#include <DTEfficiencyTask.h>

Inheritance diagram for DTEfficiencyTask:

Public Member Functions
void	analyze (const edm::Event &event, const edm::EventSetup &setup)

void	beginLuminosityBlock (edm::LuminosityBlock const &lumiSeg, edm::EventSetup const &context)
	To reset the MEs. More...

	DTEfficiencyTask (const edm::ParameterSet &pset)
	Constructor. More...

virtual	~DTEfficiencyTask ()
	Destructor. More...

Public Member Functions inherited from DQMEDAnalyzer
virtual void	beginRun (edm::Run const &, edm::EventSetup const &) final

virtual void	beginStream (edm::StreamID id) final

	DQMEDAnalyzer (void)

virtual void	endLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, dqmDetails::NoCache *) const final

virtual void	endRunSummary (edm::Run const &, edm::EventSetup const &, dqmDetails::NoCache *) const final

uint32_t	streamId () const

Public Member Functions inherited from edm::stream::EDAnalyzer< edm::RunSummaryCache< dqmDetails::NoCache >, edm::LuminosityBlockSummaryCache< dqmDetails::NoCache > >
	EDAnalyzer ()=default

Public Member Functions inherited from edm::stream::EDAnalyzerBase
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)

	EDAnalyzerBase ()

ModuleDescription const &	moduleDescription () const

virtual	~EDAnalyzerBase ()

Public Member Functions inherited from edm::EDConsumerBase
std::vector< ConsumesInfo >	consumesInfo () const

	EDConsumerBase ()

ProductHolderIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const

void	itemsMayGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

void	itemsToGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

std::vector < ProductHolderIndexAndSkipBit > const &	itemsToGetFromEvent () const

void	labelsForToken (EDGetToken iToken, Labels &oLabels) const

void	modulesDependentUpon (std::string const &iProcessName, std::string const &iModuleLabel, bool iPrint, std::vector< char const * > &oModuleLabels) const

void	modulesWhoseProductsAreConsumed (std::vector< ModuleDescription const * > &modules, ProductRegistry const &preg, std::map< std::string, ModuleDescription const * > const &labelsToDesc, std::string const &processName) const

bool	registeredToConsume (ProductHolderIndex, bool, BranchType) const

bool	registeredToConsumeMany (TypeID const &, BranchType) const

void	updateLookup (BranchType iBranchType, ProductHolderIndexHelper const &)

virtual	~EDConsumerBase ()

Protected Member Functions
void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override

void	dqmBeginRun (const edm::Run &, const edm::EventSetup &)
	BeginRun. More...

Protected Member Functions inherited from edm::EDConsumerBase
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)

EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)

ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...

template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()

void	consumesMany (const TypeToGet &id)

template<BranchType B>
void	consumesMany (const TypeToGet &id)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)

EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

Private Member Functions
void	fillHistos (DTLayerId lId, int firstWire, int lastWire, int numWire)

void	fillHistos (DTLayerId lId, int firstWire, int lastWire, int missingWire, bool UnassHit)

Private Attributes
bool	debug

std::map< DTLayerId, std::vector< MonitorElement * > >	histosPerL

edm::ESHandle< DTGeometry >	muonGeom

edm::ParameterSet	parameters

edm::EDGetTokenT < DTRecSegment4DCollection >	recHits4DToken_

edm::EDGetTokenT < DTRecHitCollection >	recHitToken_

Additional Inherited Members
Public Types inherited from edm::stream::EDAnalyzer< edm::RunSummaryCache< dqmDetails::NoCache >, edm::LuminosityBlockSummaryCache< dqmDetails::NoCache > >
typedef CacheContexts< T...>	CacheTypes

typedef CacheTypes::GlobalCache	GlobalCache

typedef AbilityChecker< T...>	HasAbility

typedef CacheTypes::LuminosityBlockCache	LuminosityBlockCache

typedef LuminosityBlockContextT < LuminosityBlockCache, RunCache, GlobalCache >	LuminosityBlockContext

typedef CacheTypes::LuminosityBlockSummaryCache	LuminosityBlockSummaryCache

typedef CacheTypes::RunCache	RunCache

typedef RunContextT< RunCache, GlobalCache >	RunContext

typedef CacheTypes::RunSummaryCache	RunSummaryCache

Public Types inherited from edm::stream::EDAnalyzerBase
typedef EDAnalyzerAdaptorBase	ModuleType

Public Types inherited from edm::EDConsumerBase
typedef ProductLabels	Labels

Static Public Member Functions inherited from DQMEDAnalyzer
static std::shared_ptr < dqmDetails::NoCache >	globalBeginLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, LuminosityBlockContext const *)

static std::shared_ptr < dqmDetails::NoCache >	globalBeginRunSummary (edm::Run const &, edm::EventSetup const &, RunContext const *)

static void	globalEndLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, LuminosityBlockContext const , dqmDetails::NoCache )

static void	globalEndRunSummary (edm::Run const &, edm::EventSetup const &, RunContext const , dqmDetails::NoCache )

Static Public Member Functions inherited from edm::stream::EDAnalyzerBase
static const std::string &	baseType ()

static void	fillDescriptions (ConfigurationDescriptions &descriptions)

static void	prevalidate (ConfigurationDescriptions &descriptions)

Detailed Description

DQM Analysis of 4D DT segments, it produces plots about:

single cell efficiency All histos are produced per Layer

Author: G. Mila - INFN Torino

Definition at line 38 of file DTEfficiencyTask.h.

Constructor & Destructor Documentation

DTEfficiencyTask::DTEfficiencyTask ( const edm::ParameterSet & pset )

Constructor.

Definition at line 37 of file DTEfficiencyTask.cc.

References debug, edm::ParameterSet::getParameter(), edm::ParameterSet::getUntrackedParameter(), HLT_25ns10e33_v2_cff::InputTag, HLT_25ns10e33_v2_cff::parameters, and TrackValidation_cff::pset.

                                                            {
 
   debug = pset.getUntrackedParameter<bool>("debug",false);
   // the name of the 4D rec hits collection
   recHits4DToken_ = consumes<DTRecSegment4DCollection>(
       edm::InputTag(pset.getParameter<string>("recHits4DLabel")));
   // the name of the rechits collection
   recHitToken_    = consumes<DTRecHitCollection>(
       edm::InputTag(pset.getParameter<string>("recHitLabel")));
 
   parameters = pset;
 }

DTEfficiencyTask::~DTEfficiencyTask ( )

virtual

Destructor.

Definition at line 51 of file DTEfficiencyTask.cc.

51 {

52 }

Member Function Documentation

void DTEfficiencyTask::analyze	(	const edm::Event &	event,
		const edm::EventSetup &	setup
	)

virtual

Implements edm::stream::EDAnalyzerBase.

Definition at line 153 of file DTEfficiencyTask.cc.

References filterCSVwithJSON::copy, funct::cos(), gather_cfg::cout, debug, HLT_25ns10e33_v2_cff::distance, edm::EventSetup::get(), i, DTChamber::layer(), DTWireId::layerId(), DTRangeMapAccessor::layersBySuperLayer(), GetRecoTauVFromDQM_MC_cff::next, DTRecSegment2D::specificRecHits(), DTSuperLayerId::superlayer(), DTLayerId::superlayerId(), DTChamber::superLayers(), PV3DBase< T, PVType, FrameType >::theta(), GeomDet::toGlobal(), GeomDet::toLocal(), PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

                                                                                 {
 
 
   if(debug)
     cout << "[DTEfficiencyTask] Analyze #Run: " << event.id().run()
      << " #Event: " << event.id().event() << endl;
 
 
   // Get the 4D segment collection from the event
   edm::Handle<DTRecSegment4DCollection> all4DSegments;
   event.getByToken(recHits4DToken_, all4DSegments);
 
   // Get the rechit collection from the event
   Handle<DTRecHitCollection> dtRecHits;
   event.getByToken(recHitToken_, dtRecHits);
 
   // Get the DT Geometry
   ESHandle<DTGeometry> dtGeom;
   setup.get<MuonGeometryRecord>().get(dtGeom);
 
   // Loop over all chambers containing a segment
   DTRecSegment4DCollection::id_iterator chamberId;
   for (chamberId = all4DSegments->id_begin();
        chamberId != all4DSegments->id_end();
        ++chamberId) {
 
     // Get the chamber
     const DTChamber* chamber = dtGeom->chamber(*chamberId);
 
     // Get all 1D RecHits to be used for searches of hits not associated to segments and map them by wire
     const vector<const DTSuperLayer*> SLayers = chamber->superLayers();
     map<DTWireId, int> wireAnd1DRecHits;
     for(vector<const DTSuperLayer*>::const_iterator superlayer = SLayers.begin();
     superlayer != SLayers.end();
     superlayer++) {
     DTRecHitCollection::range  range = dtRecHits->get(DTRangeMapAccessor::layersBySuperLayer((*superlayer)->id()));
     // Loop over the rechits of this ChamberId
     for (DTRecHitCollection::const_iterator rechit = range.first;
          rechit!=range.second;
          ++rechit){
       wireAnd1DRecHits[(*rechit).wireId()] = (*rechit).wireId().wire();
     }
       }
 
 
     // Get the 4D segment range for the corresponding ChamerId
     DTRecSegment4DCollection::range  range = all4DSegments->get(*chamberId);
     int nsegm = distance(range.first, range.second);
     if(debug)
       cout << "   Chamber: " << *chamberId << " has " << nsegm
        << " 4D segments" << endl;
 
 
     // Loop over the rechits of this ChamerId
     for (DTRecSegment4DCollection::const_iterator segment4D = range.first;
      segment4D!=range.second;
      ++segment4D) {
       if(debug)
     cout << "   == RecSegment dimension: " << (*segment4D).dimension() << endl;
 
       // If Station != 4 skip RecHits with dimension != 4
       // For the Station 4 consider 2D RecHits
       if((*chamberId).station() != 4 && (*segment4D).dimension() != 4) {
     if(debug)
       cout << "[DTEfficiencyTask]***Warning: RecSegment dimension is not 4 but "
            << (*segment4D).dimension() << ", skipping!" << endl;
     continue;
       } else if((*chamberId).station() == 4 && (*segment4D).dimension() != 2) {
     if(debug)
       cout << "[DTEfficiencyTask]***Warning: RecSegment dimension is not 2 but "
            << (*segment4D).dimension() << ", skipping!" << endl;
     continue;
       }
 
       vector<DTRecHit1D> recHits1D;
       bool rPhi = false;
       bool rZ = false;
 
       // Get 1D RecHits and select only events with 7 or 8 hits in phi and 3 or 4 hits in theta (if any)
       const DTChamberRecSegment2D* phiSeg = (*segment4D).phiSegment();
       vector<DTRecHit1D> phiRecHits = phiSeg->specificRecHits();
       rPhi = true;
       if(phiRecHits.size() < 7 || phiRecHits.size() > 8 ) {
     if(debug)
       cout << "[DTEfficiencyTask] Phi segments has: " << phiRecHits.size()
            << " hits, skipping" << endl; // FIXME: info output
     continue;
       }
       copy(phiRecHits.begin(), phiRecHits.end(), back_inserter(recHits1D));
       const DTSLRecSegment2D* zSeg = 0;
       if((*segment4D).dimension() == 4) {
     rZ = true;
     zSeg = (*segment4D).zSegment();
     vector<DTRecHit1D> zRecHits = zSeg->specificRecHits();
     if(zRecHits.size() < 3 || zRecHits.size() > 4 ) {
       if(debug)
         cout << "[DTEfficiencyTask] Theta segments has: " << zRecHits.size()
          << " hits, skipping" << endl; // FIXME: info output
       continue;
     }
     copy(zRecHits.begin(), zRecHits.end(), back_inserter(recHits1D));
       }
 
       // Skip the segment if it has more than 1 hit on the same layer
       vector<DTWireId> wireMap;
       for(vector<DTRecHit1D>::const_iterator recHit1D = recHits1D.begin();
       recHit1D != recHits1D.end();
       recHit1D++) {
     wireMap.push_back((*recHit1D).wireId());
       }
 
       bool hitsOnSameLayer = false;
       for(vector<DTWireId>::const_iterator channelId = wireMap.begin();
       channelId != wireMap.end(); channelId++) {
     vector<DTWireId>::const_iterator next = channelId;
     next++;
     for(vector<DTWireId>::const_iterator ite = next; ite != wireMap.end(); ite++) {
       if((*channelId).layerId() == (*ite).layerId()) {
         hitsOnSameLayer = true;
       }
     }
       }
       if(hitsOnSameLayer) {
     if(debug)
       cout << "[DTEfficiencyTask] This RecHit has 2 hits on the same layer, skipping!" << endl;
     continue;
       }
 
 
       // Select 2D segments with angle smaller than 45 deg
       LocalVector phiDirectionInChamber = (*phiSeg).localDirection();
       if(rPhi && fabs(phiDirectionInChamber.x()/phiDirectionInChamber.z()) > 1) {
     if(debug) {
       cout << "         RPhi segment has angle > 45 deg, skipping! " << endl;
       cout << "              Theta = " << phiDirectionInChamber.theta() << endl;
     }
     continue;
       }
       if(rZ) {
      LocalVector zDirectionInChamber = (*zSeg).localDirection();
      if(fabs(zDirectionInChamber.y()/zDirectionInChamber.z()) > 1) {
        if(debug){
          cout << "         RZ segment has angle > 45 deg, skipping! "  << endl;
          cout << "              Theta = " << zDirectionInChamber.theta() << endl;
        }
        continue;
      }
       }
 
 
       // Skip if the 4D segment has only 10 hits
       if(recHits1D.size() == 10) {
     if(debug)
       cout << "[DTEfficiencyTask] 4D Segment with only 10 hits, skipping!" << endl;
     continue;
       }
 
 
       // Analyse the case of 11 recHits for MB1,MB2,MB3 and of 7 recHits for MB4
       if((rPhi && recHits1D.size() == 7) || (rZ && recHits1D.size() == 11)) {
 
     if(debug) {
       if(rPhi && recHits1D.size() == 7)
         cout << "[DTEfficiencyTask] MB4 Segment with only 7 hits!" << endl;
       if(rZ && recHits1D.size() == 11)
          cout << "[DTEfficiencyTask] 4D Segment with only 11 hits!" << endl;
     }
 
     // Find the layer without RecHits ----------------------------------------
     const vector<const DTSuperLayer*> SupLayers = chamber->superLayers();
         map<DTLayerId, bool> layerMap;
     map<DTWireId, float> wireAndPosInChamberAtLayerZ;
     // Loop over layers and wires to fill a map
     for(vector<const DTSuperLayer*>::const_iterator superlayer = SupLayers.begin();
         superlayer != SupLayers.end();
         superlayer++) {
       const vector<const DTLayer*> Layers = (*superlayer)->layers();
       for(vector<const DTLayer*>::const_iterator layer = Layers.begin();
           layer != Layers.end();
           layer++) {
         layerMap.insert(make_pair((*layer)->id(), false));
         const int firstWire = dtGeom->layer((*layer)->id())->specificTopology().firstChannel();
         const int lastWire = dtGeom->layer((*layer)->id())->specificTopology().lastChannel();
         for(int i=firstWire; i - lastWire <= 0; i++) {
           DTWireId wireId((*layer)->id(), i);
           float wireX = (*layer)->specificTopology().wirePosition(wireId.wire());
           LocalPoint wirePosInLay(wireX,0,0);
           GlobalPoint wirePosGlob = (*layer)->toGlobal(wirePosInLay);
           LocalPoint wirePosInChamber = chamber->toLocal(wirePosGlob);
           if((*superlayer)->id().superlayer() == 1 || (*superlayer)->id().superlayer() == 3) {
         wireAndPosInChamberAtLayerZ.insert(make_pair(wireId, wirePosInChamber.x()));
           } else {
         wireAndPosInChamberAtLayerZ.insert(make_pair(wireId, wirePosInChamber.y()));
           }
         }
       }
     }
 
     // Loop over segment 1D RecHit
     map<DTLayerId, int> NumWireMap;
     for(vector<DTRecHit1D>::const_iterator recHit = recHits1D.begin();
         recHit != recHits1D.end();
         recHit++) {
       layerMap[(*recHit).wireId().layerId()]= true;
       NumWireMap[(*recHit).wireId().layerId()]= (*recHit).wireId().wire();
     }
 
     DTLayerId missLayerId;
     //Loop over the map and find the layer without hits
     for(map<DTLayerId, bool>::const_iterator iter = layerMap.begin();
         iter != layerMap.end(); iter++) {
       if(!(*iter).second) missLayerId = (*iter).first;
     }
     if(debug)
       cout << "[DTEfficiencyTask] Layer without recHits is: " << missLayerId << endl;
     // -------------------------------------------------------
 
     const DTLayer* missLayer = chamber->layer(missLayerId);
 
     LocalPoint missLayerPosInChamber = chamber->toLocal(missLayer->toGlobal(LocalPoint(0,0,0)));
 
     // Segment position at Wire z in chamber local frame
     LocalPoint segPosAtZLayer = (*segment4D).localPosition()
       + (*segment4D).localDirection()*missLayerPosInChamber.z()/cos((*segment4D).localDirection().theta());
 
     DTWireId missWireId;
 
     // Find the id of the cell without hit ---------------------------------------------------
     for(map<DTWireId, float>::const_iterator wireAndPos = wireAndPosInChamberAtLayerZ.begin();
         wireAndPos != wireAndPosInChamberAtLayerZ.end();
         wireAndPos++) {
       DTWireId wireId = (*wireAndPos).first;
       if(wireId.layerId() == missLayerId) {
         if(missLayerId.superlayerId().superlayer() == 1 || missLayerId.superlayerId().superlayer() == 3 ) {
           if(fabs(segPosAtZLayer.x() - (*wireAndPos).second) < 2.1)
         missWireId = wireId;
         } else {
           if(fabs(segPosAtZLayer.y() - (*wireAndPos).second) < 2.1)
         missWireId = wireId;
         }
       }
     }
     if(debug)
       cout << "[DTEfficiencyTask] Cell without hit is: " << missWireId << endl;
     // ----------------------------------------------------------
 
     bool foundUnAssRechit = false;
 
     // Look for unassociated hits in this cell
     if(wireAnd1DRecHits.find(missWireId) != wireAnd1DRecHits.end()) {
       if(debug)
         cout << "[DTEfficiencyTask] Unassociated Hit found!" << endl;
       foundUnAssRechit = true;
     }
 
 
     for(map<DTLayerId, bool>::const_iterator iter = layerMap.begin();
         iter != layerMap.end(); iter++) {
       if((*iter).second)
         fillHistos((*iter).first, dtGeom->layer((*iter).first)->specificTopology().firstChannel(), dtGeom->layer((*iter).first)->specificTopology().lastChannel(), NumWireMap[(*iter).first]);
       else
         fillHistos((*iter).first, dtGeom->layer((*iter).first)->specificTopology().firstChannel(), dtGeom->layer((*iter).first)->specificTopology().lastChannel(), missWireId.wire(), foundUnAssRechit);
     }
 
       } // End of the loop for segment with 7 or 11 recHits
 
       if((rPhi && recHits1D.size() == 8) || (rZ && recHits1D.size() == 12)) {
     map<DTLayerId, int> NumWireMap;
     DTLayerId LayerID;
     for(vector<DTRecHit1D>::const_iterator recHit = recHits1D.begin();
         recHit != recHits1D.end();
         recHit++) {
       LayerID = (*recHit).wireId().layerId();
       NumWireMap[LayerID]= (*recHit).wireId().wire();
     }
     for(map<DTLayerId, int>::const_iterator iter = NumWireMap.begin();
         iter != NumWireMap.end(); iter++) {
       fillHistos((*iter).first, dtGeom->layer((*iter).first)->specificTopology().firstChannel(), dtGeom->layer((*iter).first)->specificTopology().lastChannel(), NumWireMap[(*iter).first]);
     }
       }
 
     } // End of loop over the 4D segments inside a sigle chamber
   } // End of loop over all tha chamber with at least a 4D segment in the event
 }

void DTEfficiencyTask::beginLuminosityBlock	(	edm::LuminosityBlock const &	lumiSeg,
		edm::EventSetup const &	context
	)

virtual

To reset the MEs.

Reimplemented from edm::stream::EDAnalyzerBase.

Definition at line 137 of file DTEfficiencyTask.cc.

References timingPdfMaker::histo, i, edm::LuminosityBlockBase::id(), edm::LuminosityBlockID::luminosityBlock(), HLT_25ns10e33_v2_cff::parameters, and findQualityFiles::size.

                                                                                                      {
 
 
   if(lumiSeg.id().luminosityBlock()%parameters.getUntrackedParameter<int>("ResetCycle", 3) == 0) {
     for(map<DTLayerId, vector<MonitorElement*> > ::const_iterator histo = histosPerL.begin();
     histo != histosPerL.end();
     histo++) {
       int size = (*histo).second.size();
       for(int i=0; i<size; i++){
     (*histo).second[i]->Reset();
       }
     }
   }
 
 }

void DTEfficiencyTask::bookHistograms	(	DQMStore::IBooker &	ibooker,
		edm::Run const &	iRun,
		edm::EventSetup const &	context
	)

overrideprotectedvirtual

Implements DQMEDAnalyzer.

Definition at line 62 of file DTEfficiencyTask.cc.

References DQMStore::IBooker::book1D(), DTSuperLayerId::chamberId(), gather_cfg::cout, debug, mergeVDriftHistosByStation::histos, DTLayerId::layer(), DTChamberId::sector(), DQMStore::IBooker::setCurrentFolder(), DTChamberId::station(), relativeConstraints::station, DTSuperLayerId::superlayer(), DTLayerId::superlayerId(), and DTChamberId::wheel().

                                                                                                                    {
 
   ibooker.setCurrentFolder("DT/DTEfficiencyTask");
 
   cout<<"[DTTestPulseTask]: booking"<<endl;
 
 
   //here put the static booking loop
 
  // Loop over all the chambers
   vector<const DTChamber*>::const_iterator ch_it = muonGeom->chambers().begin();
   vector<const DTChamber*>::const_iterator ch_end = muonGeom->chambers().end();
 
   for (; ch_it != ch_end; ++ch_it) {
 
     // Loop over the SLs
     vector<const DTSuperLayer*>::const_iterator sl_it = (*ch_it)->superLayers().begin();
     vector<const DTSuperLayer*>::const_iterator sl_end = (*ch_it)->superLayers().end();
 
     for(; sl_it != sl_end; ++sl_it) {
     DTSuperLayerId sl = (*sl_it)->id();
     stringstream superLayer; superLayer << sl.superlayer();
 
     // Loop over the Ls
     vector<const DTLayer*>::const_iterator l_it = (*sl_it)->layers().begin();
     vector<const DTLayer*>::const_iterator l_end = (*sl_it)->layers().end();
 
     for(; l_it != l_end; ++l_it) {
 
       DTLayerId layerId = (*l_it)->id();
           if(debug) cout << "   Booking histos for L: " << layerId << endl;
 
   // Compose the chamber name
       stringstream layer; layer << layerId.layer();
           stringstream superLayer; superLayer << layerId.superlayer();
           stringstream station; station << layerId.superlayerId().chamberId().station();
           stringstream sector; sector << layerId.superlayerId().chamberId().sector();
           stringstream wheel; wheel << layerId.superlayerId().chamberId().wheel();
 
           const int firstWire = (*l_it)->specificTopology().firstChannel();
           const int lastWire = (*l_it)->specificTopology().lastChannel();
 
           string lHistoName =
               "_W" + wheel.str() +
               "_St" + station.str() +
               "_Sec" + sector.str() +
               "_SL" + superLayer.str()+
               "_L" + layer.str();
 
           ibooker.setCurrentFolder("DT/DTEfficiencyTask/Wheel" + wheel.str() +
                "/Station" + station.str() +
                "/Sector" + sector.str() +
                "/SuperLayer" +superLayer.str());
 
 
           // Create the monitor elements
           vector<MonitorElement *> histos;
           // histo for hits associated to the 4D reconstructed segment
           histos.push_back(ibooker.book1D(
            "hEffOccupancy"+lHistoName, "4D segments recHits occupancy",lastWire-firstWire+1, firstWire-0.5, lastWire+0.5));
           // histo for hits not associated to the segment
           histos.push_back(ibooker.book1D(
             "hEffUnassOccupancy"+lHistoName, "4D segments recHits and Hits not associated occupancy",
             lastWire-firstWire+1, firstWire-0.5, lastWire+0.5));
           // histo for cells associated to the 4D reconstructed segment
            histos.push_back(ibooker.book1D(
             "hRecSegmOccupancy"+lHistoName, "4D segments cells occupancy",lastWire-firstWire+1, firstWire-0.5, lastWire+0.5));
 
           histosPerL[layerId] = histos;
 
     } // layer
     } // superlayer
   } // chambers
 }

void DTEfficiencyTask::dqmBeginRun	(	const edm::Run &	run,
		const edm::EventSetup &	context
	)

protectedvirtual

BeginRun.

Reimplemented from DQMEDAnalyzer.

Definition at line 54 of file DTEfficiencyTask.cc.

References edm::EventSetup::get().

                                                                                   {
 
   // Get the geometry
   context.get<MuonGeometryRecord>().get(muonGeom);
 
 }

void DTEfficiencyTask::fillHistos	(	DTLayerId	lId,
		int	firstWire,
		int	lastWire,
		int	numWire
	)

private

Definition at line 440 of file DTEfficiencyTask.cc.

References mergeVDriftHistosByStation::histos.

                                {
 
   vector<MonitorElement *> histos =  histosPerL[lId];
   histos[0]->Fill(numWire);
   histos[1]->Fill(numWire);
   histos[2]->Fill(numWire);
 }

void DTEfficiencyTask::fillHistos	(	DTLayerId	lId,
		int	firstWire,
		int	lastWire,
		int	missingWire,
		bool	UnassHit
	)

private

Definition at line 451 of file DTEfficiencyTask.cc.

References mergeVDriftHistosByStation::histos.

                                  {
 
  vector<MonitorElement *> histos =  histosPerL[lId];
  if(unassHit)
    histos[1]->Fill(missingWire);
    histos[2]->Fill(missingWire);
 }