#include <PixelTripletLargeTipGenerator.h>

Inheritance diagram for PixelTripletLargeTipGenerator:

Public Member Functions
virtual void	hitTriplets (const TrackingRegion &region, OrderedHitTriplets &trs, const edm::Event &ev, const edm::EventSetup &es)

void	init (const HitPairGenerator &pairs, LayerCacheType *layerCache) override

const HitPairGenerator &	pairGenerator () const

	PixelTripletLargeTipGenerator (const edm::ParameterSet &cfg, edm::ConsumesCollector &iC)

void	setSeedingLayers (SeedingLayerSetsHits::SeedingLayerSet pairLayers, std::vector< SeedingLayerSetsHits::SeedingLayer > thirdLayers) override

virtual	~PixelTripletLargeTipGenerator ()

Public Member Functions inherited from HitTripletGeneratorFromPairAndLayers
virtual	~HitTripletGeneratorFromPairAndLayers ()

Public Member Functions inherited from HitTripletGenerator
virtual void	clear ()

	HitTripletGenerator (unsigned int size=500)

virtual void	hitTriplets (const TrackingRegion &reg, OrderedHitTriplets &prs, const edm::EventSetup &es)

virtual const OrderedHitTriplets &	run (const TrackingRegion &region, const edm::Event &ev, const edm::EventSetup &es)

virtual	~HitTripletGenerator ()

Public Member Functions inherited from OrderedHitsGenerator
	OrderedHitsGenerator ()

virtual	~OrderedHitsGenerator ()

Private Types
typedef CombinedHitTripletGenerator::LayerCacheType	LayerCacheType

Private Member Functions
bool	checkPhiInRange (float phi, float phi1, float phi2) const

std::pair< float, float >	mergePhiRanges (const std::pair< float, float > &r1, const std::pair< float, float > &r2) const

Private Attributes
float	dphi

float	extraHitRPhitolerance

float	extraHitRZtolerance

LayerCacheType *	theLayerCache

std::vector < SeedingLayerSetsHits::SeedingLayer >	theLayers

HitPairGenerator *	thePairGenerator

bool	useBend

bool	useFixedPreFiltering

bool	useMScat

Additional Inherited Members
Public Types inherited from HitTripletGeneratorFromPairAndLayers
typedef LayerHitMapCache	LayerCacheType

Public Attributes inherited from OrderedHitsGenerator
unsigned int	theMaxElement

Detailed Description

A HitTripletGenerator from HitPairGenerator and vector of Layers. The HitPairGenerator provides a set of hit pairs. For each pair the search for compatible hit(s) is done among provided Layers

Definition at line 21 of file PixelTripletLargeTipGenerator.h.

Member Typedef Documentation

typedef CombinedHitTripletGenerator::LayerCacheType PixelTripletLargeTipGenerator::LayerCacheType

private

Definition at line 23 of file PixelTripletLargeTipGenerator.h.

Constructor & Destructor Documentation

PixelTripletLargeTipGenerator::PixelTripletLargeTipGenerator	(	const edm::ParameterSet &	cfg,
		edm::ConsumesCollector &	iC
	)

Definition at line 43 of file PixelTripletLargeTipGenerator.cc.

References dphi, edm::ParameterSet::getParameter(), OrderedHitsGenerator::theMaxElement, and useFixedPreFiltering.

   : thePairGenerator(0),
     theLayerCache(0),
     useFixedPreFiltering(cfg.getParameter<bool>("useFixedPreFiltering")),
     extraHitRZtolerance(cfg.getParameter<double>("extraHitRZtolerance")),
     extraHitRPhitolerance(cfg.getParameter<double>("extraHitRPhitolerance")),
     useMScat(cfg.getParameter<bool>("useMultScattering")),
     useBend(cfg.getParameter<bool>("useBending"))
 {    theMaxElement=cfg.getParameter<unsigned int>("maxElement");
   if (useFixedPreFiltering)
     dphi = cfg.getParameter<double>("phiPreFiltering");
 }

virtual PixelTripletLargeTipGenerator::~PixelTripletLargeTipGenerator ( )

inlinevirtual

Definition at line 28 of file PixelTripletLargeTipGenerator.h.

References thePairGenerator.

28 { delete thePairGenerator; }

PixelTripletLargeTipGenerator::thePairGenerator

HitPairGenerator * thePairGenerator

Definition: PixelTripletLargeTipGenerator.h:48

Member Function Documentation

bool PixelTripletLargeTipGenerator::checkPhiInRange	(	float	phi,
		float	phi1,
		float	phi2
	)		const

private

Definition at line 359 of file PixelTripletLargeTipGenerator.cc.

References M_PI.

Referenced by hitTriplets().

 { while (phi > phi2) phi -= 2. * M_PI;
   while (phi < phi1) phi += 2. * M_PI;
   return phi <= phi2;
 }  

void PixelTripletLargeTipGenerator::hitTriplets	(	const TrackingRegion &	region,
		OrderedHitTriplets &	trs,
		const edm::Event &	ev,
		const edm::EventSetup &	es
	)

virtual

Implements HitTripletGenerator.

Definition at line 83 of file PixelTripletLargeTipGenerator.cc.

References angle(), KDTreeLinkerAlgo< DATA >::build(), checkPhiInRange(), PixelRecoUtilities::curvature(), HitDoublets::detLayer(), HitPairGenerator::doublets(), dphi, relativeConstraints::empty, ev, extraHitRPhitolerance, extraHitRZtolerance, f, first, fnSigmaRZ, Geom::fpi(), Geom::ftwoPi(), edm::EventSetup::get(), i, HitDoublets::inner, DetLayer::isBarrel(), geometryCSVtoXML::line, bookConverter::max, ThirdHitPredictionFromCircle::HelixRZ::maxCurvature(), mergePhiRanges(), min(), nSigmaPhi, nSigmaRZ, TrackingRegion::originRBound(), HitDoublets::outer, p3, PV3DBase< T, PVType, FrameType >::perp(), edm::ESHandle< class >::product(), TrackingRegion::ptMin(), Basic2DVector< T >::r(), CosmicsPD_Skims::radius, KDTreeLinkerAlgo< DATA >::search(), DetLayer::seqNum(), OrderedHitTriplets::size(), findQualityFiles::size, swap(), theLayers, OrderedHitsGenerator::theMaxElement, thePairGenerator, patCandidatesForDimuonsSequences_cff::tracker, useBend, useFixedPreFiltering, useMScat, findQualityFiles::v, PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

 { 
   edm::ESHandle<TrackerGeometry> tracker;
   es.get<TrackerDigiGeometryRecord>().get(tracker);
 
   //Retrieve tracker topology from geometry
   edm::ESHandle<TrackerTopology> tTopoHand;
   es.get<IdealGeometryRecord>().get(tTopoHand);
   const TrackerTopology *tTopo=tTopoHand.product();
 
   auto const & doublets = thePairGenerator->doublets(region,ev,es);
   
   if (doublets.empty()) return;
    
   auto outSeq =  doublets.detLayer(HitDoublets::outer)->seqNum();
 
 
   int size = theLayers.size();
 
 
   using NodeInfo = KDTreeNodeInfo<unsigned int>;
   std::vector<NodeInfo > layerTree; // re-used throughout
   std::vector<unsigned int> foundNodes; // re-used throughout
   foundNodes.reserve(100);
   KDTreeLinkerAlgo<unsigned int> hitTree[size];
 
   float rzError[size]; //save maximum errors
   float maxphi = Geom::ftwoPi(), minphi = -maxphi; //increase to cater for any range
 
   LayerRZPredictions mapPred[size];
 
   const RecHitsSortedInPhi * thirdHitMap[size];
 
   for(int il = 0; il < size; il++) {
     thirdHitMap[il] = &(*theLayerCache)(theLayers[il], region, ev, es);
     auto const & hits = *thirdHitMap[il];
  
     const DetLayer *layer = theLayers[il].detLayer();
     LayerRZPredictions &predRZ = mapPred[il];
     predRZ.line.initLayer(layer);
     predRZ.helix1.initLayer(layer);
     predRZ.helix2.initLayer(layer);
     predRZ.line.initTolerance(extraHitRZtolerance);
     predRZ.helix1.initTolerance(extraHitRZtolerance);
     predRZ.helix2.initTolerance(extraHitRZtolerance);
     predRZ.rzPositionFixup = MatchedHitRZCorrectionFromBending(layer,tTopo);
     
     layerTree.clear();
     float minv=999999.0; float maxv = -999999.0; // Initialise to extreme values in case no hits
     float maxErr=0.0f;
     for (unsigned int i=0; i!=hits.size(); ++i) {
       auto angle = hits.phi(i);
       auto v =  hits.gv(i);
       //use (phi,r) for endcaps rather than (phi,z)
       minv = std::min(minv,v);  maxv = std::max(maxv,v);
       float myerr = hits.dv[i];
       maxErr = std::max(maxErr,myerr);
       layerTree.emplace_back(i, angle, v); // save it
       if (angle < 0)  // wrap all points in phi
     { layerTree.emplace_back(i, angle+Geom::ftwoPi(), v);}
       else
     { layerTree.emplace_back(i, angle-Geom::ftwoPi(), v);}
     }
     KDTreeBox phiZ(minphi, maxphi, minv-0.01f, maxv+0.01f);  // declare our bounds
     //add fudge factors in case only one hit and also for floating-point inaccuracy
     hitTree[il].build(layerTree, phiZ); // make KDtree
     rzError[il] = maxErr; //save error
   }
 
   double curv = PixelRecoUtilities::curvature(1. / region.ptMin(), es);
   
   for (std::size_t ip =0;  ip!=doublets.size(); ip++) {
     auto xi = doublets.x(ip,HitDoublets::inner);
     auto yi = doublets.y(ip,HitDoublets::inner);
     auto zi = doublets.z(ip,HitDoublets::inner);
     // auto rvi = doublets.rv(ip,HitDoublets::inner);
     auto xo = doublets.x(ip,HitDoublets::outer);
     auto yo = doublets.y(ip,HitDoublets::outer);
     auto zo = doublets.z(ip,HitDoublets::outer);
     // auto rvo = doublets.rv(ip,HitDoublets::outer);
     GlobalPoint gp1(xi,yi,zi);
     GlobalPoint gp2(xo,yo,zo);
 
     PixelRecoLineRZ line(gp1, gp2);
     PixelRecoPointRZ point2(gp2.perp(), zo);
     ThirdHitPredictionFromCircle predictionRPhi(gp1, gp2, extraHitRPhitolerance);
 
     Range generalCurvature = predictionRPhi.curvature(region.originRBound());
     if (!intersect(generalCurvature, Range(-curv, curv))) continue;
 
     for(int il = 0; il < size; il++) {
       if (hitTree[il].empty()) continue; // Don't bother if no hits
       const DetLayer *layer = theLayers[il].detLayer();
       bool barrelLayer = layer->isBarrel();
       
       Range curvature = generalCurvature;
       ThirdHitCorrection correction(es, region.ptMin(), layer, line, point2,  outSeq, useMScat);
       
       LayerRZPredictions &predRZ = mapPred[il];
       predRZ.line.initPropagator(&line);
       
       Range rzRange;
       if (useBend) {
         // For the barrel region:
         // swiping the helix passing through the two points across from
         // negative to positive bending, can give us a sort of U-shaped
         // projection onto the phi-z (barrel) or r-z plane (forward)
         // so we checking minimum/maximum of all three possible extrema
         // 
         // For the endcap region:
         // Checking minimum/maximum radius of the helix projection
         // onto an endcap plane, here we have to guard against
         // looping tracks, when phi(delta z) gets out of control.
         // HelixRZ::rAtZ should not follow looping tracks, but clamp
         // to the minimum reachable r with the next-best lower |curvature|.
         // So same procedure as for the barrel region can be applied.
         //
         // In order to avoid looking for potential looping tracks at all
         // we also clamp the allowed curvature range for this layer,
         // and potentially fail the layer entirely
     
         if (!barrelLayer) {
           Range z3s = predRZ.line.detRange();
           double z3 = z3s.first < 0 ? std::max(z3s.first, z3s.second)
         : std::min(z3s.first, z3s.second);
           double maxCurvature = HelixRZ::maxCurvature(&predictionRPhi,
                                                       gp1.z(), gp2.z(), z3);
           if (!intersect(curvature, Range(-maxCurvature, maxCurvature)))
             continue;
         }
     
         HelixRZ helix1(&predictionRPhi, gp1.z(), gp2.z(), curvature.first);
         HelixRZ helix2(&predictionRPhi, gp1.z(), gp2.z(), curvature.second);
     
         predRZ.helix1.initPropagator(&helix1);
         predRZ.helix2.initPropagator(&helix2);
     
         Range rzRanges[2] = { predRZ.helix1(), predRZ.helix2() };
         predRZ.helix1.initPropagator(nullptr);
         predRZ.helix2.initPropagator(nullptr);
 
         rzRange.first = std::min(rzRanges[0].first, rzRanges[1].first);
         rzRange.second = std::max(rzRanges[0].second, rzRanges[1].second);
     
         // if the allowed curvatures include a straight line,
         // this can give us another extremum for allowed r/z
         if (curvature.first * curvature.second < 0.0) {
           Range rzLineRange = predRZ.line();
           rzRange.first = std::min(rzRange.first, rzLineRange.first);
           rzRange.second = std::max(rzRange.second, rzLineRange.second);
         }
       } else {
         rzRange = predRZ.line();
       }
 
       if (rzRange.first >= rzRange.second)
         continue;
 
       correction.correctRZRange(rzRange);
 
       Range phiRange;
       if (useFixedPreFiltering) {
     float phi0 = doublets.phi(ip,HitDoublets::outer);
         phiRange = Range(phi0 - dphi, phi0 + dphi);
       } else {
         Range radius;
     
         if (barrelLayer) {
           radius = predRZ.line.detRange();
           if (!intersect(rzRange, predRZ.line.detSize()))
             continue;
         } else {
           radius = rzRange;
           if (!intersect(radius, predRZ.line.detSize()))
             continue;
         }
     
         Range rPhi1 = predictionRPhi(curvature, radius.first);
         Range rPhi2 = predictionRPhi(curvature, radius.second);
         correction.correctRPhiRange(rPhi1);
         correction.correctRPhiRange(rPhi2);
         rPhi1.first  /= radius.first;
         rPhi1.second /= radius.first;
         rPhi2.first  /= radius.second;
         rPhi2.second /= radius.second;
         phiRange = mergePhiRanges(rPhi1, rPhi2);
       }
       
       foundNodes.clear(); // Now recover hits in bounding box...
       float prmin=phiRange.min(), prmax=phiRange.max(); //get contiguous range
       if ((prmax-prmin) > Geom::ftwoPi())
     { prmax=Geom::fpi(); prmin = -Geom::fpi();}
       else
     { while (prmax>maxphi) { prmin -= Geom::ftwoPi(); prmax -= Geom::ftwoPi();}
       while (prmin<minphi) { prmin += Geom::ftwoPi(); prmax += Geom::ftwoPi();}
       // This needs range -twoPi to +twoPi to work
     }
       if (barrelLayer) {
     Range regMax = predRZ.line.detRange();
     Range regMin = predRZ.line(regMax.min());
     regMax = predRZ.line(regMax.max());
     correction.correctRZRange(regMin);
     correction.correctRZRange(regMax);
     if (regMax.min() < regMin.min()) { swap(regMax, regMin);}
     KDTreeBox phiZ(prmin, prmax,
                regMin.min()-fnSigmaRZ*rzError[il],
                regMax.max()+fnSigmaRZ*rzError[il]);
     hitTree[il].search(phiZ, foundNodes);
       }
       else {
     KDTreeBox phiZ(prmin, prmax,
                rzRange.min()-fnSigmaRZ*rzError[il],
                rzRange.max()+fnSigmaRZ*rzError[il]);
     hitTree[il].search(phiZ, foundNodes);
       }
       
       MatchedHitRZCorrectionFromBending l2rzFixup(doublets.hit(ip,HitDoublets::outer)->det()->geographicalId(), tTopo);
       MatchedHitRZCorrectionFromBending l3rzFixup = predRZ.rzPositionFixup;
 
       thirdHitMap[il] = &(*theLayerCache)(theLayers[il], region, ev, es);
       auto const & hits = *thirdHitMap[il];
       for (auto KDdata : foundNodes) {
     GlobalPoint p3 = hits.gp(KDdata); 
     double p3_r = p3.perp();
     double p3_z = p3.z();
     float p3_phi =  hits.phi(KDdata); 
 
     Range rangeRPhi = predictionRPhi(curvature, p3_r);
     correction.correctRPhiRange(rangeRPhi);
 
     float ir = 1.f/p3_r;
     float phiErr = nSigmaPhi *  hits.drphi[KDdata]*ir;
     if (!checkPhiInRange(p3_phi, rangeRPhi.first*ir-phiErr, rangeRPhi.second*ir+phiErr))
       continue;
     
     Basic2DVector<double> thc(p3.x(), p3.y());
     
     auto curv_ = predictionRPhi.curvature(thc);
     double p2_r = point2.r(); double p2_z = point2.z(); // they will be modified!
     
     l2rzFixup(predictionRPhi, curv_, *doublets.hit(ip,HitDoublets::outer), p2_r, p2_z, tTopo);
     l3rzFixup(predictionRPhi, curv_, *hits.theHits[KDdata].hit(), p3_r, p3_z, tTopo);
     
     Range rangeRZ;
     if (useBend) {
       HelixRZ updatedHelix(&predictionRPhi, gp1.z(), p2_z, curv_);
       rangeRZ = predRZ.helix1(barrelLayer ? p3_r : p3_z, updatedHelix);
     } else {
       float tIP = predictionRPhi.transverseIP(thc);
       PixelRecoPointRZ updatedPoint2(p2_r, p2_z);
       PixelRecoLineRZ updatedLine(line.origin(), point2, tIP);
       rangeRZ = predRZ.line(barrelLayer ? p3_r : p3_z, line);
     }
     correction.correctRZRange(rangeRZ);
     
     double err = nSigmaRZ * hits.dv[KDdata];
     
     rangeRZ.first -= err, rangeRZ.second += err;
     
     if (!rangeRZ.inside(barrelLayer ? p3_z : p3_r)) continue;
 
     if (theMaxElement!=0 && result.size() >= theMaxElement) {
       result.clear();
       edm::LogError("TooManyTriplets")<<" number of triples exceed maximum. no triplets produced.";
       return;
     }
     result.emplace_back( doublets.hit(ip,HitDoublets::inner), doublets.hit(ip,HitDoublets::outer), hits.theHits[KDdata].hit()); 
       }
     }
   }
   // std::cout << "found triplets " << result.size() << std::endl;
 }

void PixelTripletLargeTipGenerator::init	(	const HitPairGenerator &	pairs,
		LayerCacheType *	layerCache
	)

overridevirtual

Implements HitTripletGeneratorFromPairAndLayers.

Definition at line 56 of file PixelTripletLargeTipGenerator.cc.

References HitPairGenerator::clone(), theLayerCache, and thePairGenerator.

 {
   thePairGenerator = pairs.clone();
   theLayerCache = layerCache;
 }

std::pair< float, float > PixelTripletLargeTipGenerator::mergePhiRanges	(	const std::pair< float, float > &	r1,
		const std::pair< float, float > &	r2
	)		const

private

Definition at line 366 of file PixelTripletLargeTipGenerator.cc.

References M_PI, bookConverter::max, and min().

Referenced by hitTriplets().

 { float r2Min = r2.first;
   float r2Max = r2.second;
   while (r1.first - r2Min > +M_PI) r2Min += 2. * M_PI, r2Max += 2. * M_PI;
   while (r1.first - r2Min < -M_PI) r2Min -= 2. * M_PI, r2Max -= 2. * M_PI;
   return std::make_pair(min(r1.first, r2Min), max(r1.second, r2Max));
 }

const HitPairGenerator& PixelTripletLargeTipGenerator::pairGenerator ( ) const

inline

Definition at line 38 of file PixelTripletLargeTipGenerator.h.

References thePairGenerator.

38 { return *thePairGenerator; }

PixelTripletLargeTipGenerator::thePairGenerator

HitPairGenerator * thePairGenerator

Definition: PixelTripletLargeTipGenerator.h:48

void PixelTripletLargeTipGenerator::setSeedingLayers	(	SeedingLayerSetsHits::SeedingLayerSet	pairLayers,
		std::vector< SeedingLayerSetsHits::SeedingLayer >	thirdLayers
	)

overridevirtual

Implements HitTripletGeneratorFromPairAndLayers.

Definition at line 63 of file PixelTripletLargeTipGenerator.cc.

References HitPairGenerator::setSeedingLayers(), theLayers, and thePairGenerator.

                                                                                                               {
   thePairGenerator->setSeedingLayers(pairLayers);
   theLayers = thirdLayers;
 }