define MonitorEnsembple to be used More...

#include <TopDiLeptonOfflineDQM.h>

Inheritance diagram for TopDiLeptonOfflineDQM:

Public Member Functions
virtual void	analyze (const edm::Event &event, const edm::EventSetup &setup)
	do this during the event loop More...

	TopDiLeptonOfflineDQM (const edm::ParameterSet &cfg)
	default constructor More...

	~TopDiLeptonOfflineDQM ()
	default destructor More...

Public Member Functions inherited from DQMEDAnalyzer
virtual void	beginRun (edm::Run const &, edm::EventSetup const &) final

virtual void	beginStream (edm::StreamID id) final

virtual void	dqmBeginRun (edm::Run const &, edm::EventSetup const &)

	DQMEDAnalyzer (void)

virtual void	endLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, dqmDetails::NoCache *) const final

virtual void	endRunSummary (edm::Run const &, edm::EventSetup const &, dqmDetails::NoCache *) const final

uint32_t	streamId () const

Public Member Functions inherited from edm::stream::EDAnalyzer< edm::RunSummaryCache< dqmDetails::NoCache >, edm::LuminosityBlockSummaryCache< dqmDetails::NoCache > >
	EDAnalyzer ()=default

Public Member Functions inherited from edm::stream::EDAnalyzerBase
	EDAnalyzerBase ()

ModuleDescription const &	moduleDescription () const

virtual	~EDAnalyzerBase ()

Public Member Functions inherited from edm::EDConsumerBase
	EDConsumerBase ()

ProductHolderIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const

void	itemsMayGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

void	itemsToGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

std::vector < ProductHolderIndexAndSkipBit > const &	itemsToGetFromEvent () const

void	labelsForToken (EDGetToken iToken, Labels &oLabels) const

void	modulesDependentUpon (const std::string &iProcessName, std::vector< const char * > &oModuleLabels) const

bool	registeredToConsume (ProductHolderIndex, bool, BranchType) const

bool	registeredToConsumeMany (TypeID const &, BranchType) const

void	updateLookup (BranchType iBranchType, ProductHolderIndexHelper const &)

virtual	~EDConsumerBase ()

Protected Member Functions
void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override

Protected Member Functions inherited from edm::stream::EDAnalyzerBase
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)

Protected Member Functions inherited from edm::EDConsumerBase
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)

EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)

ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...

template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()

void	consumesMany (const TypeToGet &id)

template<BranchType B>
void	consumesMany (const TypeToGet &id)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)

EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

Private Member Functions
std::string	objectType (const std::string &label)

std::string	selectionStep (const std::string &label)

Private Attributes
edm::EDGetTokenT< reco::BeamSpot >	beamspot_
	beamspot More...

std::unique_ptr < StringCutObjectSelector < reco::BeamSpot > >	beamspotSelect_
	string cut selector More...

std::vector< std::unique_ptr < SelectionStep< reco::CaloJet > > >	CaloJetSteps

std::unique_ptr< SelectionStep < reco::PFCandidate > >	ElectronStep

std::vector< std::unique_ptr < SelectionStep< reco::Jet > > >	JetSteps

std::unique_ptr< SelectionStep < reco::MET > >	METStep

std::unique_ptr< SelectionStep < reco::PFCandidate > >	MuonStep

std::vector< std::unique_ptr < SelectionStep< reco::PFJet > > >	PFJetSteps

std::unique_ptr< SelectionStep < reco::Vertex > >	PvStep

std::vector< edm::ParameterSet >	sel_

std::map< std::string, std::pair< edm::ParameterSet, std::unique_ptr < TopDiLeptonOffline::MonitorEnsemble > > >	selection_

std::vector< std::string >	selectionOrder_

edm::ParameterSet	setup_

std::vector< std::string >	triggerPaths_
	trigger paths More...

edm::EDGetTokenT < edm::TriggerResults >	triggerTable_
	trigger table More...

edm::EDGetTokenT< std::vector < reco::Vertex > >	vertex_
	primary vertex More...

std::unique_ptr < StringCutObjectSelector < reco::Vertex > >	vertexSelect_
	string cut selector More...

Additional Inherited Members
Public Types inherited from edm::stream::EDAnalyzer< edm::RunSummaryCache< dqmDetails::NoCache >, edm::LuminosityBlockSummaryCache< dqmDetails::NoCache > >
typedef CacheContexts< T...>	CacheTypes

typedef CacheTypes::GlobalCache	GlobalCache

typedef AbilityChecker< T...>	HasAbility

typedef CacheTypes::LuminosityBlockCache	LuminosityBlockCache

typedef LuminosityBlockContextT < LuminosityBlockCache, RunCache, GlobalCache >	LuminosityBlockContext

typedef CacheTypes::LuminosityBlockSummaryCache	LuminosityBlockSummaryCache

typedef CacheTypes::RunCache	RunCache

typedef RunContextT< RunCache, GlobalCache >	RunContext

typedef CacheTypes::RunSummaryCache	RunSummaryCache

Public Types inherited from edm::stream::EDAnalyzerBase
typedef EDAnalyzerAdaptorBase	ModuleType

Static Public Member Functions inherited from DQMEDAnalyzer
static std::shared_ptr < dqmDetails::NoCache >	globalBeginLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, LuminosityBlockContext const *)

static std::shared_ptr < dqmDetails::NoCache >	globalBeginRunSummary (edm::Run const &, edm::EventSetup const &, RunContext const *)

static void	globalEndLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, LuminosityBlockContext const , dqmDetails::NoCache )

static void	globalEndRunSummary (edm::Run const &, edm::EventSetup const &, RunContext const , dqmDetails::NoCache )

Static Public Member Functions inherited from edm::stream::EDAnalyzerBase
static const std::string &	baseType ()

static void	fillDescriptions (ConfigurationDescriptions &descriptions)

static void	prevalidate (ConfigurationDescriptions &descriptions)

Detailed Description

define MonitorEnsembple to be used

Module to apply a monitored selection of top like events in the di-leptonic channel.

"DQM/Physics/plugins/TopDiLeptonOfflineDQM.h"

Plugin to apply a monitored selection of top like events with some minimal flexibility in the number and definition of the selection steps. To achieve this flexibility it employes the SelectionStep class. The MonitorEnsemble class is used to provide a well defined set of histograms to be monitored after each selection step. The SelectionStep class provides a flexible and intuitive selection via the StringCutParser. SelectionStep and MonitorEnsemble classes are interleaved. The monitoring starts after a preselection step (which is not monitored in the context of this module) with an instance of the MonitorEnsemble class. The following objects are supported for selection:

jets : of type reco::Jet
elecs : of type reco::PFCandidate
muons : of type reco::PFCandidate
met : of type reco::MET

These types have to be present as prefix of the selection step paramter label separated from the rest of the label by a ':' (e.g. in the form "jets:step0"). The class expects selection labels of this type. They will be disentangled by the private helper functions objectType and seletionStep as declared below.

Definition at line 323 of file TopDiLeptonOfflineDQM.h.

Constructor & Destructor Documentation

TopDiLeptonOfflineDQM::TopDiLeptonOfflineDQM ( const edm::ParameterSet & cfg )

default constructor

Definition at line 767 of file TopDiLeptonOfflineDQM.cc.

References beamspot_, beamspotSelect_, CaloJetSteps, edm::EDConsumerBase::consumesCollector(), ElectronStep, edm::ParameterSet::existsAs(), first, edm::ParameterSet::getParameter(), i, JetSteps, combine::key, METStep, MuonStep, objectType(), PFJetSteps, PvStep, sel_, selection_, selectionOrder_, selectionStep(), setup_, AlCaHLTBitMon_QueryRunRegistry::string, triggerPaths_, triggerTable_, vertex_, and vertexSelect_.

     : vertexSelect_(nullptr),
       beamspotSelect_(nullptr),
       MuonStep(nullptr),
       ElectronStep(nullptr),
       PvStep(nullptr),
       METStep(nullptr) {
   JetSteps.clear();
   CaloJetSteps.clear();
   PFJetSteps.clear();
   // configure the preselection
   edm::ParameterSet presel =
       cfg.getParameter<edm::ParameterSet>("preselection");
   if (presel.existsAs<edm::ParameterSet>("trigger")) {
     edm::ParameterSet trigger =
         presel.getParameter<edm::ParameterSet>("trigger");
     //    triggerTable_=trigger.getParameter<edm::InputTag>("src");
     triggerTable_ = consumes<edm::TriggerResults>(
         trigger.getParameter<edm::InputTag>("src"));
     triggerPaths_ = trigger.getParameter<std::vector<std::string> >("select");
   }
   if (presel.existsAs<edm::ParameterSet>("vertex")) {
     edm::ParameterSet vertex = presel.getParameter<edm::ParameterSet>("vertex");
     vertex_ = consumes<std::vector<reco::Vertex> >(
         vertex.getParameter<edm::InputTag>("src"));
     vertexSelect_.reset(new StringCutObjectSelector<reco::Vertex>(
         vertex.getParameter<std::string>("select")));
   }
   if (presel.existsAs<edm::ParameterSet>("beamspot")) {
     edm::ParameterSet beamspot =
         presel.getParameter<edm::ParameterSet>("beamspot");
     beamspot_ =
         consumes<reco::BeamSpot>(beamspot.getParameter<edm::InputTag>("src"));
     beamspotSelect_.reset(new StringCutObjectSelector<reco::BeamSpot>(
         beamspot.getParameter<std::string>("select")));
   }
 
   // conifgure the selection
   sel_ =
       cfg.getParameter<std::vector<edm::ParameterSet> >("selection");
   setup_ = cfg.getParameter<edm::ParameterSet>("setup");
   for (unsigned int i = 0; i < sel_.size(); ++i) {
     selectionOrder_.push_back(sel_.at(i).getParameter<std::string>("label"));
     selection_[selectionStep(selectionOrder_.back())] = std::make_pair(
         sel_.at(i),
         std::unique_ptr<TopDiLeptonOffline::MonitorEnsemble>(
         new TopDiLeptonOffline::MonitorEnsemble(
             selectionStep(selectionOrder_.back()).c_str(),
             setup_, consumesCollector())));
   }
   for (std::vector<std::string>::const_iterator selIt = selectionOrder_.begin();
        selIt != selectionOrder_.end(); ++selIt) {
     std::string key = selectionStep(*selIt), type = objectType(*selIt);
     if (selection_.find(key) != selection_.end()) {
       if (type == "muons") {
         MuonStep.reset(new SelectionStep<reco::PFCandidate>(selection_[key].first,
             consumesCollector()));
       }
       if (type == "elecs") {
         ElectronStep.reset(new SelectionStep<reco::PFCandidate>(
             selection_[key].first, consumesCollector()));
       }
       if (type == "pvs") {
         PvStep.reset(new SelectionStep<reco::Vertex>(selection_[key].first,
             consumesCollector()));
       }
       if (type == "jets") {
         JetSteps.push_back(std::unique_ptr<SelectionStep<reco::Jet>>(
             new SelectionStep<reco::Jet>(selection_[key].first,
             consumesCollector())));
       }
       if (type == "jets/pf") {
         PFJetSteps.push_back(std::unique_ptr<SelectionStep<reco::PFJet>>(
             new SelectionStep<reco::PFJet>(
             selection_[key].first, consumesCollector())));
       }
       if (type == "jets/calo") {
         CaloJetSteps.push_back(std::unique_ptr<SelectionStep<reco::CaloJet>>(
             new SelectionStep<reco::CaloJet>(
             selection_[key].first, consumesCollector())));
       }
       if (type == "met") {
         METStep.reset(new SelectionStep<reco::MET>(selection_[key].first,
             consumesCollector()));
       }
     }
   }
 }

TopDiLeptonOfflineDQM::~TopDiLeptonOfflineDQM ( )

inline

default destructor

Definition at line 328 of file TopDiLeptonOfflineDQM.h.

328 {}

Member Function Documentation

void TopDiLeptonOfflineDQM::analyze	(	const edm::Event &	event,
		const edm::EventSetup &	setup
	)

virtual

do this during the event loop

Implements edm::stream::EDAnalyzerBase.

Definition at line 863 of file TopDiLeptonOfflineDQM.cc.

References accept(), beamspot_, beamspotSelect_, CaloJetSteps, ElectronStep, edm::Event::getByToken(), edm::EDGetTokenT< T >::isUninitialized(), JetSteps, combine::key, METStep, MuonStep, NULL, objectType(), PFJetSteps, benchmark_cfg::select, selection_, selectionOrder_, selectionStep(), AlCaHLTBitMon_QueryRunRegistry::string, triggerPaths_, triggerTable_, and vertex_.

                                                                 {
   if (!triggerTable_.isUninitialized()) {
     edm::Handle<edm::TriggerResults> triggerTable;
     if (!event.getByToken(triggerTable_, triggerTable)) return;
     if (!accept(event, *triggerTable, triggerPaths_)) return;
   }
   if (!vertex_.isUninitialized()) {
     edm::Handle<std::vector<reco::Vertex> > vertex;
     if (!event.getByToken(vertex_, vertex)) return;
     if (vertex->empty() || !(*vertexSelect_)(vertex->front())) return;
   }
   if (!beamspot_.isUninitialized()) {
     edm::Handle<reco::BeamSpot> beamspot;
     if (!event.getByToken(beamspot_, beamspot)) return;
     if (!(*beamspotSelect_)(*beamspot)) return;
   }
   unsigned int passed = 0;
 
   unsigned int nJetSteps = -1;
 
   unsigned int nPFJetSteps = -1;
 
   unsigned int nCaloJetSteps = -1;
   // apply selection steps
   for (std::vector<std::string>::const_iterator selIt = selectionOrder_.begin();
        selIt != selectionOrder_.end(); ++selIt) {
     std::string key = selectionStep(*selIt), type = objectType(*selIt);
     if (selection_.find(key) != selection_.end()) {
       if (type == "empty") {
         selection_[key].second->fill(event, setup);
       }
       if (type == "muons" && MuonStep != 0) {
         if (MuonStep->select(event)) {
           ++passed;
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
       if (type == "elecs" && ElectronStep != 0) {
         if (ElectronStep->select(event, "electron")) {
           ++passed;
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
       if (type == "jets" && JetSteps.size() != 0) {
         nJetSteps++;
         if (JetSteps[nJetSteps] != NULL) {
           if (JetSteps[nJetSteps]->select(event, setup)) {
             ++passed;
             selection_[key].second->fill(event, setup);
           } else
             break;
         }
       }
 
       if (type == "jets/pf" && PFJetSteps.size() != 0) {
         nPFJetSteps++;
         if (PFJetSteps[nPFJetSteps] != NULL) {
           if (PFJetSteps[nPFJetSteps]->select(event, setup)) {
             ++passed;
             selection_[key].second->fill(event, setup);
           } else
             break;
         }
       }
 
       if (type == "jets/calo" && CaloJetSteps.size() != 0) {
         nCaloJetSteps++;
         if (CaloJetSteps[nCaloJetSteps] != NULL) {
           if (CaloJetSteps[nCaloJetSteps]->select(event, setup)) {
             ++passed;
             selection_[key].second->fill(event, setup);
           } else
             break;
         }
       }
 
       if (type == "met" && METStep != 0) {
         ++passed;
         if (METStep->select(event)) {
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
     }
   }
 }

void TopDiLeptonOfflineDQM::bookHistograms	(	DQMStore::IBooker &	ibooker,
		edm::Run const &	,
		edm::EventSetup const &
	)

overrideprotectedvirtual

Implements DQMEDAnalyzer.

Definition at line 856 of file TopDiLeptonOfflineDQM.cc.

References selection_.

                                          {
 
   for (auto selIt = selection_.begin(); selIt != selection_.end(); ++selIt) {
     selIt->second.second->book(ibooker);
   }
 }

std::string TopDiLeptonOfflineDQM::objectType ( const std::string & label )

inlineprivate

deduce object type from ParameterSet label, the label is expected to be of type 'objectType:selectionStep'

Definition at line 341 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

                                                {
     return label.substr(0, label.find(':'));
   };

std::string TopDiLeptonOfflineDQM::selectionStep ( const std::string & label )

inlineprivate

deduce selection step from ParameterSet label, the label is expected to be of type 'objectType:selectionStep'

Definition at line 346 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

                                                   {
     return label.substr(label.find(':') + 1);
   };

Member Data Documentation

edm::EDGetTokenT<reco::BeamSpot> TopDiLeptonOfflineDQM::beamspot_

private

beamspot

Definition at line 360 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

std::unique_ptr<StringCutObjectSelector<reco::BeamSpot> > TopDiLeptonOfflineDQM::beamspotSelect_

private

string cut selector

Definition at line 362 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

std::vector<std::unique_ptr<SelectionStep<reco::CaloJet> > > TopDiLeptonOfflineDQM::CaloJetSteps

private

Definition at line 380 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

std::unique_ptr<SelectionStep<reco::PFCandidate> > TopDiLeptonOfflineDQM::ElectronStep

private

Definition at line 376 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

std::vector<std::unique_ptr<SelectionStep<reco::Jet> > > TopDiLeptonOfflineDQM::JetSteps

private

Definition at line 379 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

std::unique_ptr<SelectionStep<reco::MET> > TopDiLeptonOfflineDQM::METStep

private

Definition at line 378 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

std::unique_ptr<SelectionStep<reco::PFCandidate> > TopDiLeptonOfflineDQM::MuonStep

private

Definition at line 375 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

std::vector<std::unique_ptr<SelectionStep<reco::PFJet> > > TopDiLeptonOfflineDQM::PFJetSteps

private

Definition at line 381 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

std::unique_ptr<SelectionStep<reco::Vertex> > TopDiLeptonOfflineDQM::PvStep

private

Definition at line 377 of file TopDiLeptonOfflineDQM.h.

Referenced by TopDiLeptonOfflineDQM().

std::vector<edm::ParameterSet> TopDiLeptonOfflineDQM::sel_

private

Definition at line 383 of file TopDiLeptonOfflineDQM.h.

Referenced by TopDiLeptonOfflineDQM().

std::map<std::string, std::pair<edm::ParameterSet, std::unique_ptr<TopDiLeptonOffline::MonitorEnsemble > > > TopDiLeptonOfflineDQM::selection_

private

this is the heart component of the plugin; std::string keeps a label the selection step for later identification, edm::ParameterSet keeps the configuration of the selection for the SelectionStep class, MonitoringEnsemble keeps an instance of the MonitorEnsemble class to be filled after each selection step

Definition at line 374 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), bookHistograms(), and TopDiLeptonOfflineDQM().

std::vector<std::string> TopDiLeptonOfflineDQM::selectionOrder_

private

needed to guarantee the selection order as defined by the order of ParameterSets in the selection vector as defined in the config

Definition at line 366 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

edm::ParameterSet TopDiLeptonOfflineDQM::setup_

private

Definition at line 384 of file TopDiLeptonOfflineDQM.h.

Referenced by TopDiLeptonOfflineDQM().

std::vector<std::string> TopDiLeptonOfflineDQM::triggerPaths_