging.thePixelPseudoRadDamage[diskIndex-1];
     
     //    std::cout << "pixel_aging: " << std::endl;
     //    std::cout << "Subid " << Subid << " diskIndex " << diskIndex << std::endl;
   } else if (pixdet->subDetector() == GeomDetEnumerators::SubDetector::P2OTB || pixdet->subDetector() == GeomDetEnumerators::SubDetector::P2OTEC) {
     // if phase 2 OT hardcoded value as it has always been
     pseudoRadDamage = 0.;
   } // if barrel/forward
   
   //  std::cout << " pseudoRadDamage " << pseudoRadDamage << std::endl;
   //  std::cout << " end pixel_aging " << std::endl;
   
   return pseudoRadDamage;
 #ifdef TP_DEBUG
   LogDebug ("Pixel Digitizer") << " enter pixel_aging " << pseudoRadDamage;
 #endif
   
 }

void SiPixelDigitizerAlgorithm::pixel_inefficiency	(	const PixelEfficiencies &	eff,
		const PixelGeomDetUnit *	pixdet,
		const TrackerTopology *	tTopo,
		CLHEP::HepRandomEngine *	engine
	)

private

Definition at line 1475 of file SiPixelDigitizerAlgorithm.cc.

Referenced by digitize().

                                                                                  {
   
   uint32_t detID= pixdet->geographicalId().rawId();
   signal_map_type& theSignal = _signal[detID];
   const PixelTopology* topol=&pixdet->specificTopology();
   int numColumns = topol->ncolumns();  // det module number of cols&rows
   int numRows = topol->nrows();
   
   // Predefined efficiencies
   double pixelEfficiency  = 1.0;
   double columnEfficiency = 1.0;
   double chipEfficiency   = 1.0;
   
   if (eff.FromConfig) {
     // setup the chip indices conversion
     if    (pixdet->subDetector()==GeomDetEnumerators::SubDetector::PixelBarrel ||
            pixdet->subDetector()==GeomDetEnumerators::SubDetector::P1PXB){// barrel layers
       int layerIndex=tTopo->layer(detID);
       pixelEfficiency  = eff.thePixelEfficiency[layerIndex-1];
       columnEfficiency = eff.thePixelColEfficiency[layerIndex-1];
       chipEfficiency   = eff.thePixelChipEfficiency[layerIndex-1];
       //std::cout <<"Using BPix columnEfficiency = "<<columnEfficiency<< " for layer = "<<layerIndex <<"\n";
       // This should never happen, but only check if it is not an upgrade geometry
       if (NumberOfBarrelLayers==3){
         if(numColumns>416)  LogWarning ("Pixel Geometry") <<" wrong columns in barrel "<<numColumns;
         if(numRows>160)  LogWarning ("Pixel Geometry") <<" wrong rows in barrel "<<numRows;
         
         int ladder=tTopo->pxbLadder(detID);
         int module=tTopo->pxbModule(detID);
         if (module<=4) module=5-module;
         else module-=4;
         
         columnEfficiency *= eff.theLadderEfficiency_BPix[layerIndex-1][ladder-1]*eff.theModuleEfficiency_BPix[layerIndex-1][module-1]*eff.pu_scale[layerIndex-1];
       }
     } else if(pixdet->subDetector()==GeomDetEnumerators::SubDetector::PixelEndcap ||
               pixdet->subDetector()==GeomDetEnumerators::SubDetector::P1PXEC ||
               pixdet->subDetector()==GeomDetEnumerators::SubDetector::P2PXEC){                // forward disks
     
       unsigned int diskIndex=tTopo->layer(detID)+eff.FPixIndex; // Use diskIndex-1 later to stay consistent with BPix
       unsigned int panelIndex=tTopo->pxfPanel(detID);
       unsigned int moduleIndex=tTopo->pxfModule(detID);
       //if (eff.FPixIndex>diskIndex-1){throw cms::Exception("Configuration") <<"SiPixelDigitizer is using the wrong efficiency value. index = "
       //                                                                       <<diskIndex-1<<" , MinIndex = "<<eff.FPixIndex<<" ... "<<tTopo->pxfDisk(detID);}
       pixelEfficiency  = eff.thePixelEfficiency[diskIndex-1];
       columnEfficiency = eff.thePixelColEfficiency[diskIndex-1];
       chipEfficiency   = eff.thePixelChipEfficiency[diskIndex-1];
       //std::cout <<"Using FPix columnEfficiency = "<<columnEfficiency<<" for Disk = "<< tTopo->pxfDisk(detID)<<"\n";
       // Sometimes the forward pixels have wrong size,
       // this crashes the index conversion, so exit, but only check if it is not an upgrade geometry
       if (NumberOfBarrelLayers==3){  // whether it is the present or the phase 1 detector can be checked using GeomDetEnumerators::SubDetector
         if(numColumns>260 || numRows>160) {
           if(numColumns>260)  LogWarning ("Pixel Geometry") <<" wrong columns in endcaps "<<numColumns;
           if(numRows>160)  LogWarning ("Pixel Geometry") <<" wrong rows in endcaps "<<numRows;
           return;
         }
         if ((panelIndex==1 && (moduleIndex==1 || moduleIndex==2)) || (panelIndex==2 && moduleIndex==1)) { //inner modules
           columnEfficiency*=eff.theInnerEfficiency_FPix[diskIndex-1]*eff.pu_scale[3];
         } else { //outer modules
           columnEfficiency*=eff.theOuterEfficiency_FPix[diskIndex-1]*eff.pu_scale[4];
         }
       } // current detector, forward
     } else if(pixdet->subDetector()==GeomDetEnumerators::SubDetector::P2OTB ||pixdet->subDetector()==GeomDetEnumerators::SubDetector::P2OTEC) {
       // If phase 2 outer tracker, hardcoded values as they have been so far
       pixelEfficiency  = 0.999;
       columnEfficiency = 0.999;
       chipEfficiency   = 0.999;
     } // if barrel/forward
   } else { // Load precomputed factors from Database
     pixelEfficiency  = eff.PixelGeomFactors.at(detID);
     columnEfficiency = eff.ColGeomFactors.at(detID)*eff.pu_scale[eff.iPU.at(detID)];
     chipEfficiency   = eff.ChipGeomFactors.at(detID);
   }
   
 #ifdef TP_DEBUG
   LogDebug ("Pixel Digitizer") << " enter pixel_inefficiency " << pixelEfficiency << " "
                    << columnEfficiency << " " << chipEfficiency;
 #endif
   
   // Initilize the index converter
   //PixelIndices indexConverter(numColumns,numRows);
   std::unique_ptr<PixelIndices> pIndexConverter(new PixelIndices(numColumns,numRows));
 
   int chipIndex = 0;
   int rowROC = 0;
   int colROC = 0;
   std::map<int, int, std::less<int> >chips, columns;
   std::map<int, int, std::less<int> >::iterator iter;
   
   // Find out the number of columns and rocs hits
   // Loop over hit pixels, amplitude in electrons, channel = coded row,col
   for (signal_map_const_iterator i = theSignal.begin(); i != theSignal.end(); ++i) {
     
     int chan = i->first;
     std::pair<int,int> ip = PixelDigi::channelToPixel(chan);
     int row = ip.first;  // X in row
     int col = ip.second; // Y is in col
     //transform to ROC index coordinates
     pIndexConverter->transformToROC(col,row,chipIndex,colROC,rowROC);
     int dColInChip = pIndexConverter->DColumn(colROC); // get ROC dcol from ROC col
     //dcol in mod
     int dColInDet = pIndexConverter->DColumnInModule(dColInChip,chipIndex);
     
     chips[chipIndex]++;
     columns[dColInDet]++;
   }
   
   // Delete some ROC hits.
   for ( iter = chips.begin(); iter != chips.end() ; iter++ ) {
     //float rand  = RandFlat::shoot();
     float rand  = CLHEP::RandFlat::shoot(engine);
     if( rand > chipEfficiency ) chips[iter->first]=0;
   }
   
   // Delete some Dcol hits.
   for ( iter = columns.begin(); iter != columns.end() ; iter++ ) {
     //float rand  = RandFlat::shoot();
     float rand  = CLHEP::RandFlat::shoot(engine);
     if( rand > columnEfficiency ) columns[iter->first]=0;
   }
   
   // Now loop again over pixels to kill some of them.
   // Loop over hit pixels, amplitude in electrons, channel = coded row,col
   for(signal_map_iterator i = theSignal.begin();i != theSignal.end(); ++i) {
     
     //    int chan = i->first;
     std::pair<int,int> ip = PixelDigi::channelToPixel(i->first);//get pixel pos
     int row = ip.first;  // X in row
     int col = ip.second; // Y is in col
     //transform to ROC index coordinates
     pIndexConverter->transformToROC(col,row,chipIndex,colROC,rowROC);
     int dColInChip = pIndexConverter->DColumn(colROC); //get ROC dcol from ROC col
     //dcol in mod
     int dColInDet = pIndexConverter->DColumnInModule(dColInChip,chipIndex);
     
     //float rand  = RandFlat::shoot();
     float rand  = CLHEP::RandFlat::shoot(engine);
     if( chips[chipIndex]==0 || columns[dColInDet]==0
     || rand>pixelEfficiency ) {
       // make pixel amplitude =0, pixel will be lost at clusterization
       i->second.set(0.); // reset amplitude,
     } // end if
     
   } // end pixel loop
 } // end pixel_indefficiency

void SiPixelDigitizerAlgorithm::pixel_inefficiency_db ( uint32_t detID )

private

Definition at line 1839 of file SiPixelDigitizerAlgorithm.cc.

References _signal, PixelDigi::channelToPixel(), cuy::col, mps_fire::i, and theSiPixelGainCalibrationService_.

Referenced by digitize().

                                                                     {
  
   signal_map_type& theSignal = _signal[detID];
 
   // Loop over hit pixels, amplitude in electrons, channel = coded row,col
   for(signal_map_iterator i = theSignal.begin();i != theSignal.end(); ++i) {
 
     //    int chan = i->first;
     std::pair<int,int> ip = PixelDigi::channelToPixel(i->first);//get pixel pos
     int row = ip.first;  // X in row
     int col = ip.second; // Y is in col
     //transform to ROC index coordinates
     if(theSiPixelGainCalibrationService_->isDead(detID, col, row)){
       //      std::cout << "now in isdead check, row " << detID << " " << col << "," << row << std::std::endl;
       // make pixel amplitude =0, pixel will be lost at clusterization
       i->second.set(0.); // reset amplitude,
     } // end if
   } // end pixel loop
 } // end pixel_indefficiency

void SiPixelDigitizerAlgorithm::primary_ionization	(	const PSimHit &	hit,
		std::vector< EnergyDepositUnit > &	ionization_points,
		CLHEP::HepRandomEngine *	engine
	)		const

private

Definition at line 773 of file SiPixelDigitizerAlgorithm.cc.

References PSimHit::energyLoss(), PSimHit::entryPoint(), PSimHit::exitPoint(), objects.autophobj::float, fluctuateCharge, fluctuateEloss(), GeVperElectron, mps_fire::i, createfilelist::int, LogDebug, PV3DBase< T, PVType, FrameType >::mag(), PSimHit::pabs(), PSimHit::particleType(), sysUtil::pid, point, PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

Referenced by accumulateSimHits().

                                                                                                                                                           {
   
   // Straight line approximation for trajectory inside active media
   
   const float SegmentLength = 0.0010; //10microns in cm
   float energy;
   
   // Get the 3D segment direction vector
   LocalVector direction = hit.exitPoint() - hit.entryPoint();
   
   float eLoss = hit.energyLoss();  // Eloss in GeV
   float length = direction.mag();  // Track length in Silicon
   
   int NumberOfSegments = int ( length / SegmentLength); // Number of segments
   if(NumberOfSegments < 1) NumberOfSegments = 1;
   
 #ifdef TP_DEBUG
   LogDebug ("Pixel Digitizer")
     << " enter primary_ionzation " << NumberOfSegments
     << " shift = "
     << (hit.exitPoint().x()-hit.entryPoint().x()) << " "
     << (hit.exitPoint().y()-hit.entryPoint().y()) << " "
     << (hit.exitPoint().z()-hit.entryPoint().z()) << " "
     << hit.particleType() <<" "<< hit.pabs() ;
 #endif
   
   float* elossVector = new float[NumberOfSegments];  // Eloss vector
   
   if( fluctuateCharge ) {
     //MP DA RIMUOVERE ASSOLUTAMENTE
     int pid = hit.particleType();
     //int pid=211;  // assume it is a pion
     
     float momentum = hit.pabs();
     // Generate fluctuated charge points
     fluctuateEloss(pid, momentum, eLoss, length, NumberOfSegments,
            elossVector, engine);
   }
   
   ionization_points.resize( NumberOfSegments); // set size
   
   // loop over segments
   for ( int i = 0; i != NumberOfSegments; i++) {
     // Divide the segment into equal length subsegments
     Local3DPoint point = hit.entryPoint() +
       float((i+0.5)/NumberOfSegments) * direction;
     
     if( fluctuateCharge )
       energy = elossVector[i]/GeVperElectron; // Convert charge to elec.
     else
       energy = hit.energyLoss()/GeVperElectron/float(NumberOfSegments);
     
     EnergyDepositUnit edu( energy, point); //define position,energy point
     ionization_points[i] = edu; // save
     
 #ifdef TP_DEBUG
     LogDebug ("Pixel Digitizer")
       << i << " " << ionization_points[i].x() << " "
       << ionization_points[i].y() << " "
       << ionization_points[i].z() << " "
       << ionization_points[i].energy();
 #endif
     
   }  // end for loop
   
   delete[] elossVector;
   
 }

Member Data Documentation

signalMaps SiPixelDigitizerAlgorithm::_signal

private

Definition at line 280 of file SiPixelDigitizerAlgorithm.h.

Referenced by add_noise(), digitize(), induce_signal(), make_digis(), module_killing_conf(), module_killing_DB(), pixel_inefficiency(), and pixel_inefficiency_db().

const bool SiPixelDigitizerAlgorithm::addChargeVCALSmearing

private

Definition at line 349 of file SiPixelDigitizerAlgorithm.h.

Referenced by add_noise().

const bool SiPixelDigitizerAlgorithm::addNoise

private

Definition at line 348 of file SiPixelDigitizerAlgorithm.h.

Referenced by digitize().

const bool SiPixelDigitizerAlgorithm::addNoisyPixels

private

Definition at line 350 of file SiPixelDigitizerAlgorithm.h.

Referenced by add_noise().

const bool SiPixelDigitizerAlgorithm::AddPixelAging

private

Definition at line 363 of file SiPixelDigitizerAlgorithm.h.

Referenced by drift().

const bool SiPixelDigitizerAlgorithm::AddPixelInefficiency

private

Definition at line 353 of file SiPixelDigitizerAlgorithm.h.

Referenced by digitize(), init_DynIneffDB(), and SiPixelDigitizerAlgorithm().

const bool SiPixelDigitizerAlgorithm::addThresholdSmearing

private

Definition at line 355 of file SiPixelDigitizerAlgorithm.h.

Referenced by digitize().

const bool SiPixelDigitizerAlgorithm::alpha2Order

private

Definition at line 299 of file SiPixelDigitizerAlgorithm.h.

Referenced by drift(), and DriftDirection().

const float SiPixelDigitizerAlgorithm::BPix_p0

private

Definition at line 341 of file SiPixelDigitizerAlgorithm.h.

Referenced by missCalibrate().

const float SiPixelDigitizerAlgorithm::BPix_p1

private

Definition at line 342 of file SiPixelDigitizerAlgorithm.h.

Referenced by missCalibrate().

const float SiPixelDigitizerAlgorithm::BPix_p2

private

Definition at line 343 of file SiPixelDigitizerAlgorithm.h.

Referenced by missCalibrate().

const float SiPixelDigitizerAlgorithm::BPix_p3

private

Definition at line 344 of file SiPixelDigitizerAlgorithm.h.

Referenced by missCalibrate().

const std::map<int,CalParameters,std::less<int> > SiPixelDigitizerAlgorithm::calmap

private

Definition at line 378 of file SiPixelDigitizerAlgorithm.h.

Referenced by initCal().

const float SiPixelDigitizerAlgorithm::ClusterWidth

private

Definition at line 304 of file SiPixelDigitizerAlgorithm.h.

Referenced by induce_signal().

const Parameters SiPixelDigitizerAlgorithm::DeadModules

private

Definition at line 289 of file SiPixelDigitizerAlgorithm.h.

Referenced by module_killing_conf().

const float SiPixelDigitizerAlgorithm::Dist300

private

Definition at line 298 of file SiPixelDigitizerAlgorithm.h.

Referenced by drift().

const bool SiPixelDigitizerAlgorithm::doMissCalibrate

private

Definition at line 358 of file SiPixelDigitizerAlgorithm.h.

Referenced by make_digis().

const float SiPixelDigitizerAlgorithm::electronsPerVCAL

private

Definition at line 327 of file SiPixelDigitizerAlgorithm.h.

Referenced by missCalibrate().

const float SiPixelDigitizerAlgorithm::electronsPerVCAL_L1

private

Definition at line 329 of file SiPixelDigitizerAlgorithm.h.

Referenced by missCalibrate().

const float SiPixelDigitizerAlgorithm::electronsPerVCAL_L1_Offset

private

Definition at line 330 of file SiPixelDigitizerAlgorithm.h.

Referenced by missCalibrate().

const float SiPixelDigitizerAlgorithm::electronsPerVCAL_Offset

private

Definition at line 328 of file SiPixelDigitizerAlgorithm.h.

Referenced by missCalibrate().

const std::unique_ptr<SiG4UniversalFluctuation> SiPixelDigitizerAlgorithm::fluctuate

private

Definition at line 374 of file SiPixelDigitizerAlgorithm.h.

Referenced by fluctuateEloss().

const bool SiPixelDigitizerAlgorithm::fluctuateCharge

private

Definition at line 351 of file SiPixelDigitizerAlgorithm.h.

Referenced by primary_ionization().

const float SiPixelDigitizerAlgorithm::FPix_p0

private

Definition at line 337 of file SiPixelDigitizerAlgorithm.h.

Referenced by missCalibrate().

const float SiPixelDigitizerAlgorithm::FPix_p1

private

Definition at line 338 of file SiPixelDigitizerAlgorithm.h.

Referenced by missCalibrate().

const float SiPixelDigitizerAlgorithm::FPix_p2

private

Definition at line 339 of file SiPixelDigitizerAlgorithm.h.

Referenced by missCalibrate().

const float SiPixelDigitizerAlgorithm::FPix_p3

private

Definition at line 340 of file SiPixelDigitizerAlgorithm.h.

Referenced by missCalibrate().

edm::ESHandle<TrackerGeometry> SiPixelDigitizerAlgorithm::geom_

private

Definition at line 83 of file SiPixelDigitizerAlgorithm.h.

Referenced by init_DynIneffDB().

const float SiPixelDigitizerAlgorithm::GeVperElectron

private

Definition at line 294 of file SiPixelDigitizerAlgorithm.h.

Referenced by primary_ionization().

const bool SiPixelDigitizerAlgorithm::makeDigiSimLinks_

private

Definition at line 282 of file SiPixelDigitizerAlgorithm.h.

Referenced by induce_signal(), and make_digis().

edm::ESHandle<SiPixelFedCablingMap> SiPixelDigitizerAlgorithm::map_

private

Definition at line 82 of file SiPixelDigitizerAlgorithm.h.

Referenced by module_killing_DB().

const int SiPixelDigitizerAlgorithm::NumberOfBarrelLayers

private

Definition at line 306 of file SiPixelDigitizerAlgorithm.h.

Referenced by pixel_inefficiency(), SiPixelDigitizerAlgorithm::PixelAging::PixelAging(), and SiPixelDigitizerAlgorithm::PixelEfficiencies::PixelEfficiencies().

const int SiPixelDigitizerAlgorithm::NumberOfEndcapDisks

private

Definition at line 307 of file SiPixelDigitizerAlgorithm.h.

Referenced by SiPixelDigitizerAlgorithm::PixelAging::PixelAging(), and SiPixelDigitizerAlgorithm::PixelEfficiencies::PixelEfficiencies().

const PixelAging SiPixelDigitizerAlgorithm::pixelAging_

private

Definition at line 431 of file SiPixelDigitizerAlgorithm.h.

Referenced by drift().

PixelEfficiencies SiPixelDigitizerAlgorithm::pixelEfficiencies_

private

Definition at line 430 of file SiPixelDigitizerAlgorithm.h.

Referenced by calculateInstlumiFactor(), digitize(), and init_DynIneffDB().

const float SiPixelDigitizerAlgorithm::Sigma0

private

Definition at line 297 of file SiPixelDigitizerAlgorithm.h.

Referenced by drift().

edm::ESHandle<SiPixelQuality> SiPixelDigitizerAlgorithm::SiPixelBadModule_

private

Definition at line 79 of file SiPixelDigitizerAlgorithm.h.

Referenced by module_killing_DB().

edm::ESHandle<SiPixelDynamicInefficiency> SiPixelDigitizerAlgorithm::SiPixelDynamicInefficiency_

private

Definition at line 86 of file SiPixelDigitizerAlgorithm.h.

Referenced by init_DynIneffDB().

edm::ESHandle<SiPixelLorentzAngle> SiPixelDigitizerAlgorithm::SiPixelLorentzAngle_

private

Definition at line 76 of file SiPixelDigitizerAlgorithm.h.

Referenced by DriftDirection().

const float SiPixelDigitizerAlgorithm::tanLorentzAnglePerTesla_BPix

private

Definition at line 335 of file SiPixelDigitizerAlgorithm.h.

Referenced by DriftDirection().

const float SiPixelDigitizerAlgorithm::tanLorentzAnglePerTesla_FPix

private

Definition at line 334 of file SiPixelDigitizerAlgorithm.h.

Referenced by DriftDirection().

const int SiPixelDigitizerAlgorithm::theAdcFullScale

private

Definition at line 311 of file SiPixelDigitizerAlgorithm.h.

Referenced by make_digis(), and SiPixelDigitizerAlgorithm().

const int SiPixelDigitizerAlgorithm::theAdcFullScaleStack

private

Definition at line 312 of file SiPixelDigitizerAlgorithm.h.

Referenced by make_digis().

const float SiPixelDigitizerAlgorithm::theElectronPerADC

private

Definition at line 310 of file SiPixelDigitizerAlgorithm.h.

Referenced by make_digis(), and SiPixelDigitizerAlgorithm().

const float SiPixelDigitizerAlgorithm::theGainSmearing

private

Definition at line 359 of file SiPixelDigitizerAlgorithm.h.

const float SiPixelDigitizerAlgorithm::theNoiseInElectrons

private

Definition at line 313 of file SiPixelDigitizerAlgorithm.h.

Referenced by add_noise(), and digitize().

const std::unique_ptr<GaussianTailNoiseGenerator> SiPixelDigitizerAlgorithm::theNoiser

private

Definition at line 375 of file SiPixelDigitizerAlgorithm.h.

Referenced by add_noise().

const float SiPixelDigitizerAlgorithm::theOffsetSmearing

private

Definition at line 360 of file SiPixelDigitizerAlgorithm.h.

const float SiPixelDigitizerAlgorithm::theReadoutNoise

private

Definition at line 314 of file SiPixelDigitizerAlgorithm.h.

Referenced by add_noise().

const std::unique_ptr<SiPixelGainCalibrationOfflineSimService> SiPixelDigitizerAlgorithm::theSiPixelGainCalibrationService_

private

Definition at line 421 of file SiPixelDigitizerAlgorithm.h.

Referenced by pixel_inefficiency_db().

const float SiPixelDigitizerAlgorithm::theThresholdInE_BPix

private

Definition at line 318 of file SiPixelDigitizerAlgorithm.h.

Referenced by add_noise(), digitize(), make_digis(), and SiPixelDigitizerAlgorithm().

const float SiPixelDigitizerAlgorithm::theThresholdInE_BPix_L1

private

Definition at line 319 of file SiPixelDigitizerAlgorithm.h.

Referenced by digitize(), make_digis(), and SiPixelDigitizerAlgorithm().

const float SiPixelDigitizerAlgorithm::theThresholdInE_BPix_L2

private

Definition at line 320 of file SiPixelDigitizerAlgorithm.h.

Referenced by digitize(), make_digis(), and SiPixelDigitizerAlgorithm().

const float SiPixelDigitizerAlgorithm::theThresholdInE_FPix

private

Definition at line 317 of file SiPixelDigitizerAlgorithm.h.

Referenced by add_noise(), digitize(), make_digis(), and SiPixelDigitizerAlgorithm().

const double SiPixelDigitizerAlgorithm::theThresholdSmearing_BPix

private

Definition at line 323 of file SiPixelDigitizerAlgorithm.h.

Referenced by digitize().

const double SiPixelDigitizerAlgorithm::theThresholdSmearing_BPix_L1

private

Definition at line 324 of file SiPixelDigitizerAlgorithm.h.

Referenced by digitize().

const double SiPixelDigitizerAlgorithm::theThresholdSmearing_BPix_L2

private

Definition at line 325 of file SiPixelDigitizerAlgorithm.h.

Referenced by digitize().

const double SiPixelDigitizerAlgorithm::theThresholdSmearing_FPix

private

Definition at line 322 of file SiPixelDigitizerAlgorithm.h.

Referenced by digitize().

const float SiPixelDigitizerAlgorithm::theTofLowerCut

private

Definition at line 332 of file SiPixelDigitizerAlgorithm.h.

Referenced by accumulateSimHits().

const float SiPixelDigitizerAlgorithm::theTofUpperCut

private

Definition at line 333 of file SiPixelDigitizerAlgorithm.h.

Referenced by accumulateSimHits().

const double SiPixelDigitizerAlgorithm::tMax

private

Definition at line 370 of file SiPixelDigitizerAlgorithm.h.

Referenced by fluctuateEloss(), and SiPixelDigitizerAlgorithm().

const bool SiPixelDigitizerAlgorithm::use_deadmodule_DB_

private

Definition at line 286 of file SiPixelDigitizerAlgorithm.h.

Referenced by digitize().

const bool SiPixelDigitizerAlgorithm::use_ineff_from_db_

private

Definition at line 284 of file SiPixelDigitizerAlgorithm.h.

Referenced by digitize().

const bool SiPixelDigitizerAlgorithm::use_LorentzAngle_DB_

private

Definition at line 287 of file SiPixelDigitizerAlgorithm.h.

Referenced by DriftDirection().

const bool SiPixelDigitizerAlgorithm::use_module_killing_

private

Definition at line 285 of file SiPixelDigitizerAlgorithm.h.

Referenced by digitize().

Classes

Public Member Functions

Private Types

Private Member Functions

Private Attributes

Detailed Description

Member Typedef Documentation

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation