|
|
|
#include <DDCoreToDDXMLOutput.h>
Public Member Functions | |
| void | logicalPart (const DDLogicalPart &lp, std::ostream &xos) |
| void | material (const DDMaterial &material, std::ostream &xos) |
| void | position (const DDLogicalPart &parent, const DDLogicalPart &child, DDPosData *edgeToChild, int &rotNameSeed, std::ostream &xos) |
| void | rotation (DDRotation &rotation, std::ostream &xos, const std::string &rotn="") |
| void | solid (const DDSolid &solid, std::ostream &xos) |
| void | specpar (const std::pair< DDsvalues_type, std::set< DDPartSelection * > > &pssv, std::ostream &xos) |
| void | specpar (const DDSpecifics &sp, std::ostream &xos) |
Public Attributes | |
| std::string | ns_ |
| double | tol_ |
Description: The idea is to store one large XML file containing the XML elements in DDL (Detector Description Language). In doing so, all DDAlgorithms or other code generated DD in-memory components should be reproduced without the need for them to run again if the geometry is read into DDLParser again.
Definition at line 25 of file DDCoreToDDXMLOutput.h.
| void DDCoreToDDXMLOutput::logicalPart | ( | const DDLogicalPart & | lp, |
| std::ostream & | xos | ||
| ) |
Definition at line 360 of file DDCoreToDDXMLOutput.cc.
References DDLogicalPart::material(), DDLogicalPart::solid(), and DDBase< N, C >::toString().
Referenced by OutputDDToDDL::beginRun().
| void DDCoreToDDXMLOutput::material | ( | const DDMaterial & | material, |
| std::ostream & | xos | ||
| ) |
Definition at line 280 of file DDCoreToDDXMLOutput.cc.
References DDMaterial::a(), DDMaterial::constituent(), DDMaterial::density(), g, j, DDMaterial::noOfConstituents(), DDBase< N, C >::toString(), and DDMaterial::z().
Referenced by OutputDDToDDL::beginRun().
{
int noc = material.noOfConstituents();
if( noc == 0 )
{
xos << "<ElementaryMaterial name=\"" << material.toString() << "\""
<< " density=\""
<< std::scientific << std::setprecision(5)
<< material.density() / mg * cm3 << "*mg/cm3\""
<< " atomicWeight=\""
<< std::fixed
<< material.a() / g * mole << "*g/mole\""
<< std::setprecision(0) << std::fixed << " atomicNumber=\"" << material.z() << "\"/>"
<< std::endl;
}
else
{
xos << "<CompositeMaterial name=\"" << material.toString() << "\""
<< " density=\""
<< std::scientific << std::setprecision(5)
<< material.density() / mg * cm3 << "*mg/cm3\""
<< " method=\"mixture by weight\">" << std::endl;
int j=0;
for (; j<noc; ++j)
{
xos << "<MaterialFraction fraction=\""
<< std::fixed << std::setprecision(9)
<< material.constituent(j).second << "\">" << std::endl;
xos << "<rMaterial name=\"" << material.constituent(j).first.name() << "\"/>" << std::endl;
xos << "</MaterialFraction>" << std::endl;
}
xos << "</CompositeMaterial>" << std::endl;
}
// return temp;
}
| void DDCoreToDDXMLOutput::position | ( | const DDLogicalPart & | parent, |
| const DDLogicalPart & | child, | ||
| DDPosData * | edgeToChild, | ||
| int & | rotNameSeed, | ||
| std::ostream & | xos | ||
| ) |
Definition at line 368 of file DDCoreToDDXMLOutput.cc.
References DDPosData::copyno_, DDRotation::matrix(), DDPosData::rot_, rotation(), AlCaHLTBitMon_QueryRunRegistry::string, DDBase< N, C >::toString(), and DDPosData::translation().
Referenced by OutputDDToDDL::beginRun().
{
std::string rotName = edgeToChild->rot_.toString();
DDRotationMatrix myIDENT;
xos << "<PosPart copyNumber=\"" << edgeToChild->copyno_ << "\">" << std::endl;
xos << "<rParent name=\"" << parent.toString() << "\"/>" << std::endl;
xos << "<rChild name=\"" << child.toString() << "\"/>" << std::endl;
if( *(edgeToChild->rot_.matrix()) != myIDENT )
{
if( rotName == ":" )
{
rotation(edgeToChild->rot_, xos);
}
else
{
xos << "<rRotation name=\"" << rotName << "\"/>" << std::endl;
}
} // else let default Rotation matrix be created?
// xos << std::fixed << std::setprecision(4);
xos << "<Translation x=\"" << edgeToChild->translation().x() <<"*mm\""
<< " y=\"" << edgeToChild->translation().y() <<"*mm\""
<< " z=\"" << edgeToChild->translation().z() <<"*mm\"/>" << std::endl;
// xos << std::fixed << std::setprecision(6);
xos << "</PosPart>" << std::endl;
}
| void DDCoreToDDXMLOutput::rotation | ( | DDRotation & | rotation, |
| std::ostream & | xos, | ||
| const std::string & | rotn = "" |
||
| ) |
Definition at line 317 of file DDCoreToDDXMLOutput.cc.
References CastorDataFrameFilter_impl::check(), gather_cfg::cout, DDRotation::matrix(), makeMuonMisalignmentScenario::rot, AlCaHLTBitMon_QueryRunRegistry::string, DDBase< N, C >::toString(), x, detailsBasic3DVector::y, and z.
Referenced by OutputDDToDDL::beginRun(), and position().
{
double tol = 1.0e-3; // Geant4 compatible
DD3Vector x,y,z;
rotation.matrix()->GetComponents(x,y,z);
double check = (x.Cross(y)).Dot(z); // in case of a LEFT-handed orthogonal system
// this must be -1
bool reflection((1.-check)>tol);
std::string rotName=rotation.toString();
if( rotName == ":" )
{
if( rotn != "" )
{
rotName = rotn;
std::cout << "about to try to make a new DDRotation... should fail!" << std::endl;
DDRotation rot( DDName(rotn), rotation.matrix() );
std:: cout << "new rotation: " << rot << std::endl;
}
else
{
std::cout << "WARNING: MAKING AN UNNAMED ROTATION" << std::endl;
}
}
if( !reflection )
{
xos << "<Rotation ";
}
else
{
xos << "<ReflectionRotation ";
}
// xos << std::fixed << std::setprecision(4);
xos << "name=\"" << rotName << "\""
<< " phiX=\"" << x.phi()/deg << "*deg\""
<< " thetaX=\"" << x.theta()/deg << "*deg\""
<< " phiY=\"" << y.phi()/deg << "*deg\""
<< " thetaY=\"" << y.theta()/deg << "*deg\""
<< " phiZ=\"" << z.phi()/deg << "*deg\""
<< " thetaZ=\"" << z.theta()/deg << "*deg\"/>"
<< std::endl;
// xos << std::fixed << std::setprecision(6);
}
| void DDCoreToDDXMLOutput::solid | ( | const DDSolid & | solid, |
| std::ostream & | xos | ||
| ) |
Definition at line 15 of file DDCoreToDDXMLOutput.cc.
References DDTrap::alpha1(), DDTrap::alpha2(), DDPseudoTrap::atMinusZ(), DDTruncTubs::cutAtDelta(), DDTruncTubs::cutAtStart(), DDTruncTubs::cutInside(), dd_not_init, ddbox, ddcons, ddintersection, ddpolycone_rrz, ddpolycone_rz, ddpolyhedra_rrz, ddpolyhedra_rz, ddpseudotrap, ddreflected, ddshapeless, ddsubtraction, ddtorus, ddtrap, ddtrunctubs, ddtubs, ddunion, DDTorus::deltaPhi(), DDPolyhedra::deltaPhi(), DDTruncTubs::deltaPhi(), DDTubs::deltaPhi(), DDCons::deltaPhi(), DDPolycone::deltaPhi(), Exception, DDBox::halfX(), DDBox::halfY(), DDTrap::halfZ(), DDBox::halfZ(), DDPseudoTrap::halfZ(), i, DDTrap::phi(), DDCons::phiFrom(), DDPseudoTrap::radius(), DDTubs::rIn(), DDTruncTubs::rIn(), DDCons::rInMinusZ(), DDCons::rInPlusZ(), DDTorus::rMax(), DDPolyhedra::rMaxVec(), DDPolycone::rMaxVec(), DDTorus::rMin(), DDPolycone::rMinVec(), DDPolyhedra::rMinVec(), DDBooleanSolid::rotation(), DDTruncTubs::rOut(), DDTubs::rOut(), DDCons::rOutMinusZ(), DDCons::rOutPlusZ(), DDTorus::rTorus(), DDPolycone::rVec(), DDPolyhedra::rVec(), DDSolid::shape(), DDPolyhedra::sides(), DDBooleanSolid::solidA(), DDBooleanSolid::solidB(), DDPolycone::startPhi(), DDTruncTubs::startPhi(), DDTubs::startPhi(), DDPolyhedra::startPhi(), DDTorus::startPhi(), AlCaHLTBitMon_QueryRunRegistry::string, DDTrap::theta(), DDBase< N, C >::toString(), DDBooleanSolid::translation(), DDReflectionSolid::unreflected(), DDTrap::x1(), DDPseudoTrap::x1(), DDTrap::x2(), DDPseudoTrap::x2(), DDTrap::x3(), DDTrap::x4(), DDPseudoTrap::y1(), DDTrap::y1(), DDPseudoTrap::y2(), DDTrap::y2(), DDTubs::zhalf(), DDCons::zhalf(), DDTruncTubs::zHalf(), DDPolycone::zVec(), and DDPolyhedra::zVec().
Referenced by OutputDDToDDL::beginRun().
{
switch( solid.shape())
{
case ddunion:
case ddsubtraction:
case ddintersection:
{
DDBooleanSolid rs( solid );
if( solid.shape() == ddunion )
{
xos << "<UnionSolid ";
}
else if( solid.shape() == ddsubtraction )
{
xos << "<SubtractionSolid ";
}
else if( solid.shape() == ddintersection )
{
xos << "<IntersectionSolid ";
}
xos << "name=\"" << rs.toString() << "\">" << std::endl;
// if translation is == identity there are no parameters.
// if there is no rotation the name will be ":"
xos << "<rSolid name=\"" << rs.solidA().toString() << "\"/>" << std::endl;
xos << "<rSolid name=\"" << rs.solidB().toString() << "\"/>" << std::endl;
xos << "<Translation x=\"" << rs.translation().X() << "*mm\"";
xos << " y=\"" << rs.translation().Y() << "*mm\"";
xos << " z=\"" << rs.translation().Z() << "*mm\"";
xos << "/>" << std::endl;
std::string rotName = rs.rotation().toString();
if( rotName == ":" )
{
rotName = "gen:ID";
}
xos << "<rRotation name=\"" << rs.rotation().toString() << "\"/>" << std::endl;
if( solid.shape() == ddunion )
{
xos << "</UnionSolid>" << std::endl;
}
else if( solid.shape() == ddsubtraction )
{
xos << "</SubtractionSolid>" << std::endl;
}
else if( solid.shape() == ddintersection )
{
xos << "</IntersectionSolid>" << std::endl;
}
break;
}
case ddreflected:
{
/*
<ReflectionSolid name="trd2mirror">
<rSolid name="trd2"/>
</ReflectionSolid>
*/
DDReflectionSolid rs(solid);
xos << "<ReflectionSolid name=\"" << rs.toString() << "\">" << std::endl;
xos << "<rSolid name=\"" << rs.unreflected().toString() << "\">" << std::endl;
xos << "</ReflectionSolid>" << std::endl;
break;
}
case ddbox:
{
// <Box name="box1" dx="10*cm" dy="10*cm" dz="10*cm"/>
DDBox rs(solid);
xos << "<Box name=\"" << rs.toString() << "\"" //<< rs.toString() << "\"" //
<< " dx=\"" << rs.halfX() << "*mm\""
<< " dy=\"" << rs.halfY() << "*mm\""
<< " dz=\"" << rs.halfZ() << "*mm\"/>"
<< std::endl;
break;
}
case ddtubs:
{
// <Tubs name="TrackerSupportTubeNomex" rMin="[SupportTubeR1]+[Tol]"
// rMax="[SupportTubeR2]-[Tol]" dz="[SupportTubeL]"
// startPhi="0*deg" deltaPhi="360*deg"/>
DDTubs rs(solid);
xos << "<Tubs name=\"" << rs.toString() << "\""
<< " rMin=\"" << rs.rIn() << "*mm\""
<< " rMax=\"" << rs.rOut() << "*mm\""
<< " dz=\"" << rs.zhalf() << "*mm\""
<< " startPhi=\"" << rs.startPhi()/deg << "*deg\""
<< " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\"/>"
<< std::endl;
break;
}
case ddtrap:
{
// <Trapezoid name="UpL_CSC_for_TotemT1_Plane_2_5_7" dz="[PCB_Epoxy_Thick_3P]/2." alp1="-[Up_Signal_Side_alpL_3P]" alp2="-[Up_Signal_Side_alpL_3P]"
// bl1="[Max_Base_Signal_SideL_3P]/2." tl1="[Up_Min_Base_Signal_SideL_3P]/2." h1="[Up_Height_Signal_SideL_3P]/2."
// h2="[Up_Height_Signal_SideL_3P]/2." bl2="[Max_Base_Signal_SideL_3P]/2." tl2="[Up_Min_Base_Signal_SideL_3P]/2."/>
DDTrap rs(solid);
xos << "<Trapezoid name=\"" << rs.toString() << "\"" //rs.toString() << "\"" //
<< " dz=\"" << rs.halfZ() << "*mm\""
<< " theta=\"" << rs.theta()/deg << "*deg\""
<< " phi=\"" << rs.phi()/deg << "*deg\""
<< " h1=\"" << rs.y1() << "*mm\""
<< " bl1=\"" << rs.x1() << "*mm\""
<< " tl1=\"" << rs.x2() << "*mm\""
<< " alp1=\"" << rs.alpha1()/deg << "*deg\""
<< " h2=\"" << rs.y2() << "*mm\""
<< " bl2=\"" << rs.x3() << "*mm\""
<< " tl2=\"" << rs.x4() << "*mm\""
<< " alp2=\"" << rs.alpha2()/deg << "*deg\"/>"
<< std::endl;
break;
}
case ddcons:
{
DDCons rs(solid);
xos << "<Cone name=\"" << rs.toString() << "\""
<< " dz=\"" << rs.zhalf() << "*mm\""
<< " rMin1=\"" << rs.rInMinusZ() << "*mm\""
<< " rMax1=\"" << rs.rOutMinusZ() << "*mm\""
<< " rMin2=\"" << rs.rInPlusZ() << "*mm\""
<< " rMax2=\"" << rs.rOutPlusZ() << "*mm\""
<< " startPhi=\"" << rs.phiFrom()/deg << "*deg\""
<< " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\"/>"
<< std::endl;
break;
}
case ddpolycone_rz:
{
DDPolycone rs(solid);
xos << "<Polycone name=\"" << rs.toString() << "\""
<< " startPhi=\"" << rs.startPhi()/deg << "*deg\""
<< " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\">"
<< std::endl;
const std::vector<double> & zV(rs.zVec());
const std::vector<double> & rV(rs.rVec());
for ( size_t i = 0; i < zV.size(); ++i ) {
xos << "<RZPoint r=\"" << rV[i] << "*mm\""
<< " z=\"" << zV[i] << "*mm\"/>"
<< std::endl;
}
xos << "</Polycone>" << std::endl;
break;
}
case ddpolyhedra_rz:
{
DDPolyhedra rs(solid);
xos << "<Polyhedra name=\"" << rs.toString() << "\""
<< " numSide=\"" << rs.sides() << "\""
<< " startPhi=\"" << rs.startPhi()/deg << "*deg\""
<< " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\">"
<< std::endl;
const std::vector<double> & zV(rs.zVec());
const std::vector<double> & rV(rs.rVec());
for ( size_t i = 0; i < zV.size(); ++i ) {
xos << "<RZPoint r=\"" << rV[i] << "*mm\""
<< " z=\"" << zV[i] << "*mm\"/>"
<< std::endl;
}
xos << "</Polyhedra>" << std::endl;
break;
}
case ddpolycone_rrz:
{
// <Polycone name="OCMS" startPhi="0*deg" deltaPhi="360*deg" >
// <ZSection z="-[CMSZ1]" rMin="[Rmin]" rMax="[CMSR2]" />
// <ZSection z="-[HallZ]" rMin="[Rmin]" rMax="[CMSR2]" />
// <ZSection z="-[HallZ]" rMin="[Rmin]" rMax="[HallR]" />
// <ZSection z="[HallZ]" rMin="[Rmin]" rMax="[HallR]" />
// <ZSection z="[HallZ]" rMin="[Rmin]" rMax="[CMSR2]" />
// <ZSection z="[CMSZ1]" rMin="[Rmin]" rMax="[CMSR2]" />
DDPolycone rs(solid);
xos << "<Polycone name=\"" << rs.toString() << "\""
<< " startPhi=\"" << rs.startPhi()/deg << "*deg\""
<< " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\">"
<< std::endl;
const std::vector<double> & zV(rs.zVec());
const std::vector<double> & rMinV(rs.rMinVec());
const std::vector<double> & rMaxV(rs.rMaxVec());
for ( size_t i = 0; i < zV.size(); ++i ) {
xos << "<ZSection z=\"" << zV[i] << "*mm\""
<< " rMin=\"" << rMinV[i] << "*mm\""
<< " rMax=\"" << rMaxV[i] << "*mm\"/>"
<< std::endl;
}
xos << "</Polycone>" << std::endl;
break;
}
case ddpolyhedra_rrz:
{
DDPolyhedra rs(solid);
xos << "<Polyhedra name=\"" << rs.toString() << "\""
<< " numSide=\"" << rs.sides() << "\""
<< " startPhi=\"" << rs.startPhi()/deg << "*deg\""
<< " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\">"
<< std::endl;
const std::vector<double> & zV(rs.zVec());
const std::vector<double> & rMinV(rs.rMinVec());
const std::vector<double> & rMaxV(rs.rMaxVec());
for ( size_t i = 0; i < zV.size(); ++i ) {
xos << "<ZSection z=\"" << zV[i] << "*mm\""
<< " rMin=\"" << rMinV[i] << "*mm\""
<< " rMax=\"" << rMaxV[i] << "*mm\"/>"
<< std::endl;
}
xos << "</Polyhedra>" << std::endl;
break;
}
case ddpseudotrap:
{
// <PseudoTrap name="YE3_b" dx1="0.395967*m" dx2="1.86356*m" dy1="0.130*m" dy2="0.130*m" dz="2.73857*m" radius="-1.5300*m" atMinusZ="true"/>
DDPseudoTrap rs(solid);
xos << "<PseudoTrap name=\"" << rs.toString() << "\""
<< " dx1=\"" << rs.x1() << "*mm\""
<< " dx2=\"" << rs.x2() << "*mm\""
<< " dy1=\"" << rs.y1() << "*mm\""
<< " dy2=\"" << rs.y2() << "*mm\""
<< " dz=\"" << rs.halfZ() << "*mm\""
<< " radius=\"" << rs.radius() << "*mm\""
<< " atMinusZ=\"" << ( rs.atMinusZ() ? "true" : "false" ) << "\"/>"
<< std::endl;
break;
}
case ddtrunctubs:
{
// <TruncTubs name="trunctubs1" zHalf="50*cm" rMin="20*cm" rMax="40*cm" startPhi="0*deg" deltaPhi="90*deg" cutAtStart="25*cm" cutAtDelta="35*cm"/>
DDTruncTubs rs(solid);
xos << "<TruncTubs name=\"" << rs.toString() << "\""
<< " zHalf=\"" << rs.zHalf() << "*mm\""
<< " rMin=\"" << rs.rIn() << "*mm\""
<< " rMax=\"" << rs.rOut() << "*mm\""
<< " startPhi=\"" << rs.startPhi()/deg << "*deg\""
<< " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\""
<< " cutAtStart=\"" << rs.cutAtStart() << "*mm\""
<< " cutAtDelta=\"" << rs.cutAtDelta() << "*mm\""
<< " cutInside=\"" << ( rs.cutInside() ? "true" : "false" ) << "\"/>"
<< std::endl;
break;
}
case ddshapeless:
{
DDShapelessSolid rs(solid);
xos << "<ShapelessSolid name=\"" << rs.toString() << "\"/>"
<< std::endl;
break;
}
case ddtorus:
{
// <Torus name="torus" innerRadius="7.5*cm" outerRadius="10*cm" torusRadius="30*cm" startPhi="0*deg" deltaPhi="360*deg"/>
DDTorus rs(solid);
xos << "<Torus name=\"" << rs.toString() << "\""
<< " innerRadius=\"" << rs.rMin() << "*mm\""
<< " outerRadius=\"" << rs.rMax() << "*mm\""
<< " torusRadius=\"" << rs.rTorus() << "*mm\""
<< " startPhi=\"" << rs.startPhi()/deg << "*deg\""
<< " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\"/>"
<< std::endl;
break;
}
// return new PSolid( pstrs(solid.toString()), solid.parameters()
// , solid.shape(), pstrs(""), pstrs(""), pstrs("") );
case dd_not_init:
default:
throw cms::Exception("DDException") << "DDCoreToDDXMLOutput::solid(...) either not inited or no such solid.";
break;
}
}
| void DDCoreToDDXMLOutput::specpar | ( | const std::pair< DDsvalues_type, std::set< DDPartSelection * > > & | pssv, |
| std::ostream & | xos | ||
| ) |
Definition at line 446 of file DDCoreToDDXMLOutput.cc.
References i, DDValue::isEvaluated(), DDValue::name(), alignCSCRings::s, DDValue::size(), AlCaHLTBitMon_QueryRunRegistry::string, DDValue::strings(), and findQualityFiles::v.
{
static std::string madeName("specparname");
static int numspecpars(0);
std::ostringstream ostr;
ostr << numspecpars++;
std::string spname = madeName + ostr.str();
xos << "<SpecPar name=\"" << spname << "\" eval=\"false\">" << std::endl;
std::set<DDPartSelection*>::const_iterator psit = pssv.second.begin();
std::set<DDPartSelection*>::const_iterator psendit = pssv.second.end();
for (; psit != psendit; ++psit) {
xos << "<PartSelector path=\"" << *(*psit) << "\"/>" << std::endl;
}
// ========= ... and iterate over all DDValues...
DDsvalues_type::const_iterator vit(pssv.first.begin()), ved(pssv.first.end());
for(; vit != ved; ++vit)
{
const DDValue & v = vit->second;
size_t s=v.size();
size_t i=0;
// ============ ... all actual values with the same name
const std::vector<std::string>& strvec = v.strings();
if( v.isEvaluated() )
{
for(; i<s; ++i)
{
xos << "<Parameter name=\"" << v.name() << "\""
<< " value=\"" << v[i] << "\""
<< " eval=\"true\"/>" << std::endl;
}
}
else
{
for(; i<s; ++i )
{
xos << "<Parameter name=\"" << v.name() << "\""
<< " value=\"" << strvec[i] << "\""
<< " eval=\"false\"/>" << std::endl;
}
}
}
xos << "</SpecPar>" << std::endl;
}
| void DDCoreToDDXMLOutput::specpar | ( | const DDSpecifics & | sp, |
| std::ostream & | xos | ||
| ) |
Definition at line 401 of file DDCoreToDDXMLOutput.cc.
References i, DDValue::isEvaluated(), DDValue::name(), alignCSCRings::s, DDSpecifics::selection(), DDValue::size(), DDSpecifics::specifics(), DDValue::strings(), DDBase< N, C >::toString(), and findQualityFiles::v.
Referenced by OutputDDToDDL::beginRun().
{
xos << "<SpecPar name=\"" << sp.toString() << "\" eval=\"false\">" << std::endl;
// ========... all the selection strings out as strings by using the DDPartSelection's std::ostream function...
const std::vector<DDPartSelection> sels = sp.selection();
std::vector<DDPartSelection>::const_iterator psit = sels.begin();
std::vector<DDPartSelection>::const_iterator psendit = sels.end();
for(; psit != psendit ; ++psit)
{
xos << "<PartSelector path=\"" << *psit << "\"/>" << std::endl;
}
// ========= ... and iterate over all DDValues...
DDsvalues_type::const_iterator vit(sp.specifics().begin()), ved(sp.specifics().end());
for(; vit != ved; ++vit)
{
const DDValue & v = vit->second;
size_t s=v.size();
size_t i=0;
// ============ ... all actual values with the same name
const std::vector<std::string>& strvec = v.strings();
if( v.isEvaluated())
{
for(; i<s; ++i)
{
xos << "<Parameter name=\"" << v.name() << "\""
<< " value=\"" << v[i] << "\""
<< " eval=\"true\"/>" << std::endl;
}
}
else
{
for(; i<s; ++i )
{
xos << "<Parameter name=\"" << v.name() << "\""
<< " value=\"" << strvec[i] << "\""
<< " eval=\"false\"/>" << std::endl;
}
}
}
xos << "</SpecPar>" << std::endl;
}
| std::string DDCoreToDDXMLOutput::ns_ |
Definition at line 45 of file DDCoreToDDXMLOutput.h.
Referenced by OutputDDToDDL::beginRun().
| double DDCoreToDDXMLOutput::tol_ |
Definition at line 46 of file DDCoreToDDXMLOutput.h.
1.7.3