L1StartupConfig_cff.py

Go to the documentation of this file.

from L1Trigger.Configuration.L1DummyConfig_cff import *

# RCT EM
RCTConfigProducers.eGammaLSB = cms.double(0.25)
l1CaloScales.L1CaloEmEtScaleLSB = cms.double(0.25)
l1CaloScales.L1CaloEmThresholds = cms.vdouble(
        0.0, 0.5, 1.0, 1.5, 2.0, 
        2.5, 3.0, 3.5, 4.0, 4.5,
        5.0, 5.5, 6.0, 6.5, 7.0, 
        7.5, 8.0, 8.5, 9.0, 9.5,
        10.0, 10.5, 11.0, 11.5, 12.0, 
        12.5, 13.0, 13.5, 14.0, 14.5,
        15.0, 15.5, 16.0, 16.5, 17.0, 
        17.5, 18.0, 18.5, 19.0, 19.5,
        20.0, 20.5, 21.0, 21.5, 22.0, 
        22.5, 23.0, 23.5, 24.0, 24.5,
        25.0, 25.5, 26.0, 26.5, 27.0, 
        27.5, 28.0, 28.5, 29.0, 29.5,
        30.0, 30.5, 31.0, 31.5)

# RCT Regions
RCTConfigProducers.jetMETLSB = cms.double(0.25)
l1CaloScales.L1CaloRegionEtScaleLSB = cms.double(0.25)

# GCT jet finding params
L1GctConfigProducers.JetFinderCentralJetSeed = cms.double(0)
L1GctConfigProducers.JetFinderForwardJetSeed = cms.double(0)
L1GctConfigProducers.L1CaloJetZeroSuppressionThresholdInGeV = cms.double(0.0)
L1GctConfigProducers.RctRegionEtLSB = cms.double(0.25)
L1GctConfigProducers.GctHtLSB = cms.double(0.25)

# GCT jet corrections
L1GctConfigProducers.CalibrationStyle = cms.string('PowerSeries')
L1GctConfigProducers.PowerSeriesCoefficients = cms.PSet(
        nonTauJetCalib0 = cms.vdouble( 0.0 ),
        nonTauJetCalib1 = cms.vdouble( 0.0 ),
        nonTauJetCalib2 = cms.vdouble( 0.0 ),
        nonTauJetCalib3 = cms.vdouble( 0.0 ),
        nonTauJetCalib4 = cms.vdouble( 0.0 ),
        nonTauJetCalib5 = cms.vdouble( 0.0 ),
        nonTauJetCalib6 = cms.vdouble( 0.0 ),
        nonTauJetCalib7 = cms.vdouble( 0.0 ),
        nonTauJetCalib8 = cms.vdouble( 0.0 ),
        nonTauJetCalib9 = cms.vdouble( 0.0 ),
        nonTauJetCalib10 = cms.vdouble( 0.0 ),
        tauJetCalib0 = cms.vdouble( 0.0 ),
        tauJetCalib1 = cms.vdouble( 0.0 ),
        tauJetCalib2 = cms.vdouble( 0.0 ),
        tauJetCalib3 = cms.vdouble( 0.0 ),
        tauJetCalib4 = cms.vdouble( 0.0 ),
        tauJetCalib5 = cms.vdouble( 0.0 ),
        tauJetCalib6 = cms.vdouble( 0.0 ),
)

# GCT jet output scale
l1CaloScales.L1CaloJetThresholds = cms.vdouble(
    0.0, 2.0, 4.0, 6.0, 8.0,
    10.0, 12.0, 14.0, 16.0, 18.0,
    20.0, 22.0, 24.0, 26.0, 28.0,
    30.0, 32.0, 34.0, 36.0, 38.0,
    40.0, 42.0, 44.0, 46.0, 48.0,
    50.0, 52.0, 54.0, 56.0, 58.0,
    60.0, 62.0, 64.0, 66.0, 68.0,
    70.0, 72.0, 74.0, 76.0, 78.0,
    80.0, 82.0, 84.0, 86.0, 88.0,
    90.0, 92.0, 94.0, 96.0, 98.0,
    100.0, 102.0, 104.0, 106.0, 108.0,
    110.0, 112.0, 114.0, 116.0, 118.0,
    120.0, 122.0, 124.0, 126.0)

# GCT HF ring sum scale
l1CaloScales.L1HfRingThresholds = cms.vdouble(0.0, 2.0, 3.0, 4.0, 6.0, 50., 200., 500.)