Inheritance diagram for SiStripBackplaneCalibration:

Public Member Functions
virtual void	beginOfJob (AlignableTracker tracker, AlignableMuon muon, AlignableExtras *extras)

virtual unsigned int	derivatives (std::vector< ValuesIndexPair > &outDerivInds, const TransientTrackingRecHit &hit, const TrajectoryStateOnSurface &tsos, const edm::EventSetup &setup, const EventInfo &eventInfo) const

virtual void	endOfJob ()

virtual double	getParameter (unsigned int index) const

virtual double	getParameterError (unsigned int index) const

virtual unsigned int	numParameters () const
	How many parameters does this calibration define? More...

virtual bool	setParameter (unsigned int index, double value)

virtual bool	setParameterError (unsigned int index, double error)

	SiStripBackplaneCalibration (const edm::ParameterSet &cfg)
	Constructor. More...

virtual	~SiStripBackplaneCalibration ()
	Destructor. More...

Public Member Functions inherited from IntegratedCalibrationBase
virtual std::vector< Values >	derivatives (const TrackingRecHit &hit, const TrajectoryStateOnSurface &tsos, const edm::EventSetup &setup, const EventInfo &eventInfo) const

virtual unsigned int	derivatives (std::vector< ValuesIndexPair > &outDerivInds, const TrackingRecHit &hit, const TrajectoryStateOnSurface &tsos, const edm::EventSetup &setup, const EventInfo &eventInfo) const =0

virtual void	endOfLoop ()

	IntegratedCalibrationBase (const edm::ParameterSet &cfg)
	Values and their parameter index. More...

const std::string &	name () const
	name of this calibration More...

virtual void	startNewLoop ()

virtual	~IntegratedCalibrationBase ()
	Destructor. More...

Private Member Functions
bool	checkBackPlaneCorrectionInput (const edm::EventSetup &setup, const EventInfo &eventInfo)

SiStripBackPlaneCorrection *	createFromTree (const char fileName, const char treeName) const

const SiStripBackPlaneCorrection *	getBackPlaneCorrectionInput ()

double	getParameterForDetId (unsigned int detId, edm::RunNumber_t run) const

void	writeTree (const SiStripBackPlaneCorrection backPlaneCorr, const std::map< unsigned int, TreeStruct > &treeInfo, const char treeName) const

Private Attributes
const std::vector< std::string >	mergeFileNames_

const edm::ParameterSet	moduleGroupSelCfg_

TkModuleGroupSelector *	moduleGroupSelector_

const std::string	outFileName_

std::vector< double >	parameters_

std::vector< double >	paramUncertainties_

int16_t	readoutMode_

const std::string	readoutModeName_

const std::string	recordNameDBwrite_

const bool	saveToDB_

SiStripBackPlaneCorrection *	siStripBackPlaneCorrInput_

edm::ESWatcher < SiStripBackPlaneCorrectionRcd >	watchBackPlaneCorrRcd_

Additional Inherited Members
Public Types inherited from IntegratedCalibrationBase
typedef AlignmentAlgorithmBase::EventInfo	EventInfo

typedef std::pair< double, double >	Values

typedef std::pair< Values, unsigned int >	ValuesIndexPair
	x- and y-values More...

Detailed Description

Author: : Gero Flucke date : November 2012

Revision:: 1.1.2.13

Date:: 2013/05/31 08:37:12

(last update by

Author:: flucke

)

Calibration of back plane corrections for the strip tracker, integrated in the alignment algorithms. Note that not all algorithms support this...

Usally use one instance for deco mode data since peak mode should give the

Definition at line 55 of file SiStripBackplaneCalibration.cc.

Constructor & Destructor Documentation

SiStripBackplaneCalibration::SiStripBackplaneCalibration ( const edm::ParameterSet & cfg )

explicit

Constructor.

Definition at line 148 of file SiStripBackplaneCalibration.cc.

References edm::hlt::Exception, kDeconvolutionMode, kPeakMode, readoutMode_, and readoutModeName_.

   : IntegratedCalibrationBase(cfg),
     readoutModeName_(cfg.getParameter<std::string>("readoutMode")),
     saveToDB_(cfg.getParameter<bool>("saveToDB")),
     recordNameDBwrite_(cfg.getParameter<std::string>("recordNameDBwrite")),
     outFileName_(cfg.getParameter<std::string>("treeFile")),
     mergeFileNames_(cfg.getParameter<std::vector<std::string> >("mergeTreeFiles")),
     siStripBackPlaneCorrInput_(0),
     moduleGroupSelector_(0),
     moduleGroupSelCfg_(cfg.getParameter<edm::ParameterSet>("BackplaneModuleGroups"))
 {
 
   // SiStripLatency::singleReadOutMode() returns
   // 1: all in peak, 0: all in deco, -1: mixed state
   // (in principle one could treat even mixed state APV by APV...)
   if (readoutModeName_ == "peak") {
     readoutMode_ = kPeakMode;
   } else if (readoutModeName_ == "deconvolution") {
     readoutMode_ = kDeconvolutionMode;
   } else {
     throw cms::Exception("BadConfig")
       << "SiStripBackplaneCalibration:\n" << "Unknown mode '" 
       << readoutModeName_ << "', should be 'peak' or 'deconvolution' .\n";
   }
 
 }

SiStripBackplaneCalibration::~SiStripBackplaneCalibration ( )

virtual

Destructor.

Definition at line 176 of file SiStripBackplaneCalibration.cc.

References moduleGroupSelector_, and siStripBackPlaneCorrInput_.

 {
   delete moduleGroupSelector_;
   //  std::cout << "Destroy SiStripBackplaneCalibration named " << this->name() << std::endl;
   delete siStripBackPlaneCorrInput_;
 }

Member Function Documentation

void SiStripBackplaneCalibration::beginOfJob	(	AlignableTracker *	tracker,
		AlignableMuon *	muon,
		AlignableExtras *	extras
	)

virtual

Call at beginning of job: default implementation is dummy, to be overwritten in derived class if useful.

Reimplemented from IntegratedCalibrationBase.

Definition at line 295 of file SiStripBackplaneCalibration.cc.

References TkModuleGroupSelector::getNumberOfParameters(), mergeFileNames_, moduleGroupSelCfg_, moduleGroupSelector_, IntegratedCalibrationBase::name(), TkModuleGroupSelector::numIovs(), numParameters(), outFileName_, parameters_, paramUncertainties_, readoutModeName_, saveToDB_, SiStripDetId::TEC, SiStripDetId::TIB, SiStripDetId::TID, and SiStripDetId::TOB.

 {
   //specify the sub-detectors for which the back plane correction is determined: all strips
   const std::vector<int> sdets = boost::assign::list_of(SiStripDetId::TIB)(SiStripDetId::TID)
     (SiStripDetId::TOB)(SiStripDetId::TEC);
   
   moduleGroupSelector_ = new TkModuleGroupSelector(aliTracker, moduleGroupSelCfg_, sdets);
   
   parameters_.resize(moduleGroupSelector_->getNumberOfParameters(), 0.);
   paramUncertainties_.resize(moduleGroupSelector_->getNumberOfParameters(), 0.);
 
   edm::LogInfo("Alignment") << "@SUB=SiStripBackplaneCalibration" << "Created with name "
                             << this->name() << " for readout mode '" << readoutModeName_
                 << "',\n" << this->numParameters() << " parameters to be determined."
                             << "\nsaveToDB = " << saveToDB_
                             << "\n outFileName = " << outFileName_
                             << "\n N(merge files) = " << mergeFileNames_.size()
                             << "\n number of IOVs = " << moduleGroupSelector_->numIovs();
   
   if (mergeFileNames_.size()) {
     edm::LogInfo("Alignment") << "@SUB=SiStripBackplaneCalibration"
                               << "First file to merge: " << mergeFileNames_[0];
   }
   
 }

bool SiStripBackplaneCalibration::checkBackPlaneCorrectionInput	(	const edm::EventSetup &	setup,
		const EventInfo &	eventInfo
	)

private

If called the first time, fill 'siStripBackPlaneCorrInput_', later check that Backplane has not changed.

Definition at line 416 of file SiStripBackplaneCalibration.cc.

References edm::ESWatcher< T >::check(), AlignmentAlgorithmBase::EventInfo::eventId(), edm::hlt::Exception, edm::EventSetup::get(), SiStripBackPlaneCorrection::getBackPlaneCorrections(), readoutModeName_, edm::EventID::run(), siStripBackPlaneCorrInput_, and watchBackPlaneCorrRcd_.

Referenced by derivatives().

 {
   edm::ESHandle<SiStripBackPlaneCorrection> backPlaneCorrHandle;
   if (!siStripBackPlaneCorrInput_) {
     setup.get<SiStripBackPlaneCorrectionRcd>().get(readoutModeName_, backPlaneCorrHandle);
     siStripBackPlaneCorrInput_ = new SiStripBackPlaneCorrection(*backPlaneCorrHandle);
     // FIXME: Should we call 'watchBackPlaneCorrRcd_.check(setup)' as well?
     //        Otherwise could be that next check has to check via following 'else', though
     //        no new IOV has started... (to be checked)
   } else {
     if (watchBackPlaneCorrRcd_.check(setup)) { // new IOV of input - but how to check peak vs deco?
       setup.get<SiStripBackPlaneCorrectionRcd>().get(readoutModeName_, backPlaneCorrHandle);
       if (backPlaneCorrHandle->getBackPlaneCorrections() // but only bad if non-identical values
       != siStripBackPlaneCorrInput_->getBackPlaneCorrections()) { // (comparing maps)
     // Maps are containers sorted by key, but comparison problems may arise from
     // 'floating point comparison' problems (FIXME?)
     throw cms::Exception("BadInput")
       << "SiStripBackplaneCalibration::checkBackPlaneCorrectionInput:\n"
       << "Content of SiStripBackPlaneCorrection changed at run " << eventInfo.eventId().run()
       << ", but algorithm expects constant input!\n";
     return false; // not reached...
       }
     }
   }
   
   return true;
 }

SiStripBackPlaneCorrection * SiStripBackplaneCalibration::createFromTree	(	const char *	fileName,
		const char *	treeName
	)		const

private

Definition at line 540 of file SiStripBackplaneCalibration.cc.

References mergeVDriftHistosByStation::file, SiStripBackPlaneCorrection::putBackPlaneCorrection(), query::result, MainPageGenerator::tree, and relativeConstraints::value.

Referenced by getBackPlaneCorrectionInput().

 {
   // Check for file existence on your own to work around
   // https://hypernews.cern.ch/HyperNews/CMS/get/swDevelopment/2715.html:
   TFile* file = 0;
   FILE* testFile = fopen(fileName,"r");
   if (testFile) {
     fclose(testFile);
     file = TFile::Open(fileName, "READ");
   } // else not existing, see error below
 
   TTree *tree = 0;
   if (file) file->GetObject(treeName, tree);
 
   SiStripBackPlaneCorrection *result = 0;
   if (tree) {
     unsigned int id = 0;
     float value = 0.;
     tree->SetBranchAddress("detId", &id);
     tree->SetBranchAddress("value", &value);
 
     result = new SiStripBackPlaneCorrection;
     const Long64_t nEntries = tree->GetEntries();
     for (Long64_t iEntry = 0; iEntry < nEntries; ++iEntry) {
       tree->GetEntry(iEntry);
       result->putBackPlaneCorrection(id, value);
     }
   } else { // Warning only since could be parallel job on no events.
     edm::LogWarning("Alignment") << "@SUB=SiStripBackplaneCalibration::createFromTree"
                                  << "Could not get TTree '" << treeName << "' from file '"
                                  << fileName << (file ? "'." : "' (file does not exist).");
   }
 
   delete file; // tree will vanish with file
   return result;
 }

unsigned int SiStripBackplaneCalibration::derivatives	(	std::vector< ValuesIndexPair > &	outDerivInds,
		const TransientTrackingRecHit &	hit,
		const TrajectoryStateOnSurface &	tsos,
		const edm::EventSetup &	setup,
		const EventInfo &	eventInfo
	)		const

virtual

Return non-zero derivatives for x- and y-measurements with their indices by reference. Return value is their number.

Definition at line 191 of file SiStripBackplaneCalibration.cc.

References ecalTB2006H4_GenSimDigiReco_cfg::bField, Surface::bounds(), checkBackPlaneCorrectionInput(), TrackingRecHit::det(), AlignmentAlgorithmBase::EventInfo::eventId(), GeomDet::geographicalId(), edm::EventSetup::get(), TkModuleGroupSelector::getParameterIndexFromDetId(), cmsHarvester::index, kDeconvolutionMode, kPeakMode, TrajectoryStateOnSurface::localParameters(), LocalTrajectoryParameters::mixedFormatVector(), alignBH_cfg::mode, moduleGroupSelector_, GloballyPositioned< T >::position(), readoutMode_, readoutModeName_, edm::EventID::run(), GeomDet::surface(), Bounds::thickness(), and GloballyPositioned< T >::toLocal().

 {
   // ugly const-cast:
   // But it is either only first initialisation or throwing an exception...
   const_cast<SiStripBackplaneCalibration*>(this)->checkBackPlaneCorrectionInput(setup, eventInfo);
 
   outDerivInds.clear();
 
   edm::ESHandle<SiStripLatency> latency;  
   setup.get<SiStripLatencyRcd>().get(latency);
   const int16_t mode = latency->singleReadOutMode();
 
   if(mode == readoutMode_) {
     if (hit.det()) { // otherwise 'constraint hit' or whatever
       
       const int index = moduleGroupSelector_->getParameterIndexFromDetId(hit.det()->geographicalId(),
                                      eventInfo.eventId().run());
       if (index >= 0) { // otherwise not treated
         edm::ESHandle<MagneticField> magneticField;
         setup.get<IdealMagneticFieldRecord>().get(magneticField);
         const GlobalVector bField(magneticField->inTesla(hit.det()->surface().position()));
         const LocalVector bFieldLocal(hit.det()->surface().toLocal(bField));
         //std::cout << "SiStripBackplaneCalibration derivatives " << readoutModeName_ << std::endl;
         const double dZ = hit.det()->surface().bounds().thickness(); // it's a float only...
     const double tanPsi = tsos.localParameters().mixedFormatVector()[1]; //float...
 
     edm::ESHandle<SiStripLorentzAngle> lorentzAngleHandle;
     setup.get<SiStripLorentzAngleRcd>().get(readoutModeName_, lorentzAngleHandle);
     // Yes, mobility (= LA/By) stored in object called LA...
     const double mobility = lorentzAngleHandle->getLorentzAngle(hit.det()->geographicalId());
         // shift due to dead back plane has two parts:
     // 1) Lorentz Angle correction formula gets reduced thickness dz*(1-bp)
     // 2) 'Direct' effect is shift of effective module position in local z by bp*dz/2
     //   (see GF's presentation in alignment meeting 25.10.2012,
     //    https://indico.cern.ch/conferenceDisplay.py?confId=174266#2012-10-25)
         //        const double xDerivative = 0.5 * dZ * (mobility * bFieldLocal.y() - tanPsi);
         //FIXME: +tanPsi? At least that fits the sign of the dr/dw residual 
         //       in KarimakiDerivatives...
         const double xDerivative = 0.5 * dZ * (mobility * bFieldLocal.y() + tanPsi);
     // std::cout << "derivative is " << xDerivative << " for index " << index 
     //    << std::endl;
 //         if (index >= 10) {
 //           std::cout << "mobility * y-field " << mobility * bFieldLocal.y()
 //                     << ", \n tanPsi " << tanPsi /*<< ", dZ " << dZ */ << std::endl;
 //           std::cout << "|tanPsi| - |mobility * y-field| "
 //                     << fabs(tanPsi) - fabs(mobility * bFieldLocal.y())
 //                     << std::endl;
 //         }
     const Values derivs(xDerivative, 0.); // yDerivative = 0.
     outDerivInds.push_back(ValuesIndexPair(derivs, index));
       }
     } else {
       edm::LogWarning("Alignment") << "@SUB=SiStripBackplaneCalibration::derivatives1"
                                    << "Hit without GeomDet, skip!";
     }
   } else if (mode != kDeconvolutionMode && mode != kPeakMode) {
     // warn only if unknown/mixed mode  
     edm::LogWarning("Alignment") << "@SUB=SiStripBackplaneCalibration::derivatives2"
                                  << "Readout mode is " << mode << ", but looking for "
                                  << readoutMode_ << " (" << readoutModeName_ << ").";
   }
   
   return outDerivInds.size();
 }

void SiStripBackplaneCalibration::endOfJob ( )

virtual

Called at end of a the job of the AlignmentProducer. Write out determined parameters.

Implements IntegratedCalibrationBase.

Definition at line 325 of file SiStripBackplaneCalibration.cc.

References TkModuleGroupSelector::firstRunOfIOV(), getBackPlaneCorrectionInput(), SiStripBackPlaneCorrection::getBackPlaneCorrections(), getParameterError(), getParameterForDetId(), TkModuleGroupSelector::getParameterIndexFromDetId(), input, edm::Service< T >::isAvailable(), moduleGroupSelector_, IntegratedCalibrationBase::name(), TkModuleGroupSelector::numIovs(), dbtoconf::out, convertSQLitetoXML_cfg::output, parameters_, paramUncertainties_, SiStripBackPlaneCorrection::putBackPlaneCorrection(), readoutModeName_, recordNameDBwrite_, saveToDB_, AlCaHLTBitMon_QueryRunRegistry::string, cond::service::PoolDBOutputService::writeOne(), and writeTree().

 {
   // loginfo output
   std::ostringstream out;
   out << "Parameter results for readout mode '" << readoutModeName_ << "'\n";
   for (unsigned int iPar = 0; iPar < parameters_.size(); ++iPar) {
     out << iPar << ": " << parameters_[iPar] << " +- " << paramUncertainties_[iPar] << "\n";
   }
   edm::LogInfo("Alignment") << "@SUB=SiStripBackplaneCalibration::endOfJob" << out.str();
 
   std::map<unsigned int, TreeStruct> treeInfo; // map of TreeStruct for each detId
 
   // now write 'input' tree
   const SiStripBackPlaneCorrection *input = this->getBackPlaneCorrectionInput(); // never NULL
   const std::string treeName(this->name() + '_' + readoutModeName_ + '_');
   this->writeTree(input, treeInfo, (treeName + "input").c_str()); // empty treeInfo for input...
 
   if (input->getBackPlaneCorrections().empty()) {
     edm::LogError("Alignment") << "@SUB=SiStripBackplaneCalibration::endOfJob"
                    << "Input back plane correction map is empty ('"
                    << readoutModeName_ << "' mode), skip writing output!";
     return;
   }
 
   const unsigned int nonZeroParamsOrErrors =   // Any determined value?
     count_if (parameters_.begin(), parameters_.end(), std::bind2nd(std::not_equal_to<double>(),0.))
     + count_if(paramUncertainties_.begin(), paramUncertainties_.end(),
                std::bind2nd(std::not_equal_to<double>(), 0.));
 
   for (unsigned int iIOV = 0; iIOV < moduleGroupSelector_->numIovs(); ++iIOV) {
     cond::Time_t firstRunOfIOV = moduleGroupSelector_->firstRunOfIOV(iIOV);
     SiStripBackPlaneCorrection *output = new SiStripBackPlaneCorrection;
     // Loop on map of values from input and add (possible) parameter results
     for (auto iterIdValue = input->getBackPlaneCorrections().begin();
      iterIdValue != input->getBackPlaneCorrections().end(); ++iterIdValue) {
       // type of (*iterIdValue) is pair<unsigned int, float>
       const unsigned int detId = iterIdValue->first; // key of map is DetId
       // Some code one could use to miscalibrate wrt input:
       // double param = 0.;
       // const DetId id(detId);
       // switch (id.subdetId()) {
       // case 3:
       //   // delta = 0.025;
       //   {
       //     TIBDetId tibId(detId);
       //     param = tibId.layer() * 0.01;
       //   }
       //   break;
       // case 5:
       //   //delta = 0.050;
       //   {
       //     TOBDetId tobId(detId);
       //     param = tobId.layer() * 0.015;
       //   }
       //   break;
       // case 4: // TID
       //   param = 0.03; break;
       // case 6: // TEC
       //   param = 0.05; break;
       //   break;
       // default:
       //   std::cout << "unknown subdet " << id.subdetId() << std::endl;
       // }
       const double param = this->getParameterForDetId(detId, firstRunOfIOV);
       // put result in output, i.e. sum of input and determined parameter:
       output->putBackPlaneCorrection(detId, iterIdValue->second + param);
       const int paramIndex = moduleGroupSelector_->getParameterIndexFromDetId(detId,firstRunOfIOV);
       treeInfo[detId] = TreeStruct(param, this->getParameterError(paramIndex), paramIndex);
     }
 
     if (saveToDB_ || nonZeroParamsOrErrors != 0) { // Skip writing mille jobs...
       this->writeTree(output, treeInfo, (treeName + Form("result_%lld", firstRunOfIOV)).c_str());
     }
 
     if (saveToDB_) { // If requested, write out to DB 
       edm::Service<cond::service::PoolDBOutputService> dbService;
       if (dbService.isAvailable()) {
     dbService->writeOne(output, firstRunOfIOV, recordNameDBwrite_.c_str());
     // no 'delete output;': writeOne(..) took over ownership
       } else {
     delete output;
     edm::LogError("BadConfig") << "@SUB=SiStripBackplaneCalibration::endOfJob"
                    << "No PoolDBOutputService available, but saveToDB true!";
       }
     } else {
       delete output;
     }
   } // end loop on IOVs
 }

const SiStripBackPlaneCorrection * SiStripBackplaneCalibration::getBackPlaneCorrectionInput ( )

private

Input BackPlaneCorrection values:

either from EventSetup of first call to derivatives(..)
or created from files of passed by configuration (i.e. from parallel processing)

Definition at line 446 of file SiStripBackplaneCalibration.cc.

References createFromTree(), SiStripBackPlaneCorrection::getBackPlaneCorrections(), mergeFileNames_, IntegratedCalibrationBase::name(), readoutModeName_, siStripBackPlaneCorrInput_, and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by endOfJob().

 {
   // For parallel processing in Millepede II, create SiStripBackPlaneCorrection
   // from info stored in files of parallel jobs and check that they are identical.
   // If this job has run on events, still check that back plane corrections are
   // identical to the ones from mergeFileNames_.
   const std::string treeName(((this->name() + '_') += readoutModeName_) += "_input");
   for (auto iFile = mergeFileNames_.begin(); iFile != mergeFileNames_.end(); ++iFile) {
     SiStripBackPlaneCorrection* bpCorr = this->createFromTree(iFile->c_str(), treeName.c_str());
     // siStripBackPlaneCorrInput_ could be non-null from previous file of this loop
     // or from checkBackPlaneCorrectionInput(..) when running on data in this job as well
     if (!siStripBackPlaneCorrInput_ || siStripBackPlaneCorrInput_->getBackPlaneCorrections().empty()) {
       delete siStripBackPlaneCorrInput_; // NULL or empty
       siStripBackPlaneCorrInput_ = bpCorr;
     } else {
       // about comparison of maps see comments in checkBackPlaneCorrectionInput
       if (bpCorr && !bpCorr->getBackPlaneCorrections().empty() && // single job might not have got events
           bpCorr->getBackPlaneCorrections() != siStripBackPlaneCorrInput_->getBackPlaneCorrections()) {
         // Throw exception instead of error?
         edm::LogError("NoInput") << "@SUB=SiStripBackplaneCalibration::getBackPlaneCorrectionInput"
                                  << "Different input values from tree " << treeName
                                  << " in file " << *iFile << ".";
         
       }
       delete bpCorr;
     }
   }
 
   if (!siStripBackPlaneCorrInput_) { // no files nor ran on events
     siStripBackPlaneCorrInput_ = new SiStripBackPlaneCorrection;
     edm::LogError("NoInput") << "@SUB=SiStripBackplaneCalibration::getBackPlaneCorrectionInput"
                  << "No input, create an empty one ('" << readoutModeName_ << "' mode)!";
   } else if (siStripBackPlaneCorrInput_->getBackPlaneCorrections().empty()) {
     edm::LogError("NoInput") << "@SUB=SiStripBackplaneCalibration::getBackPlaneCorrectionInput"
                  << "Empty result ('" << readoutModeName_ << "' mode)!";
   }
 
   return siStripBackPlaneCorrInput_;
 }

double SiStripBackplaneCalibration::getParameter ( unsigned int index ) const

virtual

Return current value of parameter identified by index. Returns 0. if index out-of-bounds.

Implements IntegratedCalibrationBase.

Definition at line 283 of file SiStripBackplaneCalibration.cc.

References cmsHarvester::index, and parameters_.

Referenced by Mixins._Parameterizable::hasParameter().

 {
   return (index >= parameters_.size() ? 0. : parameters_[index]);
 }

double SiStripBackplaneCalibration::getParameterError ( unsigned int index ) const

virtual

Return current value of parameter identified by index. Returns 0. if index out-of-bounds or if errors undetermined.

Implements IntegratedCalibrationBase.

Definition at line 289 of file SiStripBackplaneCalibration.cc.

References cmsHarvester::index, and paramUncertainties_.

Referenced by endOfJob().

 {
   return (index >= paramUncertainties_.size() ? 0. : paramUncertainties_[index]);
 }

double SiStripBackplaneCalibration::getParameterForDetId	(	unsigned int	detId,
		edm::RunNumber_t	run
	)		const

private

Determined parameter value for this detId (detId not treated => 0.) and the given run.

Definition at line 487 of file SiStripBackplaneCalibration.cc.

References TkModuleGroupSelector::getParameterIndexFromDetId(), cmsHarvester::index, moduleGroupSelector_, and parameters_.

Referenced by endOfJob().

 {
   const int index = moduleGroupSelector_->getParameterIndexFromDetId(detId, run);
 
   return (index < 0 ? 0. : parameters_[index]);
 }

unsigned int SiStripBackplaneCalibration::numParameters ( ) const

virtual

How many parameters does this calibration define?

Implements IntegratedCalibrationBase.

Definition at line 184 of file SiStripBackplaneCalibration.cc.

References parameters_.

Referenced by beginOfJob().

 {
   return parameters_.size();
 }

bool SiStripBackplaneCalibration::setParameter	(	unsigned int	index,
		double	value
	)

virtual

Setting the determined parameter identified by index, returns false if out-of-bounds, true otherwise.

Implements IntegratedCalibrationBase.

Definition at line 261 of file SiStripBackplaneCalibration.cc.

References cmsHarvester::index, parameters_, and relativeConstraints::value.

Referenced by editorTools.UserCodeTool::__call__(), HiCoreTools.RestrictInputToAOD::__call__(), coreTools.RunOnData::__call__(), trackTools.MakeAODTrackCandidates::__call__(), metTools.AddMETCollection::__call__(), editorTools.ChangeSource::__call__(), HiCoreTools.RemoveMCMatching::__call__(), cmsswVersionTools.PickRelValInputFiles::__call__(), jetTools.AddJetCollection::__call__(), coreTools.RemoveMCMatching::__call__(), trackTools.MakePATTrackCandidates::__call__(), trigTools.SwitchOnTrigger::__call__(), HiCoreTools.RemoveAllPATObjectsBut::__call__(), HiCoreTools.RemoveSpecificPATObjects::__call__(), trigTools.SwitchOnTriggerStandAlone::__call__(), trackTools.MakeTrackCandidates::__call__(), tauTools.AddTauCollection::__call__(), trigTools.SwitchOnTriggerMatching::__call__(), HiCoreTools.RemoveCleaning::__call__(), HiCoreTools.AddCleaning::__call__(), trigTools.SwitchOnTriggerMatchingStandAlone::__call__(), trigTools.SwitchOnTriggerMatchEmbedding::__call__(), jetTools.SwitchJetCollection::__call__(), jetTools.AddJetID::__call__(), jetTools.SetTagInfos::__call__(), and metUncertaintyTools.RunMEtUncertainties::__call__().

 {
   if (index >= parameters_.size()) {
     return false;
   } else {
     parameters_[index] = value;
     return true;
   }
 }

bool SiStripBackplaneCalibration::setParameterError	(	unsigned int	index,
		double	error
	)

virtual

Setting the determined parameter uncertainty identified by index, returns false if out-of-bounds, true otherwise.

Implements IntegratedCalibrationBase.

Definition at line 272 of file SiStripBackplaneCalibration.cc.

References relativeConstraints::error, cmsHarvester::index, and paramUncertainties_.

 {
   if (index >= paramUncertainties_.size()) {
     return false;
   } else {
     paramUncertainties_[index] = error;
     return true;
   }
 }

void SiStripBackplaneCalibration::writeTree	(	const SiStripBackPlaneCorrection *	backPlaneCorr,
		const std::map< unsigned int, TreeStruct > &	treeInfo,
		const char *	treeName
	)		const

private

Definition at line 496 of file SiStripBackplaneCalibration.cc.

References mergeVDriftHistosByStation::file, TkModuleGroupSelector::firstRunOfIOV(), SiStripBackPlaneCorrection::getBackPlaneCorrections(), TkModuleGroupSelector::getParameterIndexFromDetId(), TreeStruct::LeafList(), moduleGroupSelector_, outFileName_, MainPageGenerator::tree, and relativeConstraints::value.

Referenced by endOfJob().

 {
   if (!backPlaneCorrection) return;
 
   TFile* file = TFile::Open(outFileName_.c_str(), "UPDATE");
   if (!file) {
     edm::LogError("BadConfig") << "@SUB=SiStripBackplaneCalibration::writeTree"
                    << "Could not open file '" << outFileName_ << "'.";
     return;
   }
 
   TTree *tree = new TTree(treeName, treeName);
   unsigned int id = 0;
   float value = 0.;
   TreeStruct treeStruct;
   tree->Branch("detId", &id, "detId/i");
   tree->Branch("value", &value, "value/F");
   tree->Branch("treeStruct", &treeStruct, TreeStruct::LeafList());
 
   for (auto iterIdValue = backPlaneCorrection->getBackPlaneCorrections().begin();
        iterIdValue != backPlaneCorrection->getBackPlaneCorrections().end(); ++iterIdValue) {
     // type of (*iterIdValue) is pair<unsigned int, float>
     id = iterIdValue->first; // key of map is DetId
     value = iterIdValue->second;
     // type of (*treeStructIter) is pair<unsigned int, TreeStruct>
     auto treeStructIter = treeInfo.find(id); // find info for this id
     if (treeStructIter != treeInfo.end()) {
       treeStruct = treeStructIter->second; // info from input map
     } else { // if none found, fill at least parameter index (using 1st IOV...)
       const cond::Time_t run1of1stIov = moduleGroupSelector_->firstRunOfIOV(0);
       const int ind = moduleGroupSelector_->getParameterIndexFromDetId(id, run1of1stIov);
       treeStruct = TreeStruct(ind);
     }
     tree->Fill();
   }
   tree->Write();
   delete file; // tree vanishes with the file...
 
 }