#include <ElectronConversionRejectionValidator.h>

Inheritance diagram for ElectronConversionRejectionValidator:

Public Member Functions
virtual void	analyze (const edm::Event &, const edm::EventSetup &)

virtual void	beginJob ()

virtual void	beginRun (edm::Run const &r, edm::EventSetup const &theEventSetup)

void	bookHistograms (void)

	ElectronConversionRejectionValidator (const edm::ParameterSet &)

virtual void	endJob ()

virtual void	endRun (edm::Run &r, edm::EventSetup const &es)

virtual	~ElectronConversionRejectionValidator ()

Public Member Functions inherited from edm::EDAnalyzer
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)

	EDAnalyzer ()

ModuleDescription const &	moduleDescription () const

std::string	workerType () const

virtual	~EDAnalyzer ()

Public Member Functions inherited from edm::EDConsumerBase
	EDConsumerBase ()

ProductHolderIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const

void	itemsMayGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

void	itemsToGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

std::vector < ProductHolderIndexAndSkipBit > const &	itemsToGetFromEvent () const

void	labelsForToken (EDGetToken iToken, Labels &oLabels) const

void	modulesDependentUpon (const std::string &iProcessName, std::vector< const char * > &oModuleLabels) const

bool	registeredToConsume (ProductHolderIndex, bool, BranchType) const

bool	registeredToConsumeMany (TypeID const &, BranchType) const

void	updateLookup (BranchType iBranchType, ProductHolderIndexHelper const &)

virtual	~EDConsumerBase ()

Private Attributes
edm::EDGetTokenT< reco::BeamSpot >	beamspotToken_

std::string	conversionCollection_

std::string	conversionCollectionProducer_

edm::EDGetTokenT < reco::ConversionCollection >	convToken_

DQMStore *	dbe_

std::string	dqmpath_

float	eleD0Max_

int	eleExpectedHitsInnerMax_

float	elePtMin_

std::string	fName_

edm::EDGetTokenT < reco::GsfElectronCollection >	gsfElecToken_

std::string	gsfElectronCollection_

std::string	gsfElectronCollectionProducer_

MonitorElement *	h_convEta_

MonitorElement *	h_convLeadTrackAlgo_

MonitorElement *	h_convLeadTrackpt_

MonitorElement *	h_convLog10TrailTrackpt_

MonitorElement *	h_convPhi_

MonitorElement *	h_convProb_

MonitorElement *	h_convPt_

MonitorElement *	h_convRho_

MonitorElement *	h_convTrailTrackAlgo_

MonitorElement *	h_convTrailTrackpt_

MonitorElement *	h_convZ_

MonitorElement *	h_eleEtaAll_

MonitorElement *	h_eleEtaEff_

MonitorElement *	h_eleEtaFail_

MonitorElement *	h_eleEtaPass_

MonitorElement *	h_elePhiAll_

MonitorElement *	h_elePhiEff_

MonitorElement *	h_elePhiFail_

MonitorElement *	h_elePhiPass_

MonitorElement *	h_elePtAll_

MonitorElement *	h_elePtEff_

MonitorElement *	h_elePtFail_

MonitorElement *	h_elePtPass_

bool	isRunCentrally_

int	nEntry_

int	nEvt_

edm::EDGetTokenT < reco::VertexCollection >	offline_pvToken_

edm::ParameterSet	parameters_

int	verbosity_

Additional Inherited Members
Public Types inherited from edm::EDAnalyzer
typedef EDAnalyzer	ModuleType

Static Public Member Functions inherited from edm::EDAnalyzer
static const std::string &	baseType ()

static void	fillDescriptions (ConfigurationDescriptions &descriptions)

static void	prevalidate (ConfigurationDescriptions &)

Protected Member Functions inherited from edm::EDConsumerBase
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)

EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)

ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...

template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()

void	consumesMany (const TypeToGet &id)

template<BranchType B>
void	consumesMany (const TypeToGet &id)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)

EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

Detailed Description

$Id: ElectronConversionRejectionValidator

Author: J.Bendavid

Definition at line 43 of file ElectronConversionRejectionValidator.h.

Constructor & Destructor Documentation

ElectronConversionRejectionValidator::ElectronConversionRejectionValidator ( const edm::ParameterSet & pset )

explicit

Definition at line 49 of file ElectronConversionRejectionValidator.cc.

References edm::ParameterSet::getParameter(), edm::ParameterSet::getUntrackedParameter(), and AlCaHLTBitMon_QueryRunRegistry::string.

 {
 
   fName_     = pset.getUntrackedParameter<std::string>("Name");
   verbosity_ = pset.getUntrackedParameter<int>("Verbosity");
   parameters_ = pset;
 
   gsfElectronCollectionProducer_ = pset.getParameter<std::string>("gsfElectronProducer");
   gsfElectronCollection_ = pset.getParameter<std::string>("gsfElectronCollection");
 
   conversionCollectionProducer_ = pset.getParameter<std::string>("convProducer");
   conversionCollection_ = pset.getParameter<std::string>("conversionCollection");
   // conversionTrackProducer_ = pset.getParameter<std::string>("trackProducer");
   gsfElecToken_ = consumes<reco::GsfElectronCollection>(
       edm::InputTag(gsfElectronCollectionProducer_,
                     gsfElectronCollection_));
   convToken_ = consumes<reco::ConversionCollection>(
       edm::InputTag(conversionCollectionProducer_,
                     conversionCollection_));
 
   isRunCentrally_=   pset.getParameter<bool>("isRunCentrally");
 
   elePtMin_ = pset.getParameter<double>("elePtMin");
   eleExpectedHitsInnerMax_ = pset.getParameter<int>("eleExpectedHitsInnerMax");
   eleD0Max_ = pset.getParameter<double>("eleD0Max");
   offline_pvToken_ = consumes<reco::VertexCollection>(
       pset.getUntrackedParameter<edm::InputTag> ("offlinePV",
                                                  edm::InputTag("offlinePrimaryVertices")));
   beamspotToken_ = consumes<reco::BeamSpot>(
       pset.getUntrackedParameter<edm::InputTag> ("beamspot",
                                                  edm::InputTag("offlineBeamSpot")));
 }

ElectronConversionRejectionValidator::~ElectronConversionRejectionValidator ( )

virtual

Definition at line 86 of file ElectronConversionRejectionValidator.cc.

86 {}

Member Function Documentation

void ElectronConversionRejectionValidator::analyze	(	const edm::Event &	e,
		const edm::EventSetup &	esup
	)

virtual

Implements edm::EDAnalyzer.

Definition at line 200 of file ElectronConversionRejectionValidator.cc.

References funct::abs(), reco::TrackBase::algo(), ChiSquaredProbability(), edm::Event::getByToken(), edm::EventBase::id(), edm::Ref< C, T, F >::isNull(), ConversionTools::matchedConversion(), and reco::TrackBase::pt().

                                                                                                  {
 
   using namespace edm;
 
 
   nEvt_++;
   LogInfo("ElectronConversionRejectionValidator")
       << "ElectronConversionRejectionValidator Analyzing event number: "
       << e.id() << " Global Counter " << nEvt_ <<"\n";
 
   Handle<reco::ConversionCollection> convHandle;
   e.getByToken(convToken_, convHandle);
   if (!convHandle.isValid()) {
     edm::LogError("ElectronConversionRejectionValidator")
         << "Error! Can't get the Conversion collection "<< std::endl;
     return;
   }
 
   Handle<reco::GsfElectronCollection> gsfElectronHandle;
   e.getByToken(gsfElecToken_, gsfElectronHandle);
   const reco::GsfElectronCollection &gsfElectronCollection = *(gsfElectronHandle.product());
   if (!gsfElectronHandle.isValid()) {
     edm::LogError("ElectronConversionRejectionValidator")
         << "Error! Can't get the Electron collection "<< std::endl;
     return;
   }
 
   // offline  Primary vertex
   edm::Handle<reco::VertexCollection> vertexHandle;
   e.getByToken(offline_pvToken_, vertexHandle);
   if (!vertexHandle.isValid()) {
     edm::LogError("ElectronConversionRejectionValidator")
         << "Error! Can't get the product primary Vertex Collection "<< "\n";
     return;
   }
   const reco::Vertex &thevtx = vertexHandle->at(0);
 
   edm::Handle<reco::BeamSpot> bsHandle;
   e.getByToken(beamspotToken_, bsHandle);
   if (!bsHandle.isValid()) {
     edm::LogError("ElectronConversionRejectionValidator")
         << "Error! Can't get the product beamspot Collection "<< "\n";
     return;
   }
   const reco::BeamSpot &thebs = *bsHandle.product();
 
 
   //loop over electrons
   for (reco::GsfElectronCollection::const_iterator iele = gsfElectronCollection.begin(); iele!=gsfElectronCollection.end(); ++iele) {
     //apply basic pre-selection cuts to remove the conversions with obviously displaced tracks which will anyways be
     //removed from the analysis by the hit pattern or impact parameter requirements
     if (iele->pt() < elePtMin_) continue;
     if (iele->gsfTrack()->trackerExpectedHitsInner().numberOfHits() > eleExpectedHitsInnerMax_) continue;
     if ( std::abs(iele->gsfTrack()->dxy(thevtx.position())) > eleD0Max_ ) continue;
 
     //fill information for all electrons
     h_elePtAll_->Fill(iele->pt());
     h_eleEtaAll_->Fill(iele->eta());
     h_elePhiAll_->Fill(iele->phi());
 
 
     //find matching conversion if any
     reco::ConversionRef convref = ConversionTools::matchedConversion(*iele,convHandle,thebs.position());
     //fill information on passing electrons only if there is no matching conversion (electron passed the conversion rejection cut!)
     if (convref.isNull()) {
       h_elePtPass_->Fill(iele->pt());
       h_eleEtaPass_->Fill(iele->eta());
       h_elePhiPass_->Fill(iele->phi());
     }
     else {
       //matching conversion, electron failed conversion rejection cut
       //fill information on electron and matching conversion
       //(Note that in case of multiple matching conversions passing the requirements, the conversion tools returns the one closest to the IP,
       //which is most likely to be the conversion of the primary photon in case there was one.)
 
       //fill electron info
       h_elePtFail_->Fill(iele->pt());
       h_eleEtaFail_->Fill(iele->eta());
       h_elePhiFail_->Fill(iele->phi());
 
       //fill conversion info
       math::XYZVectorF convmom = convref->refittedPairMomentum();
       h_convPt_->Fill(convmom.rho());
       h_convEta_->Fill(convmom.eta());
       h_convPhi_->Fill(convmom.phi());
       h_convRho_->Fill(convref->conversionVertex().position().rho());
       h_convZ_->Fill(convref->conversionVertex().position().z());
       h_convProb_->Fill(ChiSquaredProbability(convref->conversionVertex().chi2(),convref->conversionVertex().ndof()));
 
       //fill information about conversion tracks
       if (convref->tracks().size()<2) continue;
 
       RefToBase<reco::Track> tk1 = convref->tracks().front();
       RefToBase<reco::Track> tk2 = convref->tracks().back();
 
       RefToBase<reco::Track> tklead;
       RefToBase<reco::Track> tktrail;
       if (tk1->pt() >= tk2->pt()) {
         tklead = tk1;
         tktrail = tk2;
       }
       else {
         tklead = tk2;
         tktrail = tk1;
       }
       h_convLeadTrackpt_->Fill(tklead->pt());
       h_convTrailTrackpt_->Fill(tktrail->pt());
       h_convLog10TrailTrackpt_->Fill(log10(tktrail->pt()));
       h_convLeadTrackAlgo_->Fill(tklead->algo());
       h_convTrailTrackAlgo_->Fill(tktrail->algo());
 
     }
   }
 
 }

void ElectronConversionRejectionValidator::beginJob ( void )

virtual

Reimplemented from edm::EDAnalyzer.

Definition at line 91 of file ElectronConversionRejectionValidator.cc.

References dbe_, and cppFunctionSkipper::operator.

                                                      {
 
   nEvt_=0;
   nEntry_=0;
 
   dbe_ = 0;
   dbe_ = edm::Service<DQMStore>().operator->();
 
   //   double dPhiTracksMin = parameters_.getParameter<double>("dPhiTracksMin");
   //   double dPhiTracksMax = parameters_.getParameter<double>("dPhiTracksMax");
   //   int dPhiTracksBin = parameters_.getParameter<int>("dPhiTracksBin");
 
   //   double eoverpMin = parameters_.getParameter<double>("eoverpMin");
   //   double eoverpMax = parameters_.getParameter<double>("eoverpMax");
   //   int    eoverpBin = parameters_.getParameter<int>("eoverpBin");
 
   //  double dEtaTracksMin = parameters_.getParameter<double>("dEtaTracksMin");  // unused
   //  double dEtaTracksMax = parameters_.getParameter<double>("dEtaTracksMax"); // unused
   //  int    dEtaTracksBin = parameters_.getParameter<int>("dEtaTracksBin");  // unused
 
   //   double dCotTracksMin = parameters_.getParameter<double>("dCotTracksMin");
   //   double dCotTracksMax = parameters_.getParameter<double>("dCotTracksMax");
   //   int    dCotTracksBin = parameters_.getParameter<int>("dCotTracksBin");
 
 }

void ElectronConversionRejectionValidator::beginRun	(	edm::Run const &	r,
		edm::EventSetup const &	theEventSetup
	)

virtual

Reimplemented from edm::EDAnalyzer.

Definition at line 189 of file ElectronConversionRejectionValidator.cc.

References bookHistograms().

                                                                                            {
   bookHistograms();
 }

void ElectronConversionRejectionValidator::bookHistograms ( void )

Definition at line 124 of file ElectronConversionRejectionValidator.cc.

References DQMStore::book1D(), dbe_, Pi, PtMinSelector_cfg::ptMin, and DQMStore::setCurrentFolder().

                                                               {
   double ptMin = parameters_.getParameter<double>("ptMin");
   double ptMax = parameters_.getParameter<double>("ptMax");
   int ptBin = parameters_.getParameter<int>("ptBin");
 
   double trackptMin = parameters_.getParameter<double>("trackptMin");
   double trackptMax = parameters_.getParameter<double>("trackptMax");
   int trackptBin = parameters_.getParameter<int>("trackptBin");
 
   double etaMin = parameters_.getParameter<double>("etaMin");
   double etaMax = parameters_.getParameter<double>("etaMax");
   int etaBin = parameters_.getParameter<int>("etaBin");
 
   double phiMin = -TMath::Pi();
   double phiMax =  TMath::Pi();
   int    phiBin = parameters_.getParameter<int>("phiBin");
 
 
   double rhoMin = parameters_.getParameter<double>("rhoMin");
   double rhoMax = parameters_.getParameter<double>("rhoMax");
   int    rhoBin = parameters_.getParameter<int>("rhoBin");
 
   double zMin = parameters_.getParameter<double>("zMin");
   double zMax = parameters_.getParameter<double>("zMax");
   int    zBin = parameters_.getParameter<int>("zBin");
   if (dbe_) {
 
     // SC from reco photons
 
     //TString simfolder = TString(
     //std::string simpath = dqmpath_ + "SimulationInfo";
     dbe_->setCurrentFolder(dqmpath_);
     //
     // simulation information about conversions
     // Histograms for efficiencies
     h_elePtAll_ = dbe_->book1D("elePtAll","# of Electrons",ptBin,ptMin,ptMax);
     h_eleEtaAll_ = dbe_->book1D("eleEtaAll","# of Electrons",etaBin,etaMin,etaMax);
     h_elePhiAll_ = dbe_->book1D("elePhiAll","# of Electrons",phiBin,phiMin,phiMax);
 
     h_elePtPass_ = dbe_->book1D("elePtPass","# of Electrons",ptBin,ptMin,ptMax);
     h_eleEtaPass_ = dbe_->book1D("eleEtaPass","# of Electrons",etaBin,etaMin,etaMax);
     h_elePhiPass_ = dbe_->book1D("elePhiPass","# of Electrons",phiBin,phiMin,phiMax);
 
     h_elePtFail_ = dbe_->book1D("elePtFail","# of Electrons",ptBin,ptMin,ptMax);
     h_eleEtaFail_ = dbe_->book1D("eleEtaFail","# of Electrons",etaBin,etaMin,etaMax);
     h_elePhiFail_ = dbe_->book1D("elePhiFail","# of Electrons",phiBin,phiMin,phiMax);
 
     h_convPt_ = dbe_->book1D("convPt","# of Electrons",ptBin,ptMin,ptMax);
     h_convEta_ = dbe_->book1D("convEta","# of Electrons",etaBin,etaMin,etaMax);
     h_convPhi_ = dbe_->book1D("convPhi","# of Electrons",phiBin,phiMin,phiMax);
     h_convRho_ = dbe_->book1D("convRho","# of Electrons",rhoBin,rhoMin,rhoMax);
     h_convZ_ = dbe_->book1D("convZ","# of Electrons",zBin,zMin,zMax);
     h_convProb_ = dbe_->book1D("convProb","# of Electrons",100,0.0,1.0);
 
     h_convLeadTrackpt_ = dbe_->book1D("convLeadTrackpt","# of Electrons",trackptBin,trackptMin,trackptMax);
     h_convTrailTrackpt_ = dbe_->book1D("convTrailTrackpt","# of Electrons",trackptBin,trackptMin,trackptMax);
     h_convLog10TrailTrackpt_ = dbe_->book1D("convLog10TrailTrackpt","# of Electrons",ptBin,-2.0,3.0);
 
     h_convLeadTrackAlgo_ = dbe_->book1D("convLeadTrackAlgo","# of Electrons",31,-0.5,30.5);
     h_convTrailTrackAlgo_ = dbe_->book1D("convLeadTrackAlgo","# of Electrons",31,-0.5,30.5);
   } // if DQM
 }

void ElectronConversionRejectionValidator::endJob ( void )

virtual

Reimplemented from edm::EDAnalyzer.

Definition at line 322 of file ElectronConversionRejectionValidator.cc.

References dbe_, dumpDBToFile_GT_ttrig_cfg::outputFileName, reco::return(), DQMStore::save(), and AlCaHLTBitMon_QueryRunRegistry::string.

                                                   {
 
 
   std::string outputFileName = parameters_.getParameter<std::string>("OutputFileName");
   if ( ! isRunCentrally_ ) {
     dbe_->save(outputFileName);
   }
 
   edm::LogInfo("ElectronConversionRejectionValidator") << "Analyzed " << nEvt_  << "\n";
   // std::cout  << "::endJob Analyzed " << nEvt_ << " events " << " with total " << nPho_ << " Photons " << "\n";
   //  std::cout  << "ElectronConversionRejectionValidator::endJob Analyzed " << nEvt_ << " events " << "\n";
 
   return ;
 }