L1GtAnalyzer Class Reference

#include <L1GtAnalyzer.h>

Inheritance diagram for L1GtAnalyzer:

Public Member Functions
	L1GtAnalyzer (const edm::ParameterSet &)
	~L1GtAnalyzer ()
Public Member Functions inherited from edm::EDAnalyzer
	EDAnalyzer ()
std::string	workerType () const
virtual	~EDAnalyzer ()
Public Member Functions inherited from edm::EDConsumerBase
	EDConsumerBase ()
ProductHolderIndex	indexFrom (EDGetToken, BranchType, TypeID const &) const
void	itemsMayGet (BranchType, std::vector< ProductHolderIndex > &) const
void	itemsToGet (BranchType, std::vector< ProductHolderIndex > &) const
void	labelsForToken (EDGetToken iToken, Labels &oLabels) const
void	updateLookup (BranchType iBranchType, ProductHolderIndexHelper const &)
virtual	~EDConsumerBase ()

Private Member Functions
virtual void	analyze (const edm::Event &, const edm::EventSetup &)
	analyze each event: event loop over various code snippets More...
void	analyzeConditionsInEventBlock (const edm::Event &, const edm::EventSetup &)
	to be used in analyze/produce/filter More...
void	analyzeConditionsInLumiBlock (const edm::LuminosityBlock &, const edm::EventSetup &)
	to be used in beginLuminosityBlock More...
void	analyzeConditionsInRunBlock (const edm::Run &, const edm::EventSetup &)
virtual void	analyzeDecisionReadoutRecord (const edm::Event &, const edm::EventSetup &)
void	analyzeL1GtTriggerMenuLite (const edm::Event &, const edm::EventSetup &)
	analyze: usage of L1GtTriggerMenuLite More...
void	analyzeL1GtUtils (const edm::Event &, const edm::EventSetup &)
void	analyzeL1GtUtilsCore (const edm::Event &, const edm::EventSetup &)
	analyze: usage of L1GtUtils More...
void	analyzeL1GtUtilsEventSetup (const edm::Event &, const edm::EventSetup &)
void	analyzeL1GtUtilsMenuLite (const edm::Event &, const edm::EventSetup &)
	for tests, use only one of the following methods More...
virtual void	analyzeObjectMap (const edm::Event &, const edm::EventSetup &)
	analyze: object map product More...
void	analyzeTrigger (const edm::Event &, const edm::EventSetup &)
	full analysis of an algorithm or technical trigger More...
virtual void	beginJob ()
virtual void	beginLuminosityBlock (const edm::LuminosityBlock &, const edm::EventSetup &)
virtual void	beginRun (const edm::Run &, const edm::EventSetup &)
virtual void	endJob ()
	end of job More...
virtual void	endLuminosityBlock (const edm::LuminosityBlock &, const edm::EventSetup &)
	end section More...
virtual void	endRun (const edm::Run &, const edm::EventSetup &)
void	printOutput (std::ostringstream &)
	print the output stream to the required output, given by m_printOutput More...

Private Attributes
bool	m_analyzeConditionsInEventBlockEnable
bool	m_analyzeConditionsInLumiBlockEnable
bool	m_analyzeConditionsInRunBlockEnable
bool	m_analyzeDecisionReadoutRecordEnable
	enable / disable various analysis methods More...
bool	m_analyzeL1GtTriggerMenuLiteEnable
bool	m_analyzeL1GtUtilsEnable
bool	m_analyzeL1GtUtilsEventSetupEnable
bool	m_analyzeL1GtUtilsMenuLiteEnable
bool	m_analyzeObjectMapEnable
bool	m_analyzeTriggerEnable
unsigned int	m_bitNumber
	a bit number to retrieve the name and the alias More...
edm::InputTag	m_condInEdmInputTag
	input tag for ConditionInEdm products More...
std::string	m_condName
	a condition in the algorithm trigger to test the object maps More...
edm::InputTag	m_l1GmtInputTag
	input tag for muon collection from GMT More...
edm::InputTag	m_l1GtDaqReadoutRecordInputTag
	input tags for GT DAQ product More...
edm::InputTag	m_l1GtObjectMapsInputTag
	input tags for GT object map collection L1GlobalTriggerObjectMaps More...
edm::InputTag	m_l1GtObjectMapTag
	input tags for GT object map collection L1GlobalTriggerObjectMapRecord More...
edm::InputTag	m_l1GtRecordInputTag
	input tags for GT lite product More...
bool	m_l1GtRecordsInputTagProv
edm::InputTag	m_l1GtTmLInputTag
	input tag for L1GtTriggerMenuLite More...
bool	m_l1GtTmLInputTagProv
L1GtUtils	m_l1GtUtils
unsigned int	m_l1GtUtilsConfiguration
	L1 configuration code for L1GtUtils. More...
bool	m_l1GtUtilsConfigureBeginRun
	if true, configure (partially) L1GtUtils in beginRun using getL1GtRunCache More...
std::string	m_l1GtUtilsLogicalExpression
L1GtUtils::LogicalExpressionL1Results	m_logicalExpressionL1Results
L1GtUtils::LogicalExpressionL1Results	m_logicalExpressionL1ResultsProv
std::string	m_nameAlgTechTrig
	an algorithm trigger (name or alias) or a technical trigger name More...
int	m_printOutput
	print output More...
L1RetrieveL1Extra	m_retrieveL1Extra

Additional Inherited Members
Public Types inherited from edm::EDAnalyzer
typedef EDAnalyzer	ModuleType
typedef WorkerT< EDAnalyzer >	WorkerType
Static Public Member Functions inherited from edm::EDAnalyzer
static const std::string &	baseType ()
static void	fillDescriptions (ConfigurationDescriptions &descriptions)
static void	prevalidate (ConfigurationDescriptions &)
Protected Member Functions inherited from edm::EDAnalyzer
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)
CurrentProcessingContext const *	currentContext () const
Protected Member Functions inherited from edm::EDConsumerBase
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)
EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)
template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)
ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...
template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()
void	consumesMany (const TypeToGet &id)
template<BranchType B>
void	consumesMany (const TypeToGet &id)
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)
template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

Detailed Description

Description: test analyzer to illustrate various methods for L1 GT trigger.

Implementation: <TODO: enter implementation details>

Author

: Vasile Mihai Ghete - HEPHY Vienna

$Date$ $Revision$

Definition at line 41 of file L1GtAnalyzer.h.

Constructor & Destructor Documentation

L1GtAnalyzer::L1GtAnalyzer ( const edm::ParameterSet &  parSet )

explicit

Definition at line 55 of file L1GtAnalyzer.cc.

References LogDebug, m_bitNumber, m_condName, m_l1GmtInputTag, m_l1GtDaqReadoutRecordInputTag, m_l1GtObjectMapTag, m_l1GtRecordInputTag, m_l1GtRecordsInputTagProv, m_l1GtTmLInputTag, m_l1GtTmLInputTagProv, m_l1GtUtilsConfiguration, m_l1GtUtilsConfigureBeginRun, and m_nameAlgTechTrig.

                                                        :

            m_retrieveL1Extra(
                    parSet.getParameter<edm::ParameterSet> ("L1ExtraInputTags")),

            m_printOutput(parSet.getUntrackedParameter<int>("PrintOutput", 3)),

            m_analyzeDecisionReadoutRecordEnable(parSet.getParameter<bool> ("analyzeDecisionReadoutRecordEnable")),
            //
            m_analyzeL1GtUtilsMenuLiteEnable(parSet.getParameter<bool> ("analyzeL1GtUtilsMenuLiteEnable")),
            m_analyzeL1GtUtilsEventSetupEnable(parSet.getParameter<bool> ("analyzeL1GtUtilsEventSetupEnable")),
            m_analyzeL1GtUtilsEnable(parSet.getParameter<bool> ("analyzeL1GtUtilsEnable")),
            m_analyzeTriggerEnable(parSet.getParameter<bool> ("analyzeTriggerEnable")),
            //
            m_analyzeObjectMapEnable(parSet.getParameter<bool> ("analyzeObjectMapEnable")),
            //
            m_analyzeL1GtTriggerMenuLiteEnable(parSet.getParameter<bool> ("analyzeL1GtTriggerMenuLiteEnable")),
            //
            m_analyzeConditionsInRunBlockEnable(parSet.getParameter<bool> ("analyzeConditionsInRunBlockEnable")),
            m_analyzeConditionsInLumiBlockEnable(parSet.getParameter<bool> ("analyzeConditionsInLumiBlockEnable")),
            m_analyzeConditionsInEventBlockEnable(parSet.getParameter<bool> ("analyzeConditionsInEventBlockEnable")),


            // input tag for GT DAQ product
            m_l1GtDaqReadoutRecordInputTag(parSet.getParameter<edm::InputTag>(
                    "L1GtDaqReadoutRecordInputTag")),

            // input tag for L1GlobalTriggerRecord
            m_l1GtRecordInputTag(parSet.getParameter<edm::InputTag>(
                    "L1GtRecordInputTag")),

            // input tag for GT object map collection L1GlobalTriggerObjectMapRecord
            m_l1GtObjectMapTag(parSet.getParameter<edm::InputTag>(
                    "L1GtObjectMapTag")),

            // input tag for GT object map collection L1GlobalTriggerObjectMaps
            m_l1GtObjectMapsInputTag(parSet.getParameter<edm::InputTag>(
                    "L1GtObjectMapsInputTag")),

            // input tag for muon collection from GMT
            m_l1GmtInputTag(parSet.getParameter<edm::InputTag>(
                    "L1GmtInputTag")),

            // input tag for L1GtTriggerMenuLite
            m_l1GtTmLInputTag(parSet.getParameter<edm::InputTag> (
                    "L1GtTmLInputTag")),

            // input tag for ConditionInEdm products
            m_condInEdmInputTag(parSet.getParameter<edm::InputTag> (
                            "CondInEdmInputTag")),

            // an algorithm and a condition in that algorithm to test the object maps
            m_nameAlgTechTrig(parSet.getParameter<std::string> ("AlgorithmName")),
            m_condName(parSet.getParameter<std::string> ("ConditionName")),
            m_bitNumber(parSet.getParameter<unsigned int> ("BitNumber")),

            m_l1GtUtilsConfiguration(parSet.getParameter<unsigned int> ("L1GtUtilsConfiguration")),
            m_l1GtTmLInputTagProv(parSet.getParameter<bool> ("L1GtTmLInputTagProv")),
            m_l1GtRecordsInputTagProv(parSet.getParameter<bool> ("L1GtRecordsInputTagProv")),
            m_l1GtUtilsConfigureBeginRun(parSet.getParameter<bool> ("L1GtUtilsConfigureBeginRun")), 
            m_l1GtUtilsLogicalExpression(parSet.getParameter<std::string>("L1GtUtilsLogicalExpression")), 
            m_logicalExpressionL1ResultsProv(m_l1GtUtilsLogicalExpression, m_l1GtUtils),
            m_logicalExpressionL1Results(m_l1GtUtilsLogicalExpression, m_l1GtUtils, m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag)

{


    LogDebug("L1GtAnalyzer")
            << "\n Input parameters for L1 GT test analyzer"
            << "\n   L1 GT DAQ product:            "
            << m_l1GtDaqReadoutRecordInputTag
            << "\n   L1GlobalTriggerRecord product:           "
            << m_l1GtRecordInputTag
            << "\n   L1 GT object map collection:  "
            << m_l1GtObjectMapTag
            << "\n   Muon collection from GMT:     "
            << m_l1GmtInputTag
            << "\n   L1 trigger menu lite product: "
            << m_l1GtTmLInputTag
            << "\n   Algorithm name or alias, technical trigger name:  " << m_nameAlgTechTrig
            << "\n   Condition, if an algorithm trigger is requested:   " << m_condName
            << "\n   Bit number for an algorithm or technical trigger: " << m_bitNumber
            << "\n   Requested L1 trigger configuration: " << m_l1GtUtilsConfiguration
            << "\n   Retrieve input tag from provenance for L1GtTriggerMenuLite in the L1GtUtils: "
            << m_l1GtTmLInputTagProv
            << "\n   Retrieve input tag from provenance for L1GlobalTriggerReadoutRecord "
            << "\n   and / or L1GlobalTriggerRecord in the L1GtUtils: "
            << m_l1GtRecordsInputTagProv
            << "\n   Configure L1GtUtils in beginRun(...): "
            << m_l1GtUtilsConfigureBeginRun
            << " \n" << std::endl;
    
}

L1GtAnalyzer::~L1GtAnalyzer

(

)

Definition at line 150 of file L1GtAnalyzer.cc.

                            {

    // empty

}

Member Function Documentation

void L1GtAnalyzer::analyze ( const edm::Event &  iEvent, const edm::EventSetup &  evSetup  )

privatevirtual

analyze each event: event loop over various code snippets

Implements edm::EDAnalyzer.

Definition at line 1797 of file L1GtAnalyzer.cc.

References analyzeConditionsInEventBlock(), analyzeDecisionReadoutRecord(), analyzeL1GtTriggerMenuLite(), analyzeL1GtUtils(), analyzeL1GtUtilsEventSetup(), analyzeL1GtUtilsMenuLite(), analyzeObjectMap(), analyzeTrigger(), m_analyzeConditionsInEventBlockEnable, m_analyzeDecisionReadoutRecordEnable, m_analyzeL1GtUtilsEnable, m_analyzeL1GtUtilsEventSetupEnable, m_analyzeL1GtUtilsMenuLiteEnable, m_analyzeObjectMapEnable, m_analyzeTriggerEnable, and m_l1GtUtilsConfiguration.

                                      {

    // analyze: decision and decision word
    //   bunch cross in event BxInEvent = 0 - L1Accept event
    if (m_analyzeDecisionReadoutRecordEnable) {
        analyzeDecisionReadoutRecord(iEvent, evSetup);
    }

    // analyze: decision for a given algorithm using L1GtUtils functions
    //   for tests, use only one of the following methods

    switch (m_l1GtUtilsConfiguration) {
        case 0: {
            if (m_analyzeL1GtUtilsMenuLiteEnable) {
                analyzeL1GtUtilsMenuLite(iEvent, evSetup);
            }

            // full analysis of an algorithm or technical trigger
            if (m_analyzeTriggerEnable) {
                analyzeTrigger(iEvent, evSetup);
            }

        }
            break;
        case 100000: {
            if (m_analyzeL1GtUtilsEnable) {
                analyzeL1GtUtils(iEvent, evSetup);
            }

            // full analysis of an algorithm or technical trigger
            if (m_analyzeTriggerEnable) {
                analyzeTrigger(iEvent, evSetup);
            }

        }
            break;
        case 200000: {
            if (m_analyzeL1GtUtilsEventSetupEnable) {
                analyzeL1GtUtilsEventSetup(iEvent, evSetup);
            }

            // full analysis of an algorithm or technical trigger
            if (m_analyzeTriggerEnable) {
                analyzeTrigger(iEvent, evSetup);
            }

        }
            break;
        default: {
            // do nothing
        }
            break;
    }

    // analyze: object map product
    if (m_analyzeObjectMapEnable) {
        analyzeObjectMap(iEvent, evSetup);
    }

    // analyze: L1GtTriggerMenuLite
    if (m_analyzeL1GtUtilsMenuLiteEnable) {
        analyzeL1GtTriggerMenuLite(iEvent, evSetup);
    }

    // analyze: usage of ConditionsInEdm
    if (m_analyzeConditionsInEventBlockEnable) {
        analyzeConditionsInEventBlock(iEvent, evSetup);
    }

}

void L1GtAnalyzer::analyzeConditionsInEventBlock ( const edm::Event &  iEvent, const edm::EventSetup &  evSetup  )

private

to be used in analyze/produce/filter

Definition at line 1715 of file L1GtAnalyzer.cc.

References edm::EventID::event(), edm::Event::getByLabel(), edm::EventBase::id(), edm::HandleBase::isValid(), LogDebug, edm::EventBase::luminosityBlock(), m_condInEdmInputTag, printOutput(), and edm::Event::run().

Referenced by analyze().

                                      {
    // define an output stream to print into
    // it can then be directed to whatever log level is desired
    std::ostringstream myCoutStream;

    // get ConditionsInEventBlock
    edm::Handle<edm::ConditionsInEventBlock> condInEventBlock;
    iEvent.getByLabel(m_condInEdmInputTag, condInEventBlock);

    if (!condInEventBlock.isValid()) {

        LogDebug("L1GtAnalyzer") << "\nConditionsInEventBlock with \n  "
                << m_condInEdmInputTag
                << "\nrequested in configuration, but not found in the event."
                << "\nExit the method.\n" << std::endl;

        return;
    }

    const boost::uint16_t bstMasterStatusVal =
            condInEventBlock->bstMasterStatus;
    const boost::uint32_t turnCountNumberVal =
            condInEventBlock->turnCountNumber;

    myCoutStream << "\nLHC quantities in event " << iEvent.id().event()
            << " from luminosity section " << iEvent.luminosityBlock()
            << " from run " << iEvent.run() << "\n  BST Master Status = "
            << bstMasterStatusVal << "\n  Turn count number = "
            << turnCountNumberVal << std::endl;

    printOutput(myCoutStream);

}

void L1GtAnalyzer::analyzeConditionsInLumiBlock ( const edm::LuminosityBlock &  iLumi, const edm::EventSetup &  evSetup  )

private

to be used in beginLuminosityBlock

Definition at line 1674 of file L1GtAnalyzer.cc.

References edm::LuminosityBlock::getByLabel(), edm::HandleBase::isValid(), LogDebug, edm::LuminosityBlockBase::luminosityBlock(), m_condInEdmInputTag, printOutput(), and edm::LuminosityBlockBase::run().

Referenced by beginLuminosityBlock().

                                                                       {
    LogDebug("L1GtAnalyzer")
            << "\n**** L1GtAnalyzer::analyzeConditionsInLumiBlock ****\n"
            << std::endl;

    // define an output stream to print into
    // it can then be directed to whatever log level is desired
    std::ostringstream myCoutStream;

    // get ConditionsInLumiBlock
    edm::Handle<edm::ConditionsInLumiBlock> condInLumiBlock;
    iLumi.getByLabel(m_condInEdmInputTag, condInLumiBlock);

    if (!condInLumiBlock.isValid()) {

        LogDebug("L1GtAnalyzer") << "\nConditionsInLumiBlock with \n  "
                << m_condInEdmInputTag
                << "\nrequested in configuration, but not found in the event."
                << "\nExit the method.\n" << std::endl;

        return;
    }

    const boost::uint32_t totalIntensityBeam1Val =
            condInLumiBlock->totalIntensityBeam1;
    const boost::uint32_t totalIntensityBeam2Val =
            condInLumiBlock->totalIntensityBeam2;

    myCoutStream << "\nLHC quantities in luminosity section "

            << iLumi.luminosityBlock() << " from run " << iLumi.run()
            << "\n  Total Intensity Beam 1 (Integer × 10E10 charges)  = "
            << totalIntensityBeam1Val
            << "\n  Total Intensity Beam 2 (Integer × 10E10 charges)  = "
            << totalIntensityBeam2Val << std::endl;

    printOutput(myCoutStream);

}

void L1GtAnalyzer::analyzeConditionsInRunBlock ( const edm::Run &  iRun, const edm::EventSetup &  evSetup  )

private

analyze: usage of ConditionsInEdm

to be used in beginRun

Definition at line 1633 of file L1GtAnalyzer.cc.

References edm::Run::getByLabel(), edm::HandleBase::isValid(), LogDebug, m_condInEdmInputTag, printOutput(), and edm::RunBase::run().

Referenced by beginRun().

                                      {

    LogDebug("L1GtAnalyzer")
            << "\n**** L1GtAnalyzer::analyzeConditionsInRunBlock ****\n"
            << std::endl;

    // define an output stream to print into
    // it can then be directed to whatever log level is desired
    std::ostringstream myCoutStream;

    // get ConditionsInRunBlock
    edm::Handle<edm::ConditionsInRunBlock> condInRunBlock;
    iRun.getByLabel(m_condInEdmInputTag, condInRunBlock);

    if (!condInRunBlock.isValid()) {

        LogDebug("L1GtAnalyzer") << "\nConditionsInRunBlock with \n  "
                << m_condInEdmInputTag
                << "\nrequested in configuration, but not found in the event."
                << "\nExit the method.\n" << std::endl;

        return;
    }

    const boost::uint16_t beamModeVal = condInRunBlock->beamMode;
    const boost::uint16_t beamMomentumVal = condInRunBlock->beamMomentum;
    const boost::uint32_t lhcFillNumberVal = condInRunBlock->lhcFillNumber;

    // print via supplied "print" function
    myCoutStream << "\nLHC quantities in run " << iRun.run()
            << "\n  Beam Mode = " << beamModeVal
            << "\n  Beam Momentum = " << beamMomentumVal << " GeV"
            << "\n  LHC Fill Number = " << lhcFillNumberVal
            << std::endl;

    printOutput(myCoutStream);

}

void L1GtAnalyzer::analyzeDecisionReadoutRecord ( const edm::Event &  iEvent, const edm::EventSetup &  evSetup  )

privatevirtual

analyze: decision and decision word bunch cross in event BxInEvent = 0 - L1Accept event

Definition at line 263 of file L1GtAnalyzer.cc.

References edm::Event::getByLabel(), edm::HandleBase::isValid(), LogDebug, m_l1GtDaqReadoutRecordInputTag, and printOutput().

Referenced by analyze().

{

    LogDebug("L1GtAnalyzer")
    << "\n**** L1GtAnalyzer::analyzeDecisionReadoutRecord ****\n"
    << std::endl;

    // define an output stream to print into
    // it can then be directed to whatever log level is desired
    std::ostringstream myCoutStream;

    // get L1GlobalTriggerReadoutRecord
    edm::Handle<L1GlobalTriggerReadoutRecord> gtReadoutRecord;
    iEvent.getByLabel(m_l1GtDaqReadoutRecordInputTag, gtReadoutRecord);

    if (!gtReadoutRecord.isValid()) {

        LogDebug("L1GtAnalyzer") << "\nL1GlobalTriggerReadoutRecord with \n  "
                << m_l1GtDaqReadoutRecordInputTag
                << "\nrequested in configuration, but not found in the event."
                << "\nExit the method.\n" << std::endl;

        return;
    }

    // get Global Trigger decision and the decision word
    bool gtDecision = gtReadoutRecord->decision();
    DecisionWord gtDecisionWord = gtReadoutRecord->decisionWord();

    // print Global Trigger decision and the decision word
    edm::LogVerbatim("L1GtAnalyzer")
    << "\n GlobalTrigger decision: " << gtDecision << std::endl;

    // print via supplied "print" function (
    gtReadoutRecord->printGtDecision(myCoutStream);

    // print technical trigger word via supplied "print" function
    gtReadoutRecord->printTechnicalTrigger(myCoutStream);

    printOutput(myCoutStream);

}

void L1GtAnalyzer::analyzeL1GtTriggerMenuLite ( const edm::Event &  iEvent, const edm::EventSetup &  evSetup  )

private

analyze: usage of L1GtTriggerMenuLite

Definition at line 1435 of file L1GtAnalyzer.cc.

References edm::Run::getByLabel(), edm::Event::getRun(), edm::HandleBase::isValid(), LogDebug, m_bitNumber, m_l1GtTmLInputTag, m_nameAlgTechTrig, printOutput(), and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by analyze().

                                      {

    LogDebug("L1GtAnalyzer")
    << "\n**** L1GtAnalyzer::analyzeL1GtTriggerMenuLite ****\n"
    << std::endl;

    // define an output stream to print into
    // it can then be directed to whatever log level is desired
    std::ostringstream myCoutStream;

    // get Run Data - the same code can be run in beginRun, with getByLabel from edm::Run
    const edm::Run& iRun = iEvent.getRun();


    // get L1GtTriggerMenuLite
    edm::Handle<L1GtTriggerMenuLite> triggerMenuLite;
    iRun.getByLabel(m_l1GtTmLInputTag, triggerMenuLite);

    if (!triggerMenuLite.isValid()) {

        LogDebug("L1GtAnalyzer") << "\nL1GtTriggerMenuLite with \n  "
                << m_l1GtTmLInputTag
                << "\nrequested in configuration, but not found in the event."
                << "\nExit the method.\n" << std::endl;

        return;
    }

    // print via supplied "print" function
    myCoutStream << (*triggerMenuLite);

    // test the individual methods

    const std::string& triggerMenuInterface =
            triggerMenuLite->gtTriggerMenuInterface();
    const std::string& triggerMenuName = triggerMenuLite->gtTriggerMenuName();
    const std::string& triggerMenuImplementation =
            triggerMenuLite->gtTriggerMenuImplementation();
    const std::string& scaleDbKey = triggerMenuLite->gtScaleDbKey();

    const L1GtTriggerMenuLite::L1TriggerMap& algorithmMap = triggerMenuLite->gtAlgorithmMap();
    const L1GtTriggerMenuLite::L1TriggerMap& algorithmAliasMap =
            triggerMenuLite->gtAlgorithmAliasMap();
    const L1GtTriggerMenuLite::L1TriggerMap& technicalTriggerMap =
            triggerMenuLite->gtTechnicalTriggerMap();

    const std::vector<unsigned int>& triggerMaskAlgoTrig =
            triggerMenuLite->gtTriggerMaskAlgoTrig();
    const std::vector<unsigned int>& triggerMaskTechTrig =
            triggerMenuLite->gtTriggerMaskTechTrig();

    const std::vector<std::vector<int> >& prescaleFactorsAlgoTrig =
            triggerMenuLite->gtPrescaleFactorsAlgoTrig();
    const std::vector<std::vector<int> >& prescaleFactorsTechTrig =
            triggerMenuLite->gtPrescaleFactorsTechTrig();

    // print in the same format as in L1GtTriggerMenuLite definition

    size_t nrDefinedAlgo = algorithmMap.size();
    size_t nrDefinedTech = technicalTriggerMap.size();

    // header for printing algorithms

    myCoutStream << "\n   ********** L1 Trigger Menu - printing   ********** \n"
    << "\nL1 Trigger Menu Interface: " << triggerMenuInterface
    << "\nL1 Trigger Menu Name:      " << triggerMenuName
    << "\nL1 Trigger Menu Implementation: " << triggerMenuImplementation
    << "\nAssociated Scale DB Key: " << scaleDbKey << "\n\n"
    << "\nL1 Physics Algorithms: " << nrDefinedAlgo << " algorithms defined." << "\n\n"
    << "Bit Number "
    << std::right << std::setw(35) << "Algorithm Name" << "  "
    << std::right << std::setw(35) << "Algorithm Alias" << "  "
    << std::right << std::setw(12) << "Trigger Mask";
    for (unsigned iSet = 0; iSet < prescaleFactorsAlgoTrig.size(); iSet++) {
        myCoutStream << std::right << std::setw(10) << "PF Set "
               << std::right << std::setw(2)  << iSet;
    }

    myCoutStream << std::endl;


    for (L1GtTriggerMenuLite::CItL1Trig itTrig = algorithmMap.begin(); itTrig
            != algorithmMap.end(); itTrig++) {

        const unsigned int bitNumber = itTrig->first;
        const std::string& aName = itTrig->second;

        std::string aAlias;
        L1GtTriggerMenuLite::CItL1Trig itAlias = algorithmAliasMap.find(bitNumber);
        if (itAlias != algorithmAliasMap.end()) {
            aAlias = itAlias->second;
        }

        myCoutStream << std::setw(6) << bitNumber << "     "
            << std::right << std::setw(35) << aName << "  "
            << std::right << std::setw(35) << aAlias << "  "
            << std::right << std::setw(12) << triggerMaskAlgoTrig[bitNumber];
        for (unsigned iSet = 0; iSet < prescaleFactorsAlgoTrig.size(); iSet++) {
            myCoutStream << std::right << std::setw(12) << prescaleFactorsAlgoTrig[iSet][bitNumber];
        }

        myCoutStream << std::endl;
    }

    myCoutStream << "\nL1 Technical Triggers: " << nrDefinedTech
            << " technical triggers defined." << "\n\n" << std::endl;
    if (nrDefinedTech) {
        myCoutStream
            << std::right << std::setw(6) << "Bit Number "
            << std::right << std::setw(45) << " Technical trigger name " << "  "
            << std::right << std::setw(12) << "Trigger Mask";
        for (unsigned iSet = 0; iSet < prescaleFactorsTechTrig.size(); iSet++) {
            myCoutStream << std::right << std::setw(10) << "PF Set "
                    << std::right << std::setw(2) << iSet;
        }

        myCoutStream << std::endl;
    }

    for (L1GtTriggerMenuLite::CItL1Trig itTrig = technicalTriggerMap.begin(); itTrig
            != technicalTriggerMap.end(); itTrig++) {

        unsigned int bitNumber = itTrig->first;
        std::string aName = itTrig->second;

        myCoutStream << std::setw(6) << bitNumber << "       "
        << std::right << std::setw(45) << aName
        << std::right << std::setw(12) << triggerMaskTechTrig[bitNumber];
        for (unsigned iSet = 0; iSet < prescaleFactorsTechTrig.size(); iSet++) {
            myCoutStream << std::right << std::setw(12) << prescaleFactorsTechTrig[iSet][bitNumber];
        }

        myCoutStream << std::endl;

    }

    // individual methods

    int errorCode = -1;
    const std::string* algorithmAlias = triggerMenuLite->gtAlgorithmAlias(
            m_bitNumber, errorCode);
    if (errorCode) {
        myCoutStream
                << "\nError code retrieving alias for algorithm with bit number "
                << m_bitNumber << ": " << errorCode << std::endl;
    } else {
        myCoutStream << "\nAlias for algorithm with bit number " << m_bitNumber
                << ": " << (*algorithmAlias) << std::endl;
    }

    errorCode = -1;
    const std::string* algorithmName = triggerMenuLite->gtAlgorithmName(
            m_bitNumber, errorCode);
    if (errorCode) {
        myCoutStream
                << "\nError code retrieving name for algorithm with bit number "
                << m_bitNumber << ": " << errorCode << std::endl;
    } else {
        myCoutStream << "\nName for algorithm with bit number " << m_bitNumber
                << ": " << (*algorithmName) << std::endl;
    }

    errorCode = -1;
    const std::string* techTrigName = triggerMenuLite->gtTechTrigName(
            m_bitNumber, errorCode);
    if (errorCode) {
        myCoutStream
                << "\nError code retrieving name for technical trigger with bit number "
                << m_bitNumber << ": " << errorCode << std::endl;
    } else {
        myCoutStream << "\nName for technical trigger with bit number "
                << m_bitNumber << ": " << (*techTrigName) << std::endl;
    }

    errorCode = -1;
    const unsigned int bitNumber = triggerMenuLite->gtBitNumber(
            m_nameAlgTechTrig, errorCode);
    if (errorCode) {
        myCoutStream
                << "\nError code retrieving bit number for algorithm/technical trigger "
                << m_nameAlgTechTrig << ": " << errorCode << std::endl;
    } else {
        myCoutStream << "\nBit number for algorithm/technical trigger "
                << m_nameAlgTechTrig << ": " << bitNumber << std::endl;
    }

    // not tested
    //errorCode = -1;
    //const bool triggerMenuLite->gtTriggerResult( m_nameAlgTechTrig,
    //        const std::vector<bool>& decWord,  errorCode);


    printOutput(myCoutStream);

}

void L1GtAnalyzer::analyzeL1GtUtils ( const edm::Event &  iEvent, const edm::EventSetup &  evSetup  )

private

Definition at line 1058 of file L1GtAnalyzer.cc.

References analyzeL1GtUtilsCore(), L1GtUtils::getL1GtRunCache(), LogDebug, m_l1GtTmLInputTag, m_l1GtTmLInputTagProv, m_l1GtUtils, useL1EventSetup(), and useL1GtTriggerMenuLite().

Referenced by analyze().

                                      {

    LogDebug("L1GtAnalyzer")
            << "\n**** L1GtAnalyzer::analyzeL1GtUtils: fall-through case ****\n"
            << std::endl;

    // before accessing any result from L1GtUtils, one must retrieve and cache
    // the L1 trigger event setup and the L1GtTriggerMenuLite product
    // add this call in the analyze / produce / filter method of your
    // analyzer / producer / filter

    bool useL1EventSetup = true;
    bool useL1GtTriggerMenuLite = true;

    if (m_l1GtTmLInputTagProv) {

        // input tag for L1GtTriggerMenuLite retrieved from provenance
        m_l1GtUtils.getL1GtRunCache(iEvent, evSetup, useL1EventSetup,
                useL1GtTriggerMenuLite);

    } else {

        // input tag for L1GtTriggerMenuLite explicitly given
        m_l1GtUtils.getL1GtRunCache(iEvent, evSetup, useL1EventSetup,
                useL1GtTriggerMenuLite, m_l1GtTmLInputTag);

    }

    analyzeL1GtUtilsCore(iEvent, evSetup);

}

void L1GtAnalyzer::analyzeL1GtUtilsCore ( const edm::Event &  iEvent, const edm::EventSetup &  evSetup  )

private

analyze: usage of L1GtUtils

Definition at line 307 of file L1GtAnalyzer.cc.

References L1GtUtils::AlgorithmTrigger, L1GtUtils::availableL1Configuration(), L1GtUtils::decision(), L1GtUtils::decisionAfterMask(), L1GtUtils::decisionBeforeMask(), L1GtUtils::LogicalExpressionL1Results::decisionsAfterMask(), L1GtUtils::LogicalExpressionL1Results::decisionsBeforeMask(), L1GtUtils::LogicalExpressionL1Results::errorCodes(), L1GtUtils::LogicalExpressionL1Results::expL1Triggers(), first, L1GtUtils::l1TriggerMenu(), L1GtUtils::l1TriggerMenuImplementation(), edm::EventBase::luminosityBlock(), m_l1GtDaqReadoutRecordInputTag, m_l1GtRecordInputTag, m_l1GtUtils, m_l1GtUtilsLogicalExpression, m_logicalExpressionL1Results, m_logicalExpressionL1ResultsProv, m_nameAlgTechTrig, L1GtUtils::prescaleFactor(), L1GtUtils::LogicalExpressionL1Results::prescaleFactors(), L1GtUtils::prescaleFactorSet(), L1GtUtils::prescaleFactorSetIndex(), printOutput(), edm::Event::run(), edm::second(), L1GtUtils::TechnicalTrigger, L1GtUtils::triggerMask(), L1GtUtils::LogicalExpressionL1Results::triggerMasks(), and L1GtUtils::triggerMaskSet().

Referenced by analyzeL1GtUtils(), analyzeL1GtUtilsEventSetup(), and analyzeL1GtUtilsMenuLite().

                                      {


    // define an output stream to print into
    // it can then be directed to whatever log level is desired
    std::ostringstream myCoutStream;


    // example to access L1 trigger results using public methods from L1GtUtils
    // methods must be called after retrieving the L1 configuration

    // testing which environment is used

    int iErrorCode = -1;
    int l1ConfCode = -1;

    const bool l1Conf = m_l1GtUtils.availableL1Configuration(iErrorCode, l1ConfCode);

    myCoutStream << "\nL1 configuration code: \n"
            << "\n Legend: "
            << "\n      0 - Retrieve L1 trigger configuration from L1GtTriggerMenuLite only"
            << "\n  10000     L1GtTriggerMenuLite product is valid"
            << "\n  99999     L1GtTriggerMenuLite product not valid. Error."
            << "\n"
            << "\n 100000 - Fall through: try first L1GtTriggerMenuLite; if not valid,try event setup."
            << "\n 110000     L1GtTriggerMenuLite product is valid"
            << "\n 120000     L1GtTriggerMenuLite product not valid, event setup valid."
            << "\n 199999     L1GtTriggerMenuLite product not valid, event setup not valid. Error."
            << "\n"
            << "\n 200000 - Retrieve L1 trigger configuration from event setup only."
            << "\n 210000     Event setup valid."
            << "\n 299999     Event setup not valid. Error."
            << "\n"
            << "\n 300000 - No L1 trigger configuration requested to be retrieved. Error"
            << "\n            Must call before using L1GtUtils methods: "
            << "\n                getL1GtRunCache(const edm::Event& iEvent, const edm::EventSetup& evSetup,"
            << "\n                                const bool useL1EventSetup, const bool useL1GtTriggerMenuLite)"
            << "\n"
            << std::endl;


    if (l1Conf) {
        myCoutStream << "\nL1 configuration code:" << l1ConfCode
                << "\nValid L1 trigger configuration." << std::endl;

        myCoutStream << "\nL1 trigger menu name and implementation:" << "\n"
                << m_l1GtUtils.l1TriggerMenu() << "\n"
                << m_l1GtUtils.l1TriggerMenuImplementation() << std::endl;

    } else {
        myCoutStream << "\nL1 configuration code:" << l1ConfCode
                << "\nNo valid L1 trigger configuration available."
                << "\nSee text above for error code interpretation"
                << "\nNo return here, in order to test each method, protected against configuration error."
                << std::endl;
    }



    myCoutStream
            << "\n******** Results found with input tags retrieved from provenance ******** \n"
            << std::endl;

    //
    // no input tags; for the appropriate EDM product, it will be found
    // from provenance

    // the following methods share the same error code, therefore one can check only once
    // the validity of the result

    iErrorCode = -1;

    bool decisionBeforeMaskAlgTechTrig = m_l1GtUtils.decisionBeforeMask(iEvent,
            m_nameAlgTechTrig, iErrorCode);

    bool decisionAfterMaskAlgTechTrig = m_l1GtUtils.decisionAfterMask(iEvent,
            m_nameAlgTechTrig, iErrorCode);

    bool decisionAlgTechTrig = m_l1GtUtils.decision(iEvent, m_nameAlgTechTrig,
            iErrorCode);

    int prescaleFactorAlgTechTrig = m_l1GtUtils.prescaleFactor(iEvent,
            m_nameAlgTechTrig, iErrorCode);

    int triggerMaskAlgTechTrig = m_l1GtUtils.triggerMask(iEvent,
            m_nameAlgTechTrig, iErrorCode);

    myCoutStream << "\n\nMethods:"
            << "\n  decisionBeforeMask(iEvent, m_nameAlgTechTrig, iErrorCode)"
            << "\n  decisionAfterMask(iEvent, m_nameAlgTechTrig, iErrorCode)"
            << "\n  decision(iEvent, m_nameAlgTechTrig, iErrorCode)"
            << "\n  prescaleFactor(iEvent, m_nameAlgTechTrig, iErrorCode)"
            << "\n  triggerMask(iEvent, m_nameAlgTechTrig, iErrorCode)"
            << "\n  triggerMask(m_nameAlgTechTrig,iErrorCode)"
            << "\n\n" << std::endl;


    if (iErrorCode == 0) {
        myCoutStream << "\nDecision before trigger mask for "
                << m_nameAlgTechTrig << ":   " << decisionBeforeMaskAlgTechTrig
                << std::endl;
        myCoutStream << "Decision after trigger mask for " << m_nameAlgTechTrig
                << ":    " << decisionAfterMaskAlgTechTrig << std::endl;
        myCoutStream << "Decision (after trigger mask) for "
                << m_nameAlgTechTrig << ":  " << decisionAlgTechTrig
                << std::endl;

        myCoutStream << "Prescale factor for " << m_nameAlgTechTrig
                << ":                " << prescaleFactorAlgTechTrig
                << std::endl;

        myCoutStream << "Trigger mask for " << m_nameAlgTechTrig
                << ":                   " << triggerMaskAlgTechTrig
                << std::endl;

    } else if (iErrorCode == 1) {
        myCoutStream << "\n" << m_nameAlgTechTrig
                << " does not exist in the L1 menu "
                << m_l1GtUtils.l1TriggerMenu() << "\n" << std::endl;

    } else {
        myCoutStream << "\nError: "
                << "\n  An error was encountered when retrieving decision, mask and prescale factor for "
                << m_nameAlgTechTrig << "\n  L1 Menu: "
                << m_l1GtUtils.l1TriggerMenu() << "\n  Error code: "
                << iErrorCode << std::endl;

    }

    // another method to get the trigger mask (no common errorCode)

    iErrorCode = -1;
    triggerMaskAlgTechTrig = m_l1GtUtils.triggerMask(m_nameAlgTechTrig,
            iErrorCode);

    if (iErrorCode == 0) {
        myCoutStream << "\nTrigger mask for " << m_nameAlgTechTrig
                << "(faster method):    " << triggerMaskAlgTechTrig
                << std::endl;

    } else if (iErrorCode == 1) {
        myCoutStream << "\n" << m_nameAlgTechTrig
                << " does not exist in the L1 menu "
                << m_l1GtUtils.l1TriggerMenu() << "\n" << std::endl;

    } else {
        myCoutStream << "\nError: "
                << "\n  An error was encountered when fast retrieving trigger mask for "
                << m_nameAlgTechTrig << "\n  L1 Menu: "
                << m_l1GtUtils.l1TriggerMenu() << "\n  Error code: "
                << iErrorCode << std::endl;

    }

    // index of the actual prescale factor set, and the actual prescale
    // factor set for algorithm triggers



    L1GtUtils::TriggerCategory trigCategory = L1GtUtils::AlgorithmTrigger;

    myCoutStream << "\nMethods:"
            << "\n  prescaleFactorSetIndex(iEvent, trigCategory, iErrorCode)"
            << "\n  prescaleFactorSet(iEvent, trigCategory,iErrorCode)\n"
            << std::endl;

    iErrorCode = -1;
    const int pfSetIndexAlgorithmTrigger = m_l1GtUtils.prescaleFactorSetIndex(
            iEvent, trigCategory, iErrorCode);

    if (iErrorCode == 0) {
        myCoutStream
                << "\nAlgorithm triggers: index for prescale factor set = "
                << pfSetIndexAlgorithmTrigger << "\nfor run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << ", with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << std::endl;


    } else {
        myCoutStream
                << "\nError encountered when retrieving the prescale factor set index"
                << "\n  for algorithm triggers, for run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << " with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << "\n  Error code: " << iErrorCode << "\n" << std::endl;
    }

    iErrorCode = -1;
    const std::vector<int>& pfSetAlgorithmTrigger =
            m_l1GtUtils.prescaleFactorSet(iEvent, trigCategory, iErrorCode);

    if (iErrorCode == 0) {
        myCoutStream << "\nAlgorithm triggers: prescale factor set index = "
                << pfSetIndexAlgorithmTrigger << "\nfor run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << ", with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << std::endl;

        int iBit = -1;
        for (std::vector<int>::const_iterator cItBit =
                pfSetAlgorithmTrigger.begin(); cItBit
                != pfSetAlgorithmTrigger.end(); ++cItBit) {

            iBit++;
            myCoutStream << "Bit number " << std::right << std::setw(4) << iBit
                    << ": prescale factor = " << (*cItBit) << std::endl;

        }

    } else {
        myCoutStream
                << "\nError encountered when retrieving the prescale factor set "
                << "\n  for algorithm triggers, for run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << " with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << "\n  Error code: " << iErrorCode << "\n" << std::endl;
    }

    // the actual trigger mask set for algorithm triggers

    myCoutStream << "\nMethod:"
            << "\n  triggerMaskSet(trigCategory, iErrorCode)"
            << std::endl;

    iErrorCode = -1;
    const std::vector<unsigned int>& tmSetAlgorithmTrigger =
            m_l1GtUtils.triggerMaskSet(trigCategory, iErrorCode);

    if (iErrorCode == 0) {
        myCoutStream << "\nAlgorithm triggers: trigger mask set for run "
                << iEvent.run() << ", luminosity block "
                << iEvent.luminosityBlock() << ", with L1 menu \n  "
                << m_l1GtUtils.l1TriggerMenu() << "\n" << std::endl;

        int iBit = -1;
        for (std::vector<unsigned int>::const_iterator cItBit =
                tmSetAlgorithmTrigger.begin(); cItBit
                != tmSetAlgorithmTrigger.end(); ++cItBit) {

            iBit++;
            myCoutStream << "Bit number " << std::right << std::setw(4) << iBit
                    << ": trigger mask = " << (*cItBit) << std::endl;

        }

    } else {
        myCoutStream
                << "\nError encountered when retrieving the trigger mask set "
                << "\n  for algorithm triggers, for run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << " with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << "\n  Error code: " << iErrorCode << "\n" << std::endl;
    }




    // index of the actual prescale factor set, and the actual prescale
    // factor set for technical triggers

    trigCategory = L1GtUtils::TechnicalTrigger;

    myCoutStream << "\nMethods:"
            << "\n  prescaleFactorSetIndex(iEvent, trigCategory, iErrorCode)"
            << "\n  prescaleFactorSet(iEvent, trigCategory,iErrorCode)\n"
            << std::endl;

    iErrorCode = -1;
    const int pfSetIndexTechnicalTrigger = m_l1GtUtils.prescaleFactorSetIndex(
            iEvent, trigCategory, iErrorCode);

    if (iErrorCode == 0) {
        myCoutStream
                << "\nTechnical triggers: index for prescale factor set = "
                << pfSetIndexTechnicalTrigger << "\nfor run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << ", with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << "\nMethod: prescaleFactorSetIndex(iEvent, trigCategory, iErrorCode)\n"
                << std::endl;

    } else {
        myCoutStream
                << "\nError encountered when retrieving the prescale factor set index"
                << "\n  for technical triggers, for run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << " with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << "\n  Error code: " << iErrorCode << "\n" << std::endl;
    }

    iErrorCode = -1;
    const std::vector<int>& pfSetTechnicalTrigger =
            m_l1GtUtils.prescaleFactorSet(iEvent, trigCategory, iErrorCode);

    if (iErrorCode == 0) {
        myCoutStream << "\nTechnical triggers: prescale factor set index = "
                << pfSetIndexTechnicalTrigger << "\nfor run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << ", with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << "\nMethod: prescaleFactorSet(iEvent, trigCategory,iErrorCode)\n"
                << std::endl;

        int iBit = -1;
        for (std::vector<int>::const_iterator cItBit =
                pfSetTechnicalTrigger.begin(); cItBit
                != pfSetTechnicalTrigger.end(); ++cItBit) {

            iBit++;
            myCoutStream << "Bit number " << std::right << std::setw(4) << iBit
                    << ": prescale factor = " << (*cItBit) << std::endl;

        }

    } else {
        myCoutStream
                << "\nError encountered when retrieving the prescale factor set "
                << "\n  for technical triggers, for run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << " with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << "\n  Error code: " << iErrorCode << "\n" << std::endl;
    }

    // the actual trigger mask set for technical triggers

    myCoutStream << "\nMethod:"
            << "\n  triggerMaskSet(trigCategory, iErrorCode)"
            << std::endl;

    iErrorCode = -1;
    const std::vector<unsigned int>& tmSetTechnicalTrigger =
            m_l1GtUtils.triggerMaskSet(trigCategory, iErrorCode);

    if (iErrorCode == 0) {
        myCoutStream << "\nTechnical triggers: trigger mask set for run "
                << iEvent.run() << ", luminosity block "
                << iEvent.luminosityBlock() << ", with L1 menu \n  "
                << m_l1GtUtils.l1TriggerMenu() << "\n" << std::endl;

        int iBit = -1;
        for (std::vector<unsigned int>::const_iterator cItBit =
                tmSetTechnicalTrigger.begin(); cItBit
                != tmSetTechnicalTrigger.end(); ++cItBit) {

            iBit++;
            myCoutStream << "Bit number " << std::right << std::setw(4) << iBit
                    << ": trigger mask = " << (*cItBit) << std::endl;

        }

    } else {
        myCoutStream
                << "\nError encountered when retrieving the trigger mask set "
                << "\n  for technical triggers, for run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << " with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << "\n  Error code: " << iErrorCode << "\n" << std::endl;
    }


    // results for logical expressions

    // errorCodes must be called before any other method is used
    const std::vector<std::pair<std::string, int> >& errorCodesProv =
            m_logicalExpressionL1ResultsProv.errorCodes(iEvent);

    const std::vector<L1GtLogicParser::OperandToken>& expL1TriggersProv =
            m_logicalExpressionL1ResultsProv.expL1Triggers();

    const std::vector<std::pair<std::string, bool> >& decisionsBeforeMaskProv =
            m_logicalExpressionL1ResultsProv.decisionsBeforeMask();
    const std::vector<std::pair<std::string, bool> >& decisionsAfterMaskProv =
            m_logicalExpressionL1ResultsProv.decisionsAfterMask();
    const std::vector<std::pair<std::string, int> >& prescaleFactorsProv =
            m_logicalExpressionL1ResultsProv.prescaleFactors();
    const std::vector<std::pair<std::string, int> >& triggerMasksProv =
            m_logicalExpressionL1ResultsProv.triggerMasks();

    myCoutStream << std::endl;
    myCoutStream << "\nLogical expression\n  "
            << m_l1GtUtilsLogicalExpression << std::endl;

    for (size_t iTrig = 0; iTrig < errorCodesProv.size(); ++iTrig) {
        if ((errorCodesProv[iTrig]).second != 0) {
            myCoutStream
                    << "\nError encountered when retrieving L1 results for trigger "
                    << (errorCodesProv[iTrig]).first << " (bit number "
                    << (expL1TriggersProv[iTrig]).tokenNumber << ")\n  for run "
                    << iEvent.run() << ", luminosity block "
                    << iEvent.luminosityBlock() << " with L1 menu \n  "
                    << m_l1GtUtils.l1TriggerMenu() << "\n  Error code: "
                    << (errorCodesProv[iTrig]).second << "\n" << std::endl;

        } else {

            myCoutStream << "\n" << (errorCodesProv[iTrig]).first
                    << " - bit number " << (expL1TriggersProv[iTrig]).tokenNumber
                    << std::endl;

            myCoutStream << "    decision before mask = "
                    << (decisionsBeforeMaskProv[iTrig]).second << std::endl;

            myCoutStream << "    decision after mask  = "
                    << (decisionsAfterMaskProv[iTrig]).second << std::endl;

            myCoutStream << "    prescale factor      = "
                    << (prescaleFactorsProv[iTrig]).second << std::endl;

            myCoutStream << "    trigger mask         = "
                    << (triggerMasksProv[iTrig]).second << std::endl;

            myCoutStream << "    error code           = "
                    << (errorCodesProv[iTrig]).second << std::endl;

        }
    }

    //
    // same methods as above, but with input tag given explicitly, allowing to select
    // the EDM products used to get the results
    
    

    myCoutStream
            << "\n******** Results found with input tags provided in the configuration file ******** \n"
            << "\n  L1GlobalTriggerRecord: " << m_l1GtRecordInputTag
            << "\n  L1GlobalTriggerReadoutRecord: "
            << m_l1GtDaqReadoutRecordInputTag << std::endl;


    // the following methods share the same error code, therefore one can check only once
    // the validity of the result

    iErrorCode = -1;

    bool decisionBeforeMaskAlgTechTrigITag = m_l1GtUtils.decisionBeforeMask(iEvent,
            m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag,
            m_nameAlgTechTrig, iErrorCode);

    bool decisionAfterMaskAlgTechTrigITag = m_l1GtUtils.decisionAfterMask(iEvent,
            m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag,
            m_nameAlgTechTrig, iErrorCode);

    bool decisionAlgTechTrigITag = m_l1GtUtils.decision(iEvent,
            m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag,
            m_nameAlgTechTrig, iErrorCode);

    int prescaleFactorAlgTechTrigITag = m_l1GtUtils.prescaleFactor(iEvent,
            m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag,
            m_nameAlgTechTrig, iErrorCode);

    int triggerMaskAlgTechTrigITag = m_l1GtUtils.triggerMask(iEvent,
            m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag,
            m_nameAlgTechTrig, iErrorCode);

    myCoutStream << "\n\nMethods:"
            << "\n  decisionBeforeMask(iEvent, m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag, m_nameAlgTechTrig, iErrorCode)"
            << "\n  decisionAfterMask(iEvent, m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag, m_nameAlgTechTrig, iErrorCode)"
            << "\n  decision(iEvent, m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag, m_nameAlgTechTrig, iErrorCode)"
            << "\n  prescaleFactor(iEvent, m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag, m_nameAlgTechTrig, iErrorCode)"
            << "\n  triggerMask(iEvent, m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag, m_nameAlgTechTrig, iErrorCode)"
            << "\n\n"
            << std::endl;


    if (iErrorCode == 0) {
        myCoutStream << "\nDecision before trigger mask for "
                << m_nameAlgTechTrig << ":   " << decisionBeforeMaskAlgTechTrigITag
                << std::endl;
        myCoutStream << "Decision after trigger mask for " << m_nameAlgTechTrig
                << ":    " << decisionAfterMaskAlgTechTrigITag << std::endl;
        myCoutStream << "Decision (after trigger mask) for "
                << m_nameAlgTechTrig << ":  " << decisionAlgTechTrigITag
                << std::endl;

        myCoutStream << "Prescale factor for " << m_nameAlgTechTrig
                << ":                " << prescaleFactorAlgTechTrigITag
                << std::endl;

        myCoutStream << "Trigger mask for " << m_nameAlgTechTrig
                << ":                   " << triggerMaskAlgTechTrigITag
                << std::endl;

    } else if (iErrorCode == 1) {
        myCoutStream << "\n" << m_nameAlgTechTrig
                << " does not exist in the L1 menu "
                << m_l1GtUtils.l1TriggerMenu() << "\n" << std::endl;

    } else {
        myCoutStream << "\nError: "
                << "\n  An error was encountered when retrieving decision, mask and prescale factor for "
                << m_nameAlgTechTrig << "\n  L1 Menu: "
                << m_l1GtUtils.l1TriggerMenu() << "\n  Error code: "
                << iErrorCode << std::endl;

    }


    // index of the actual prescale factor set, and the actual prescale
    // factor set for algorithm triggers



    trigCategory = L1GtUtils::AlgorithmTrigger;

    myCoutStream << "\nMethods:"
            << "\n  prescaleFactorSetIndex(iEvent, m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag, trigCategory, iErrorCode)"
            << "\n  prescaleFactorSet(iEvent, m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag, trigCategory,iErrorCode)\n"
            << std::endl;

    iErrorCode = -1;
    const int pfSetIndexAlgorithmTriggerITag = m_l1GtUtils.prescaleFactorSetIndex(
            iEvent, m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag,
            trigCategory, iErrorCode);

    if (iErrorCode == 0) {
        myCoutStream
                << "\nAlgorithm triggers: index for prescale factor set = "
                << pfSetIndexAlgorithmTriggerITag << "\nfor run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << ", with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << std::endl;


    } else {
        myCoutStream
                << "\nError encountered when retrieving the prescale factor set index"
                << "\n  for algorithm triggers, for run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << " with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << "\n  Error code: " << iErrorCode << "\n" << std::endl;
    }

    iErrorCode = -1;
    const std::vector<int>& pfSetAlgorithmTriggerITag =
            m_l1GtUtils.prescaleFactorSet(iEvent, m_l1GtRecordInputTag,
                    m_l1GtDaqReadoutRecordInputTag, trigCategory, iErrorCode);

    if (iErrorCode == 0) {
        myCoutStream << "\nAlgorithm triggers: prescale factor set index = "
                << pfSetIndexAlgorithmTriggerITag << "\nfor run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << ", with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << std::endl;

        int iBit = -1;
        for (std::vector<int>::const_iterator cItBit =
                pfSetAlgorithmTriggerITag.begin(); cItBit
                != pfSetAlgorithmTriggerITag.end(); ++cItBit) {

            iBit++;
            myCoutStream << "Bit number " << std::right << std::setw(4) << iBit
                    << ": prescale factor = " << (*cItBit) << std::endl;

        }

    } else {
        myCoutStream
                << "\nError encountered when retrieving the prescale factor set "
                << "\n  for algorithm triggers, for run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << " with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << "\n  Error code: " << iErrorCode << "\n" << std::endl;
    }






    // index of the actual prescale factor set, and the actual prescale
    // factor set for technical triggers

    trigCategory = L1GtUtils::TechnicalTrigger;

    myCoutStream << "\nMethods:"
            << "\n  prescaleFactorSetIndex(iEvent, m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag, trigCategory, iErrorCode)"
            << "\n  prescaleFactorSet(iEvent, m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag, trigCategory,iErrorCode)\n"
            << std::endl;

    iErrorCode = -1;
    const int pfSetIndexTechnicalTriggerITag = m_l1GtUtils.prescaleFactorSetIndex(
            iEvent, m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag,
            trigCategory, iErrorCode);

    if (iErrorCode == 0) {
        myCoutStream
                << "\nTechnical triggers: index for prescale factor set = "
                << pfSetIndexTechnicalTriggerITag << "\nfor run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << ", with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << std::endl;

    } else {
        myCoutStream
                << "\nError encountered when retrieving the prescale factor set index"
                << "\n  for technical triggers, for run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << " with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << "\n  Error code: " << iErrorCode << "\n" << std::endl;
    }

    iErrorCode = -1;
    const std::vector<int>& pfSetTechnicalTriggerITag =
            m_l1GtUtils.prescaleFactorSet(iEvent, m_l1GtRecordInputTag,
                    m_l1GtDaqReadoutRecordInputTag, trigCategory, iErrorCode);

    if (iErrorCode == 0) {
        myCoutStream << "\nTechnical triggers: prescale factor set index = "
                << pfSetIndexTechnicalTriggerITag << "\nfor run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << ", with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << std::endl;

        int iBit = -1;
        for (std::vector<int>::const_iterator cItBit =
                pfSetTechnicalTriggerITag.begin(); cItBit
                != pfSetTechnicalTriggerITag.end(); ++cItBit) {

            iBit++;
            myCoutStream << "Bit number " << std::right << std::setw(4) << iBit
                    << ": prescale factor = " << (*cItBit) << std::endl;

        }

    } else {
        myCoutStream
                << "\nError encountered when retrieving the prescale factor set "
                << "\n  for technical triggers, for run " << iEvent.run()
                << ", luminosity block " << iEvent.luminosityBlock()
                << " with L1 menu \n  " << m_l1GtUtils.l1TriggerMenu()
                << "\n  Error code: " << iErrorCode << "\n" << std::endl;
    }


    // results for logical expressions

    // errorCodes must be called before any other method is used
    const std::vector<std::pair<std::string, int> >& errorCodes =
            m_logicalExpressionL1Results.errorCodes(iEvent);

    const std::vector<L1GtLogicParser::OperandToken>& expL1Triggers =
            m_logicalExpressionL1Results.expL1Triggers();


    const std::vector<std::pair<std::string, bool> >& decisionsBeforeMask =
            m_logicalExpressionL1Results.decisionsBeforeMask();
    const std::vector<std::pair<std::string, bool> >& decisionsAfterMask =
            m_logicalExpressionL1Results.decisionsAfterMask();
    const std::vector<std::pair<std::string, int> >& prescaleFactors =
            m_logicalExpressionL1Results.prescaleFactors();
    const std::vector<std::pair<std::string, int> >& triggerMasks =
            m_logicalExpressionL1Results.triggerMasks();

    myCoutStream << std::endl;
    myCoutStream << "\nLogical expression\n  "
            << m_l1GtUtilsLogicalExpression << std::endl;

    for (size_t iTrig = 0; iTrig < errorCodes.size(); ++iTrig) {
        if ((errorCodes[iTrig]).second != 0) {
            myCoutStream
                    << "\nError encountered when retrieving L1 results for trigger "
                    << (errorCodes[iTrig]).first << " (bit number "
                    << (expL1Triggers[iTrig]).tokenNumber << ")\n  for run "
                    << iEvent.run() << ", luminosity block "
                    << iEvent.luminosityBlock() << " with L1 menu \n  "
                    << m_l1GtUtils.l1TriggerMenu() << "\n  Error code: "
                    << (errorCodes[iTrig]).second << "\n" << std::endl;

        } else {

            myCoutStream << "\n" << (errorCodes[iTrig]).first
                    << " - bit number " << (expL1Triggers[iTrig]).tokenNumber
                    << std::endl;

            myCoutStream << "    decision before mask = "
                    << (decisionsBeforeMask[iTrig]).second << std::endl;

            myCoutStream << "    decision after mask  = "
                    << (decisionsAfterMask[iTrig]).second << std::endl;

            myCoutStream << "    prescale factor      = "
                    << (prescaleFactors[iTrig]).second << std::endl;

            myCoutStream << "    trigger mask         = "
                    << (triggerMasks[iTrig]).second << std::endl;

            myCoutStream << "    error code           = "
                    << (errorCodes[iTrig]).second << std::endl;

        }
    }


    printOutput(myCoutStream);
}

void L1GtAnalyzer::analyzeL1GtUtilsEventSetup ( const edm::Event &  iEvent, const edm::EventSetup &  evSetup  )

private

Definition at line 1036 of file L1GtAnalyzer.cc.

References analyzeL1GtUtilsCore(), L1GtUtils::getL1GtRunCache(), LogDebug, m_l1GtUtils, useL1EventSetup(), and useL1GtTriggerMenuLite().

Referenced by analyze().

                                      {

    LogDebug("L1GtAnalyzer")
            << "\n**** L1GtAnalyzer::analyzeL1GtUtilsEventSetup ****\n"
            << std::endl;

    // before accessing any result from L1GtUtils, one must retrieve and cache
    // the L1 trigger event setup
    // add this call in the analyze / produce / filter method of your
    // analyzer / producer / filter

    bool useL1EventSetup = true;
    bool useL1GtTriggerMenuLite = false;

    m_l1GtUtils.getL1GtRunCache(iEvent, evSetup, useL1EventSetup,
            useL1GtTriggerMenuLite);

    analyzeL1GtUtilsCore(iEvent, evSetup);

}

void L1GtAnalyzer::analyzeL1GtUtilsMenuLite ( const edm::Event &  iEvent, const edm::EventSetup &  evSetup  )

private

for tests, use only one of the following methods

Definition at line 1004 of file L1GtAnalyzer.cc.

References analyzeL1GtUtilsCore(), L1GtUtils::getL1GtRunCache(), LogDebug, m_l1GtTmLInputTag, m_l1GtTmLInputTagProv, m_l1GtUtils, useL1EventSetup(), and useL1GtTriggerMenuLite().

Referenced by analyze().

                                      {

    LogDebug("L1GtAnalyzer")
            << "\n**** L1GtAnalyzer::analyzeL1GtUtilsMenuLite ****\n"
            << std::endl;

    // before accessing any result from L1GtUtils, one must retrieve and cache
    // the L1GtTriggerMenuLite product
    // add this call in the analyze / produce / filter method of your
    // analyzer / producer / filter

    bool useL1EventSetup = false;
    bool useL1GtTriggerMenuLite = true;

    if (m_l1GtTmLInputTagProv) {

        // input tag for L1GtTriggerMenuLite retrieved from provenance
        m_l1GtUtils.getL1GtRunCache(iEvent, evSetup, useL1EventSetup,
                useL1GtTriggerMenuLite);

    } else {

        // input tag for L1GtTriggerMenuLite explicitly given
        m_l1GtUtils.getL1GtRunCache(iEvent, evSetup, useL1EventSetup,
                useL1GtTriggerMenuLite, m_l1GtTmLInputTag);
    }

    analyzeL1GtUtilsCore(iEvent, evSetup);

}

void L1GtAnalyzer::analyzeObjectMap ( const edm::Event &  iEvent, const edm::EventSetup &  evSetup  )

privatevirtual

analyze: object map product

Definition at line 1370 of file L1GtAnalyzer.cc.

References bookConverter::comb, edm::Event::getByLabel(), edm::HandleBase::isValid(), LogDebug, m_condName, m_l1GtObjectMapTag, m_nameAlgTechTrig, printOutput(), and query::result.

Referenced by analyze().

                                      {

    LogDebug("L1GtAnalyzer")
            << "\n**** L1GtAnalyzer::analyzeObjectMap object map product ****\n"
            << std::endl;

    // define an output stream to print into
    // it can then be directed to whatever log level is desired
    std::ostringstream myCoutStream;

    // get a handle to the object map product
    // the product can come only from emulator - no hardware ObjectMapRecord
    edm::Handle<L1GlobalTriggerObjectMapRecord> gtObjectMapRecord;
    iEvent.getByLabel(m_l1GtObjectMapTag, gtObjectMapRecord);

    if (!gtObjectMapRecord.isValid()) {
        LogDebug("L1GtAnalyzer")
                << "\nWarning: L1GlobalTriggerObjectMapRecord with input tag "
                << m_l1GtObjectMapTag
                << "\nrequested in configuration, but not found in the event."
                << "\nExit the method.\n" << std::endl;

        return;
    }

    // get all object maps
    const std::vector<L1GlobalTriggerObjectMap>& objMapVec =
            gtObjectMapRecord->gtObjectMap();

    // print every object map via the implemented print
    for (std::vector<L1GlobalTriggerObjectMap>::const_iterator it =
            objMapVec.begin(); it != objMapVec.end(); ++it) {

        (*it).print(myCoutStream);
    }

    //
    const CombinationsInCond* comb = gtObjectMapRecord->getCombinationsInCond(
            m_nameAlgTechTrig, m_condName);

    // number of combinations
    if (comb != 0) {
        myCoutStream << "\n  Number of combinations passing ("
                << m_nameAlgTechTrig << ", " << m_condName << "): "
                << comb->size() << std::endl;
    } else {
        myCoutStream << "\n  No combination passes (" << m_nameAlgTechTrig
                << ", " << m_condName << ") " << std::endl;

    }

    // condition result
    const bool result = gtObjectMapRecord->getConditionResult(
            m_nameAlgTechTrig, m_condName);

    myCoutStream << "\n  Result for condition " << m_condName
            << " in algorithm " << m_nameAlgTechTrig << ": " << result
            << std::endl;

    printOutput(myCoutStream);

}

void L1GtAnalyzer::analyzeTrigger ( const edm::Event &  iEvent, const edm::EventSetup &  evSetup  )

private

full analysis of an algorithm or technical trigger

Definition at line 1091 of file L1GtAnalyzer.cc.

References L1GtUtils::availableL1Configuration(), L1GtUtils::decision(), L1GtUtils::decisionAfterMask(), L1GtUtils::decisionBeforeMask(), edm::EventID::event(), edm::Event::getByLabel(), L1GtUtils::getL1GtRunCache(), edm::EventBase::id(), edm::HandleBase::isValid(), L1GtUtils::l1TriggerMenu(), L1GtUtils::l1TriggerMenuImplementation(), LogDebug, LogTrace, edm::EventBase::luminosityBlock(), m_l1GtDaqReadoutRecordInputTag, m_l1GtObjectMapsInputTag, m_l1GtObjectMapTag, m_l1GtRecordInputTag, m_l1GtRecordsInputTagProv, m_l1GtTmLInputTag, m_l1GtTmLInputTagProv, m_l1GtUtils, m_l1GtUtilsConfiguration, m_nameAlgTechTrig, m_retrieveL1Extra, L1GtUtils::prescaleFactor(), L1RetrieveL1Extra::printL1Extra(), printOutput(), L1RetrieveL1Extra::retrieveL1ExtraObjects(), edm::Event::run(), convertSQLiteXML::runNumber, L1GtUtils::triggerMask(), useL1EventSetup(), and useL1GtTriggerMenuLite().

Referenced by analyze().

                                      {

    LogDebug("L1GtAnalyzer") << "\n**** L1GtAnalyzer::analyzeTrigger ****\n"
            << std::endl;

    // define an output stream to print into
    // it can then be directed to whatever log level is desired
    std::ostringstream myCoutStream;

    // print all the stuff if at LogDebug level
    myCoutStream << "\n\nFull analysis of an algorithm or technical trigger"
            << "\nMethod:  L1GtAnalyzer::analyzeTrigger" << "\nTrigger: "
            << m_nameAlgTechTrig << "\n" << std::endl;

    const unsigned int runNumber = iEvent.run();
    const unsigned int lsNumber = iEvent.luminosityBlock();
    const unsigned int eventNumber = iEvent.id().event();

    myCoutStream << "Run: " << runNumber << " LS: " << lsNumber << " Event: "
            << eventNumber << "\n\n" << std::endl;


    // before accessing any result from L1GtUtils, one must retrieve and cache
    // the L1 trigger event setup and the L1GtTriggerMenuLite product
    // add this call in the analyze / produce / filter method of your
    // analyzer / producer / filter

    bool useL1EventSetup = false;
    bool useL1GtTriggerMenuLite = false;

    switch (m_l1GtUtilsConfiguration) {
        case 0: {
            useL1EventSetup = false;
            useL1GtTriggerMenuLite = true;

        }
            break;
        case 100000: {
            useL1EventSetup = true;
            useL1GtTriggerMenuLite = true;

        }
            break;
        case 200000: {
            useL1EventSetup = true;
            useL1GtTriggerMenuLite = false;

        }
            break;
        default: {
            // do nothing
        }
            break;
    }

    if (m_l1GtTmLInputTagProv) {

        // input tag for L1GtTriggerMenuLite retrieved from provenance
        m_l1GtUtils.getL1GtRunCache(iEvent, evSetup, useL1EventSetup,
                useL1GtTriggerMenuLite);

    } else {

        // input tag for L1GtTriggerMenuLite explicitly given
        m_l1GtUtils.getL1GtRunCache(iEvent, evSetup, useL1EventSetup,
                useL1GtTriggerMenuLite, m_l1GtTmLInputTag);

    }

    // testing which environment is used

    int iErrorCode = -1;
    int l1ConfCode = -1;

    const bool l1Conf = m_l1GtUtils.availableL1Configuration(iErrorCode,
            l1ConfCode);

    if (l1Conf) {
        LogDebug("L1GtAnalyzer") << "\nL1 configuration code:" << l1ConfCode
                << "\nValid L1 trigger configuration.\n" << std::endl;

        LogTrace("L1GtAnalyzer") << "\nL1 trigger menu name and implementation:"
                << "\n" << m_l1GtUtils.l1TriggerMenu() << "\n"
                << m_l1GtUtils.l1TriggerMenuImplementation() << "\n"
                << std::endl;

    } else {
        myCoutStream << "\nL1 configuration code:" << l1ConfCode
                << "\nNo valid L1 trigger configuration available."
                << "\nCheck L1GtUtils wiki page for error code interpretation\n"
                << std::endl;
        return;
    }

    // the following methods share the same error code, therefore one can check only once
    // the validity of the result

    iErrorCode = -1;

    bool decisionBeforeMaskAlgTechTrig = false;
    bool decisionAfterMaskAlgTechTrig = false;
    bool decisionAlgTechTrig = false;
    int prescaleFactorAlgTechTrig = -1;
    int triggerMaskAlgTechTrig = -1;

    if (m_l1GtRecordsInputTagProv) {
        decisionBeforeMaskAlgTechTrig = m_l1GtUtils.decisionBeforeMask(iEvent,
                m_nameAlgTechTrig, iErrorCode);

        decisionAfterMaskAlgTechTrig = m_l1GtUtils.decisionAfterMask(iEvent,
                m_nameAlgTechTrig, iErrorCode);

        decisionAlgTechTrig = m_l1GtUtils.decision(iEvent, m_nameAlgTechTrig,
                iErrorCode);

        prescaleFactorAlgTechTrig = m_l1GtUtils.prescaleFactor(iEvent,
                m_nameAlgTechTrig, iErrorCode);

        triggerMaskAlgTechTrig = m_l1GtUtils.triggerMask(iEvent,
                m_nameAlgTechTrig, iErrorCode);

    } else {
        decisionBeforeMaskAlgTechTrig = m_l1GtUtils.decisionBeforeMask(iEvent,
                m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag,
                m_nameAlgTechTrig, iErrorCode);

        decisionAfterMaskAlgTechTrig = m_l1GtUtils.decisionAfterMask(iEvent,
                m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag,
                m_nameAlgTechTrig, iErrorCode);

        decisionAlgTechTrig = m_l1GtUtils.decision(iEvent,
                m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag,
                m_nameAlgTechTrig, iErrorCode);

        prescaleFactorAlgTechTrig = m_l1GtUtils.prescaleFactor(iEvent,
                m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag,
                m_nameAlgTechTrig, iErrorCode);

        triggerMaskAlgTechTrig = m_l1GtUtils.triggerMask(iEvent,
                m_l1GtRecordInputTag, m_l1GtDaqReadoutRecordInputTag,
                m_nameAlgTechTrig, iErrorCode);

    }

    switch (iErrorCode) {
        case 0: {
            // do nothing here
        }
            break;
        case 1: {
            myCoutStream << "\n" << m_nameAlgTechTrig
                    << " does not exist in the L1 menu "
                    << m_l1GtUtils.l1TriggerMenu() << "\n" << std::endl;
            return;
        }
            break;
        default: {
            myCoutStream << "\nError: "
                    << "\n  An error was encountered when retrieving decision, mask and prescale factor for "
                    << m_nameAlgTechTrig << "\n  L1 Menu: "
                    << m_l1GtUtils.l1TriggerMenu() << "\n  Error code: "
                    << iErrorCode
                    << "\n  Check L1GtUtils wiki page for error code interpretation"
                    << std::endl;
        }
            break;
    }

    // retrieve L1Extra
    // for object maps, only BxInEvent = 0 (aka L1A bunch cross) is relevant

    m_retrieveL1Extra.retrieveL1ExtraObjects(iEvent, evSetup);

    // print all L1Extra collections from all BxInEvent
    myCoutStream << "\nL1Extra collections from all BxInEvent" << std::endl;
    m_retrieveL1Extra.printL1Extra(myCoutStream);

    int bxInEvent = 0;
    myCoutStream << "\nL1Extra collections from BxInEvent = 0 (BX for L1A)" << std::endl;
    m_retrieveL1Extra.printL1Extra(myCoutStream, bxInEvent);

    // retrieve L1GlobalTriggerObjectMapRecord and L1GlobalTriggerObjectMaps products
    // the module returns an error code only if both payloads are missing

    int iErrorRecord = 0;

    bool validRecord = false;
    bool gtObjectMapRecordValid = false;

    edm::Handle<L1GlobalTriggerObjectMaps> gtObjectMaps;
    iEvent.getByLabel(m_l1GtObjectMapsInputTag, gtObjectMaps);

    if (gtObjectMaps.isValid()) {

        validRecord = true;

    } else {

        iErrorRecord = 10;
        LogDebug("L1GtAnalyzer") << "\nL1GlobalTriggerObjectMaps with \n  "
                << m_l1GtObjectMapsInputTag << "\nnot found in the event."
                << std::endl;
    }

    edm::Handle<L1GlobalTriggerObjectMapRecord> gtObjectMapRecord;
    iEvent.getByLabel(m_l1GtObjectMapTag, gtObjectMapRecord);

    if (gtObjectMapRecord.isValid()) {

        gtObjectMapRecordValid = true;
        validRecord = true;

    } else {

        iErrorRecord = iErrorRecord + 100;
        LogDebug("L1GtAnalyzer") << "\nL1GlobalTriggerObjectMapRecord with \n  "
                << m_l1GtObjectMapTag << "\nnot found in the event."
                << std::endl;

    }
    
    //FIXME remove when validRecord and gtObjectMapRecordValid are used - avoid warning here :-)
    if (validRecord && gtObjectMapRecordValid) {
        // do nothing
    }


    // get the RPN vector


//    int pfIndexTechTrig = -1;
//    int pfIndexAlgoTrig = -1;
//
//    if (validRecord) {
//        if (gtObjectMapRecordValid) {
//
//            pfIndexTechTrig
//                    = (gtObjectMapRecord->gtFdlWord()).gtPrescaleFactorIndexTech();
//            pfIndexAlgoTrig
//                    = (gtObjectMapRecord->gtFdlWord()).gtPrescaleFactorIndexAlgo();
//
//        } else {
//
//            pfIndexTechTrig
//                    = static_cast<int> (gtObjectMaps->gtPrescaleFactorIndexTech());
//            pfIndexAlgoTrig
//                    = static_cast<int> (gtObjectMaps->gtPrescaleFactorIndexAlgo());
//
//        }
//
//    } else {
//
//        LogDebug("L1GtAnalyzer") << "\nError: "
//                << "\nNo valid L1GlobalTriggerRecord with \n  "
//                << l1GtRecordInputTag << "\nfound in the event."
//                << "\nNo valid L1GlobalTriggerReadoutRecord with \n  "
//                << l1GtReadoutRecordInputTag << "\nfound in the event."
//                << std::endl;
//
//        iError = l1ConfCode + iErrorRecord;
//        return;
//
//    }

    // 
    myCoutStream << "\nResults for trigger " << m_nameAlgTechTrig
            << "\n  Trigger mask:          " << triggerMaskAlgTechTrig
            << "\n  Prescale factor:       " << prescaleFactorAlgTechTrig
            << "\n  Decision before mask:  " << decisionBeforeMaskAlgTechTrig
            << "\n  Decision after mask:   " << decisionAfterMaskAlgTechTrig
            << "\n  Decision (after mask): " << decisionAlgTechTrig << "\n"
            << std::endl;
    

    printOutput(myCoutStream);
}

void L1GtAnalyzer::beginJob ( void  )

privatevirtual

Reimplemented from edm::EDAnalyzer.

Definition at line 157 of file L1GtAnalyzer.cc.

{

    // empty

}

void L1GtAnalyzer::beginLuminosityBlock ( const edm::LuminosityBlock &  iLumi, const edm::EventSetup &  evSetup  )

privatevirtual

Reimplemented from edm::EDAnalyzer.

Definition at line 249 of file L1GtAnalyzer.cc.

References analyzeConditionsInLumiBlock(), and m_analyzeConditionsInLumiBlockEnable.

                                      {

    if (m_analyzeConditionsInLumiBlockEnable) {
        analyzeConditionsInLumiBlock(iLumi, evSetup);
    }

}

void L1GtAnalyzer::beginRun ( const edm::Run &  iRun, const edm::EventSetup &  evSetup  )

privatevirtual

Reimplemented from edm::EDAnalyzer.

Definition at line 164 of file L1GtAnalyzer.cc.

References analyzeConditionsInRunBlock(), L1GtUtils::getL1GtRunCache(), L1GtUtils::LogicalExpressionL1Results::isValid(), L1GtUtils::LogicalExpressionL1Results::logicalExpressionRunUpdate(), m_analyzeConditionsInRunBlockEnable, m_l1GtTmLInputTag, m_l1GtTmLInputTagProv, m_l1GtUtils, m_l1GtUtilsConfiguration, m_l1GtUtilsConfigureBeginRun, m_l1GtUtilsLogicalExpression, m_logicalExpressionL1Results, m_logicalExpressionL1ResultsProv, useL1EventSetup(), and useL1GtTriggerMenuLite().

                                      {

    if (m_analyzeConditionsInRunBlockEnable) {
        analyzeConditionsInRunBlock(iRun, evSetup);
    }

    // L1GtUtils

    if (m_l1GtUtilsConfigureBeginRun) {

        //   for tests, use only one of the following methods for m_l1GtUtilsConfiguration

        bool useL1EventSetup = false;
        bool useL1GtTriggerMenuLite = false;

        switch (m_l1GtUtilsConfiguration) {
            case 0: {
                useL1EventSetup = false;
                useL1GtTriggerMenuLite = true;

            }
                break;
            case 100000: {
                useL1EventSetup = true;
                useL1GtTriggerMenuLite = true;

            }
                break;
            case 200000: {
                useL1EventSetup = true;
                useL1GtTriggerMenuLite = false;

            }
                break;
            default: {
                // do nothing
            }
                break;
        }

        if (m_l1GtTmLInputTagProv) {
            // L1GtTriggerMenuLite input tag from provenance
            m_l1GtUtils.getL1GtRunCache(iRun, evSetup, useL1EventSetup,
                    useL1GtTriggerMenuLite);

        } else {

            // L1GtTriggerMenuLite input tag given in configuration file
            m_l1GtUtils.getL1GtRunCache(iRun, evSetup, useL1EventSetup,
                    useL1GtTriggerMenuLite, m_l1GtTmLInputTag);
        }

        // check if the parsing of the logical expression was successful

        if (m_logicalExpressionL1ResultsProv.isValid()) {
            m_logicalExpressionL1ResultsProv.logicalExpressionRunUpdate(iRun,
                    evSetup);
        } else {
            // do whatever is necessary if parsing fails - the size of all vectors with L1 results is zero in this case
            // a LogWarning message is written in L1GtUtils
        }

//        if (m_logicalExpressionL1Results.isValid()) {
//            m_logicalExpressionL1Results.logicalExpressionRunUpdate(iRun,
//                    evSetup);
//        } else {
//            // do whatever is necessary if parsing fails - the size of all vectors with L1 results is zero in this case
//            // a LogWarning message is written in L1GtUtils
//        }

        // if the logical expression is changed, one has to check it's validity after the logicalExpressionRunUpdate call
        // (...dirty testing with the same logical expression)
        m_logicalExpressionL1Results.logicalExpressionRunUpdate(iRun, evSetup,
                m_l1GtUtilsLogicalExpression);
        if (!(m_logicalExpressionL1Results.isValid())) {
            // do whatever is necessary if parsing fails - the size of all vectors with L1 results is zero in this case
            // a LogWarning message is written in L1GtUtils
        } 

    }

}

void L1GtAnalyzer::endJob ( void  )

privatevirtual

end of job

Reimplemented from edm::EDAnalyzer.

Definition at line 1883 of file L1GtAnalyzer.cc.

                          {

    // empty

}

void L1GtAnalyzer::endLuminosityBlock ( const edm::LuminosityBlock &  iLumi, const edm::EventSetup &  evSetup  )

privatevirtual

end section

Reimplemented from edm::EDAnalyzer.

Definition at line 1870 of file L1GtAnalyzer.cc.

                                      {

    // empty

}

void L1GtAnalyzer::endRun ( const edm::Run &  iRun, const edm::EventSetup &  evSetup  )

privatevirtual

Reimplemented from edm::EDAnalyzer.

Definition at line 1876 of file L1GtAnalyzer.cc.

                                                                          {

    // empty

}

void L1GtAnalyzer::printOutput ( std::ostringstream &  myCout )

private

print the output stream to the required output, given by m_printOutput

Definition at line 1750 of file L1GtAnalyzer.cc.

References gather_cfg::cout, LogTrace, and m_printOutput.

Referenced by analyzeConditionsInEventBlock(), analyzeConditionsInLumiBlock(), analyzeConditionsInRunBlock(), analyzeDecisionReadoutRecord(), analyzeL1GtTriggerMenuLite(), analyzeL1GtUtilsCore(), analyzeObjectMap(), and analyzeTrigger().

                                                       {

    switch (m_printOutput) {
        case 0: {

            std::cout << myCout.str() << std::endl;

        }

            break;
        case 1: {

            LogTrace("L1GtAnalyzer") << myCout.str() << std::endl;

        }
            break;

        case 2: {

            edm::LogVerbatim("L1GtAnalyzer") << myCout.str() << std::endl;

        }

            break;
        case 3: {

            edm::LogInfo("L1GtAnalyzer") << myCout.str();

        }

            break;
        default: {
            std::cout << "\n\n  L1GtAnalyzer: Error - no print output = "
                    << m_printOutput
                    << " defined! \n  Check available values in the cfi file."
                    << "\n" << std::endl;

        }
            break;
    }

    myCout.str("");
    myCout.clear();

}

Member Data Documentation

bool L1GtAnalyzer::m_analyzeConditionsInEventBlockEnable

private

Definition at line 120 of file L1GtAnalyzer.h.

Referenced by analyze().

bool L1GtAnalyzer::m_analyzeConditionsInLumiBlockEnable

private

Definition at line 119 of file L1GtAnalyzer.h.

Referenced by beginLuminosityBlock().

bool L1GtAnalyzer::m_analyzeConditionsInRunBlockEnable

private

Definition at line 118 of file L1GtAnalyzer.h.

Referenced by beginRun().

bool L1GtAnalyzer::m_analyzeDecisionReadoutRecordEnable

private

enable / disable various analysis methods

Definition at line 107 of file L1GtAnalyzer.h.

Referenced by analyze().

bool L1GtAnalyzer::m_analyzeL1GtTriggerMenuLiteEnable

private

Definition at line 116 of file L1GtAnalyzer.h.

bool L1GtAnalyzer::m_analyzeL1GtUtilsEnable

private

Definition at line 111 of file L1GtAnalyzer.h.

Referenced by analyze().

bool L1GtAnalyzer::m_analyzeL1GtUtilsEventSetupEnable

private

Definition at line 110 of file L1GtAnalyzer.h.

Referenced by analyze().

bool L1GtAnalyzer::m_analyzeL1GtUtilsMenuLiteEnable

private

Definition at line 109 of file L1GtAnalyzer.h.

Referenced by analyze().

bool L1GtAnalyzer::m_analyzeObjectMapEnable

private

Definition at line 114 of file L1GtAnalyzer.h.

Referenced by analyze().

bool L1GtAnalyzer::m_analyzeTriggerEnable

private

Definition at line 112 of file L1GtAnalyzer.h.

Referenced by analyze().

unsigned int L1GtAnalyzer::m_bitNumber

private

a bit number to retrieve the name and the alias

Definition at line 152 of file L1GtAnalyzer.h.

Referenced by analyzeL1GtTriggerMenuLite(), and L1GtAnalyzer().

edm::InputTag L1GtAnalyzer::m_condInEdmInputTag

private

input tag for ConditionInEdm products

Definition at line 143 of file L1GtAnalyzer.h.

Referenced by analyzeConditionsInEventBlock(), analyzeConditionsInLumiBlock(), and analyzeConditionsInRunBlock().

std::string L1GtAnalyzer::m_condName

private

a condition in the algorithm trigger to test the object maps

Definition at line 149 of file L1GtAnalyzer.h.

Referenced by analyzeObjectMap(), and L1GtAnalyzer().

edm::InputTag L1GtAnalyzer::m_l1GmtInputTag

private

input tag for muon collection from GMT

Definition at line 137 of file L1GtAnalyzer.h.

Referenced by L1GtAnalyzer().

edm::InputTag L1GtAnalyzer::m_l1GtDaqReadoutRecordInputTag

private

input tags for GT DAQ product

Definition at line 125 of file L1GtAnalyzer.h.

Referenced by analyzeDecisionReadoutRecord(), analyzeL1GtUtilsCore(), analyzeTrigger(), and L1GtAnalyzer().

edm::InputTag L1GtAnalyzer::m_l1GtObjectMapsInputTag

private

input tags for GT object map collection L1GlobalTriggerObjectMaps

Definition at line 134 of file L1GtAnalyzer.h.

Referenced by analyzeTrigger().

edm::InputTag L1GtAnalyzer::m_l1GtObjectMapTag

private

input tags for GT object map collection L1GlobalTriggerObjectMapRecord

Definition at line 131 of file L1GtAnalyzer.h.

Referenced by analyzeObjectMap(), analyzeTrigger(), and L1GtAnalyzer().

edm::InputTag L1GtAnalyzer::m_l1GtRecordInputTag

private

input tags for GT lite product

Definition at line 128 of file L1GtAnalyzer.h.

Referenced by analyzeL1GtUtilsCore(), analyzeTrigger(), and L1GtAnalyzer().

bool L1GtAnalyzer::m_l1GtRecordsInputTagProv

private

if true, use methods in L1GtUtils with the given input tags for L1GlobalTriggerReadoutRecord and / or L1GlobalTriggerRecord from provenance

Definition at line 163 of file L1GtAnalyzer.h.

Referenced by analyzeTrigger(), and L1GtAnalyzer().

edm::InputTag L1GtAnalyzer::m_l1GtTmLInputTag

private

input tag for L1GtTriggerMenuLite

Definition at line 140 of file L1GtAnalyzer.h.

Referenced by analyzeL1GtTriggerMenuLite(), analyzeL1GtUtils(), analyzeL1GtUtilsMenuLite(), analyzeTrigger(), beginRun(), and L1GtAnalyzer().

bool L1GtAnalyzer::m_l1GtTmLInputTagProv

private

if true, use methods in L1GtUtils with the input tag for L1GtTriggerMenuLite from provenance

Definition at line 159 of file L1GtAnalyzer.h.

Referenced by analyzeL1GtUtils(), analyzeL1GtUtilsMenuLite(), analyzeTrigger(), beginRun(), and L1GtAnalyzer().

L1GtUtils L1GtAnalyzer::m_l1GtUtils

private

Definition at line 174 of file L1GtAnalyzer.h.

Referenced by analyzeL1GtUtils(), analyzeL1GtUtilsCore(), analyzeL1GtUtilsEventSetup(), analyzeL1GtUtilsMenuLite(), analyzeTrigger(), and beginRun().

unsigned int L1GtAnalyzer::m_l1GtUtilsConfiguration

private

L1 configuration code for L1GtUtils.

Definition at line 155 of file L1GtAnalyzer.h.

Referenced by analyze(), analyzeTrigger(), beginRun(), and L1GtAnalyzer().

bool L1GtAnalyzer::m_l1GtUtilsConfigureBeginRun

private

if true, configure (partially) L1GtUtils in beginRun using getL1GtRunCache

Definition at line 166 of file L1GtAnalyzer.h.

Referenced by beginRun(), and L1GtAnalyzer().

std::string L1GtAnalyzer::m_l1GtUtilsLogicalExpression

private

expression to test the L1GtUtils methods to retrieve L1 trigger decisions, prescale factors and masks for logical expressions

Definition at line 170 of file L1GtAnalyzer.h.

Referenced by analyzeL1GtUtilsCore(), and beginRun().

L1GtUtils::LogicalExpressionL1Results L1GtAnalyzer::m_logicalExpressionL1Results

private

Definition at line 176 of file L1GtAnalyzer.h.

Referenced by analyzeL1GtUtilsCore(), and beginRun().

L1GtUtils::LogicalExpressionL1Results L1GtAnalyzer::m_logicalExpressionL1ResultsProv

private

Definition at line 175 of file L1GtAnalyzer.h.

Referenced by analyzeL1GtUtilsCore(), and beginRun().

std::string L1GtAnalyzer::m_nameAlgTechTrig

private

an algorithm trigger (name or alias) or a technical trigger name

Definition at line 146 of file L1GtAnalyzer.h.

Referenced by analyzeL1GtTriggerMenuLite(), analyzeL1GtUtilsCore(), analyzeObjectMap(), analyzeTrigger(), and L1GtAnalyzer().

int L1GtAnalyzer::m_printOutput

private

print output

Definition at line 103 of file L1GtAnalyzer.h.

Referenced by printOutput().

L1RetrieveL1Extra L1GtAnalyzer::m_retrieveL1Extra

private

Definition at line 100 of file L1GtAnalyzer.h.

Referenced by analyzeTrigger().