Phase1PU70_HighPtTripletStep_cff.py

Go to the documentation of this file.

### who is using this python file ?
### I found it obsolete, at least in terms of the TrackClusterRemover setting
### now, it is ok, but ....
import FWCore.ParameterSet.Config as cms

# NEW CLUSTERS (remove previously used clusters)
from RecoLocalTracker.SubCollectionProducers.trackClusterRemover_cfi import *
highPtTripletStepClusters = trackClusterRemover.clone(
    maxChi2                                  = cms.double(9.0),
    trajectories                             = cms.InputTag("initialStepTracks"),
    pixelClusters                            = cms.InputTag("siPixelClusters"),
    stripClusters                            = cms.InputTag("siStripClusters"),
    overrideTrkQuals                         = cms.InputTag('initialStepSelector','initialStep'),
    TrackQuality                             = cms.string('highPurity'),
    minNumberOfLayersWithMeasBeforeFiltering = cms.int32(0),
)

# SEEDING LAYERS
import RecoTracker.TkSeedingLayers.PixelLayerTriplets_cfi
highPtTripletStepSeedLayers = RecoTracker.TkSeedingLayers.PixelLayerTriplets_cfi.PixelLayerTriplets.clone(
    layerList = cms.vstring('BPix1+BPix2+BPix3', 'BPix2+BPix3+BPix4',
                            'BPix1+BPix3+BPix4', 'BPix1+BPix2+BPix4',
                            'BPix2+BPix3+FPix1_pos', 'BPix2+BPix3+FPix1_neg',
                            'BPix1+BPix2+FPix1_pos', 'BPix1+BPix2+FPix1_neg',
                            'BPix1+BPix3+FPix1_pos', 'BPix1+BPix3+FPix1_neg',
                            'BPix2+FPix1_pos+FPix2_pos', 'BPix2+FPix1_neg+FPix2_neg',
                            'BPix1+FPix1_pos+FPix2_pos', 'BPix1+FPix1_neg+FPix2_neg',
                            'BPix1+BPix2+FPix2_pos', 'BPix1+BPix2+FPix2_neg',
                            'FPix1_pos+FPix2_pos+FPix3_pos', 'FPix1_neg+FPix2_neg+FPix3_neg',
                            'BPix1+FPix2_pos+FPix3_pos', 'BPix1+FPix2_neg+FPix3_neg',
                            'BPix1+FPix1_pos+FPix3_pos', 'BPix1+FPix1_neg+FPix3_neg')
    )
highPtTripletStepSeedLayers.BPix.skipClusters = cms.InputTag('highPtTripletStepClusters')
highPtTripletStepSeedLayers.FPix.skipClusters = cms.InputTag('highPtTripletStepClusters')

# SEEDS
import RecoTracker.TkSeedGenerator.GlobalSeedsFromTriplets_cff
from RecoTracker.TkTrackingRegions.GlobalTrackingRegionFromBeamSpot_cfi import RegionPsetFomBeamSpotBlock
highPtTripletStepSeeds = RecoTracker.TkSeedGenerator.GlobalSeedsFromTriplets_cff.globalSeedsFromTriplets.clone(
    RegionFactoryPSet = RegionPsetFomBeamSpotBlock.clone(
    ComponentName = cms.string('GlobalRegionProducerFromBeamSpot'),
    RegionPSet = RegionPsetFomBeamSpotBlock.RegionPSet.clone(
    ptMin = 0.7,
    originRadius = 0.02,
    nSigmaZ = 4.0
    )
    )
    )
highPtTripletStepSeeds.OrderedHitsFactoryPSet.SeedingLayers = 'highPtTripletStepSeedLayers'
highPtTripletStepSeeds.SeedCreatorPSet.magneticField = ''
highPtTripletStepSeeds.SeedCreatorPSet.propagator = 'PropagatorWithMaterial'

from RecoPixelVertexing.PixelLowPtUtilities.ClusterShapeHitFilterESProducer_cfi import *
import RecoPixelVertexing.PixelLowPtUtilities.LowPtClusterShapeSeedComparitor_cfi
highPtTripletStepSeeds.OrderedHitsFactoryPSet.GeneratorPSet.SeedComparitorPSet = RecoPixelVertexing.PixelLowPtUtilities.LowPtClusterShapeSeedComparitor_cfi.LowPtClusterShapeSeedComparitor
highPtTripletStepSeeds.ClusterCheckPSet.doClusterCheck = cms.bool(False)
highPtTripletStepSeeds.OrderedHitsFactoryPSet.GeneratorPSet.maxElement = cms.uint32(0)

# QUALITY CUTS DURING TRACK BUILDING
import TrackingTools.TrajectoryFiltering.TrajectoryFilter_cff
highPtTripletStepTrajectoryFilter = TrackingTools.TrajectoryFiltering.TrajectoryFilter_cff.CkfBaseTrajectoryFilter_block.clone(
    minimumNumberOfHits = 3,
    minPt = 0.2
    )

import TrackingTools.KalmanUpdators.Chi2MeasurementEstimatorESProducer_cfi
highPtTripletStepChi2Est = TrackingTools.KalmanUpdators.Chi2MeasurementEstimatorESProducer_cfi.Chi2MeasurementEstimator.clone(
    ComponentName = cms.string('highPtTripletStepChi2Est'),
    nSigma = cms.double(3.0),
    MaxChi2 = cms.double(30.0)
)

# TRACK BUILDING
import RecoTracker.CkfPattern.GroupedCkfTrajectoryBuilder_cfi
highPtTripletStepTrajectoryBuilder = RecoTracker.CkfPattern.GroupedCkfTrajectoryBuilder_cfi.GroupedCkfTrajectoryBuilder.clone(
    MeasurementTrackerName = '',
    trajectoryFilter = cms.PSet(refToPSet_ = cms.string('highPtTripletStepTrajectoryFilter')),
    maxCand = 4,
    estimator = cms.string('highPtTripletStepChi2Est'),
    maxDPhiForLooperReconstruction = cms.double(2.0),
    # 0.63 GeV is the maximum pT for a charged particle to loop within the 1.1m radius
    # of the outermost Tracker barrel layer (with B=3.8T)
    maxPtForLooperReconstruction = cms.double(0.7) 
    )

# MAKING OF TRACK CANDIDATES
import RecoTracker.CkfPattern.CkfTrackCandidates_cfi
highPtTripletStepTrackCandidates = RecoTracker.CkfPattern.CkfTrackCandidates_cfi.ckfTrackCandidates.clone(
    src = cms.InputTag('highPtTripletStepSeeds'),
    clustersToSkip = cms.InputTag('highPtTripletStepClusters'),
    ### these two parameters are relevant only for the CachingSeedCleanerBySharedInput
    numHitsForSeedCleaner = cms.int32(50),
    onlyPixelHitsForSeedCleaner = cms.bool(True),
    TrajectoryBuilderPSet = cms.PSet(refToPSet_ = cms.string('highPtTripletStepTrajectoryBuilder')),
    doSeedingRegionRebuilding = True,
    useHitsSplitting = True
)

# TRACK FITTING
import RecoTracker.TrackProducer.TrackProducer_cfi
highPtTripletStepTracks = RecoTracker.TrackProducer.TrackProducer_cfi.TrackProducer.clone(
    src = 'highPtTripletStepTrackCandidates',
    # Algorithm name changed from highPtTripletStep (was iter1) to lowPtTripletStep in order
    # to keep backward compatibility as detachedQuadStep would be unknown.
    # In the future, a new enum or alias may be added to support iteration name aliases.
    AlgorithmName = cms.string('lowPtTripletStep'),
    Fitter = cms.string('FlexibleKFFittingSmoother'),
    TTRHBuilder=cms.string('WithTrackAngle')
    )

from TrackingTools.TrajectoryCleaning.TrajectoryCleanerBySharedHits_cfi import trajectoryCleanerBySharedHits
highPtTripletStepTrajectoryCleanerBySharedHits = trajectoryCleanerBySharedHits.clone(
        ComponentName = cms.string('highPtTripletStepTrajectoryCleanerBySharedHits'),
            fractionShared = cms.double(0.16),
            allowSharedFirstHit = cms.bool(True)
            )
highPtTripletStepTrackCandidates.TrajectoryCleaner = 'highPtTripletStepTrajectoryCleanerBySharedHits'

# Final selection
import RecoTracker.FinalTrackSelectors.multiTrackSelector_cfi
highPtTripletStepSelector = RecoTracker.FinalTrackSelectors.multiTrackSelector_cfi.multiTrackSelector.clone(
    src='highPtTripletStepTracks',
    trackSelectors= cms.VPSet(
        RecoTracker.FinalTrackSelectors.multiTrackSelector_cfi.looseMTS.clone(
            name = 'highPtTripletStepLoose',
            chi2n_par = 2.0,
            res_par = ( 0.003, 0.002 ),
            minNumberLayers = 3,
            maxNumberLostLayers = 3,
            minNumber3DLayers = 3,
            d0_par1 = ( 0.7, 4.0 ),
            dz_par1 = ( 0.8, 4.0 ),
            d0_par2 = ( 0.4, 4.0 ),
            dz_par2 = ( 0.6, 4.0 )
            ), #end of pset
        RecoTracker.FinalTrackSelectors.multiTrackSelector_cfi.tightMTS.clone(
            name = 'highPtTripletStepTight',
            preFilterName = 'highPtTripletStepLoose',
            chi2n_par = 1.0,
            res_par = ( 0.003, 0.002 ),
            minNumberLayers = 3,
            maxNumberLostLayers = 2,
            minNumber3DLayers = 3,
            d0_par1 = ( 0.6, 4.0 ),
            dz_par1 = ( 0.7, 4.0 ),
            d0_par2 = ( 0.35, 4.0 ),
            dz_par2 = ( 0.5, 4.0 )
            ),
        RecoTracker.FinalTrackSelectors.multiTrackSelector_cfi.highpurityMTS.clone(
            name = 'highPtTripletStep',
            preFilterName = 'highPtTripletStepTight',
            chi2n_par = 0.7,
            res_par = ( 0.003, 0.001 ),
            minNumberLayers = 3,
            maxNumberLostLayers = 2,
            minNumber3DLayers = 3,
            d0_par1 = ( 0.5, 4.0 ),
            dz_par1 = ( 0.7, 4.0 ),
            d0_par2 = ( 0.25, 4.0 ),
            dz_par2 = ( 0.4, 4.0 )
            ),
        ) #end of vpset
    ) #end of clone

# Final sequence
HighPtTripletStep = cms.Sequence(highPtTripletStepClusters*
                                highPtTripletStepSeedLayers*
                                highPtTripletStepSeeds*
                                highPtTripletStepTrackCandidates*
                                highPtTripletStepTracks*
                                highPtTripletStepSelector)